Datasheet
SOLSHIELD SOLSHIELD Geomembrane GeomembraneLiner Liner (HDPE) (HDPE)
TTYYPPEEAA EN13967 13967 EN
Solshield Geomembrane Solshield GeomembraneLiner Linerisismade madeofofhigh-density high-density polyethylene polyethylene (HDPE), (HDPE), suitable for use as a lining membrane in both horizontal & vertical applications. suitable for use as a lining membrane in both horizontal & vertical applications. • • Complies with Complies withCE CEmarking marking(Europe), (Europe),GRI GRIGM13 GM13 (Standards recognised by the EA for the UK) (Standards recognised by the EA for the UK) • • Complies with Complies withrelevant relevantcodes codesofofpractice practicesuch suchas as current BRE and CIRIA current BRE and CIRIA • • Low Permeability Low Permeabilitytotolatent latentHydrocarbons Hydrocarbons&&Methane Methane // Radon && CO vapours Radon CO vapourstypically typicallyfound foundinincontaminated contaminated 2 2 industrial sites. industrial sites. High quality robustsingle singlelayer layerMembrane. Membrane. • • High quality robust High resistancetototearing tearing&&puncture. puncture. • • High resistance
SOLSHIELD - Gas Protection System SOLSHIELD GasProtection Protection Systems Systems SOLSHIELD - -Gas Product Description Product Description
Solshield Geomembrane Liner madeofofhigh-density high-densitypolyethylene polyethylene Solshield Geomembrane Liner is is made (HDPE), suitable for use as a lining membrane in both horizontal&& (HDPE), suitable for use as a lining membrane in both horizontal vertical applications. Solshield Geomembrane Liner is manufactured in vertical applications. Solshield Geomembrane Liner is manufactured in two basic roll widths - 5.1m and 8.0m. two basic roll widths - 5.1m and 8.0m. Available in thicknesses ranging from 0.75mm - 3.0mm. Available in thicknesses ranging from 0.75mm - 3.0mm. The main purpose of the product is to serve as a barrier protecting The main purpose of the product is to serve as a barrier protecting various engineering structures against moisture, water, liquids, chemical various engineering structures against moisture, water, liquids, chemical substances, gases (radon, methane and carbon dioxide) & root damage substances, gases (radon, methane and carbon dioxide) & root damage and control the spread of invasive plants. and control the spread of invasive plants.
Applications Applications • Reservoirs and embankments • • • • • • • • • • • • • • •
• • • • • • • • • • • • • •
Last Issue Date 16.11.17
Last LastIssue IssueDate: Date:21.10.14 21.10.14
Installation Installation
Werecommend recommend Joint Joint welding welding for We for certain certain applications applicationshowever howeverthe the membrane can be taped. membrane can be taped. Ensure surfaces are clean and dry before applying tapes. Roll out Ensure surfaces are clean and dry before applying tapes. Roll out Solco 100mm x 15mt Butyl tape 50mm in from the membrane edge. Solco 100mm x 15mt Butyl tape 50mm in from the membrane edge. Overlap adjoining membrane a minimum of 150mm and seal edge Overlap adjoining membrane a minimum of 150mm and seal edge with Solco 150mm x 20mt XL Reinforcement Tape . with Solco 150mm x 20mt XL Reinforcement Tape . In complex junctions, penetrations and terminations to existing In complexyou junctions, and 150mm terminations toXL existing structures should penetrations also apply Solco x 20mt structures you should also apply Solco 150mm x 20mt Reinforcement Tape ensuring a minimum of 150mm lap XL onto the Reinforcement Tape ensuring a minimum of 150mm lap onto the membrane is achieved. membrane is achieved.
Reservoirs embankments Japaneseand Knotweed Encapsulation (Cell Burial) Product Data Japanese Knotweed Encapsulation (Cell Burial) & land ll cells Landll capping Product Data Thickness (mm) Land ll capping & land ll cellsfor mining, power & chemical industries Standard Roll Moisture & water insulation Thickness2.0 (mm) Roll Dimensions Moisture & water insulation for mining, power & chemical industries Standard Unit 1.0 1.5 2.5 3.0 Leachate lagoons Dimensions Unit 1.0 1.5 2.0 2.5 3.0 Leachate lagoons Curtain walls Roll Length m 200 150 120 100 85 Curtain walls retention ponds Stormwater Roll Length m 200 150 120 100 85 Stormwater retention&ponds Roll Width m 5.1 / 8.0 5.1 / 8.0 5.1 / 8.0 5.1 / 8.0 5.1 / 8.0 industrial sludge basins Efuent treatment Roll Width m 5.1 / 8.0 5.1 / 8.0 5.1 / 8.0 5.1 / 8.0 5.1 / 8.0 EfTunnels uent treatment & industrial sludge basins & underground structures Roll Area 1020 765 612 510 434 m2 Tunnels underground Bund, &tank & manholestructures linings (5.1m roll) Roll Area 1020 765 612 510 434 m2 Attenuation tank wraplinings Bund, tank & manhole (5.1m roll) Roll Area 2 m 1600 1200 960 800 680 Water reservoirs Attenuation tank wrap (8.0m roll) Roll Area m2 1600 1200 960 800 680 Lake, pond & canal linings Water reservoirs (8.0m roll) Aquaculture applications Lake, pond & canal linings Contaminated land remediation for residential Aquaculture applications & commercial construction Contaminated land remediation for residential & commercial construction Typical Jointing Details for Solshield Geomembrane Liner (HDPE)
