GUARANTEE/WARRANTY FOR – CIVIL INDENTORS The Contractor/Seller hereby declares that the goods/stores, articles sold to the buyer under this contract shall be of the best quality and workmanship and shall be strictly in accordance with the specifications and particulars contained/mentioned in the contract and the contract/seller hereby guarantees that the said goods/stores/articles would continue to confirm to the description and quality aforesaid for a period of 24 months for indigenous stores and 15 months for imported stores from the date of delivery of the said goods/stores/articles to the purchaser and that not withstanding the facts that the Purchaser (Inspector) may have inspected and/or approved the said goods/articles/stores during the aforesaid period of 24/15 months and if the said goods/stores/articles be discovered not to confirm to the description and quality aforesaid or have deteriorated (and the decision of the purchaser in that behalf will be final and conclusive). The purchaser will be entitled to reject the said goods/stores/articles or such portion thereof as may be discovered not to confirm to the said description and quality. On such rejection, the goods/stores/articles will be at sellers risk and all provisions herein contained relating to rejection of goods etc., shall apply. The contractor/seller shall, if so called upon to replace within a period of one month or such further period as may be extended from time to time by the purchaser in its discretion on an application made therefore by the contractor/seller, the goods/stores/articles or such portion thereof as is rejected by the purchaser and in such an event the above mentioned warranty period shall apply to the goods/stores/articles replaced from the date of replacement thereof. The warranty is applicable for a period of 24 months from the date of sale or 20000 kms whichever occurs earlier. The warranty shall be applicable only if all the services are done in accordance with the guidelines set out in the owner’s manual. Followed by the 4 free services during the first year, it is mandatory that customers avail the 3 paid services at 12,000, 15000, and 18,000 kms before 360 days, 450 days and 540 days respectively whichever occurs earlier. FOR DEFENCE INDENTORS The contracting firm shall be responsible for the defects that are attributed to manufacture / assembly, design or material workmanship etc., and the firm shall replace the same free of cost to the satisfaction of the Controller of Quality Assurance (Vehicles) AHMEDNAGER, up to 24,000 Km run or 24 months whichever is earlier from the date of acceptance of the motorcycle. In case of vendor bought out items procured from approved sources, the contracting firm shall give an assurance that such items are as per the standard laid down by the vehicle manufacturer. The minimum warranty as above applicable to the complete vehicle will also be valid for such items
WARRANTY FOR TYRES Tyres supplied by the firm fitted on the vehicles shall carry a guarantee of Two years or 24,000 Kms whichever is earlier from the date of supply against defects which are attributable to defective material / design or faulty workmanship. Warranty period as well as date of acceptance of the motorcycle will be painted on the top of the petrol tank. -------------------------------------------------------DEFENCE ACCESSORIES Price of Accessories- Defence model 1. 2. 3. 4. 5. 6. 7.
Wheel Repair Tool Tail Lamp Light reduction cover Trafficators light reduction cover Head Lamp Light reduction cover Front Bumper Side boxes with fitments &Lachet Fasteners for accessories
Rs. 9.22 Rs. 27.55 Rs. 48.40 Rs. 130.22 Rs. 704.15 Rs.2,126.30 Rs. 112.00
THE ABOVE CHARGES ARE EXCLUSIVE OF EXCISE DUTY AND VAT. HOWEVER IN THE PRICE SCHEDULE UNDER ANNEXURE, THE TOTAL COST OF ACCESSORIES INCLUSIVE OF EXCISE DUTY AND VAT IS INDICATED. ---------------------------------------------------------------------------------------------------FREE SERVICES NON DEFENCE INDENTORS 4 Free services at the following intervals, from the date of sale I. Free Service II Free Service III Free Service IV. Free Service
: 500 kms or 45 + 8 days whichever is earlier : 3000 kms or 90 +15 days whichever is earlier : 6000 kms or 180 +15 days whichever is earlier : 9000 kms or 270 + 15 days whichever is earlier
