ESOP 100% EMPLOYEE-OWNED
Quality and Service Taken Quality and Service TakenPersonally Personally'™
ISO 9001
Texas Facility Texas Facility
Introduction
July 2016 Edition July 2016 Edition Federal ID Number: 33-0596868 I| Duns Duns Number: Number: 15-697-3166 CageNumber:1VQY7 Number: 1VQY7 Federal ID Number: 33-0596868 15-697-3166 I| Cage
=ill j-=a
Hinges Hinges and and Industrial industrial Hardware Hardware
Illinois Illinois Facility Facility
Lancaster, TX Lancaster, TX
Bolingbrook, IL Bolingbrook, IL
Corporate Corporate Headquarters Headquarters 4041 Via Via Oro Beach, CA CA 90810 4041 Oro Avenue Avenue Long Long Beach, 90810
Quality Quality Policy Policy It It is isthe the policy policyof ofSierra SierraPacific PacificEngineering Engineeringand andProducts Productstotomeet meetand andexceed exceedour ourcustomers’ customers'requirements requirements in in aa consistent consistent fashion fashion by by providing providing the highest highest quality quality products productsin inthe theindustry industrywhile whilemaking makingaareasonable reasonableprofit. profit.This This policy policy is is fully fully supported by aa highly highly trained trained and and skilled skilled the supported by work force to contribute contributeactively actively to to our our continual continual improvement improvementprogram programand andby byaaquality qualitysystem systemininfull full compliance compliance with with the theISO ISO work force empowered empowered to 9001 our commitment commitment to tomaintaining maintainingsafe safe and andenvironmentally environmentally friendly friendly working working conditions conditions as as aa 9001 quality quality standard. standard. Furthermore, Furthermore, we we pledge pledge our responsible of our our community within which responsible member member of community within which our our business business prospers prospers and and our our employees employees reside. reside.
Value Value Hi-tech processes facilitate facilitate extremely extremely competitive competitivepricing. pricing. We We are Hi-tech manufacturing manufacturing processes are rarely rarely undersold. undersold.
Service Service Sierra Pacific Sierra PacificEngineering Engineeringand and Products Products is isaa100% 100%employee employee owned owned "ESOP" "ESOP"company. company.As Asowners, owners,everyone everyoneisisdedicated dedicatedtotothe theconcept concept that that our our customers are our our most most valuable valuable resource. resource. We We strive customers are strive to to serve serve our our customers customers as as we we would would want want to to be be served. served.
Innovation Innovation Our engineering is constantly which lead Our engineering team team is constantly developing developing new new products products which lead our our industry. industry.Cost Costreduction reductionand andproduct productimprovement improvement are are perpetual perpetual goals. to the theitems itemsfound foundininthis thiscatalog, catalog,we wealso alsosupply supply"custom "customhardware" hardware"toto many our customers. Our CAD,FEA FEA and andFDM FDM goals. In In addition addition to many ofof our customers. Our CAD, prototype machine are of the tools we we use use to to overcome overcome many many of obstacles encountered encountered when when developing developing aa new new product product from from prototype machine are some some of the tools of the the obstacles concept to production. production.We We are are interested interested in in working working with with you modifications of of our concept to you on on specially specially designed designed items items and/or and/or modifications our catalog catalog items. items.
General Guidelines General Guidelines •• Performance Performance and and Application Application Sierra Pacific The products Sierra PacificEngineering Engineeringand andProducts Productsisisaahigh highquality qualityand andcompetitive competitivesupplier supplierof ofhinges hingesand andindustrial industrialhardware. hardware.The products we we supply supply have through rigorous rigorous quality quality checking should only only be used as as they they were were intended. intended. Being Being that environment and and have gone gone through checking and and testing testing and and should be used that environment application conditions conditionsmay maydiffer differ for for each if the is correct application each of of our our customers, customers, itit isisup upto tothe thecustomer customer to to determine determine if the product product is correct for for their their application application by product is is correct correct for by using using our our recommendations recommendations as as guidelines guidelines and and conducting conducting their their own own testing testing to to insure insure that that the the product for their their intended intended use use and application. application. and The products under normal normal general general conditions, conditions, unless unless otherwise otherwise specified, specified, and The products we we supply supply have have been been tested tested under and results results should should not not be be taken taken as as safe to to use use for for all all varying If there custom specifications specifications you you need, need,give giveus usaa call call and and we we will will do all we safe varying extreme extreme conditions. conditions. If there are are certain certain custom do all we can can to to accommodate your your needs. accommodate needs. Continual Improvement Improvement •• Continual The products in order The products shown shown in in this this catalog catalog are are subject subject to to change change at at any any time time without without notice notice due due to to ongoing ongoing improvements improvements in order to to achieve achieve the the best possible quality. quality. Furthermore, best possible Furthermore, design, design, materials, materials, finishes, finishes,specifications, specifications,and anddimensions dimensionsare arepart part of ofthese these changes. changes. Please Please confirm confirm all allnecessary necessary characteristics characteristics are are correct correct prior prior to to your your purchase. purchase. Catalog Dimensional Drawings •• Catalog Dimensional Drawings All dimensions customer make make aa better betterinformed informeddecision. decision. When When you you find find All dimensions in inthis thiscatalog catalog are are for forreference referenceonly onlyand and are are shown shown to to help help the the customer what you you are are looking looking for, for, please us to to verify verify your what please contact contact us your selection selection and and make make sure sure you you are are completely completely satisfied satisfied with with your your purchase. purchase. Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
1
Table of Contents
SIERRA PACIFIC ENGINEERING AND PRODUCTS
C C O
I O CU
•
2
8–23 8-23
Pulls & Pulls & Knobs Knobs
Assist Handles Assist Handles. . . . . . . . BBQ Elbow BBQ Elbow Escutcheon Escutcheon. . Knobs. . . . Cast Zinc Die Cast Die Zinc Knobs Pulls. . . . . Zinc Pulls Cast Zinc Die Cast Die Pulls. . . . . . . . Extruded Pulls Extruded Pulls. . . . . . . . . Formed Pulls Formed Grab Handles Grab Handles.. . . . . . . . Knobs . . . . . . . . . . . . . Knobs Pulls. . . . . . . . . . Plastic Pulls Plastic Pulls. . . . . . . . . . Pocket Pulls Pocket Shower Shower Door Door Handles Handles. . . Wire Handles Wire Handles. . . . . . . . . Pulls. . . . . . . . . . . Wire Pulls Wire
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
21 . . . . . . 21 22 . . . . . . 22 23 . . . . . . 23
13, 16, 18 13,16,18 12, 16 . . . 12,16 17, 18 . . . 17,18 22 21, 22 . . . 21, 23 . . . . . . 23 . . . . 9 9, 19 19 10 . . . . . . 10 23 . . . . . . 23 13 . . . . . . 13 14, 15 . . . 14,15
24–49 Handles 24-49 Handles Handles. . . . . . . . . . . . . . . . . . . . . 316SS Handles 31655 (Pulls).. . . . . . . . . . . . . . . . Assist Handles Assist Handles (Pulls) Bellcore Handle Bellcore Handle. . . . . . . . . . . . . . . . . . . . Bidirectional L-Handle Bidirectional L-Handle. . . . . . . . . . . . . . . . L-Handles. . . . . . . . . . . . . . . Blind Mount Blind Mount L-Handles Cams . . . . . . . . . . . . . . . . . . . . . . . . . . Cams Cams, Roller Cams, Roller. . . . . . . . . . . . . . . . . . . . . . Cams, Single Cams, Single Point Point. . . . . . . . . . . . . . . . . . Cams, Three-Point Cams, Three-Point. . . . . . . . . . . . . . . . . . Chest Handles Chest Handles. . . . . . . . . . . . . . . . . . . . . Defeater Handle Defeater Handle. . . . . . . . . . . . . . . . . . . . Bracket. . . . . . . . . . . . . . . . . . . Lock Bracket Dual Lock Dual (Latches). . . . . . . . . . . . T-Handles (Latches) Folding T-Handles Folding L-Handles. . . . . . . . Front Front and and Blind Blind Mount Mount L-Handles T-Handles. . . . . . . . Front and Front and Blind Blind Mount Mount T-Handles Key. . . . . . . . . . . . . . . . . . . . . . Tool Key Hex Hex Tool HVAC Handles HVAC Handles. . . . . . . . . . . . . . . . . . . . . L-Handles. . . . . . . . . . . . . . . . . . . . Large L-Handles Large Accessories. . . . . . . . & T-HandleAccessories L- Handle LHandle &T-Handle Kit. . . . . . . . . . . . . . . Linen Chute Linen Chute Handle Handle Klt L-Handles. . . . . . . . . . . . . . . . . . Medium L-Handles Medium (Latches). . . . . . . . . . . . . . Handles (Latches) Paddle Handles Paddle L-Handles Padlocking Padlocking L-Hand les. . . . . . . . . . . . . . . . Plastic L-Handles Plastic L-Handles. . . . . . . . . . . . . . . . . . . Recessed Handles Recessed Handles.. . . . . . . . . . . . . . . . . . (Pulls). . . . . . . . . . . Handles (Pulls) Door Handles Shower Shower Door Small Black Small Black L-Handles L-Handles With With 3-Point 3-Point Cam Cam. . . . L-Handles With Small Chrome Small Chrome L-Handies With 3-Point 3-Point Cam Cam. . Small L-Handles Small L-Handles. . . . . . . . . . . . . . . . . . . . Bolt Latch Slam Bolt Small L-Handle Small L-Handle With With Slam Latch. . . . . . L-Handles.. . . . . . . . . Padlocking L-Handles Stamped Padlocking Stamped (Latches). . . . . . . . . . . . . . Handles (Latches) Swing Handles Swing T-Handles. . . . . . . . . . . . . . . . . . . . . . . . T-Handles Traffic Enclosure Traffic Enclosure Handles Handles. . . . . . . . . . . . . . Kit. . . . . . . . . . . . . . . Trash Chute Trash Chute Handle Handle Kit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90, 92 88, 90, 32,88, 31,32, . 31, 92 21 . . . . . . . . . . . . 21 31 . . . . . . . . . . . . 31 33 . . . . . . . . . . . . 33 40 . . . . . . . . . . . . 40 49 48, 49 . . . . . . . . . 48, 49 . . . . . . . . . . . . 49 48 . . . . . . . . . . . . 48 49 . . . . . . . . . . . . 49 24 . . . . . . . . . . . . 24 92–93 . . . . . . . . . 92-93 28 . . . . . . . . . . . . 28 57–60 . . . . . . . . . 57-60 41 . . . . . . . . . . . . 41 44, 45 . . . . . . . . . 44,45 31 . . . . . . . . . . . . 31 33 . . . . . . . . . . . . 33 35 . . . . . . . . . . . . 35 49 48, 49 . . . . . . . . . 48, 45 40, 45 . . . . . . . . . 40, 36 . . . . . . . . . . . . 36 50–60 . . . . . . . . . 50-60 30–34, 43 29,30-34,43 . . . 29, 33 . . . . . . . . . . . . 33 26 . . . . . . . . . . . . 26 23 . . . . . . . . . . . . 23 39 . . . . . . . . . . . . 39 38 . . . . . . . . . . . . 38 37 . . . . . . . . . . . . 37 40 . . . . . . . . . . . . 40 29, 43 . . . . . . . . . 29,43 97–99, 102 . . . . . 97-99,102 44, 45 . . . . . . . . . 44,45 32 . . . . . . . . . . . . 32 45 40, 45 . . . . . . . . . 40,
50–181 Latches 50-181 Latches Latches. . . . . Pull Latches Draw Pull Adjustable Draw Adjustable & Bar Bar Guide Bar Guide & Bar Keeper Keeper. . . . . . . . . Locks. . . . . . . . . . . . . . . . . . Bar Locks Bar Latches. . . . . . . . . . . . . . . . Boat Latches Boat Latches.. . . . . . . . . . . . . . . . Bolt Latches Bolt Latches. . . . . . . . . . . . . Butterfly Latches Butterfly Keepers. . . . . . . . . . . . . . Button Keepers Button Latches.. . . . . . . . . . . . . . . . Cab Latches Cab Locks).. . . . . . . (Cam Locks) Latches (Cam Cam Latches Cam Cams, One Cams, One Point Point.. . . . . . . . . . . . . Cams, Three Cams, Three Point Point.. . . . . . . . . . . . Cams, Two Cams, Two Point Point. . . . . . . . . . . . . . Latches (Hinges) Bolt Latches Cane Bolt Cane (Hinges).. . . . . . Latches.. . . . . . . . . Compartment Latches Compartment Latches, Large Compression Latches, Compression Large. . . . . . Latches, Long Compression Latches, Compression Long Body Body. . Latches, Small Compression Latches, Compression Small. . . . . . Latches, T-Handle Compression Latches, Compression T-Handle. . . Compression Pull Compression Pull Down Down Catch Catch. . . . Latches. Compression Spring Compression Spring Draw Draw Latches Latches. . . . . Spring Latches Compression Spring Compression Latches. . . . . . . . . . . . . Concept Latches Concept Bars.. . . . . . . . . . . . . Connecting Bars Connecting Rods. . . . . . . . . . . . . Connecting Rods Connecting Defeater Handle Defeater Handle. . . . . . . . . . . . . . Latch. . . . . . . Slam Latch Action Slam Double Action Double Latches. . . . . . . . . . . . . Pull Latches Draw Pull Draw Pull Latches Draw Pull Draw Latches with with Keeper Keeper. . . . Enclosure Latches Enclosure Latches.. . . . . . . . . . . . Latches. . . . . . . Explosion Venting Explosion Venting Latches
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Download =, DmoDas @ www.spep.com @ www.spep.com Download
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
148 . . . . 148 103 . . . . 103
166–171 166-171 109 . . . . 109 159–165 159-165 150–154 150-154 137, 139, 140 137,139,140 69 . . . . . . . . . 69 296–303 . . . . 296-303 100 . . . . . . . . 100 100 . . . . . . . . 100 100 . . . . . . . . 100 218–219 . . . . 218-219 70 46, 70 . . . . . . 46, 121 . . . . . . . . 121 122 . . . . . . . . 122 120 . . . . . . . . 120 122 . . . . . . . . 122 134 . . . . . . . . 134 126 . . . . . . . . 126 106, 107 . . . . 106,107 89 . . . . . . . . . 89 103 . . . . . . . . 103 101 . . . . . . . . 101 92–93 . . . . . . 92-93 66 . . . . . . . . . 66 146 . . . . . . . . 146 144, 145 . . . . 144,145 80–93 . . . . . . 80-93 71 70, 71 . . . . . . 70,
68 Finger Latch Finger Latch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 87, 120 Pulls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87,120 Finger Pulls Finger 109 Latches.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Flush-Mount Latches Flush-Mount 63 Flush Slam Flush Slam Latches Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 57, 59, 60 Folding T-handles Folding T-handles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57,59,60 325 (RV Products) Latch (RV Gate Latch Gate Products). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 104 Turn Latch Hex Turn Hex Latch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 50 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Release Accessories Inside Release inside 127, 135, 136, 137, 139, 140 Keepers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127,135,136,137,139,140 Keepers 132 Keepers, Small Keepers, Small. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 64 Key Locking Key Locking Bolt Bolt Latch Latch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 89 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Key Locking Key Locking Quarter-turn Quarter-turn Latches 155 Kick-up Shim Kick-up Shim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 105 Latch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Turn Latch Handle Turn Knob Handle Knob 108, 110, 111, 112, 114 Lever Latches Lever Latches.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108,110,111,112,114 93 92, 93 L-handle Defeater L-handle Defeater.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 88 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 L-handle Quarter-turn L-handle Quarter-turn Latches 105 L-Handle L-Hand le Turn Turn Latches Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 115, 117, 118, 119 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115,117,118,119 Turn Latches and Turn Lift and Lift 150–154 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150-154 Link Lock Link Lock Rotary Rotary Draw Draw Latches 77, 78 75, 77, 74, 75, 78 Catches.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74, Magnetic Catches Magnetic 174, 175 173, 174, 172, 173, 170, 172, 169, 170, 168, 169, 167, 168, 166,167, 175,, 176 176,, 177 177 Latches. . . . . . . . . 166, Multipoint Latches Multipoint 104 Enclosure Latch NEMA 11 Enclosure NEMA Latch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 137, 138 136, 137, 134, 136, 127, 134, 138,, 140 140 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . 127, Center Latches Over Center Over 141 Corners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Square Corners Latches with Center Latches Over Center Over with Square 108 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Lever Latches Center Lever Over Center Over 50–55 Paddle Handles Paddle Handles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-55 50 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Handles Accessories Paddle Handles Paddle 87 Padlock Cup Padlock Cup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 89 Padlocking Padlocking Defeater Defeater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 197 Panel Board Panel Board Latch Latch.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 108 Panel Fastening Panel Fastening Rotary Rotary Latch Latch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 106–107 Panel Latches, Panel Latches, Spring Spring Loaded Loaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106-107 , 104, 107, 109, 115–122 , 9595,104,107,109,115-122 , 89 , 87 82, 83 80, 82, 83,, 85 85, 87, 89, Latches. . . . . . . . . . . . . . . . 80, Pawl Latches Pawl 95 Pawls for Pawls for Latches Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 123 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Compression Latches Pull Down Pull Down Compression 125, 128–133 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125,128-133 Pull Down Pull Down Latches 65 Tabs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Pull Tabs Pull 65 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Push Push Button Button Latches 77 Push-off Magnetic Push-off Magnetic Catch Catch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 65–70 63, 65-70 Close. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, Push to Push to Close 91 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Cabinet Latches Quarter-turn Cabinet Quarter-turn 88, 89 85, 88, 83,85, 82,83, 89 Latches.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, Quarter-turn Latches Quarter-turn 95 Pawls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Latch Pawls Quarter-turn Latch Quarter-turn 90 Swing Handle Quarter-turn Swing Quarter-turn Handle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 102 System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Rod Control Rod Control System 53, 61, 101 Rod Guides Rod Guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53,61,101 61, 101 Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61,101 Rods 108 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Rotaty Latches Rotaty 116 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Compression Latches Round Compression Round 156, 157 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156,157 T-Handle Latches Rubber T-Handle Rubber 322–323 (RV Products) Latches (RV RV Door RV Door Latches Products). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322-323 68 RV Latches RV Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 322 Latches.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 RV Screen RV Screen Door Door Latches 155 Sash Latch Sash Latch.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 322–323 (RV Products) Screen Door Screen Door (RV Products). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322-323 104 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Turn Latches Screwdriver Turn Screwdriver 112, 114 Lever Latches Compression Lever Sealed Sealed Compression Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112,114 139 Secondary/Safety Secondary/Safety Latch Latch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 23 (Pulls).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Catches (Pulls) Door Catches Shower Door Shower 70 Strike. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Slam Action Slam Action Strike 69, 72 68, 69, 67, 68, 72 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, Slam Latches Slam 105 Fastener. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Snap Fastener Snap 74 Catches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Snap-in Magnetic Snap-in Magnetic Catches 70, 71 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70,71 Spray Booth Spray Booth Latches 218, 219 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218,219 Bolt Latches Loaded Bolt Spring Loaded Spring 105 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Spring Spring Loaded Loaded Latches 135 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Center Latches Over Center Spring Spring Loaded Loaded Over 106–107 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106-107 Panel Latches Loaded Panel Spring Spring Loaded 131 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Center Latches Over Center Stamped Over Stamped 99 98, 99 Swing Handles Swing Handles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 88 Latch.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 T-handle Quarter-turn T-handle Quarter-turn Latch 57, 59 T-Handles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57,59 T-Handles 158 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Draw Latches Thermoplastic Draw Thermoplastic 94 Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Cam Kit Point Cam Three Point Three 166–177 Latches.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166-177 Door Latches Point Door Three Point Three 73 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Tipper Latches Tipper 80 T-Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 T-Latches 89 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Tool Activated Tool Activated Quarter-turn Quarter-turn Latches 52 Box Latches Tool Box Tool Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 110, 111 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110,111 Trigger Latches Trigger 120 Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Lock Key Tubular Lock Tubular 150–154 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150-154 Twist Latches Twist
Hinges and Hinges and Industrial Industrial Hardware Hardware . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
177 . . . . 177 172–179 172-179 145 . . . . 145 70–71 . . 70-71 73 . . . . . 73
182–202 182-202
JIC NEMA NEMA & &JIC
Accessories. . . . . . . Latch Accessories Cabinet Latch Cabinet Latches. . . . . . . . . . . . . . Cabinet Latches Cabinet Bolts. . . . . . . . . . . . . Cam Bolts Center Cam Center Center Cams Center Cams. . . . . . . . . . . . . . . . Kit. . . . . . . . . . . . . . . . Stop Kit Door Door Stop Drawing Drawing Pockets Pockets. . . . . . . . . . . . . Kits. Electrical Electrical Box Box Hinge Hinge Assembly Assembly Kits Enclosure Enclosure Hinges Hinges. . . . . . . . . . . . . Hinge Assemblies Assemblies. . . . . . . . . . . . . Hinge Block. . . . . . . . . . . . . . . . . Hinge Hinge Block JIC Clamp JIC Clamp Brackets Brackets. . . . . . . . . . . . JIC Padlock JIC Padlock Staples Staples. . . . . . . . . . . . JIC Quick JIC QuickRelease Release Clamp Clamp. . . . . . . . Vent. . . . . . . . . . . . . . . Louvered Louvered Vent Ring.. . . . . . . Cover Sealing Meter Cover Sealing Ring Meter Foot.. . . . . . . . . . . . . . Mounting Mounting Foot Multipoint Multipoint Latches Latches. . . . . . . . . . . . NEMA NEMACam Cam Lock Lock.. . . . . . . . . . . . . NEMA NEMAClamp Clamp Brackets Brackets. . . . . . . . . . Kits. . . . . . . . NEMA NEMAClip ClipAssembly Assembly Kits NEMA NEMAHold-down Hold-down Clamp Clamp. . . . . . . . / JIC Accessories NEMA NEMA/JIC Accessories. . . . . . . . . Kits. . NEMA NEMALever LeverClamp Clamp Assembly Assembly Kits Hole Seals Oil-Tight Oil-light Hole Seals.. . . . . . . . . . . & Staple Padlock Padlock Hasp Hasp & Staple Set Set. . . . . . . Panel Panel Board Board Latch Latch.. . . . . . . . . . . . Kit. . . . . . Assembly Kit Panel Panel Support Support Assembly Print Print Pockets Pockets. . . . . . . . . . . . . . . . Rod Rod Guides Guides. . . . . . . . . . . . . . . . . Corner Hinge Square Corner Square Hinge.. . . . . . . . . . Three Point Three Point Latches Latches. . . . . . . . . . .
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
186, 187 186,187 182–185 182-185 186 . . . . 186 187 . . . . 187 196 . . . . 196 197 . . . . 197 200 . . . . 200 201 200, 201 200, 202 . . . . 202 243 . . . . 243 193, 194 193,194 194 . . . . 194 195 . . . . 195 197 . . . . 197 195 . . . . 195 192 . . . . 192 182, 183, 184, 185 182,183,184,185 303 . . . . . . . . . . . 303 193 . . . . . . . . . . . 193 188, 189, 190 . . . 188,189,190 188, 189 . . . . . . . 188,189 195 . . . . . . . . . . . 195 191 . . . . . . . . . . . 191 198, 199 . . . . . . . 198,199 192 . . . . . . . . . . . 192 197 . . . . . . . . . . . 197 192 . . . . . . . . . . . 192 197 . . . . . . . . . . . 197 186 . . . . . . . . . . . 186 200 . . . . . . . . . . . 200 , 185 183, 184 182, 183, 182, 184,185 . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
203–289 203-289 Hinges Hinges
216 Spring Loaded Adjustable Spring Adjustable Loaded Hinge Hinge.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 252–255 Barrel Barrel Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252-255 252 251, 252 Bullet Bullet Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251, 230, 232 222, 230, 221, 222, 220, 221, 232,, 233 233 Butt Butt Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220, 223 Holes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Butt Butt Hinges Hinges with with Swage Swage and and Holes 219 218, 219 Bolt Latches Cane Bolt Cane Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218, 226 Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 Concealed Hinges Concealed 213 Enclosure Hinges Continuous Enclosure Continuous Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 206–212 Continuous Continuous Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206-212 212 Stop Hinges Continuous Continuous Stop Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 247 233, 247 232,233, Die Die Cast Cast Zinc Zinc Enclosure Enclosure Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232, 233, 247 232, 233, 228,232, 247 Die Die Cast Cast Zinc Zinc Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228, 217 Dual Dual Spring Spring Release Release Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 213 Electronic Electronic Enclosure Enclosure Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 228 213, 228 Enclosure Enclosure Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213, 249 248, 249 Flag Flag Joint Joint Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248, 283 276, 283 Flush Flush Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276, 275 274, 275 271,274, Friction Friction Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271, 229 228, 229 Hinge Hinge Assemblies Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228, 242–244 Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242-244 Hinge Hinge Blocks 212 Hinge Hinge Pins Pins.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 205 204, 205 Hinge Hinge Terminology Terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204, 227 Institutional Institutional Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 264, 265 263, 264, 259, 263, 258,259, , 257,258, , 248257, 245248, 265 Lift-off Lift-off Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . 245, 249 248, 249 Loose Loose Joint Joint Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248, 224, 225 Marine Stainless Marine Stainless Steel Steel Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224,225 288, 289 287, 288, 286,287, 289 Seal Hinges Over Over the the Seal Hinges.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286, 206–212 Piano Piano Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206-212 211 210, 211 Piano Piano Hinges Hinges with with Holes Holes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210, 212 Piano Piano Stop Stop Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 212 Pins Pins for for Hinges Hinges.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 268 267, 268 266,267, Plastic Plastic Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266, 266 261, 266 Lift-Off Hinge Plastic Plastic Lift-Off Hinge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261, 269 Plastic Plastic Take-apart Take-apart Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 216 Single Action Single Action Spring Spring Hinge Hinge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 249 248, 249 213,248, Slip Joint Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213, Slip Joint 233 230, 233 Specialty Specialty Butt Butt Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230, 233, 247 228, 233, 227,228, 226,227, 247 Specialty Hinges Specialty Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226, 214, 215, 216 Spring Loaded Spring Loaded Hinges Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214,215,216 217 Spring Release Spring Release Hinges Hinges.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 284 Corner Hinge Square Corner Square Hinge.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284 230 Hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 Butt Hinges Stamped Butt Stamped 212 Hinges.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 Stop Hinges Stop
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
281, 284–289 280, 281, , 279,280, 277279, 277, 284-289 268, 269 249, 268, 248,249, 213,248, . . . . 213, 269 277 . . . . . . . . . . . . . . . . . . . 277 253, 255 252, 253, 251,252, . . . . . . . . 251, 255
Kit. StapleKit and Staple Hasp and Safety Hasp Hinge Safety Double Double Hinge Kits. . . . . . . . . . Staple Kits Swivel Staple and Swivel Hasp Hasp and & Staple Hasp & Heavy Heavy Duty Duty Hasp Staple. . . . . . . . . . . & Staple Light Light Duty Duty Hasp Hasp & Staple. . . . . . . . . . . . & Staples Hasp & Safety Hasp Safety Staples. . . . . . . . . . . . . . Latch. . . Hasp Latch Type Hasp Single Point Single Point Padlock PadlockType Specialty Hasp Specialty Hasp. . . . . . . . . . . . . . . . . . . SS Hasps SS Hasps. . . . . . . . . . . . . . . . . . . . . . . Swivel Staple SS Marine SS Marine Hasp Hasp and and Swivel Staple. . . . . . SS Staples SS Staples. . . . . . . . . . . . . . . . . . . . . . Hasp. . . . . . . . . . . . . . . . . . . Stamped Hasp Stamped Staples. . . . . . . . . . . . . . . . . Stamped Staples Stamped Strap Hasp Strap Hasp and and Staples Staples. . . . . . . . . . . . . & Staple Swivel Safety Swivel Safety Hasp Hasp & Staple. . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
Lock. . . . . . . . . . . . . . . Cam Lock Allen Wrench Allen Wrench Cam Lock. . . . . . . . . . . . . . . Bellcore Bellcore Style Style Cam Cam Lock Lock Dust Cam Lock Cam Dust Covers Covers. . . . . . . . . . . . . . . . Lock Finger Cam Lock Cam Finger Pulls Pulls. . . . . . . . . . . . . . . . Cam Lock Cam Lock Information Information. . . . . . . . . . . . . . . . Parts. . . . . . . . . . . . . . . . . . . Component Parts Component Miscellaneous Cams Miscellaneous Cams. . . . . . . . . . . . . . . . . Lock Cylinder Padlocking Padlocking Lock Cylinder. . . . . . . . . . . . . . Locks Form Cam Locks Order Cam Special Order Special Form. . . . . . . . . . Lock. . . . . . . . . . . . . . Cam Lock Loaded Cam Spring Loaded Spring Cams. . . . . . . . . . . . . . Offset Cams and Offset Straight and Straight Locks. . . . . . . . . . . . . . Cam Locks Zinc Die Zinc Die Cast Cast Cam Zinc Die Zinc Die Cast Cast Latch Latch. . . . . . . . . . . . . . . . . . Lock. . Cam Lock Zinc Die Cast Cast Screwdriver-Keyed Screwdriver-Keyed Cam Zinc Die
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
JIC). . . . . . . . . . . . . . . . . . . . . . . & JIC) (NEMA& Stops(NEMA Door Door Stops D-Ring D-Ring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Eyebolts Eyebolts (Miscellaneous) (Miscellaneous). . . . . . . . . . . . . . . . . . . . . . . Female Female Door Door Socket Socket. . . . . . . . . . . . . . . . . . . . . . . . . . Loops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Footman Footman Loops Forged Forged Chain Chain Retainer Retainer.. . . . . . . . . . . . . . . . . . . . . . . . Tie Downs Forged Forged Tie Downs.. . . . . . . . . . . . . . . . . . . . . . . . . . . Lift-Up Lift-Up Door Door Holder Holder. . . . . . . . . . . . . . . . . . . . . . . . . . Locker Locker Hooks Hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Male Door Male Door Holders Holders. . . . . . . . . . . . . . . . . . . . . . . . . . . Plastic Plastic Door Door Holders Holders. . . . . . . . . . . . . . . . . . . . . . . . . . Rope Rope Hooks Hooks.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wire Door Loaded Wire Spring Loaded Spring Door Holders Holders. . . . . . . . . . . . . . . . . Hold-Backs.. Door Hold-Backs Socket Door Ball and Aluminum Ball Three-Piece Aluminum Three-Piece and Socket Tie Down Tie Down Information Information. . . . . . . . . . . . . . . . . . . . . . . . . Tie Down Tie Down Rings Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tie Downs Tie Downs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tie Off Tie Off Rings Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wire Door Wire Door Holder Holder Plastic Plastic Base Base. . . . . . . . . . . . . . . . . . . . Wire Door Wire Door Holders Holders. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
328–329 328-329 314 . . . . 314 320 . . . . 320 319 . . . . 319 315 . . . . 315 311 . . . . 311 319 . . . . 319 314 . . . . 314 313 . . . . 313 319 . . . . 319 311 . . . . 311 312 . . . . 312 315 . . . . 315 317 . . . . 317 316, 318, 319 316,318,319 318 . . . . . . . . 318 310 . . . . . . . . 310 310 . . . . . . . . 310
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
Strap Hinges Strap Hinges. . . . . Take-apart Hinges Take-apart Hinges. T-Hinges. . . . . . . . T-Hinges Weld-on Hinges Weld-on Hinges. . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
290–295 290-295
Hasps Hasps & & Staples Staples
Cam Locks Cam Locks & &Accessories Accessories
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
290 290 292 292 290 290 291 291 290 290 295 295 291 291 294 294 294 294 294 294 291 291 295 295 293 293 290 290
Table of Contents
Two Point Two Point Door Door Latch Latch. . . . . . . . Three Point Two &&Three Two Point Door Door Latches Latches. Under Under Center Center Latches Latches. . . . . . . . Venting Latches Venting Latches. . . . . . . . . . . . Slam Action Weld-on Slam Weld-on Action Latches Latches. . .
Er
O
3 tto
PF PF
H
296–309 296-309
& Door Tie Downs Tie Downs & Door Holders Holders
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
298 298 298 298 308 308 308 308 305 305 309 309 306 306 303 303 304 304 299 299 306, 307 306,307 299 296, 299 296, 297 . . . . 297 297 . . . . 297 . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
310–320 310-320 . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
196 . . . . 196 318 . . . . 318
321–326 321-326
RV RVProducts Products
Bumpers Bumpers. . . . . . . . . . . . . . Locks).. . (Cam Locks) Latches (Cam Cam Latches Cam Folding Folding Steps Steps.. . . . . . . . . . Latch.. . . . . . . . . . . . Gate Latch Gate License License Plate Plate Holders Holders. . . . . Magnetic Catches Magnetic Catches.. . . . . . . RV RVScreen Screen Door Door Latches Latches.. . . RV RVVents Vents. . . . . . . . . . . . . . Slide Bar Slide Bar Latches Latches (Latches) (Latches). . Switch Cups Switch Cups. . . . . . . . . . . Vents . . . . . . . . . . . . . . . Vents
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
326 . . . . 326 296–303 296-303 325 . . . . 325 325 . . . . 325 324 . . . . 324 77–82 . . 77-82 322 . . . . 322 321 . . . . 321 68 . . . . . 68 321 . . . . 321 321 . . . . 321
327–330 327-330 Miscellaneous Miscellaneous (RV Products) Bumpers Bumpers (RV Products). . . . . . . . (RV Products) Steps (RV Folding Folding Steps Products). . . . . Lid Lid Stays Stays. . . . . . . . . . . . . . . . . . (Latches). . . . . Catches (Latches) Magnetic Magnetic Catches & JIC).. (NEMA &JIC) Seals(NEMA HoleSeals Oil-tight Oil-tight Hole Plain Plain Eyebolts Eyebolts. . . . . . . . . . . . . . Eyebolts. . . . . . Shoulder Pattern Shoulder Pattern Eyebolts Snaps . . . . . . . . . . . . . . . . . . . Snaps Table Braces Table Braces. . . . . . . . . . . . . . . Vents . . . . . . . . . . . . . . . . . . . Vents
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
To To Place Place Order: Order.
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
800.433.5554 800.433.5554
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . .
. . . .
326 . . 326 325 . . 325 327 . . 327
77–82 77-82 198–199 198-199 328 . . . . 328 329 . . . . 329 330 . . . . 330 327 . . . . 327 321 . . . . 321
[email protected] [email protected]
3 3
SIERRA PACIFIC ENGINEERING AND PRODUCTS money saver money saver 316SS material 316SS material
316SS
NEMA
4x
UL ULrated rated
meets NEMA 44 meets NEMA enclosure enclosure requirement requirement
meets IP64 meets IP64 enclosure requirement mp enclosure requirement
meets NEMA 4X 4X meets NEMA enclosure enclosure requirement requirement
RATE
•a
12
8 - 23
meets IP65 meets IP65 enclosure enclosure requirement requirement
IP6
"I/ ) 111 9
Pulls & Knobs
10
ADA
meets ADA requirements meets ADA requirements
10 10
14
8
8
14 114
9 9
patent patent pending pending
meets IP66 meets IP66 enclosure enclosure requirement requirement
meets NEMA 12 meets NEMA 12 enclosure enclosure requirement requirement
NEM
UV UVstabilizers stabilizers
patented design patented design
20 20
17 17 20 20 21 16
10
11 111111E. '
22
41111*
4116 11.1
.
19 19 12
19 19
(
21 21
r CP
13
12 20 20
a
IP
22 22
18 18
19
skido 18
23
23 23
10 10
12
23 23
24 - 49 43 29
26
31
32
28 47
31 31
Handles
25 33 48 43 43 47
33
to
24
48
26
Ilk /4 ▪▪c'
499
48 48
45 45
24 24 35 34
40 40
39 39
41
45 4i 45 24 24
4 4
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Hinges and Hinges and Industrial Industrial Hardware Hardware Slam Latches Slam Latches
Quarter-turn Cam Latches Latches Quarter-turn Cam
50 - 181
84
92
62
63
71
93
66 66
65
72
68
70
73
73 67
Recessed Latches Recessed Latches 91
11 ,•
91 97 90 88
102
-1 -
54
55
50
60 60 122 96
53
58
60
56
Magnetic Latches Magnetic 86
87 81
82 82
75
qt tat° r
1.0„ '41110), 41
41
76
1 14b
Latches
96 94
%W 79„ AllpD 78 78
74
A."
Bolt Latches Latches Bolt
80 100 100
120 120
84 84
84 7174"
Compression Latches Latches Compression 159
165 161
117
162
160
MultipointLatches Latches Multipoint 112
113
110
155
180 108
106 171
Draw Latches Latches Draw
141
152
180
147
171
156
150 141
180 180 172
166
179
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
5 5
SIERRA PACIFIC ENGINEERING AND PRODUCTS 182 - 202
196
NEMA & JIC
201 201
187
197 243 189 303 195 186
192
197
193
194
200 195 198 202
182
203 - 289 206 230
220
238
211 216
282
240
288
284
276
227
216
245 277
242
241
271
271
246
277 243
Hinges
219
269
244
274 239 274 282
242
270 237 217
238
244 269 250 274
247
258
268 235 226 240 257
240
202
267
272
279 234
6 6
Download 3DmoDELs @ www.spep.com Download @ www.spep.com
232
230
256
257
249
Hinges and Hinges and Industrial Industrial Hardware Hardware
290 - 295 295
Hasps & Staples
295
290 290 293 293
294
290 290
294
rT ri 4308 7.
295 295
292 292
294 29 4
298
296 - 309
298
299 303
308
297 299
302
309 309
308
308
298
302
r4'41t\S
4
309 309
308 308
300 300
309 309
297
302
tir
299 299
Cam Locks
302
41/i 301 301
298 298
300 300
297
OP
299
296 296
310 - 320 311 314
315
315
318
Tie Downs & Door Holders
318
312
310 313
313
319
319 320
319
317
316
317
321 - 326
321
321
323
325
325 326
RV Products
325
324
321
324
321
322
327 - 330 327
327
327
330
329
327 329 328
330
Miscellaneous
330
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
7 7
Pulls & Knobs
SIERRA PACIFIC •-""'"GAND PRODUCTS
Flush Round Flush Round Pocket Pocket Pull Pull Part Number
O
J3006 J3006
C
Material Material
Finish
304SS 30455
brushed brushed
more comfortable for aa more handle edge edge Is comfortable grip grip hemmed for is hemmed ►handle
1.12[22.5] 1.12 28.5
A2[1013]
4.06 103.2
.42 10.6
4.75 120.5
3
120° (3) PLACES
10.(3) 2PLACES 4 TM.
10-24 THD. (3) PLACES
2.44 62.0
.50[12.8 ] .58[142] .50 12.8
3.52 89.4 (3) PLACES
.56 14.2
4.68 118.9
REARNEW
RIGHT
FImWT VIEW
REAR VIEW
elny RIGHT SIDE VIEW
FRONT VIEW
0-250 (3)HOLES
1.76 [44.7]
6.35 .250 [6.35] (3) HOLES
1.76 44.7
120°
3.05 77.4
3.63 92.1 HOLE
4.06 103.2
120°
3.52 89.4
MOUNTING DIMENSIONS
DIMENSIONS MOUNTING MOUNTING DETAILS
Flush Pocket Pulls Pulls Flush Pocket
EW
T
FF
AMILY
G
.22[55] 2-
B
.22 5.5
B
CENT.
stud mounting stud mounting
C CENT.
CENT.
E CENT.
C CENT.
A
F
F CENT.
E
H J
1 2 D
FRONTVIEW
FRONT VIEW
Part No. Part No.
Mounting Mounting
A A
.STUD 37[9.4OPTI ] LONG_. ON 1 RIGHT SIDE VIEW .37 9.4 LONG STUD OPTION
RIGHT SIDE VIEW
B
C
M4(4 ) PLACES, THD. STUDS NUTS SEEORTABLE REAR VIEW
M4 THD. STUDS OR NUTS (4) PLACES, SEE TABLE
\ 0.(41)77[4. HOLES50] .177 4.50 (4) HOLES
MOUNTING DAMNSMNI3
nut mounting mounting nut
MOUNTING DIMENSIONS
REAR VIEW
D
E
•Mj
J
F
G
H 3.90 [99.0] 3.90 [99.0]
2.52 2.52 [64.0] [64.0]
J3008-1 J3008-1
studs studs
5.43 5.43 [138.0] [138.0]
3.46 3.46 [88.0] [88.0]
3.74 3.74 [95.0] [95.0]
[110.00] 4.331[110.00] 1.44 1.44[36.5] [36.5] 4331
2.559 [65.00] 2.559 [65.00]
.81 [20.5] [20.5] .81
J3008-2 J3008-2
studs studs
4.37 [111.0] 4.37 [111.0]
2.54 2.54 [64.5] [64.5]
2.76 2.76 [70.0] [70.0]
1.10 1.10 [28.0] [28.0]
[88.00] 3.465 [88.00] 3.465
1.496 1.496 [38.00] [38.00]
.57 [14.5] .57 [14.5]
2.87 2.87 [73.0] [73.0]
1.65 1.65 [42.0] [42.0]
J3008-3 J3008-3
studs studs
3.70 3.70 [94.0] [94.0]
[60.0] 2.36 236 [60.0]
[60.0] 2.36 236 [60.0]
1.10 1.10 [28.0] [28.0]
2.992 2.992 [76.00] [76.00]
1.260 1.260 [32.00] [32.00]
.47 .47 [12.0] [12.0]
[63.0] 2.48 2.48 [63.0]
[43.0] 1.69 1.69 [43.0]
J3009-1 J3009-1
nuts nuts
5.43 5.43 [138.0] [138.0]
3.46 [88.0] 3.46 [88.0]
3.74 [95.0] 3.74 [95.0]
[110.00] 4.331[110.00] 1.44[36.5] [36.5] 4.331 1.44
2.559 2.559 [65.00] [65.00]
.81 [20.5] .81 [20.5]
3.90 3.90 [99.0] [99.0]
2.52 2.52 [64.0] [64.0]
J3009-2 J3009-2
nuts nuts
[111.0] 4.37 [111.0] 437
2.54 [64.5] 2.54 [64.5]
2.76 [70.0] 2.76 [70.0]
1.10 1.10 [28.0] [28.0]
3.465 [88.00] 3.465 [88.00]
1.496 1.496 [38.00] [38.00]
.57 [14.5] .57 [14.5]
2.87 [73.0] 2.87 [73.0]
1.65 1.65 [42.0] [42.0]
J3009-3 J3009-3
nuts nuts
3.70 [94.0] 3.70 [94.0]
[60.0] 2.36[60.0] 2.36 236 [60.0] [60.0] 236
[76.00] 2.992[76.00] 1.10 1.10[28.0] [28.0] 2.992
[32.00] 1.260 1260 [32.00]
.47 [12.0] [12.0] .47
2.48 2.48 [63.0] [63.0]
1.69 1.69 [43.0] [43.0]
►material: material: 304SS 304SS ►finish: brushed finish: brushed
8 8
Download Download
3DMODELS @ www.spep.com www.spep.com @
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industri -1 Hardware Hardwire
Material Material
Finish Finish
92-01 92-01 92-02 92-02 92-03 92-03
glass glass reinforced reinforced plastic plastic
black black textured textured
92-04 92-04
Min. Panel Panel Min. Thickness Thickness
Max. Panel Panel Max. Thickness Thickness
.04 [1.0] .04 [1.0]
.07 [1.8] .07 [1.8]
.07 [1.8] .07 [1.8]
.13 [3.3] .13 [3.3]
.13 [3.3] .13 [33]
.19 [4.8] .19 [4.8]
.19 [4.8] .19 [4.8]
.25 [6.3] .25 [6.3]
MAX. R.03 R 03 [.88] MAX (4) PLACES ]]\
4.51 .01 114.5 .3 4.51±.01[[114.5±.3]
A V
1.50 .01 [38.0±.2] 38.0 .2 1.50±.01
forlifting lifting or or pulling pulling I for includes(2) (2) self-tapping self-tapping screws screws I includes
V
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Pulls & Knobs
Flush Pocket Flush Pocket Pulls Pulls Part Part Number Number
PANEL THICKNESS
A
unassembled unassembled 2.53 64.3 2.53[ 64.3]
.91 23.0 .91[23.0]
1.84 46.6 1.84[46.6]
A
1.00 25.4 ] 1.00[25.4 SECTION A-A SECTION A-A
3.60 91.4 3.60[ 91.4 4.84 122.9 4.84[122.9]
Large Plastic Plastic Pocket Large Pocket Pull Pull Part No.
93-01 93-01
Material
Finish
glass reinforced glass reinforced plastic plastic
black black textured textured
DIM B
Panel Cut-out Pa
Door Thickness
Dim A A Dim
Dim B B Dim
0.059 [1.50] .079 [2.00] [2.00] 0.059 [1.50] --.079
1.960 1.960 + + 0.007 0.007 [49.80 0.20] [49.80 ++ 0.20]
3.937 0.019 3.937-- 0.019 [100.00 [100.00 -- 0.50] 0.50]
0.079 [2.00] 0.079 [2.00] -- 0.118 0.118 [3.00] [3.00]
1.968 1.968 + + 0.011 0.011 [50.00 [50.00 + + 0.30] 0.30]
3.937 0.019 3.937-- 0.019 [100.00 [100.00 -- 0.50] 0.50]
DIM A
MOUNTING DIMENSIONS DIMENSIONS MOUNTING 4.33 110.0
forlifting lifting or or pulling pulling I for snapsinto intoplace placeand and fasteners fasteners are I snaps are not not required required
2.0 .08 [2.0]
26.0 1.02 [26.0]
DOOR THICKNESS
A
1.54 39.0
2.26 57.5
A-44-1 A
SECTION A-A SECTION A-A
94.0 3.70 [94.0] FRONT VIEW FRONT VIEW
Small Plastic Pocket Small Plastic Pocket Pull Pull Part No. Part No.
93-02 93-02
Material Material
Finish Finish
glass reinforced glass reinforced plastic plastic
black black textured textured
Door Thickness Thickness Door 0.030 [0.75] 0.030 [0.75] -- 0.039 0.039 [1.00] [1.00]
LW)
DIM B
Panel Cut-out Panel Cut-out Dim A A Dim
Dim B B Dim
DIM A
1.377 3.346++0.011 0.011 1377 + + 0.007 0.007 3.346 [35.00 [85.00 + + 0.30] [35.00++0.20] 0.20] [85.00 030]
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
1.417 + 3.346++0.011 0.011 0.039 [1.00] 0.078 [2.00] 1.417 + 0.007 0.007 3.346 0.039 [1.00] -- 0.078 [2.00] [36.00 [85.00 + + 0.30] [36.00++0.20] 0.20] [85.00 030]
3.70 94.0
.06 1.5
A
forlifting lifting or or pulling pulling I for placeand and fasteners fasteners are snapsinto intoplace I snaps are not not required required
17.0 .67 [17.0]
DOOR THICKNESS
1.11 28.2
1.63 41.3
A
3.15 80.0
SECTION A-A
FRONT VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
9
Pulls & Knobs
a"."C
ENGINEERING AND PRODUCTS
Flush Pocket Flush Pocket Pulls Pulls Part Part Number Number
O C
3.70 94.0
.09 2.2 .09[2.2]
.71 18.1 71[10.1]
A
3
1.55 39.4 1.55[39.4]
A A PANEL THICKNESS
3.24 82.3 3.24[82.3]
Material Material
.040-.055 [1.02-1.40] [1.02-1.40] .040-.055
ABS ABS
91-10BK02 91-10BK02
.055-.070 [1.40-1.78] [1.40-1.78] .055-.070
ABS ABS
91-11BK 91-11BK
.070-.085 [1.78-2.16] [1.78-2.16] .070-.085
ABS ABS
91-12BK 91-12BK
.085-.100 [2.16-2.54] [2.16-2.54] .085-.100
ABS ABS
Finish Finish
black, black, textured textured
forlifting lifting or or pulling pulling I for snap-ininstallation installation I snap-in ►UL UL 94-HB 94-HB rated rated cut-out:3.45 3.45±.01 ±.01[87.6 [87.6±.3] ±.3]xx 1.210 1.210 ±.005 ±.005 [30.7 [30.7 ±.13] I cut-out: ±.13] with with R.06 [1.5] R.06 [1.5] corners corners
1.06 26.9 146[26.9]
--11-z,NaNES.
FRONT VIEW
Panel Thickness Thickness Panel
91-09BK02 91-09BK02
SECTION A-A
Flush Pocket Flush Pocket Pulls Pulls Part Part Number Number
5.49 139.4 5.49[139.4]
.09 2.2 .09[2.2]
.71 18.1 71[16 .1]
A-4-, A
1.55 39.4 1.55[39.4]
1.05 26.7
Panel Panel Thickness Thickness
Material Material
91-19BK02 91-19BK02
.040-.055 [1.02-1.40] [1.02-1.40] .040-.055
ABS ABS
91-20BK02 91-20BK02
.055-.070 [1.40-1.78] [1.40-1.78] .055-.070
ABS ABS
91-21BK 91-21BK
.070-.085 [1.78-2.16] [1.78-2.16] .070-.085
ABS ABS
91-22BK 91-22BK
.085-.100 [2.16-2.54] [2.16-2.54] .085-.100
ABS ABS
Finish Finish
black, black, textured textured
forlifting lifting or or pulling pulling I for ► snap-in snap-in installation installation ►UL UL 94-HB 94-HB rated rated cut-out:5.20 5.20±.01 ±.01[132.1 [132.1 ±3] ±.3]xx1.210 1.210 ±.005 ±.005 [30.7 [30.7 ±.13] ±.13] with I cut-out: with R.06 [1.5] R.06 [1.5] corners corners
A A-4 PANEL THICKNESS
5.00 .00[ 127.0 27.0]
SECTION A-A
FRONT VIEW FRONT VIEW
Flexible Flush Flush Pulls Pulls Flexible
EW PPOOU C AMIL
Part Number Part Number 4.72 [120.0] 120.0 - 4.72 3.78 [96.0] 96.0 3.78
1.69 43.0 .079 2.00 THK.
.24 6.0
A
Material Material
Finish Finish
94-01 94-01
rubber rubber
beige beige
94BK-01 94BK-01
rubber rubber
black black
snapsinto intoplace place and and fasteners fasteners are I snaps are not not required required
r;-
2.52 64.0
I
2.28 [58.0] 58.0 2.28
30.0 1.18 1.18 [30.0]
4.17 [106.0] 106.0 4.17
A
.079 [2.00] 2.00 .079 GAP PANEL GAP FOR FOR PANEL
3.62 [92.0] 92.0 3.82
1.54 39.0 1.54 [39.0]
1.06 2
SECTION A-A SECTION A-A
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Flexible Flush Flush Pulls Pulls Flexible Part Number Part Number 3.15 [80.0] 80.0 3.15
1.46 37.0
2.60 [88.0] 66.0 2.80 A
.079 [2.00] 2.00 .079 THK. THK
.12 3.0 .12[3.0]
Material Material
Finish
94-02 94-02
rubber rubber
beige beige
94BK-02 94BK-02
rubber rubber
black black
snapsinto intoplace place and and fasteners fasteners are I snaps are not not required required 2.05 [52.0] 52.0 2.05 1.57 40.0 1.57 [40.0]
.87 22.00] 87 [22
4.17 106.0
1.54 39.0
A 2.44 [82.0] 62.0 2.44
SECTION A-A
Download Download Ornoor @@www.spep.com www.spep.com
.91 23.0
1.06 27.0 1.06 [27.0] .079 [2.00] 2.00 .079 GAP PANEL GAP FOR FOR PANEL
MOUNTING DIMENSIONS
10 10
2.64 [67.0] 67.0 2.64
MOU
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges ans and Industrial Hardwire Hines 1---1..ctrial Hardware
Material Material
Finish I Finish
•
94-03 94-03
rubber rubber
beige beige
94BK-03 94BK-03
rubber rubber
black black
2.17 55.0 A
snapsinto intoplace placeand and fasteners fasteners are I snaps are not not required required
1.18 30.0
1.69 43.0
.079 2.00 THK.
