V7 Draw Latch
200
Over-center · Large · Stainless steel
• Sleek, smooth low profile Latch design • Locking and non-locking • Robust, riveted, tamper- 34.2 resistant construction
Keeper Lock plug (optional)
4.5 (.18) 8 (.32) 16 (.63)
(1.35)
12.5 (.49)
Material and Finish 316 Grade stainless steel electropolished
20 (.79) Non-locking
Lever
23 (.89) Locking
Performance Details
Blade
24 (.94)
12 (.47)
Max. working load: 1200 N (270 lbf) 10 (.39) 2 Countersunk holes for flat head screws
Installation Notes Install assembly with six M3 (No. 4) flat head screws (not supplied)
Keys Overmolded key S008 (pair) Part number: M1-525-39-S008
78.5 (3.09) 1.5 (.05) Lock plate
17 (.67)
Base
4 Countersunk holes for flat head screws
21 (.84)
ACTUAL SIZE 12±0.1 (.472±.004) Ø 3.5±0.1 (.137±.004)
34.2±0.1* (1.346±.004)
Door/frame separation
16±0.1 (.63±.004)
*Gasket recommended to accommodate panel variations
Part Number See table Assembly complete with keeper
www.southco.com/V7
Description
Part Number
Non-locking
V7-20-101-24
Locking keyed alike S008 (2 keys supplied)
V7-20-111-24
Dimensions in millimeters (inch) unless otherwise stated
Request Info
1-800-453-1692 www.aboveboardelectronics.com
V7 Draw Latch
201
Over-center · Large and small · Zinc alloy
Latch
• Sleek, smooth low profile design • Locking and non-locking • Robust, riveted, tamper- resistant construction
Keeper
Large 4 (.16)
Lock plug
34 (1.34)
8 (.32)
32 (1.26)
Lever
Pin
16 (.63) 12 (.47)
Blade
Zinc alloy, chrome plated or powder coated and stainless steel
12 (.47)
24 (.94)
21 (.83)
Material and Finish
Performance Details
ACTUAL SIZE
Max. working load: 1200 N (270 lbf)
10 (.39)
84 (3.29) 1 (.04) Base Lock plate
Ø 3.2±0.1 (.125±.004)
18 (.71)
12±0.1 (.472±.004)
35.5±0.1* (1.398±.004)
Ø 3.2±0.1 (.125±.004)
Installation Notes Install assembly with six M3 (No. 4) flat head screws (not supplied)
Keys 16±0.1 (.63±.004) *Gasket recommended to accommodate panel variations Door/frame separation
21 (.84)
Key S010 (pair) Part number: V7-KEYS
Keeper
Latch Small
Lock plug 31 (1.21)
3 (.14)
28 (1.09)
7 (.27)
30±0.1* (1.181±.004)
14 (.544)
Long pin
Lever
12±0.1 (.472±.004)
Blade 18 (.71)
20 (.79) 72 (2.84) 14 (.57)
Lock plate
5 (.20)
12±0.1 Door/frame Ø 3.2±0.1 (.472±.004) separation (.126±.004) *Gasket recommended to accommodate panel variations
ACTUAL SIZE 17 (.69)
Base
Part Number Selection B Base type 10 Small 20 Large
F Finish 10 Bright chrome plated 20 Satin chrome plated 50 Black powder coated
V7 - B - 1 L - F
Assembly complete with keeper
L Lock style 01 Large non-locking 05 Small non-locking 11 Large locking keyed alike S010 (2 keys supplied) 15 Small locking keyed alike S010 (2 keys supplied) Request Info
Dimensions in millimeters (inch) unless otherwise stated 1-800-453-1692 www.aboveboardelectronics.com
www.southco.com/V7
97 Draw Latch
202
Over-center · Small
• Compact latch • Multiple keeper options for application variances
Base
Lever
Latching spring 8.3 (.33)
12.6 (.50)
Material and Finish Stainless steel or steel, zinc plated
1.6 (.06)
Performance Details
ACTUAL SIZE
Door / frame separation
27.4 (1.08)
0.9 (.035)
Clamping force: 135 N (30 lbf) 7.9 (.31)
Installation Notes Install assembly with M3 (No. 4) round head screws or 3 (.118) rivets (not supplied) For peg style keeper use M3 (No. 4) flat head screws or rivets
9.5 (.38)
0.8 (.03)
6 (.23)
21.6 (.85)
22.6 (.89) Unstressed (unlatched)
Keepers Concealed 1 Hole 1 Lug
Concealed 2 Hole
Single Hole Peg Style
Exposed Single Hole
Exposed 1 Hole 1 Lug
10.7 (.42) 7.5 3.6 (.30) (.14)
0.8 (.03) 3.6 (.14) 14.3 (.56)
Two Hole Keepers
Order latch and keeper separately
S
5.5 (.218)
9.5 (.375)
Door / frame separation
S
9.5 (.375)
Latching point
24 (.95)
Part Number Keepers
Material
Steel Stainless Steel
Latch
Concealed 2 Hole
Concealed 1 Hole 1 Lug
Single Hole Peg Style
Exposed Single Hole
Exposed 1 Hole 1 Lug
97-30-160-11
97-37-103-11
97-37-101-11
97-37-105-11
97-37-104-11
97-37-102-11
97-30-160-12
97-37-103-24
97-37-101-24
97-37-105-24
97-37-104-24
97-37-102-24
14.7 (.58)
14.7 (.58)
21.8 (.86)
33 (1.30)
27.4 (1.08)
S Dimension
www.southco.com/97
Latch Only
Ø 3.3 (.128) all mounting holes Door / frame separation
Part Number See table
13.1 (.52)
Single Hole Keepers
Door / frame separation
9.5 (.375)
4.5 (.18)
Ø 5.2 (.20)
Request Info
1-800-453-1692 www.aboveboardelectronics.com
97 Draw Latch
203
Over-center · Medium
• Multiple link and keeper options for application variances • Secondary locking style available
15.1(.59)
22.6 (.89)
48.4 (1.91)
ACTUAL SIZE
Ø 2.8 (.11) for seal
46 (1.81)
Ø 8.3 (.33) for padlock
1 (.042) Light duty 1.6 (.062) Heavy duty
23.8 (.95) 14.3 11.9 (.56) (.47) Lever tab up Lever tab down
Heavy-duty: Clamping force: 670 N (150 lbf)
L 38.1 (1.50)
Light-duty: Clamping force: 310 N (70 lbf)
Keepers Concealed 2 Hole
Single Hole Peg Style
Exposed Single Hole
Exposed 1 Hole 1 Lug
Installation Notes
4 (.17)
11 (.42) 19 (.75)
6.4 (.25) 24.6 (.97)
Ø 7.9 (.31)
Two Hole Keepers
Install assembly with M4 (No. 8) round head screws or 4 (.156) rivets (not supplied). Peg needs flat head.