Typical Jointing Details for Solshield Geomembrane Liner (HDPE) Adjustable clip
Adjustable clip Solco Double Sided Butyl Tape 50mm x 10m Solco Double Sided Butyl Tape 50mm x 10m
Solshield Barrier Continuous fully sealed membrane Solshield Barrier
Continuous fully Double sealedSolco membrane Sided Butyl Tape 100mm Solco Doublex 15m Sided Butyl Tape 100mm x 15m
rlap
Ove
mm 150
min
min Typical Lap 0mm 5Detail ap 1 rl
Ove
Typical Lap Detail
Top hat pipe seal around vent stack
Top hat pipe seal around vent stack
Solshield Barrier Continuous fully sealed membrane Solshield Barrier Continuous fully sealed membrane
Typical Penetration Detail
Typical Penetration Detail
Solshield Barrier Continuous fully sealed membrane Solshield Barrier Continuous fully sealed membrane
150mm
150mm
Solsheet Self Adhesive Gas Membrane Solsheet Self Adhesive Gas Membrane
150mm
150mm Typical Column Detail
Typical Column Detail
www.solco.co.uk
[email protected] Technical Support: 0808 168 6927 Tel: 0845 9766 www.solco.co.uk www.solco.co.uk
[email protected] Technical Support: 0808450 168 6927
[email protected]
Datasheet Datasheet
Technical Data Properties
Test Method
Unit
0.75
1.0
Surface
Thickness (mm) 1.5 2.0
2.5
3.0
G/G (smooth/smooth)
Thickness (min. ave.) • lowest individual of 10 values
ASTM D 5199
mm
0.75 - 10 %
1.0 - 10 %
1.5 - 10 %
2.0 - 10 %
2.5 - 10 %
3.0 - 10 %
Density (min.)
ASTM D 1505
g/cm3
0.940
0.940
0.940
0.940
0.940
0.940
Tensile Properties (min. ave.) • yield strength • break strength • yield elongation • break elongation
ASTM D 6693 typ IV
kN/m kN/m % %
12 24 12 750
17 30 12 750
25 45 12 750
33 58 12 750
42 75 12 750
48 85 12 750
Tear Resistance (min. ave.)
ASTM D 1004
N
100
130
190
280
340
380
Puncture Resistance (min. ave.)
ASTM D 4833
N
250
350
550
700
850
1000
Stress Crack Resistance
ASTM D 5397
hr.
500
500
500
500
500
500
Carbon Black Content
ASTM D 4218 ASTM D 6370
%
2-3
2-3
2-3
2-3
2-3
2-3
Carbon Black Dispersion
ASTM D 5596
Category
Oxidative Induction Time (OIT) (min. ave.) • Standard OIT
ASTM D 3895
min.
100
100
100
100
100
100
Oven Aging at 85 °C • Standard OIT (min. ave.) % retained after 90 days
ASTM D 5721 ASTM D 3895
%
55
55
55
55
55
55
min. 9 in Categories 1 or 2 and max. 1 in Category 3
BS EN 13361: Characteristics required for use in the construction reservirs & dams BS EN 13362: Characteristics required for use in the construction of canals BS EN 13492: Characteristics required for use in the construction of liquid waste disposal, sites or transfer stations. BS EN 13493: Characteristics required for use in the construction of solid waste storage and disposal sites BS EN 15382: Characteristics required for use in the construction of transportation infrastructure
Storage & Handling on site SOLSHIELD Geomembrane Liner (HDPE) does not contain any hazardous substances (according to REACH No. 1907/2006). The product is chemically inert and any acids or alkalis present in the subsoil will not affect the membrane. It is not recommended for use when exposed to sunlight and general outdoor weather conditions for long periods of time. Weathering will not occur when installed. Rolls should be stored undercover. Quality control during the laying of the membrane is extremely important, the membrane should be protected either through the use of temporary protection over its whole area or the immediate laying of a covering layer.
Gas System Accessories
SOLCO
Product
Description
Sizes
Application
Supply
Solco Foil Backed Jointing Tape
Single sided tape for securing laps & joints
75mm x 50m
Securing Laps & Joints
Rolls
Solco Double sided Butyl Jointing Tape
Butyl Adhesive Tape
50mm x 10m 100mm x 15m
Butyl based double sided tape for joints and laps
Rolls
Solco Top Hat Units
Polymeric
For sealing around penetrations through gas membrane
Each
Solcourse Gas Resistant DPC
A exible polyethylene DPC with an aluminium foil
300mm - 1000mm
Solco Gas Sump Units
Part of the Radon Protection System
430 x 430 x 220mm
Solco XL Jointing Tape
Reinforcing Tape
Solco Primer
Primer for SA Membrane
Various
100, 150 & 300mm wide 5L & 25L
To prevent the transmission of Radon, CO2 & Methane Gas Radon Sumps are used in full protection areas, where sub oor depressurisation may be required. overband tape self-adhesive Surface Primer
20m Rolls Each 20m Rolls Drums
Solco Protection Boards
Bitumen / Polymeric
3mm thick
For heavy duty use
2m x 1m
Solco Corrugated Board
Plastic Corrugated
2mm thick
For light duty use
2m x 1m
Solco, Unit 51, Portmanmoor Road Industrial Estate, Ocean Park, Cardiff, CF24 5HB
Tel: 0845 450 9766
[email protected]
www.solco.co.uk