.16 4.0 .16[4.0]
11111114
1.57 40.0
0
47.0 1.85 [47.0]
1.34 34.0
.71 18.0
23.0 .91 [23.0]
A
2.00 .079 [2.00] GAP GAP FOR FOR PANEL PANEL
1.54 39.0
SECTION A-A
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
MENSIONS
Pulls & Knobs
Flexible Flush Flush Pulls Pulls Flexible Part Number Part Number
Concealed Pull Pull Assembly Concealed Assembly Part Number
Material Material
Finish Finish
glass glass reinforced reinforced plastic plastic
91-01 91-01
.0 +.00 .63 - .02 16.0-.5
black black
.81 20.6
1.31 33.4 1.31 [33.4]
1.12 [28.3] 28.3 1.12
flush mounting for up up to to.25 .25 [6.35] [6.35] door ►flush mounting for door thickness thickness +.04
+1.0
2.68 68.1] 68.1 2.68
3.18 80.8] 80.8 3.18
76.0 .0 2.99 - .00 2.9934 0 76.011
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW VIEW FRONT
Aluminum Concealed Concealed Pull Pull Assembly Assembly Aluminum Part Number
91-02 91-02
Material Handle
Housing
die cast cast die zinc zinc
plastic plastic
Finish IS
.83 21.0
.0 +.00 16.0-.5 .63 - .02[16.0_ .63.02
1.63[41.4] 41.4 - 1.63
1.13 [28.7] 28.7 1.13
1 1
black black
95.0 3.74 95.0] 3.74
4.21 106.9
+.04 +1.0 4.02 102.0 .0 0+!9°]
- .00 4 °2+-.88[
..1
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
FRONT VIEW FRONT VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
Mi
ConcealedPull PullAssembly Assembly k Concealed
Part Number Part Number
Material Material
Finish Finish
91-03 91-03
die cast die cast zinc zinc
grey grey powder powder coated coated
91-03BK 91-03BK
die cast die cast zinc zinc
black black powder powder coated coated
2.85 [72.5] 72.5 2.85
1.52 38.5 1.52[38.5] .79 [20.0] [20.0] .79
3.31 [84.0] 84.0 . 3.31
.08 2.0 .08[2.0]
3.31 84.0] 84.0 3.31
3.94 [100.0] 3.94 [ 00.0]
I
1 .66 [16.8] 16.8 .66
.29 7.3 V0.29[7.3] (2) PLCS.
MOUNTING DIMENSIONS
Request Info
1-800-453-1692 www.aboveboardelectronics.com
180 ° HANDLE 180 HANDLE ROTATION
FRONT VIEW VIEW
M4 xx .32 LONG M4 .32 [[ 8.0 8.0]] LONG (2) SCREWS SCREWS (2)
RIGHT SIDE VIEW VIEW
To Place 800.433.5554 MN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
11 11
Pulls & Knobs
..." M"
_" ."C ENGINEERING
----DUCTS
Small Small Aluminum Aluminum Extruded Extruded Pulls Pulls
C
Part Part Number Number .25 6.4 .25 [6.4] TYP.
KNURLS
9910 9910 9910BK 9910BK
1.37 [34.9] 34.9 1.37
1.12 [28.5] 28.5 1.12 CENT. CENT.
(2) THREADED THREADED HOLES (2) HOLES SEE PART PART NO. NO. TABLE TABLE SEE .38 .38 [[ 9.5] 9.5] DEEP DEEP
1.06 27.0
Thread Thread
Finish Finish
8-32 8-32
clear clear matte matte anodized anodized
8-32 8-32
black black anodized anodized
9911 9911
M4 xx .7 M4 .7
clear clear matte matte anodized anodized
9911BK 9911 BK
M4 xx .7 M4 .7
black black anodized anodized
material: aluminum aluminum I material:
Medium Medium Aluminum Aluminum Extruded Extruded Pulls Pulls Part Part Number Number .26 6.5 .26 [6.5] TYP. TYP.
KNURLS
1.12 28.5 1.12 [28.5] 2.50 [63.5] 63.5 2.50
Thread Thread
Finish Finish
9912 9912
8-32 8-32
clear clear matte matte anodized anodized
9912BK 9912BK
8-32 8-32
black black anodized anodized
9913 9913
M4 xx .7 M4 .7
clear clear matte matte anodized anodized
9913BK 9913BK
M4 xx .7 M4 .7
black black anodized anodized
material: aluminum aluminum I material: 1.12 28.5 1.12 [28.5]
(3) THREADED HOLES (3) THREADED HOLES SEE PART NO. NO. TABLE TABLE SEE PART .38 .38 [[ 9.5] 9.5] DEEP DEEP
1.06 27.0
Large Large Aluminum Aluminum Extruded Extruded Pulls Pulls Part Part Number Number
1
KNURLS KNURLS
.25 [6.4] 6.4 .25 TYP. TYP.
1.12 28.5 1.12[28.5]
Thread Thread
Finish Finish
9914 9914
8-32 8-32
clear clear matte matte anodized anodized
9914BK 9914BK
8-32 8-32
black black anodized anodized
9915 9915
M4 xx .7 M4 .7
clear clear matte matte anodized anodized
9915BK 9915BK
M4 xx .7 M4 .7
black black anodized anodized
material: aluminum aluminum I material: 3.39 [86.0] 86.0 3.39 2.00 [50.8] 50.8 2.00
(3) THREADED HOLES 3) THREADED HOLES SEE PART PART NO. NO. TABLE TABLE SEE .38 [[ 9.5] .38 9.5] DEEP DEEP
1.06 [27.0] 27.0 1.06
Extra Extra Large Large Aluminum Aluminum Extruded Extruded Pulls Pulls Part Part Number Number KNURLS
.25 6.4 .25 [6.4] TYP. TYP.
1.12 28.5 1.12 [28.5]
Thread Thread
Finish Finish
9916 9916
8-32 8-32
clear clear matte matte anodized anodized
9916BK 9916BK
8-32 8-32
black black anodized anodized
9917 9917
M4 xx .7 M4 .7
clear clear matte matte anodized anodized
9917BK 9917BK
M4 xx .7 M4 .7
black black anodized anodized
material: aluminum aluminum I material: 4.13 105.0 4.13 [105.0]
2.76 [70.0] 70.0 2.76
1.06 27.0
12 12
Download 3Dmour @@www.spep.com Download www.spep.com
(3) THREADED HOLES 3) THREADED HOLES SEE PART NO. NO. TABLE TABLE SEE PART .38 .38 [[ 9.5] 9.5] DEEP DEEP
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges ind Industrial Industrial Hardware Hardwire
976 976
Material Material
Finish Finish
die zinc die cast cast zinc
polished polished chrome chrome plated plated
H
.82 20.8 .82[20.8] 1
8-32 THREAD THREAD xx 8-32 .41 [10.4] [10.4] DEEP DEEP .41 (2) PLACES PLACES (2)
Pulls & Knobs
Die Cast Zinc Zinc Pull Die Cast Pull Part Part Number Number
RD
4.00 101.6 4.00[101.6]
0 Cr
.42 10.7
Die Cast Zinc Die Cast Zinc Pulls Pulls Part Part Number Number
Finish Finish
CC CC
997 997
satin satin chrome chrome plated plated
3.15 [80.0] [80.0] 3.15
997BK 997BK
black black painted painted
3.15 [80.0] [80.0] 3.15
997-01 997-01
satin satin chrome chrome plated plated
5.12 5.12 [130.0] [130.0]
997BK-01 997BK-01
black black painted painted
5.12 5.12 [130.0] [130.0]
997-02 997-02
satin satin chrome chrome plated plated
7.09 7.09 [180.1] [180.1]
997BK-02 997BK-02
black black painted painted
7.09 7.09 [180.1] [180.1]
1.42 36.0 1.42[36.0]
M5 THREAD THREAD xx M5 .47 [12.0] [12.0] DEEP DEEP .47 (2) PLACES PLACES (2)
CC CC
.47 12.0 .47[12.0]
material: die die cast cast zinc zinc I material:
Steel, Chrome Plated Plated Wire Wire Handles Steel, Chrome Handles Part Part Number Number
CC CC
935-01 935-01
3.54 [90.0] [90.0] 3.54
935-02 935-02
3.94 [100.0] 3.94 [100.0]
935-03 935-03
4.69 [119.0] [119.0] 4.69
935-04 935-04
5.32 [135.0] 532 [135.0]
935-05 935-05
5.87 5.87 [149.0] [149.0]
935-06 935-06
6.10 [155.0] 6.10 [155.0]
935-07 935-07
6.30 [160.0] [160.0] 630
ri=7 1
mio
M10 THD. (2) PLACES
,.„,„
..---"-H 90° 90° , ---N ROTATION ROTATION
.35 [9.0] 9.0 0.35
J
1.28 32.5 1.28 [32.5]
I
.63 [16.0] 16.0 .63
material: steel steel I material: finish: chrome I finish: chrome plated plated (2) chrome chrome plated washers I (2) plated washers (2) chrome chrome plated I (2) plated nuts nuts
CC CC
.63 [16.0] 16.0 0.63
FRONT VIEW VIEW FRONT
-j
RIGHT SIDE SIDE VIEW RIGHT VIEW
Steel, Black Black Powder Powder Coated Coated Wire Wire Handle Steel, Handle Part Number er
933 933
CC CC
0
4.00 [101.6] [101.6] 4.00
material: steel steel I material: finish: black I finish: black powder powder coated coated (2) black black powder I (2) powder coated coated nuts nuts
.26 [6.5] 6.5 0.26
M6 THD. ) THD. (2) PLACES
II
90°
0
90°
1.25 [31.7] 31.7 125
13.5 .53 [13.5]
CC CC
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.43 11.0 0.93[11.0]
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
13 13
Pulls & Knobs
a"-"N"I PACIFIC EN
AND PRODUCTS
Stainless SteelWire Wire Pulls Stainless Steel Pulls B
D
CC CC
Part Number: 9035SS-01W Part Number. 903555-01W 0 For [4.00] Pull Pull For Ø.157 0.157 [4.00]
CC CC A A
D
A A
B
D
9035SS-01 903555-01
.787 [20.00] [20.00] .787
Ø.157 [4.00] 0.157 [4.00]
.86 [22.0] [22.0] .86
M2.6 THD. M2.6 THD.
9035SS-02 903555-02
1.574 [40.00] 1.574 [40.00]
Ø.236 [6.00] 0.236 [6.00]
.86 [22.0] [22.0] .86
M4 THD. M4THD.
9035SS-04 903555-04
3.149 [80.00] 3.149 [80.00]
Ø.236 [6.00] 0.236 [6.00]
.27 [7.0] [7.0] .27
M4 THD. M4THD.
Part Part Number: Number: 9035SS-02W 903555-02W For [6.00] Pull Pull For Ø.236 0.236 [6.00]
B
D
CC CC
material: 303SS 303SS I material: finish: polished I finish: polished
A A
Pull Pull Bases Bases
Part Part Number Number
", ,
Part Part Number Number
CC CC
A A
B
D
9036SS-01 903655-01
.787 [20.00] [20.00] .787
Ø.157 [4.00] 0.157 [4.00]
.86 [22.0] [22.0] .86
M2.6 THD. M2.6 THD.
9036SS-02 903655-02
1.574 [40.00] 1.574 [40.00]
Ø.236 [6.00] 0.236 [6.00]
.86 [22.0] [22.0] .86
M4 THD. M4THD.
9036SS-04 903655-04
3.149 [80.00] 3.149 [80.00]
Ø.236 [6.00] 0.236 [6.00]
1.18 [30.0] [30.0] 1.18
M4 THD. M4 THD.
Brass Brass Wire Wire Pulls Pulls Brass Brass Wire Wire Pulls Pulls Part Part Number Number
1.31 33.3 1.303.31 .315 8.00 ] .315[8.00
CC CC
Material Material
951 951
3.00 [76.2] 3.00 [76.2]
solid brass solid brass
941 941*
3.50 [88.9] [88.9] 3.50
solid brass solid brass
948 948
4.00 [101.6] [101.6] 4.00
solid brass solid brass
Finish FiniM polished & polished & lacquered lacquered
non-stock * non-stock
Chrome Plated Plated Wire Wire Pulls Chrome Pulls
8-32 THD. THD. xx 8-32 .24 [6.0] DEEP DEEP .24 [6.0] (2) PLACES (2) PLACES
CC CC
Part Part Number Number
CC CC
Material Material
3.00 [76.2] 3.00 [76.2]
solid brass solid brass
940 940
3.50 [88.9] 3.50 [88.9]
solid brass solid brass
944 944
4.00 [101.6] 4.00 [101.6]
solid brass solid brass
952 952
(0)
Finish Finish chrome chrome plated plated
Satin Aluminum Wire Wire Pulls Satin Aluminum Pulls Part Part Number Number 1.32 33.5 1.32[33.5] .315 8.00 0.315[8.00]
CC
8-32 TH THD. x D. x 8-: .58 [14.7] DEEP
CC CC
Material Material
Finish Finish
953 953
3.00 [76.2] [76.2] 3.00
aluminum aluminum
942 942
3.50 [88.9] [88.9] 3.50
aluminum aluminum
946 946
4.00 [101.6] [101.6] 4.00
aluminum aluminum
CC CC
Material Material
Finish Finish
939 939
5.00 [127.0] [127.0] 5.00
aluminum aluminum
939-01 939-01
8.84 [224.5] [224.5] 8.84
aluminum aluminum
satin white satin white anodized anodized
CC CC
Material Material
Finish Finish
solid brass solid brass
polished polished chrome chrome plated plated
satin satin aluminum aluminum
.513 [14.7] DEEP (2) PLACES PLACEs
(0(-
Satin White Aluminum Aluminum Wire Wire Pulls Satin White Pulls Part Part Number Number 1.38 34.9 1.38[39.9] 9.60 -OM.378 [Sfl] 9.30 .366
CC
4Y -
8-32 THREAD THREAD xx 8.32 .69 [17.51 [17.5] DEEP DEEP .89 (2) PLACES (2) PLACES
non-stock * non-stock
Tall Brass Tall Brass Wire Wire Pull Pull Part Number
11.111011116 1.50 38.1] 38.1 1.50 .375 9.53 03.375[9.53]
Download 3DmoDEts @ www.spep.com Download @ www.spep.com
5.00 [127.0] [127.0] 5.00
non-stock * non-stock CC CC
14 14
954-01 * 954-01
8-32 I R EAD x 8 -32 THREAD .50 SO [12.7] [12.7[ DEEP DEEP (2)) PLACES /LA P cES (2
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware Hinges and Indr•"I Hardwire
945 945
CC
Material Material
Finish Finish
3.90 [99.1] [99.1] 3.90
304SS 304SS
mill mill
I this this handle handle has has no no mounting mounting holes holes
1.19 30.2 .31 [7.9] 7.9 -.31
3.90 [99.0] 99.0 3.90
C+)
Wire Pulls Pulls Wire Part Part Number Number
903BK 903BK
CC CC
Material Material
Finish Finish
Thread Thread Size Size
aluminum aluminum
black black anodized anodized
8-32 8-32
Pulls & Knobs
Stainless Stainless Steel Steel Wire Wire Pull Pull Part Part Number Number
1.18 [30.00] [30.00] 1.18
904BK 904BK
2.52 [64.00] 2.52 [64.00]
905BK 905BK
3.78 [96.00] [96.00] 3.78
906BK 906BK
5.04 [128.00] 5.04 [128.00]
903BK-01 903BK-01
1.18 [30.00] [30.00] 1.18
904BK-01 904BK-01
2.52 [64.00] 2.52 [64.00]
905BK-01 905BK-01
3.78 [96.00] [96.00] 3.78
906BK-01 906BK-01
5.04 [128.00] 5.04 [128.00]
903 903
1.18 [30.00] [30.00] 1.18
904 904
2.52 [64.00] 2.52 [64.00]
905 905
3.78 [96.00] [96.00] 3.78
906 906
5.04 [128.00] 5.04 [128.00]
903-01 903-01
1.18 [30.00] [30.00] 1.18
904-01 904-01
2.52 [64.00] 2.52 [64.00]
905-01 905-01
3.78 [96.00] [96.00] 3.78
906-01 906-01
5.04 [128.00] 5.04 [128.00]
903CH 903CH
1.18 [30.00] [30.00] 1.18
904CH 904CH
2.52 [64.00] 2.52 [64.00]
905CH 905CH
3.78 [96.00] [96.00] 3.78
906CH 906CH
5.04 [128.00] 5.04 [128.00]
903CH-01 903CH-01
1.18 [30.00] [30.00] 1.18
904CH-01 904CH-01
2.52 [64.00] 2.52 [64.00]
905CH-01 905CH-01
3.78 [96.00] [96.00] 3.78
906CH-01 906CH-01
5.04 [128.00] 5.04 [128.00]
903ZN 903ZN
1.18 [30.00] [30.00] 1.18
904ZN 904ZN
2.52 [64.00] 2.52 [64.00]
905ZN 905ZN
3.78 [96.00] [96.00] 3.78
906ZN 906ZN
5.04 [128.00] 5.04 [128.00]
903ZN-01 903ZN-01
1.18 [30.00] [30.00] 1.18
904ZN-01 904ZN-01
2.52 [64.00] 2.52 [64.00]
905ZN-01 905ZN-01
3.78 [96.00] [96.00] 3.78
906ZN-01 906ZN-01
5.04 [128.00] 5.04 [128.00]
903SS 90355
1.18 [30.00] [30.00] 1.18
904SS 90455
2.52 [64.00] 2.52 [64.00]
905SS 90555
3.78 [96.00] [96.00] 3.78
906SS 90655
5.04 [128.00] 5.04 [128.00]
903SS-01 90355-01
1.18 [30.00] [30.00] 1.18
904SS-01 90455-01
2.52 [64.00] 2.52 [64.00]
905SS-01 90555-01
3.78 [96.00] [96.00] 3.78
906SS-01 90655-01
5.04 [128.00] 5.04 [128.00]
Request Info
31.00] 11.22 22[31 .315 8.00 0.315[8.00]
(2) THREADED HOLES HOLES .39 [10.0] [10.0] DEEP .39 DEEP
CC CC
SEE PART PART NO. NO. TABLE TABLE SEE
aluminum aluminum
black black anodized anodized
M4 X 0.7 M4 X 0.7
aluminum aluminum
clear clear anodized anodized
8-32 8-32
aluminum aluminum
clear clear anodized anodized
M4 X 0.7 M4 X 0.7
steel steel
chrome chrome plated plated
8-32 8-32
steel steel
chrome chrome plated plated
M4 X 0.7 M4 X 0.7
steel steel
zinc plated zinc plated
8-32 8-32
steel steel
zinc plated zinc plated
M4 X 0.7 M4 X 0.7
304SS 304SS
passivated passivated
8-32 8-32
304SS 304SS
passivated passivated
M4 X 0.7 M4 X 0.7
1-800-453-1692 www.aboveboardelectronics.com
061
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
15 15
Pulls & Knobs
..."M"
_" ."C ENGINEERING
----DUCTS
Small Extruded Pulls Pulls Small Aluminum Aluminum Extruded Part Number Part Number
C
2.36 60.0 2.36[60.0]
.59 15.0 .59[15.0]
M8 THREAD THREAD xx M8 .71 [18.0] .71 [18.0] DEEP DEEP (2) PLACES PLACES (2)
CC CC
5.04 [128.0] 5.04 [128.0]
966BK-01 966BK-01
5.91 [150.0] 5.91 [150.0]
966BK-02 966BK-02
7.56 [192.0] 7.56 [192.0]
material: aluminum aluminum I material: finish: black black powder powder coated coated I finish:
TOP VIEW TOP VIEW
O
CC CC
966BK 966BK
.98 24.9 .98[24.9] BOTTOM VIEW BOTTOM VIEW
Large Aluminum Extruded Pulls Pulls Large Aluminum Extruded Part Number Part Number
CC CC
967BK 967BK .79 20.0 .79[20.0]
2.76 70.0 2.76[70.0]
TOP VIEW TOP VIEW M8 THREAD THREAD xx M8 .71 [18.0] [18.0] DEEP .71 DEEP (2) PLACES PLACES (2)
CC CC
9.84 [250.0] 9.84 [250.0]
967BK-01 967BK-01
11.81 11.81 [300.0] [300.0]
967BK-02 967BK-02
15.75 [400.0] 15.75 [400.0]
967BK-03 967BK-03
19.69 19.69 [500.0] [500.0]
967BK-04 967BK-04
23.62 [600.0] 23.62 [600.0]
material: aluminum aluminum I material: finish:black black powder powder coated coated I finish:
L 1.38[35.0 1.38 35.0 ] BOTTOM VIEW VIEW BOTTOM
Aluminum Pulls Pulls Aluminum Part Part Number Number .99 25.2 .99[25.2]
8-32 THREAD x .35 [9.0] DEEP (2) PLACES
4.00 101.6 4.00[101.6]
Material Material
Finish Finish
960 960
solid brushed, solid brushed, aluminum lacquered lacquered aluminum
960BK 960BK
matte matte black solid solid black powder aluminum powder aluminum coated coated
.50 12.7 .50[12.7]
Die Cast Cast Zinc Die Zinc Pull Pull
.79 20.1 .79[20.1]
r
I 8-32 THREAD 8-32 THREAD xx .32 [8.0] DEEP .32 [8.0] DEEP (2) PLACES PLACES (2)
.35 9.0 .35] 9.0]
16 16
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
Part Part Number Number
Material Material
Finish Finish
975 975
die cast die cast zinc zinc
polished polished chrome chrome plated plated
2.75 69.9 2.75[69.9]
[
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges and Industrial industrial H,---"-ire
Material Material
Finish Finish
steel steel
zinc plated zinc plated
Formed Formed Pull Pull
5.00 127.0
1.50 38.1
1.00 25.4
.203 5.16 HOLE (4) PLCS.
Pulls & Knobs
Part Number Part Number
920-04 920-04
co
1.35 34.2 1.35[34.2]
Formed Pulls Pulls Formed Part Part Number Number
A A
Material Material
Finish Finish
none none
steel steel
mill mill
920-01 920-01
Ø.250 0.250 [6.35] [635] (2) (2) holes holes
steel steel
mill mill
920-02 920-02
.312 [7.92] x x 312 [7.92] .218 [5.54] [5.54] .218 (2) (2) obrounds obrounds
steel steel
mill mill
920 920
921 921
5.25 133.4 5.25[133.4]
1.53 38.9 1.53[38.9]
none none
304SS 304SS
electropolished electropolished
921-01 921-01
.312 [7.92] x x 312 [7.92] .218 [5.54] [5.54] .218 (2) (2) obrounds obrounds
304SS 304SS
electropolished electropolished
922 922
Ø.161 [4.09] 0.161 [4.09] (4) (4) holes holes
steel steel
mill mill
924 924
Ø.161 [4.09] 0.161 [4.09] (4) (4) holes holes
steel steel
nickel plated nickel plated
A
1.37 34.8 ] 1.37[34.8
Formed Pull Formed Pull Part Number Part Number
911ZN 911ZN
Material Material
Finish Finish
steel steel
zinc plated zinc plated
4.11 104.33] 4 11[104
.68 17.3 0.88[17.3] .18 4.5 HOLE HOLE WITH 0.18[4.5] MTH .34 [8.5] [8.5] xx 90 90 ° C'SINK MINK 0.34 (2) PLACES PLACES (2)
1.20 30.5 120]30.5]
.28 7.2 28[7.2])
Formed Pulls Pulls Formed
I
Material Material
Finish Finish
914 914
Part Number Part Number
steel steel
zinc plated zinc plated
915 915
steel steel
brass brass plated, plated, lacquered lacquered
4.13 104.8 4.13[104.8]
.70 17.8 .70[17.8] C'SUNK FOR C'SUNK FOR A A #7 #7 OVAL OVAL HEAD HEAD SCREW SCREW (2) PLACES PLACES (2)
1.02 25.9 1.02[25.9]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
17
ilr•W BIM NEM l'alrin1
Pulls & Knobs
niENGINEERING AND PRODUCTS
Formed Pulls Pulls Formed Part Part Number Number
O C
J3126 J3126
Finish Finish mill mill
304SS 304SS
mill mill
J3126SS J312655
.281 [7.14] 7.14 0.281 (2) HOLES HOLES (2)
4.75 [120.7] 120.7 4.75
Material Material galvanized steel galvanized steel
TOP VIEW TOP VIEW R1.00 25.41 25.4 R1.00
A
3
.99 25.2 .99[25.2]
A 3.53 89.7 CENT.
314[97.]
.75 .75 [ 19.1 19.1]
SECTION A-A SECTION A-A
FRONT FRONT VIEW VIEW
Formed Pulls Pulls Formed
O
1.80 45.66] 1 80[45
Material Material
Finish Finish
Hole Hole Size Size
917 917
steel steel
zinc plated zinc plated
Ø .2190 0.2190 [5.563] [5.563]
917SS 91755
304SS 304SS
electropolished electropolished
Ø .2190 0.2190 [5.563] [5.563]
928BK 928BK
steel steel
black black powder powder coated coated
Ø .252 0.252 [6.40] [6.40]
Part Part Number Number
5.55 140.9 5.55[140.9]
.95 24.2 95[24.2] C'SUNK FOR FOR CSUNK A #8 #8 F.HS. F.H.S. A (4) PLACES (4) PLACES
1.37 34.88] 1 37T4
Formed Pulls Pulls Formed
II I Part Number Material Part Number Material
7.00 177.8 7.00[177.8]
.midall&:=0:
1.95 49.5 1.95[49.5]
1.00 25.44] 1 00[25
steel steel
983SS 98355
304SS 304SS
electropolished electropolished
304SS 304SS
electropolished electropolished then then hand polished hand polished
983SS-01 98355-01
C'SUNK FOR FOR CSUNK A #12 #12 F.H.S. F.H.S. A (4) (4) PLACES PLACES
Finish Finish
983 983
chrome chrome plated plated
1.80 45.7 1.80[45.7]
Die Cast Cast Zinc Die Zinc Pull Pull Part Number Part Number 6.95 176.5 6.95[176.5]
983DC 983DC
Material Material
Finish Finish
die cast zinc die cast zinc
chrome chrome plated plated
Material Material
Finish Finish
die cast zinc die cast zinc
chrome chrome plated plated
.99 25.2 .99[25.2]
CD
.315 8.00 THRU. THRU.HOLE HOLE WITH WITH 0.315[8.00] .531 [13.50] [13.50] xx 90 90° CSUNK C'SINK 0 .531
(4) PLACES PLACES (4)
.51 13.0 .51[13.0])
1.21 30.8 1.21[30.8]
Jr
17-1-(
Die Cast Cast Offset Die Offset Pull Pull Part Number Part Number
988CH 988CH 1.69 43.0 1.69[43.0]
1/4-20 THD. 1/4-20 TH D. xx .75 [19.0] [19.0] DEEP .75 DEEP (2) PLACES (2) PLACES
12.3 L.49 49[12.3]
5.00 127.0 5.00[127.0]
.67 17.0 1.48 37.5 1.48[37.5]
18 18
Download www.spep.com Download3DmoDELs @ @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and and Industrial industrial Hardware Hardware
969 969
Material
Finish
TPE TPE
smooth smooth
corematerial: material: steel steel I core capsmaterial: material:TPE TPE I caps includesscrew screw caps caps I includes UV resistant resistant I UV
6.30 160.0 8.30[180.0]
A
A
1.18 30.0 IL 1.1630.0] .330 8.38 HOLE HOLE WITH WITH 0.330[838] .656 [16.66] [9.4] DEEP C'BORE CBORE 0.858 6.66] xx .37 .37 [AA] (2) PLCS.
7.48 190.0 7.48[190.0]
POLYURETHANE HANDLE OVERMOLD STEEL STAMPING CORE
/ 1.97 [504 50.0 197
Pulls & Knobs
GrabHandle Handlewith withSteel Steel Core Core cj Grab Part No. Part No.
.71 18.0 4 .7118,1)] 4 11111111 1.-
SECTION A-A SECTION AA
Plastic Pull Plastic Pull Part No. Part No.
989BK 989BK 989BK-02 4.09 989BK-02
Holes Holes
Material Material
Finish Finish
hex hex
reinforced reinforced nylon nylon
black black textured textured
c’sunk c'sunk
reinforced reinforced nylon nylon
4.81 [122.2] 122.2 4.81
A r
1.00 ,35.4] 25.4 1.00
black black textured textured
.266 [6.76] 6.76 0.266 (2) HOLES
A A
B
B
.422 10.72 .422[10.72] HEX HD( .504 12.80 0.504[12.80] (2) C'SINKS (2) CSINKS
.522 [13.26] 13.26 0.522 (2) PLACES PLACES (2)
.266 6.76 0.266[6.76] (2) HOLES (2) HOLES
TOP VIEW W
TOP VIEW VIEW TOP
C'SUNK HOLES C ILTiricvI E0 E
5.55 [141.0] 141.0 5.55
90° 901
1.64 41.7] 41.7 1.64[
I1 .48 12.2 .48 [12.2]
.25 6.4 DEEP DEEP .25[6.4] (2) PLACES PLACES (2)
3.77 95.7 3.77[95.7] CENT. CENT.
SECTION B-B SECTION BB
SECTION A-A SECTKIN A-A
Part Part Number Number
989BK10 989BK10
Material Material glass glass reinforced reinforced plastic plastic
C'SUNK HOLES HOLES CSUNK
40
Finish Finis black black textured textured
Plastic Pull Pull Plastic
5.91 [150.0] 150.0 5.91 A A
A A
1.10 28.0 1.10[28.0]
.244 [6.20] 6.20 0 .244
.402 [10.20] 10.20 .402 HEX. NBC
.512 [13.00] 13.00 0 .512
(2) HOLES (2) HOLES
(2) PLACES (2) PLACES
TOP T 11 VIEW /1EW
6.59 [187.5] 167.5 8.59
2.11 53.5 2.11[53.5]
.25 6.4 DEEP DEEP .25[8.4] (2) PLACES (2) PLACES
.37 [9.3] 9.3 .37
/31 14 118.5 4.67 [118.5] 4.67 CENT. CENT.
.48 [12.2] 12.2 .48
SECTION A-A
Plastic Pull Part Part Number Number
990BK 990BK
Material
Finish
plastic plastic
black black
CAP
'go"VN
NAJ . HANDLE
1.93 46 49.0 1.931 .0
.71 18.0
!%mm 5.12 130.0 5.12[13co] SECTION A-A SECTION AA
6.5 0 .256 355[6.5]
HOLE
23.0 u.91 [23.0]
A
.650[16.51] .650[16.51) x .256 6.5 x256[69] OBROUND
A BOTTOM BOTTOM VIEW VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
19 19
Pulls & Knobs
'wm" -MCIFIC
ENGINEERING AND PRODUCTS
Plastic Pull Plastic Pull Part Part Number Number
Material Material
Finish Finish
plastic plastic
black black
Material Material
Finish Finish
plastic plastic
black black
Material Material
Finish Finish
plastic plastic
black black
964P 964P
6.26 [159.0] 159.0 6.26 A
A
1.44 36.5
TOP VIEW TOP VIEW
.51 13.0 .51 [13.0]
2.17 [55.0] 55.0 2.17
M8 THREAD MS THREAD (2) INCERTS INCERTS (2)
5.12 130.0 5.12 [130.0]
SECTION A-A SECTION A-A
Plastic Pull Plastic Pull Part Part Number Number
d
964P-01 964P-01
immi 1.58 40.2 1.58[40.2] 24.3 .96 [24.3] .31 8.0
SECTION A-A A-A
A
5.12 [130.0] 130.0 5.12
-!\
I A
M5 THD. MS THD. INSERTS INSERTS (2) PLCS. PLCS. (2)
Snap-in Plastic Pull Snap-in Plastic Pull Part Part Number Number
963P 963P
panelthickness: thickness: 1.2 1.2 --1.6 1.6 I panel 112.0 4.41 [112.0]
40.0 1.57 [40.0]
12.0 .47 [12.0]
10.6 .42 [10.6] 9.9 H- ø.39 39991
3.94 .01 [100.0-1.3] 100.0 .3 3.94±.01
3.94 100.0 3.94 [100.0]
+.01
(+•\
24.0 .94 [24.0] 15.6 .62 [15.6] .62
16.0 .63 [16.0]
+.01
+.3
.39 - .00 10.0 .0 '°1[10.0÷•81 _{.39÷•°° -
+.01 +.3 .51 - .00 13.0+.1 '51- .00 Ll 3•° 0.0 j
+.3
10.00 ..394 394-- .00 .00 [1000÷ .0 •.01
MOUNTING DIMENSIONS
20 20
Download Download 3Dmour @@www.spep.com www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware ind Industrial inch P-rdware
Part Number Part Number
Finish Finish
985 985
smooth, white smooth, white
985BK 985BK
smooth, black smooth, black
8.00 203.2 9.90[9997] CENT. CEN,
Pulls & Knobs
Impact Resistant Plastic Plastic Grab Impact Resistant Grab Handles Handles
RD
1.19 30.2
C'SUNK FOR CSUNK A #10 RHO. F.H.S. SNIP (2) P PLACES LACES
O
Cr
1.50 38.1
I
Part Number Part Number
Q
Finish Finish
982BK 982BK
Plastic Grab Plastic Grab Handles Handles
9.25 [235.0] 235.0 9.25 7.75 196.9 7.75[198.9]
smooth, black black smooth,
982G 982G
smooth, gray gray smooth,
982W 982W
smooth, white smooth, white
1.00 25.4 1.00 [25.4]
r
.272 6.90 HOLE HOLE CAN ACCOMMODATE A CAN ACCOMMODATE A 0.272[8.90]
includes22screw screw covers covers I includes additionalcolors colorsavailable; available; I additional 1,000 piece 1,000 piece minimum minimum order order
1/4" PAN PAN HEAD HEAD SCREW SCREW WITH WITH .050[1.27] 0114" .050[1.27] THICK THICK WASHER WASHER (SCREW & WASHER NOT NOT INCLUDED) (SCREW 8 WASHER INCLUDED) TOP VIEW VIEW TOP
r
.50 12.6 .50[12.6]
SCREW COVER SCREW COVER (2) PIECES PIECES (2)
6=5 1.25 31.8 1.25 [31.8] .44 11.1 .44[11.1] (1
2.38 60.3 -.1=-1'1 \\\\ 2 t.38 [80.3]
1_L
FRONT VIEW VIEW FRONT
Assist Handles Assist Handles Part Number Part Number
Material Material
Finish Finish
aluminum aluminum
mill mill
987CH 987CH
steel steel
chrome plated chrome plated
987SS 98755
304SS 304SS
lightly polished lightly polished
987A 987A
El
12.13 308.0 12.19[908.0] 10.13 257.2 10.19[2572]
.75 19.1 .75[19.1]
0
oa C'SUNK A SUNK HOLES HOLES FOR FORA .250[6.35] [6.35]OR OR 914 #14 F.H.S. F.H.S. 0250 TOP VIEW TOP VIEW
.500 12.70 0.500[121011
2.00 50.8 2.00[50.8]
11 U
I FRONT VIEW
til
Heavy Duty Assist Assist Handles Heavy Duty Handles Part Part Number Number
Length A Length A
Length B B Length
Length C C Length
995A 995A
16.25 16.25 [412.8] [412.8]
12.00 12.00 [304.8] [304.8]
17.18 17.18 [436.4] [436.4]
996A 996A
22.75 22.75 [577.9] [577.9]
18.00 18.00 [457.2] [457.2]
23.68 23.68 [601.5] [601.5]
997A 997A
28.75 28.75 [730.3] [7303]
24.00 24.00 [609.6] [609.6]
29.75 29.75 [755.7] [755.7]
998A 998A
40.75 40.75 [1035.1 [1035.1
36.50 36.50 [927.1] [927.1]
41.68 41.68 [1058.7] [1058.7]
material: aluminum aluminum I material: finish: mill I finish: mill
.75 19.1
.75 19.1 73[133] A
.313 7.94 9[7.94] 09, (4) HOLES
TOP VIEW
.625 15.88 2.00 50.8 9.colso.91
B C
FFRONT 1.11 VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
21 21
Pulls & Knobs
amwm"...
a"."C ENGINEERING AND
Die Die Cast Cast Zinc Zinc Handles Handles with with Plastic Plastic Covers Covers Part Part Number Number
O C
A A FRONT-MOUNT FRONT-MOUNT
?
.335 8.50 THRU THRU HOLE HOLE WITH WITH .335[8.50) .630 [16.00] x .22[5.61 [5.6] DEEP DEEP C'BORE 01330 [1640[x.22 CBORE (2) PLACES PLACES (2)
TOP VIEW T COVER NOT NOT SHOWN SHOWN COVER FOR CLARITY FOR CLARITY
3
))
D
A A
B
C
D
E
991CH 991CH
10.47 10.47 [265.9] [265.9]
11.34 1134 [288.0] [288.0]
1.04 1.04 [26.4] [26.4]
1.75 1.75 [44.5] [44.5]
.87 .87 [22.1] [22.1]
991CH-01 991CH-01
8.50 8.50 [215.9] [215.9]
9.37 937 [238.0] [238.0]
1.04 1.04 [26.4] [26.4]
1.75 1.75 [44.5] [44.5]
.87 .87 [22.1] [22.1]
991CH-02 991CH-02
6.54 6.54 [166.1] [166.1]
7.40 7.40 [187.0] [187.0]
1.04 1.04 [26.4] [26.4]
1.75 1.75 [44.5] [44.5]
.87 .87 [22.1] [22.1]
992CH 992CH
12.84 12.84 [326.1] [326.1]
13.78 13.78 [350.0] [350.0]
1.57 1.57 [39.9] [39.9]
2.28 2.28 [57.9] [57.9]
.87 .87 [22.1] [22.1]
C FRONT VIEW FRONT VIEW
WITH COVER WITH COVER M8 MB THREAD THREAD xx .87 DEEP .87 [22.0] [224 DEEP (2) PLACES PLACES (2)
B
BLIND-MOUNT BLIND-MOUNT
covermaterial: material:ABS ABS I cover coverfinish: finish: black black I cover basematerial: material: die die cast cast zinc zinc I base basefinish: finish: chrome chrome plated plated (dull) (dull) I base
E BOTTOM VIEW BOTTOM VIEW
assembled assembled
unassembled unassembled
Variable Length Variable Length Pulls Pulls Part Description PartNumber Number Description .335 8.50 ] xx .433 .433 [11.00] [11.00] OBROUND OBROUND .335[8.50 WITH 35° 35° ANGLE ANGLE WALL WALL TO WITH TO MOUNT MOUNT SCREW SCREW AT AT AN AN ANGLE ANGLE
.520 13.20 .520[ 13.20 ] HEX HEX .28 [7.0] xx .28 [7.0] DEEP DEEP (2) PLACES PLACES (2) A
Material Material
Finish Finish
end end base base
plastic, plastic, glass glass reinforced reinforced
black black
968-01 968-01
center center base base
plastic, plastic, glass glass reinforced reinforced
black black
968-02 968-02
tube tube 30.0 [762.0] 30.0 [762.0]
steel steel
black black powder powder coat coat
968 968
A jA
.331 8.40 0.331[8.Q] (2) THRU THRU HOLES HOLES (2)
TOP VIEW TOP VIEW
.75 19.0 19.0 ] .75[
30.00 762.0 ] 30.00[762.0
2.36 60.0 2.36[60.0] TYP. TYP.
968-02 968-02
1.18 30.0 ] 01.18[30.0
968-01 968-01
eachcomponent componentisis sold sold separately separately I each tubecan canbe be cut cut to to desired desired length I tube length
968 968
SECTION A-A SECTION A-A
BBQ BBQElbow ElbowEscutcheon Escutcheon Part Part Number Number A
• 1111L.
4111 -1
D350 D350
j4
Material Material
Finish Finish
die cast zinc zinc & & die cast plastic plastic base base
chrome plated plated & & chrome black black base base
includes high high temperature temperature plastic plastic base I includes base that that prevents prevents the the transfer of transfer of heat heat onto onto the the handle handle for 1" 1" tubing I for tubing
•41110r ELBOW BASE BASE
+.25 +.010 1.020 - .000 25.91 .00
2.51 63.6 TOP TOP VIEW VIEW
1/4"-20 UNFC-2B UNFC-2B THD. x .500 [12.70] [12.70] DEEP DEEP 114^-20 THD. x.500 ON ON ELBOW ELBOW ONLY, ONLY, (2) (2) PLACES PLACES
.52 13.1 .52[13.1]-/.56 14.1 DEEP
.201 5.11 THRU THRU HOLE HOLE 0.201[5.11] ON ON BASE BASE ONLY ONLY (2) PLACES PLACES (2)
1.33 33.7 1.33[33.7] 1.89 47.9 01.89[47.9]
3.13 79.6 FRONT VIEW VIEW FRONT
22 22
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1.14 29.0 1.14[29.0] END VIEW VIEW END
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and and Industrial Industri-1 Hardware Hardware
2001900 2001900
Male Male Part Part Number Number
Finish Finish
a
2001902 2001902
mill mill
2001930 2001930
2001932 2001932
dull dull chrome chrome
2001940 2001940
2001942 2001942
satin brass satin brass
2001950 2001950
2001952 2001952
brass brass
2001960 2001960
2001962 2001962
chrome chrome
2001990 2001990
2001992 2001992
brushed brushed nickel nickel
1.13 28.7 1.13[28.7]
1.00 25.3 1.00[25.3]
Pulls & Knobs
Shower Shower Door Door Handles Handles Female Female Part Part Number Number
RD
male male part part
O
a.
3.50 3.50] 88.9 88.9
6-32 flat flat head head screws screws not included I 6-32 not included material: die die cast cast zinc zinc I material:
female part female part FEMALE FEMALE
MALE MALE
Patented Design Patented Design
.34 8.6 .34[ 8.6 ] STUD STUD ON MALE MALE PULL ON PULL
Catches Catches Nylon Striker Catch Catch Nylon Striker Part Number
Body
Striker
200170 200170
304SS nylon tumbled tumbled 304SS nylon
6-32 flat flat head head screws screws not included I 6-32 not included
Stainless Steel SteelStriker Striker Catch Catch Stainless Part Body PartNumber Number Body
200172 200172
Striker Striker
1.01 25.7 1.01[25.7] CENT. CENT.
Finish Finish
riqpn
.16 4.0
.31 7.9 .31[7.9] CENT. CENT.
Finish Finish
.50 12.7 .50[12.7]
TOP VIEW TOP
304SS 304SS tumbled tumbled 304SS 304SS .61 15.5 CENT. CENT.
6-32 flat head screws not included
.75 19.1 .75[19.1]
.48 12.3 A8[12.3]
,
1.37 34.9 1.37[34.9J
.031 .80 .031[.80]
FRONT VIEW VIEW FRONT
.97 24.5 .97[24.5] RIGHT SIDE RIGHT SIDE VIEW VIEW
Die Die Cast Cast Zinc Zinc Knobs Knobs Flat Flat Face Face
1.03 26.2
Part Part Number Number
39310BC---76 39310BC---76
.91 23.1
Finish Finish brushed brushed chrome chrome
8-32 THD. THD. xx 8-32 .43 [10.9] [10.9] DEEP .43 DEEP
Round Round Face Face Part Part Number Number
1.19 30.3
Finish Finish
Y70102CH Y70102CH
chrome chrome
Y70102GP Y70102GP
gold gold
8-32 THD. x 8-32 IND. x .68 [17.2] DEEP .68 [17.2] DEEP
Concave Face Face Concave
1.06 26.8 1.06[26.8]
Part Part Number Number
950 950
1.07 27.1
.64 16.3 .64] 16.3 ]
Finish Finish chrome plated chrome plated 8-32 THD. THD. xx 8-32 .40 [10.2] [10.2] DEEP .40 DEEP
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
23 23
Handles
SlEppf NEM MIN%
IGINEERING AND PRODUCTS
Hollow Hollow Chest Chest Handles Handles Part Part Number Number
C
1.00 25.4] 25.4 1.00
Finish Finish
CC CC
930 930
none none
mill mill
6.00 6.00 [152.4] [152.4]
932 932
Ø.192 [4.88] 0.192 [4.88] (4) (4) holes holes
mill mill
6.00 6.00 [152.4] [152.4]
934 934
none none
nickel nickel
6.00 6.00 [152.4] [152.4]
936 936
Ø.192 [4.88] 0.192 [4.88] (4) (4) holes holes
nickel nickel
5.75 5.75 [146.05] [146.05]
CO
CC
Holes Holes
1.50 38.1 1.50[38.1]
15.7 .62 .62[15.7] 1.25 31.9] 31.9 1.25
.025 [.64] [.64] thick I .025 thick steel steel
Chest Handles Chest Handles 3.63 92.2 9.0102.2] 2.00 50.8 2.00[50.8]
3.00 76.2 9.00[7172]
.262 6.65 WITH 711 054 76= FORMED . 82° C'SINK ,. . (4) PLACES
Part Part Number Number
Material Material
Finish Finish
20 20
.050 [1.27] .050 [1.27] steel steel plate plate
zinc plated zinc plated
20BK 20BK
.050 [1.27] .050 [1.27] steel steel plate plate
black black painted painted
2.00 me] 50.8
3.62 91.9 3.02[131.13]
.31 7.8 0.31[7.e] 2.75 69.9 2.75[09.9]
4 32)1C0 4.32 109.77]
Chest Handles Chest Handles Part Part Number Number
3.38 85.7 .193 4.90 (4) HOLES
1.44 36.5
1.77 45.0
1.06 27.0
2.9 73.7
Material Material
Finish Finish
21* 21*
.055 [1.40] .055 [1.40] steel steel plate plate
zinc plated zinc plated
2102 2102
.055 [1.40] .055 [1.40] steel steel plate plate
nickel nickel plated plated
*part no. no. 21 not have have red red PVC I *part 21 does does not PVC grip grip
2.25 57.2
PVCcoating coating on on / redred PVC part only part no. no. 2102 2102 only
.31 8.0 4.00 101.6
Chest Handle Chest Handle Part Part Number Number .193 4.90 (5) HOLES
3.38 85.7
2103CH 2103CH
1.44 36.5
Material Material
Finish Finish
.055 [1.40] [1.40] .055 steel plate steel plate
chrome chrome plated plated
.96 24.3
1.77 45.0 2.9 73.6
2.25 57.2 .31 8.0 4.00 101.6
Chest Handles Chest Handles .137 3.48 (4) PLCS.
Part Part Number Number
3.38 85.9 2.00 50.8
1.75 44.5
1.25 31.8
2.7 69.0
Material Material
Finish Finish
Holes Holes
24SSH 24SSH
.074 [1.88] [1.88] .074 304SS plate 304SS plate
electropolished electropolished
4 4
23 23
.059 [1.50] [1.50] .059 steel plate steel plate
mill mill
none none
.31 8.0 3.94 100.0
24 24
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industri -1 Hardware Hardware
Finish Finish
Mounting Mounting
29 29
steel steel
yellow zinc zinc yellow plated plated
(2) (2) slots slots
29-01 29-01
steel steel
yellow zinc yellow zinc plated plated
(3) (3) holes holes
29BK 29BK
steel steel
black black e-paint e-paint
(2) (2) slots slots
29SS01 295501
304SS 304SS
tumbled tumbled
(3) (3) holes holes
part part no. no. 29SS01 295501
Handles
Spring Spring Loaded Loaded Chest Chest Handles Handles Part Part Material Number Material Number
part part no. no. 29 29
spring loaded loaded bail bail I spring black rubber rubber grip grip I black 5.12 130.2
5.19 131.8 .206 5.22 (3) HOLES
.390 [9.91] x .198 5.03 (2) OBROUNDS
1.09 27.7
2.45 62.1
.26 6.6
1.70 43.2
1.70 43.2 .79 20.0
.059 1.50
1.13 28.6
2.40 61.0
.23 5.9
2.78 70.6 .73 18.5
.315 8.00
85° - 90°
.315 8.00
Spring Loaded Spring Loaded Chest Chest Handle Handle Part Part Number Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
25ZN 25ZN I spring spring loaded loaded bail bail black rubber rubber grip grip I black
5.63 143.0 5.69[149.0]
SPOT WELD WELD SPOT (5) PLACES PLACES (5)
3.51 [89.2] 89.2 3.51 CENT. CENT.
.61 [16.6] 15.5 .61 .079 [2.00] 2.00 .079
.85 21.5 1.23 [31.2] 31.2 123 CENT. CENT.
1.69 [43.0] 43.0 1.69
2.07 52.5
90° 80 ROTATION
.205 [5.20] 5.20 0.205 (5) HOLES HOLES (5)
4.13 105.0 CENT.