19 (.75)
Ø 11 (.44)
1.6 (.06)
6.4 (.25)
1.6 (.06)
Accessories
7.9 (.31)
Latch Only
Ø 4.3 (.171) all mounting holes
17.5 (.687)
S
9.5 (.375)
Door / frame separation
Secondary catch provides resistance against severe vibration and accidental opening. Part number steel: 97-58-101-11 Part number stainless steel: 97-58-101-25
22.2 (.88)
Single Hole Keepers
17.5 (.687)
Latching point
17.5 (.687)
S
Door / frame separation
Stainless steel, steel, zinc plated or steel, black powder coated
Performance Details
10.7 (.42) 1.6 (.06)
Material and Finish
S
Door / frame separation
Part Number Selection S Style
Order latch and keeper separately
L Link Length
1 Lever tab up 2 Lever tab down 3 Padlockable
1 Short (light-duty) 2 Medium (light-duty) 3 Long (light-duty)
97 - 50 - S L 0 - 1 M M Material
1 Steel, zinc plated 2 Stainless steel (light-duty only) 5 Steel, black powder coated
17-7PH stainless steel
or 1075 steel with phosphate For keeper part number see table dip; both have black organic coating
Keeper Part Number Keeper Style
Stainless Steel
Steel
S Dimension Short Link L = 29.4 (1.16)
Medium Link L = 42.1 (1.66)
Long Link L = 54.8 (2.16)
Concealed 2 hole
97-57-103-11
97-57-103-24
15.9 (.63)
28.6 (1.13)
41.3 (1.63)
Single hole peg style
97-57-105-11
97-57-105-24
29.4 (1.16)
42.1 (1.66)
54.8 (2.16)
Exposed single hole
97-57-104-11
97-57-104-24
47.6 (1.88)
60.3 (2.38)
73.0 (2.88)
Exposed 1 hole 1 lug
97-57-102-11
97-57-102-24
38.1 (1.50)
50.8 (2.00)
63.5 (2.50)
31.8 (1.25)
44.5 (1.75)
57.1 (2.25)
Latch only Request Info
Secondary catch For latch part number see builder
5 Short (heavy-duty) 6 Medium (heavy-duty) 7 Long (heavy-duty)
1-800-453-1692
Dimensions in millimeters (inch) unless otherwise stated www.aboveboardelectronics.com
www.southco.com/97
97 Draw Latch
204
Over-center · Large
• Multiple keeper options for application variances
Steel, zinc plated or steel powder coated black Clamping force: 290 N (65 lbf)
Latch spring
30.2 (1.19)
Material and Finish
Performance Details
Base
Lever
19.8 (.78)
Ø 2 (.11) Hole for seal
73.2 (2.88)
Door / frame separation Ø 10.4 (.41) Hole for padlock
Installation Notes Install assembly with M5 (No. 10) round head screws (not supplied) or 5 (3/16) rivets
1.3 (.050)
28.7 (1.13)
18.3 (.72)
For peg style keeper use M5 (No. 10) flat head screws or rivets
16 (.63)
24.5 1.5 (1.00) (.06)ACTUAL SIZE
57.2 (2.25) Unlatched
50.8 (2.00)
Keepers
Single Hole Peg Style
Concealed 2 Hole
24.6 (.97) 1.5 (.06)
8.6 (.34)
24.6 (.97)
14.2 Ø (.56)
32.5 (1.28)
Exposed 1 Hole 1 Lug
29.5 (1.16) 7.9 (.31)
Ø 10.4 (.41)
1.5 (.06)
10.4 (.41)
Ø 5.2 (.203) all mounting holes
25.4 (1.00)
39.6 (1.56)
12.7 (.50)
Door / frame separation
Part Number See table Order latch and keeper separately
25.4 (1.00)
69.9 (2.75)
12.7 (.50)
Door / frame separation
Door / frame separation
Latch Only Material
Latch Part Number
Door/frame separation
Lever Tab Up
Padlockable
Steel, Zinc Plated
97-60-120-11
97-60-320-11
Steel, Black Powder Coated
97-60-120-15
97-60-320-15
Material
www.southco.com/97
57.2 (2.25)
25.4 (1.00)
Ø 5.2 (.203)
25.4 (1.00)
Latching point
60.2 (2.37)
Keeper Part Number Concealed 2 Hole
Single Hole Peg Style
Exposed 1 Hole 1 Lug
Steel, Zinc Plated
97-67-103-11
97-67-105-11
97-67-104-11
Steel, Black Powder Coated
97-67-103-15
97-67-105-15
97-67-104-15
Dimensions in millimeters (inch) unless otherwise stated
Request Info
1-800-453-1692 www.aboveboardelectronics.com
97 Draw Latch
205
Over-center · Extra large
• Multiple keeper options for application variances 30.5 (1.20)
39.5 (1.56)
Material and Finish Steel, zinc plated
Performance Details Clamping force: 645 N (145 lbf)
103.6 (4.08) Tab up
Installation Notes
100.4 (3.95) Tab down
For security seal Ø 4.9 (.19)
42.9 (1.69)
Install assembly with M6 (1/4) round head screws (not supplied) or 6 (1/4) rivets
For padlock Ø 14.7 (.58)
1.3 (.050)
23.6 20.2 (.93) (.80) 30.9 (1.22)
ACTUAL SIZE
19 (.75)
70.6 (2.78)
67.6 (2.66)
Keepers
Exposed Single Hole
Concealed 2 Hole 36 (1.42) 1.9 (.075)
36 (1.42)
11.1 (.44)
17.5 (.687) 48 30.9 (1.22) (1.89) Door/frame separation
Material Steel
Material Steel
1.9 (.075)
38.9 (1.53)
44 (1.73) 12.7 (.50)
Latch Only
Ø 6.5 (.257) all mounting holes 30.9 (1.22)
105.6 (4.16)
Ø 6.5 (.257)
Latching point
76.2 (3.00)
30.9 (1.22)
Door/frame separation
Door/frame separation
Part Number
Latch Part Number Lever Tab Up
Lever Tab Down
Padlockable
See table
97-70-120-11
97-70-220-11
97-70-320-11
Order latch and keeper separately
Keeper Part Number Concealed 2 Hole
Exposed Single Hole
97-77-103-11
97-77-104-11
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com/97
14.5 (.57)
Short Blade
V2 Draw Latch
206
16 (.63)
13 38 (1.50) (.50) 82 (3.22)
Over-center · Small
• Torsion spring to accommodate application Short Blade variances
14.5 (.57)
48 (1.88)
Material and Finish Stainless steel or steel, zinc plated
19.5 14.5 (.77) (.57)
Short Blade Long 35 Blade16 (1.375) (.63) 13 38 (1.50) (.50) 82 (3.22)
1612.7 16(.63) (.50) 13 (.63) 64 (2.50) 13 (.50) 38 (1.50) (.50) 107 (4.22) 82 (3.22) 5.5 (.218) 2 places
Performance Details Steel Clamping force: 330 N (75 lbf) Min. 700 NShort (160 lbf) Max.