The above free service coupons are available in the owners manual delivered along with the motorcycle. Please hand over these coupons to the dealer while availing free services. Please note that the cost of consumable used for free services are chargeable to the customers. DEFENCE INDENTORS Free services are not applicable. ----------------------------------------------------------------------------------
LIST OF STANDARD TOOL SUPPLIED WITH ENFILED BULLET 350 UCE MOTORCYCLE (a) Double End Spanner 12 x 10
2 nos
(b) Screw Driver
1 no
(c) Tubular Spanner Big
1 no
(d) Rod for Tubular Spanner
1 no
(e) Tubular Spanner Small
1 no
(f) Canvas Bag
1 no
-----------------------------------------------------------------------LIST OF STANDARD TOOL SUPPLIED WITH ENFILED BULLET ELECTRA UCE MOTORCYCLE (a) Double End Spanner 12 x 10
2 nos
(b) Screw Driver
1 no
(c) Tubular Spanner Big
1 no
(d) Rod for Tubular Spanner
1 no
(e) Tubular Spanner Small
1 no
(f) Canvas Bag
1 no
------------------------------------------------------------------------LIST OF STANDARD TOOL SUPPLIED WITH BULLET 350 UCE (DEFENCE) MOTORCYCLE (a) Tool Wallet 1 no (b) Tommy Bar with 8 mm Allen Key Head 1 no (c) Plug Spanner (16 x 8 mm) 1 no (d) Screw Driver 1 no (e) D/E spanner (10 x 13mm) 1 no (f) D/E spanner (10 x 12mm) 2 nos (g) Tubular Spanner (21 x 24 mm) 1 no (h) First Aid Kit 1 no (i) Tyre Lever 2 nos
TECHNICAL SPEICIECIATION - BULLET 350 UCE, BULLET ELECTRA 350 UCE Sl. No I
II
DESCRIPTION
Drum VEHICLE DATA Model Type Brief Description Category of veh (As per AIS 053)
ES / DISC Bullet 350 - ES Motor cycle L2
Royal Enfield
Royal Enfield
Bore X Stroke, mm No. of Cylinders Displacement Compression Ratio Maximum engine output Kw @ rpm
NA UCE 350 Single Cylinder, 4 Stroke, OHV, Dual Spark Ignition Engine, Air Cooled 70 x 90 mm Single 346cc 8.5:1 14.61Kw @ 5250 rpm
NA UCE 350 -ES Single Cylinder, 4 Stroke, OHV, Dual Spark Ignition Engine, Air Cooled 70 x 90 mm Single 346cc 8.5:1 14.61Kw @ 5250 rpm
Maximum torque, Nm @ rpm
28.0 Nm @ 4000 rpm
28.0 Nm @ 4000 rpm
Paper
Paper
CLUTCH Type
Wet Multi plate
Wet Multi plate
GEAR BOX Make & Model Type No. of gears Gear Ratio (overall) First Second Third Fourth Fifth
Royal Enfield Constant mesh Five Over all 16.68 10.96 8.29 6.6 5.45
Royal Enfield Constant mesh Five Over all 16.68 10.96 8.29 6.6 5.45
ENGINE Make & Country of Origin, if imported Model & Identification
Air cleaner type
IV
BULLET 350 - ES
Bullet 350 UCE Motor cycle L2
Type
III
BULLET 350 UCE
V
VI
STEERING Type and brief description Steering wheel dia, mm Ratio
Handle Bar Type
Handle Bar Type
-
-
OD 38.1X 3.2 Thick
OD 38.1X 3.2 Thick
NA
NA Hydraulic\Gas Filled .
FRAME Long member size, mm Number of cross members
VIII
SHOCK ASBORBER
Hydraulic
IX
BRAKES Service brakes (Brief description) ABS fitter (yes/No)
No Internal Expansion (Drum) 188.2 cm2 NA NA
No Hydraulic Disc Brake Internal Expansion (Drum) 90.7 cm2 NA NA
Front & Rear 1.85 x 19” Spoke Front : 3.25 x 19, 4/6 PR Rear : 3.25 x 19, 4/6 PR
Front & Rear 1.85 x 19” Spoke Front : 3.25 x 19, 4/6 PR Front : 3.25 x 19, 4/6 PR
ELECTRICAL SYSTEM System voltage
12V
12V
Battery rating, Ah
5 Ah
8Ah
Wiper motor Wiping system (Brief description)
NA
NA
NA
NA
Front (disc/drum) Rear (disc/drum) Total braking area Parking brake Secondary brake X
Drum
WHEELS & TYRES Wheel rim size Wheel rim type Tyre size designation incl. Ply rating/ Load index/ Speed rating
XI
XII
FUEL TANK
XII
XIV
XV
Material
Sheet metal
Sheet metal
Capacity
Min 13.5 litres
Min 13.5 litres
1370 740 2180 1070 NA NA
1370 810 2160 1120 NA NA
135
135
NA NA
NA NA
350
350
NA
NA
125 225
125 225
183
187
15 deg,
15 deg,
Two persons (one/one)
Two persons (one/one)
45 -50 Kmpl @ steady speed of 45 50 Kmph.
45 -50 Kmpl @ steady speed of 45 50 Kmph.
DIMENSIONS Wheel base, mm Overall width, mm Overall Length, mm Overall Height, mm Front track, mm Rear track, mm Minimum ground clearance, mm Cargo box dimensions Load body platform area WEIGHTS Maximum GVW, Kg (for rigid vehicle) Maximum GCW, Kg (For articulated/combination vehicle) Maximum, FAW, Kg Maximum, RAW, Kg Kerb weight with 90% fuel ,oil , Accessories , tools etc ( Kg ) Maximum Grade ability in 1st gear SEATING Seating capacity Sketch showing seating layour with dimensions)
XVI
FUEL CONSUMPTION DETAILS
XVII
ANY OTHER DETAILS FOR
RELEVANT FOR THE MODEL ----------------------------------------------------------TECHNICAL SPECIFICATION FOR BULLET 350 - DEFENCE As per CQAV Specification No.IND/VEH/002/2010/A and as amended from time to time will be applicable. -------------------------------------------------------