2.96 75.3
.73 18.5 0.73
5.12 [130.0] 130.0 5.12
.315 8.00
Spring Loaded Spring Loaded Chest Chest Handle Handle Part Number
22 22
Material Material
Finish
.060 [1.52] [1.52] .060 steel plate steel plate
zinc plated zinc plated
•
handleisis maintained maintained flush flush by by integrated spring I handle integrated spring
5.00 127.0 5.00[127.0] 2.50 63.5
.38[ 34.9 34.9]-..-4-1.38[ 1.38 1.38 34.9 34.9
1.52 38.6 1.52[38.6]
.313 7.94 WIRE 0.919[7.94]WIRE
3.51 89.2 3.51[89.2]
.198 [5.03] [5.03] 0.198 (3) HOLES HOLES (3)
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
25 25
Handles
a..."M" MNIIM"W".6
AND PRODUCTS
MediumRecessed Recessed Handles Medium Handles Part Number Part Number
155.7 6.13 [155.7]
.047 1.20 .047 [1.20] -1[.-
Material Material
Finish Finish
26 26
steel steel
zinc plated zinc plated
26-10BK 26-10BK
steel steel
black black powder powder coated coated
springloaded loaded bail bail I spring black rubber rubber grip I black grip
5.03 127.8 A
V
4.00 101.6 4.00[ 01.6]
3.00 76.2
7- I
5.03 127.8 R.36[127.8] 9.2
76.2 3.00 [76.2] R.36 9.2 [9.2]%
.193 [4.90] 4.90 0.193 (8) HOLES
<>
R.36 PANEL CUT-OUT
.30 [7.6] 7.6 .30
A V
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Medium Recessed Recessed Handle Medium Handle Part Number 6.33 160.8
.049 1.25 .049 [1.25] -1.-
Material
Finish Finish
steel steel
zinc plated zinc plated
27 27 springloaded loaded bail bail I spring black rubber rubber grip grip I black
5.03 127.8
I
4.25 108.0
3.00 76.2 5.03
127.8 5.03[127.8] R.36 9.2
76.2 3.00 .00 [76.2]
<>
R.36 9.2 R.36 [9.2]% PANEL CUT-OUT .32 [8.2] 8.2 .32
.198 5.03
(10) HOLES V
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Large Recessed Recessed Handles Large Handles Part Number Material Part Number Material
.055 1.40 -1.055[1.40]
177.8 7.00 [177.8]
oW o W o Wo
Finish Finish
■
28 28
steel steel
zinc plated zinc plated
28-10BK 28-10BK
steel steel
black black powder powder coated coated
springloaded loaded bail bail I spring black rubber rubber grip I black grip V
0 0 0 0 5.81 [147.6] 147.6 5.81
5.00 127.0 5.00[ 27.0]
3.81 96.8] 96.8 3.81 R.41 [10.3] 10.3 R.41
03 .198 [5.03] 5.03 0.198 (14) HOLES
A v
16.5 .65 [16.5]
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Large Recessed Recessed Handle Large Handle Part Number Material Part Numberi
28-50A 28-50A
aluminum aluminum
Finish mill mill
springloaded loaded bail bail I spring 7.00 177.8
.060 1.52
5.81 147.6
5.81 147.6 3.81 96.8 3.81 96.8
5.00 127.0
R.41R.41 10.3 10.3
PANEL CUT-OUT
14.4 .57 [14.4]
26
Download www.spep.com Download3DmoDELs @ @ www.spep.com
MOUNTING DIMENSIONS DIMENSIONS MOUNTING Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and and Industrial Industri-1 Hardware Hardware
Part Part Number Number
Dim Dim BB Dim Dim CC Dim Dim D D Dim DimE E DimAA Dim
DI
Dim DimG G DimFF Dim
32CH 32CH
2.74 2.74 [69.5] [69.5]
4.37 4.37 [111.0] [111.0]
2.283 3.937 2.283 3.937 [58.00] [100.00] [100.00] [58.00]
2.05 2.05 [52.0] [52.0]
3.68 3.68 [93.5] [93.5]
2.05 2.05 [52.0] [52.0]
32CH01 32CH01
2.36 2.36 [60.0] [60.0]
3.74 3.74 [95.0] [95.0]
1.889 1.889 [48.00] [48.00]
1.79 1.79 [45.5] [45.5]
3.11 3.11 [79.0] [79.0]
1.79 1.79 [45.5] [45.5]
3.287 3.287 [83.50] [83.50]
Recessed Recessed Handles Handles
Mounting Mounting
Handles
EW PRC DI ICAM ILY
CL
material: die die cast cast zinc zinc I material: finish: textured I finish: textured chrome chrome plated plated handlesnaps snapsinto intoflush flush or or raised raised position I handle position with with internal internal detent detent
DIM B DIM D CENT.
DIM D
.091 2.30 -.1-•-.091 [2.30]
DIM D
.197 [5.00] 5.00 0.197 (4) HOLES
DIM F
DIM F
R.16 4.0 (4) PLCS. DIM C C DIM GG DIM DIM
R.16 4.0 (4) PLCS.
DIM C CENT. 14- .
A aMC
DIM A DI
DIM E DIM E
.177 4.50 HOLE HOLE 0.177[4.50] WITH C'SINK FOR A M4 F.H.S. (4) PLACES
MOUNTING DIMENSIONS
.60 15.2 .60[15.2]
MOUNTING CUT-OUT
RecessedHandle Handle All° Recessed Part Part Number Number
Finish Finish
Material Material
31BK 31 BK
die cast cast zinc zinc die
Pan Pan
Handle Handle
black black powder powder coated coated
grey grey painted painted
5.12 [130.0] 130.0 5.12 118.0 4.65 [118.0] CENT.
4.65 4.65 [118.0] 118.0 r®
.177 [4.50] 4.50 0.177 (4) HOLES HOLES (4)
4.25 [108.0] 108.0 4.25
At, R.16 [4.0] 4.0 12.16 (4) PLCS. PLCS. (4)
I 2.72 [69.0] 69.0 3.11 3.11 [79.0] 79.0 2.72
m
Request Info
1-800-453-1692
4.25 108.0 R.16 4.0 (4) PLCS.
79.0 3.11 [79.0] 3.11 3.583[91.0] 91.0 3.5 CENT. CENT.
2.70 [68.5] 68.5 2.70
# .165 4.20 HOLE HOLE 0.165[4.20] WITH C'SINK C'SINK WITH FOR M4 M4 F.H.S F.H.S FOR (4) PLACES
www.aboveboardelectronics.com
4.65 118.0
m
e
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
.59 15.0 .59 [15.0] .118 [3.00] 3.00 .118 THK.
MOUNTING CU
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
27 27
Handles
Stamped Padlocking L-Handles L-Handles Stamped Padlocking Material Material
Finish Finish
Shaft Shaft Length Length
Shaft Shaft Style Style
Shaft Shaft Size Size
Mounting Mounting
300B 300B
steel steel
brushed & brushed & zinc plated zinc plated
4.00 4.00 [101.6] [101.6]
non non threaded threaded
.313 313 [7.94] [7.94]
front front
300CH 300CH
steel steel
chrome chrome plated plated
4.00 4.00 [101.6] [101.6]
non non threaded threaded
.313 313 [7.94] [7.94]
front front
305P 305P
304SS 304SS
polished polished
4.00 4.00 [101.6] [101.6]
non non threaded threaded
.313 313 [7.94] [7.94]
front front
305B 305B
304SS 304SS
brushed brushed
4.00 4.00 [101.6] [101.6]
non non threaded threaded
.313 313 [7.94] [7.94]
front front
305BTHD 305BTHD
304SS 304SS
brushed brushed
4.00 4.00 [101.6] [101.6]
3/8 --16 16 3/8 thread thread
.313 313 [7.94] [7.94]
front front
305BTHD01 305BTHDO1
304SS 304SS
brushed brushed
1.50 1.50 [38.1] [38.1]
3/8 --16 16 3/8 thread thread
.313 313 [7.94] [7.94]
blind blind
505B 505B
304SS 304SS
brushed brushed
4.00 4.00 [101.6] [101.6]
non non threaded threaded
..500 500 [12.70] [12.70]
front front
Part Part Number Number
C CO
front mount style front mount style holes holes on on escutcheon escutcheon
360° bidirectional bidirectional rotation I 360° rotation design design keyholeallows allows you you to to use use aa standard standard padlock padlock or or dual dual lock lock bracket, use of of I keyhole bracket, enabling enabling the the use 2 X125 & & X125-01 pg. 28 2 padlocks padlocks with with different different key keycodes. codes.See See part part no. no. X125 X125-01 on on pg. 28 gasketavailable available separately, separately, part I gasket part no. no. 300G-01 300G-01
blind style blind mount mount style 1/4-20 threaded 1/4-20 threaded studs studs on on escutcheon escutcheon
1.81 45.9
LENGTH
1.50 38.1 1.50[38.1]
.078 1.98
.38 9.5 .38[9.5]
8.06 204.7
.313 [7.94] .313 [7.94] SQUARE 7 SQUARE SHAFT SHAFT y
2.25 57.2 2.25[57.2]
3.50 88.9 350[88.9]
THREADED SQUARE SQUARE SHAFT SHAFT THREADED
.219 5.56 HOLE HOLE 0.219[5.56] (4) PLACES PLACES (4)
.531 13.49
3/8"-24 0 3/8"-24 THREAD THREAD
6.14 156.0 6.14[156.0]
A R.102 2.58
.500 12.70 ] 0 .500[12.70
.189 4.80
VIEW A VIEW A
1.00 25.4 1.00[25.4]
Dual Dual Lock Lock Brackets Brackets • Part Number Number
X125 X125
Description Description
Material Material
for stamped for stamped handles handles
304SS 304SS
deburred deburred
for cast for cast handles handles
304SS 304SS
deburred deburred
X125-01 X125-01
finish finish
fits handles handles with with special special keyhole I fits keyhole cut-out cut-out
1.44 36.5 1.44 [36.5] r TYP.
.438 [11.13] 11.13 0.438 (2) HOLES HOLES (2)
HANDLE TAB TAB SPECIAL KEY SPECIAL KEY HOLE CUT-OUT HOLE CUT-OUT
O
90° 90° TYP.
.38 [9.5] 9.5 TYP. TYP. .38
.105 [2.67] 2.67 .105
1:10# .63 [15.9] 15.9 .63 TYP. TYP.
ESCUTCHEON TAB TAB SPECIAL KEY KEY HOLE SPECIAL HOLE CUT-OUT CUT-OUT
28 28
Download 31:Immo @ Download @www.spep.com www.spep.com
FRONT VIEW VIEW FRONT
R.25 [6.4] 6.4 R25
PART NO. NO. X125 X125
.098 [2.50] 2.50 .098
R.50 [12.7] 12.7 R50
PART NO. NO. X125-01 X125-01 RIGHT SIDE RIGHT SIDE VIEW VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hir es and Hinges and Industrial Industri -1 Hardware Hardware
Part Part Number Number
Material Material
Finish Finish
Shaft Shaft Length Length
Shaft Shaft Style Style
Shaft Size Shaft Size
Mounting Mounting
309-SS-P 309-55-P
304SS 304SS
polished polished
3.25 [82.6] [82.6] 3.25
.313 [7.94] [7.94] .313
front front
309-SS-PS 309-55-PS
304SS 304SS
passivated passivated
3.25 [82.6] [82.6] 3.25
.313 [7.94] 313 [7.94]
front front
309-S-ZN 309-S-ZN
cast iron cast iron
zinc plated zinc plated
3.25 [82.6] [82.6] 3.25
.313 [7.94] 313 [7.94]
front front
309-S-CH 309-S-CH
cast iron cast iron
chrome plated chrome plated
3.25 [82.6] [82.6] 3.25
.313 [7.94] 313 [7.94]
front front
309BO-SS-P* 309130-SS-P*
304SS 304SS
passivated passivated
3.25 [82.6] [82.6] 3.25
.313 [7.94] 313 [7.94]
blind blind
309THBO-SS-P* 309THBO-SS-P*
304SS 304SS
polished polished
3.25 [82.6] [82.6] 3.25
blind blind
309THBO-SS-P1* 309THBO-SS-P1*
304SS 304SS
polished polished
1.50 [38.1] [38.1] 1.50
3/8" --16 16 3/8" thread thread
.313 [7.94] [7.94] .313 .313 [7.94] [7.94] .313
blind blind
309THBO-SS-P3* 400309THBO-SS-P3*
304SS 304SS
polished polished
3.25 [82.6] [82.6] 3.25
.313 [7.94] [7.94] .313
blind blind
309THBO-SS-P4* 409309THBO-SS-P4*
304SS 304SS
polished polished
2.50 [63.5] [63.5] 2.50
non non threaded threaded
.313 [7.94] [7.94] .313
blind blind
309TH-SS-P 309TH-SS-P
304SS 304SS
polished polished
3.25 [82.6] [82.6] 3.25
.313 [7.94] [7.94] .313
front front
non non threaded threaded
309TH-SS-P1 309TH-SS-P1
316SS 316SS
polished polished
4.00 [101.6] [101.6] 4.00
.313 [7.94] [7.94] .313
front front
309THB-S-ZN 309THB-S-ZN
cast iron cast iron
zinc plated zinc plated
3.25 [82.6] [82.6] 3.25
.313 [7.94] 313 [7.94]
blind blind
309THB-S-ZN1 309THB-S-ZN1
cast iron cast iron
zinc plated zinc plated
2.25 [57.2] [57.2] 2.25
.313 [7.94] 313 [7.94]
blind blind
309TH-S-ZN 309TH-S-ZN
cast iron cast iron
zinc plated zinc plated
3.25 [82.6] [82.6] 3.25
.313 [7.94] 313 [7.94]
front front
309TH-S-ZN01 309TH-S-ZN01
cast iron cast iron
zinc plated zinc plated
1.14 [37.3] [37.3] 1.14
.313 [7.94] 313 [7.94]
front front
3/8" --16 16 3/8" thread thread
1 0
Padlocking L-Handles Padlocking L-Hand les
patented front mount style front mount style holes holes on on escutcheon escutcheon
blind style blind mount mount style 1/4-20 xx.50 .50 long 1/4-20 long threaded studs studs on on threaded escutcheon escutcheon
360° bidirectional bidirectional rotation I 360° rotation design design I all all parts parts include include o-ring o-ring gasketavailable available separately, separately, part I gasket part no. no. 309G-01 309G-01 blind-mounthandles handlesachieve achieveNEMA NEMA 12 when 3096-01 3096-01 face face gasket gasket ii ss used I blind-mount 12 requirements requirements when used *309THBO-SS-P, 309THBO-SS-P1,309130-55-P, 309BO-SS-P,309THBO-55-P3, 309THBO-SS-P3, & & 309THBO-SS-P4 ►*309THB0-55-P,309THBO-55-P1, 309THBO-55-P4 include include an o-ring o-ring and and aa gasket gasketto toachieve achieveNEMA NEMA 12 an 12requirements requirements keyholeallows allows you you to to use use aa standard standard padlock padlock or or dual dual lock lock bracket, use of of 2 I keyhole bracket, enabling enabling the the use 2 padlocks padlocks with different X125 & & X125-01 pg. 28 with different key key codes. codes.See See part part no. no. X125 X125-01 on on pg. 28 1.89 48.00] LENGTH LENGTH 1 89[48
2.03 51.6 2.03[51.6] 1.50 38.1 1.50[38.1] CENT. CENT.
.095 2.40 095[2 40]
.75[ 119.1 15 9. 1 ]
SQ. 7.94 SQ. u .313 .313[7.94]
.313 [7.94] .313 [7.94] SQUARE SQUARE SHAFT
3/8"-24 03/r-24 THREAD THREAD
2.61 66.3 2.61[66.3]
1.13 28.7 1.13[28.7]
.62 15.8 .62[15.8] 6.08 154.4 6.08[ 54.4]
THREADED SQUARE SHAFT THREADED SQUARE SHAFT
A
Handles
,Ro
.219 5.56 0.219[5.56] (3) (3) HOLES HOLES
R.10 2.6 R10[2.6] (2) PLCS. (2) PLCS. .525 13.34 HOLE HOLE 0.525[13.34] FOR HANDLE FOR HANDLE
.500 12.70 HOLE HOLE 0.500[12.70] FOR ESCUTCHEON FOR 61.4 ESCUTCHEON 2.42 4.50 114.3
VIEW A VIEW A
CD
.098 2.50 .500 12.70 SQ.
Padlocking L-Handles Padlocking L-Hand les Material Material
Finish Finish
Shaft Shaft Length Length
Shaft Shaft Size Size
310-SS-P 310-55-P
304SS 304SS
hand hand polished & polished & passivated passivated
4.50 4.50 [114.3] [1143]
.500 .500 [12.7] [12.7]
310-SS-PS 310-55-PS
304SS 304SS
passivated passivated
4.50 4.50 [114.3] [1143]
.500 .500 [12.7] [12.7]
Part Part Number Number
310-S-ZN 310-S-ZN
cast zincplated plated cast iron iron zinc
310-S-CH 310-S-CH
cast iron cast iron
chrome chrome plated plated
4.50 4.50 [114.3] [1143]
.500 .500 [12.7] [12.7]
4.50 4.50 [114.3] [1143]
.500 .500 [12.7] [12.7]
360° bidirectional bidirectional rotation I 360° rotation design design all parts parts include include o-ring o-ring I all gasketavailable available separately, separately, part I gasket part no. no. 310G 310G keyholeallows allows you you to to use use aa standard standard padlock padlock or or dual dual lock lock I keyhole bracket, the use use of of 22 padlocks padlocks with with different different key key bracket, enabling enabling the codes. See no. X125 X125 & & X125-01 on pg. pg. 28 28 codes. See part part no. X125-01 on non-threaded shaft shaft I non-threaded
7.51 190.7
A
.62 15.8
R.10 2.6 (2) PLCS.
.525 13.34 HOLE FOR HANDLE
.500 12.70 HOLE FOR ESCUTCHEON
VIEW A
patented 2.42 [61.4 61.4] 2.42
2.58 65.4
4.50 11149 114.3 4.50 2.00 50.8 CENT.
.098 2.50] .098 [2.50 .500 [12.70 12.70 .500 SQ. EQ.
1.00 25.4 3.30 83.8 1.50 38.1
.280 7.11 (3) HOLES
7.51 [ 190.7 90.7 7.51
A
.62 [15.8 15.8] .02
R.10 2.6 ] R10 [2.6 PLCS. ((2) 7)R-CE
.525 13.34 HOLE 0.525[13.34]HOLE FOR HANDLE FORHANDLE
.500[12.70 12.70[HOLE HOLE 0.500 FOR ESCUTCHEON FORESCUTCHEON
VIEW NEW AA
Request Info
1-800-453-1692 www.aboveboardelectronics.com
2.58 65.4 2.00 50.8 CENT.
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
29
Handles
NUMB AM
_ VGINEERING wun PRODUCTS
Padlocking L-Handles Padlocking L-Handles Part Part Number Number
C
2.42 61.4 2.42[61.4]
4.50 114.3 4.50[
front front
304SS 304SS
hand polished & & hand polished passivated passivated
.625 .625 [15.88] [15.88]
blind blind
311-SS-PS 311-55-PS
304SS 304SS
passivated passivated
4.50 .625 4.50 .625 [114.3] [15.88] [15.88] [114.3]
front front
311-S-ZN 311-S-ZN
cast iron iron cast
zinc plated zinc plated
4.50 .625 4.50 .625 [114.3] [15.88] [15.88] [114.3]
front front
311-S-CH 311-S-CH
cast iron iron cast
chrome chrome plated plated
4.50 .625 4.50 .625 [114.3] [15.88] [15.88] [114.3]
front front
2.58[65.4] -..2.58 65.4 2.00 50.8 2.00[50.8] CENT.
.098 2.50 ] .098] .625 15.88 .625[15.88]
]-6]
SQ.. SQ
1.00 25.4 1.00[25.4] 83.88] 33.30 30[83 1.50 38.1 ] 1.50[38.1
.280 7.11 0280[7.11] (3) HOLES 7.51 190.7 7.51[190.7]
A A
.62 15.8 .62[15.8]
R.10 2.6 R.10[2.6] PLCS. (2) PLC.S.
Mounting Mounting
hand & 4.50 .625 hand polished polished & 4.50 .625 passivated [114.3] [15.88] [15.88] passivated [114.3]
(filWO311-SS-P02* 311-SS-P02*
patented patented
Shaft Shaft Shaft Shaft Length Size Length Size
Finish Finish
304SS 304SS
311-SS-P 311-55-P
CO
Material Material
2.50 2.50 [63.5] [63.5]
keyholeallows allows you you to to use use aa standard standard padlock padlock or or dual dual lock lock I keyhole bracket, the use use of of 22 padlocks padlocks with with different different key key bracket, enabling enabling the codes. X125-01 on pg. 28 on pg. 28 codes. See See part part no. no. X125-01 gasketavailable available separately, separately, part I gasket part no. no. 310G 310G all parts parts include include o-ring o-ring I all * part part no. no. 311-SS-P02 I* 311-SS-P02 has has (3) (3)1/4-20 1/4-20threaded threaded weld weld studs studs instead of through holes on and comes comes with with instead of through holes on escutcheon escutcheon and black black poron poron gasket gasket (part (part no. no. 310G) 310G) 360° bi-directional bi-directional rotation I 360° rotation
O .525 13.34 HOLE HOLE 0.525[13.34] FOR HANDLE
.500 12.70 HOLE HOLE 0.500[12.70] FOR ESCUTCHEON
VIEW A VIEW A
Padlocking L-Handles Padlocking L-Handles Material Material
Finish Finish
Shaft Shaft Length Length
Shaft Shaft Size Size
321-S-ZN 321-S-ZN
cast iron cast iron
zinc plated zinc plated
4.50 [114.3] 4.50 [1143]
.500 [12.70] [12.70] .500
322-S-ZN 322-S-ZN
cast iron cast iron
zinc plated zinc plated
4.50 [114.3] 4.50 [1143]
.625 .625 [15.88] [15.88]
Part Part Number Number
includes o-ring o-ring for for aa smooth I includes smooth handle handle rotation rotation keyholeallows allows you you to to use use aa standard standard padlock padlock or or dual dual lock lock bracket, I keyhole bracket, enabling the use useof of 22 padlocks padlocks with with different different key key codes. enabling the codes. See See part part no. no. X125-01 on pg. 28 X125-01 on pg. 28 gasketavailable available separately, separately, part I gasket part no. no. 321G 321G patented 2.44 62.0 4.50114.3 114.3 ]-] 2.44[62.0] -.-4.50[
2.00 50.8 2.00[50.8] 1.00 25.4 1.00[25.4]
.126 3.20 -•-.126[320]
2.88 73.0 2.88[73.0]
4.84 122.9 4.84[ 22.9] SQUARE SQUARE SHAFT SIZE
7.45 189.2 7.45[189.2]
1.48 37.7 1.48[37.7] 2.66 67.5 2.66[67.5]
Ø.266 [6.76] [6.76] HOLE HOLE WITH 0.266 Ø.406 [1031] [10.31] X82° X 82º CSINK C'SINK 0.406 (2) PLACES OPPOSITE SIDE
A .88 22.4 88[22.4]
.50 12.7 .50[12.7] .20 5.2 .20[5.2]
VIEW A VIEW A
30 30
Download 31)moDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industri -1 Hardware Hardware
Number
Shaft Size Size Shaft
Material Material
Finish Finish
Handles
Heavy Duty Duty Bellcore Bellcore Defeater Heavy Defeater Handles Handles Part Part 90°Rotation Rotation Number 90°
DI
3921 3921
right hand right hand (CC) (CC)
.313 [7.94] 313 [7.94]
304SS 304SS
passivated passivated
3922 3922
left left hand hand (CW) (CW)
.313 [7.94] 313 [7.94]
304SS 304SS
passivated passivated
o.
Meets Bellcore GR-487 Core Spec.
self-lockinghandle handle for for automatic automatic security security I self-locking weather-resistant gasket gasket I weather-resistant padlockhasp hasp for for added added protection I padlock protection tooloperated operated defeater defeater I tool
patented
2.00 50.8 2.00[50.8]
1.50 38.1 1.50[38.1]
2.25 57.2 2.25[57.2] 2.86 72.5 2.86[72.5]
.75 19.1 .75[19.1]
1/4-20 THD. 1/4-20 THD. xx .50 [12.7] [12.7] DEEP .50 DEEP (4) PLACES PLACES (4)
.312 [7.94] .312 [7.94] HEX HEX .20 [5.1] xx .20 [5.1] DEEP DEEP PIN ON PIN ON CENTER CENTER
right hand hand shown shown right part no. 3921 3921 part no.
3.40 86.4 3.40[86.4]
4.50 114.3 4.50[ 14.3] .313 7.94 .313[7.94] SQ. SQ.
6.84 173.8 6.84[ 73.8]
1.16 29.4 1.16[29.4] 1.90 48.3 1.90[48.3]
.530 13.46 0.530[13.46] HOLE HOLE
Bellcore Hex Hex Tool Tool Key Bellcore Key Part Number •rt Number
392-K 392-K
Size
Material Material
Finish
8mm 8mm Bellcore Bellcore hex hex
steel steel
zinc plated zinc plated
.125 [3.18] [3.18] HOLE HOLE .125
soldseparately separately I sold
Heavy Duty Duty 316SS 316SS L-Handles L-Handles Heavy Part Number Part Number
Key Key Code Code
Material Material
Finish Finish
Length Length
Shaft Shaft Size Size
308SS-1250 30855-1250
3.38 .50 1250 316SS passivated 1250 316SS passivated 338 .50 [85.7] [12.7] [12.7] [85.7]
308SS01-1250 3085501-1250
4.38 .50 1250 316SS passivated 1250 316SS passivated 438 .50 [111.1] [12.7] [111.1] [12.7]
includes(3) (3)mounting mountingscrews screwsand and (2) (2) ringed ringed keys keys I includes 360° bi-directional bi-directional rotation I 360° rotation ►padlockable padlockable 2.48 62.9 2.48[62.9]
LENGTH .126 3.20 THK THK. -0-.126[3.20]
2.00 [50.8] 50.8 2.00 1.00 [25.4] 25.4 1.00
patented
1.56 [39.6] 39.6 1.56
.50 12.7 SQ.
9.33 237.0
A
.525 [13.34] 13.34 0.525 (2) HOLES HOLES (2)
27.1 1.07 [27.1]
6.19 157.2 6.19[ 57.2] 3.12 79.2] 79.2 3.12
Ø.320 [8.13] [8.13] HOLE HOLE WITH WITH 0.320 Ø.500 [12.70] [12.70] X X 82° 82º C'SINK C'SINK 0.500 (3) PLACES, OPPOSITE SIDE
VIEW A VIEW A
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
31 31
Handles
Heavy Duty Duty Padlocking Padlocking L-Handles L-Handles Heavy Part Part Number Number
C
3.00 76.2 3.00[76.2]
CO
2.00 50.8 2.00[50.8]
.266 [6.75] [6.75] SCI. SQ. .266 (3) PLACES PLACES (3)
2.00 50.8 2.00[50.8]
306 306
4.50 114.3 4.50[114.3]
4.62 117.3 4.62[117.3]
steel steel
Finish Finish
Square Square Shaft Size Shaft Size
zinc plated .500[12.70] [12.70] zinc plated .500
360° bi-directional bi-directional rotation I 360° rotation
.12 3.0 12]3.0]
I
2.38 60.3 2.38[60.3]
Material Material
SQ. SHAFT
8.00 203.2 8.00[203.2]
Ø.500 [12.70] (2) HOLES
.25 6.4
Traffic Traffic Enclosure Enclosure Handle Handle Part Number Part Number
302-SS-00 302-55-00
4.50 114.3 4.50[114.3
Material Material
Finish Finish
304SS 304SS
passivated passivated
Material Material
Finish Finish
316SS 316SS
passivated passivated
1.56 39.7 1.56[39.7]
.265 6.73 0.265[6.73] HOLE HOLE
SQ. .625 15.88 50. 625[15.88]
.250 6.35 0.250[6.35] HOLE HOLE
.80 20.2 80[20.2] 2.00 50.8 2.00[50.8]
4.38[ 11.1] 4.38 111.1
8.63 219.2 8.63[219.2] .098 2.50 .098[2.50] A
.500 12.70 0.500[12.70] HOLE HOLE
IF
.69 17.4 ] 69[17.4
1.31 33.3 (1.31]33.3]
Traffic Enclosure Escutcheon Traffic Enclosure Handle Handle with with Escutcheon
A VIEW A VIEW
.750 19.05 0.750] 9.051-•••
316SS
Part Part Number Number
324SS 32455
onlyhandle handleand andescutcheon escutcheonare are316SS 316SS I only 360° bi-directional bi-directional rotation I 360° rotation 2.52 63.9 2.52 64.1
1.73 43.8
1.18 30.0
.37 9.3 .46 11.6
1.78 45.1
2.33 59.3
2.50 63.6 4.82 122.4
.80 20.3
1.26 32.1
.19 4.7 7.85 199.3
.75 19.1
A
A .375 xx .750 .750 .375 (2) OBROUNDS (2) OBROUNDS .59 15.0 .59[15.0] .77 19.4 77 [19.4] 1.46 37.1 1.46[37.1] SECTION A-A SECTION MA
32 32
Download www.spep.com Download3DmoDELs @ @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industri -1 Hardware Hardware
1157-01 1157-01
Rotation 360° Rotation 360°
Shaft Shaft Style Style
Shaft Shaft Length Length
Shaft Shaft Size Size
bidirectional bidirectional
M10x1.5 M10x1.5 thread thread
3.00 3.00 [76.2] [76.2]
.313 .313 [7.94] [7.94]
Locking FinishIII Locking black, black, textured textured
no no
includesroller roller cam cam (may 697 on on pg. pg. 48) 48) I includes (may be be purchased purchased separately, separately, see see part part no. no.697 madefrom fromglass glassreinforced reinforcedplastic plasticwith withUV UV inhibitors I made inhibitors 32.0 011.26 26 [32 0] griprange rangebetween between2.04 2.04[51.8] [51.8]to to2.14 2.14 [54.4] [54.4] I grip handleincludes includes o-rings o-rings I handle
1.71 [43.4] 43.4 1.71
Handles
Plastic HVACL-Handle L-HandleLatch Latch with with Roller Roller Cam Cam CV Plastic HVAC Part Part Number Number
1.71 1.71 [43.4] [43.4] -- 1.82 1.82 [46.2] [46.2] REF. REF.
.313 [7.94] 7.94 .313 SQUARE SQUARE
44.2 1.74 [44.2] 1.74
4.13 [104.8 4.13 04.8] 2.04 [51.8] [51.8] -2.04 2.14 [54.4] [54.4] 2.14 GRIP GRIP 3.00 [76.1 76.1 ] 3.00
1 1: 1
Plastic HVAC Padlocking Plastic HVAC Padlocking L-Handles L-Handles Mount Mount
Rotation Rotation 360° 360°
Shaft Shaft Style Style
Shaft Shaft Length Length
Shaft Shaft Size Size
Locking Locking
Finish Finish
3940 3940
front front
CC CC
M10x1.5 M10x1.5 thread thread
3.50 3.50 [88.9] [88.9]
.313 313 [7.94] [7.94]
no no
black, black, textured textured
3941 3941
front front
CW CW
M10x1.5 M10x1.5 thread thread
3.50 3.50 [88.9] [88.9]
.313 313 [7.94] [7.94]
no no
black, black, textured textured
3940LK 3940LK
front front
CC CC
M10x1.5 M10x1.5 thread thread
3.50 3.50 [88.9] [88.9]
.313 313 [7.94] [7.94]
yes yes
black, black, textured textured
3941LK 3941LK
front front
CW CW
M10x1.5 M10x1.5 thread thread
3.50 3.50 [88.9] [88.9]
.313 313 [7.94] [7.94]
yes yes
black, black, textured textured
Part Part Number Number
1.97 [50.0] [50.0] grip I 1.97 grip range range is is preset; preset; may maybe bechanged changed with with minimum minimum order order quantity quantity includesroller roller cam cam (may (may be separately, see 699 on pg. 49) 49) I includes be purchased purchased separately, see part part no. no. 699 on pg. madefrom fromglass glass reinforced reinforced plastic I made plastic handleincludes includes o-rings o-rings I handle .256 6.50 HOLEWITH WITH 6.50 256[6 50] HOLE HOLE WITH ca.256 .614[15.60] [15.60]C'BORE C'BORE .614 0.614 [15.60] C'BORE (2)PLACES PLACES (2)
1.6942.9 42.9 1.69 1.69[42.9]
1.7644.6 44.6 1.76 1.76[44.6]
3.5088.8 88.8 3.50 3.50[88.8]
1.8146.0 46.0 1.81 1.61[46.0]
1.7544.4 44.4 1.75 1.75[44.4]
.3137.95 7.95 SG. SQ. .313 SQ. .313[7.95]
3.6392.1 92.1 3.63[92.1] 3.63
2.6366.7 66.7 2.63
LOGO LOGO DECAL DECAL POCKET POCKET 4.25107.9 107.9 4.25] 07.9] 4.25
GRIP GRIP -4-• GRIP
.6717.0 17.0 .67 0.67[17.0]
ACCEPTS5/16 5/16 ACCEPTS 5/16 ACCEPTS PADLOCK PADLOCK
RIGHTSIDE SIDEVIEW VIEW RIGHT RIGHT SIDE VIEW
FRONTVIEW VIEW FRONT VIEW FRONT
REARVIEW VIEW REAR REAR VIEW
PlasticHVAC HVAC Bidirectional Bidirectional L-Handles L-Handles 110 Plastic Part Part Number Number
1153 1153 1153-01 1153-01 1153-02 1153-02
Cam Type Cam Type
Shaft Shaft Style Style
Length Length
Shaft Shaft Size Size
Grip Grip
Finish Finish
plastic 3.66[93.0] [93.0] plastic roller rollercam cam 3.66
.313 [7.94] [7.94] 35.35[8.9] [8.9]- -2.25 2.25 [57.2] [57.2] black black 313 M10x1.5 M10x1.5313 steel offset offset cam 3.66 [93.0] [93.0] .313 [7.94] [7.94] 35 .35[8.9] [8.9]- -2.25 2.25 [57.2] [57.2] black black steel cam 3.66 thread thread plastic roller cam 5.66 [143.8] .313 [7.94] .35 [8.9] 4.25 [108.0] black plastic roller cam 5.66 [143.8] 313 [7.94] 35 [8.9] - 4.25 [108.0] black
madefrom fromglass glassreinforced reinforcedplastic plasticwith withUV UV inhibitors I made inhibitors canbe beinstalled installed as as either either aa right right hand or left I can hand or left hand hand handle handle includescam cam (roller (roller cam separately, see no. 698 on pg. pg. 48) 48) I includes cam may may be be purchased purchased separately, see part part no. 698 on 1.90 48.3 01.99[45.5]
2.63 66.9 2.83[00.9]
LENGTH LENGTH
.531 [13.5] 13.5 HOLE HOLE 0.531 15.9 .63 [15.9
.220 [5.6] 5.6 0.220 OPTION TO ADD ONE LOCATOR HOLE OR BOTH LOCATOR HOLES LOCATOR HOLES 45°
45°
HOLE ON SIDE HOLE ONTHIS THIS SIDE 5° 90 CW IS FOR A 90° HANDLE ROTATION
MUD plastic plastic roller roller cam cam
HOLE ON THIS THIS SIDE SIDE IS FOR A 90 90° CCW HANDLE ROTATION
CUT-OUT DETAILS DETAILS CUT-OUT
steel offset offset cam steel cam
2.53 64.4
.313 7.94 SQ. .313[7.94] So.
.70 17.7
3MM HEX LOCKING SCREW
4.99 126.7
.313 .313 [7.94] [7.94] SQUARE SQUARE SHAFT SHAFT 7I
ROLLER CAM ROLLER CAM GRIP
GRIP GRIP
3/8"-24 03/8'-24 THREAD THREAD
1.80 45.7
THREADED SHAFT THREADED SQUARE SQUARE SHAFT .77 19.6 .n[14.8]
STEEL CAM STEEL CAM
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
33 33
--- nUCTS
Handles
SIERRA PACIFY'
Large Large 5/16" 5/16" Sq. Sq. Shaft Shaft L-Handles L-Handleswith withPadlocking Padlocking Option Option 1.71 [43.5] 43.5 1.71
ADA
EW FRC DUCAMILY
.252 [6.40] 6.40 HOLE HOLE WITH WITH 0 .252
4.00 101.6
2.81 71.3
.492[12.50] [12.50]xx82 82° C'SINK C'SINK 0.492 (2) PLACES (2) PLACES
.87 22.2
3.20 [81.3] 81.3 3.20
2.00 50.8
.31 8.0 SQ.
7.60 [193.0] 193.0 7.60
patented
13.5 .53 .53 [13.5] (2) PLACES (2) PLACES
6.00 152.4
.313 [7.94] [7.94] .313 SQUARE SQUARE
3/8"-24 03/8'-24 THREAD THREAD
SHAFT
E THREADED SQUARE SHAFT THREADED SQUARE SHAFT
Rotation Rotation
Locking Locking
Keyed Keyed (2 Keys/Lock) Keys/Lock) (2
Shaft Length Shaft Length
Shaft Style Shaft Style
Finish Finish
Mount Mount
Mounting Centers Mounting Centers
336001LK 336001 LK
90° CC 90° CC
yes yes
CH751 CH751
4.00 [101.6] [101.6] 4.00
3/8" -20 thread 3/8"-20 thread
chrome chrome
front front
2.000 [50.80] [50.80] 2.000
3360LK 3360LK
90° CW CW 90°
yes yes
CH751 CH751
4.00 [101.6] [101.6] 4.00
3/8" -20 thread 3/8"-20 thread
chrome chrome
front front
2.000 [50.80] [50.80] 2.000
360° 360°
yes yes
CH751 CH751
4.00 [101.6] [101.6] 4.00
3/8" -20 thread 3/8"-20 thread
chrome chrome
front front
2.000 [50.80] [50.80] 2.000
Part Part Number Number
336004LK 336004LK
includes dust dust shutter I includes shutter handlesinclude include(2) (2) ringed ringed keys keys I handles doesnot notinclude includemounting mountingscrews screws(1/4!' (1/4" or or #14 I does #14 recommended) recommended) material: die die cast cast zinc zinc I material:
meetsADA ADA requirements I meets requirements achieveNEMA NEMA 12 with I achieve 12and and IP64 IP64enclosure enclosureaccess accessrequirements requirements when when combined combined with (2) (2) escutcheon escutcheon gaskets gaskets sold sold separately separately (part (part no. no. 336G) 336G)
Large Large 1/2" 1/2"Sq. Sq.Shaft Shaft L-Handles L-Handleswith withPadlocking Padlocking Option Option 1.71 43.5
ADA
HOLE WITH .252 [6.40] 6.40 HOLE WITH 0.252 .492[12.50] [12.50] xx82° 82 C'SINK C'SINK 0.492 (2) PLACES (2) PLACES
5.00 127.0
2.81 71.3
.87 22.2
2.00 50.8
3.20 81.3
.50 12.7 SQ. 7.60 193.1
patented
.54 13.7 (2) PLACES
6.00 152.4
Part Part Number Number
3370LK 3370LK
Rotation Rotation
Locking Locking
Keyed Keyed Shaft Length Shaft Length (2 Keys/Lock) Keys/Lock) (2
Finish Finis1 711111.
Mount Centers Mount Mounting Mounting Centers
90° CW 90° CW
yes yes
CH751 CH751
5.00 [12.7] [12.7] 5.00
non-threaded non-threaded
chrome chrome
front front
2.000 [50.80] [50.80] 2.000
337004LK 337004LK
360° 360°
yes yes
CH751 CH751
5.00 [12.7] [12.7] 5.00
non-threaded non-threaded
chrome chrome
front front
2.000 [50.80] [50.80] 2.000
3370LKBK 3370LKBK
90° CW 90° CW
yes yes
CH751 CH751
5.00 [12.7] [12.7] 5.00
non-threaded non-threaded
matte black powder coat, lightly lightly textured matte black powder coat, textured
front front
2.000 [50.80] [50.80] 2.000
337001LK 337001 LK
90° CC CC 90°
yes yes
CH751 CH751
5.00 [12.7] [12.7] 5.00
non-threaded non-threaded
chrome chrome
front front
2.000 [50.80] [50.80] 2.000
337001LKBK 337001 LKBK
90° CC CC 90°
yes yes
CH751 CH751
5.00 [12.7] [12.7] 5.00
non-threaded non-threaded
matte black powder coat, lightly lightly textured matte black powder coat, textured
front front
2.000 [50.80] [50.80] 2.000
includes dust dust shutter I includes shutter handlesinclude include(2) (2) ringed ringed keys keys I handles doesnot notinclude include mounting mounting screws screws I does (1/4" (1/4!'or or#14 #14recommended) recommended)
34 34
Shaft Shaft Style Style
Request Info
material: die die cast cast zinc zinc I material: meetsADA ADA requirements I meets requirements achieveNEMA NEMA 12 I achieve 12and andIP64 IP64enclosure enclosureaccess accessrequirements requirements when when combined combined with with (2) (2) escutcheon escutcheon gaskets sold separately gaskets sold separately (part (part no. no. 336G) 336G) 1-800-453-1692
Download 3DmoDELs @ @www.spep.com www.spep.comwww.aboveboardelectronics.com Download
Hinges Hinges and and Industrial Industri-1 Hardware Hardware
1.71 43.5
Large Large L-Handles L-Handles
DI
6.40] HOLE HOLE WITH WITH .252[6.40 0 .252 .492xx82° 82° C'SINK C'SINK 0.492 (2) PLACES (2) PLACES
Handles
ADA
2.69 68.3
4.00 101.6
MOUNTING MOUNTING CENTERS CENTERS
3.20 3.20[ 81.3 81.3
.313 7.95 SQ.
patented
.88 22.3
7.60 193.1 .313 [7.94] [7.94] .313
6.00 152.4
front-mount locking locking front-mount shown shown
3/8"-24 03/8'-24 THREAD THREAD
SQUARE SQUARE 7 SHAFT j SHAFT
THREADED SQUARE THREADED SQUARE SHAFT SHAFT
90° 90° Rotation Rotation
Locking Locking
Keyed Keyed (2 Keys/Lock) Keys/Lock) (2
90° CW CW 90°
yes yes
CH751 CH751
336201 336201
90° CC CC 90°
yes yes
CH751 CH751
3363 3363
90° CW CW 90°
no no
non-locking non-locking
Part Part Number Number
3362 3362
336301 336301
90° CC CC 90°
no no
non-locking non-locking
3462 3462
90° CW CW 90°
yes yes
CH751 CH751
346201 346201
90° CC CC 90°
yes yes
CH751 CH751
3463 3463
90° CW CW 90°
no no
non-locking non-locking
346301 346301
90° CC CC 90°
no no
non-locking non-locking
3360 3360
90° CW CW 90°
yes yes
CH751 CH751
336003 601)336003
360° 360°
no no
non-locking non-locking
336004 600336004
360° 360°
yes yes
CH751 CH751
336001 336001
90° CC CC 90°
yes yes
CH751 CH751
3361 3361
90° CW CW 90°
no no
non-locking non-locking
336101 336101
90° CC CC 90°
no no
non-locking non-locking
3460 3460
90° CW CW 90°
yes yes
CH751 CH751
346001 346001
90° CC CC 90°
yes yes
CH751 CH751
3461 3461
90° CW CW 90°
no no
non-locking non-locking
346101 346101
90° CC CC 90°
no no
non-locking non-locking
3364 3364
90° CW CW 90°
yes yes
CH751 CH751
336401 336401
90° CC CC 90°
yes yes
CH751 CH751
3365 3365
90° CW CW 90°
no no
non-locking non-locking
336501 336501
90° CC CC 90°
no no
non-locking non-locking
3464 3464
90° CW CW 90°
yes yes
CH751 CH751
346401 346401
90° CC CC 90°
yes yes
CH751 CH751
3465 3465
90° CW CW 90°
no no
non-locking non-locking
346501 346501
90° CC CC 90°
no no
non-locking non-locking
N.
Shaft Length Shaft Length
Shaft Shaft Style Style
Finish Finish
Mount Mount
Mounting Mounting Centers Centers
4.00 [101.6] 4.00 [101.6]
3/8" 3/8" -- 24 24 thread thread
chrome chrome
front front
1.813 [46.04] [46.04] 1.813
4.00 [101.6] 4.00 [101.6]
3/8" 3/8" -- 24 24 thread thread
chrome chrome
blind blind
1.813 [46.04] [46.04] 1.813
4.00 [101.6] 4.00 [101.6]
3/8" 3/8" -- 24 24 thread thread
chrome chrome
front front
2.000 [50.80] [50.80] 2.000
4.00 [101.6] 4.00 [101.6]
3/8" 3/8" -- 24 24 thread thread
chrome chrome
blind blind
2.000 [50.80] [50.80] 2.000
4.00 [101.6] 4.00 [101.6]
3/8" 3/8" -- 24 24 thread thread
chrome chrome
front front
2.250 [57.15] [57.15] 2.250
4.00 [101.6] 4.00 [101.6]
3/8" 3/8" -- 24 24 thread thread
chrome chrome
blind blind
2.250 [57.15] [57.15] 2.250
material: die die cast cast zinc zinc I material: achieveNEMA NEMA 12 I achieve 12and andIP64 IP64enclosure enclosureaccess accessrequirements requirementswhen whencombined combined with withescutcheon escutcheon gasket gasket sold sold separately, separately, part part no. no. 336G 336G meetsADA ADA requirements I meets requirements includes dust dust shutter I includes shutter I locking locking handles handlesinclude include(2) (2) ringed ringed keys keys front-mounthandles handlesdo donot notinclude includemounting mountingscrews screws(1/4!' (1/4" or I front-mount or #14 #14 recommended) recommended) blind-mounthandles handlesinclude include(2) (2)1/41/4 -20 20xx.63 .63 [16.0] [16.0] long screws I blind-mount long mounting mounting screws all handles handles include include 3/8"-24 3/8"-24 keps I all keps nuts nuts Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
35 35
Handles
a"."C
ENGINEERING AND PRODUCTS
Medium L-Handles L-Handles Medium
ADA 1.56 39.7 1.56[39.7]
.217 5.50 HOLE HOLE WITH WITH 0.217[5.50] .386 xx 82* 82 C'SINK C'SINK 0.386 (2) PLACES (2) PLACES
C CO
2.31 58.8 2.31[58.8]
4.00 101.6 4.00[101.6
I
MOUNTING MOUNTING CENTERS CENTERS
2.92 74.1 2.92[74.1]
.313 7.95 SQ. SQ. .313[7.95]
patented patented
.63 15.9 0.63[ 5.9]
6.46 164.0 6.46[164.0]
front-mount locking locking front-mount shown shown
5.00 127.0 ] 5.00[127.0
.313 [7.94] .313 [7.94] SQUARE SQUARE SHAFT FT
3/8"-24 03/8•-24 THREAD THREAD
E THREADED SQUARE SQUARE SHAFT SHAFT THREADED
Part Part Number Number
90° 90° Rotation Rotation
3352 3352
CW CW
335201 335201
CC CC
3353 3353
CW CW
335301 335301
CC CC
3452 3452
CW CW
345201 345201
CC CC
3455 3455
CW CW
345501 345501
CC CC
3350 3350
CW CW
335001 335001
CC CC
3351 3351
CW CW
335101 335101
CC CC
3450 3450
CW CW
345001 345001
CC CC
3453 3453
CW CW
345301 345301
CC CC
3354 3354
CW CW
335401 335401
CC CC
3355 3355
CW CW
335501 335501
CC CC
3454 3454
CW CW
345401 345401
CC CC
3451 3451
CW CW
345103 345103
CC CC
Locking Locking
Keyed Keyed (2 Keys/Lock) (2 Keys/Lock)
yes yes
CH751 CH751
no no
non-locking non-locking
yes yes
CH751 CH751
no no
non-locking non-locking
yes yes
CH751 CH751
no no
non-locking non-locking
yes yes
CH751 CH751
no no
non-locking non-locking
yes yes
CH751 CH751
no no
non-locking non-locking
yes yes
CH751 CH751
no no
non-locking non-locking
Shaft Shaft Length Length
Shaft Shaft Style Style
Finish ish
Mount Mount
Mounting Mounting Centers Centers
4.00 [101.6] 4.00 [101.6]
3/8"" -- 24 24 3/8 thread thread
chrome chrome
front front
1.750 1.750 [44.45] [44.45]
4.00 [101.6] 4.00 [101.6]
3/8"" -- 24 24 3/8 thread thread
chrome chrome
blind blind
1.750 1.750 [44.45] [44.45]
4.00 [101.6] 4.00 [101.6]
3/8"" -- 24 24 3/8 thread thread
chrome chrome
front front
1.813 1.813 [46.04] [46.04]
4.00 [101.6] 4.00 [101.6]
3/8"" -- 24 24 3/8 thread thread
chrome chrome
blind blind
1.813 1.813 [46.04] [46.04]
4.00 [101.6] 4.00 [101.6]
3/8"" -- 24 24 3/8 thread thread
chrome chrome
front front
2.000 [50.80] [50.80] 2.000
4.00 [101.6] 4.00 [101.6]
3/8"" -- 24 24 3/8 thread thread
chrome chrome
blind blind
2.000 [50.80] [50.80] 2.000
material:die diecast cast zinc zinc I material: achieveNEMA NEMA12 12and andIP64 IP64enclosure enclosureaccess access requirements combined with with escutcheon escutcheon gasket gasket sold sold separately, I achieve requirements when when combined separately, part part no. no.335G 335G meetsADA ADA requirements requirements I meets includesdust dust shutter shutter I includes lockinghandles handlesinclude include (2) (2) ringed ringed keys keys I locking front-mounthandles handlesdo donot notinclude includemounting mountingscrews screws (#10 (#10 recommended) I front-mount recommended) blind-mounthandles handlesinclude include(2) (2)10-32 10-32xx.41 .41[10.4] [10.4] long long mounting mountingscrews screws I blind-mount allhandles handlesinclude include 3/8"-24 3/8"-24 keps keps nuts nuts I all
36 36
Request Info
1-800-453-1692
Download Download 31:Immo @@www.spep.com www.spep.comwww.aboveboardelectronics.com
Hinges Industrial Hingesand and Indr' -i Hardware Hardware
Small Small L-Handles L-Handles
.217 5.50 HOLE HOLEWITH WITH 0.217[5.50]
36.5 1.44 1.44[36.5]
.386 xx 82' 82 CSINK C'SINK 0.386 (2) PLACES PLACES (2)
2.11 53.7 2.11[53.7]
4.00 101.6 4.00[101.6]-0-.
