SOLSHIELD
Datasheet
Solshield Geomembrane Liner is made of a linear low density polyethylene (LLDPE), suitable for use as a lining membrane in both horizontal & vertical applications.
TYPE A
EN 13967
Gas Protection Systems
Last Issue Date: 15.06.17
TYPE A EN 13967
SOLSHIELD Geomembrane Liner (LLDPE) SOLSHIELD - Gas Protection System
Last Issue Date 16.11.17
Description
Solshield Geomembrane Liner is made of a linear low density polyethylene (LLDPE), suitable for use as a lining membrane in both horizontal & vertical applications. Solshield Geomembrane Liner is manufactured in two basic roll widths - 5.1m and Product Description Application 8.0m. Available in thicknesses ranging from 0.75mm -2.0mm. The main purpose of the Civil engineering Solshield Geomembrane madeinofprotecting a linear low density structures• against product is to serveLiner as a is barrier engineering moisture,projects (municipal/urban structures, industrial and estates) polyethylene suitable for use as a lining membrane water, (LLDPE), liquids and chemical substances, gases (radon,inmethane andagricultural carbon dioxide). BS EN 13361: Characteristics use in the construction •reservirs & of dams Insulation various hydraulic structures, water resources both horizontal & vertical applications.required Solshieldfor Geomembrane EN 13362: Characteristics for use in 8.0m. the construction ofengineering canals (ponds, lakes, dams, canals and reservoirs) Liner isBS manufactured in two basic roll required widths - 5.1m and BSinEN 13491: Characteristics required -2.0mm. for use inThe the construction of tunnels & underground structures • Liquid and solid waste deposits/reservoirs, landfills (capping), Available thicknesses ranging from 0.75mm BS EN of 13492: Characteristics for use in the construction ofwastewater liquid wastecollectors, disposal, dewatering sites or transfer pits stations. main purpose the product is to serverequired as a barrier in protecting BS EN 13493: Characteristics required for use in the construction of solid waste storage and disposal sites engineering structures against moisture, water, liquids and chemical BS EN 15382: Characteristics required for use in the construction of transportation infrastructure Installation substances, gases (radon, methane and carbon dioxide). BS EN 13361: Characteristics required for use in the construction Application We recommend Joint welding for certain applications however the reservirs & dams membrane can be taped. Civil engineering projects (municipal/urban structures, industrial and agricultural estates) BS EN•13362: Characteristics required for use in the construction Ensure surfaces are clean and dry before applying tapes. Roll out of canals Solco 100mm x 15mt Butyldams, tape 50mm in and from reservoirs) the membrane edge. (ponds, lakes, canals • Insulation of various hydraulic structures, water resources engineering BS EN 13491: Characteristics required for use in the construction of Overlap adjoining membrane a minimum of 150mm and seal edge tunnels• &Liquid underground structures and solid waste deposits/reservoirs, landlls(capping),wastewatercollectors,dewatering with Solco 150mm x 20mt XL Reinforcement Tape. pits Characteristics required for use in the construction BS EN 13492: In complex junctions, penetrations and terminations to existing of liquidInstallation waste disposal, sites or transfer stations. BS EN 13493: structures you should also apply Solco 150mm x 20mt XL Characteristics required for use in the construction of solid waste We recommend Joint welding for certain applications however the membrane can be taped. Reinforcement Tape ensuring a minimum of 150mm lap onto the storage and disposal sites Ensure surfaces are clean and dry before applying tapes. Roll out Solco 100mm x 15mt Butyl tape 50mm in from the membrane is achieved. BS EN 15382: Characteristics required for use in the construction of
membrane edge. Overlap adjoining membrane a minimum of 150mm and seal edge with Solco 150mm x 20mt XL transportation infrastructure. Reinforcement Tape .
In complex junctions, penetrations and terminations to existing structures you should also apply Solco 150mm x 20mt XL Reinforcement Tape ensuring a minimum of 150mm lap onto the membrane is achieved.
Technical Data
Technical Data
0,75 - 10 %
Thickness 1.00 smooth (G/G) 1,0 - 10 %
1,5 - 10 %
g/cm3
939
939
939
ASTM D 6693 type IV
kN/m %
20 800
32 800
40 800
2 % Modulus (max.) Tear Resistance (min. ave.) Puncture Resistance (min. ave.) Axi-Symmetric Break Resistance Strain (min.)
ASTM D 5323 ASTM D 1004 ASTM D 4833
kN/m N N
370 70 190
420 100 350
500 150 400
ASTM D 5617
%
30
30
30
Carbon Black Content Carbon Black Dispersion Oxidative Induction Time (OIT) (min. ave.) • Standard OIT
ASTM D 1603 ASTM D 5596
% Category
ASTM D 3895
min.
100
100
100
ASTM D 5721 ASTM D 3895
%
35
35
35
m m
100 5.10 510
100 5.10 or 8.00 800 - 1600
150 5.1 or 8.00 1200
Properties Surface Thickness (min. ave.) • lowest individual of 10 values Density (max.) Tensile Properties (min. ave.) • break strength • break elongation
Oven Aging at 85 °C • Standard OIT (min. ave.) % retained after 90 days
Test method
Unit
ASTM D 5199
mm
ASTM D 1505
0.75
1.50
2-3 2-3 2-3 1 or 2, max. 1 view in category 3
STANDARD ROLL DIMENSIONS Roll Length Roll Width Roll Area
SOLCO
Datasheet
SOLSHIELD Geomembrane Liner (LLDPE)
m2
Technical Support: 0808 168 6927
Tel: 0845 450 9766
www.solco.co.uk
[email protected]
[email protected]
www.solco.co.uk