ACTUAL SIZE Long Blade
Short Blade 19.5 14.5 (.77) (.57)
Blade Long
Stainless BladeSteel Clamping force: 260 N (60 lbf) Min. 530 N (120 lbf) Max.
Notes
15 19.5 (.59) (.77)
Wire Sealing Long 16 16 Blade (.63) 13 (.63) 64 (2.50) 13 (.50) 38 (1.50) (.50) 107 (4.22) 82 (3.22)
Wire Sealing
Spring loaded anchor plate compensates up to 2.3 (0.09) for irregularities in sealing and Wireset gasket
Padlockable
15 (.59) 19.5 (.77)
Padlockable Wire 16 25 Sealing (.63) (1.00) 16 38 (1.50) (.63) 13 64 (2.50) (.50) 82 (3.22) 107 (4.22)
Padlockable Wire Sealing
Long Blade S
Ø 5.5 (.218) 2 Holes
25 25 16 16 (1.00)(1.00) (.63) (.63) 38 (1.50) 38 (1.50) 82 (3.22) 82 (3.22)
OrderPadlockable latch and keeper separately
2 Holes (see keeper table)
22 17Description (.88) (.65)
Latch
Keeper
6 24 (.25) 22 (.95) (.88)17 (.65)
Padlockable 16 16 2525 Door / frame (.63) (.63) (1.00) (1.00) separation 38 (1.50) 38 (1.50) 82 (3.22) 82 (3.22) 35 (1.375)
Ø 9.5 (.38) 24 (.95)
Style
Long Blade
Ø 9.5 (.38)
Keeper
Ø 2.4 (.09) Ø 9.5 (.38) 22 15 (.88) (.59)
Ø 2.4 (.09)
22 15 (.88) (.59)
14 (.562)
Long Blade See table
16 25 (1.00)16 (.63) 38 (1.50) (.63) 13 64 (2.50) (.50) 82 (3.22) 107 (4.22)
Ø 2.4 (.09)
Sealing Long Blade
Part Number
Ø 2.4 (.09)
25 (1.00)
Ø 9.5 (.38) 2 (.08)
25 (1.00) 15.5 (.607)
16 Mounting (.63) 16 13 hole 79 (3.12) (.63) (.50) 38 (1.50) 11 (.42) 82 (3.22)
S Dimension Min.
24 (.95)
Steel
Stainless Steel V2-0025-52
57.3 (2.26)
V2-0025-07 16 V2-0068-07 (.63) 13 V2-0034-07 (.50)
57.3 (2.26)
V2-0026-07
V2-0026-52
3.4 (.135) mounting holes
V2-0018-07
V2-0018-52
5.5 (.218) mounting holes
V2-0054-07
V2-0054-52
16 Short blade 55 (2.17) (.63) 16 25 13blade Long 80.7 (3.17) 79 (3.12) (.63) (1.00) (.50) 38 (1.50) Wire sealing 55 (2.17) 82 (3.22) Padlockable 55 (2.17)
24 in millimeters (inch) unless otherwise stated 17 www.southco.com/V2 (.95) Dimensions Long Blade (.65) 16 (.63)
17 Max. (.65) 57.3 (2.26)
Part Number
Request Info
83 (3.26)
~ 79 (3.12) V2-0034-52
1-800-453-1692 www.aboveboardelectronics.com
V4 Draw Latch
207
Over-center · Large 4.6 (.18)
47.5 (1.87)
• Torsion spring to accommodate application variances
22.1 (.87)
Material and Finish
21.3 (.84)
6.6 (.26)
Stainless steel or steel, zinc plated
Performance Details
12.7 (.50)
Travel
ACTUAL SIZE 47.5 (1.87)
Stainless Steel Average ultimate load: 3800 N (850 lbf)
86.5 (3.40) Not extended
20.6 (.81)
Notes Spring loaded anchor plate compensates up to 2.3 (0.09) for irregularities in sealing and gasket set
9.1 (.36) 49 (1.93)
19.8 (.78)
52.3 (2.06)
Fixed Installation
Adjustable Installation 38.1 (1.50)
Door / frame separation
Steel Average ultimate load: 3500 N (786 lbf)
38.1 (1.50)
Ø 4.3 (.169) Min. 68 (2.68) Max. 71 (2.78)
A 12 3
Ø 4.3 (.169)
Door / frame separation
12 3 30.1 (1.18) Position 1
Position Number
Position 3
Position 2
Dimensions A Min.
Description
Max.