Handles
ADA
MOUNTING MOUNTING CENTERS CENTERS
2.54 64.5 2.54[64.5]
patented patented .313 7.95 SO. SQ. .313[7.95] 5.27 133.9 5.27[ 33.9]
front-mount locking locking front-mount shown shown
.63 15.9 0.63[15.9]
4.00 101.6 4.00[ 101.6]
.313 [7.94] .313 [7.94] SQUARE SQUARE SHAFT FT
3/8"-24 03/8'-24 THREAD THREAD
THREADED SQUARE SHAFT THREADED SQUARE SHAFT
Part Part Number Number
Rotation Rotation
3151 3151
90° CW CW 90°
3152 3152
90° CC CC 90°
3154 3154
90° CW CW 90°
3155 3155
90° CC CC 90°
3251 3251
90° CW CW 90°
3252 3252
90° CC CC 90°
3254 3254
90° CW CW 90°
Locking Locking
Keyed Keyed (2 Keys/Lock) Keys/Lock) (2
yes yes
CH751 CH751
no no
non-locking non-locking
yes yes
CH751 CH751
no no
non-locking non-locking
yes yes
CH751 CH751
no no
non-locking non-locking
3255 3255
90° CC CC 90°
3153 3153
90° CW CW 90°
315301 315301
90° CC CC 90°
3157 3157
90° CW CW 90°
315701 315701
90° CC CC 90°
315304 315304
360° 360°
yes yes
CH751 CH751
315403 315403
360° 360°
no no
non-locking non-locking
yes yes
CH751 CH751
3253 3253
90° CW CW 90°
325301 325301
90° CC CC 90°
3257 3257
90° CW CW 90°
325701 325701
90° CC CC 90°
3156 3156
90° CW CW 90°
315601 315601
90° CC CC 90°
3159 3159
90° CW CW 90°
315901 315901
90° CC CC 90°
3256 3256
90° CW CW 90°
325601 325601
90° CC CC 90°
3259 3259
90° CW CW 90°
325901 325901
90° CC CC 90°
no no
non-locking non-locking
yes yes
CH751 CH751
no no
non-locking non-locking
yes yes
CH751 CH751
no no
non-locking non-locking
Shaft Length Shaft Length
Shaft Style Shaft Style
Finish Finish
Mount Mount
Mounting Mounting Centers Centers
4.00 4.00 [101.6] [101.6]
3/8"" --24 24 3/8 thread thread
chrome chrome
front front
1.500 [38.10] [38.10] 1.500
4.00 4.00 [101.6] [101.6]
3/8"" --24 24 3/8 thread thread
chrome chrome
blind blind
1.500 [38.10 [38.10 1.500
chrome chrome
front front
1.750 [44.45] [44.45] 1.750
4.00 4.00 [101.6] [101.6]
3/8" -- 24 3/8" 24 thread thread
non-threaded non-threaded
4.00 4.00 [101.6] [101.6]
3/8"" --24 24 3/8 thread thread
chrome chrome
blind blind
1.750 [44.45] [44.45] 1.750
4.00 4.00 [101.6] [101.6]
3/8"" --24 24 3/8 thread thread
chrome chrome
front front
1.813 [46.04] [46.04] 1.813
4.00 4.00 [101.6] [101.6]
3/8"" --24 24 3/8 thread thread
chrome chrome
blind blind
1.813 [46.04] [46.04] 1.813
material: die die cast cast zinc zinc I material: achieveNEMA NEMA 12 I achieve 12and andIP64 IP64enclosure enclosureaccess accessrequirements requirementswhen whencombined combined with withescutcheon escutcheon gasket gasket sold sold separately, separately, part part no. no. 315G 315G meetsADA ADA requirements I meets requirements includes dust dust shutter I includes shutter locking handles handlesinclude include(2) (2) ringed ringed keys keys I locking front-mounthandles handlesdo donot notinclude includemounting mountingscrews screws (#10 (#10 recommended) I front-mount recommended) blind-mounthandles handlesinclude include(2) (2)8-32 8-32xx .25 .25 [6.4] [6.4] long I blind-mount long mounting mounting screws screws all handles handles include include 3/8"-24 3/8"-24 keps I all keps nuts nuts Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
37 37
Handles
Small Cam Small Chrome Chrome L-Handles L-Handles with with 3-Point 3-Point Cam
I P64 ADA 1.44 36.5
C
SHAFT LENGTH LENGTH SHAFT rl [ GRIP GRIP
2.11 53.7 2.11[53.7]
I 38.0 1.50 1.50[38.0] SHORT CAM CAM SHORT
2.24 57.0 2.24[57.0] LONG CAM CAM LONG
SQ. .313 7.95 SQ. .313[7.95]
2.54 64.5 2.54[64.5]
1.50 38.1 1.50[38.1 A
8-32 THD. THD. xx 8-32 .256 [6.50] [6.50] DEEP DEEP .256 (2) PLACES PLACES (2)
5.27 133.9 5.27] 33.9]
patented
A
.63 15.9 -0.63[15.9] .14 3.6
4.00 101.6 4.00[101.6]
8-32 THD. xx 8-32 THD. .256 [6.50] [6.50] DEEP DEEP .256 (2) PLACES (2) PLACES
I .8
1.47 37.3 1.47[37.3]
SECTION A-A SECTION A-A
.313 [7.94] .313 [7.94] SQUARE SQUARE SHAFT SHA FT
3/8"-24 453/8'-24 THREAD THREAD
THREADED SQUARE SQUARE SHAFT SHAFT THREADED
Part Part Number Number
Cam Type Cam Type
35CH-01 35CH-01
short short
35CH-01L 35CH-01 L
long long
35CH-02 35CH-02
short short
35CH-02L 35CH-02L
long long
35CH-03 35CH-03
short short
35CH-03L 35CH-03L
long long
36CH-01 36CH-01
short short
36CH-01L 36CH-01 L
long long
36CH-02 36CH-02
short short
36CH-02L 36C H-02L
long long
36CH-03 36CH-03
short short
36CH-03L 36C H-03L
long long
35CH-04 35CH-04
short short
35CH-04L 35CH-04L
long long
35CH-05 35CH-05
short short
35CH-05L 35CH-05L
long long
35CH-06 35CH-06
short short
35CH-06L 35CH-06L
long long
36CH-04 36CH-04
short short
36CH-04L 36C H-04L
long long
36CH-05 36CH-05
short short
36CH-05L 36C H-05L
long long
36CH-06 36CH-06
short short
36CH-06L 36C H-06L
long long
Shaft Length Shaft Length
Grip Grip
1.25 [31.8] [31.8] 1.25
.63 [16.0] .75 [19.1] [19.1] .63 [16.0] --.75
1.75 [[44.5] 1.75 44.5]
.63 [16.0] 1.25 [31.8] [31.8] .63 [16.0] --1.25
2.25 [57.2] 2.25 [57.2]
.63 [16.0] 1.75 [44.5] [44.5] .63 [16.0] --1.75
1.25 [31.8] [31.8] 1.25
.63 [16.0] .75 [19.1] [19.1] .63 [16.0] --.75
1.75 [[44.5] 1.75 44.5]
.63 [16.0] 1.25 [31.8] [31.8] .63 [16.0] --1.25
2.25 [57.2] 2.25 [57.2]
.63 [16.0] [16.0] -- 1.75 .63 1.75 [44.5] [44.5]
1.25 [31.8] [31.8] 1.25
.63 [16.0] .75 [19.1] [19.1] .63 [16.0] --.75
1.74 [44.5] [44.5] 1.74
.63 [16.0] 1.25 [31.8] [31.8] .63 [16.0] --1.25
2.25 [57.2] 2.25 [57.2]
.63 [16.0] [16.0] -- 1.75 .63 1.75 [44.5] [44.5]
1.25 [31.8] [31.8] 1.25
.63 [16.0] .75 [19.1] [19.1] .63 [16.0] --.75
1.75 [[44.5] 1.75 44.5]
.63 [16.0] 1.25 [31.8] [31.8] .63 [16.0] --1.25
2.25 [57.2] 2.25 [57.2]
.63 [16.0] [16.0] -- 1.75 .63 1.75 [44.5] [44.5]
Rotation Rotation
Key Key Code Code
90° CW 90° CW
non-locking non-locking
90° CW 90° CW
CH751 CH751
90° CC 90° CC
non-locking non-locking
90° CC 90° CC
CH751 CH751
material: die die cast cast zinc zinc I material: achieveNEMA NEMA 12 I achieve 12and andIP64 IP64enclosure enclosureaccess accessrequirements requirementswhen whencombined combined with withescutcheon escutcheon gasket gasket sold sold separately, separately, part part no. no. 315G 315G meetsADA ADA requirements I meets requirements locking handles handlesinclude include(2) (2) ringed ringed keys keys I locking handlesare areblind-mount blind-mountand andinclude include(2) (2)8-32 8-32xx .25 .25 [6.4] [6.4] long I handles long mounting mounting screws screws all handles handles include include 3/8"-24 3/8”-24 keps I all keps nuts nuts for for the the threaded threaded shaft shaft may be be used used with with part 61 I may part number number 723 723 rod, rod, pg. pg. 61
38 38
Request Info
Download 3Dmour @@www.spep.com Download www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware Hardware Hinges ind Industrial
1.44 36.5
Small Black L-Handles Cam Small Black L-Handles with with 3-Point 3-Point Cam
SHAFTLENGTH LENGTH -.4- SHAFT 2.11 53.7 2.11[53.7]
GRIP GRIP
2.24 57.0 2.24[57.0] LONG CAM
Handles
ra
SQ. .313 7.95 SQ. .313[7.95]
1.50 38.0 LONG CAM 1.50[360] SHORT CAM CAM SHORT 2.54 64.5 2.54[64.5]
1.50 38.1 A
8-32 THD. THD. xx 8-32 .256 [6.50] [6.50] DEEP DEEP .256 (2) PLACES PLACES (2)
5.27 133.9 5.27[ 33.9]
4.00 101.6 4.00[101.6]
A
.63 15.9
patented .14 3.6
8-32 THD. THD. xx 8-32 .256 [6.50] [6.50] DEEP DEEP .256 (2) PLACES PLACES (2) 1.47 37.3 1.47[37.3]
SECTION A-A SECTION A-A
.313 [7.94] .313 [7.94] SQUARE SQUARE SHAFT FT
3/8"-24 03/8'-24 THREAD THREAD
THREADED SQUARE SQUARE SHAFT SHAFT THREADED
Part Part Number Number
Cam Type Cam Type
35BK-01 35BK-01
short short
35BK-01L 35BK-01L
long long
35BK-02 35BK-02
short short
35BK-02L 35BK-02L
long long
35BK-03 35BK-03
short short
35BK-03L 35BK-03L
long long
36BK-01 36BK-01
short short
36BK-01L 36BK-01L
long long
36BK-02 36BK-02
short short
36BK-02L 36BK-02L
long long
36BK-03 36BK-03
short short
36BK-03L 36BK-03L
long long
35BK-04 35BK-04
short short
35BK-04L 35BK-04L
long long
35BK-05 35BK-05
short short
35BK-05L 35BK-05L
long long
35BK-06 35BK-06
short short
35BK-06L 35BK-06L
long long
36BK-04 36BK-04
short short
36BK-04L 36BK-04L
long long
36BK-05 36BK-05
short short
36BK-05L 36BK-05L
long long
36BK-06 36BK-06
short short
36BK-06L 36BK-06L
long long
Shaft Length Shaft Length
Grip Grip
1.25 [31.8] [31.8] 1.25
.63 [16.0] .75 [19.1] [19.1] .63 [16.0] --.75
1.75 [[44.5] 1.75 44.5]
.63 [16.0] 1.25 [31.8] [31.8] .63 [16.0] --1.25
2.25 [57.2] 2.25 [57.2]
.63 [16.0] [16.0] -- 1.75 .63 1.75 [44.5] [44.5]
1.25 [31.8] [31.8] 1.25
.63 [16.0] .75 [19.1] [19.1] .63 [16.0] --.75
1.75 [[44.5] 1.75 44.5]
.63 [16.0] 1.25 [31.8] [31.8] .63 [16.0] --1.25
2.25 [57.2] 2.25 [57.2]
.63 [16.0] [16.0] -- 1.75 .63 1.75 [44.5] [44.5]
1.25 [31.8] [31.8] 1.25
.63 [16.0] .75 [19.1] [19.1] .63 [16.0] --.75
1.74 [44.5] [44.5] 1.74
.63 [16.0] 1.25 [31.8] [31.8] .63 [16.0] --1.25
2.25 [57.2] 2.25 [57.2]
.63 [16.0] [16.0] -- 1.75 .63 1.75 [44.5] [44.5]
1.25 [31.8] [31.8] 1.25
.63 [16.0] .75 [19.1] [19.1] .63 [16.0] --.75
1.75 [[44.5] 1.75 44.5]
.63 [16.0] 1.25 [31.8] [31.8] .63 [16.0] --1.25
2.25 [57.2] 2.25 [57.2]
.63 [16.0] [16.0] -- 1.75 .63 1.75 [44.5] [44.5]
Rotation Rotation
Key Key Code Code
90° CW 90° CW
non-locking non-locking
90° CW 90° CW
CH751 CH751
90° CC 90° CC
non-locking non-locking
90° CC 90° CC
CH751 CH751
material: die die cast cast zinc zinc I material: achieveNEMA NEMA 12 I achieve 12and andIP64 IP64enclosure enclosureaccess accessrequirements requirementswhen whencombined combined with withescutcheon escutcheon gasket gasket sold sold separately, separately, part part no. no. 315G 315G meetsADA ADA requirements I meets requirements locking handles handlesinclude include(2) (2) ringed ringed keys keys I locking handlesare areblind-mount blind-mountand andinclude include(2) (2)8-32 8-32xx .25 .25 [6.4] [6.4] long I handles long mounting mounting screws screws all handles handles include include 3/8"-24 3/8”-24 keps I all keps nuts nuts for for the the threaded threaded shaft shaft may be be used used with with part 61 I may part number number 723 723 rod, rod, pg. pg. 61
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
39 39
Handles
SIERRA PACIFIC EM
---
Small L-Handles with Slam Bolt Bolt Latch Latch Small L-Handles with Slam
ADA
Part Part Number Number
Mount Mount
90° Rotation 90° Rotation
Locking Locking
Finish Finish
Key Key Code Code
front front
CW CW
yes yes
chrome chrome
CH751 CH751
315405 315405
front front
CW CW
no no
chrome chrome
non-locking non-locking
325205 dip 325205
blind blind
CC CC
yes yes
chrome chrome
CH751 CH751
315105 315105
C CO
patented patented
material: die die cast cast zinc zinc I material: achieve NEMA gasket sold sold I achieve NEMA 12 12 and and IP64 IP64enclosure enclosureaccess accessrequirements requirements when when combined combined with with escutcheon escutcheon gasket separately, part separately, part no. no. 315G 315G meetsADA ADA requirements I meets requirements includes dust dust shutter shutter I includes T-Handle design ►T-Handle design available, available, see see part part no. no. 350105 350105 pg. pg. 45 45 includes(2) (2) ringed ringed keys keys I includes mountingscrews screws not not supplied supplied (#10 (#10 recommended) I mounting recommended) componentsmay may be be purchased purchased separately separately I components
1.44 36.5 1.44[36.5]
2.74 69.7 2.74[69]] REF.
.217 5.50 HOLE HOLE W(TH WITH 95.217[520] .386[9130] [9.80] x 82.C.SINK 82 C'SINK 0.386 (2) PLACES
G
2.33 59.3 -.-2.33[ 58.3]
15.77] 0 .62 62 15 .531 13.48 0.531[13.48] BRASS BOLT
.750 1205] 19.05 0/50
O
1.50 38.1 t5C1 , 3Pri 2.54 64.5 4.5] CENT.
.31 7.8 .31[7.8] .63 15.9 - 0.63[152]
4.00 101.6 4.00[ 01.6]
1.74 44.2 1.74[44.2]-.-
2.11 53.7 2.11[53.7]
2.66 67.5 2.66[67.5]
Blind Blind Mount Mount L-Handles L-Handles 11
Part Part Number Number
art Mount
3101 3101 3102 3102 ►
3103 3103
90° 90° Rotation Rotation
blind blind
CC CC CW CW CC CC
3121 3121
CW CW
3123 3123
Shaft Style
Shaft Length Locking Length Locking
CW CW
3104 3104 3122 3122
min
blind blind
3124 3124
CC CC CW CW
Finish chrome chrome
3/8" -- 24 3/8" 24 thread thread
3.50 [88.9] [88.9] 3.50
3/8" -- 24 3/8" 24 thread thread
3.50 [88.9] [88.9] 3.50
yes yes
CAT60 CAT60 brushed brushed
chrome chrome
no no
non-locking non-locking brushed brushed
CC CC
material: die die cast cast zinc zinc I material: .313[7.94] [7.94] sq. sq. shaft I 313 shaft dust shutter shutter I dust (2) keys keys I (2) eachhandle handleincludes: includes:(2) (2)mounting mountingscrews, screws,(1) (1) nut, nut,(1) (1) lock lock washer I each washer gasketavailable available separately, separately, part I gasket part no. no. 312G 312G 88.9 33.50 50] 88 9
.313 .313 [7.94] [7.94] SQUARE SQUARE SHAFT SHAFT
3/8"-24 03/W-24 THREAD THREAD
1.50 38.1] 38.1 1111011111111111111111111111101111110111111111111111101111 1.50[
THREADED SQUARE SQUARE SHAFT SHAFT THREADED
3.52 89.5 3.52[89.5] 8-32 THO. THD. 8-32 (2) PLCS. PLCS. (2)
Request Info
40 40
Download 31:Immo @ Download @www.spep.com www.spep.com
Key Code
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and mnd Industrial Industri-1Hardware Hardware
Shaft Shaft Style Style
Mount Mount
Hole Hole Cent. Cent.
3301 3301
front front
1.813 [46.04] [46.04] 1.813
CW CW
4.00 [101.6] [101.6] 4.00
yes yes
chrome chrome
CH751 CH751
3302 3302
front front
1.813 [46.04] [46.04] 1.813
CC CC
4.00 [101.6] [101.6] 4.00
yes yes
chrome chrome
CH751 CH751
330206 330206
blind blind
1.500 [38.10] [38.10] 1.500
CC CC
4.00 [101.6] [101.6] 4.00
yes yes
dull dull chrome chrome
CH751 CH751
330101 330101
front front
1.813 [46.04] [46.04] 1.813
360° 360°
2.00 [50.8] 2.00 [50.8]
yes yes
chrome chrome
keyed keyed different different
330102 330102
front front
1.813 [46.04] [46.04] 1.813
CW CW
5.50 5.50 [139.7] [139.7]
yes yes
chrome chrome
keyed keyed different different
330107 330107
blind blind
1.500 [38.10] [38.10] 1.500
CW CW
4.00 [101.6] [101.6] 4.00
yes yes
dull dull chrome chrome
CH751 CH751
nonnonthreaded threaded
material: die die cast cast zinc zinc I material: .313 [7.94] [7.94] sq. I .313 sq. shaft shaft (2) keys keys I (2) mountingscrews screws not not supplied supplied I mounting gasketavailable available separately, separately, part I gasket part no. no. 330G 330G
Shaft Shaft Length Length
Locking Locking
Finish Finish
.188 [4.78] SQ. THRU 82 C'SINK x .343 8.71 (2) PLACES
Key Code Key Con
Handles
Front Front and and Blind Blind Mount Mount L-Handles L-Handles 90° 90° Rotation Rotation
Part Part Number Number
SHAFT LENGTH LSEZOTH
1.58 40.1 1.58[40.1:
XXXXX
HOLE HOLE CENT. CENT.
5.25 133.3 4.00 101.6
Blind Blind Mount Mount L-Handles L-Handles Mount Mount
90° 90° Rotation Rotation
Shaft Shaft Style Style
Shaft Shaft Length Length
Shaft Shaft Hole Hole
Locking Locking
Finish Finish
Key Key Code Code
3201 3201
blind blind
CW CW
3/8" -24 3/8" -24 thread thread
4.00 [101.6] [101.6] 4.00
no no
yes yes
chrome chrome
CH751 CH751
320103 320103
blind blind
CW CW
non-threaded non-threaded
1.56 [39.6] [39.6] 1.56
yes yes
yes yes
chrome chrome
CH751 CH751
320106 320106
blind blind
CW CW
2.50 [63.5] [63.5] 2.50
no no
yes yes
chrome chrome
CH751 CH751
320107 320107
blind blind
CW CW
3202 3202
blind blind
CC CC
320201 320201
blind blind
CC CC
320204 320204
blind blind
CC CC
3221 3221
blind blind
CW CW
322101 322101
blind blind
CW CW
3222 3222
blind blind
CC CC
322202 322202
blind blind
CC CC
Part Part Number Number
1.44 [36.6] [36.6] 1.44
no no
yes yes
chrome chrome
C415A C415A
4.00 [101.6] [101.6] 4.00
no no
yes yes
chrome chrome
CH751 CH751
non-threaded non-threaded
1.56 [39.6] [39.6] 1.56
yes yes
yes yes
chrome chrome
CH751 CH751
3/8" -24 3/8" -24 thread thread
1.44 [36.6] [36.6] 1.44
no no
yes yes
chrome chrome
C415A C415A
4.00 [101.6] [101.6] 4.00
no no
no no
chrome chrome
non-locking non- ocking
1.56 [39.6] [39.6] 1.56
yes yes
no no
chrome chrome
non-locking non- ocking
4.00 [101.6] [101.6] 4.00
no no
no no
chrome chrome
non-locking non- ocking
1.56 [39.6] [39.6] 1.56
no no
no no
chrome chrome
non-locking non- ocking
3/8” -24 thread 3/8"-24 thread
non-threaded non-threaded
3/8" -24 3/8" -24 thread thread
material: die die cast cast zinc zinc I material: achieveNEMA NEMA 12 I achieve 12enclosure enclosureaccess accessrequirements requirements when when combined with with escutcheon gasket sold sold separately combined escutcheon gasket separately (part (part no. no. 320G-01) 320G-01) stock items items available available for I stock for immediate immediate shipment shipment .313 [7.94] [7.94] sq. I .313 sq. shafts shafts handleswith with threaded threadedshafts shafts include include aa keps keps nut I handles nut mountingscrews screws not not supplied supplied I mounting handlesinclude include o-ring o-ring I handles (2) keys keys I (2)
1.70 43.3 -.-1.70{0.3.31
1.12 28.5
,r0
SHAT LENGTH-
SHAFT LENGTH
2.50 63.5
1.813 46.05
5.00 127.0 5E027E] 1.13 28.6
3.75 95.2
.125 3.18 HOLE (OPTIONAL, SEE TABLE) 10-32 THD. x .25 [6.4] DEEP (2) PLACES
.63 [16.0] - .83 [21.0]
2.13 54.0
GRIP RANGE .63SIgiPZE°1
(2) HEX NUTS
Part Number
Description Description
320209 320209
same as as part 320204 same part no. no. 320204 except with cam except with cam and and mounting mounting hardware hardware
.50 12.7
part no. 320209
CAM (2) LOCK WASHERS
(2) mounting mounting screws screws supplied I (2) supplied use with with part part no. no. 723 61 I use 723 rods, rods, pg. pg. 61 Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
41 41
CUSTOM HARDWARE HARDWARE CUSTOM SPECIALISTS SPECIALISTS
Much of of Sierra Sierra Pacific's Pacific’s revenues revenues come shown in in this this Much come from from parts parts not not shown catalog. These to customer customer specifications. specifications. catalog. These are are proprietary proprietary items items made made to
I/4
Custom Custom Handle Handle
Custom Custom Paddle Handle Paddle Handle
ibl°4411
Custom : om T-handle Latch Latch T-handle
Custom Custom Hinge with with Covers Covers Hinge
Custom Custom Draw Clamp Clamp Draw
Why Choose Choose SIERRA SIERRAPACIFIC PACIFICfor foryour yournext next custom custom hardware hardware requirement? requirement? Why •
ISO ISO 9001 9001 Certified Certified
POWERED BY
ESOP 100%
ORAC EP?
ISO 9001
EMPLOYEE-OWNED
••
Assisted by Assisted by the the latest latest CAD CAD and and FEA FEA technology. technology.
••
In-house FUSED DEPOSITION days. In-house FUSED DEPOSITIONMODELING MODELING(FDM) (FDM) allows allows us usto toconvert convert your your vision visioninto into aaprototype prototype within within days.
••
Experienced Industrial Design team ready to to assist assist with Experienced Industrial Design team ready with your your challenge. challenge.
••
We have We have satisfied satisfied the the requirements requirements of of Fortune Fortune 500 500 companies companies
klikk"1""1"1"‘"""1 \\\\\\\\\\\\\\\\\\\\\\\\\ E S NI GIE N ER E RR I N NP D PA ROC DMIC
''"i‘kOM1,0001001 00101%0001,100100110
800.433.5554 800.433.5554
[email protected] [email protected]
Hinges Hinges and and Industrial Industrial Hardware Hardware
Part Number
Material Material
Mer 65BK-01 65BK-01
die zinc die cast cast zinc
Handles
Padlocking Padlocking Handle Handle Escutcheon Escutcheon
Handle Handle Finish Finish
Material Material
Finish Finish
matte black matte black
steel with with steel plastic plastic over-mold over-mold
matte black matte black powder powder coated coated
includes cam cam &fasteners & fasteners I includes 1.26 [32' 32.0 1.26 0 GRIP 1.12 28.5 28.51 GRIP 1.12
1.30 [33.0] 33.0 1.30
.63 16.0 .63 [16.0] .669 17.00 0.669[17.00]-\
r
1.81 46.0] 46.0 1.81
29.0 1.14 [29.0] 1.14 1.73 [44.0] 44.0 1.73
44.0 1.73 [44.0] 1.73
COUNTER-CLOCKWISE COUNTER-CLOCKWISE HANDLE HANDLE ROTATION ROTATION
4.67 118.5 4.67[ 18.5] 1.73 [44.0] 44.0 1.73
1.73 [44.0] 44.0 1.73 9.00 .354 [9.00] 0.354 (3) HOLES HOLES (3) M5 THREAD M5 THREAD (3) PLACES PLACES (3)
.205 [5.20] 5.20 0.205 (3) PLACES (3) PLACES
1.12 [28.5] 28.5 1.12
MOUNTING DIMENSIONS MOUNTING DIMENSIONS FOR .04 [ 1.0 ] - .16 [4.0 [ 4.0 ]] FOR.04[1.0]-.16 PANEL PANEL THICKNESS THICKNESS
.20 5.0 -••• .20 [5.0]
Stamped Padlocking T-Handles T-Handles Stamped Padlocking Part Part 1 Rotation Material Rotation Material Number Number
301ZN 301ZN 301ZN50 oo 301ZN50
t
301SS 30155 4CIP 301SS50 3015550
Finish
Shaft Length
Shaft Shaft Style Style
Shaft Shaft Size Size
Mounting Mounting
CW CW
steel steel
zinc plated zinc plated
3.00 3.00 [76.2] [76.2]
3/8" 3/8" -- 24 24 thread thread
.313 .313 [7.94] [7.94]
front front
CCW CCW
steel steel
zinc plated zinc plated
3.00 3.00 [76.2] [76.2]
3/8" -- 24 3/8" 24 thread thread
.313 .313 [7.94] [7.94]
front front
CW CW
304SS 304SS
electropolished electropolished
3.00 3.00 [76.2] [76.2]
3/8" 24 3/8"-- 24 thread thread
.313 .313 [7.94] [7.94]
front front
CCW CCW
304SS 304SS
electropolished electropolished
3.00 3.00 [76.2] [76.2]
3/8" -- 24 24 3/8" thread thread
.313 .313 [7.94] [7.94]
front front CW CWrotation rotation shown shown
threadedshaft shafthas has aa 3/8-24 3/8-24 thread I threaded thread keyholeallows allows you you to to use use aa standard standard padlock padlock or or dual dual lock lock bracket, use of of 2 I keyhole bracket, enabling enabling the the use 2 padlocks padlocks with different X125 & & X125-01 pg. 28 with different key key codes. codes.See See part part no. no. X125 X125-01 on on pg. 28 gasketavailable available separately, separately, part I gasket part no. no. 301G 301G
1.81 46.0
3.00 .75 76.2 19.1] .75[19.1
1.81[46.0 46.0
.118 3.00 2.75 69.9
2.75 69.9 .313 7.94 SQUARE
50 38.1
.500 12.70 (2) HOLES
3.00[762 76.2
1.81 46.0
.118 3.00
3.00 76.2 .118 3.00
2.75 69.9
6 HOLE WITH ] x 82° C'SINK SIDE, (2) PLACES REAR VIEW
2.69 [683 68.3] 2.69 3/8-24 THREAD
1.42 125 36.0 1.25 31.8 [31.8 RIGHT VIEW FRONT VIEW FRONTSIDE VIEW
.500 25.4 12.70 1.00 (2) HOLES
.500 12.70 (2) HOLES
1.00 25.4 .313 [7.94 7.94] .313 SQUARE SQUARE
.236 6.00 3/8-24 THREAD BOTTOM VIEW
1.42 36.0 RIGHT SIDE VIEW FIGHTSIDEVIEW
1.50 38.1
.56 14.3 3/8-24 THREAD
REAR VIEW REARVIEW
1.50 38.1
2.69 68.3 .56 14.3
BOTTOM VIEW
.203[5.16 5.16HOLE HOLE WITH 0 203 WITH Ø.343 [8.71] x 82° C'SINK 0343 [8.71] x 82° MINK 1.42 36.0 OPPOSITE SIDE, (2) PLACES OPPOSITESIDE (2)PLACES RIGHT SIDE VIEW
.75 19.1
1.00 25.4
.19 4.7
.56 14.3 .236 6.00
.75 19.1
.313 7.94 SQUARE 1.50 [38.1 38.1] 1.50 .19 4.7
.19 4.7
.236 6.00
.75 19.1
2.69 68.3
2.69 68.3
BOTTOM VIEW BOTTOM VIEW
HOLE WITH .203.313 5.16 .203 5.16 HOLE WITH .313 [7.94] [7.94] 3/8"-24 03V-24 Ø.343 [8.71] x 82° C'SINK Ø.343 [8.71] x 82° C'SINK1.25 31.8 SQUARE SQUARE 1.25 31.8 THREAD THREAD OPPOSITE SIDE, (2) PLACES OPPOSITE SIDE, (2) PLACES SHAFT SHAFT FRONT VIEW
REAR VIEW
FRONT REAR VIEW VIEW
1.25 31.8 FRONT VIEW
THREADED SQUARE SHAFT THREADED SQUARE SHAFT
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
43 43
Handles
4141Eppf AM
-:ERING AND PP^^,,,,-*
Blind Blind Mount Mount T-handles T-handles
EW PPDDLI AMILY
Keyed Keyed
Mount Mount
90° 90° Rotation Rotation
Shaft Shaft Style Style
Shaft Length Shaft Length
360601 360601
blind blind
CW CW
3/8” 3/8"-- 24 24 thread thread
4.00 [101.6] [101.6] 4.00
CH751 CH751
chrome chrome
360610 360610
blind blind
CC CC
3/8” 3/8"-- 24 24 thread thread
4.00 [101.6] [101.6] 4.00
CH751 CH751
chrome chrome
360602 360602
blind blind
CW CW
3/8” 3/8"-- 24 24 thread thread
4.00 [101.6] [101.6] 4.00
non-locking non-locking
chrome chrome
360611 360611
blind blind
CC CC
3/8” 3/8"-- 24 24 thread thread
4.00 [101.6] [101.6] 4.00
non-locking non-locking
chrome chrome
Part Part Number Number
achieveNEMA NEMA 12 I achieve 12 and and IP64 IP64enclosure enclosure access access requirements requirements when when combined combined with with escutcheon escutcheon gasket sold separately, gasket sold separately, part part no. no. 315G 315G
material: die die cast cast zinc zinc I material: .313[7.94] [7.94] sq. sq. shaft I 313 shaft includes dust dust shutter I includes shutter
SHAFT LENGTH 90° CCW CCW 90° ROTATION ROTATION 1.
90° CW CW 90° ROTATION ROTATION
Finish Finish
(2 Keys/Lock) Keys/Lock) (2
includes: I includes: (2) screws, (2) mounting mounting screws, (1) (1) nut nut (2) keys (2) ringed ringed keys
THD. 3/8"-24 THD.
.313 [7.94] [7.94] .313 SQUARE SQUARE -1 SHAFT I SHAFT
70.0 2.76 70.0] 2.76
.63 15.9
1.44 [36.5] 36.5 1.44
3/8"-24 3/8'-24 THREAD THREAD
THREADED SQUARE SHAFT THREADED SQUARE SHAFT
1.82 [46.2] 46.2 1.82
Blind Blind Mount Mount T-Handles T-Handles
900 T
Mount Mount
90° Rotation Rotation
3601 3601
blind blind
3602 3602
blind blind
360206 alp 360206
blind blind
CC CC
360207 401) 360207
blind blind
CC CC
360203BK 360203 BK
blind blind
360204BK 360204 BK
blind blind
Part Part Number Number
Shaft Shaft Length Length
Locking Locking
Finish Finish
CW CW
4.00 4.00 [101.6] [101.6]
yes yes
chrome chrome
CH751 CH751
CC CC
4.00 [101.6] [101.6] 4.00
yes yes
chrome chrome
CH751 CH751
2.50 [63.5] 2.50 [63.5]
yes yes
brushed brushed chrome chrome
CH751 CH751
2.50 [63.5] 2.50 [63.5]
no no
brushed brushed chrome chrome
non-locking non-locking
CC CC
2.00 [50.8] 2.00 [50.8]
yes yes
matte black matte black
AH112 AH112
CC CC
2.00 [50.8] 2.00 [50.8]
no no
matte black matte black
non-locking non-locking
3/8" -24 3/8"-24 thread thread
material: die die cast cast zinc zinc I material: .313[7.94] [7.94] sq. sq. shaft I 313 shaft (2) keys keys I (2) 1.33 33.7
Shaft Shaft Style Style
(2) mounting mounting screws screws I (2) gasketavailable available separately separately as I gasket as part part no. no. 344G-01 344G-01 SHAFT SHAFT LENGTH LENGTH
1.54 39.1
.313 .313 [7.94] [7.94] SQUARE SQUARE -1 SHAFT SHAFT I XXXXX
Key Key Code Code
2.75 69.9
3/8"-24 03/8'-24 THREAD THREAD
1.50 38.1 1.50[38.1]
THREADED SQUARE SHAFT THREADED SQUARE SHAFT 8-32 8-32 THD. THD. xx .19 [4.8] [4.8] DEEP .19 DEEP (2) PLACES (2) PLACES
Front T-Handles Front Mount Mount T-Hand les 90° 90° Rotation Rotation
Shaft Shaft Style Style
Shaft Shaft Length Length
Locking Locking
Finish Finish
3501 3501
front front
CW CW
non-threaded non-threaded
4.00 4.00 [101.6] [101.6]
yes yes
chrome chrome
CH751 CH751
3502 3502
front front
CC CC
non-threaded non-threaded
4.00 [101.6] [101.6] 4.00
yes yes
chrome chrome
CH751 CH751
350104 350104
front CW front CW
3/8” -24 thread 3/8"-24 thread
2.50 [63.5] 2.50 [63.5]
yes yes
black black painted painted
CH751 CH751
.313[7.94] [7.94] sq. sq. shaft I 313 shaft I (2) (2) keys keys 1.35 34.4 1.35[34.4]
material: die die cast cast zinc zinc I material: mountingscrews screws not not supplied supplied I mounting SHAFT SHAFT LENGTH LENGTH
1.75 44.5 175[44Z]
.313 .313 [7.94] [7.94] SQUARE -1 SQUARE SHAFT SHAFT I 4.00 101.6
:=1=
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Request Info
3/8"-24 03/8'-24 THREAD THREAD
1.50 38.1 1.50[38.1]
.215[5.481 [5.46]WITH WITH 0.215 .388[9.aei [9.86] X X 82 C'SINK 0.388 82' CSINK (2) PLACES PLACES (2)
44 44
Key Key
Mount Mount
Part Part Number Number
THREADED SQUARE THREADED SQUARE SHAFT SHAFT
1-800-453-1692 www.aboveboardelectronics.com
Code Code
Hinges and Industrial Hardware Hinges mnd Indr'i Hardware
Locking Locking
Finish Finish
Key Code Key Code
Mount Mount
3701 3701
blind blind
CW CW
3.50 [88.9] [88.9] 3.50
yes yes
chrome chrome
CAT60 CAT60
3702 3702
blind blind
CC CC
3.50 [88.9] [88.9] 3.50
yes yes
chrome chrome
CAT60 CAT60
3703 3703
blind blind
CW CW
3.50 [88.9] [88.9] 3.50
yes yes
brushed brushed
CAT60 CAT60
3704 3704
blind blind
CC CC
3.50 [88.9] [88.9] 3.50
yes yes
brushed brushed
CAT60 CAT60
3721 3721
blind blind
CW CW
3.50 [88.9] [88.9] 3.50
no no
chrome chrome
non-locking non-locking
3722 3722
blind blind
CC CC
3.50 [88.9] [88.9] 3.50
no no
chrome chrome
non-locking non-locking
3723 3723
blind blind
CW CW
3.50 [88.9] [88.9] 3.50
no no
brushed brushed
non-locking non-locking
3724 3724
blind blind
CC CC
3.50 [88.9] [88.9] 3.50
no no
brushed brushed
non-locking non-locking
Shaft Style Shaft Style
3/8" 3/8" -24 -24 thread thread
Handles
Blind Blind Mount Mount T-Handles T-Handles Shaft Shaft Length Length
90° 90° Rotation Rotation
Part Part Number Number
gasketavailable available separately, separately, part I gasket part no. no. 370G 370G CAT 15 I CAT 15key keyalso alsoavailable, available,but but not not typically typically stocked stocked
material: die die cast cast zinc zinc I material: .313 [7.94] [7.94] sq. I .313 sq. shaft shaft includes dust dust shutter I includes shutter eachhandle handleincludes: includes:(2) (2) mounting mountingscrews, screws, (1) (1) I each nut, (1) lock (2) keys nut, (1) lock washer, washer, (2) keys
.92 23.5 .92[23.5]
SHAFT SHAFT LENGTH LENGTH
1.78 45.3 --x-1.78[45.3]
XXXXX
.313 .313 [7.94] [7.94] SQUARE SQUARE I SHAFT SHAFT —1 3.10 78.7 3.10[78.7]
inminmm nluninimliuiii
1.50 38.1 ] 1.58[38.1
3/8"-24 3/8'-24 THREAD THREAD
2.28 57.9 2.28[57.9]
THREADED THREADED SQUARE SQUARE SHAFT SHAFT
)11
8-32 THD. THD. xx 8-32 .27 [6.8] [6.8] DEEP DEEP .27 (2) PLACES PLACES (2)
1.18 30.0
Front Front Mount Mount T-Handles T-Handles with with Tall TallEscutcheon Escutcheon Mount Mount
90° 90° Rotation Rotation
3801-01 3801-01
front front
CW CW
3801-02 3801-02
front front
CW CW
3802 3802
front front
CC CC
Part Part Number Number
Shaft Shaft Style Style
Shaft 11- Shaft Length Length
nonnonthreaded threaded
material: die die cast cast zinc zinc I material: .313 [7.94] [7.94] sq. I .313 sq. shafts shafts includes dust dust shutter I includes shutter
lir
Locking Locking
Finish Finish
Key Code Ke yde
5.25 [133.4] 5.25 [133.4]
yes yes
chrome chrome
CH751 CH824 CH751 --CH824
3.38 [85.9] [85.9] 3.38
yes yes
chrome chrome
CH777 CH777 -- CH824 CH824
4.00 [101.6] [101.6] 4.00
yes yes
black black e-coat e-coat
CH751 CH751
(2) keys keys I (2) mountingscrews screws not not supplied supplied I mounting SHAFT SHAFT LENGTH LENGTH
2.03 51.5 2.03[51.5]
1.03 26.1 1.03[28.1]
XXXXX
1.50 38.1
3.98 101.0 3.98[ 01.0]
2.28 58.0 2.28[58.0]
Ø.215 p.48] [5.46]HOLE HOLE WITH WITH 0.215 Ø.388 P.90] [9.90] xx 82° 82° CGINK C'SINK 0.388 (2) PLACES PLACES (2) 1.15 29.2
Front Latch Front Mount Mount T-Handle T-Handle with with Slam Slam Bolt Bolt Latch Part Number Part Number
350105 350105
Mount
90° Rotation
Locking Locking
Finish Finish
Key Code Key Code
front front
CW CW
yes yes
chrome chrome
CH751 CH751
material: die die cast cast zinc zinc (2) ringed keys I (2) I material: ringed keys & components may ►L-Handle L-Handledesign design available, available, see see part part no. no. 315105 315105 & I components may be be purchased purchased separately separately 1.35 34.4 1.35[34.4] 315405 pg. pg. 40 315405 40 1.97 50.0 1.97[50x]] mountingscrews screws not not supplied supplied I mounting 90° CW 90. T-HANDLE ROTATION
.62 15.7 1.50 38.1 1.50[38.1
.531 13.48 0.531[1348] BRASS BOLT
4.00 101.6 4.00t 01.8
.750 1945] 19.05
2.22 56.4 2.22[58.4
.31 7.8 31[7.8] Ø.215 0.48] [5.46]HOLE HOLE WITH 0.215 Ø.388 [9.86] x 82° C'SINK 80 CSINK 0.388 (2) PLACES 1.74 44.2 1.74[44.2]-.2 2.66 67.5 ] .66[87.5
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.75 44.5 1.75[44.5] 2.38 60.4 2.38[80.4]
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
45
Handles
Bidirectional Compartment Compartment Latches Latches Bidirectional Part Part Number Number
.63 15.9 .63 [15.9]
6.73 .265 [6.73] 0.265 (2) (2) HOLES HOLES
.071 1.80 .071 [1.80]
•••••-
Material Materi
Finish
715 715
steel steel
zinc plated zinc plated
715SS 71555
304SS 304SS
passivated passivated
camrotates rotates 1800 180° I cam camdetents detentsevery every 90° 90° I cam canbe beused used as as left I can left hand hand or or right right hand hand
.322 [8.18] .322 [8.18] SQ. SQ. .69 17.5 .69 [17.5]
2.38 [60.3] 60.3 2.38
1.87 47.6 1.87 [47.6]
90° CW 90° CW ROTATION ROTATION
90° 90° CCW CCW ROTATION ROTATION
3.00 [76.2] 76.2 3.00
14.3 .56 .56 [14.3]
1.00 [25.4] 25.4 1.00
.35 [8.8] 8.8 -•••- .35
Center Case Case Latch Center Latch Part Number
753 753
.236 [6.00] HOLE WITH WITH 6.00 HOLE 0.236
Material Material
Finish Finish
steel steel
zinc plated zinc plated
camrotates rotates 180° 180° I cam camdetents detentsevery every 90° 90° I cam canbe beused used as as left I can left hand hand or or right right hand hand
.06 1.5 .06[1.5] OFFSET OFFSET
.77 [19.6] 19.6 .77
.39[10.0] [10.0] xx 100° 100 C'SINK C'SINK 0.39 (2) PLACES PLACES (2)
I
ACCEPTS A ACCEPTS A .313 [7.94] [7.94] SQ. .313 SQ. SHAFT SHAFT .95 [24.0] 24.0 .95
3.94 [100.0 3.94 00.0]
3.00 76.2 3.00 [76.2]
4.92 125.0 4.92 25.0]
90° CW 90° CW ROTATION ROTATION 90° 90° CCW CCW ROTATION ROTATION
.96 [24.5] 24.5 .96 .098 [2.50] 2.50 [-..-.098
1.06 [27.0] 27.0 1.06
Bi-directional Center Center Case Case Latch Sq. Shaft Bi-directional Latch for for 1/2 1/2 [13] [13] Sq. Shaft
31.8 1.25 [31.8]
66.7 2.63 [66.7]
.51 [13.0] 13.0 .51
41 11D
.118 3.00 .118 [3.00] -1
Part Number
Material Material
Finish
730-51 730-51
steel steel
zinc plated zinc plated
camrotates rotates 180° 180° I cam camdetents detentsevery every 90° 90° I cam canbe beused used as as left I can left hand hand or or right right hand hand
.511 [12.98] SQUARE SQUARE
R 6.18 157.0 6.18[ 57.0]
7.44 [189.0 89.0]
90° CW ROTATION
90° CCW ROTATION
.288 [7.32] 7.32 0.288 (4) HOLES 57.2 2.25 [57.2]
46 46
Download www.spep.com Download3DmoDELs @ @ www.spep.com
220.7 8.69 [220.7]
32.0 1.26 [32.0]
25.4 1.00 [25.4]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges and Industrial industrial Hf-rdware
Dim Dim A A
Dim Dim B
Dim Dim C
Dim Dim D
Dim Dim E
Dim Dim F
365-01 365-01
.85 .85 [21.7] [21.7]
3.81 3.81 [96.9] [96.9]
2.50 2.50 [63.5] [63.5]
.322 322 [8.18] sq [8.18] sq
Ø.67 0.67 [17.1] [17.1]
M6x1 M6x1 THD. THD.
365-02 365-02
1.18 1.18 [30.0] [30.0]
5.00 5.00 [127.0] [127.0]
3.37 337 [85.70] [85.70]
.511 .511 [13.0] sq [13.0] sq
Ø1.05 1/420 1/4-20 01.05 [26.67] THD. THD. [26.67]
A
50.00] 11.97 97 [50
D (2) PLCS.
B
material: steel finish:zinc zinc plated plated I material: steel finish: 365-01 handle attachesto to.313 .313 [7.94] [7.94] sq. I 365-01 handle attaches sq. shaft shaft by by tightening tightening included set screw included set screw 365-02 handle attaches to to.500 .500 [12.70] [12.70] shaft I 365-02 handle attaches shaft by by tightening tightening included set screw included set screw
Handles
Inside Inside Handles Handles for for Storage Storage Shed Shed Part Part Number Number
F
E
THRU ONE ONE WALL WALL THRU
C (2) PLCS. .118 3.00 THK.
Inside L-Handles Inside L-Handles
W
Part Number Material H IMMaterial
Finish Finish
Dim A Dim A
.97 24.5 0.97[24.5]
A
354 354
die cast cast zinc zinc die
hand handpolished polished1.38 [35.0] 1.38 [35.0] chrome chrome plated plated
354-01 354-01
die cast cast zinc zinc die
hand polished hand polished chrome chrome plated plated
.88 [22.4] [22.4] .88
KNURLED KNURLED CUP POINT CUP POINT SET SCREW SCREW SET
handleattaches attachestoto.313 .313[7.94] [7.94] sq. sq. shaft I handle shaft by by tightening tightening included set screw included set screw
3.46 87.8 3.0[87.8]
Light Light Duty Duty Inside Inside L-Handles L-Handles Part Part Number Number
.55 13.9 .55[13.9]
Material Material
Finish Finish
352 352
die die cast cast zinc zinc
mill mill
352CH 352CH
die die cast cast zinc zinc
chrome chrome plated plated
.75 19.1
$0,
.75 19.1 .75[19.1]
handleattaches attachestoto.313 .313[7.94] [7.94] sq. sq. shaft I handle shaft by by tightening tightening included set screw included set screw
CUP POINT CUP POINT SET SCREW SET SCREW
2.27 57.7
Steel Inside Handles Handles with withRed Red Plastic Plastic Grip Grip Steel Inside Part Part Number Number
364-01 364-01
Description Description
I
In-line (90° angle) In-line handle handle (90° angle)
364-02 364-02
1
diagonal handle handle (45° (45° angle) diagonal angle)
4.83 122.8 4.83[ 122.8]
364-01
1.02 26.0 ] 1.02[r.0
material: steel steel handle handle with with plastic plastic grip I material: grip finish: zinc grip I finish: zinc plated plated handle handle with with red red textured textured grip for use use on on handles handleswith withaa 313 .313[7.94] [7.94] sq. sq. shaft I for shaft
.79 20.0 .79[2ao]
.319 8.10 SQ. .319[8.10]
364-02 .47 12.0 .47[ 12.0]
.157 4.00 F.157[4.00]
.67 17.0 .67[ 7.0]
Cam Spacer Cam Spacer Part Material PartNo. No. Material 319 319
nylon nylon
Push-on Push-on Nut Nut Finish Finish black black
3/8" 3/8" -- 24 24 Keps Keps Nut Nut
Part Material PartNo. No. Material
Finish Finish
Part Material PartNo. No. Material
Finish Finish
359 359
black black oxide oxide
361 361
zinc zinc plated plated
steel steel
for use use on on 313 .313[7.94] [7.94] sq. I for sq. shafts shafts
A
steel steel
for use use on I for on threaded threaded .313 313 [7.94] sq. [7.94] sq. shafts shafts
.44 11.3 .44[11.3]
.875 22.23 1.06 27 27.0 .0] 01.06[
.88 22.2 0.88[22.2]
.39 9.9 .39[9.9]
A A TOP VIEW VIEW TOP
.30 7.7 SQ.
SECTION A-A SECTION A-A Request Info
.029.74] .74 THK. THK. —+—.029[
.44 11.2 0.44[11.2]
1-800-453-1692 www.aboveboardelectronics.com
.08 2.0 .08[2.0] OFFSET OFFSET
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
47 47
Handles
ilr•W BIM NEM ill„wic
ENGINEERING AND PRODUCTS
Single Point Cam Cam Single Point Part Part Number Number
2.75 69.9 2.75[69.9] 2.37 60.3 2.37[60.3]
CO
Finish Finish
steel steel
yellow zinc yellow zinc plated plated
C3 C3
C
.75 19.0
Material
for 313 .313[7.94] [7.94] sq. sq. shaft I for shaft
.63 16.0 .63[16.0]
.132 3.35 i. 132[3.35] .46 11.6 .46[11.6]
Single Point Cams Cams Single Point A A
Part Part Number Number
B
.63 15.9 .63[15.9]
Material Material
Finish Finish
A A
B
C14 C14
steel steel
C16 C16
steel steel
zinc plated zinc plated
2.00 [50.8] 2.00 [50.8]
1.63 [41.4] [41.4] 1.63
zinc plated zinc plated
3.00 [76.2] [76.2] 3.00
2.63 [66.8] 2.63 [66.8]
for.313 .313 [7.94] [7.94] sq. I for sq. shaft shaft .75 19.1 .75[19.1] .14 3.6 .14[3.6] A6[11.7] .46 11.7
Single Point Cams Cams Single Point 1/4-20 THD. 1/4-20 MID. SET SGEW SCEW SET
1.66 42.1 1.88[421]
H
Part Part Number Number
1.75 44.5 1.75[44.5]
C15 C15
20.0 0 .79 79 20.0]
C15-01 C15-01
.320 8.13 SQ. .320[8.13]50. .27 6.8 .27[6.8]
.57 14.4 ] .57[14.4
.40 10.1 .40[10.1]
Style Style
I
Material Material
Finish Finish
straight straight
die zinc die cast cast zinc
mill mill
offset offset
die zinc die cast cast zinc
zinc plated zinc plated
for 313 .313[7.94] [7.94] sq. sq. shaft I for shaft
.43 10.9 .43[10.9]
STRAIGHT GAM CAM STRAIGHT
OFFSET GAM CAM OFFSET
Roller Cam Roller Cam Part Part Number Number
.320 8.13 SQ. SQ. .320[8.13]
.95 24.2 0.95[24.2]
.71 [18.0] 18.0 0.71
697 697
Material Material
Finish Finish
die die cast cast zinc/plastic zinc/plastic
zinc/black zinc/black
for 313 .313[7.94] [7.94] sq. sq. shaft I for shaft 1.74 44.2 1.74[44.2]
.49 12.5 x82° x 82 CSINK C'SINK 0.49[12.5]
1.12 28.4 1.12[28.4] 1.10 [27.9] 27.9 1.10 .46 11.6 .46 [11.6]
.23 [5 5.88] .23
Roller Cam Roller Cam Part Part Number Number
2.24 [57.0] 57.0 2.24
697-01 697-01 .77 [19.5] 19.5 .77
.71 18.0 0.71[18.0]
Material Material
Finish Finish
304SS/plastic 304SS/plastic
passivated/black passivated/black
Material Material
Finish Finish
steel/plastic steel/plastic
zinc/black zinc/black
for 313 .313[7.94] [7.94] sq. sq. shaft I for shaft
.318 8.08 8Q SQ. 318 [8.08]
.157 [4.00] 4.00 .157 .46 11.88] 46 [11
-E
1.50 38.1 1.50[38.1]
1.12 28.4 1.12[28.4]
Roller Cam Roller Cam 2.53 64.3 253[843]
.75 19.1 .75[19.1]
Part Part Number Number _Al .70 17.7 0.70[17.7]
II
698 698
SQ. .320 8.13 ]52. 320[8.13
for 313 .313[7.94] [7.94] sq. sq. shaft I for shaft
.157 4.00] 57 [4.00 .68 17.3] 58[17.3
1.50 [38.1] 38.1 1.50
48 48
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1.43 36.3 143[38.3]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Industrial Hingesand and Indr' -i Hardware Hardware
Part Part Number Number 1 . 699 699
Material Material
Finish Finish
steel/plastic steel/plastic
zinc/natural zinc/natural
1.74 44.3
.75 19.1
.67 17.0
for.313 .313 [7.94] [7.94] sq. I for sq. shaft shaft
.320 8.13 SQ.
Handles
Roller Roller Cam Cam
.99 25.2] 1)9[252
.157 [4.00 4.00 .157 .63 15.9
F
1.13 [28.6 28.6 ] 1.13
Two Point Cam and Cover Kit Kit Two Point Cam and Cover Part Part Number Number
Material Material
Finish
steel steel
zinc plated zinc plated
C4-01 C4-01
for.313 .313 [7.94] [7.94] sq. I for sq. shaft shaft use with with part part no. no. 723 723 rods, 61 I use rods, pg. pg. 61 camand andcover cover kits kits are are shipped shipped separately separately in in bulk bulk I cam
1.09 27.83 im[27.1
.63 16.0 63[16.0]
1.47 37.3
1.47 37.3 1.47[373
.098 2.50
.047 1.20 .047[120]i
.19 4.8 F.19[4.8]
.31 7.8 31[7.81
T
Three Point Point Cam Cam and and Cover Cover Kit Kit Three Part Part Number Number
Length Length
Material Material
Finish Finis-
C8-01 C8-01
2.50 [63.5] [63.5] 2.50
steel steel
zinc plated zinc plated
C8-02 C8-02
2.13 [54.1] [54.1] 2.13
steel steel
zinc plated zinc plated .50 12.7
for.313 .313 [7.94] [7.94] sq. I for sq. shaft shaft use with with part part no. no. 723 723 rods, 61 I use rods, pg. pg. 61 camand andcover cover kits kits are are shipped shipped separately separately in in bulk bulk I cam
.63 16.0 .69[16.0]
LENGTH
1
1.41 35.8 1.41[950]
1.41 35.8
.098 2.49
.047 1.19 047[1.19],
.31 7.8
.19 4.8 19118.[
7-1
Three Point Cams Three Point Cams
Ml Part Number
Length Length
Thickness Thickness
Material Material
Finish Finish
C21 C21
1.50 [38.1] [38.1] 1.50
.157 [4.00] [4.00] .157
steel steel
zinc plated zinc plated
C22 C22
2.25 [57.2] 2.25 [57.2]
.189 [4.80] [4.80] .189
steel steel
zinc plated zinc plated
i
ii.
LENGTH LENGTH
1.89 48.0 1.8.9[48.o]
1.47 37.3 1.47[37.3]
1100,13.01
for.313 .313 [7.94] [7.94] sq. I for sq. shaft shaft usewith with part partno. no. 723 723 rods, rods, pg. pg. 6 61 I use camcover cover available, available, part C5 I cam part no. no. C5 .37 9.4 .37[9.4]
I
.30 7.6 .30[7.0]
I THICKNESS THICKNESS
Three Point Point Cam Cam Kit Kit Three Part Part Number Number
C11-01 C11-01
Material Material
Finish Finish
die cast zinc die cast zinc
zinc plated zinc plated
1.63 41.3 1.63[41.3]
A
A A 1.41 35.8 1.41[35.8]
for.313 .313 [7.94] [7.94] sq. I for sq. shaft shaft use with with part part no. no. 723 723 rods, 61 I use rods, pg. pg. 61
1.41 35.8 1.41[35.8]
TOP TOP VIEW VIEW CAM
TOP M.11EIN F VIEW COVER COVER .07 1.9 S F.07[1
.26 6.6 .2616.61-i
.116 2.95 .111312.95 .37 9.3 37[93]
SECTION A-A A-A SECTION
FRONT VIEW FRONTVION CAM
COVER
1.13 28.6 1.13[28.6]
.72 18.3 .72[18.3]
.54 13.6 .54[13.6] .32 8.2 SQ. SQ. .32[8.2]
(0) SQ. .32 8.2 SQ.._t .32[8.2]
BOTTOM VIEW BOTTOM VIEW
CAM
Request Info
1-800-453-1692 www.aboveboardelectronics.com
BOTTOM VIEW BOTTOM VIEW COVER COVER
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
49 49
Latches
SIEP"1 PACIFIC EP -
-ERING AND PROP""
---
Two-Point Standard Two-Point Standard Paddle Paddle Handles, Handles, Flush Flush Mounted Mounted 4.25 [108.0] 1.96[49.8] [49.8] - 1.96
2.79 [70.9]
.91 [23.1)[23.1] -.91
1.59 [40.4]
Ø.193 [4.90] 0.193 (4) HOLES
3.33 [84.6] 84.6 3.33 V
.250 [6.35] [6.35]
3.75 [95.3]
5.50 [139.7] 5.50 39.7]
4.60 [116.8] 116.8 4.60
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
3.81 [96.8]
RIGHT RIGHT SIDE SIDE VIEW VIEW
BACK BACK VIEW VIEW
Mounting Mounting Holes Holes
Material Material
Finish Finish
471 471
Part Part Number Number
no no
steel steel
electro-galvanized electro-galvanized
473 473
yes yes
304SS 304SS
polished polished
slide bar paddlehandle. handle.See See pg. pg. 68 68 for for details ►slide bar latches latches may may be be used used with with two-point two-point standard standard paddle details see page page 61 61 for for rod ►see rod ►lock lock sold sold separately separately (see (see available available codes codes below) below) Available Key Key Codes Available Codes Part Part Number Number
Key Key Code Code
PMCH545 PMCH545
CH545 CH545
PMSP1 PMSP1
SP1 SP1
Accessories (Sold (Sold Separately) Accessories Separately) Part Part Number Number
450G 450G
Description Description
Material Material
Finish Finish
standard paddle paddle handle handle gasket gasket standard
neoprene neoprene
black black
Description Description
Material Material
Finish Finish
Part Part Number Number
4ZN 4ZN
inside inside release release ring ring
steel steel
zinc plated zinc plated
4SS 455
inside inside release release ring ring
316SS 316SS
passivated passivated
for junior ►for junior paddle paddle handles handles only only
Part Part Number Number
4PL 4PL
Description Description
Material Material
Finish Finish
inside inside release release knob knob
plastic plastic
zinc plated zinc plated
for junior ►for junior and and standard standard paddle paddle handles handles .500 [12.70] [12.70] xx .228 [5.79] .500 .228 [5.79] (2) obrounds (2) obrounds
Part Part Number Number
Description Description
Material Material
Finish Finish
striker striker
sand cast cast steel steel sand
zinc plated zinc plated
40ZN 40ZN
3.0 [76]
for junior ►for junior and and standard standard paddle paddle handles handles
.9 [22]
2.2 [56]
Request Info
50 50
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hinges mnd Indr•ctrial Hardware Hardware
1.72 [43.7] 43.7 ►
108.0 4.25 [108.0]
.91[23.1] .91 23.1
3.33[84.6] 84.6 -3.33
10.3 .41 [10.3]
see see pg. pg. 50 50 for inside inside for release options release options
4.60 [116.8] 116.8 4.60
5.50 [139.7 3.75 [95.3] 95.3 5.50 39.7] 3.75
.193 [4.90] 4.90 0.193 (4) HOLES
35.6 1.40 [35.6]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
96.8 3.81 [96.8]
RIGHT SIDE VIEW RIGHT SIDE VIEW
Part Part Number Number
Latches
Standard Paddle Standard Paddle Handles Handles with with Inside Inside Release Release
BACK SIDE SIDE VIEW BACK VIEW
Locking Locking or or Non-locking Non-locking
Mounting Holes Mounting Holes
Material Material
Finish Finish
460 460
non-locking non-locking
no no
steel steel
electro-galvanized electro-galvanized
460H 460H
non-locking non-locking
yes yes
steel steel
electro-galvanized electro-galvanized
461* 461*
locking locking
no no
steel steel
electro-galvanized electro-galvanized
461NR 461NR
locking locking
no no
steel steel
electro-galvanized electro-galvanized
461H* 461H*
locking locking
yes yes
steel steel
electro-galvanized electro-galvanized
461HNR 461HNR
locking locking
yes yes
steel steel
electro-galvanized electro-galvanized
462 462
non-locking non-locking
yes yes
304SS 304SS
hand polished hand polished
463* 463*
locking locking
yes yes
304SS 304SS
hand polished hand polished
463NR 463NR
locking locking
yes yes
304SS 304SS
hand polished hand polished
469* 469*
locking locking
threaded studs threaded studs
304SS 304SS
hand polished hand polished
469NR 469NR
locking locking
threaded studs threaded studs
304SS 304SS
hand polished hand polished
holes for for inside inside release shown on on pg. pg. 50 50 (sold (sold separately) (*)these these handles handles have have threaded threaded holes release option option shown separately) ►(*) flush mounted ►flush mounted of die die cast cast zinc zinc ►bolts bolts are are made made of cam locks below) ►cam locks are are sold sold separately separately (see (seestandard standard paddle paddle handle handle tables tables below)
Lock Lock Sold Sold Separately Separately for for Standard Standard Paddle Paddle Handles Handles Available Key Key Codes Available Codes
Available Key Key Codes Available Codes Part Part Number Number
Key Key Code Code
Part Part Number Number
Key Key Code Code
PNBH034 PNBH034
BH034 BH034
PNCH509 PNCH509
CH509 CH509
PNCH501 PNCH501
CH501 CH501
PNCH510 PNCH510
CH510 CH510
PNCH502 PNCH502
CH502 CH502
PNCH545 PNCH545
CH545 CH545
PNCH503 PNCH503
CH503 CH503
PNLL72 PNLL72
LL72 LL72
PNCH504 PNCH504
CH504 CH504
PPNSP1 PPNSP1
SP1 SP1
PNCH507 PNCH507
CH507 CH507
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
51 51
Latches
SIERRA PACIFIC ENGINEERING -", PROD" -
Junior Paddle Inside Release Release Junior Paddle Handles Handles with with Inside Part Part Number Number Standard Bolt Standard Bolt
co
Part Part Number Number Flat Flat Bolt Bolt
Locking Locking or or Non-locking Non-locking
Mounting Mounting Holes Holes
Material Material
Finish Finish
404 404
404A 404A
non-locking non-locking
no no
steel steel
electro-galvanized electro-galvanized
404H 404H
404AH 404AH
non-locking non-locking
yes yes
steel steel
electro-galvanized electro-galvanized
non-locking non-locking
yes yes
steel steel
matte black matte black
locking locking
no no
steel steel
electro-galvanized electro-galvanized
locking locking
yes yes
steel steel
electro-galvanized electro-galvanized
locking locking
no no
steel steel
pre-coat pre-coat
404H02 404H02
---
405 405
405A 405A
405H 405H
405AH 405AH
40502 611P 40502
---
USWO40502ZN 40502ZN
---
407 407
407A 407A
408 408
408A 408A
40801 40801
---
locking locking
no no
steel steel
zinc plated zinc plated
locking locking
yes yes
304SS 304SS
hand hand polished polished
non-locking non-locking
yes yes
304SS 304SS
hand hand polished polished
non-locking non-locking
no no
304SS 304SS
brushed brushed
,r1 SP1key keycode codesupplied suppliedunless unlessotherwise otherwisespecified specified(see (see additional additional key key codes codes tables tables below) below) A latch latch retaining retaining clip clip included included handles can can be 1 handles be used used with with an an optional optional inside inside release releaseto toallow allowhandle handleto to be beopened openedfrom from interior interior of of enclosure, see pg. enclosure, see pg. 50 50 electro-galvanizedsurface surface allows allows better better paint paint adhesion adhesion than than aa zinc zinc plated plated surface surface 1 electro-galvanized all bolts boltsare are made made of of die die cast cast zinc 1 all zinc neoprene gasket gasket available available (part 400G) 1 neoprene (part no. no. 400G) suggestedcut-out cut-outhole: hole:2.75 2.75[69.9] [69.9]xx 3.88 3.88 [98.6] [98.6] I suggested
latch .4- latch retaining retaining clip clip
Junior Paddle AdditionalKey Key Codes Codes Available Junior Paddle Handle Handle Additional Available Upon Upon Request Request Available Key Key Codes Available Codes Part Part Number Number
part no. part no. 40502 40502 40502ZN 40502ZN 40801 40801
Key Key Code Code
Part Part Number Number
Key Key Code Code
PLSCH509 PLSCH509
CH509 CH509
PLSCH501 PLSCH501
CH501 CH501
PLSCH510 PLSCH510
CH510 CH510
PLSCH502 PLSCH502
CH502 CH502
PLSCH545 PLSCH545
CH545 CH545
PLSCH503 PLSCH503
CH503 CH503
PLSCH751 PLSCH751
CH751 CH751
PLSCH504 PLSCH504
CH504 CH504
SP1 SP1
PLSCH507 PLSCH507
CH507 CH507
PLSSP1 PLSSP1
.88 22.2 ] .88[22.2
3.63 92.1 ] 3.63[ 92.1
Available Key Key Codes Available Codes
120° 120°
.88 22.2 22.2 ] .88[
120° 120°
see pg. see pg. 50 50 for inside for inside release options release options
.48 12.3 ] .48[12.3
0.0 2.75 [69.9] 69.9 2.75
3.00 76.2 76.2 ] 3.00[
4.75 120.7 120.7 ] 4.75[ 3.00 [76.2] 76.2 3.00 CENT. CENT.
3.19 81.0 3.19[81.0]
.193 4.90 0.193[4.90] (4) HOLES HOLES (4)
FRONT VIEW FRONT VIEW
M-M
.81 20.5 .81] 20.5
.81 20.5 ] .81[20.5
RIGHT VIEW RIGHT SIDE SIDE VIEW STANDARD BOLT STANDARD BOLT
.193 4.90 Ø.193[4.90] (4) (4) HOLES HOLES
RIGHT VIEW RIGHT SIDE SIDE VIEW FLAT FLAT BOLT BOLT
Request Info
1-800-453-1692 www.aboveboardelectronics.com
52 52
Download 31)moDELs @ @www.spep.com www.spep.com Download
3.88 [98.6] 98.6 3.88
3.19 [81.0] 81.0 3.19 CENT. CENT. MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Hinges and Industrial Hardware Hinges mnd Indr'i Hardware
Material Material
Finish Finish
Mounting Mounting Holes Holes
Key Code Key Code
457 457
430SS polished polished non-locking non-locking 430SS
457-501 457-501
430SS polished yes 430SS polishedCH501 CH501 yes
457-545 457-545
430SS polished yes 430SS polishedCH545 CH545 yes
.17 4.3 .17[4.3]
3.05 77.5 3.05[77.5]
R.39 10.0 MAX. MAX. R.39[10.0] (4) PLACES PLACES (4)
yes yes
additionalkey keycodes codes available available with order I additional with minimum minimum order quantities quantities lockinglatches latchesinclude include(2) (2) ringed ringed keys keys I locking gasketavailable available (part (part no. 457G) I gasket no. 457G)
R.55 14.0 .55[14.0] 2.87 72.9 2.87[72.9] CENT. 2.56 65.0 CENT. 2.56[65.0] SQUARE SQUARE
Latches
Cam Latching Cam Latching Stainless Stainless Steel Steel Paddle Paddle Handles Handles Part Part Number Number
1.94 49.3
1.10 28.0 1$4[49.3] 1.10[28.0] CENT. CENT.
CUT CUT OUT OUT FOR FOR LOCKING ONLY LOCKING ONLY .201 5.11 0.201[5.11] (4) HOLES HOLES (4)
.72 18.3 72[183] MOUNTING DIMENSIONS DIMENSIONS MOUNTING
111.0 4.37 [111.0]
3.05 [77.5] 77.5 3.05
1.53 38.9 1.53 [38.9] .118 [3.00] 3.00 .118
18.0 .71 [18.0]
60.2 2.37 [60.2] CENT. CENT.
3.27 83.0 3.27 [83.0]
.207 [5.25] 5.25 0.207 (4) HOLES
13.1 .52 [13.1]
.050 1.3 .050[1.3]
FRONT VIEW FRONT VIEW
1.94 [49.3] 49.3 1.94 CENT. CENT.
72.9 2.87 [72.9] CENT. CENT.
2.37 60.2 2.37[60.2]
18.7 .74 [18.7]
.440 [11.16] 11.16 HOLE HOLE FOR FOR 0.440 ROD GUIDE BELOW (PART NO. (PART NO. 458) 458)
RIGHT SIDE SIDE VIEW RIGHT VIEW
.260 [6.60] 6.60 0.260 HOLE REAR VIEW REAR VIEW
Rod Guide Set Screw Screw Rod Guide with with Set Part Number Part Number
458 458
Material Material
Finish Finish
die cast cast zinc die zinc
yellow zinc zinc yellow
18.0 .71 [18.0] .622 15.80
.16 4.1 18[4.1]
.124 [3.15] 3.15 .124 ACROSS FLATS FLATS ACROSS DEEP x .148 .148[3.76] p.m DEEP
includessteel steelset set screw screw I includes used on on part part no. 457-545 I used no. 457, 457, 457-501 457-501 and and 457-545
.425 10.80 x .425`10.80[ CENT. C T. T
1/4-20 THD.
.37
.256 [8.50] 6.50 THRU THRU HOLE HOLE 0.25e
FRONT VIEW FR I•T'VIMN
THD. 1/4-20 THD. SET SET SCREW SCREW
RIGHT SIDE RIGHT SIDE VIEW VIEW
304SS Small Brushed Finish Finish 304SS Small Paddle Paddle Handles Handles with with Brushed Grip Range Grip Range (min. - max.) max.) (min.-
B B
Cut-out Dim Dim C C Cut-out (min. - max.) max.) (min.-
454SS01 4545501
.05 [1.2] .08 [2.0] .05 [1.2] --.08 [2.0]
.45 [11.5] .45 [11.5]
.41 [10.4] .50 [12.7] [12.7] .41 [10.4] --.50
454SS02 4545502
.08 [2.0] .11 [2.8] .08 [2.0] --.11 [2.8]
.48 [12.0] .48 [12.0]
.44 [11.2] .53 [13.5] [13.5] .44 [11.2] --.53
454SS03 4545503
.11 [2.8] [2.8] -- .14 .11 .14 [3.6] [3.6]
.48 [12.0] .48 [12.0]
.47 [11.9] .56 [14.2] [14.2] .47 [11.9] --.56
454SS 45455
.14 [3.6] .16 [4.1] .14 [3.6] --.16 [4.1]
.54 [13.8] .54 [13.8]
.35 [9.0] -.39 - .39 [10.0] [10.0] 35 [9.0]
Part Number Part Number
includesmounting mountingbracket bracket and and nylon nylon lock lock nut I includes nut lowprofile profile design design I low
.47 [12.0] 12.0 .47
GRIP RANGE RANGE Imo- GRIP
.96 [24.3] 24.3 .96
B
1.87 [47.5] 47.5 1.87
C FRAME
2.20 [56.0] 56.0 2.20
.79 M4 THD.
1.40 35.5] 35.5 1.40
e
R.08 2.0 MAX MAX. R.08[2.0] (4) PLACES PLACES (4)
1.65 42.0 1.65[42.0] FRONT VIEW VIEW FRONT
WITH MOUNTING WITH MOUNTING BRACKET BRACKET
.04 -- .14 .14 PANEL PANEL .04 THICKNESS THICKNESS RIGHT SIDE SIDE VIEW RIGHT VIEW
WITH MOUNTING MOUNTING BRACKET WITH BRACKET
.04 1.0 .04[1.0]
.46 [11.6] 11.6 .46 DOOR DOOR
RIGHT SIDE SIDE VIEW VIEW RIGHT
WITHOUT WITHOUT MOUNTING MOUNTING BRACKET BRACKET MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
53 53
Latches
SIERRA PACIFIC EP, --rERING AND PRODUCTS Large Paddle Large Paddle Handles Handles Material Material
Finish Finish
Key Code Key Code
466BK 466BK
Part Number Part Number
steel steel
black black powder powder coated coated
non-locking non-locking
466BK-LK 466BK-LK
steel steel
black black powder powder coated coated
K160 K160
suggested cut-out cut-out hole:4.25 hole: 4.25[108.0 [108.0xx 3.25 3.25 [82.6] [82.6] ►suggested
1.13 [28.6] 28.6 1.13
.47 12.0 .47 [12.0]
9.5 .37 [9.5]
3.25 82.6 3.25 [82.6]
.57 14.5 .57 [14.5]
Av
4.25 108.0 4.25 [108.0]S
5.00 127.1
4.00 101.5
47.5 1.87 [47.5] 1.87
FRONT VIEW FRONT VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Medium Paddle Paddle Handles Handles Medium Material Material
Finish Finish
Key Code Key Code
465BK 465BK
Part Number Part Number
steel steel
black black powder powder coated coated
non-locking non-locking
465BK-LK 465BK-LK
steel steel
black black powder powder coated coated
K160 K160
suggested cut-out cut-outhole: hole:2.81 2.81 [71.4] [71.4] xx 2.19 2.19 [55.6] ►suggested [55.6]
.75 19.1 .75 [19.1]
.31 7.8 .31 [7.8]
0 C
.37 9.5 .37 [9.5]
.39 10.0 .39 [10.0]
2.19 [55.6] 55.6 2.19
2.81 [ 71.4 2.81 71.4]
3.31 [84.2] 84.2 3.31
7
2.69 [68.2] 68.2 2.69
►
FRONT VIEW FRONT VIEW
1.42 [36.1] 36.1 1.42 RIGHT SIDE SIDE VIEW RIGHT VIEW
Request Info
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
1-800-453-1692 www.aboveboardelectronics.com
54 54
Download www.spep.com Download3DmoDELs @ @ www.spep.com
Hingesand andIndustrial Industrial Hardware Hardware Hines
Material Material
Finish Finish
Key Locking Key Locking
steel steel
zinc plated black powder zinc plated then then black powder coated coated
no no
467BK-01 467BK-01
accepts up padlock ►accepts upto to 5/16" 5/1e padlock
1.33 33.7 1.33[33.7]
.313 [7.94] 7.94 0.313 (4) HOLES HOLES (4)
4.25 [108.0] 108.0 4.25
.79 20.1 .79[20.1]
.05 [1.2] 1.2 .05
3.70 [94.0] 94.0 3.70
Latches
PaddleHandle Handlewith withPadlock Padlock Tab Tab 411) Paddle Part Number Part Number
94.0 3.70 [94.0] 3.70
O
II
5.50 [139.7 5.50 39.7]
.29 7.5
4.31 109.5
3.94 100.0
.343 [8.70] 8.70 0.343 HOLE HOLE
3.94 [100.0 3.94 00.0]
p rf
3.31 [84.1] 84.1 3.31
M6 THD. THD. M6 (4) PLCS. PLCS. (4)
.57 [14.5] 14.5 .57
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
FRONT VIEW FRONT VIEW
REAR VIEW REAR VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
Paddle Handles Tab Paddle Handles with with Padlock PadlockTab Part No. Part No.
Cam Lock Key Code Code Cam Lock// Key
Mounting Mounting Holes Holes
black black powder powder coated coated
none none
yes yes
black black powder powder coated coated
CH751 CH751
yes yes
Material Material
Finish Finish
474 474
steel steel
474-CH751 474-CH751
steel steel
catch allows allows for for door door and and frame frame flexing on off-road off-road and and agricultural agricultural vehicles vehicles ►pivoting pivoting catch flexing on spring loaded ►spring loaded components components prevent prevent vibration vibration reverse paddle ►reverse paddle design design allows allows for for use useon ontop top hinged hinged doors doors non-locking latch latch has has aa knockout ►non-locking knockout covering covering hole hole accepts up ►accepts up to to 3/8" 3/8" padlock padlock 3.82 [97.0] 97.0 3.82
4.5
3.82 97.0
114.5 4.51 [114.5]
84.1 3.31 [84.1] 3.31
7.7
1.17 29.7 1.17[29.7]
A
3.31 84.1
3.06 [77.7] 77.7 3.06
.346 [8.80] 8.80
A
.213 5.41 0.213[5.41] (4) PLACES PLACES (4)
.213 5.41 (4) PLACES
22.2 .87 [22.2]
.402 [10.20] 10.20 HOLE HOLE 0.402 (NO TAB TAB ON ON PART PART NUMBER 478*) 478.) 4.28 108.7
4.50 [114.3 4.50 14.3
3.75 95.3] 95.3 3.75
6.38 [162.0 6.38 62.0]
3.75 [95.3] 95.3 3.75
4.28 108.7 4.28[ 08.7]
4.50 114.3
3.75 95.3
1.00 [25.4] 25.4 1.00
A
1.14 29.0 1.14[29.0]
.201 5.10 (4) HOLES
KNOCKOUT FOR NON-LOCKING
7.0
1.03 26.2 1.03 [26.2]
E VIEW
.201 5.10 0.201[5.10] (4) HOLES HOLES
L►A A
OPTIONAL LOCK OPTIONAL LOCK CUT-OUT FOR CUT-OUT FOR 474-CH751 PART NO. 474-CH751
2.56 [65.1] 65.1 2.56
KNOCKOUT KNOCKOUT FOR NON-LOCKING NON-LOCKING FOR
3.82 [97.0] 97.0 3.82
SECTION A-A SECTION A-A
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
1.14 29.0
BACK SIDE SIDE VIEW VIEW BACK
OPTIONAL LOCK CUT-OUT FOR PART NO. 474-CH751
1.03 26.2
MOUNTING DIMENSIONS
Paddle Handles Handles with with No No Padlock Padlock Tab Tab Paddle Part No. Part No.
Material Material
Finish Finish
Cam Lock // Key Cam Lock Key Code Code
Mounting Holes Holes Mounting
478 478
steel steel
black black powder powder coated coated
none none
yes yes
478-01 478-01
steel steel
black black powder powder coated coated
CH751 CH751
yes yes
catch allows allows for for door door and and frame frame flexing on off-road off-road and and agricultural agricultural vehicles vehicles ►pivoting pivoting catch flexing on spring loaded ►spring loaded components components prevent prevent vibration vibration reverse paddle ►reverse paddle design design allows allows for for use useon ontop top hinged hinged doors doors non-locking latch latch has has aa knockout ►non-locking knockout covering covering hole hole 4.49 114.0
3.90 [99.0] 99.0 3.90
3.90 99.0
3.10 78.8
3.31 [84.1] 84.1 3.31
1.22 31.0
.35 8.8
.250 [6.35] 6.35 0.250 (4) PLACES PLACES (4)
.250 6.35 (4) PLACES
.72 18.3 .72[18.3]
4.00 101.6 4.00[101.6]
4.33 110.0 4.50 [114.3 4.50 14.3]
4.00 [101.6 4.00 01.6]
3.31 84.1
A
4.33 110.0 4.331 10.0]
7.05 179.0
4.50 114.3
4.00 101.6
.89 22.5] 22.5 .89 .217 5.50 (4) HOLES KNOCKOUT FOR NON-LOCKING
.217 5.50 0.217[5.50] (4) HOLES HOLES (4)
1.14[29.0] 1.14 29.0
1.03 26.2 1.03[26.2]
OPTIONAL LOCK LOCK OPTIONAL CUT-OUT CUT-OUT FOR FOR PART NO. NO. 474-CH751 474-CH751 PART
2.56 65.0
SECTION A-A SECTION A-A
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Request Info
1-11,-- A
1.18 30.0
1-800-453-1692 www.aboveboardelectronics.com
3.90 199.01 99.0 3.90
REAR VIEW VIEW REAR
KNOCKOUT KNOCKOUT FOR NON-LOCKING NON-LOCKING FOR
1.14 29.0
1.03 26.2
OPTIONAL LOCK CUT-OUT FOR PART NO. 474-CH751
MOUNTING DIMENSIONS
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
55
Latches
SIERRA PfilIFIC EM ---rERING AND ,---nucTs
Two-Point Flush Flush Paddle Two-Point Paddle Handle Handle Part Number Part Number
402 402
Material Material
Finish Finish
steel steel
semi-gloss semi-gloss black black powder powder coated coated
foruse usewith withrod rodor orcable cable system system I for (see page rods and and accessories) accessories) (see page 61 61 for for rods
co
.200 [5.08] 5.08 0.200 (4) PLACES
3.00 76.2 3.00 [76.2]
4.69 119.1 4.69[119.1] .048 1.22 ] .048[1.22
3.28 83.3 MAX. MAX. 3.28[83.3]
1.72 43.7 1.72[43.7] 1.63 [41.3] 41.3 MIN. MIN. 1.63
L .250 6.35 L 0.250[6.35] (2) PLACES PLACES (2)
3.63 92.1 3.63[92.1]
.193 93[ 4.90 4.90 ] 0 .1
.81 20.6
3.19 81.0 3 2.58 65.5 2.58[65.5].19 [81.0]
3.19 81.0 3.19[81.0]
(4) HOLES HOLES (4)
SIDE VIEW SIDE VIEW
71.1 2.80 [71.1]
3.00 76.2 ] 3.00[ 76.2
4.00 101.6 4.00[101.6]
3.58 90.9 3.58[90.9]
MOUNTING DIMENSIONS
REAR VIEW REAR VIEW
Plastic Paddle Plastic Paddle Handle Handle with with Keeper Keeper Part Number Part Number
Material Material
468P 468P
plastic plastic
Cam Lock Lock Cam
Mounting Mounting
Key Key Code Code
Holes Holes
CH751 CH751
see see note note
includessecondary secondary release release for I includes for additional additional security security handlemounts mountsfrom fromthe theback backwith with(4) (4) mounting mountingscrews screws (included) I handle (included)
.56 14.2 56 [14.2] .394 [10.01] 10.01 0.394 (2) HOLES
2.76 [70.0] 70.0 -0-2.76 -0-
FRAME RAME .56 14.1
3.92 99.6 135° .54 13.7
34.5 1.36 [34.5]
.29 7.4
3.39 86.0 3.39 [86.0] -0.20 5.0 20 [5.0]
4.02 [102.0 102.0]
5.10 129.5
4.03 102.3
3.62 [92.0] 92.0 3.62
2.0 .08 [2.0]
MOUNTING SCREW (4) PLACES
1.17 29.6
DOOR .945 24.00 0.945[24.00] HOLE
2.95 [75.0] 75.0 0.-
.433 11.00 0.433[11.00] (4) HOLES
SIDE VIEW
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Request Info
1-800-453-1692 www.aboveboardelectronics.com
56 56
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
2.95 75.0 REAR VIEW
Hinges Industrial Hingesand and Indr' -i Hardware Hardware
Material Finish Holes Holes Material Finish
491 491 491SS 49155
DI
Pan Pan Thickness Thickness
steel steel
zinc zinc plated plated
yes yes
18 gauge 18 gauge
304SS, 304SS, pan only pan only
polished polished
yes yes
18 gauge 18 gauge
Latches
Single Point T-Handles T-Handles Single Point Part Part Number Number
n
360° handle handle rotation rotation I 360° diecast cast zinc zinc handle I die handle
.047 1.20 .047] 1.201-.-
5.50 139.7
2.36 59.9
.047 1.20
5.50 139.7 5.50[139.7]
5.12 130.0
2.36 59.9
.195 4.95 (4) HOLES
4.52 114.8
4.25 4.25[108.0 08.0]
2.69 68.3
2.69 68.3
4.25 108.0
2.69 68.3 2.69[68.3]
3.30 83.8
.313 7.95 .313[7.95] SQUARE SQUARE .313 7.95 SQUARE
R.25 6.4 MAX. (4) PLACES
.195 4.95 (4) HOLES .195 4.95 0.195[4.95] (4) HOLES (4) HOLES
5.12 130.0
.87 22.2 .87[22.2] .87 22.2
5.12 130.0 5.12[130.0]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Single Point Folding Folding T-Handle T-Handle Single Point Part Part Number Number
495-01 495-01
Material Material
Finish Finish
304SS pan 304SS pan
deburred deburred
diecast cast zinc zinc handle I die handle 18 gauge gauge pan pan I 18 includes mounting mounting hardware hardware I includes acceptsup upto to3/8" 3/8" padlock padlock I accepts
1.83 46.5 .87 22.1 5.50 [139.7] 139.7 5.50
.047 1.2
.281 7.1 (4) HOLES
4.69 119.1
5.9 .23 .23 [5.9]
.442 11.2 .442[11.2] FLATS FLATS
1.38 34.9 1.38 [34.9] .590 [15.0] 15.0 0.590 3.26 82.8
1.12 28.6 1.12 [28.6]
3.46 87.8
4.27 4.27 [108.4 08.4] 1/4-20 THD. 1/4-20 THD. (4) (4) STUDS STUDS
4.53 115.1
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
RIGHT VIEW RIGHT SIDE SIDE VIEW
FRONT FRONT VIEW
REAR VIEW REAR VIEW
4.50 114.3 1.12
Single Point Point Padlocking Padlocking T-Handles T-Handles Single Part Part Number Number
Material Finish Material // Finish
Mounting Mounting Holes Holes
steel //zinc zinc steel
no no
304SS pan 304SS pan only only// polished polished
yes yes
481P 481P 481PSS 481P55
.394 10.00 0.394[10.00] (2) HOLES (2) HOLES
A VIEW A-A VIEW A-A
.193 4.90 (4) HOLES
FRONT VIEW 1.04 26.3 1.04[26.3]
4.50 114.3 4.50[ 114.3]
3.69 [93.7] 93.7 3.69 -.-
1.12 28.5
.394 10.00 (2) HOLES
3.50 88.9 10[88.9]
3.19 81.0 3.19[81.0]
A A 3.00 76.2 3.00[76.2]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
VIEW A-A
Request Info
3.19 81.0
3.00 76.2
18 gauge gauge pan pan thickness thickness I 18 die cast cast handle handle I die accepts up up to padlock I accepts to 5/16" 5/1e padlock
2.69 [68.3] 68.3 2.69
3.50 88.9
FRONT VIEW FRONT VIEW
1-800-453-1692 www.aboveboardelectronics.com
.193 4.90 0.193[4.90] (4) HOLES (4) HOLES
.83 21.1 RIGH VIEW HIGH SIDE SIDE VIEW
To Place 800.433.555411111
[email protected] To PlaceOrder: Order ta 800.433.5554
[email protected]
57 57
Latches
PACIFY' -VGINEr- AND PRODUCTS
Single Point Folding Folding T-Handles T-Handles Single Point Part Part Number Number
Key Key Code Code
486RH-01 486RH-01
non-locking non-locking
486LH-01 486LH-01
non-locking non-locking
486RH-751 486RH-751
CH751 CH751
486LH-751 486LH-751
CH751 CH751
Finish Finish matte black powder matte black powder coated coated
zinc plated zinc plated
material: steel steel I material: locking part partnumbers numbersinclude includecam camlock lock with with I locking (2) (2) ringed ringed keys keys camhas hasmultiple multiple holes holes for for optional optional multi-point multi-point installation installation I cam
20.6 .81 [20.6]
90° 90° ROTATION
.261 6.63 (12) HOLES
.05 [1.3] 1.3 .o.5
3.75 [95.3] 95.3 3.75
1.25 31.8 1.25 [31.8]
2.60 66.1
3.75 [95.3] 95.3 3.75
12.7 .50 [12.7]
4.75 120.7
.55 [14.0] 14.0 .55 ADJUSTMENT
1.13 [28.7] 28.7 1.13
2.75 [69.9] 69.9 2.75 2.00 50.8
10-24 THD. (4) PLACES
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
3.60 91.5 2.60 [66.0] 66.0 2.60
4.19 106.4
REAR VIEW VIEW RIGHT HAND SHOWN
RIGHT SIDE VIEW RIGHT HAND SHOWN
Single Point Locking Locking T-Handle T-Handle with Offset Cam Cam Single Point with Offset Part Part Number Number
Key Key Code Code
Equivalent Equivalent Key Key Code Code
484-502-01 484-502-01
EM502 CH502 EM502 CH502
Pan Pan Material/ Finish Finish Material/
Holes Holes
Pan Pan Thickness Thickness
Handle Handle Material Material
430SS 430SS pan pan only only // polished polished
no no
18 gauge 18 gauge
die die cast cast zinc zinc
features adjustable adjustable cam cam I features .81 [20.6] .81 [20.6]--1.20 1.20[30.5] [30.5]GRIP GRIP -.-R.38 9.6 R38[9.6]
3.00 76.2 3.00[76.2]
28.7 1.13 [28.7]
2.25 [57.2] 57.2 2.25 4.88 [123.8 4.88 23.8]
y
replacement cam locks locks available. available. replacement cam see table table below. below. see
22.4 .88 [22.4]
J 4.75 120.7
FRONT VIEW FRONT VIEW
2.58 [65.5] 65.5 2.58
R.56 14.2 .56 [14.2 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
RIGHT SIDE RIGHT SIDE VIEW VIEW
Replacement Cam Locks Locks Replacement Cam Key Key Code Code
Equivalent Equivalent
LCEM501 LCEM501
Part Part Number Number
EM501 EM501
CH501 CH501
LCEM502 LCEM502
EM502 EM502
CH502 CH502
LCEM545 LCEM545
EM545 EM545
CH545 CH545
LCEM751 LCEM751
EM751 EM751
CH751 CH751
Folding T-Handle Gasket Folding T-Handle Gasket Part Part Number Number
480G 480G
Description Description folding T-handle folding T-handle gasket gasket
for use use with with part 484-502-01 and and T-handles T-handles on I for part no. no. 484-502-01 on page page 59 59
58 58
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hir es and Hinges and Industrial Industri -1 Hardware Hardware
Key Key Code Code
475-501 475-501
EM501 EM501
CH501 CH501
475-502 475-502
EM502 EM502
CH502 CH502
475-545 475-545
EM545 EM545
CH545 CH545
Part Part Number Number
476-501-01 476-501-01
EM501 EM501
CH501 CH501
477-501 477-501
EM501 EM501
CH501 CH501
477-502 477-502
EM502 EM502
CH502 CH502
477-545 477-545
EM545 EM545
CH545 CH545
Material/ Finish Material/ Finish
Holes Holes
steel // zinc steel zinc plated plated
Pan Pan Thickness Thickness
Handle Handle Material Material
18 18 gauge gauge
die cast zinc die cast zinc
18 18 gauge gauge
die cast zinc die cast zinc
18 18 gauge gauge
die cast zinc die cast zinc
DI
n
no no no no
Latches
Three-Point Locking Locking T-Handles Three-Point T-Handles Equivalent Equivalent Key Key Code Code
no no steel // chrome steel chrome
yes yes
plated plated 304SS 304SS pan polished pan only only// polished
yes yes yes yes yes yes
includes(2) (2)0315 Ø.315[8.00] [8.00]xx48 48[1,219] [1,219] long long rods, rods, zinc zinc plated I includes plated and and rod rod guides guides gasket part part no. no. 480G, 480G, see I gasket see page page 58 58
replacement cam cam locks locks available. replacement available. see bottomofofthe thepg. pg.58_ 58 see table table at at the the bottom ,,
3.88 98.4 -3.88[98.4] --
.19 [4.8] 4.8 0 .19 (4) HOLES HOLES (4)
3.00 76.2 3.00 [76.2] R.38 [9.5] 9.5 R.38 (4) PLACES PLACES (4)
4.75 120.7
.91 23.0 .91[23.0] .25 6.3 .25]6.3]
.90 22.9 1.81 46.1 x1.81[461] 8.00 0 .315 .315[8.00]
2.25 [57.2] 57.2 2.25
3.31 84.1
3.31 84.2
.88 [22.2] 22.2 .88
4.88 123.8 4.88[123.8]
.50 12.7 .50 112.71 XX
1.46 37.2 1.46[37.2]
3.88 98.4 3.88[98.4]
R.56 [14.3] 14.3 -R.56
FRONT VIEW FRONT VIEW VIEW FRONT
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
RIGHT SIDE VIEW RIGHT SIDE VIEW RIGHT SIDE VIEW
Single-Point Locking T-Handles Single-Point Locking T-Handles Key Key Code Code
Equivalent Equivalent Key Key Code Code
480-501 480-501
EM501 EM501
CH501 CH501
480-502 480-502
EM502 EM502
CH502 CH502
480-545 480-545
EM545 EM545
CH545 CH545
480-751 480-751
EM751 EM751
CH751 CH751
none none
484-751 484-751
EM751 EM751
CH751 CH751
holes holes
484-501 484-501
EM501 EM501
CH501 CH501
484-502 484-502
EM502 EM502
CH502 CH502
484-545 484-545
EM545 EM545
CH545 CH545
494-501-01 494-501-01
EM501 EM501
CH501 CH501
Part Part Number Number
Material/ Finish Material/ Finish
Mounting Mounting
Pan Pan Thickness Thickness
Handle Handle Material Material
18 gauge 18 gauge
die cast die cast zinc zinc
18 gauge 18 gauge
die cast die cast zinc zinc
none none none none
steel / zinc plated plated steel/zinc
none none
holes holes
430SS 430SS
holes holes
pan pan only only // polished polished
holes holes threaded studs studs threaded
camhas has multiple multiple holes holes for I cam for optional optional multi-point multi-point installation installation features adjustable adjustable cam cam I features gasket part part no. no. 480G, 480G, see I gasket see page page 58 58 see page page 61 61 for I see for rod rod
part no. 494-501-01 494-501-01 part no. only, has threaded threaded studs studs only, has and a gasket and a gasket as as shown. shown. 1.25 1.25 [31.8] [31.8] -- 1.76 1.76 [44.6] [44.6] GRIP GRIP
3.88 3.88 98.4 [98.4] -.-
.19 [4.8] 4.8 0.19 (4) HOLES HOLES (4)
3.00 76.2 3.00 [76.2] R.38 [9.5] 9.5 R.38 (4) PLACES PLACES (4)
4.75 120.7 1.13 28.7 1.13[28.7]
replacement cam cam locks locks available. replacement available. see table at the the bottom bottomofofthe thepg. pg.58_ 58 ) see table at ,.
2.25 [57.2] 57.2 2.25
3.31 84.1
3.31 84.2
4.88 123.8 4.88[123.8]
XXXX
.88 [22.2] 22.2 .88
R.56 [14.3] 14.3 \-R.56
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.188 4.76 (4) HOLES 3.88 98.4
FRONT FRONT VIEW VIEW FRONT VIEW
2.57 65.3 2.57[65.3]
RIGHT RIGHT SIDE VIEW RIGHT SIDE VIEW SIDE VIEW
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
59 59
Latches
PACIFY' -VGINEr- AND PRODUCTS
Single-Point FoldingT-Handles T-Handles with with Nylon Nylon Cam Cam Roller Roller Single-Point Folding Material Material
Finish Finish
Locking Locking
Holes/Studs Holes/Studs
479-KD 479-KD
Part Part Number Number
304SS 304SS
polished polished face face
yes yes
holes holes
489-KD 489-KD
304SS 304SS
polished polished face face
yes yes
studs studs
keyed different different I keyed 85 21.6 0..85
.81 1.77 [44.9] 20.6 -- 1.77 .81 [20.6] GRIP RANGE
90° CW CW 90° ROTATION
.236 [6.00] HOLES 6.00 HOLES 0.236 OR Ø.236 [6.00] [6.00] STUDS STUDS 0.236 (SEE TABLE) TABLE)
.76 19.3 .76[19.3]
1.21 [30.8] 30.8 1.21
42.0 1.65 [42.0]
5.50 [139.7] 139.7 5.50
3.75 [95.3] 95.3 3.75
.64 [16.3] 16.3 .64
patented patented
.04 1.0 .04[1.0]
4.25 [108.0] 108.0 4.25
.193 4.90 0.193[4.90] (4) HOLES
64.1 2.52 [64.1]
REAR VIEW REAR VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW
3.69 [93.7] 93.7 3.69
3.6993.7] 93.7 -3.69[
H
.193 4.90
(4) HOLES HOLES (4) 3.75 95.3 3.75[95.3]
4.52 114.8 4.52[114.8]
3.30 83.8 83.8 -.-3.30[
R.25 6.4 MAX. MAX. R.25[6.4] PLACES f(4)(4) PLACES
V MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Multi-Point Flush Folding Folding T-Handles T-Handles Multi-Point Padlocking Padlocking Flush
EW P7 DU, W ILY
Part Key Part Key Number Code Number Code
Rotation Rotation
Material Material // Finish Finish
Cam Cam Type Type
Grip Grip
Mounting Mounting
496SS-L 49655-L
CH501 90°CW CW CH501 90°
304SS pan 304SS pan // polished polished
fixed fixed cam roller roller cam
1.08 [27.4] [27.4] 1.08
threaded threaded studs studs
496SS-R 49655-R
CH501 90°CCW CCW CH501 90°
304SS pan 304SS pan // polished polished
fixed fixed cam roller roller cam
1.08 [27.4] [27.4] 1.08
threaded threaded studs studs
497SS-L 49755-L
CH501 90°CW CW CH501 90°
304SS pan / / adjustable adjustable 304SS pan polished cam roller roller cam polished
1.13 [28.7] -- 1.96 1.13 [28.7] 1.96 [49.78] [49.78]
threaded threaded studs studs
497SS-R 49755-R
CH501 90°CCW CCW CH501 90°
304SS pan / / adjustable adjustable 304SS pan polished cam roller roller cam polished
1.13 [28.7] -- 1.96 1.13 [28.7] 1.96 [49.78] [49.78]
threaded threaded studs studs
recessed lock lock I recessed .040 [1.02] [1.02] pan I .040 pan thickness thickness die cast cast zinc zinc handle I die handle
accepts up up to padlock I accepts to 7/16" 7/1e padlock
patent patent pending pending 1.08 27.4 GRIP GRIP 1.08[27.4] 90° CCW CCW 90° ROTATION ROTATION
1.13 [28.7] [28.7] -- 1.96 1.13 1.96 [49.78] [49.78] GRIP GRIP RANGE RANGE
3.65[92.7] 92.7 -.-3.65 -.3.00[76.2] 76.2 -•-3.00
.54 [13.7] 13.7 .54
90° CW 90° CW ROTATION ROTATION
.28 7.1 i-.28[7.1]
.85 21.6 0.85[21.6] 1.68 42.5 1.68 42.5] .240 [6.10] 6.10 -E 0.240 2.38 [60.5] 60.5 2.38
2.66 [67.6] 67.6 2.66
3.38 [85.9] 85.9 3.38
(2) PLACES PLACES (2)
I
5.23 [132.7 5.23 32.7]
O
.110 [2.79] 2.79 0.110 (2) PLACES PLACES (2)
f
.65 16.5 .65[16.5] (2) PLACES (2) PLACES 1.26 32.0 1.26 [32.0]
5.05 [128.3] 128.3 5.05 FRONT VIEW FRONT VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW FIXED CAM CAM FIXED
RIGHT SIDE SIDE VIEW RIGHT VIEW ADJUSTABLE CAM ADJUSTABLE CAM
Request Info
60 60
Download 31:Immo @ Download @www.spep.com www.spep.com
29.7 1.17 1.17[29.7]
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
1-800-453-1692 www.aboveboardelectronics.com
.220 [5.59] 5.59 0.220 (4) HOLES HOLES (4)
Hinges and Industrial ind Industri -1 Hardware Hardware
723 723
Material Material
Finish Finish
steel steel
zinc plated zinc plated
.22 5.7 .22[5.7]
48.00 1219.2 48.00[1219.2]
custom lengths lengths can can be be made madeto toyour your specification specification ► custom .260 6.60 0.260[6.60] .315 8.00 0.315[8.00]
Latches
Ø5/16 [8.0]Connecting Connecting Rod Rod 05/16 [8.0] Part Part Number Number
.17 4.2 .17[4.2]
♦
1.62 41.1
Guide for [8.0] Connecting Connecting Rod Rod Guide for aa Ø5/16 05/16 [8.0]
1.13 28.6
Part Part Number Number
724 724
Material Material
Finish Finish
steel steel
zinc plated zinc plated
.50 12.7 1.62 41.1 ] 1.62[ 41.1
.180 4.57 (2) HOLES .120 3.05 .120[3.05] C.R.S. C.R.S.
1.13 28.6 1.13]28.6]
.50 12.7 .50[12.7] .180 4.57 0.180[4.57] (2) HOLES HOLES (2)
END VIEW VIEW END
TOP VIEW TOP VIEW .120 3.05 C.R.S.
Part Part Number Number
725 725
Material Material
Finish Finish
steel steel
zinc plated zinc plated
.074 1.88 .074[1.88] C.R.S. C.R.S.