Part Number Steel
Stainless Steel
1
71.4 (2.81)
73.7 (2.90)
Latch
V4-0006-02
V4-0006-52
2
69.9 (2.75)
72.1 (2.84)
Keeper
V4-0009-02
V4-0009-52
3
68 (2.68)
70.6 (2.78) Request Info
1-800-453-1692 www.aboveboardelectronics.com
Dimensions in millimeters (inch) unless otherwise stated
Part Number See table Order latch and keeper separately
www.southco.com/V4
TL Draw Latch
208
Over-center · Small · Wire bail
• Compact latch • Multiple link options for application variances Material and Finish
15 (.59)
Ø 2.0 .12˝ (.08)
22.0 (.87)
15.59˝ (.59)
Steel working load: Compact heavy-duty: 1290 N (290 lbf) Compact: 220 N (45 lbf)
L Link Flat Wire Link
Stainless steel working load: Compact heavy-duty: 800 N (180 lbf) Compact: 220 N (45 lbf)
Installation Notes Install assembly with M4 (No. 6) round head screws (not supplied) or 4 (.156) rivets
Notes Order keepers separately, see page 210
13.0 (.51) 10.0 (.394) 22.0 (.87)
15.2 28.0 35.6 (.60) (1.1) (1.4) Ø 4.2 (.167)
Ø 2.0 (.08)
15.2 (.60)
22.0 (.87)
B Base
Ø.167˝ Rivet Hole
15.2 (.60)
ACTUAL13.5 SIZE (.53)
34.0 (1.34)
Flat Wire Link
30.0 (1.18) .51˝ .394˝
L Link .87˝ .08˝ 36.0 (1.42)
Short Curved Wire Link
.69˝ .59˝
.08˝
.87˝
1.26˝
.59˝ .59˝
Long Curved Wire Link
Ø 4.2 (.167)
30.0 (1.18)
Ø 2.0 (.08)
13.5 (.53)
25.2 (.99) 36.0 (1.42) .59˝
Ø 4.2 (.167)
13.0 (.51) 10.0 (.394)
15.2 28.0 35.6 ACTUAL 30.0 (1.18)SIZE (.60) (1.1) (1.4)
Ø 2.0 Ø3(.08) (.118)
22.0 (.87) Heavy-Duty
Concealed Mounting Holes
Ø 4.2 (.167) .59˝ 1.10˝
.95˝
Stainless steel, steel, zinc plated or steel, black E-coat
Performance Details
Ø.167˝ Rivet Holes
Exposed Mounting Holes .40˝
.60˝ 1.1˝ 1.4˝
.87˝ .08˝
B Base
Ø.167˝ Rivet hole 13.5 (.53) .59˝
34.0 (1.34) .69˝
ø.167˝ RIVET HOLE
Short Curved Wire Link
.51˝ .87˝
.60˝ 1.1˝ 1.4˝Hole Ø.167˝ Rivet 21.6 (.85) Ø.167˝ Rivet Hole
.87˝
.08˝
.60˝ 1.1˝ 1.4˝
.87˝
.08˝ A
.60˝ 1.1˝ 1.4˝
Ø.167˝ Rivet Hole
.394˝
.59˝
.08˝
19.5 (.77) 1.26˝
Long Curved Wire Link .51˝ .394˝ .51˝ .394˝ .87˝ .87˝
A36.0 (1.42)
.08˝ .08˝ 34.0 (1.34)
Ø.167˝ Rivet Hole Ø.167˝ Rivet Hole .59˝ .59˝
A
A Shallow Hook Link
Shallow Hook Link 36.5 (1.44) 36.5 (1.44)
34.5 (1.36) 34.5 (1.36)
Deep Hook Link
Deep Hook Link
37.8 (1.49) 37.8 (1.49)
40.0 (1.57)
Part Number Selection Latch only See page 210 for keepers
www.southco.com/TL
40.0 (1.57)
L Link style 1 Flat 2 Short curved 3 Long curved 4 Shallow hook 5 Deep hook 6 Heavy-duty (Steel & 300 stainless steel model only)
TL - 20 - B 0 L - F
Dimensions in millimeters (inch) unless otherwise stated
B Base type 1 Exposed 2 Concealed Request Info
F Finish 07 Steel, zinc plated 13 Black E-coat 24 316 stainless steel electropolished 52 300 stainless steel passivated
1-800-453-1692 www.aboveboardelectronics.com
TL Draw Latch
209
Over-center · Medium · Wire bail
Exposed Mounting Holes
8.0 (.32) Ø 2.0 22.0 8.0 (.32) (.08) (.87) 8.0 (.32) Ø 2.0 22.0 (.08) (.87) Ø 2.0 22.0 (.08) (.87)
35.0 (1.38) 22.0 (.87) 35.0 (1.38) 22.0 35.0 (1.38) (.87) 22.0 (.87)
Concealed Mounting Holes Ø 4.2 (.167) Ø 4.2 (.167) 15.2 22.0 30.5 (.60) (.87) (1.2) Ø 4.2 (.167) 15.2 22.0 ACTUAL (.60) SIZE(.87) 15.2 22.0 (.60) (.87)
22.0 (.87)
30.5 (1.2) 30.5 (1.2)
Ø 2.0 (.08)
22.0 (.87)
19.98 (.79)
19.90 (.787)
19.98 (.79)
19.90 (.787)
Ø 2.0 (.08)
60.0 (2.4)
60.0 (2.4)
Flat Wire Link
Flat Wire Link
15.0 (.59)
60.0 (2.4) 60.0 (2.4) 22.0 (.87)
35.0 (1.37)
.32˝ L Link L Link .08˝ .87˝ .87˝
.08˝ A
.866˝ 22.0 (.87)
22.0 (.87)
T Lever Base B Rivet Hole T Lever
B Base .60˝ .866˝ 1.2˝ B Base
Shallow Hook Link
35.0 (1.37) .79˝
.787˝
.87˝
.79˝ .08˝35.0 (1.37)
.787˝
.87˝
.08˝
Curved Wire Link
.60˝ .866˝ 1.2˝
22.0 (.87)
A
T Lever
Ø.167˝ Rivet Ø.167˝Hole
15.2 (.60) 13.7 (.54) ACTUAL SIZE
Ø.167˝ Rivet Hole Ø.167˝ Rivet Hole .60˝ .60˝
A
.67˝ 35.0 (1.37) A .67˝
Material and Finish Stainless steel or steel, zinc plated or steel, black E-coat
Performance Details Steel: Working load: 220 N (45 lbf) Stainless Steel: Working load: 220 N (45 lbf)
Installation Notes Install assembly with M4 (No. 6) round head screws (not supplied) or 4 (.156) rivets
Notes Order keepers separately, see page 210
Shallow Hook Link
23.0 (.89)
35.6 (1.40)
23.0 (.89)
Deep Hook Link
35.6 (1.40)
Deep Hook Link
26.0 (1.03)
39.1 (1.54)
26.0 (1.03)
L Link style 1 Flat 3 Short curved 4 Shallow hook 5 Deep hook
15.2 (.60) Ø 4.2 (.167)
13.7 (.54)
15.0 (.59) 15.0 (.59)
22.0 (.87) L Link 1.38˝ (.87) .32˝ 22.0 .866˝ Curved Wire Link 1.38˝
60.0 (2.4)
Ø 4.2 (.167)
• Multiple link options for application variances • Secondary locking style available
39.1 (1.54)
TL - 40 - B T L - F
Part Number Selection
F Finish 07 Steel, zinc plated 13 Black E-coat 24 316 Stainless steel electropolished 52 300 Stainless steel passivated
Latch only See page 210 for keepers
T Lever type 0 Standard 1 Secondary catch (Steel & 300 Stainless steel model only) (Exposed base only) 2 Padlockable (Steel model only) (Concealed base only)
B Base type 1 Exposed 2 Concealed
Request Info
Dimensions in millimeters 1-800-453-1692 (inch) unless otherwise stated www.aboveboardelectronics.com
www.southco.com/TL
TL Keeper
210
Keeper
4.0 (.16)
• Multiple keeper options Small for application variances • Suitable for all TL-20 and TL-40 latches
Installation Notes Install assembly with M4 (No. 6) round head screws (not supplied) or 4 (.156) rivets
Exposed
Latch
Keeper Centerline of front rivet hole
Latch
Keeper Centerline of front rivet hole
S
Large
13.7 (.54)
Right Angle
3.8 (.15)
30.0 22.0 (1.18) (.866)
30.0 22.0 (1.18) (.866) Ø 4.2 (.167)
5.0 (.20)
3. Where the column and row meet use the figure for your install S dimension
15.0 (.59) 13.3 (.53)
5.3 (.21) ACTUAL SIZE 5.9 (.23)
1.6 (.06)
ACTUAL SIZE
Medium
44.0 (1.72) 8.0 (.31)
28.5 (1.12)
Contact Southco for assistance in determining the "S" dimension.
15.0 (.59) Ø 4.2 (.167)
ACTUAL SIZE
1.6 (.06)
9.0(.35) 13.0 (.512)
B Base type 1 Small 2 Narrow 3 Right angle 5 Large 9 Medium
TL - 17 - 20 B - F
F Finish 07 Steel, zinc plated 13 Black E-coat 24 316 stainless steel electropolished 52 300 stainless steel passivated
Small
Narrow
Large
Medium
TL-17-201-F
TL-17-202-F
TL-17-205-F
TL-17-209-F
TL-20-101
44.7 (1.76)
46.7 (1.84)
62.0 (2.44)
49.0 (1.93)
TL-20-102
30.3 (1.19)
32.3 (1.27)
47.6 (1.87)
34.6 (1.36)
Keeper Style Draw Latch
www.southco.com/TL
28.6 (1.13) 3.9 (.394)
Ø 4.2 (.167)
Part Number Selection
2. Select your keeper style in the keeper style row
ACTUAL SIZE
26.7 (1.05)
Centerline of front mounting hole
1. Select your latch choice in the draw latch column
10 (0.39)
1.6 (.06)
SIZE
1.6 (.06)
Centerline of front mounting hole
Concealed
5.0 (.20) Ø 4.2 (.167) ACTUAL
1.6 (.06) S
15.0 (.59)
30.0 22.0 (1.18) (.866)
Material and Finish Stainless steel, steel, zinc plated or steel, black E-coat
Ø 4.2 (.167)
Narrow
S Dimension
TL-20-103
44.7 (1.76)
46.7 (1.84)
62.0 (2.44)
49.0 (1.93)
TL-20-106
33.9 (1.33)
35.9 (1.41)
51.2 (2.02)
38.2 (1.50)
TL-20-201
41.7 (1.64)
43.7 (1.72)
59.0 (2.32)
46.0 (1.81)
TL-20-202
28.2 (1.11)
30.2 (1.19)
45.5 (1.79)
32.5 (1.28)
TL-20-203
41.7 (1.64)
43.7 (1.72)
59.0 (2.32)
46.0 (1.81)
TL-40-101
30.7 (1.21)
32.7 (1.29)
48.0 (1.89)
35.0 (1.38)
TL-40-103
30.7 (1.21)
32.7 (1.29)
48.0 (1.89)
35.0 (1.38)
TL-40-201
43.7 (1.72)
45.7 (1.80)
61.0 (2.40)
48.0 (1.89)
TL-40-203
43.7 (1.72)
45.7 (1.80)
61.0 (2.40)
48.0 (1.89)
Dimensions in millimeters (inch) unless otherwise stated
Request Info
1-800-453-1692 www.aboveboardelectronics.com
TL Draw Latch
211
Over-center · Large · Wire bail
18.0 (.709)
103.5 (4.08)
Ø 5.2 (.204)
Ø 3.5 (.138)
32.0 (1.26)
33.4 (1.315)
Material and Finish
14.0 24.0 (.551) (.94)
35 (1.38)
22.0 (.87)
• Robust construction
5.3 (.21)
Stainless steel or steel, zinc plated
Performance Details
Ø 5.2 (.204)
Working load: 2490 N (560 lbf)
50 (1.97)
Installation Notes
4.6 (.18) 15.7(.62)
ACTUAL SIZE
7.6 (.30)
Install assembly with M5 (No. 10) round head screws (not supplied) or 5 (.196) rivets.
2.0 (.079) Ø 8.0 (.315)
Door
Frame
Part Number See table Order latch and keeper separately
Part Number
Description
Steel
Stainless Steel
Latch
TL-50-201-07
TL-50-201-52
Keeper
TL-17-501-07
TL-17-501-52
Other options available. For complete details on variety, part numbers, installation and specification, go to
www.southco.com/TL
TL Draw Latch Over-center · Heavy-duty · Wire bail
Ø 5.36 (.211) 20 Rivet Holes (.787)
40.0 (1.575)
25.0 (.984)
30.0 (1.181)
• Robust construction
Ø 5.36 (.211) Rivet Holes
Material and Finish
29.0 45.0 60.0 (1.14) (1.77) (2.36)
30.5 (1.2) 15.0 (.590)
35.0 (1.38) 7.5 (.30)
17.5 (.69)
Performance Details Working load: 2670 N (600 lbf)
125.0 (4.92)
40 (1.57)
Installation Notes Ø 10.7 (.42)
Install assembly with M5 (No. 10) round head screws (not supplied) or 5 (.196) rivets
22.0 (.87)
15.0 (.59) 2.0 (.079)
Steel, zinc plated
Frame
Door
Part Number
ACTUAL SIZE
Request Info
See table
Description
Part Number
Draw Latch
TL-60-102-07
Keeper
TL-17-601-07
1-800-453-1692
Dimensions in millimeters (inch) unless otherwise stated www.aboveboardelectronics.com
Order latch and keeper separately Other options available. For complete details on variety, part numbers, installation and specification, go to
www.southco.com/TL
A1 Draw Latch
212
Over-center · Heavy-duty · Small and medium · Adjustable
• Hooked latching rod • Latching arm adjusts to fit your grip range
Small
Ø 5.3±0.1 (.209±.005) Latch assembly M5 thread 68 (2.66)
Stainless steel or steel, zinc plated Grip: Vinyl yellow
21 (.82)
Hook may be used sideways 25.5±0.1 (1.00±005)
Either inside or end of hook may be used for latching. In either case, 1.5 (.06) Thick yellow vinyl grip contact point must be no higher than 4.4 Housing Lever (.17) 3 (.13) above mounting surface
Performance Details
Latched at center of radius: Small: Max. static load: 1350 N (300 lbf) Medium: Max. static load: 3110 N (700 lbf)
Latching rod
27 (1.06)
Material and Finish
Latched at end of hook: Small: Max. static load: 1200 N (270 lbf) Medium: Max. static load: 1780 N (400 lbf)
Jam nut
Rod guide
20 (.78)
Hook into a cover
17 (.67) 6 (.24) 39 (1.5) Min. to 59 (2.3) Max.