Guide for [8.0] Connecting Connecting Rod Rod Guide for aa Ø5/16 05/16 [8.0]
1.81 46.1 1.81[ 46.1]
.625 .625[ 15.88 15.88] .344 8.73 0.34 4[8.73]
.50 12.7 .50[12.7] END VIEW ENDVIEW
TOP VIEW TOP VIEW 1.79 [45.6] 1.09 [27.7]
Part Part Number Number
726 726
Material Material
Finish Finish
nylon nylon
white white
Guide for [8.0] Connecting Connecting Rod Rod Guide for aa Ø5/16 05/16 [8.0]
.70 [17.9]
1.79 [45.6] 1.09 [27.7]
Ø.188 [4.78] (2) HOLES
.70 [17.9]
.34 [8.71]
Ø.188 [4.78] (2) HOLES
END VIEW ElsW
TOP TOP VIEW VIEW
Cam Lock Cam Lock Dust Dust Cover Cover
.34 [8.71]
Part Part Number Number
K220 K220
Description Description
1
1.90 [48.3] 48.3 1.90
cam lock dust cam lock dust cover cover
.49 12.5 49 [12.5]
020[50]
.020 .50
.638 [16.20] 16.20 .638
.61 [15.5] 15.5 .61
1.10 [28.0] 28.0 01.10
Cotter Pin Pin Cotter Part Part Number Number
XF12-01 XF12-01
Description Description 3/32 dia. xx 1/2 3/32 dia. 1/2 long long
steel, zinc ► steel, zinc plated plated to connect connectrods rodswith with folding folding T-handles T-handles ► used used to
Clevis Pin Pin Clevis Part Part Number Number
XF13-01 XF13-01
Description Description 1/4 dia. xx 1/2 1/4 dia. 1/2 long long
steel, zinc ► steel, zinc plated plated to connect connectrods rodswith with folding folding T-handles T-handles ► used used to Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
61 61
Latches
''‘EP" 11 PAC ff--qc
ENGINEERINM PD PRODUCTS
Flush Flush Slam Slam Latches Latches
31655
Stainless Steel Steel Locking Locking Latches Latches Stainless Part Part Number Number
Panel Panel Thickness Thickness Range A Range A
Material Material
Finish Finish
6-10SSTLK 6-10SSTLK
.079 [2.00] [2.00] --.276 .276 [7.00] [7.00] .079
316SS 316SS
hand polished hand polished
6-11SSTLK 6-11SSTLK
.276 [7.00] [7.00] --.472 .472 [12.00] [12.00] .276
316SS 316SS
hand polished hand polished
6-12SSTLK 6-12SSTLK
.472 [12.00] [12.00] -- .669 .472 .669 [17.00] [17.00]
316SS 316SS
hand polished hand polished
6-13SSTLK 6-13SSTLK
.669 [17.00] [17.00] -- .866 .669 .866 [22.00] [22.00]
316SS 316SS
hand polished hand polished
includes: I includes: (2) ringed ringed keys keys I (2) (2) mounting mounting screws screws I (2) (1) mounting mounting bracket bracket I (1) (1) keeper I (1) keeper
Stainless Steel Steel Non-Locking Non-Locking Latches Latches Stainless Panel Panel Thickness Thickness Range A Range A
Material Material
Finish Finish
.079 [2.00] [2.00] --.276 .276 [7.00] [7.00] .079
316SS 316SS
hand polished hand polished
6-11SST 6-11SST
.276 [7.00] [7.00] --.472 .472 [12.00] [12.00] .276
316SS 316SS
hand polished hand polished
6-12SST 6-12SST
.472 [12.00] [12.00] -- .669 .472 .669 [17.00] [17.00]
316SS 316SS
hand polished hand polished
6-13SST 6-13SST
.669 [17.00] [17.00] -- .866 .669 .866 [22.00] [22.00]
316SS 316SS
hand polished hand polished
Part Part Number Number
6-10SST 6-10SST
includes: I includes: (2) mounting screws I (2) mounting screws (1) mounting mounting bracket bracket I (1) (1) keeper I (1) keeper (2) MOUNTING MOUNTING SCREWSSCREWS 4 (2) 0) MOUNTING BRACKET MOUNTING BRACK A
Die Cast Zinc Die Cast Zinc Locking Locking Latches Latches
DOOR DOOR
1.62 41.1
1.97 1 [50.0] 01.97 50. THRU H HOLE THRU OL01 E
1.30 33.0
Part Part Number Number
6-10CHLK 6-10CHLK
.75
LATCH LATCH
19.0 Du]
FRAME FRAME
.22 15.61THRU [5.6] THRU HOLE A #10 #10 GCREW SCREW 0.BB HOLE FOR FOR A (2) PLACES PLACES (GCREWS (SCREWS NOT (2) NOT INCLUDED) INCLUDED)
KEEPER KEEPER
KEEPER
2.42 [61.5] 61.5 02.42
die cast cast zinc zinc chrome die chrome plated plated
6-11CHLK 6-11CHLK
.276 [7.00] [7.00] --.472 .472 [12.00] [12.00] .276
die cast cast zinc zinc chrome die chrome plated plated
6-12CHLK 6-12CHLK
.472 [12.00] [12.00] -- .669 die cast cast zinc zinc chrome .472 .669 [17.00] [17.00] die chrome plated plated
6-13CHLK 6-13CHLK
.669 [17.00] [17.00] -- .866 die cast cast zinc zinc chrome .669 .866 [22.00] [22.00] die chrome plated plated
includes: I includes: (2) ringed keys I (2) ringed keys (2) mounting mounting screws screws I (2) (1) mounting mounting bracket bracket I (1) (1) keeper I (1) keeper
Part Part Number Number
TOP VIEW TOP VIEW
6-10CH 6-10CH PANEL THICKNESS RANGE
1.93 [49.0] 49.0 1.93
24.6 .97 [24.6]
1.40 [35.5] 35.5 1.40
.27 [6.8] 6.8 .27
MOUNTING BRACKET
.217 [5.50] [5.50] xx .335 .335 [8.50] .217 [8.50] (2) OBROUNDS
FRONT VIEW VIEW FRONT
M5 THREADS (2) PLACES
Finish Finish
Die Die Cast Cast Zinc Zinc Non-Locking Non-Locking Latches Latches
12.5 .49 [12.5]
.16 4.0 16[4.0]
Material Material
.079 [2.00] [2.00] -- .276 .079 .276 [7.00] [7.00]
32.0 1.26 [32.0]
LATCH
Panel Panel Thickness Thickness Range A Range A
19.0 .75 [19.0] .75 RIGHT SIDE SIDE VIEW RIGHT VIEW
Panel Panel Thickness Thickness Range A Range A
Material Material
Finish Finish
.079 [2.00] die cast chrome plated plated .079 [2.00]- .276 -.276[7.00] [7.00] die cast zinc zinc chrome
6-11CH 6-11CH
.276 [7.00] chrome plated plated .276 [7.00]- .472 -.472[12.00] [12.00] die die cast castzinc zinc chrome
6-12CH 6-12CH
.472 [12.00] chrome plated .472 [12.00]- .669 -.669[17.00] [17.00]die diecast castzinc zinc chrome plated
6-13CH 6-13CH
.669 [17.00] [22.00] chrome plated .669 [17.00]- -.866 .866 [22.00]die diecast castzinc zinc chrome plated
includes: I includes: (2) mounting screws I (2) mounting screws (1) mounting mounting bracket bracket I (1) (1) keeper I (1) keeper
24.6 .97 [24.6]
37.0 1.46 [37.0]
14.3 .56 [14.3]
BOTTOM VIEW BOTTOM VIEW
62 62
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
n -nes and Hinges Hardware and Industrial Industrial bfrrdWare
Part Number Part Number
Panel Thickness Thickness Panel Range A Range A
Finish Finish
6-10BKCH751 6-10BKCH751
.075 [1.91] [1.91] -.275 - .275 [7.00] [7.00] .075
black black
6-11BKCH751 6-11BKCH751
.275 [7.00] [7.00] -.475 - .475 [12.07] [12.07] .275
black black
6-12BKCH751 6-12BKCH751
.475 [12.07] [12.07] -.675 - .675 [17.15] [17.15] .475
black black
6-13BKCH751 6-13BKCH751
.675 [17.15] [17.15] -.875 - .875 [22.23] [22.23] .675
black black
Latches
Plastic Plastic Flush Flush Slam Slam Latches Latches Black Black Locking Locking Latches Latches
material:thermoplastic thermoplasticwith withUV UV stabilizers stabilizers I material: includes: I includes: (2) ringed ringed keys keys I (2) (2) mounting mounting screws screws I (2) (1) keeper keeper I (1) (1) mounting bracket I (1) mounting bracket stainlesssteel steellock lock face face & & dust I stainless dust shutter shutter key code codeCH751 CH751 I key
Black Black Non-Locking Non-Locking Latches Latches Panel Thickness Thickness Panel Range A Range A
Finish Finish
6-10BK 6-10BK
.075 [1.91] [1.91] -- .275 .075 .275 [7.00] [7.00]
black black
6-11BK 6-11BK
.275 [7.00] [7.00] -.475 - .475 [12.07] [12.07] .275
black black
6-12BK 6-12BK
.475 [7.00] [7.00] -.675 - .675 [17.15] [17.15] .475
black black
6-13BK 6-13BK
.675 [17.15] [17.15] -.875 - .875 [22.23] [22.23] .675
black black
Part Number Part Number
material:thermoplastic thermoplasticwith withUV UV stabilizers stabilizers I material: includes: I includes: (2) mounting screws I (2) mounting screws (1) keeper keeper I (1) (1) mounting bracket I (1) mounting bracket
(2) MOUNTING SCREW8 SCREWS R)MOUWING MOUNTING BRACKET A
Panel Thickness Thickness Panel Range A Range A
Finish Finish
6-10WTCH751 6-10WTCH751
.075 [1.91] .275 [7.00] [7.00] .075 [1.91] --.275
white white
6-11WTCH751 6-11WTCH751
.275 [7.00] .475 [12.07] [12.07] .275 [7.00] --.475
white white
6-12WTCH751 6-12WTCH751
.475 [12.07] white .475 [12.07]- .675 -.675[17.15] [17.15] white
6-13WTCH751 6-13WTCH751
.675 [17.15] white .675 [17.15]- .875 -.875[22.23] [22.23] white
material:thermoplastic thermoplasticwith withUV UV stabilizers stabilizers I material: includes: I includes: I (2) (2) ringed keys ringed keys (2) mounting mounting screws screws I (2) I (1) (1) keeper keeper (1) mounting bracket I (1) mounting bracket stainlesssteel steellock lock face face & & dust I stainless dust shutter shutter key code codeCH751 CH751 I key
1.30 33.0
.75 19.1
LATCH
FRAME
.22[5.0j [5.6]THRLI THRUHOLE HOLE FOR FOR *#1O A #10 SCREW SCREW O.a (2) PLACES (SCREWS NOT INCLUDED) INCLUDED)
KEEPER
KEEPER KEEPER
2.40 [61.0] 61.0 0 2.40
1.26 [32.0] 32.0 1.26
.49 [12.5] 12.5 .49 LATCH LATCH
White White Non-Locking Non-Locking Latches Latches
TOP VIEW TOP
PANEL PANEL THICKNESS THICKNESS] , RANGE
.25 [6.3] 6.3 .25
Panel Thickness Thickness Panel Range A Range A
Finish Finish
6-10WT 6-10WT
.075 [1.91] [1.91] -- .275 .075 .275 [7.00] [7.00]
white white
6-11WT 6-11WT
.275 [7.00] .475 [12.07] [12.07] .275 [7.00] --.475
white white
6-12WT 6-12WT
.475 [7.00] .675 [17.15] [17.15] .475 [7.00] --.675
white white
6-13WT 6-13WT
.675 [17.15] .875 [22.23] [22.23] .675 [17.15] --.875
white white
Part Number Part Number
1.62 41.1
2.00 [51.8] THRU HOLE
White Locking White Locking Latches Latches Part Number Part Number
DOOR
1.00 25.4 1.00 [25.4]
1.40 [35.6] 35.6 1.40
.28 [7.2] 7.2 .28
MOUNTING BRACKET BRACKET MOUNTING FRONT VIEW VIEW FRONT
M5 THREAD (2) PLACES PLACES (2)
material:thermoplastic thermoplasticwith withUV UV stabilizers stabilizers I material: includes: I includes: (2) mounting screws I (2) mounting screws (1) keeper keeper I (1) (1) mounting mounting bracket bracket I (1)
1.97 [50.0] 50.0 1.97
.213 [5.40] 5.40 xx .343 .343 [8.70] [8.70] .213 (2) OBROUNDS OBROUNDS (2)
.75 [19.0] 19.0 .75 RIGHT SIDE SIDE VIEW VIEW RIGHT
1.33 [33.8] 33.8 1.33
1.60 [40.6] 40.6 1.60
.58 [14.7] 14.7 .58
BOTTOM VIEW VIEW BOTTOM
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 MIN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
63 63
Latches
-MCIFIC ENGINEERING AND PRODUCTS
E2
Slam Slam Latches Latches C
D
E1 E1 _ E2 El s
E3
TOP VIEW
E4 A
F (4) PLACES
B3
J
B3
C
D D E3
E3 E3
TOP VIEW TOP VIEW A3 A3
B4
G
E5
D
TOP VIEW
t E2E2
A3
C
E4 E4 A
B3
B4
A3 A
H
B2
K
A2
Part Part Number Number
A1 Al
A2 A2
A3 A3
B1 B1
B2 B2
J
G
B3
J H
B2
B1
B2
B2
H K
A2 A2
B3 B3
B4 B4
C C
D D
E1 El
FRONT VIEW
K
A2
A
A1 Al A A2 VIEW FRONT FRONT VIEW A1
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
SECTION A-A
E5
B2
A1 FRONT VIEW
B3
B1
A2
A
G
E5 E5 E4
F (4) PLACES
B3 B2
F (4) PLACES PLACES (4)
A2 MOUNTING DIMENSIONS
SECTION A-A SECTION A-A
E2 E2
E3 E3
E4 E4
SECTION A-A
E5 E5
F F
G G
MOUNTING DIMENSIONS
H H
J
K
1137-01 1137-01
.51 .394 .51 394 [13.0] [13.0] [10.00] [10.00]
.20 .20 [5.0] [5.0]
1.02 .906 1.02 .906 [26.0] [26.0] [23.00] [23.00]
.06 .06 [1.5] [1.5]
.12 .12 [3.2] [3.2]
.24 .24 [6.2] [6.2]
.24 .24 [6.0] [6.0]
.020 .020 [0.50] [0.50]
.031 .031 [0.80] [0.80]
.05 .05 [1.3] [13]
.17 .17 [4.3] [43]
.03 .03 -.04 -.04 0.063 Ø.063 [0.8 1.0] [1.60] [1.60] [0.8 --1.0]
.16 .16 [4.0] [4.0]
.71 .71 [18.0] [18.0]
.22 .22 [5.5] [5.5]
R R .22 .22 [5.5] [5.5]
1137-02 1137-02
.63 .488 .63 .488 [16.0] [16.0] [12.40] [12.40]
.24 .24 [6.0] [6.0]
1.19 .984 1.19 .984 [30.3] [303] [25.00] [25.00]
.13 .13 [3.3] [33]
.11 .11 [2.9] [2.9]
.31 31 [7.8] [7.8]
.26 .26 [6.6] [6.6]
.031 .031 [0.80] [0.80]
.047 .047 [1.20] [1.20]
.08 .08 [2.0] [2.0]
.16 .16 [4.0] [4.0]
.05 -- .07 Ø.067 .05 .07 0.067 [1.2 1.8] [1.70] [1.70] [1.2 --1.8]
.16 .16 [4.0] [4.0]
.94 .94 [24.0] [24.0]
.12 .12 [3.0] [3.0]
R.24 R.24 [6.0] [6.0]
1137-03 1137-03
.87 .669 .87 .669 [22.0] [22.0] [17.00] [17.00]
.31 31 [7.8] [7.8]
1.52 1.280 1.52 1.280 [38.5] [38.5] [32.50] [32.50]
.14 .14 [3.5] [3.5]
.15 .15 [3.7] [3.7]
.39 39 [10.0] [10.0]
.29 .29 [7.4] [7.4]
.039 .039 [1.00] [1.00]
.047 .047 [1.20] [1.20]
.08 .08 [2.0] [2.0]
.20 .20 [5.0] [5.0]
.05 -.06 -.06 0.083 Ø.083 .05 [1.2 1.4] [2.10] [2.10] [1.2 --1.4]
.20 .20 [5.0] [5.0]
1.16 1.16 [29.5] [29.5]
.17 .17 [4.4] [4.4]
R .31 R 31 [8.0] [8.0]
1137-04 1137-04
1.02 .787 1.02 .787 [26.0] [26.0] [20.00] [20.00]
.39 39 [9.8] [9.8]
1.77 1.457 1.77 1.457 [45.0] [45.0] [37.00] [37.00]
.20 .20 [5.0] [5.0]
.14 .14 [3.8] [3.8]
.47 .47 [12.0] [12.0]
.29 .29 [7.4] [7.4]
.039 .039 [1.00] [1.00]
.047 .047 [1.20] [1.20]
.08 .08 [2.0] [2.0]
.20 .20 [5.0] [5.0]
.05 -.06 -.06 0.102 Ø.102 .05 [1.2 1.4] [2.60] [2.60] [1.2 --1.4]
.24 .24 [6.0] [6.0]
1.42 1.42 [36.0] [36.0]
.24 .24 [6.0] [6.0]
R .35 R 35 [9.0] [9.0]
1137-05 1137-05
1.26 .945 .46 1.26 .945 .46 [32.0] [32.0] [24.00] [24.00] [11.6] [11.6]
2.17 1.780 2.17 1.780 [55.2] [55.2] [45.20] [45.20]
.24 .24 [6.0] [6.0]
.11 .11 [3.0] [3.0]
.55 .55 [14.0] [14.0]
.34 34 [8.7] [8.7]
.039 .039 [1.00] [1.00]
.047 .047 [1.20] [1.20]
.08 .08 [2.0] [2.0]
.24 .24 [6.0] [6.0]
.05 -- .07 .05 .07 [1.2 -1.7] [1.2 -1.7]
.24 .24 [6.0] [6.0]
1.77 1.77 [45.0] [45.0]
.22 .22 [5.5] [5.5]
R.47 R.47 [12.0] [12.0]
Ø.118 0.118 [3.00] [3.00]
material: steel steel I material: finish: nickel nickel plated plated I finish:
Key Locking Key Locking Bolt Bolt Latch Latch .886 22.50 0.886[22.50]
Part Number Part Number
1.23 31.2 1.23[31.2]
90° 90° ROTATION ROTATION KEY REMOVABLE REMOVABLE IN KEY IN THIS POSITION POSITION ONLY ONLY THIS
.75 19.0 .75[19.0]
.31 8.0
.53 13.5 .53[13.5]
.38 9.6 .38[9.6] .150 3.80 xx.276[ .276[ 7.01 7.01 ]] 0.150[3.80] (2) OBROUND OBROUND (2)
Finish Finish
.31 8.0
.75 19.0
2-15CH 2-15CH
.55 14.0 .55[14.0]
90° 90° ROTATION ROTATION
Material Material
.50 12.8
.77 19.6 .77[19.6
die cast zinc die cast zinc .53 13.5
1.43 36.2
chrome chrome plated plated
alllatches latches include: include: I all body nut nut I body .38 9.6 strikeininsteel, steel, zinc zinc plated I strike plated.059 1.50 THK. x .276[ 7.01 ]CH751 .150 3.80 (2)ringed ringed keys, code CH751 I (2) keys, code (2) OBROUND springclip clipmounting mountingalso alsoavailable available (non-stock) (non-stock) I spring STRIKE seepg. pg. 296 296 for I see for the the recommended recommended mounting mounting cut-out cut-out
.63 16.0 .63[16.0]
LATCH LATCH
_
.059 1.50 .059[ THK. THK. STRIKE ICE
Key Locking Key Locking Bolt Bolt Latch Latch Part Number Part Number
2-16CH 2-16CH
Material Material
Finish Finish
die cast zinc die cast zinc
chrome chrome plated plated
forpanel panelthickness thicknessbetween between.04 .04 [1.0] [1.0] --.31 .31 [8.0] [8.0] I for plastic bolt I plastic bolt
36.8 1.45 [36.8]
+.00 +.1 1.004 cal m418[25561 - .00 25.50 .0
+.004 +.10 1.004 - .000 25.50 .00
.67 16.9 .67 [16.9]
.76 19.2 .76 [19.2]
.87 [22.0] 22.0 .87 HOUSING FLAT FLAT HOUSING
1.13 [28.7] 28.7 01.13
.19 [4.7] 4.7 .19
+.01
+.3
.87 - .00 22.2+.01 .0 +.3 .73[22211 .87 - .00 22.2 .0 MOUNTING MOUNTING DIMENSIONS DIMENSIONS
MOUNTING DIMENSIONS
64 64
Download www.spep.com Download 3DmoDEts @ @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
co
Locking and Non-Locking Latches Latches Locking and Non-Locking Part Number Part Number
Description Description
Lock Face Face Finish Lock Finish
2-11BK 2-11BK
non-locking non-locking
black black
2-13BK 2-13BK
locking locking
polished polished
2-14BK 2-14BK
locking locking
black black
NEMA NEMA
4
2.14 54.4 1.13 28.6
12
IP65 RATED
Push Button Latches Push Button Latches
.150 3.81 X .275 [7.00] (2) OBROUND
.72 18.2
1.00 25.4
BOLT .27 6.8
Part Number Part Number
Description Description
Locking
2-11BK01 2-11BK01
non-locking non-locking
2-13BK01 2-13BK01
locking locking
polished polished
2-14BK01 2-14BK01
locking locking
black black
2.14 54.4
1.13 28.6 black black
Description Description
.27 6.8 .74 18.8
FRONT FRONT VIEW VIEW 1-20 THD.
.38 9.5
1-20 THD. REAR VIEW REAR VIEW
LATCH
BOLT
locking locking
.38 9.5
.75 19.1 .843 21.41
.063 1.60
.75 19.1
STRIKE
LATCH
ST
.150 3.81 ] X X .275 .275 [7.00] [7.00] 0.150[3.81
(2) OBROUND
polished polished black black
.27 6.8
.38 9.5 .3819.51
.32 8.0
Locking Locking Black Face Face Black (perpendicular tab tab shown) shown) (perpendicular
.53 13.3 .53[13.3]
Push Button Latches Features Push Button Latches Features
.75 19.1 75[19.1]
.843 21.41
1-20 THD. material:nylon nylonwith withUV UV stabilizers I material: stabilizers finish: black black textured LATCH I finish: textured alllatches latches include: include: I all body nut nut I body lockwasher washer I lock strikeinin304SS,passivated 304SS,passivated finish finish I strike (2)ringed ringedkeys keys I (2) keycode codeCH751 CH751(for (for locking locking only) only) I key patenteddesign design I patented partshave have internal internal o-rings o-rings I parts facegasket gasketavailable available separately separately (part I face (part no. no. 2-1G), 2-1G), to meet meet NEMA NEMA type type 4, 4, 12 12 and and IP65 IP65 enclosure enclosure to requirements requirements
.063 1.60 .063[1.60]—.STRIKE STRIKE STRIKE
+.01
+.25
.88 - .00 22.2 .00 --31[22-2331
t +.25 +.01 1.00 - .00 [25A131 25.4 .00 sniao!N
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
ria
In-line with Bolt In-line with Bolt KH39BK KH39BK
Non-Locking Non-Locking (in-line tab (in-line tab shown) shown)
LATCH LATCH
black black
locking locking
Part Number Part Number
.150 3.81 X .275 (2) OBROUND
.53 13.3
.4021.41 10.3 ] .843 .843[21.41
.74 18.8
.40 10.3
.32 8.0 .27 6.8
.74 18.8
.72 18.2
1.00 25.4
2-14BK02 2-14BK02
.150 .723.81 18.2X .275 [7.00] (2) OBROUND BOLT
1.00 25.4
BOLT
Lock Lock Face Face Finish Finish
2.14non-locking 54.4 non-locking
2-13BK02 2-13BK02
2.14 54.4
.72 18.2 .72[18.2]
1.00 25.40 1.13[28.6 1.13 28.6 ]
.063 1.60 STRIKE
LATCH
.40 10.3
Part Number Part Number
.75 19.1
.843 21.41
1-20 THD. RIGHT SIDE SIDE VIEW RIGHT VIEW
Locking and Locking and Non-Locking Non-Locking Latches Latches with with Pull Tab Perpendicular to Bolt Pull Tab Perpendicular to Bolt 2-11BK02 2-11BK02
.53 13.3
.40 10.3 ] .40[10.3
Lock Lock Face Face Finish Finish
.32 8.0
.38 9.5
.74 18.8 0.74[18.8]
Locking Locking and and Non-Locking Non-Locking Latches Latches with with Pull Tab Pull Tab In-line In-line with with Bolt Bolt
Latches
3 28.6
Hinges and Industrial I-frrdware Hardware Hinges ind Industrial
Material Material
Finish Finish
nylon nylon with with UV UV stabilizers stabilizers
black black textured textured
.875 22.23
PullTab Tab Pull
.093 2.36 .093[2.36]
1.00 25.4 1.75 44.5 1.75[44.5] .51 .51] 13.0 13.0] 1.25 31.8
.68 .68[ 17.3 17.3
Perpendicular to Perpendicular to Bolt Bolt Part Number Part Number
KH39BK-01 KH39BK-01
Material Material
Finish Finish
nylon nylon with with UV UV stabilizers stabilizers
black black textured textured
.093[2.36]] .093 2.36
1.00 25.4
.875 22.23
1.75[ 44.5 44.5 ] 1.75 .51 13.0
1.25 31.8
Request Info
1-800-453-1692 www.aboveboardelectronics.com
413
.68[ 17.3 17.3 ] .68
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
65 65
Latches
SIERRA PACIFIC
ENGINE ,---,3 AND PRODUCTS
Double Action Slam Slam Latch Latch Double Action Part Part Number Number
617BK 617BK
1.57 40.0
.87 22.0
Finish Finish
plastic plastic
smooth, black black smooth,
stopperfeature featureisis engaged engagedby byclosing closing door door and and pulling pulling I stopper back back the the slide slide lever lever which which allows allowsthe the door door to to close close but but not latch not latch partinstalls installs by by pushing I part pushing through through cut-out cut-out and and snapping snapping into into place place applicablematerial materialthickness: thickness:1.50mm 1.50mm -- 2.30mm 2.30mm I applicable
.54 13.8
TOP VIEW TOP VIEW
.35 9.0
Material Material
.63 [16.0] 16.0 .63
.31 8.0
.22 5.5 .39 10.0
.724 18.4
.717 18.2 ::`
.87 22.0
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
END VIEW VIEW END
R.012 MAX. R.012 MAX CORNER CORNER
SLIDE LEVER LEVER SLIDE
1.433 36.4 36.2 1.425 7.42536.2
.71 [18.0] 18.0 .71
1.42 36.0 FRONT VIEW FRONT VIEW
STOPPER STOPPER DOOR DOOR
.12 [3.0-1 3.0 .12 .04 [1.01 1.0 .04
LATCH LATCH ASSEMBLY ASSEMBLY
.394 10.01 .394110.011 .386 L 9.81 9.81 .386
.091 r2.302.30 .091 .059 1.49 .05911.49
KEEPER KEEPER & FRAME FRAME STRIKE STRIKE ENGAGED STRIKE STRIKE LAYOUT LAYOUT ENGAGED
ENGAGED STOPPER STOPPER LAYOUT LAYOUT ENGAGED
Push Latch PushButton ButtonSlam Slam Latch CD Part Number
1127 1127 .87 22.0 .67(22.01 CENT.
Material Material
Finish Finish
die zinc die cast cast zinc
nickel nickel plated plated
111
M3 NO THD. TN°. HOLE .14 [3.5] 1.16 RS (2) PLCS. PLCS. (X)
.31 60 8.0 .31( - )
.47 12.0
+.01 +.2 .40 - .00 10.2 .0 .40!:80[10.2.:g] TOP VIEW on NEw
.39 10.0 .3a[10.0]
.15 3.8 .1510.61 1.28 32.6
▪
.69 17.6 .60117.61
+.00
+.1
.87 - .00 22.0 .87!:00 [22.01 .0 CENT. CENT.
.126 3.20 0.126[3.20] (2) HOLES HOLES (2)
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
FRONT VIEW FNONTVIEW
Spring Loaded Plastic Plastic Slide Slide Latch Latch Spring Loaded Part Part Number Number
1134P 1134P
Material Material
Finish Finish
plastic plastic
black black textured textured
springmaterial: material: 304SS 304SS I spring partinstalls installs by by pushing I part pushing through through cut-out cut-out and and snapping snapping into into place place applicablematerial materialthickness: thickness:.03[.8] .03[.8]-- .09[2.3] .09[2.3] I applicable 1.73 44.0 . 0] -11.73[99 F R A M E
.98 25.0 .86[21.9] .86 21.9 .98[25.0]
DOOR
1.10 28.0 1.10E284
+.00 .0 1.00 - .01 25.5-.2
li
1.48 37.6 .68 17.3 68 [17.3] r•-1.913[37.6] .12 3.0]'1y .12[3.0
..08 08 [22.0 . 0]
+.04 +1.0 .49 - .02 12.5 - .5
+.01 +.2 1.50 - .00 38.0 .0
.28 7.1 .74 18.8 96[,8.0]
66
Download 3DmoDELs @ @www.spep.com www.spep.com Download
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Ins. •ctrial Hardware Hardware
119102ZN 119102ZN
Material Material
Finish Finish
steel steel
zinc plated zinc plated
1.97 [50.0] 50.0 1.97 1.50 [38.0] 38.0 1.50 CENT. CENT.
diecast cast steel steel bolt I die bolt .40 [10.2] 10.2 .40
En
Latches
Slam Slam Latch Latch Part Number Part Number
1.06 27.0 1.06[27.0] 1.42 [.0] 1.42 36.0 CENT. CENT.
.74 18.87j .39 [10.0] 10.0 .7408.8 .39 .039 [1.00] 1.00 THK. THK. .039
Steel Plastic Knob Steel Slam Slam Latch Latch with with Plastic Knob Part Part Number Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
119101ZN 119101ZN
2.01 [51.0] 51.0 2.01 1.40 35.6 1.40 [35.6] CENT. CENT.
plastic ball ball knob knob I plastic
1.39 [35.2] 35.2 1.39
A
A
1.14 29.0 1.62 [41.2] 1.62 41.2 1.14 [29.0] CENT. CENT.
.79 [no] 20.0 .79
.200 [5.08] 5.08 0.200 (4) HOLES HOLES (4)
1.00 [25.4] 25.4 01.00 PLASTIC BALL BALL KNOB KNOB PLASTIC WITH 114-20 1/4-20 THD. WITH THD. BRASS INSERT INSERT BRASS
.50 12.7
4.15 105.3 SECTION A-A
Slam Slam Latches Latches Material Material
Finish Finish
171HN01 171HNO1
Part Part Number Number
304SS 304SS
electropolished electropolished
171ZN01 171ZNO1
steel steel
zinc plated zinc plated
1.50 38.1 ].87[22.2 .87 22.2
1.25 31.8 125[31.8]
vinyl end end cap cap ►vinyl
.86 21.8 .86[21.8] .37 3 9.441jSQ. 11 .171 4.34 HOLE HOLE 0.171[434] (4) PLCS.
.75 19.1 .75[19.1
.87 22.0 ] 37[223 .093 2.35 .093[2.35] THK. 30°
le
-111,1 1 1 11 11 1,11111 11 1
J
11.03 031 26.3 6 31 :
Slam Latch Part Part Number Number
1195ZN 1195ZN
Material Material
Finish Finish
steel steel
zinc plated zinc plated
2.88 [73.1] 73.1 2.88
vinyl end end cap cap ►vinyl 2.00 50.8
1.25 31.9
.50 12.7 SQ.
1.50 38.1
1.81 46.0
.266 6.76 HOLE 0.266[6.76]
(4) PLCS.
4.80 .76 19.4 .78 [19.4] .189 '187(4 r] THK.
45°
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.34 34.1
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
67 67
Latches
-MCIFIC dr
ENGINEERING AND PRODUCTS
Slam Slam Latch Latch Part Number Part Number
(4) STEEL RIVETS
1196 1196
via CO
1.63 41.3
3.75 95.3 3.00 76.2 3.75 95.3] 390[78.2]
Material Material
Finish
steel steel
zinc plated zinc plated
I nylon nylonstriker striker
.200 5.08 x.500[ x .500[ 12.71 12.7 ] 0200[5.08] OBROUND OBROUND .218 [ 5.54 ] 0.218[5.541 (2) HOLES
we can we can supply supply custom custom rods rods )
2.17 55.1 F.-2.17[55.1]
.56 [14.2] 14.2 .58
2.00 50.8 38.4 2.00 [50.8] -1 1.51 [38.4]
.68 17.2 .88[17.2]
Slam Slam Latches Latches (4) RIVETS
.200 5.08 x.500[12.71 x .500[ 12.7 ] 0.200[5.08] OBROUND (2) PLCS.
2.50 63.5 2.00L50.8] 50.8 2.50 63.5] 2.00
.93 23.6 .93[23.6]
HOLES (2) PLCS.
94.0 1.4)-3.703.70 [9CO]
Part Part Number Number
Holes Holes
Material Material
Finish Finish
1197 1197
Ø.193 0.193
steel steel
electro black black electro painted painted
1198 1198
Ø.209 0.209
steel steel
electro black black electro painted painted
nylonstriker striker I nylon
.68 17.3 .68[17.3]
14.2 .56 [14.2]
2.10 [53.3] 53.3 2.10 53.3 2.10[53.3] -.1..-2.10 -"I
Slam Slam Latch Latch Part Number Part Number
1192 1192
(2)RIVETS
x .512[ 13.001 13.00 ] .197 5.00 = 0.197[5.00] OBROUND
Material Material
Finish Finish
steel steel
electro black electro black painted painted
nylon striker
1.13 28.6 1.63 41.3 1.13 1.83[41.3] .219 [5.58] 5.56 0.219 (4) HOLES 1.25 31.8 1.25[31.8] .52 13.1 .52[13.1]
1 2.00[50.8] 2.00 50.8 30.3 -11.19 1.19 [30.3]
.68 17.3 .88[17.3] /
)1 ./
Finger Pull Pull Latch Finger Latch Part Number Part Number
1190 1190
(2) RIVETS
28.6 1.13 28.8]
1.63 41.3] 41.3 1.83
.219 5.56 0.219[5.56] (4) HOLES
Material Material
Finish Finish
steel steel
blue zinc zinc plated blue plated
nylon striker
1.25 31.8 1.25[31.8]
.52 13.1 .52[13.1]
2.00 50.8 2.00[598]
2.05 52.1 2.05[52.1] .85 21.6 .85[219]
.68 17.3 .68[17.3] /
Slam Slam Latches Latches Part Number Part Number 2.63 66.7 ]2.83[88.7]-1
2.00 50.8 2.00[50.8]
18.8 ..74 74[18 .8]
SPOT CLINCH (2) PLACES .99 25.1 ]r - 99[25.i .72 18.2 .72[18.2] /
68 68
Download www.spep.com Download3DmoDELs @ @ www.spep.com
1.50 38.1 1.50[38.1]
1.94 49.2 194[499]
.204 5.18 0.204[5.18] (4) HOLES
Material Material
Finish Finish
1194 1194
steel steel
zinc plated zinc plated
1194-01 1194-01
steel steel
zinc plated zinc plated
diecast cast zinc zinc strike strike I die part no. 1194-01 has has 1/2 tension as as the I part no.1194-01 1/2 the the spring spring tension the 1194. 1194.
.25 6.4 0.25[6.4] h..52 13.1 .52[13.1]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and and Inch Industrial Hinges •ctrial Hardware Hardware
1193 1193
Material Material
Finish Finish
steel steel housing housing powder powder metal metal bolt bolt
mill mill
key sold sold separately separately (part (part no. J3026) I key no. J3026) turnring ring sold sold separately separately (part (part no. J3027) I turn no. J3027)
Latches
Slam Slam Latch Latch Part Part Number Number
(2) LOCATOR DIMPLES DIMPLES (2) LOCATOR
4.61 117.1 4.61[117.1]
.059 1.50 .059[1.501i
.30 7.6 L.30[7.6]
TOP VIEW T FMAI .40 10.1 40[10.1]-.-
.98 24.8 .98[24.8]
.51 13.0 .51[13.0]
KEY KEY HOLE HOLE
.52 13.2 .52[13.2]
1193
1.97 50.0 1.97[50.0]
5.61 142.5 5.61[142.5]
.99 25.2 .99[25.2]
(AP
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW
J3026 J3026
J3027 J3027
Cab Latches Cab Latches Description Description
Material Material
Finish Finish
315RSS 315RSS
Part Part Number Number
right right hand hand
304SS 304SS
mill mill
315LSS 315LSS
left left hand hand
304SS 304SS
mill mill
1.36 34.5 .260 6.60 HOLE (2) PLCS.
.68 17.3
SPOT WELD (6) PLCS.
cast stainless stainless steel steel bolt I cast bolt accepts 313" .313" sq. sq. shafts shafts I accepts righthand handlatch latchrequires requireshandle handlewith with clockwise clockwise rotation I right rotation left hand handlatch latchrequires requires handle handlewith with counter counter clockwise clockwise rotation I left rotation
.97 24.5
ACCEPT .312 [7.93] SQ. SHAFT 2.88 73.0
3.39 86.1
1.78 45.2
.93 23.6
1.19 30.2
.260 6.60 x .450[ 11.43 ] OBROUND, (4) PLCS.
25° CCW ROTATION
.93 23.6 1.25 31.8
right right hand hand shown shown
.65 16.6
2.00 50.8 240[50.8]
.43[10.9] 10.9
Cab Latches Cab Latches Part Part Number Number
315RSS-01 315RSS-01 315LSS-01 315135-01
Description Description
Material Material
Finish Finish
right right hand hand
304SS 304SS
mill mill
left left hand hand
304SS 304SS
mill mill
315RZN-01 4100 315RZN-01
right right hand hand
steel steel
zinc plated zinc plated
31512N-01 4100 315LZN-01
left left hand hand
steel steel
zinc plated zinc plated
cast stainless stainless steel steel bolt I cast bolt accepts 313" .313" sq. sq. shafts shafts I accepts righthand handlatch latchrequires requireshandle handlewith with clockwise clockwise rotation I right rotation left hand handlatch latchrequires requires handle handlewith with counter counter clockwise clockwise rotation I left rotation inside handle handlewill will not override outside handle when when locked locked I inside not override outside handle
1.36 34.5 136[34.5] .260 6.6 HOLE HOLE 0260[6.6] (2) PLCS.
.68 17.3 68[17.3]-""
left left hand hand shown shown
0:40 1.06 27.0 1413[27.4]
SPOT WELD WELD SPOT (6) PLCS. (3) PLCS.
.97 24.5 .97[24.5]
2.88 73.0 2.88[73.0]
3.39 86.1 3.39[86.1]
.93 23.6
1.78 45.2 1.78[45.2]
30.2 93{23 61 11.19 19[30 2]
.260 6.6 x .450[ 11.43 ] 6.280[84]x.450[11.43] OBROUND, (4) PLCS.
.93 23.6 .93[234]
25° CCW CCW 25° ROTATION
1.25 31.8 1.25[31.8]
1.18 29.9 .65 16.6
3.75 95.2 3.75[95.2]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
2.00 50.8 2.00[50.8]
.43 10.9
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
69
Latches
-24CR"C ENGINEERING AND PRODUCTS Slam Slam Action Action Strikes Strikes Part Part No. No.
Material Material
Finish Finish
Studs Studs
L800 L800
die die cast cast zinc zinc
yellow yellow zinc zinc
yes yes
L801 L801
die die cast cast zinc zinc
yellow yellow zinc zinc
no no
co
with studs
ROD SLIDES SLIDES OUT OUT OF OF LATCH LATCH WHEN WHEN ROD HANDLE IS IS TURNED TURNED TO TO DISENGAGE DISENGAGE HANDLE
ROD IS IS SLAMED SLAMED INTO INTO ROD LATCH LATCH TO TO ENGAGE ENGAGE 3.00 76.2 3.00[76.2]
1/4-20 THREAD THREAD 1/4-20 C'SINK WITH 90 WITH 90° C'SINK ON ON BOTH BOTH SIDES SIDES
90° 90° 45° 45°
.50 12.7 .50[12.7]
CL .31 7.9] 7.9 .31
without studs without studs
SPEP.COM
O
.531 [13.50] 13.50 0.531
1.25 31.8
0
1.25 31.8
.51 [13.0] 13.0 .51
0
.18 [4.6] 4.6 .18
ACCEPTS UP ACCEPTS UP TO TO .375[ 9.53 9.53 ]] ROD ROD 0.375[
2.28 58.0 2.28[58.0] FRONT VIEW VIEW FRONT
.50 12.7 RIGHT SIDE SIDE VIEW VIEW RIGHT WITH STUDS STUDS WITH
RIGHT SIDE SIDE VIEW VIEW RIGHT WITHOUT STUDS WITHOUT STUDS
Slam Slam Action Action Strike Strike 45°
Part Part No. No.
1/4-20 THREAD WITH WITH 90 90° C'SUNK ON BOTH SIDES
2.00 50.8 -2.00[50.8] 90°
L803 L803
Material Material
Finish Finish
die cast cast zinc zinc die
yellow zinc yellow zinc
1.25 31.8 .81 20.6 .81[20.6]
.51 13.0
O SPEP.COM
.50 12.7 .50[12.7]
.81 20.6 .81[20.6]
.63 16.0 ] .63[16.0
—
RIGHT SIDE SIDE VIEW VIEW RIGHT
FRONT VIEW FRONT VIEW
Compartment Latch Latch Compartment Part Part Number Number
4.33 [110.0] 4.33[110.0)
1180 1180
MMM I
[55.9] 2.20 [55.91
:Ptrryf uFf -Eir inim
65° 2.16 [54.91 [54.9] 2.16
1.69 [42.9] 1.69[42.91
Material Material
Finish Finish
steel body steel body
zinc plated zinc plated
highimpact impact nylon nylon catch catch I high
Ø.250 [6.35)x.375 [6.35] x .375 0.531 [9.53] 0.250 (4) OBROUNDS .40 AO [10.2] [10.21
2.16 [54.9] 2.16[54.91 1.07 [27.2] 1.07[27.21
[3.05] _..120 120 (3.051
Small Venting Latch Latch Small Explosion Explosion Venting .324 8.23 HOLE HOLE 0.924[8.29] (4) PLCS. PLCS. (4)
2.000 50.80 2.000[50.80]
2.000 50.80 2.000[50.80]
Part Part Number Number
Material Material
Finish Finish
174 174
cast iron cast iron housing housing
zinc plated zinc plated
slottedscrew screwon onback back for for latch latch tension I slotted tension adjustment adjustment adjustablerelease releaseforce: force:10 10 -- 45 45 lbs. lbs. I adjustable
1.990 50.55 MAX. 1.99o[50.5.5]
1.960 [[49.79] 49.79 ] MIN. MIN. 1.960 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
See our See our industrial industrial pull pull section section on on page 17. page 17. 2.00 50.8 2.00[50.8]
2.61 [66.3] 66.3 2.61
.324 8.23 HOLE HOLE 0.324[823] (2) PLCS. (2)
2.00 AO 50.8
TOP VIEW T
2.09 [53D] 53.0 2.09
FRONT VADS FRONT VIEW
70 70
Download 3DmoDELs @ @www.spep.com www.spep.com Download
We also We also offer offer aavariety varietyof ofbutt butt hinges. hinges. Refer 77 & & 221. Refer to to pages pages 77 221.
.324 [823] 8.23 HOLE HOLE 0.324 (2) PLCS.
.39 9.8 .39[9.8]
35.7 1.41 [35.7] TOP VIEW T
3.45 87.6 345[876]
2.65 67.3 2.65[67.3]
1.75 44.4 1.75[44.4]
1.24 31.6 1.24[31.6] FRONT VIEW VIEW FRONT
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial •ctrial Hardware Hardware
Material Finish 1 Material i Finish
176 176
cast iron cast iron housing housing
hexscrew screw on on back back for for latch I hex latch tension tension adjustment adjustment adjustablerelease releaseforce: force: 43 43 --180 180 lbs. lbs. I adjustable
n
.406 10.31] HOLE HOLE 0.406[10.31 (4) PLCS. (4) PLCS.
zinc plated zinc plated
Lsoo[66.04
2.600 66.04
Latches
Large Latch Large Explosion Explosion Venting Venting Latch Part Part Number Number
2rto
2.600 66.04 2.600[66.04]
See our Grab Handle, 917 no.917 our Grab Handle, part part no. Irr See on 18. on page page 18.
2.880 73.15 MAX. MAX. 2.880[73.15
2.820 [[ 71.63] 71.63 ]MIN. MIN. 2.820
We also We also offer offer aavariety varietyof ofbutt butt hinges. hinges. Refer 77 & & 221. Refer to to pages pages 77 221.
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
3.88 98.6
2.60 66.0
2.60 66.0
.406 10.31 (2) HOLES
3.88 98.4
.406 10.31 (2) HOLES
.73 18.5
1.88 47.6
TOP VIEW /GE_VJEN
TOP VIEW VIEW TOP
2.46 82.6] 62.6 2.48[
2.13 54.2 2.13 [54.2]
1
4.94 125.5 4.94 [125.5]
1.71 43.4 -•-1 1.71[09.0]
FRONT VIEW EIMUCLYIEW
-
FRONT VIEW ER0111.1Y9MIV
Large Large Explosion Explosion Venting Venting Latch Latch with with Handle Handle Part Part No. No.
Handle Handle
Material Material
Finish Finish
176-01 176-01
left left hand hand
cast iron cast iron housing housing
zinc zinc plated plated
cast iron right righthand hand cast iron housing housing
zinc zinc plated plated
176-02 176-02
.406 10.31 ] HOLE HOLE 0 .406[10.31 (4) PLCS. (4) PLCS.
2.600 66.04 2.600[66.04
hexscrew screw on on back back for for latch I hex latch tension tension adjustment adjustment adjustablerelease releaseforce: force: 43 43 --180 180 lbs. lbs. I adjustable shims available available I shims
2.600 66.04 2.600[66.04]
2.880 73.15 MAX. MAX. 2.880[73.15 2.820 [[ 71.63 71.63]]MIN. MIN. 2.820 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
left left hand hand shown shown .73 18.5 .73[18.5]
3.88 98.4 3.88[98.4] TYP. TYP.
1.88 47.6 1.88[47.6]
a
2.60 66.0 2.60[66.0] TYP. TYP.
.406 10.31 10.31 ] TYP. TYP. .406[ HOLE, HOLE, (2) (2) PLCS. PLCS.
.406 10.31 HOLE HOLE 0.406[10.31] (2) PLCS. (2) PLCS.
TOP VIEW VIEW TOP 6.8 174
3.30 83.8 2.13 54.2] 54.2 2.13[
2.46 62.6
1
17
1.71 43.4
4.94 125.5 4.94[125.5] FRONT VIEW FRONT VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.555411111
[email protected] To PlaceOrder: Order ta 800.433.5554
[email protected]
71 71
Latches
SIERRA PACIFIC
AND PRODUCTS
Small Steel Slam Slam Latches Small Stainless Stainless Steel Latches Small Slam Small Slam Latches Latches 2.16 54.9
Part Part Number Number
1.63 41.3
.69 17.6 .69[17.6]
Material Material
123SS 12355 123SSP alP 12355P
.39 10.0
Finish Finish
cast 304SS cast 304SS
brushed brushed
cast 304SS cast 304SS
hand polished hand polished
all components componentsare are 304SS 304SS I all 2.31 58.7
•
1.38 34.9
HOLE .181 4.60 HOLE .181[4.80] FOR #8 FOR #8 SCREW SCRE (8) PLACES (8) PLACES
4.16 105.6
1.112 28.24 1.112[28.24] MIN. MIN.
.625 15.88 825[15.88]
C'SUNK HOLE HOLE CSUNK #8 F.A.S. F.H.S. FOR A #8 (4) PLACES
1.625 41.28 1.094[27.78] 1.094 27.78 1.825[41.28]
.54 13.7
1.09 27.8
1.98 50.3
1.625 41.28 1.825[41.28]
4_.049[1.28] .049 1.26
1.375 34.93 1.375[34.93]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Small Keepers Small Keepers
.63 15.9 .63[15.9]
Part Description PartNumber Number Description 1.63 41.3 1.63[41.3
C'SUNK HOLE HOLE CSUNK #8 F.A.S. F.H.S. FOR AA #13 (4) PLACES
TOP VIEW TOP VIEW
A -oh A
ri
HEIGHT
Grip Grip
Height Material Finish Height Material Finish
123SS-K1 12355-K1
short keeper short keeper
flush to to .50 .50 [12.7] [12.7] flush
1.78 [45.1] [45.1] 1.78
brushed brushed
123SSP-K1 12355P-K1
short keeper short keeper
flush to to .50 .50 [12.7] [12.7] flush
1.78 [45.1] [45.1] 1.78
hand hand polished polished
123SS-K2 410P 12355-K2
tall keeper .56[14.3] [14.3]to to1.25 1.25 [31.8] 2.32[58.9] [58.9] tall keeper .56 [31.8] 232
123SSP-K2 401) 12355P-K2
tall keeper .56[14.3] [14.3]to to1.25 1.25 [31.8] 2.32[58.9] [58.9] tall keeper .56 [31.8] 232
cast cast 304SS 304SS
brushed brushed hand hand polished polished
all components componentsare are 304SS 304SS I all GRIP
A 225[57.2] 2.25 57.2
1.50 38.1
FRONT VIEW FRONT VIEW
SECTION A-A A-A IFCMON
Large Steel Slam Slam Latch Latch Large Stainless Stainless Steel Large Latch Large Slam Slam Latch Part Part Number Number 2.60 66.2 2.60[66.2] .81 20.6 --1.81120.61
2.05 52.0 2.05[52.0] .61 15.6
Material Material
Finish Finish
122SS 12255
cast 304SS cast 304SS
brushed brushed
122SSP 12255P
cast 304SS cast 304SS
hand polished hand polished
all components componentsare are 304SS 304SS I all 1.25 31.8 1.25[31.8]
3.00 76.2 3.00[76.2]
HOLE .205 5.20 ]HOLE 1.057 26.86 .205[5.20 1.057[28.88] FOR #10 SCREW MIN. FOR #10 SCREW MIN. (8) (8) PLACES PLACES
5.21 132.3 5/1[ 32.3
.787 20.00 .787[20.00]
C'SUNK HOLE CSUNK FOR A4610 #10 F.H.S. FOR FAS. (4) PLACES
2.047 52.00 1.772[45.00] 1.772 45.00 2.047[52.00]
2.047 52.00 2.047[52.00]
.65 16.5 .65[16.5
0 0 1.250 31.75 1.250[3 .75] 1.77 45.0 1.77[45.0]
2.47 62.8 2.47[62.8]
.043 1.10] ~~.043[1.10 MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Large Large Keepers Keepers .79 20.0
2.05 52.0
Part Description PartNumber Number Description
122SS-K1 12255-K1
C'SUNKHOLE HOLE CSUNK FOR A810 #10 F.H.S. FORA F.H.S. (4)PLACES PLACES (4)
122SSP-K1 400 12255P-K1
TOP VIEW
122SS-K2 12255-K2
A
122SSP-K2 40N) 12255P-K2
Grip Grip
Height Height
Material Material
Finish Finish
short keeper keeper short
flush to to .38 .38 [9.6] [9.6] flush
short keeper keeper short
flush to to .38 .38 [9.6] [9.6] flush
1.78 [45.1] [45.1] 1.78
brushed brushed
1.78 [45.1] [45.1] 1.78
cast cast 304SS 304SS
hand hand polished polished
tall keeper tall keeper
.50 [12.7] [12.7] to 1.25 [31.8] [31.8] .50 to 1.25
2.32 [58.9] [58.9] 2.32
tall keeper tall keeper
.50 [12.7] [12.7] to 1.25 [31.8] [31.8] .50 to 1.25
2.32 [58.9] [58.9] 2.32
brushed brushed hand hand polished polished
all components componentsare are 304SS 304SS I all HEIGHT GRIP
A A 2.68 [68.0 68.0 2.68 TOPVIEW VIEW TOP
72 72
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1.38[352 35.0] 1-.-138 SECTION A-A IBM0 ,14-4
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hingesand andIndustrial Industrial Hardware bfrrdWare Hires
Description Description
Material Material
Finish Finish
1186-G 1186-G
left left hand hand
steel steel
mill mill
1186-D 1186-D
right right hand hand
steel steel
mill mill
1186-D01 1186-D01
right right hand hand
aluminum aluminum
mill mill
.750 19.05
Latches
Weld-on Slam Weld-on Slam Action Action Latches Latches Part Part Number Number
4.21[ 4.21 107.0 074] .500 12.70
45° 4
1/4" GREASE GREASE 1(4' FITTING FITTING
left hand
1.125 28.58 1.125[28.58
.35 8.9 .35[8.9] 5.68 144.3 5.69[144.3]
.95 24.1 .55[24.1]
right right hand hand
Tipper Latches Tipper Latches Part Part Number Number
Material Material
Finish Finish
Holes Holes
J2089 J2089
steel steel
mill mill
round round
J2089-01 J2089-01
steel steel
mill mill
round round
J2089-02 J2089-02
steel steel
mill mill
round round
J2089-03 J2089-03
steel steel
zinc plated zinc plated
obround obround
1.13 28.6 1.13[28.6]
J2089-01
.375 9.53 xx.9381 .938[ 23.8a 23.83 ] 0.375[9.53] OBROUND OBROUND (2) PLCS. PLCS. (2)
lever and and bolt bolt zinc zinc plated I lever plated part no. no. J2089 J2089 is I part is shipped shipped unassembled unassembled
/4 1 14
2.00 50.8
.385 9.78 HOLE HOLE 0.386[078] (2) PLCS. PLCS. (2)
4.48 113.9 4.48[113.9]
7 1.50 38.1 1.50[38.1]
1
note bolt orientation note bolt orientation
J2089-02 J2089-02 in in open open position position
J2089-02 J2089-02
2.23 56.7 2.23[56.7]
•-..177[4.50] .177 4.50 THK. THK.
Toggle Latch Latch Toggle Part Part No. No.
D434 D434
Material Material
Finish Finish
plastic plastic
black black
pushto toclose close and and push push to I push to open open
1.02 [26.o] 26.0 1.02
.52 13.2
.98 [25.0] 25.0 .98 CENT. CENT.
.11 2.9 .11[2.9] REF.
.49 12.5 .49[12.5]
.14 3.6 .87 [22.0] 22.0 .87
1.46 [37.0] 37.0 1.46
.236 [6.0015 [6.00] x .118 .118 [3.00] [3.00] OBROUND OBROUND WITH WITH .236 .315 [8.00] [8.00] xx .197 .315 .197 [5.00] Nam x .087 [2.20] DEEP C'BORE (4) PLCS.
Part Part Number Number
D440 D440
22.0 .87 [22.0] CENT. 1.43 36.3 1.43[36.3]
41D
Material Material
Finish Finish
steel steel
zinc plated zinc plated 1.91 48.5
whitepolyethylene polyethylene rollers rollers I white
1.61 41.0
.61 15.5 .57 14.5
Roller Roller Catch Catch
.126 3.20 X X .394 .394 [10.00] [10.00] .126 [3.20] OBROUND, OBROUND, (2) (2) PLACES PLACES
.59 15.0 .04 1.0 .04 [1.0] IL
.59 15.0 .59 [15.0]
T .122 [3.10] 3.10 .122 (2) PLACES (2) PLACES
1.20 30.5 •-•-1.20 [30.5] .59 15.0 59 [15.0]
.03 .8 .03[3] Request Info
.51 [13.0] 13.0 .51
-t
1-800-453-1692 www.aboveboardelectronics.com
.28 7.0 .28 [7.0] .98 25.0 .98 [25.0] 32.0 1.26 [32.0] 1.26
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
73
Latches
SIERRA 'MCIFIC ENGINEERING AND PRODUCTS
Snap-In Magnetic Catches Catches Snap-In Magnetic Large Large .38 .005 9.65 .13
A
58.4 2.30 [58.4]
56.9 2.24 [56.9]
.43 [10.9 0.9]
1.3 .05 [1.3]
FRONT VIEW FR 11''VIEW
19.1 .75 [19.1]
2.25 .005 57.2 .13
REAR VIEW REAR VIEW
D392BK D392BK
.01 [.3] .01 [.3]
.02 [.5] [.5] -- .08 .02 .08 [2.0] [2.0]
D392BK-01 D392BK-01
.07 [1.8] .07 [1.8]
.08 [2.0] [2.0] -- .14 .08 .14 [3.5] [3.5]
D392BK-02 D392BK-02
.13 [3.3] .13 [3.3]
.14 [3.5] [3.5] -- .20 .14 .20 [5.0] [5.0]
Part Number Part Number
blackpolypropylene polypropylene housing housing I black steel,zinc zinc plated plated end end plates plates I steel, approximateholding holdingforce: force:14.0 14.0 lb lb [62.3N] [62.3N] I approximate uses strike strike part part no. D392S-01 & & D392S-02 I uses no. D3925-01 D3925-02 see below see below for for more more details details
.37 9.4] 9.4 .37
RIGHT SIDE RIGHT SIDE VIEW VIEW
A A
Panel Thickness Panel Thickness (min. -max.) (min.-max.)
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Small Small 8.13 .13 .320 .005 [8.131.13] .3201.005
A
1.55 39.4
37.7 1.49 [37.7]
1.500 .005 [38.101.13] 38.10 .13 1.5001.005
Rai ci)
.37 9.4 .37[9.4]
.03 .8 .03[.8]
FRONT VIEW FRONT VIEW
.94 23.9 7.9 .31[7.9] .94 [219] .31 RIGHT SIDE RIGHT SIDE VIEW VIEW
.75 19.1
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
REAR VIEW REAR VIEW
D395BK D395BK
.04 [1.0] .04 [1.0]
.02 [.5] .08 [2.0] [2.0] .02 [.5] --.08
D395BK-01 D395BK-01
.10 [2.5] .10 [2.5]
.08 [2.0] [2.0] -- .14 .08 .14 [3.5] [3.5]
D395BK-02 D395BK-02
.16 [4.0] .16 [4.0]
.14 [3.5] [3.5] -- .20 .14 .20 [5.0] [5.0]
Part Part Number Number
2
8
A A
Panel Thickness Thickness Panel (min. -max.) (min. -max.)
blackpolypropylene polypropylene housing housing I black steel,zinc zinc plated plated end end plates plates I steel, approximateholding holdingforce: force:8.0 8.0 lb lb [35.6N] [35.6N] I approximate uses strike strike part part no. D395S-01 & & D395S-02 I uses no. D3955-01 D3955-02 see below see below for for more more details details
44111P
.079 2.00 079 [2.00]
Strikes Strikes
.19 4.8
C'SUNK HOLE HOLE C'SUNK FOR AN AN M3 M3 OR OR #5 #5 FOR FLAT HEAD HEAD SCREW FLAT SCREW
.75 19.1
Part Number Part Number
r_
.094 2.40
ADHESIVE ADHESIVE
X
X
LOCATING LOCATING PRONGS PRONGS
Dim X X Dim
D392S-01 D3925-01
self-adhering self-adhering
2.00 2.00 [50.8] [50.8]
D392S-02 D3925-02
screw-mounting screw-mounting
2.00 2.00 [50.8] [50.8]
D395S-01 D3955-01
self-adhering self-adhering
1.25 [31.8] 1.25 [31.8]
D395S-02 D3955-02
screw-mounting screw-mounting
1.25 [31.8] 1.25 [31.8]
material: steel steel I material: finish:zinc zinc plated plated I finish:
SELF-ADHERING SELF-ADHERING
SCREW-MOUNTING SCREW-MOUNTING
Description Description
Snap-in Catch Snap-in Magnetic Magnetic Catch
CUT-OUT HOLE .54 13.6
TOP TOP VIEW VIEW
.591 [15.00] 15.00 0.591
Part Part Number Number
Holding Holding Force Force lbf lbf [N] [N]
D411 D411
approx. approx. 1.5 1.5 [6.9] [6.9]
Panel Panel Material Material
Panel Thickness Panel Thickness
Cut-out Hole Cut-out Hole
steel steel
.031 [.79] .031 [.79] -- .055 .055 [1.40] [1.40]
Ø.449 [11.40] -- Ø.453 0.449 [11.40] 0.453 [11.50] [11.50]
steel steel
.055 [1.40] .118 [3.00] .055 [1.40] --.118 [3.00]
Ø.469 [11.91] -- Ø.472 0.469 [11.91] 0.472 [12.00] [12.00]
resin resin
.055 [1.40] .055 [1.40]
Ø.445 [11.30] -- Ø.453 0.445 [11.30] 0.453 [11.50] [11.50]
color: white white I color: plastichousing housing and and cover cover I plastic steelzinc zinc plated plated yoke yoke plates plates I steel
MOUNTING DIMENSIONS
.66 16.7 .66[16.7]
.433 11.00 0.433[11.00]
C_) FRONT FRONT VIEW VIEW
74
Download www.spep.com Download3DmoDELs @ @ www.spep.com
RIGHT SIDE SIDE VIEW VIEW RXi1R
REAR VIEW REARVIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and andInch Industrial Hinges •ctrial Hardware Hf-rdware
Part Part Number Number
A A
D393BK D393BK
.030 [.80] .030 [.80]
.020 [.50] .080 [2.00] [2.00] .020 [.50] -- .080
D393BK-01 D393BK-01
.090 [2.30] .090 [230]
.080 [2.00] [3.50] .080 [2.00] -- .140 .140 [3.50]
D393BK-02 D393BK-02
.150 [3.80] .150 [3.80]
.140 [3.50] [5.00] .140 [3.50] -- .200 .200 [5.00]
Latches
Small Catches Small Snap-In Snap-In Magnetic Magnetic Catches
Iy
Panel Panel Thickness Thickness (min. (min. -max.) -max.)
MAGNET MAGNET
blackpolypropylene polypropylene housing housing I black steel,zinc zinc plated plated end end plates plates I steel, cut-out:0.563 Ø.563+.005/-.000 +.005/-.000[14.30 [14.30 ±.13/.00] ±.13/.00] I cut-out: approximateholding holdingforce: force:5.5 5.5lb. lb. [24.5N] [24.5N] I approximate
440
A A
+.005 +.13 .563 - .000 14.30 .00)] 5 [14.30+:1? 0.563+::
PF n
.55 13.9 0.55[13.9]
.630[1 16.00 6.00] 0 .630
.03 .8 .03[ .8
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
.81 20.6 .81[20.6]
Large Snap-In Catches Large Snap-In Magnetic Magnetic Catches A A
Panel Panel Thickness Thickness (min. (min. -max.) -max.)
D394BK D394BK
.020 [.50] .020 [.50]
.020 [.50] .080 [2.00] [2.00] .020 [.50] -- .080
D394BK-01 D394BK-01
.080 [2.00] .080 [2.00]
.080 [2.00] - .140 [3.50] [3.50] .080 [2.00] -.140
D394BK-02 D394BK-02
.140 [3.50] .140 [3.50]
.140 [3.50] [5.00] .140 [3.50] -- .200 .200 [5.00]
Part Part Number Number
A A
MAGNET
blackpolypropylene polypropylene housing housing I black steel,zinc zinc plated plated end end plates plates I steel, cut-out:0.875 Ø.875+.005/-.000 +.005/-.000[22.23 [22.23 ±.13/.00] ±.13/.00] I cut-out: approximateholding holdingforce: force:11.0 11.0lb. lb. [48.9N] [48.9N] I approximate
+.005 +.13 +.003 .875 22.23 .00 0.87 '13 5- .000 .000 [2223-1.00
.86 21.8 0.86[21.8]
.965 24.50 0.965[24.50]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
.05 1.2 .05[1.2]
1.27 32.3 1.27[32.3] RIGHT SIDE RIGHT SIDE VIEW VIEW
FRONT VIEW FRONT VIEW
Snap-in Catch Snap-in Magnetic Magnetic Catch Part Part Color Number Color Number
D401 D401
white white
Holding Force Force Holding lbf lbf [N] [N] approx. approx. 7.7 [34.3] 7.7 [343]
Panel Panel Thickness Thickness
Cut-out Cut-out Width Width
.031 [.79] .031 [.79]
1.366 [34.70] 1366 [34.70]
.039 [.99] .039 [.99]
1.378 [35.00] 1378 [35.00]
.047 [1.19] .047 [1.19]
1.390 1390 [35.31] [3531]
plastichousing housing and and cover cover I plastic steelzinc zincplated platedkeeper keeper and and yoke yoke plates plates I steel
0 I
1
10.0 .39 39[10.0]
.138 3.50 HOLE HOLE WITH WITH 0.138[3.50] .256 [6.50] [6.50] xx90' 90 C.SINK C'SINK 0.256 (2) PLACES .39 10.0 .39[10.0]
1.59 40.5 ] -.-1.59[ 40.5
WIDTH WIDTH --..-
t
WIDTH
1.26 32.0 ] 1.26[32.0
TOP Dimw r VIEW
.33 8.5
TOP VIEW TOP VIEW
.079 2.00 2.00 ] .079[ CUT-OUT DETAILS
13.5 .44 11.3 .53 44[11.3] 53[115
8.5 .33 [8.5] .33 1.36 36[ 34.5 34.5]
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
t
FRONT VIEW FROMT VIEW
1.65[ 42.0 ] 1.6542.0
.31 8.0 ] .31[ RIGHT SIDE VIEW HT SIDE VIEW
FRONT vox VIEW
Snap-in Catch Snap-in Magnetic Magnetic Catch Part Part Color Number Number Color
D402 D402
white white
Holding Force Holding Force lbf [N] lbf [N] approx. approx. 14.3 [63.8] 14.3 [63.8]
Panel Panel Thickness Thickness
Cut-out Cut-out Width Width
.031 [.79] .031 [.79]
2.205 2.205 [56.00] [56.00]
.039 [.99] .039 [.99]
2.217 [56.31] [5631] 2.217
.047 [1.19] .047 [1.19]
2.228 2.228 [56.59] [56.59]
plastichousing housing and and cover cover I plastic steelzinc zincplated platedkeeper keeper and and yoke yoke plates plates I steel
.39 10.0 .39[10.0]
.138 3.50 HOLE HOLE WITH WITH 0.138[3.50] .256 [6.50] [6.50] x 90° 90 C'SINK 0.256 CSINK (2) PLACES
IIIIIII ---____ IIIIIIII:o. 2.13 54.0 2.13[54.0] .39 10.0 (D1.39[10.0]
2.56 65.0 2.56[65.0]
TOP VIEW
TOP VIEW
.079 2.00 .079[ 2.00 ]r
.45 11.5 .45[11.5
.33 8.5 .33[8.5]
2.19 55.5 2.19[55.5
WIDTH MOUNTING DIMENSIONS
FRONT VIEW VIEW FRONr
.56 14.2 .56[14.2]
2.52 64.0 2.52[64.0
FRONT VIEW
.31 8.0 .31[8.01.33 8.5
RIGHT SIDEVIEW VIEW MIR SIDE
WIDTH
Request Info
1-800-453-1692 www.aboveboardelectronics.com
CUT-OUT DETAILS
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
75 75
Latches
SIERRA 'MCIFIC ENGINEERING AND PRODUCTS
Snap-in Magnetic Catches Catches Snap-in Magnetic = = =
Part Part Number Number
Color Color
Holding Force Force Holding lbf [N] lbf [N]
D407G D407G
gray gray
approx. approx. 4.9 [21.6] 4.9 [21.6]
D407W D407W
white white
approx. approx. 2.9 2.9 [12.8] [12.8]
D408G D408G
gray gray
approx. approx. 4.9 [21.6] 4.9 [21.6]
Panel Thickness Thickness Panel
Cut-out Width
.0197 ±.002 .0197 ±.002 [.500 [.500 ±.05] ±.05]
.89 ±.006 .89 ±.006 [22.6 ±.15] [22.6 ±.15]
.0315 ±.002 .0315 ±.002 [.800 [.800 ±.05] ±.05]
.93 ±.006 .93 ±.006 [23.6 ±.15] [23.6 ±.15]
.0394 ±.002 .0394 ±.002 [1.000 [1.000 ±.05] ±.05]
.89 ±.004 .89 ±.004 [22.6 ±.10] [22.6 ±.10]
.0472 ±.002 .0472 ±.002 [1.200 [1.200 ±.05] ±.05]
.93 ±.004 .93 ±.004 [23.6 ±.10] [23.6 ±.10]
.055 ±.002 .055 ±.002 [1.400 [1.400 ±.05] ±.05]
.94 ±.004 .94 ±.004 [23.9 ±.10] [23.9 ±.10]
.39 9.8 .39[9.8]
.o2[2e.o
1.02 26.0 TOP VIEW
.44 11.1 .44[11.1]
.49 12.5 .49[12.5]
t
.32 8.2 .32[8.2]
.88 22.4 .88[22A]
7
RIGHT SIDE RIGNT SIDE VIEW VIEW
FRONT VIEW VIEW FRONT
WIDTH WIDTH WIDTH
8.3 .33 33[8.3] .33 8.3
D408W D408W
approx. approx. 2.9 2.9 [12.8] [12.8]
white white
MOUNTING MOUNTING DIMENSIONS DIMENSIONS CUT-OUT DETAILS
plastichousing housing and and cover cover I plastic steelzinc zinc plated plated yoke yoke plates plates I steel
Snap-in Catch Snap-in Magnetic Magnetic Catch Part Part Number Number
D403 D403 WIDTH WIDTH
II
.26 6.7 .26 6.7 .26[6.7]
1.77 45.0 1.77 1.77[45.o]
45.01
t
I
I
WIDTH
.20 5.1
t
Cut-out Width Cut-out Width
approx. 6.2 6.2 [27.5] approx. [27.5]
.031 [.79] .031 [.79]
1.571 [39.90] 1.571 [39.90]
approx. 6.2 6.2 [27.5] approx. [27.5]
.039 [.99] .039 [.99]
1.594 [40.50] 1.594 [40.50]
white white
.20 5.1
CUT-OUT DETAILS CUT-OUT DETAILS
.42 10.7 .34 8.7 .34.42 34[8.7] 8.710.7 .42[,0.7]
FRONT VIEW FRONT VIEW FRONTVIEW
Panel Panel Thickness Thickness
WIDTH
TOP TOP VIEW VIEW TOP VIEW
1.56 39.6 1.56 39.6 1.56[39.6
Holding Force Force lbf Holding lbf [N] [N]
plastichousing housingand and cover cover I plastic steelzinc zinc plated plated yoke yoke plates plates I steel
.20 5.0
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Color Color
.19 5.0 .19 5.0 4-k-.19[5.0
RIGHT SIDERNiNT VIEW SIDE VIEW RIGHT VIEW
Snap-in Catch Snap-in Magnetic Magnetic Catch Part Number Part Number .161 4.10 HOLE HOLE WITH WITH 0.161[4.10] .221 [5.60] [5.60] xx 90° 90 C'SINK CSINK 0.221
.67 17.0 67[17 0]
.63 16.00] 63 [16
1.14 [29.0] 29.0 1.14
1.06 [27.0] 27.0 1.06 TOP DIEW F VIEW
TOP VIEW VIEW TOP
.079 [2.00] 2.00 .079 .031 .80 1.031[80]
Holding Force lbf Holding Force lbf [N] [N]
D416 D416
approx. 6.6 6.6 [29.4] approx. [29.4]
aluminum,mill millfinish finish housing housing I aluminum, steel,zinc zinc plated platedkeeper keeper and and yoke yoke plates plates I steel, snaps into intoaa 1mm 1mm thick thick panel panel I snaps
FRONT VIEW FRONT
.94 23.9 ..87 .94[23.9] 87[22A] 22.1
6 1.06 [27.0] 27.0 1.06
.45 11.5 .45[11.5] .43 [11.0] 11.0 .43
FRONT VIEW FRONT VIEW
27.0 1.06 [27.0] 1.06
RIGHT SIDE SIDE VIEW RIGHT 1MIN
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Sealed Catches Sealed Snap-in Snap-in Magnetic Magnetic Catches
EW FP SCJ-:] AMILY 1.51 38.3 1.51[38.3]
.51 13.0 .51[13.0]
TOP TOP VIEW VIEW
MAGNETIC MAGNETIC SURFACE SURFACE
0.03 [0.8] 0.03 [0.8]- -0.08 0.08[2.0] pg PANEL THICKNESS PANEL THICKNESS RANGE RANGE
Part Number Part Number
Finish Finish
Holding Force Force Holding
D436BK D436B K
black black
approx. 6.7 6.7 [30] approx. [30]
D436W D436W
white white
approx. 6.7 6.7 [30] approx. [30]
D436BK-01 D436B K-01
black black
approx. 4.0 4.0 [18] [18] approx
D436W-01 D436W-01
white white
approx. 4.0 4.0 [18] [18] approx
.05 1.2 .05[1.2]
.59 15.0 .59[15.0]
+.2 +.01 .44+.3 - .00 11.2 .0
+.01
.44 - .00 11.2 .0 .4431[11, 1
1.27 32.3 -N-1.27[3Z3] FRONT FRONT VIEW
76 76
Download www.spep.com Download3DmoDELs @ @ www.spep.com
.43 [11.0] 11.0 .43 RIGHT SIDE RIGHT SIDE VIEW VIEW
+.01 +.2 1.29 32.7 .0
+.01 1.29 - .00 32.7 -.0 i.291;[3. ,+.3 .:81.00
MOUNTING DIMENSIONS MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and andInch Industrial Hinges •ctrial Hardware Hf-rdware
Part Part Number Number
Color Color
D405BK D405BK
black black
approx. approx .9 [4.0] [4.0] .9
D405W D405W
white white
1.89 48.0 1.89[48.0] THRU WITH WITH .236 [6.00] .134 3.40 THRU .236 [6.00] xx.134[3.40] C'SINK .358 [9.10] [9.10] xx .256 .256 [6.50] [6.50] xx90' 90 C'SINK .358 (2) OBROUNDS OBROUNDS
.59 15.0] 15.0 .59[ 1
approx. approx .9 [4.0] [4.0] .9
1.50 38.0 1.50[38.0]
.161 4.10 HOLE HOLE WITH WITH 0.161[4.10] C'SINK .256 [6.50] [6.50] xx90' 90 CSINK 0.256 (2) PLACES PLACES (2)
plastic housing housing and and cover cover I plastic 430SS nickel ►430SS nickelplated platedmagnet magnet and and keeper keeper
.14 3.5 .14[3.5]-.1
1.50 38.0 1.50[38.0]
111
Latches
Dust Dust Proof Proof Magnetic Magnetic Catches Catches Holding Force Holding Force lbf [N] lbf [NI]
.47 12.0 .47[12.0]-
1.81 46.0 1.81[46.0]
.059 1.50 .059[1.50]-.1.-
TOP VIEW
END VIEW END VIEW
Dust Dust Proof Proof Magnetic Magnetic Catches Catches Holding Force Part Color Holding Force PartNumber Number Size Size Color lbf lbf [N] [N]
D400BK-01 D400BK-01 D400W-01 D400W-01 D400BK D400BK D400W D400W
small black black small
approx. approx. 2.9 [13.0] 2.9 [13.0]
small white white small
approx. approx. 2.9 [13.0] 2.9 [13.0]
large black large black large white large white
.217 [5.50] .126 3.20 .217 [5.50]xx.128[3.20] (2) OBROUNDS OBROUNDS
1.50 38.0
.35 9.0 .35[9.0]
1.22 31.0 1.22[31.0]
.43 11.0 .43[11.o]
.22 5.5 .22[5.5]
.08 2.0
1.26 32.0 1.26[32.0]
.35 9.0 .35[9.o]-
.138 3.50 HOLE HOLE WITH WITH 0.138[3.50]
approx. approx. 5.2 [23.0] 5.2 [23.0]
.256 [6.50] [6.50] x90° x 90 C'SINK C'SINK 0.256 (2) PLACES (2) PLACES
.059 1.5 .059[1.5]-4-
1.57 40.0 1.57[40.0]
END VIEW END VIEW
TOP VIEW
approx. approx. 5.2 [23.0] 5.2 [23.0] .394 [10.00] .173 4.40 .394 [10.00]xx 0.173[4.40] (2) OBROUNDS OBROUNDS (2)
plastic housing housing and and cover cover I plastic 430SS nickel ►430SS nickelplated platedmagnet magnet and and keeper keeper
.51 13.0 .51[13.0]
1.89 48.0 1.89[48.0]
.83 21.0 .83[21.0] .43 11.0 .43[11.0] 1.50 38.0 1.50[38.0] .138 3.50 HOLE HOLE WITH WITH 0.138[3.50] .256[6.50] [6.50] xx 90 90 ° C'SINK 0.256 CSINK (2) PLACES PLACES (2)
.12 3.0 .12[3.0]-
1.50 38.0 1.50[38.0]
.47 12.0 .47[12.0]
1.81 46.0 1.81[46.0]
.059 1.50 .059[1.50]-4END VIEW
TOP VIEW
Magnetic Catches Color Color
Holding Force Holding Force lbf [N] lbf [NI]
D409BR D409BR
brown brown
approx. approx. 6.6 [29.4] 6.6 [29.4]
D409W D409W
white white
approx. approx. 6.6 [29.4] 6.6 [29.4]
Part Part Number Number
1.85 47.0
.51 13.0 .51[13.0]
1.50 38.0
.16 4.0 .16[4.0]
.79 20.0 .79[2a0]
.89 22.5
4,-
.394 [10.00] .157 4.00 .394 [10.00]xx.157[4.00] (2) OBROUNDS OBROUNDS (2)
plastic housing housing and and cover cover I plastic steelzinc zinc plated plated keeper keeper and and yoke yoke plates I steel plates
.63 16.0 .63[16.0]
.157 4.00 HOLE HOLE WITH WITH 0.157[4.00] .221 [5.60] [5.60] xx 90° 90 C'SINK C'SINK 0 .221 1.14 29.0
.079 2.00 END VIEW
TOP VIEW
Push-off Magnetic Catch Part Part Number Number
D410BR D410BR
Color Color
Holding Force Holding Force lbf [N] lbf [NI]
brown brown
approx. approx. 3.8 [17.0] [17.0] 3.8
.126 3.2 HOLE HOLE WITH WITH 0.126[3.2] .252[6.40] [6.40] xx .071 .071 [1.80] [1.80] C'BORE 0.252 CSORE (2) PLACES PLACES (2)
plastic housing housing and and cover cover I plastic steelbronze bronze plated plated keeper keeper and and yoke yoke plates I steel plates
1.65 42.0 1.65[42.0] 1.34 34.0 1.34[34.0]
1.14 29.0 1.14[29.0]
.16 4.0
h-.16[4.0] 1.77 45.0 1.77[45.o]
2.09 53.0 2.09[53.0]
.252 [6.40] [6.40] x x .126[3.2 .126 3.2 ] OBROUND OBROUND WITH WITH .252 .378 [9.60] [9.60] xx .252 .378 .252 [6.40] [6.40] xx .071 .071 [1.80] [1.80] C'BORE CSO (2) PLACES (2) PLACES .47 12.0 .47[12.0]
.138 3.50 HOLE HOLE WITH WITH 0.138[3.50] .221 [5.60] [5.60] xx 90• 90 C'SINK C'SINK 0.221 1.02 26.0 1.02[26.0] TOP B/WW 1: VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.063 1.60 -1'-.063[1.60] END END VIEW VIEW
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
77
Latches
''TERRA PACIFIC ENGINEERING AND PRODUCTS
Magnetic Catch Catch Magnetic --.
1.97 50.0 1.97[50.0]
.71 18.0 .71[18.0] .63 16.0 .63[16.0]
1.67 42.5 1.67[42.5]
.315 [8.00] .134 3.40 .315 [8.00]xx.134[3.40] (2) OBROUNDS OBROUNDS (2)
.12 3.0 .12[3.0] .47 12.0 .47] 12.0]1
1.38 35.0 1.38[35.0]
Color Color
Holding Force Force Holding lbf [N] lbf [N]
D406 D406
white white
approx. approx. 4.4 [19.6] [19.6] 4.4
plastichousing housingand and cover cover I plastic steelzinc zincplated platedkeeper keeper and and yoke yoke plates plates I steel
.55 14.0 .55[14.0] .157 4.00 HOLE HOLE WITH WITH 0.157[4.00] .256 [6.50] [6.50] xx 90 0 .256 90' C'SINK CSINK (2) PLACES PLACES (2)
Part Part Number Number
1.77 45.0 1.77[45.0]
.063 1.60 .063[1 e0]-4--
TOP VIEW
END VIEW END VIEW
Magnetic Catch Catch Magnetic Part Number Part Number
D404 D404
Holding Force Force lbf Holding lbf [N] [N] approx. 7.7 approx. 7.7 [34.3] [343]
aluminum,mill millfinish finishhousing housingand and cover cover I aluminum, chrome keeper keeper I chrome steel,zinc zinc plated plated yoke yoke plates plates I steel, .67 [17.0] 17.0 .67 1.89 [48.0] 48.0 1.89
.51 [13.0] 13.0 .51
.35 9.0 .35[9.0]
.47 12.0 .47[12.0] .138 3.50 HOLE HOLE WITH WITH 0.138[3.50] .256 [6.50] [6.50] xx 90° 90 C'SINK CSINK 0.256 (2) PLACES PLACES (2)
.160 4.1 0.160[4.1] (2) HOLES HOLES (2) 1.08 [27.5] 27.5 1.08
1.50 [38.0] 38.0 1.50
1 .63 [16.0] 16.0 .63
.150 3.80 HOLE HOLE WITH WITH 0.150[3.80]
9.50 .374 374 [9.50]
.221 [5.60] [5.60] xx 90° 90 C'SINK 0.221 CSINK 1.14 [29.0] 29.0 1.14 TOP VIEW TOP VIEW
.079 [2.00] 2.00 .079
1.50 [38.0] 38.0 1.50
END VIEW VIEW END
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Magnetic Catches Catches Magnetic Part Number Part Number
.97[50.o] .57[4o.o]
1.97 50.0
partno. no. D415-01 D415-01 part .67 17.0 .67[17.o]
.138 3.50 0.138[3.50] (2) HOLES .63 16.0 .63[16.0]
.154 3.90 HOLE HOLE WITH WITH 0.154[3.90] .256 [6.50] [6.50] xx 90 90 • C'SINK 0.256 CSINK (2) PLACES PLACES (2)
approx. 17.6 [78.5] [78.5] approx 17.6
D415 D415
approx. 24.3 [108.1] [108.1] approx 243
.08 2.0 .08[2.0]
.63 16.0 .63[16.0]
1.18 30.0 L.-1.18[30.0] TOP VIEW
part no. D415
D415-01 D415-01
brass, nickel nickel plated I brass, plated housing housing aluminum,mill millfinish finish cover cover I aluminum, steel,nickel nickel plated plated keeper keeper and and yoke yoke I steel, plates plates
.51 13.0 ] .51[13.0
1.57 40.0
4141 11400
Holding Force Force lbf Holding lbf [N] [N]
.063 1.60 .063[ 1.60] END VIEW END VIEW
3.15 80.0 3.15[80.0] 2.76 70.0 2.76[70.0]
.51 13.0 .51[13.0
.67 17.0 .67[17.0]
.138 3.50 0.138[3.50] (2) HOLES HOLES (2)
.08 2.0 .08[2.0] 1.38 35.0 1.38[35.0]
.154 3.90 HOLE HOLE WITH WITH 0.154[3.90] .256 [6.50] [6.50] xx90° 90 C'SINK 0.256 CSINK (2) PLACES (2) PLACES
78 78
Download www.spep.com Download3DmoDELs @ @ www.spep.com
—1— .63 16.0 .63[16.0] 2.17 55.0 2.17[55.0]
.063 1.60 .063] 1.60] 4—
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.57 40.0 .30 7.5
Finish Finish
Holding Force lbf lbf [N] [N] Holding Force
die zinc die cast cast zinc
satin nickel nickel plated satin plated
approx. 12.1 [53.9] [53.9] approx. 12.1
steel, nickel nickel plated I steel, plated magnet magnet and and keeper keeper
TOP VIEW
.79 20.0 1.18 30.0
.10 2.5
.130 3.30 (4) HOLES
.85 21.5 .30 7.5
.79 20.0
.55 14.0
Latches
D418-05 D418-05
Material Material
Magnetic Catch Magnetic Catch
.161 [4.10] x .130 3.30 (4) OBROUNDS
1.18 30.0
Part Part Number Number
Hinges Hinges and and Industrial Industri-1 Hardware Hardware
.59 15.0
.10 2.5 RIGHT SIDE VIEW
FRONT VIEW
1.57 40.0 1--1.57[40.0]-1
,
.47 12.0 .47[12.0]
.30 7.5 30[7.5] } .59 15.0 .59[15.0]
.165 4.20 HOLE HOLEWITH WITH 0.165[4.20] .256[6.50] [6.50] zx 90° 90 CSIN C'SINK 0256 (2) PLACES (2) PLACES
.75 19.0 .75[19.0]
.161 [4.10] x .130 3.30 .161 [4.10]x.190[5.90] (4) OBROUNDS OBROUNDS (4)
1.18 30.0 30.0 ] 1.18[ TOP VIEW
.79 20.0 .79[20.0] 1.18 30.0 1.18[30.0]
.87 22.0 .V[22.0] .10 2.5
.130 3.30 0.130[3.30] (4) (4) HOLES HOLES
.85 21.5 .85[:1.5]
.55 14.0 .55[1i4.0
.079 2.00 .079[ 2.00 ]-4--°—
TOP VIEW
END VIEW ENO VIEW
.79 20.0 79[20C]
.30 7.5 .5] 50[7
.10 2.5 .10[2.5]
FRONT VIEW
RIGHT SIDEVIEW VIEW P1010310E
2.40 61.0 .47 12.0
.30 7.5
.165 4.20 HOLE WITH .256 [6.50] x 90 C'SINK (2) PLACES
Part Part Number Number
D418-03 D418-03
.59 15.0
Magnetic Catch Magnetic Catch
.75 19.0
Material Material
Finish Finish
die zinc die cast cast zinc
TOP VIEW satin nickel nickel plated satin plated
Holding Force lbf lbf [N] [N] Holding Force
.87 22.0
.158 [4.00] x .122 3.10 (4) OBROUNDS
1.97 50.0 TOP VIEW
.079 2.00
END VIEW approx. 28.7 [127.5] approx. 28.7 [127.5]
.79 20.0
1.97 50.0
.130 3.30 (4) HOLES
steel, nickel nickel plated I steel, plated magnet magnet and and keeper keeper .85 21.5
.30 7.5
.10 2.5
.79 20.0
.55 14.0
.10 2.5
FRONT VIEW
RIGHT SIDE VIEW
2.40 61.0 2.40[61.0] .30 7.5 30[7.5]
.165 4.20 HOLE HOLEWITH WITH 0.165[4.20] .256[6.50] [6.50] zx 90° 90 CSINK C'SINK 0.256 (2) (2) PLACES PLACES
} .59 15.0 .59[15.0]
1.06 27.0 27.0 ] 1.66[
.75 19.0 .75[ T] 3.10 .158 [4.00] [4.00] xz .122 .158 .122[3.10] (4) OBROUNDS OBROUNDS (4)
1.97 --.-1.97[ 5050.0 0] TOP VIEW
.079 2.00 .079] 2.00 ]
1.69 43.0 1.69[49.0] — .79[20.0 .79 20.0
50.0 ] 1.97 ....-1.97[ 50.0
.130 3.30 0.130[3.30] (4) (4) HOLES HOLES
.85 21.5
.10 2.5
END ENO VIEW
TOP VIEW
.79 20.0 .79[20.0]
.55 14.0 .55[14.0] t
.30 7.5 30[7.5]
.10 2.5 .10[2.5]i
FRONT VIEW
RIGHT SIDEVIEW VIEW P1010310E
1.06 27.0
.165 4.20 HOLE WITH .256 [6.50] x 90 C'SINK (2) PLACES
4.13 105.0 .75 19.0
Part Part Number Number
D418-01 D418-01
1.69 43.0
Material Material
Finish Finish
die zinc die cast cast zinc
satin nickel nickel plated satin plated
TOP VIEW
.38 9.7
.079 2.00
Holding Force lbf lbf [N] [N] 3.15 80.0 Holding Force END VIEW
approx. 33.1 [147.2] [147.2] approx. 33.1
steel, nickel nickel plated I steel, plated magnet magnet and and keeper keeper
Magnetic Catch Magnetic Catch
.62 15.7
.165 4.20 (8) HOLES
3.74 95.0 TOP VIEW
3.74 95.0 3.15 80.0
.84 21.4 .16 4.0
.85 21.5 .38 9.7
.58 14.7
.79 20.0 .16 4.0 RIGHT SIDE VIEW
FRONT VIEW
4.13 105.0 ] 4.13[105.0 HOLEWITH WITH .165 4.20 HOLE 0.165[4.20] .256[6.50] [6.50] zx 90° 90 CSIN C'SINK 0.256 (2) (2) PLACES PLACES
.38 9.7
ED
.62 15.7 38[9.7] 62[157]
100000 00000
2.17 55.0 2.17[55.0
.75 19.0 .75[19.0] .165 4.20 0.165[4.20] (8) (8) HOLES HOLES
3.15 80.0 3.15[80.0] 3.74 95.0 3.74[95.0]
2.95 75.0 2.95[75.0]
TOPVIEW VIEW Ton
TOP VIEW
3.74 95.0 3.74[95.0] 3.15 80.0 3.15[80.0
.079 2.00 .079] 2.00 ] END VIEW END VIEW
.84 21.4 C4[21.4] .16 4.0
85[21 5] .85 21.5
.79 20.0 04 7] .79[20.0] .58 14.7 .38 9.7 38t9 71 5 t
t
.165 4.20 HOLE WITH
4.0 .16 .16[4.0] RIGHT SIDE VIEW VIEW PlONT WOE
FRONT VIEW
2.17 55.0
.256 [6.50] x 90 C'SINK (2) PLACES .75 19.0
Request Info
1-800-453-1692 www.aboveboardelectronics.com 2.95 75.0 TOP VIEW
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
.079 2.00 END VIEW
79
Latches
SIEP"1 PACIFIC EP -
-ERING AND PRODUCTS
Small T-Latches with Cam Small Three-Point Three-Point Adjustable Adjustable T-Latches with Steel Steel Cam Part Part Number Number
16-1505 16-1505 16-1506 16-1506
441
Grip Range Grip Range
Cam Style Cam Style
.50 [12.7] [12.7] -- 1.00 .50 1.00 [25.4] [25.4]
straight straight
0.00 .50 [12.7] [12.7] 0.00 [0.0] [0.0] --.50
offset in offset in
1.00 [25.4] 1.50 [38.0] [38.0] 1.00 [25.4] --1.50
offset offset out out
Material Material
Finish Finish
die cast die cast zinc zinc
zinc zinc plated plated
includes cam cam and and cam cam jam jam nuts I includes nuts .256 [6.50] 6.50 0.256 (2) HOLES HOLES (2)
GRIPRANGE RANGE -•-• GRIP
PANEL PANEL 90° ROTATION
.88 22.2 MIN. MIN. .88[22.2] .88 22.2 [25.4] MAX. 1.00 [25.41 MAX MIN. 1.00 [25.4] MAX.
1.34 [34.0] 34.0 1.34 2.19 [55.6] 55.6 2.19
1.43 36.2 4-11.43[36.2]
1.06 27.0 1.06 [27.0]
DOOR
DOOR
DOOR
E3 .375 9.53 0.375[9.531
.75 19.1 .75[19.1
1.24 [3 31.4 1.24 .4]
1.06 27.0
FRAME
FRAME
FRAME FRAME DOOR COO
.125 3.18 0.125[3.18] (2) PLACES
CCW OPERATION OPERATION CW OPERATION OPERATION .375 9.53 CW CCW .75 19.1DIMENSIONS MOUNTING MOUNTINGDIMENSIONS DIMENSIONS MOUNTING DIMENSIONS MOUNTING
Medium Adjustable T-Latches T-Latches with Cam Medium Three-Point Three-Point Adjustable with Steel Steel Cam
CCW OPERATION MOUNTING DIMENSIONS
CW OPERATION MOUNTING DIMENSIONS
Part Part Number Number
16-2005 16-2005 16-2006 16-2006
Grip Range Grip Range
Cam Style Cam Style
.56 [14.3] - 1.28 [32.5] [32.5] .56 [143] -1.28
straight straight
.06 [1.6] [1.6] -.78 .06 -.78 [19.8] [19.8]
offset in offset in
1.06 [27.0] [27.0] -- 1.78 1.06 1.78 [45.2] [45.2]
offset offset out out
.125 3.18 (2) PLACES
Material Material
Finish Finish
die cast die cast zinc zinc
zinc zinc plated plated
includes cam cam and and cam cam jam jam nuts I includes nuts PANEL PANEL
.256 [6.50] 6.50 0.256 (2) HOLES (2) HOLES
GRIP RANGE RANGE GRIP
FRAME DOOR
90° ROTATION
1111141 3.00 [76.2] 76.2 3.00
.375 [9.53] 9.53 0.375
1.34 34.0 1.34 [34.o]
1
1.49 37.9
1.75 44.6 1.75 [44.6]
1.25 31.8 1.25[31.8]
Lip
1
.125 [3.18] 3.18 0.125 (2) PLACES PLACES (2)
1.00 25.4 1.00[25.4 1.83 46.5 1.83[48.5]
1.38 35.0 1.38[35.0]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Medium Single-PointAdjustable AdjustableT-Latches T-Latcheswith withDie DieCast CastZinc Zinc Cam Cam Medium Single-Point Part Handle PartNumber Number Handle
.24 6.2 024[62]
16-25 16-25
cast cast
16-50 16-50
wire wire
Grip Range Grip Range
2.86 72.7 2.86[72.7]
wire handle wire handle option option
16-25
2.19 55.6 -.-2.19[55.6]
Cam Style Material Finish Finish Cam Style Material
.13 [3.2] --1.00 .13 [3.2] 1.00 [25.4] [25.4]
offset in offset in
1.00 [25.4] [25.4] -- 2.00 1.00 2.00 [50.8] [50.8]
offset out offset out
.13 [3.2] 1.00 [25.4] [25.4] .13 [3.2] --1.00
offset in offset in
1.00 [25.4] [25.4] -- 2.00 1.00 2.00 [50.8] [50.8]
offset out offset out
die die cast cast zinc zinc
zinc zinc plated plated
die die cast cast zinc zinc
zinc zinc plated plated
includes cam cam and and cam cam set set screw screw I includes .125 3.18 x.05 x .05 0.3] [1.3]HIGH HIGH 0.125[3.18] (2) (2) STUDS STUDS
GRIP GRIP RANGE RANGE
PANEL PANEL
FRAME
90° ROTATION
DOOR
1.75 44.5 1.75 [44.5]
16-50
.375 9.53 0.375[9.53
1.25 31.8 1.25[31.8]
3.00 [76.2] 76.2 3.00
.125 3.18 0.125[3.18] (2) PLACES
1.00 25.4 1.00[2E4
1.00 [25.4] 25.4 1.00
ll 1.75 44.6 1.75 [44.6]
1.49 37.9
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
1.83 46.5 1.83 [46.5]
Large T-Latches with Cam Large Three-Point Three-Point Adjustable Adjustable T-Latches with Steel Steel Cam Part Part Number Number
16-3005 16-3005 16-3006 16-3006
Grip Range Grip Range
Cam Style Cam Style
.25 [6.4] 1.50 [38.0] [38.0] .25 [6.4] --1.50
straight straight
0.00 .75 [19.0] [19.0] 0.00 [0.0] [0.0] --.75
offset in in offset
1.00 [25.4] [25.4] -- 2.25 1.00 2.25 [57.0] [57.0]
offset out offset out
Material Material
Finish Finish
die die cast cast zinc zinc
zinc zinc plated plated
includes: cam, cam, cam cam jam screws I includes: jam nuts, nuts, and and mounting mounting screws PANEL PANEL
.256 6.50 0.256[6.50] (2) (2) HOLES HOLES
GRIPRANGE RANGE -4- GRIP
FRAME
FRAME
DOOR
DOOR
1.88 47.8 1.88[47.8] 4.25 108.0 4.25[ 08.0]
• 1 1=
1.63 41.3 1.63[41.3]
1.63 41.3 142[4121
I 2.12 53.8
80
Download 3Dmour @@www.spep.com Download www.spep.com
2.36 60.0 2.01 51.0 2.36[60.0] 2.01[51.0]
.500 12.70 0.8031
1.38 [34.9] MIN. 1.63 41.3 MAX.
CW OPERATION DIMEME11011 MOUNTING DIMENSIONS NOIMMIODMINIEMNE
.203[6 5.16 0478 .. (2))PUCES PLACES CCW OPERATION CCWOMILVIION
DIMENSIONS •MOUNTING 101.111TMOORIERSOIS
1.75 44.4 1.75[44.4]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges and Industrial industrial bfrrdWare
A
GRIP GRIP
1.42 36.0 1.42 [36.0] FRAME
.886 22.50 0.886 6 [22.50]
90°
ROTATION ROTATION
1.77 45.0
DOOR
Latches
Low Profile Latches Low Profile Quarter-turn Quarter-turn Latches OVERALL LENGTH OVERALL LENGTH
31.0 0 1.22 1 22 [31 0] INDICATOR INDICATOR
FRONT VIEW VIEW FRONT
Part Number Part Number
.791 20.10 .791[20.10] SQUARE SQUARE
BODY LENGTH LENGTH BODY
A A
MOUNTING DIMENSIONS MOUNT NG D MENSIONS .24 [[ 6.0 ] MAX. THICKNESS THICKNESS .24 6.0]MAX.