1.6 (.060)
Ø 19 (0.75) Min. Hole.
Lever
Ø 6.5 (.25) Max.(small) Ø 9.5 (.38) Max.(medium)
Jam nut
Latching rod
Latching rod Lever
Hook around a pin
Housing
Installation Notes Small: Install assembly with four M5 (No. 10) screws or rivets Medium: Install assembly with four M6 (1/4) screws or rivets
Ø 6.5±0.1 (.257±.005)
ACTUAL SIZE
Medium Rod guide
44.5±0.2 (1.75±.010)
Jam nut Latching rod
40 (1.56) Latch assembly 5/16-18 UNC thread
31 (1.21)
113 (4.45) 1.5 (.06) Thick yellow vinyl grip Lever
Housing
7 (.27)
Hook may be used sideways Either inside or end of hook may be used for latching. In either case, contact point must be no higher than 11 (.44) above mounting surface
32 (1.25)
Hook onto a lid
25 (1.00) 9 (.36) 79 (3.13) Min to 113 (4.44) Max
1.9 (.075)
ACTUAL SIZE
Part Number Selection B Base type 5 Small 7 Medium
www.southco.com/A1
A1 - 11 - B 02 - M
Dimensions in millimeters (inch) unless otherwise stated
Request Info
M Finish 10 Steel, zinc plated without yellow grip 20 Steel, zinc plated with yellow grip 40 Stainless steel without yellow grip 50 Stainless steel with yellow grip 1-800-453-1692 www.aboveboardelectronics.com
A1 Draw Latch
213
Over-center · Small and medium · Adjustable
Small 4.4 (.17)
Jam nut
Rod guide
• Adjustable grip
Keeper Style A 13 8 (.31) (.50)
27 (1.06)
Keeper Style B 5 (.19)
22 (.88)
22 (.88)
1.3 (.050)
Small Panel Preparation
ACTUAL SIZE
6.4±0.2 (.250±.005)
+.010 Ø5.2 +0.2 -0.0 (.203 -.000 )
25.5 (1.00
Small (keeper style B): Max. static load: 1550 N (350 lbf) Medium (keeper style A) Max. static load: 890 N (200 lbf)
Medium Panel Preparation
Door / frame separation
+0.1 -0.2 +.005 -.010
Small (keeper style A): Max. static load: 180 N (40 lbf)
2 Mounting holes tapped M5 x 0.8 by 7 (.28) deep. Mounting screws not supplied
11 (.44) 1.6 (.060)
Performance Details
12 (.47)
Separation latching rod
20 (.78)
5 (.19)
13 (.50)
14 (.56) Ø 5.2 (.203) Door/frame separation
Stainless steel or steel, zinc plated Grip: Vinyl yellow
13(.50)
5 (.19)
Latch assembly 21 M5 thread (.82) 68 (2.66) 1.5 (.06) Thick yellow vinyl grip Housing Lever
Material and Finish
+.010 Ø 6.7 +0.2 -0.0 (.257 -.000 )
+0.1
44.5 -0.2 (1.75 +.005 ) -.010
) Keeper A 25 (1.00) Min. to 44 (1.75) Max. Keeper B 29 (1.13) Min. to 48 (1.88) Max.
Medium
Jam nut
Rod guide
9.5±0.2 (.375±.005)
Door / frame separation
12.7±0.2 (.500±.005)
Keeper style A 11 (.44)
7 (.27)
40 (1.56)
Small: Install assembly with four M5 (No. 10) round head screws or rivets Medium: Install assembly with four M6 (1/4) round head screws or rivets
19 (.75) Latching rod
6 (.25) 31 (1.21)
19 (.75) Ø 6.7 (.265)
Keeper
Door/frame separation
Lever Jam nut Latching rod
1.5 (.06) Thick yellow vinyl grip Lever
19±0.2 (.750±.005)
24 (.94) Min. to 57 (2.25) Max.
31 (1.21) Latch assembly 5/16-18 UNC thread 113 (4.45)
Installation Notes
Housing Latching rod
ACTUAL SIZE
32 (1.25)
1.9 (.075)
19 (.75)
1.5 (.060)
Part Number Selection Assembly complete with keeper
A1 - 10 - B 0 K - M B Base type 5 Small 7 Medium
K Keeper style 1 Type A 3 Type B (Small steel, zinc plated models only) Request Info
M Finish 10 Steel, zinc plated without yellow grip 20 Steel, zinc plated with yellow grip 40 Stainless steel without yellow grip 50 Stainless steel with yellow grip
Dimensions in millimeters (inch) unless otherwise stated 1-800-453-1692 www.aboveboardelectronics.com
www.southco.com/A1
A1 Draw Latch
214
Over-center · Heavy-duty · Adjustable
• Robust construction • Adjustable grip Material and Finish
Latching rod
45 (1.78)
Steel, zinc plated or black powder coated
7/16-14 unc thread 203 (8.00)
Performance Details
Door / frame separation Lever
Yellow or black vinyl grip
Latched at end of hook: Max. static load: 2225 N (500 lbf) Latched at center of radius: Max. static load: 4450 N (1000 lbf)
47 (1.84)
Rod guide
Housing
Ø 10 (.386)
46 (1.81)
38 (1.50)
8.3 (0.33) hole for padlock Ø 16 (0.63) Max. for engagement
Installation Notes Install assembly with two M8 (5/16) bolts (not supplied)
66.5 +.02 -.01 (2.625±.010)
+.010 Ø 8.4 +0.1 -0.0 (.323 -.000 ) (2 Holes)
16 (.61)
G Grip range (see table)
Hook may be used sideways. Either inside or end of hook may be used for latching. In either case, contact point must be no higher than 25 (1.00) above mounting surface
Lever Latching rod
Jam nut
ACTUAL SIZE
Part Number See table
www.southco.com/A1
G Grip Range
Part Number
Min.
Max.
Bright latch with yellow vinyl grip
Black latch with black vinyl grip
89 (3.50)
114 (4.50)
A1-11-902-20
A1-11-902-31
Dimensions in millimeters (inch) unless otherwise stated
Request Info
1-800-453-1692 www.aboveboardelectronics.com
07 Draw Latch
215
Over-center · Living hinge
Standard Style
Keeper 9.5 (.38)
Latched
20.2 (.80)
ACTUAL SIZE
19 (.750)
54.8 (2.16) 34.6 (1.36)
Unlatched
4 Holes Ø 3.30 (.130)
4.8 (.187)
Latch 30.5 (1.20)
28.4 (1.12)
7.9 (.31)
• Low profile one piece molded latch • Concealed mounting • Secondary catch option to prevent accidental opening Material and Finish Polypropylene black or white Secondary catch: acetal black or red
Performance Details Max. working load: Standard: 445 N (100 lbf)
Secondary Catch Style
Secondary catch: 310 N (70 lbf) Keeper Latched
20.3 (.80)
ACTUAL SIZE
9.5 (.375) 19 (.750)
55 (2.16) 34.5 Optional secondary (1.36) catch (Push down to release)
Secondary catch
Unlatched
4.7 (.185)
Operating temperature range: 0ºC (32ºF) to 65ºC (150ºF) Flammability rating: UL94-HB
Installation Notes Install assembly with four Ø 3 (.125) flat head rivets or M3 (No. 4) flat head screws (not supplied)
Latch
25.4 (1.00)
28.2 (1.11)
8 (.31) 11 (.43)
Ø 3.25 (.128)
19±0.4 (.750±.015) 9.5±0.8 (.38±.03)
9.5±0.1 (.375±.005)
Part Number Selection B Base type 2 Standard 5 Secondary catch
07 - 10 - B 01 - F Request Info
F Finish 11 White (standard only) 12 Black (standard only) 70 Black with red secondary catch 72 Black with black secondary catch
Dimensions in millimeters (inch) unless otherwise stated 1-800-453-1692 www.aboveboardelectronics.com
Assembly complete with keeper
www.southco.com/07
E8 Draw Latch
216
Over-center · Adjustable
• Adjustable grip • Concealed mounting Material and Finish
25.4 (1.00) Min. wall clearance to allow proper latching and unlatching 37 (1.46)
Keeper
Acetal black and glass reinforced nylon, black Adjusting nut: Stainless steel
18 (.71)
Performance Details
Cover
Max. working load: 1560 N (350 lbf) Operating temperature range: -29ºC (-20ºF) to 80ºC (176ºF)
2.5 (.10) Base
95 (3.74)
Flammability rating: UL94-HB
Installation Notes
Adjusting nut
Install assembly with five Ø 5 (.197) rivets or M5 (No. 10) screws (not supplied)
Clevis
To adjust latching force, thread adjustment nut up or down clevis (total 7.9 (.31) range)
17 (.67) 9.5±0.1 (.375±.005) Ø 5.2 (.205) Door / frame separation
5 places 6.4 (.25) Min.
ACTUAL SIZE
20.6±4 (.81±.16)
6.4 (.25) Min.
23.8±0.2 (.937±.010)
19±0.1 (.750±.005)
Part Number See table Assembly complete with keeper
www.southco.com/E8
Part Number E8-10-502-20
Dimensions in millimeters (inch) unless otherwise stated
Request Info
1-800-453-1692 www.aboveboardelectronics.com
91 Draw Latch
217
Under-center · Small · Adjustable
• Adjustable grip • Secondary catch option to prevent accidental opening
Latch Standard
Secondary Catch Ø 2.6 (.102) Rivet holes
Ø 2.6 (.102) Rivet holes
S
S 23.6 10.1 (.93) (.398)
23.6 10.1 (.93) (.398)
10.1 (.398)
10.1 (.398)
Stainless steel or steel, zinc plated 57.7 (2.27)
57.7 (2.27)
Performance Details Max. working load Stainless steel: 710 N (160 lbf)
17 (.67)
15.8 (.62)
Latch shown with 91-634-XX keeper
Latch shown with 91-630-XX keeper
Material and Finish
Steel, zinc plated: 1200 N (270 lbf)
Installation Notes
Keeper
Ø 2.5 (No. 3) screws (not supplied)
Exposed
Concealed 12.7 (.50)
10.1 (.399) 6.6 (.26)
Ø 2.6 (.102) Rivet holes
9.0 (.35)
10.1 (.399)
2.0 (.079)
Ø 2.6 (.102) Rivet holes
15.0 (.59)
6.6 (.26)
2.0 (.079)
9º
9º 16.0 (.63)
16.0 (.63)
ACTUAL SIZE
ACTUAL SIZE Case/lid separation
10.1±0.1 (.398±.004)
10.1±0.1 (.398±.004) Ø 2.6 +0.1 -0.0 (.102 +.004 -0.0 ) S
Part Number
Latch Part Number
Material
Standard
Secondary Catch
Steel
91-351-07
91-361-07
Stainless Steel
91-351-52
91-361-52
S
Keeper Type
39 - 47 (1.53 - 1.85) 52 - 60 (2.04 - 2.36)
Steel
Stainless Steel
Concealed
91-634-07
91-634-52
Exposed
91-630-07
91-630-52
Request Info
1-800-453-1692
Dimensions in millimeters (inch) unless otherwise stated www.aboveboardelectronics.com
See table Order latch and keeper separately
www.southco.com/91
91 Draw Latch
218
Under-center · Medium · Adjustable
• Adjustable grip • Kick out feature disengages from keeper • Secondary catch option to prevent accidental opening
Latch Exposed Base (Secondary catch option shown)
27.5 (1.07)
Material and Finish
80 (3.13) Base exposed
Stainless steel or steel, zinc plated
Performance Details ACTUAL SIZE
Max. working load: With 91-600 keeper: 1325 N (300 lbf)
Pin Link
74 (2.90) Max.
With K4-2338 keeper: 1550 N (350 lbf)
Handle M5 thd
Base (exposed shown)
Installation Notes M4 (No. 8) screws (not supplied)
Optional secondary catch Adjusting nut Hook 22.5 (.89)
Keeper 27 (1.06) Min. 51 (2.00) max. concealed base 56 (2.20) Min. 80 (3.15) max. exposed base
8 (.31) Pull-up
Concealed Base (Hasp option shown) Hasp shown 8 (.31) Hole 27.5 (1.07)
70 (2.74) With concealed base
ACTUAL SIZE Handle 74 (2.90) Max.
Hasp Adjusting nut
Rivet
Hook Base (concealed shown)
www.southco.com/91
Dimensions in millimeters (inch) unless otherwise stated
Keeper
Request Info
33 (1.30) (in closed position)
1-800-453-1692 www.aboveboardelectronics.com
219
Keepers Concealed
17 (.65)
Exposed
27 (1.06)
16 (.63)
29 (1.13)
12.7 (.50)
ACTUAL SIZE
ACTUAL SIZE 10 (.39)
ACTUAL SIZE
12 (.49)
6.2 (.24)
8 (.31)
ACTUAL SIZE 6.6 (.26)
6.4 (.25) 12.6 (.50)
Exposed Base and Concealed Keeper Door / frame separation
Exposed Base and Exposed Keeper
All installation holes Ø 4.4 +0.2 -0.0 (.177 ±.004)
Door / frame separation
14±0.2 (.550±.007) 10±0.2 (.39±.008) 12.7±0.2 (.500±.008)
14±0.2 (.550±.007) 7±0.2 (.275±.007) 25 (.980) Min.
59(2.32) Min. 69 (2.72) Max
62 (2.44) Min. 86 (3.39) Max.
25 (.980) Min.
Concealed Base and Exposed Keeper
Concealed Base and Concealed Keeper Door / frame separation
Door / frame separation 14±0.2 (.550±.007) Optional
10±0.2 (.39±.008)
14±0.2 (.550±.007) Optional 12.7±0.2 (.500±.008)
23.5±0.2 7±0.2 (.275±.007) (.925±.009) 6 (.24) Min.
30 (1.18) Min. 40 (1.57) Max.
7±0.2 (.275±.007)
23.5±0.2 (.93±.01)
33 (1.3) Min. 57 (2.24) Max.
6 (.24) Min.
Part Number Selection B Base type 1 Concealed 2 Concealed with secondary catch 3 Concealed with padlock hasp 5 Exposed 6 Exposed with secondary catch 7 Exposed with padlock hasp
F Finish 07 Steel, zinc plated 52 Stainless steel
91 - 5 B 2 - F Finish
Request Info
Order latch and keeper separately For latch part number see builder For keeper part number see table
Keeper Part Number Concealed
Exposed
Steel
91-600-07
K4-2338-07
Stainless Steel
91-600-52
K4-2338-52
Stainless Steel, Black
91-600-63
K4-2338-63
Dimensions in millimeters (inch) unless otherwise stated 1-800-453-1692 www.aboveboardelectronics.com
www.southco.com/91
91 Draw Latch
220
Under-center · Large · Adjustable
89 (3.51)
• Adjustable grip Material and Finish
30 (1.18) 15.9 (.625)
Stainless steel or steel, zinc plated
Performance Details
11.1 (.437)
Ø 5.1 (.200) (2 Holes)
Max. working load: 2670 N (600 lbf)
56.1 (2.21) nom. Adjusts±0.6 (.23)
M5 (No. 10) screws (not supplied)
Part Number
28.7 (1.13)
See table
ACTUAL SIZE
Ø 7.1 (.281) Hole for padlock shackle 19.0 (.75)
Assembly complete with keeper
10.2 (.40) 36.3 (1.43)
1.5 (.060)
Other options available. For complete details on variety, part numbers, installation and specification, go to
22.0 (.88)
5.1 (.20)
27.2 (1.07)
Installation Notes
www.southco.com/91
Ø 5.1 (.200) (2 Holes)
92.5 (3.64)
Door Frame
14.8 (.58) 21.0 (.83)
2.3 (.13)
Part Number
Type
Steel
Stainless Steel
Standard Latch
91-752-07
91-752-52
Latch with Padlock Hasp
91-772-07
91-772-52
91 Draw Latch Under-center · Heavy-duty · Adjustable
• Adjustable grip Material and Finish Stainless steel or steel, zinc plated
Performance Details
103 (4.06) 5.0 (.20)
30.5 15.9 (1.20) (.626)
27 (1.06)
27.0 15.9 (1.06) (.626)
22.0 (.87)
22.0 (.87)
Ø 5.2 (.205)
Max. working load: Steel: 2670 N (600 lbf) Stainless steel: 2000 N (450 lbf)
Installation Notes
7.7 (.303)
68 (2.68) Max. - 56 (2.20) min.
Ø 5.2 (.205) Rivet holes
1.6 (.062)
8.9 (.35)
16.0 (.63)
M5 (No. 10) screws (not supplied)
Part Number
Door
See table Order latch and keeper separately
Other options available. For complete details on variety, part numbers, installation and specification, go to
www.southco.com/91
Type
Keeper ACTUAL SIZE (order separately)
Frame
Part Number Steel
Stainless Steel
Latch
91-751-07
91-751-52
Keeper
91-674-07
91-674-52
Dimensions in millimeters (inch) unless otherwise stated
Request Info
1-800-453-1692 www.aboveboardelectronics.com
91 Draw Latch
221
Under-center · Heavy-duty · Adjustable
• Adjustable grip
121.0 (4.77) 6.35 (.250) 44.5 (1.75) Max.
12.7 (.500)
Ø 4.9 (.194) (3 Holes) 9.5 (.375)
6.35 (.250) 12.7 (.500)
23.8 (.938) View A-A
Stainless steel
Performance Details Max. working load: 3560 N (800 lbf)
Installation Notes
19.0 (.750) Ø 5.1±0.1 (.200±.004) (3 Holes)
Material and Finish
Install assembly with M4 (No. 10) screws (not supplied)
6.35 (.250) 107.5 (4.2
3) Optional Padlock hasp
30.5 (1.20) 25.4 Max. (1.00) Door
A
39.5 (1.56)
A
99.0 (3.90) May be adjusted to 66.0 (2.60)
24.6 (.97)
Frame
ACTUAL SIZE
Request Info
Part Number
Type
Part Number
Standard Latch
91-812-52
See table
Latch with Padlock Hasp
91-832-52
Assembly complete with keeper
1-800-453-1692
Dimensions in millimeters (inch) unless otherwise stated www.aboveboardelectronics.com
www.southco.com/91