RIGHT SIDE SIDE VIEW VIEW RIGHT
Description Description
Body Body Length Length
Overall Overall Length Length
Keys Keys
slotted slotted
.63 [16.0] .63 [16.0]
.93 [23.7] .93 [23.7]
no key key no
textured chrome textured chrome
slotted slotted
.63 [16.0] .63 [16.0]
.93 [23.7] .93 [23.7]
no key key no
matte black powder matte black powder coated coated
8MM square 8MM square
.63 [16.0] .63 [16.0]
.93 [23.7] .93 [23.7]
4-19K01 4-19K01
textured chrome textured chrome
8MM square 8MM square
.63 [16.0] .63 [16.0]
.93 [23.7] .93 [23.7]
4-19K01 4-19K01
matte black powder matte black powder coated coated
7MM triangle triangle 7MM
.63 [16.0] .63 [16.0]
.93 [23.7] .93 [23.7]
30K 30K
textured chrome textured chrome
7MM triangle triangle 7MM
.63 [16.0] .63 [16.0]
.93 [23.7] .93 [23.7]
30K 30K
matte black powder matte black powder coated coated
slotted slotted
.94 [24.0] .94 [24.0]
1.25 1.25 [31.7] [31.7]
no key key no
textured chrome textured chrome
slotted slotted
.94 [24.0] .94 [24.0]
1.25 1.25 [31.7] [31.7]
no key key no
matte black powder matte black powder coated coated
8MM square 8MM square
.94 [24.0] .94 [24.0]
1.25 1.25 [31.7] [31.7]
4-19K01 4-19K01
textured chrome textured chrome
8MM square 8MM square
.94 [24.0] .94 [24.0]
1.25 1.25 [31.7] [31.7]
4-19K01 4-19K01
matte black powder matte black powder coated coated
7MM triangle triangle 7MM
.94 [24.0] .94 [24.0]
1.25 1.25 [31.7] [31.7]
30K 30K
7MM triangle triangle 7MM
.94 [24.0] .94 [24.0]
1.25 1.25 [31.7] [31.7]
30K 30K
Material Material
Finish Finish
Plug Style Plug Style
41-60BK 41-60BK
die cast cast zinc die zinc
matte black powder matte black powder coated coated
41-60TC 41-60TC
die cast cast zinc die zinc
41-61BK 41-61BK
die cast cast zinc die zinc
41-61TC 41-61TC
die cast cast zinc die zinc
41-62BK 41-62BK
die cast cast zinc die zinc
41-62TC 41-62TC
die cast cast zinc die zinc
41-70BK 41-70BK
die cast cast zinc die zinc
41-70TC 41-70TC
die cast cast zinc die zinc
41-71BK 41-71BK
die cast cast zinc die zinc
41-71TC 41-71TC
die cast cast zinc die zinc
41-72BK 41-72BK
die cast cast zinc die zinc
41-72TC 41-72TC
die cast cast zinc die zinc
textured chrome textured chrome
includes: I includes: body nut nut I body I cam camretaining retaining screw screw washer ►detent detent washer facegasket gasket I face internal O-ring I internal 0-ring
camssold sold separately separately (see (see below) I cams below) keyssold sold separately separately I keys intendedfor forNEMA NEMAtype type44&&12 12enclosures enclosures I intended
One Point Point Cams Cams One Part Part Number Number
12C100 12C100
Grip Grip Short Short Body Length Body Length
Long Long Body Length Body Length
Offset In Offset In
---
.24 [6.0] [6.0] .24
.71 [18.0] [18.0] in .71 in
Part Part Number Number
Grip Grip Short Short Body Body Length Length
Long Long Body Body Length Length
Offset Out Offset Out
12C110 12C110
.71 [18.0] .71 [18.0]
1.02 1.02 [26.0] [26.0]
.08 [2.0] .08 [2.0] out out
12C101 12C101
---
.31 [8.0] [8.0] .31
.63 [16.0] [16.0] in .63 in
12C111 12C111
.79 [20.0] .79 [20.0]
1.10 1.10 [28.0] [28.0]
.16 [4.0] .16 [4.0] out out
12C102 12C102
.08 [2.0] [2.0] .08
.39 [10.0] .39 [10.0]
.55 [14.0] [14.0] in .55 in
12C112 12C112
.87 [22.0] .87 [22.0]
1.18 1.18 [30.0] [30.0]
.24 [6.0] .24 [6.0] out out
12C103 12C103
.16 [4.0] [4.0] .16
.14 [12.0] .14 [12.0]
.47 [12.0] [12.0] in .47 in
12C113 12C113
.94 [24.0] .94 [24.0]
1.25 1.25 [32.0] [32.0]
.31 [[8.0] [[8.0] out .31 out
12C104 12C104
.24 [6.0] [6.0] .24
.55 [14.0] .55 [14.0]
.39 [10.0] in in 39 [10.0]
12C114 12C114
1.02 1.02 [26.0] [26.0]
1.34 [34.0] 134 [34.0]
.39 [10.0] out 39 [10.0] out
12C105 12C105
.31 [8.0] [8.0] .31
.63 [16.0] .63 [16.0]
.31 [8.0] in in 31 [8.0]
12C115 12C115
1.10 1.10 [28.0] [28.0]
1.42 1.42 [36.0] [36.0]
.47 [12.0] .47 [12.0] out out
12C106 12C106
.39 [10.0] 39 [10.0]
.71 [18.0] .71 [18.0]
.24 [6.0] [6.0] in .24 in
12C116 12C116
1.18 1.18 [30.0] [30.0]
1.50 1.50 [38.0] [38.0]
.55 [14.0] .55 [14.0] out out
12C107 12C107
.47 [12.0] .47 [12.0]
.79 [20.0] .79 [20.0]
.16 [4.0] [4.0] in .16 in
12C117 12C117
1.25 1.25 [32.0] [32.0]
1.57 1.57 [40.0] [40.0]
.63 [16] .63 [16] out out
12C108 12C108
.55 [14.0] .55 [14.0]
.87 [22.0] .87 [22.0]
.08 [2.0] [2.0] in .08 in
12C118 12C118
1.34 [34.0] 134 [34.0]
1.65 1.65 [42.0] [42.0]
.71 [18.0] .71 [18.0] out out
12C109 12C109
.63 [16.0] .63 [16.0]
.94 [24.0] .94 [24.0]
.00 [0.0] .00 [0.0]
12C119 12C119
1.42 1.42 [36.0] [36.0]
1.73 1.73 [44.0] [44.0]
.79 [20.0] .79 [20.0] out out
steel, zinc zinc plated plated I steel,
steel, zinc zinc plated plated I steel,
GRIP r- GRIP
OFFSET OFFSET STRAIGHT OFFSET OFFSET STRAIGHT IN OUT IN OUT CAM CAM
.67 [17.0] 17.0 .67
1.77 45.0
.35 9.0
BODY LENGTH BODY LENGTH
.31 8.0 FRONT N T VIEW
GRIP & & BODY BODY LENGTH GRIP LENGTH Request Info
.118 3.00 .118 [3.00]
1-800-453-1692 www.aboveboardelectronics.com
-
SIDE RIGHT RIGHT VIEW SIDE VIEW
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
81 81
Latches
SIERRA PACH—qC ENGINEERING AND PRODUCTS
Quarter-turn Latches Latches Quarter-turn
NEMA NEMA NEMA
4 12 Features Features GRIP H GRIP
cam rotates rotates 90° 90° I cam cam locators locators designed designed into into inserts I cam inserts I intended intendedfor forNEMA NEMA type type 4, 4, 4X, 4X, 12 12 and and IP66 IP66 enclosure enclosure requirements requirements assembly includes: includes: I assembly body nut nut I body cam retaining retaining screw screw I cam disc washer washer I disc & face ►UL ULrated rated seals seals (o-ring (o-ring & face gasket) gasket) camssold soldseparately. separately.See Seepg. pg.95 95for for cams cams & & grip I cams grip dimension dimension
.785 F19.941 19.94 .785 .775 [19.69 19.69 .775 .785 19.94 .775 19.69
22.73 d, .895 .895 F22.73]
22.23 "' .875 .875 [22.23 .895 22.73 .875 22.23
1.13 1.13[ 28.6 28.6 ]
II111 II I
A
MOUNTING DIMENSIONS DIMENSIONS MOUNTING CUT-OUT
.69 17.5 .69[ 17.5 ]
Slotted Plug Plug Quarter-turn Quarter-turn Latches Slotted Latches Material Material
Part Part Number Number
patented
Finish Finish
Housing Housing
Slotted Plug Plug Slotted
Housing Housing
Slotted Plug Plug Slotted
41-00 41-00
die zinc die cast cast zinc
die cast zinc die cast zinc
chrome chrome plated plated
chrome chrome plated plated
41-00BK 41 -00BK
die zinc die cast cast zinc
die cast zinc die cast zinc
matte black painted matte black painted
matte black painted matte black painted
41-00SS 41-0055
304SS 304SS
304SS 304SS
machine machine polished polished
machine machine polished polished
41BK-00 41 BK-00
die zinc die cast cast zinc
die cast zinc die cast zinc
matte black painted matte black painted
chrome chrome plated plated
41-00P 41 -00P
thermoplastic thermoplastic
thermoplastic* thermoplastic*
black black textured textured
black black textured textured
41P-00SS 41P-0055
thermoplastic thermoplastic
304SS 304SS
black black textured textured
machine machine polished polished
41-00SST 41 -0055T
316SS 316SS
316SS 316SS
passivated passivated
passivated passivated
* thermoplastic thermoplasticplug plugisis glass glass reinforced reinforced I* partswith withthermoplastic thermoplasticmaterials materialshave haveUV UV stabilizers stabilizers I parts
8mm Recessed Hex Hex Plug Plug Quarter-turn Quarter-turn Latches 8mm Recessed Latches Material Material
Part Part Number Number
Finish Finish
Housing Housing
Hex Plug Hex Plug
Housing Housing
Hex Hex Plug Plug
41-02 41-02
die zinc die cast cast zinc
die cast zinc die cast zinc
chrome chrome plated plated
chrome chrome plated plated
41-02BK 41 -02 B K
die zinc die cast cast zinc
die cast zinc die cast zinc
matte black painted matte black painted
matte black painted matte black painted
hextool tool key key sold sold separately 392-K pg. 31 I hex separately as as part part no. no. 392-K pg. 31
10mm 1 OmmRecessed Recessed Hex Hex Plug Plug Quarter-turn Quarter-turn Latches Latches Material Material
Part Part Number Number
Finish Finish
Housing Housing
Hex Plug Hex Plug
41-03 41-03
die zinc die cast cast zinc
die cast zinc die cast zinc
chrome chrome plated plated
chrome chrome plated plated
41-03BK 41 -03 BK
die zinc die cast cast zinc
die cast zinc die cast zinc
matte black painted matte black painted
matte black painted matte black painted
die zinc die cast cast zinc
die cast zinc die cast zinc
matte black painted matte black painted
chrome chrome plated plated
thermoplastic thermoplastic
die cast zinc die cast zinc
black black textured textured
chrome chrome plated plated
41BK-03 41 BK-03 41P-03 41P-03
Housing Housing
Hex Hex Plug Plug
partswith withthermoplastic thermoplasticmaterials materialshave haveUV UV stabilizers stabilizers I parts
El
Material Material
Part Part Number Number
Bellcore Hex Bellcore Hex Plug Plug
41-04 41-04
die zinc die cast cast zinc
die cast zinc die cast zinc
chrome chrome plated plated
chrome chrome plated plated
41-04BK 41 -04BK
die zinc die cast cast zinc
die cast zinc die cast zinc
matte black painted matte black painted
matte black painted matte black painted
304SS 304SS
304SS 304SS
machine machine polished polished
machine machine polished polished
thermoplastic thermoplastic
304SS 304SS
black black textured textured
machine machine polished polished
41P-04SS 41P-0455
activated with with aa 7/16" socket I activated 7/1e socket partswith withthermoplastic thermoplasticmaterials materialshave haveUV UV stabilizers stabilizers I parts
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Finish Finish
Housing Housing
41-04SS 41-0455
82 82
Hex Hex Plug Plug Quarter-turn Quarter-turn Latches Latches Housing Housing
Bellcore Hex Bellcore Hex Plug Plug
Hinges Hinges and and Industrial Industrial Hardware Hardware
Part Part Number Number
Pp
Material Material
DI
Finish Finish
Housing Housing
Square Plug Square Plug
Housing Housing
Square Square Plug Plug
41-07 41-07
die zinc die cast cast zinc
die zinc die cast cast zinc
chrome plated chrome plated
chrome chrome plated plated
41-07BK 41-07BK
die zinc die cast cast zinc
die zinc die cast cast zinc
matte black painted matte black painted
matte black painted matte black painted
41BK-07 41BK-07
die zinc die cast cast zinc
die zinc die cast cast zinc
matte black painted matte black painted
chrome chrome plated plated
thermoplastic thermoplastic
die zinc die cast cast zinc
black black textured textured
chrome chrome plated plated
41P-07 41P-07
Latches
8mm Square Plug Plug Quarter-turn Quarter-turn Latches 8mm Square Latches
n
thermoplasticplug plugisis glass glass reinforced reinforced I thermoplastic partswith withthermoplastic thermoplasticmaterials materialshave haveUV UV stabilizers stabilizers I parts
Key-Locking Key-Locking Quarter-turn Quarter-turn Latches Latches Part Part Number Number 41-10 41-10
Material Material
Finish Finish
Key Key Code Code
die zinc die cast cast zinc
chrome chrome
CH751 CH751
ASP 41-1013 41-1013
die zinc die cast cast zinc
chrome chrome
1333 1333
41-10BK 41-10BK
die zinc die cast cast zinc
black black
CH751 CH751
die zinc die cast cast zinc
black black
1333 1333
ale 41-1013BK 41-1013BK
180° rotation available I 1800 rotation available 304SS scalp ►304SS scalp with withdust dust shutter shutter
Quarter-turn Thumb Quarter-turn Thumb Latches Latches Part Part Number Number
Material Material
Finish Finish
Housing Housing
Thumb-turn Plug Thumb-turn Plug
Housing Housing
Thumb-turn Plug Thumb-turn Plug
41-05 41-05
die zinc die cast cast zinc
die zinc die cast cast zinc
chrome plated chrome plated
chrome chrome plated plated
41-05BK 41-05BK
die zinc die cast cast zinc
die zinc die cast cast zinc
matte black painted matte black painted
matte black painted matte black painted
Quarter-turn Thumb Quarter-turn Thumb Latches Latches Part Part Number Number
Material Material
Finish Finish
Housing Housing
Thumb-turn Plug Thumb-turn Plug
Housing Housing
Thumb-turn Plug Thumb-turn Plug
die zinc die cast cast zinc
plastic plastic
matte black painted matte black painted
black black
41-08SS 41-0855
304SS 304SS
plastic plastic
machine machine polished polished
black black
41-08P 41-08P
die zinc die cast cast zinc
plastic plastic
chrome plated chrome plated
black black
41P-08 41P-08
thermoplastic thermoplastic
plastic plastic
black black textured textured
black black
41-08BK 41-08BK
thermoplasticplug plugisis glass glass reinforced reinforced I thermoplastic partswith withthermoplastic thermoplasticmaterials materialshave haveUV UV stabilizers stabilizers I parts
Padlocking Quarter-turn Thumb Thumb Latch Latch Padlocking Quarter-turn Part Part Number Number
41-09BK 41-09BK
Material Material
Finish Finish
Housing Housing
Thumb-turn Plug Thumb-turn Plug
Housing Housing
Thumb-turn Plug Thumb-turn Plug
die zinc die cast cast zinc
die zinc die cast cast zinc
matte black painted matte black painted
black black
acceptspadlock padlockwith with shackle shackle of of up I accepts up to to 3/8" 3/8" diameter diameter
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
83 83
Latches
SIERRA PACIFIC ENGINEERING AND PRODL""
Quarter-turn Thumb Quarter-turn Thumb Latches Latches
EW FROT GT A M I LY
Housing Housing
Part Part Number Number
Thumb-turn Plug Plug Thumb-turn
Material Material
Key Key Code Code
Finish Finish
Material Material
die zinc die cast cast zinc
bright bright chrome chrome
die zinc die cast cast zinc
bright bright chrome chrome
non-locking non-locking
41-30BK 41-30BK
die zinc die cast cast zinc
textured black black textured powder powder coated coated
die zinc die cast cast zinc
textured black black textured powder powder coated coated
non-locking non-locking
41-30LK 41-30LK
die zinc die cast cast zinc
bright bright chrome chrome
die zinc die cast cast zinc
bright bright chrome chrome
333 333
41-30BKLK 41-30BKLK
die zinc die cast cast zinc
textured black black textured powder powder coated coated
die zinc die cast cast zinc
textured black black textured powder powder coated coated
333 333
41-30 41-30
assembly includes: ►assembly includes: body body nut, nut, cam cam retaining retaining screw, internal (2) ringed screw, internal O-ring, 0-ring, face face gasket, gasket, and and (2) ringed keys keys for for locking locking latch latch 32.0 26[32 0] 011.26
Finish Finish
sold separately. separately. See See pg. pg. 95 95 for for cams cams & & ►cams cams sold grip dimension grip dimension
.81 20.6 81 [20.6]
18.0 .71 [18.0] .886 22.50
.787 20.00
50.0 1.97 [50.0]
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Quarter-turn Thumb Quarter-turn Thumb Latches Latches
NEMA
12
IP65
RATED
Housing Housing
Thumb-turn Plug Plug Thumb-turn
Part Part Number Number
Material Material
Finish Finish
Material Material
Finish Finish
41-19BK 41-19BK
die zinc die cast cast zinc
black black powder powder coat coat
die cast cast zinc zinc die
black black powder powder coat coat
41-19CH 41-19CH
die zinc die cast cast zinc
chrome chrome plated plated
die cast cast zinc zinc die
chrome chrome plated plated
assembly includes: ►assembly includes: body body nut, nut, cam cam retaining retaining screw, internal screw, internal compression compression spring, spring, internal internal O-ring and face face gasket 0-ring and gasket 1.26 32.0 1.10 [28. 28.0 01.10 0]
sold separately. separately. See See pg. pg. 95 95 for for cams cams & & ►cams cams sold grip dimension grip dimension .81 20.6
.71 18.0
.71 18.0 .71 [18.0]
.886 22.50
.71 18.0
.886 22.50
.787 .78720.00 20.00
1.97 50.0
37.0 1.46 [37.0] 1.46
CUT-OUT MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Tubular Quarter-turn Latch Tubular Quarter-turn Latch
NEMA
12 Part Number Part Number
dis
41-18BK 41-18BK
Description Description
Material Material
Finish Finish
Key Part Key Part No. No.
tubular tubular
die zinc die cast cast zinc
matte black powder matte black powder coated coated
3-13K 3-13K
includes: body nut, cam cam retaining retaining screw, screw, and and seals: seals: (1) ►assembly assembly includes: body nut, (1) internal internal o-ring o-ring and and aa face face gasket gasket plug for for higher ►tubular tubular plug higher security security sold separately. separately. See See pg. pg. 95 95 for for cams cams & & grip ►cams cams sold grip dimension dimension t GRIP GRIP 1.26 32.0
.81 20.6
.71 18.0
18.0 .71 [18.0]
.886 22.50
1.13 28.6
.886 22.50
I .787 20.00
1.97 50.0
Er
.787 20.00 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Coin-proof Slotted SlottedQuarter-turn Quarter-turn Latch Latch Coin-proof
NEMA
12
IP65
RATED
Part Number Part Number
41-01BK 41-01BK
Description Description
Material Material
Finish Finish
Key Part Key Part No. No.
coin-proof coin-proof slot slot
die zinc die cast cast zinc
textured black textured black
no no key key
includes: body nut, cam cam retaining retaining screw, screw, and and seals: seals: (1) ►assembly assembly includes: body nut, (1) internal internal o-ring o-ring and and aa face face gasket gasket plug for for higher ►coin-proof coin-proof slotted slotted plug higher security security sold separately. separately. See See pg. pg. 95 95 for for cams cams & & grip ►cams cams sold grip dimension dimension GRIP 1.26 32.0
.81 20.6
.71 18.0
.886 22.50
18.0 .71 [18.0] .08 [2.0] 2.0 .08
.886 22.5
1.97 50.0
1
1.10 28.0 01.10[28.0]
■
84 84
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
E
.787 20.00
.787 20.00 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Hinges and Hardware Hinges and Industrial Industrial bfrrdWare NEMA
4
12
/P65
RATED
Quarter-turn Quarter-turn Latches Latches
Features Features GRIP
intendedfor forNEMA NEMA type & 12 I intended type 44 & 12 enclosures enclosures camssold soldseparately. separately.See Seepg. pg.95 95for for cams cams & & grip I cams grip dimension dimension ►** keys keys sold sold separately. separately. See See table table for for key keypart part numbers numbers assembly includes: includes: I assembly body nut nut I body cam retaining retaining screw screw I cam disc washer washer I disc face gasket gasket I face internal o-ring o-ring I internal
22.73 „s .895 .895 F22.731 .875L22.23,1 22.23 .875 .895 22.73 .875 22.23
.785 19.94] 19.94 .785 .775LL19.69 19.69 .775
Latches
NEMA
.785 19.94 .775 19.69 1.08[27.5] 27.5 01.08
1
latcheson onthis thispage pagemay mayuse usethe thePlastic Plastic Cover Cover (part KH55) I latches (part no no KH55) on pg. pg. 87 87 on
CUT-OUT MOUNTING DIMENSIONS MOUNTING DIMENSIONS
LENGTH LENGTH
Quarter-turn Latches Quarter-turn Latches with with Slotted Slotted Plugs Plugs Part Part Number Number
Length Length
Material Material Housing Housing
Finish Finish Plug Plug
Housing Housing
Plug Plug
Key ** Key Part No. Part No.
12 12
.709 .709 [18.00] [18.00]
die diecast cast zinc zinc die cast castzinc zinc die
chrome chrome plated plated
chrome chrome plated plated
no no key key
12BK 12BK
.709 .709 [18.00] [18.00]
die diecast cast zinc zinc die cast castzinc zinc die
black black e-coat e-coat
black black e-coat e-coat
no no key key
12PBK alp 12PBK
.709 .709 [18.00] [18.00]
plastic plastic
die zinc die cast cast zinc
black black
chrome chrome
no no key key
12SS dm 1255
.709 .709 [18.00] [18.00]
304SS 304SS
304SS 304SS
machine machine polished polished
machine machine polished polished
no no key key
12SST OOP 1255T
.709 .709 [18.00] [18.00]
316SS 316SS
316SS 316SS
machine machine polished polished
machine machine polished polished
no no key key
12SST-50* ow) 1255T-50*
.709 .709 [18.00] [18.00]
316SS 316SS
316SS 316SS
machine machine polished polished
machine machine polished polished
no no key key
12SST-50 has spring instead instead of of disc disc washer ►** part part no. no.1255T-50 has compression compression spring washer
Quarter-turn Latches Quarter-turn Latches with with Square Square Plugs Plugs Part Part Number Number
Square FaceWith With Square Face Plug Size Arrow Plug Size Arrow
Key ** Key Part No. Part No.
Length Length
Material Material
Finish Finish
.689 .689 [17.50] [17.50]
die zinc die cast cast zinc
chrome plated chrome plated
7mm 7mm
no no
4-19K01 4-19K01
.709 .709 [18.00] [18.00]
die zinc die cast cast zinc
chrome plated chrome plated
7mm 7mm
no no
4-19K01 4-19K01
.709 .709 [18.00] [18.00]
die zinc die cast cast zinc
black, black, smooth smooth
7mm 7mm
no no
4-19K01 4-19K01
14-01 14-01
.709 .709 [18.00] [18.00]
die zinc die cast cast zinc
chrome plated chrome plated
8mm 8mm
yes yes
4-19K 4-19K
14BK-01 14BK-01
.709 .709 [18.00] [18.00]
die zinc die cast cast zinc
black black
8mm 8mm
yes yes
4-19K 4-19K
14 14 14-50* j 14-50* 409 14BK-50* 14BK-50*
7mm no no arrow arrow
14-50 & & 14BK-50 spring instead instead of of disc disc washer ►** part part numbers numbers 14-50 14BK-50 have have compression compression spring washer
8mm 8mm with arrow arrow with
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
85 85
Latches
SIERRA PACH—qC ENGINEERING AND PRODUCTS
Quarter-turn Latches Latches Quarter-turn
NEMA
NEMA
4
12
IP65
RATED
Features Features intendedfor forNEMA NEMA type & 12 I intended type 44 & 12 enclosures enclosures camssold soldseparately. separately.See Seepg. pg.95 95for for cams cams & & grip I cams grip dimension dimension ►** keys keys sold sold separately. separately. See See table table for for key keypart part numbers numbers assembly includes: includes: I assembly body nut nut I body cam retaining retaining screw screw I cam disc washer washer I disc face gasket gasket I face internal o-ring o-ring I internal
GRIP GRIP —
co
22.73 „s .895 .895 F22.731 .875 L22.23 22.23 .875 .895 22.73 .875 22.23
.785 19.94 .785[19.94] .775 L19.69 19.69 .775 .785 19.94 .775 19.69 27.5 c5 11.08 .08[27 .5]
MOUNTING DIMENSIONS MOUNTING DIMENSIONS CUT-OUT
latcheson onthis this page, page, with with the the exception exception of of part I latches part no. no. 19, 19, may may use use the the Plastic Plastic Cover Cover (part (part no no KH55) KH55) on on pg. pg. 87 87
LENGTH LENGTH
Double Bit Quarter-turn Quarter-turn Latch Latch Double Bit Length Length
Material Material
Finish Finish
Plug Plug Size Size
** Key Key Part Part No. No.
.689 .689 [17.50] [17.50]
die die cast cast zinc zinc
chrome chrome plated plated
3mm 3mm
4-14K 4-14K
18BK K alp 18B
.709 .709 [18.00] [18.00]
die die cast cast zinc zinc
black, black, textured textured
3mm 3mm
4-14K 4-14K
18-01 41918-01
.709 .709 [18.00] [18.00]
die die cast cast zinc zinc
chrome chrome plated plated
5mm 5mm
4-14K 4-14K
18BK-01 aim) 18BK-01
.709 .709 [18.00] [18.00]
die die cast cast zinc zinc
black, black, textured textured
5mm 5mm
4-14K 4-14K
Part Part Number Number
18 18
Double Bit Quarter-turn Double Bit Quarter-turn Latches Latches with with Compression Compression Spring Spring Length Length
Material Material
Finish Finish
Plug Plug Size Size
** Key Key Part Part No. No.
gum- 18-50 18-50
.709 .709 [18.00] [18.00]
die die cast cast zinc zinc
chrome chrome plated plated
5mm 5mm
4-14K 4-14K
18BK-50 ag9 18BK-50
.709 .709 [18.00] [18.00]
die die cast cast zinc zinc
black, black, smooth smooth
5mm 5mm
4-14K 4-14K
Part Part Number Number
usescompression compressionspring spring instead insteadof of disc disc washer washer I uses
Triangular Quarter-turn Triangular Quarter-turn Latches Latches Part Part No. No.
Length Length
Material Material
Finish Finish
Plug Plug Size Size
** Key Key Part Part No. No.
.689 .689 [17.50] [17.50]
die die cast cast zinc zinc
chrome plated chrome plated
7mm 7mm
4-15K 4-15K
30-01 409 30-01
.709 .709 [18.00] [18.00]
die die cast cast zinc zinc
chrome plated chrome plated
8mm 8mm
4-15K01 4-15K01
30BK-01 dam 30BK-01
.709 .709 [18.00] [18.00]
die die cast cast zinc zinc
textured black black textured
8mm 8mm
4-15K01 4-15K01
30 30
Quarter-turn Thumb Latch Latch Quarter-turn Thumb Part Part Number Number
19 19
Request Info
86 86
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Length Length
Material Material
Finish Finish
** Key Key Part Part No. No.
.689 .689 [17.50] [17.50]
ABS plastic ABS plastic
black black
no no key key
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges and Industrial industrial Hf-rdware
Part Part Number Number
Material Material
Finish Finish
Plug Style Plug Style
12
Small Small Quarter-turn Quarter-turn Latches Latches
/P65
RATE.
Description Description
40-00 40-00
die zinc die cast cast zinc
chrome chrome plated plated
slotted slotted
40-00BK 40-00BK
die zinc die cast cast zinc
black black powder powder coated coated
slotted slotted
40-01 40-01
die zinc die cast cast zinc
chrome chrome plated plated
40-01BK 40-01BK
die zinc die cast cast zinc
black black powder powder coated coated
40-02 40-02
die zinc die cast cast zinc
chrome chrome plated plated
40-02BK 40-02BK
die zinc die cast cast zinc
black black powder powder coated coated
40-03 40-03
die zinc die cast cast zinc
chrome chrome plated plated
thumb turn turn thumb
40-03BK 40-03BK
die zinc die cast cast zinc
black black powder powder coated coated
thumb turn turn thumb
camssold sold separately, separately, see I cams see table table below below assembly includes: includes: I assembly body mounting mounting nut I body nut cam retaining retaining screw screw I cam face gasket gasket I face internal 0-ring O-ring I internal disc washer washer I disc
NEMA
1)4')
Latches
EW FP T AMILY
6mm square 6mm square 6mm square 6mm square
O
7mm 7mm triangular triangular 7mm 7mm triangular triangular
O
GRIP GRIP
+.01 +.2 .55 - .00 14.0 - .1
.79 [20.0] 20.0 0.79 +.008 .630 - .000 0.63e_088
+.20 + 20 16.00 16.00 .00 :00
.53 [13.5] 13.5 .53
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Cams Cams Part Numbers Part Numbers
40C10 40C10
Grip Grip
Cam Style Cam Style
Material Material
Finish Finish
.53 [13.5] [13.5] .53
straight straight
steel steel
zinc plated zinc plated
40C05 40005
.30 [7.5] [7.5] .30
offset in in offset
steel steel
zinc plated zinc plated
40C15 40C15
.77 [19.5] [19.5] .77
offset out offset out
steel steel
zinc plated zinc plated
OFFSET IN
.47 12.0
STRAIGHT CAM
OFFSET OUT
.94 24.0
Plastic Cover for Latch Plastic Cover for Quarter-turn Quarter-turn Latch Part Number Part Number
KH55 KH55
Material Material
Finish Finish
thermoplastic thermoplastic
Grey Grey
protectslatch latch from from water water and I protects and dust dust may be be used used on on latches latches on on pages pages 82-85 82-85 and I may and 121-122 that 121-122 that are are not not thumb-turn thumb-turn latches latches
3.60 91.5 3.80[91.5]
A
1.334 33.87 01.334[33.87]
A
T
.79 20.0 .79[20.0] SQ.. So
1.08 27.4 —.101.08[27.4 .07 1.8 .07[1.8]1 .35 9.00] 35[9 SECTION A-A SECTION A-A
Black Black Finger Finger Pull Pull Part Part Number Number
KH38BK KH38BK
Material Material
Finish Finish
thermoplastic with with thermoplastic UV UVstabilizers stabilizers
1.25 31.8
.76 19.2
A
.10 2.4
textured textured 1.78 45.2
will shorten shorten cam cam grip grip by by .10" .10" when I will when you you use use this this part part
1.16 29.3
.19 [4.8] 4.8
A FRONT VIEW FRONTVIEW
SECTION A-A A-A
9 Padlock Cup Padlock Cup
Part Part Number Number
Material Material
Finish Finish
KH30BK KH3OBK
steel steel
black black powder powder coated coated
KH30SS KH3055
304SS 304SS
passivated passivated
accepts0.375 Ø.375(3/8) (3/8) padlock padlock I accepts will shorten shorten cam cam grip grip by by .08" .08" when I will when you you use use this this part part
A
.875 22.23 0.875[22.23] THRU HOLE HOLE THRU
A A-4-1 TOP VIEW TOP VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.98 24.9
.44 11.1 (2) HOLES
1.38 34.9
.079 2.00
.38 9.5 SECTION A-A SECTION A-A
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
87
Latches
SIERRA PACIFIC ENGINEERING PRODUCTS T-Handle Quarter-turn T-Handle Quarter-turn Latches Latches
NEMA
12
/P65
RATED
Part Part Number Number
black
Material Material
Finish Finish
Key Code Key Code
T-Handle T-Handle
Housing Housing
T-Handle T-Handle
Housing Housing
41-12P 41-12P
plastic plastic
die zinc die cast cast zinc
black black
black black powder powder coated coated
333 333
41-13P 41-13P
plastic plastic
die zinc die cast cast zinc
black black
black black powder powder coated coated
non-locking non-locking
41-12BK 41-12BK
die zinc die cast cast zinc
die zinc die cast cast zinc
black black powder powder coated coated
black black powder powder coated coated
333 333
41-13BK 41-13BK
die zinc die cast cast zinc
die zinc die cast cast zinc
black black powder powder coated coated
black black powder powder coated coated
non-locking non-locking
41-12CH 41-12CH
die zinc die cast cast zinc
die zinc die cast cast zinc
polished polished chrome chrome
polished polished chrome chrome
333 333
41-13CH 41-13CH
die zinc die cast cast zinc
die zinc die cast cast zinc
polished polished chrome chrome
polished polished chrome chrome
non-locking non-locking
41-12SST 41-12SST
316SS 316SS
316SS 316SS
brushed brushed
brushed brushed
333 333
41-13SST 41-13SST
316SS 316SS
316SS 316SS
brushed brushed
brushed brushed
non-locking non-locking
assemblyincludes includesbody bodynut, nut,cam camretaining retainingscrew, screw, and and seals seals (1 (1 internal o-ring and face gasket) I assembly internal o-ring and aa face gasket) camssold soldseparately. separately.See Seepg. pg.95 95for for cams cams & & grip I cams grip dimension dimension intendedfor forNEMA NEMA type I intended type 12 12enclosure enclosure requirements requirements lockingversion version includes includes (2) (2) ringed keys I locking ringed keys
brushed brushed
GRIP -1 GRIP
.785 19.94 .78509.941 .775 L19.69 19.69 .775
.8951-22. 22.73 731 .895 .875L22.23,1 22.23 .875
90° ROTATION
polished polished chrome chrome 3.07 78.0 DUST SHUTTER
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
1.48 37.7
1.26 32.0
RIGHT SIDE SIDE VIEW VIEW RIGHT
FRONT VIEW
Locking Locking L-Handle L-Handle Quarter-turn Quarter-turn Latches Latches
NEMA
12
IP65
RATED
.71 18.0 .71[18.0]
37 6SS
Part Part Number Number
Key Code Key Code
L-Handle & & Housing L-Handle Housing Material Material
Finish Finish
41-11 41-11
K14 K14
die die cast cast zinc zinc
chrome chrome
41-1101 41-1101
K16 K16
die die cast cast zinc zinc
chrome chrome
41-11BK 41-11BK
333 333
die die cast cast zinc zinc
black black powder powder coated coated
41-11SST 41-11SST
333 333
316SS 316SS
brushed brushed
41-15 41-15
non-locking non-locking
die die cast cast zinc zinc
chrome chrome
41-15BK 41-15BK
non-locking non-locking
die die cast cast zinc zinc
black black powder powder coated coated
41-15SST 41-15SST
non-locking non-locking
316SS 316SS
brushed brushed
includesbody bodynut, nut,cam camretaining retainingscrew, screw,and andseals: seals: (2) (2) internal I includes internal o-rings o-rings and and a a face face gasket gasket includes(2) (2) ringed ringed keys keys and stainless steel steel lock lock face I includes and stainless face and and dust dust shutter shutter intendedfor forNEMA NEMA type I intended type 12 12enclosure enclosure requirements requirements camssold soldseparately. separately.See Seepg. pg.95 95for for cams cams & & grip I cams grip dimension dimension GRIP
1.26 [32.0] 32.0 01.26
.895 -22.731 22.73
DUST DUST SHUTTER SHUTTER
.785 19.94 .785[19.941 .775 19.69 .7751_19.69]
.875 22.231 22.23 01%
1.46 [37.0 37.0 ] 1.46
1
FACE GASKET GASKET FACE
A
A
90° 90° MOUNTING DIMENSIONS MOUNTING DIMENSIONS
4.13 [105.0 4.13 05.0]
LOCK LOCK O-RING 0-RING
.71 18.0 1.10 28.0
HOUSING HOUSING O-RING 0-RING SECTION A-A SECTION A-A
FRONT VIEW FRONT VIEW
88 88
Download 31:Immo @ Download @www.spep.com www.spep.com
RIGHT SIDE SIDE VIEW VIEW RIGHT Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges and Industrial industrial Hf-rdware NEMA
NEMA
4
4x
12
Tool Activated Quarter-turn Latches
Tool Activated Quarter-turn Latches
Features Features
DI
ffp n
cam rotates rotates 900 90° I cam intendedfor forNEMA NEMA type type4, 4, 4X 4X & I intended &12 12enclosures enclosures assemblyincludes: includes:cam camretaining retainingscrew, screw,UL UL rated ratedseals seals(o-ring (o-ring & & face I assembly face gasket), gasket), disc disc washer washer housingmaterial: material: die die cast cast zinc zinc I housing camssold soldseparately. separately.See Seepg. pg.95 95 for for cams cams & & grip I cams grip dimension. dimension. for latches .185 [4.70] [4.70] to all cam for latches on on this this page page add add .185 to all cam grips grips to to get get true true grip grip dimension dimension keys sold sold separately separately -- see for key I keys see table table for key part part numbers numbers Part Part Number Number
Description Description
Material Material
Finish Finish
*Key Part *Key Part No. No.
chrome chrome
slotted with with slotted location location dimple dimple
304SS 304SS
polished polished
1123-01 1123-01
7mm 7mm square square
die die cast cast zinc zinc
chrome chrome
14K 14K
1124-01 1124-01
double bitted double bitted
die die cast cast zinc zinc
chrome chrome
18K 18K
die die cast cast zinc zinc
chrome chrome
1120SS-01 112055-01
slotted slotted
1125-01 1125-01
7mm 7mm triangle triangle
.10 2.5 F.10[2.5]
2.50 63.5 2.50[89.5]
7
Head Head Style Style
.250 6.35 HOLE HOLE WITH WITH 0.25018351 .360 I9.14] [9.14] CBORE C'BORE I.0951.891 x .035 [.89] DEEP DEEP 0.980 (2) PLACES PLACES (2)
part 1120-01 part no. no. 1120-01
GRIP
patented patented 1.20 30.5 20[385]
die die cast cast zinc zinc
1120-01 1120-01
Latches
NEMA
no no key key 1.88 47.6 1.88[47.8]
.88 22.2 88[22.2
no no key key .900 22.86 0.900[22.88]
8-32 THD. THD. WELD 8-32 WELD STUD STUD (2) PLACES PLACES (NOT (NOT SUPPLIED) (2) SUPPLIED) MOUNTING DIMENSIONS MOUNTING DIMENSIONS MOUNTING DIMENSIONS
30K 30K
Key Key Locking Locking Quarter-turn Quarter-turn Latches Latches Material Material
Finish Finish
Key Key Code Code
1121-01-B01 1121-01-B01
Part Part Number Number
die cast cast zinc zinc die
black black painted painted
B01 B01
1121-01-B02 1121-01-B02
die cast cast zinc zinc die
black black painted painted
B02 B02
1121-01-B03 1121-01-B03
die cast cast zinc zinc die
black black painted painted
B03 B03
1121-01-B04 1121-01-B04
die cast cast zinc zinc die
black black painted painted
B04 B04
1121-01-B05 1121-01-B05
die cast cast zinc zinc die
black black painted painted
B05 B05
1121NL-01 1121NL-01
die cast cast zinc zinc die
black black painted painted
non-locking non-locking
.250 6.35 HOLE HOLE WITH WITH 8.250[8.95] C'BORE .36019.1818 [9.14] x .035 [.89] DEEP BORE 0.980 .0361891 DEEP (2) PLACES
1.20 30.5 20[30.5]
1.88 47.6 1.88[47.8]
8-32 THD. THD. WELD WELD STUD STUD 8-32 (2) PLACES (2) PLACES (NOT (NOT SUPPLIED) SUPPLIED)
.99 25.1 1-[.99[25.1]
2.00 50.8 r-2.00150.81-
mm I 1.16 29.5 1.18[29.5]
II 'WW GRIP
.88 22.2 .88[22.2]
Ill Wile
.900 22.86 0.900[22.8e]
2.50 63.5 2.50[89.5
MOUNTING DIMENSIONS MOUNTING DIMENSIONS MOUNTING DIMENSIONS 1.20 30.5
Part Part Number Number
1122-01 1122-01
Material Material
Finish Finish
die die cast cast zinc zinc
black black painted painted
1.20 30.5
Slotted Padlocking Defeater Defeater Latch Latch Slotted Padlocking .250 6.35 HOLE WITH
C'BORE .360 [9.14] x .035 [.89] DEEP (2) PLACES 6.35 ] HOLE HOLE WITH WITH 250[535 0 .250
C'BORE .360 [9.14] x•8951901 .035 [.89] DEEP DEEP ORE 0 .35019.141 (2) PLACES (9) 1.88 47.6 1.88 47.6 1.55[4,..]
8-32 THD. WELD STUD
(2) PLACES (NOT SUPPLIED) tiilLT,11.171A-SZYALIED)
1.09 27.7 1.09[78.T]
3.00 76.2
1.09 27.7
3.00 76.2
1.16 29.5
.900 22.86 0.993[22.88] 1.16 29.5
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
GRIP GRIP
Request Info
1-800-453-1692 www.aboveboardelectronics.com
HOLE FOR A Ø.250 [6.35] MAX. PADLOCK HOLE FOR A Ø.250 [6.35] MAX. PADLOCK
.88 22.2 .55[98.91 .88 22.2 2.50 63.5 2.50183.5 2.50 63.5
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
89 89
Latches
SP-111111 PACIFIC ENGINEERING PRODUCTS
Padlocking Quarter-turn Handle Padlocking Quarter-turn Handle
NEMA
12 L-Handle L-Handle & &Housing Housing
Part Part
+.005 +.13 .791Number - .000 20.10 .00 Number
2.74 69.6 2.74[69.6] 1.25 31.8
Material Material
1.43 36.2 1.43[36.2]
aluminum handle handle & & aluminum keeper keeper
41-146K 41-14BK
matte black powder matte black powder .886±.010 22.50±.25 coated coated
includesbody bodynut, nut,cam camretaining retainingscrew, screw, two two lock lock washers, washers, and I includes and seals (internal face gaskets) seals (internal o-ring o-ring and and two two face gaskets) intendedfor forNEMA NEMA type I intended type 12 12enclosure enclosure requirements requirements camssold soldseparately. separately.See See page page95 95for for cams cams & & grip I cams grip dimension dimension
.71 18.0
90°
Finish Finish
4.33 110.0
4.80 122.0
+.005 +.13 .791 - .000 20.10 .00 .79132[20.10*:4
.51[ 13.0 0.51 13.0] (2) THRU THRU HOLES HOLES (2)
.91 23.0
.886 .010 22.50 .25 0.888±.010[22.50.1.25]
.59 15.0
.25 6.3 .79 20.0
.413±.010 10.50±.25 .59 15.0 .59[15.0]
.80 20.3
4.80 122.0 4.80[ 22.0]
1.00 25.3
<3.
RIGHT SIDE SIDE VIEW VIEW RIGHT
FRONT VIEW VIEW FRONT
PANEL CUT-OUT DIMENSIONS
.413 .010[10.50.1.25] 10.50 .25 \-¢.413.1.010 MOUNTING DIMENSIONS
Padlocking Quarter-turn L-Handle L-Handle Latches Padlocking Quarter-turn Latches
IP65
RATED
316SS
Part Part Number Number 18.0 .71 [18.0]
1.67 42.5 1.87[42.5]
1.38 35.0 A
1.38 35.0
Material Material
Finish Finish
41-17 41-17
die zinc die cast cast zinc
chrome chrome plated plated
41-17BK 41-176K
die zinc die cast cast zinc
smooth, black black powder smooth, powder coated coated
41-17SST 41-17SST
316SS 316SS
brushed brushed
1.54 39.0
A
accepts up up to to 0375 Ø.375(3/8) (3/8) padlock padlock I accepts camssold soldseparately. separately.See See page page95 95for for cams cams & & grip I cams grip dimension dimension .413 10.50 x.800 x .600[15.25] [15.25] 0.413[10.50] (2) OBROUNDS
.791 20.10
.886 [22.50] 22.50 0.886
4.53 [115.0 15.0]
.413 10.50 X .600[15.25] (2) OBROUNDS
4.53 115.0
MOUNTING DIMENSIONS A
.60 15.2 .80[15.2]
SECTION A-A A-A SECTION
.60 15.2
A
L-Handle L-Handle Quarter-turn Quarter-turnLatches Latcheswith with 304SS 304SS Padlock Padlock Plate Plate SECTION A-A
IP65
RATED
EW PRODU,T WILY
Part Part Number Number A A-.41 7
.57 14.5 .57[14.5]
1.49 37.9
1.26 32.0
1.38 35.0
1.54 39.0
Material Material
Finish Finish
41-16 41-16
die die cast cast zinc zinc
chrome chrome plated plated
41-16BK 41-166K
die die cast cast zinc zinc
textured, black black textured, powder powder coated coated
includes body body nut, nut, mounting mounting screw screw and and seals seals I includes acceptsup upto to0.25 Ø.25(1/4) (1/4) padlock padlock I accepts camssold soldseparately. separately.See See page page95 95for for cams cams & & grip I cams grip dimension dimension padlock plate plate is is spring spring loaded I padlock loaded
A
4.13 105.0 1.14 28.9 .413 10.50 X .600[15.25] (2) OBROUNDS
22.50 .886 [22.50] 0 .886
.791 20.10
4.53 115.0 .59 15.0
A
MOUNTING DIMENSIONS
SECTION A-A SECTION A-A
90
Request Info
Download 31)moDELs @ @www.spep.com www.spep.com Download
1-800-453-1692 www.aboveboardelectronics.com
A
.60 15.2
Hinges and Hinges and Industrial industrial Hardware bfrrdWare
Description Description
Key Key Part Part No. No.
41-20BK 41-20BK
slotted slotted
no no key key
41-21BK 41-21BK
3mm 3mm double double bitted bitted
4-14K 4-14K
41-22BK 41-22BK
7mm triangle 7mm triangle
4-15K 4-15K
41-23BK 41-23BK
7mm 7mm square square
4-16K 4-16K
41-24BK 41-24BK
8mm square 8mm square
4-19K 4-19K
53BK-02 53BK-02
200 200
Material Material
Finish Finish
die cast cast zinc zinc die
matte matte black black
Padlocking Quarter-turn Cabinet Padlocking Quarter-turn Cabinet Latches Latches
.512 13.00 0.512[13.00] (2) HOLES (2) HOLES
.785 x19.941 19.94 .785 .775 19.69 19.69 .775
S.
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
SLOTTED SLOTTED
1.26 32.0 01.26[32.0,
.75 19.0 .75[19.0]
.98 25.0 .98[25.0]
7MM 3MM 3MM 7MM TRIANGLE DOUBLE DOUBLEBITTED BITTED TRIANGLE
7MM 7MM SQUARE SQUARE
alb
handlerotation rotationisis adjusted adjusted by by repositioning repositioning the the 90° 90° I handle stop washer washer on rear of stop on the the rear of the the handle handle camssold soldseparately. separately. See See pg. pg. 100 100 for for cams I cams cams and and grip dimensions grip dimensions
3.63 92.2 3.63[92.2]
IP65
RATED
.76 19.4 0.76[ 19.4 ] SQ. SQ.
.98 25.0
Part Key Code Code PartNumber Number Key
12
.895 22.73 895r22.731 .875 22.23J .8751_22.23
material: die die cast cast zinc, zinc, black I material: black powder powder coated coated I intended intendedfor forNEMA NEMA 4, 4, 12 12 and and IP65 IP65 enclosure enclosure requirements requirements .512 13.00 includes: I includes: (2) HOLES seal) ►UL ULrated rated seals seals (o-ring (o-ring and and face face seal) mounting screw screw I mounting body nut nut I body disk washer washer I disk .76 19.4 camssold soldseparately. separately. See pg. pg. 95 95 for for cams I cams cams and and1.26 32.0 SQ. See grip dimension grip dimension .75 19.0
NEMA
4
Latches
Part Part Number Number
NEMA
1.10 28.0 1.10 [28.0]
.54 13.8
3MM DOUBLE BITTED
8MM 8MM SQUARE SQUARE
Spring Loaded Handle Handle Latch Latch Spring Loaded
23.5 .93 [23.5] .93
90° 90° CCW CCW ROTATION ROTATION
90° 90° CW CW ROTATION ROTATION
SLOTTED
62.0 2.44 [62.0] 2.44
.41 [10.5] 10.5 .41
MOUNTING DIMENSIONS DIMENSIONS MOUNTING FOR .04 .04 [1.0] FOR [1.0] -- .16 .16 [4.0] [4.0] PANEL THICKNESS THICKNESS PANEL
Spring Loaded Handle Handle Latch Latch Spring Loaded Part Key Code Code PartNumber Number Key
53G-01 536-01
200 200
Material Material
Finish Finish
zinc die zinc die cast cast
grey grey
handlerotation rotationisis adjusted adjusted by by repositioning repositioning the the 90° 90° I handle stop washer washer on rear of stop on the the rear of the the handle handle camssold soldseparately. separately. See See pg. pg. 100 100 for for cams I cams cams and and grip dimensions grip dimensions 65.0 2.56 [65.0] 2.56 20.0 .79 [20.0] .79
20.0 .79 [20.0] .79
.65 [16.5] 16.5 .65
.93 23.5 93 [23.5]
a 62.5 2.46 [62.5] 2.46
2.99 76.0 90° 90° CW CW ROTATION ROTATION
JD
90° b 90° CCW CC W ROTATION ROTATION
IWO 1.06 [27.0] 27.0 1.06 MOUNTING DIMENSIONS DIMENSIONS MOUNTING FOR .04 .04 [1.0] [1.0] -- .08 FOR .08 [2.0] [2.0] PANEL THICKNESS THICKNESS PANEL
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
91 91
Latches
PACR'''C ENGINEERING PROP"" --Stainless Steel Defeater DefeaterL-Handle L-Handle Latches Stainless Steel Latches .04
316.5S
NEMA 4,x
Description Description
Key Key Part Part No. No.
Material Material
Finish Finish
Shaft Shaft Length Length
Shaft Shaft Style Style
3951SST 3951SST
slotted plug plug slotted
no no key key
316SS 316SS
passivated passivated
1.52] 152 [38.7] [38.7
threaded threaded
3950SST* 3950SST*
non-locking non-locking
no no key key
316SS 316SS
passivated passivated
1.52] 152 [38.7] [38.7
threaded threaded
3950SST-333 395055T-333
key key locking locking
Key Key Code Code 333 333 (2 (2 keys keys included) included)
316SS 316SS
passivated passivated
1.52 1.52 [38.7] [38.7]
threaded threaded
3955SST-333* 3955SST-333*
key key locking, locking, non-defeater non-defeater
Key Key Code Code 333 333 (2 (2 keys keys included) included)
316SS 316SS
passivated passivated
1.52 1.52 [38.7] [38.7]
threaded threaded
Part Part Number Number
Shaft Shaft Mounting Mounting Size Size
.312 .312
[7.9] [7.9]
.312 .312 [7.9] [7.9]
blind blind
blind blind
patent patent pending pending
*part no. no. 3950SST & 3955SST-333 I *part 395055T & 395555T-333 are are non-defeater non-defeater handles handles handle90° 90° rotation rotation is is adjustable by repositioning washer on rear of I handle adjustable by repositioning the the stop stop washer on the the rear of the the handle handle threadedshafts shaftshave havean anM10 M10 xx 1.5 1.5 thread I threaded thread all handles handlesaccept accept0.38 Ø.38[9.5] [9.5] (3/8) (3/8) padlock I all padlock sealing gasket gasket is is built I sealing built into into the the escutcheon escutcheon intendedfor forNEMA NEMA type I intended type 4X 4Xenclosure enclosurerequirements requirements camssold sold separately, separately, see see page page 95 95 for for cams cams and grip dimension I cams and grip dimension
2.16 [54.9] 54.9 2.16
1.52 [38.7] 38.7 1.52
2.52 [64.0] 64.0 02.52 .79 [20.0] 20.0 SQ. SQ. .79
3.21 [81.7] 81.7 3.21
1.77 [45.0] 45.0 1.77 .89 22.5 .89 [22.5] .49 [12.5] 12.5 .49
.413 10.50 FOR FOR 0.413[10.50] A 3/Er 3/8" PADLOCK A PADLOCK
M6 THD. THD. M6 (3) PLCS. PLCS. (3)
6.19 [157.3] 157.3 6.19 1.00 [25.4] 25.4 1.00
.887 22.53
1.417 35.99 .439 11.15 20.10 SC). SQ. -.1 .791 [2010]
1..-
F,
.890 22.60 MAX MAX. /- 0.890 [22.60]
ti
.346 8.79 COOPER B-LINE
.276 [7.00] 7.00 0.276 OPTIONALHOLES HOLES /- (4)(4) OPTIONAL
45.72 1.800 [45.72] 1.417 36.00 1.417[96.00]
V
1.800[45.72] 45.72 -.11.800 .887 22.53
.335 [8.50] 8.50 xx .441 .441 [11.20] OBROUND OBROU ND .886 22.50
MOUNTING DIMENSIONS DIMENSIONS MOUNTING .89 22.5
1.42 36.0
.335 8.50
Request Info
1-800-453-1692
.89 22.5 .49 12.5
www.aboveboardelectronics.com
92 92
Download 31:Immo @ Download @www.spep.com www.spep.com
.236 6.00 ALLEGIS / INDUSTRILAS
EMKA
.312 312 [7.9] [7.9]
.312 .312
[7.9] [7.9]
blind blind
blind blind
Hinges Industrial Hardware Hinges and ind Incir•ctrial I-frrdware
Part Part Number Number
Shaft Shaft Length Length
Description Description
Key Key Part Part No. No.
Material Material
Finish Finish
3950 3950
non-locking non-locking
no no key key
die zinc die cast cast zinc
matte black matte black powder powder coated coated
3950-333 3950-333
key key locking locking
Key Key Code Code 333 333 (2 (2 keys keys included) included)
die zinc die cast cast zinc
matte black matte black powder powder coated coated
3950-751 3950-751
key key locking locking
matte black Key CH 751 751 Key Code Code CH matte black die zinc die cast cast zinc powder (2 (2 keys keys included) included) powder coated coated
3951 3951
slotted slotted
no no key key
die zinc die cast cast zinc
matte black matte black powder powder coated coated
3952 3952
7mm 7mm triangle triangle
4-15K 4-15K
die zinc die cast cast zinc
matte black 1.44 1.44 matte black powder [36.6] powdercoated coated [36.6]
3953 3953
7mm 7mm square square
4-16K 4-16K
matte black matte black die zinc die cast cast zinc powder powder coated coated
3954 3954
3mm 3mm double double bitted bitted
4-14K 4-14K
die zinc die cast cast zinc
matte black matte black powder powder coated coated
3955-333* 400 3955-333*
key key locking locking
Key Key Code Code 333 333 (2 (2 keys keys included) included)
die zinc die cast cast zinc
matte black matte black powder powder coated coated
3955-751* IMP 3955-751*
key key locking locking
matte black Key CH 751 Key Code Code CH 751 matte black die zinc die cast cast zinc powder (2 (2 keys keys included) included) powder coated coated
Die L-Handle Latches Die Cast Cast Zinc Zinc Defeater Defeater L-Handle Latches Shaft Shaft Style Style
Shaft Shaft Size Size
Mounting Mounting
threaded threaded
.312 312 [7.9] sq. [7.9] sq.
blind blind
are non ►** part part no. no. 3955-333 3955-333 and and 3955-751 3955-751 are non defeaters defeaters handle90° 90° rotation rotation is is adjustable by repositioning rear of I handle adjustable by repositioning the the stop stop washer washer on on the the rear of the the handle handle threadedshafts shaftshave havean anM10 M10 xx 1.5 1.5 thread I threaded thread all handles handles accept accept 038 Ø.38[9.5] [9.5] (3/8) (3/8) padlock padlock I all sealing gasket gasket is is built I sealing built into into the the escutcheon escutcheon intendedfor forNEMA NEMA type I intended type 4X 4Xenclosure enclosurerequirements requirements keys are are included included with with handles, handles, except except for for part no.: 3952,3953, & 3954 I keys part no.: 3952,3953, & 3954 camssold sold separately, separately, see see page page 95 95 for for cams grip dimension I cams cams and and grip dimension
CS 0 KEY KEY
SQUARE SLOTTED 1011E SLOTTED
Latches
NEMA 4x
part part no. no. 3950-333 3950-333 patented
part no. 3951
DOUBLE TRIANGLE DOME! TRIANGLE BITTED
2.62 [66.6] 66.6 2.62
2.60 66.0
1.80 [45.7] 45.7 1.80
1.44 [36.5] 36.5 1.44 18.9 SQ. SQ. .75 [18.9] .75 7.94 .312 [7.94] SQUARE SQUARE
7 3/8-24 THD. 18.0 .71 [18.0] .390 9.91 FORA FOR A 0.390[9.91] 3/8" PADLOCK PADLOCK 3/8"
6.19 157.3 6.19[ 57.3]
1.80 [45.7] 45.7 1.80
79.2 3.12 79.2] 3.12
.52 [13.1] 13.1 .52
M22 THD.
M6 THD. (5) PLACES
1.00 [25.4] 25.4 1.00
.887 22.53
46.1 1.81 [46.1]
1.18 [30.0] 30.0 -4-1.18
F
7 35.99 .439 11.15
.791 20.10 .791 [2010]SQ. SO.-.1
.890 [22.60] 22.60 MAX. MAX. 0 .890
.346 8.79 .276 [7.00] 7.00 0.276 /- (4)(4) OPTIONAL OPTIONALHOLES HOLES
COOPER B-LINE
1.800 [45.72] 45.72 1.800 1.417 36.00 1.417 [96.00]
V
1.800 1.800 [45.72] 45.72 .887 22.53
.335 [8.50] 8.50 xx .441 .441 [11.20] [11.20] OBROUND OBROUND .886 22.50
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
.89 22.5
36.0
.89 22.5 .335 8.50
LEGIS / INDUSTRILAS
Request Info
.49 12.5
1-800-453-1692
.236 6.00
www.aboveboardelectronics.com EMKA
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
93 93
Latches
PP"IfFla"-VGINEERING AND PRODUCTS
Three Point Point Cam Cam Kit Kit Three Part Part Number Number
L
C11 C11
1.625 [41.28] [41.28] 1.625
C12 C12
2.125 [53.98] [53.98] 2.125
for .313" .313" sq. I for sq. shaft shaft I die diecast castzinc zincwith withmill mill finish finish usewith with723 723 rods rods (see (see pg. pg. 61) 61) I use camand andcover cover kits kits are I cam are shipped shipped separately in in bulk bulk separately
part no. C11 C11 part no.
.25 6.4 HOLE HOLE 0 25[6.4] WITH 82° WITH 82° C'SINK CSINK
L L
A A
A 1.41 35.8
part C12 part no. no. C12
0 TOP VIEW VIEW TOP CAM CAM
TOP VIEW VIEW TOP COVER COVER .07 .07[ 1.9 1.9 ]
.26 6.6 .26[6.6]
.116 2.95 116[2.95]-i .37 9.3 37[9.3]
of SECTION A-A SECTION A-A COVER COVER
FRONT VIEW FRONT VIEW CAM CAM 1.13 28.6
.72 18.3 .72[18.3]
.54 13.6
®~ .32 8.2 SQ.
1.41 35.8 1.41[35.8
UJ 0
BOTTOM VIEW BOTTOM VIEW CAM CAM
.32 8.2 SQ. SQ. x x t_.32[8.2] .19 [4.7] DEEP .19 [4.7] DEEP
BOTTOM VIEW BOTTOM VIEW COVER COVER
Three Point Cams Three Point Offset Offset Cams Part Part Number Number
1.42 [36.0] 36.0 1.42 CENT. CENT. .79 20.0 .79 [20.0]
1.77 [45.0] 45.0 1.77
OFFSET CAM
Offset Offset
12C52 12C52
straight straight
12C53 12C53
.08 [2.0] [2.0] .08
12C54 12C54
.16 [4.0] [4.0] .16
12C55 12C55
.24 [6.0] [6.0] .24
12C56 12C56
.28 [7.0] [7.0] .28
12C57 12C57
.31 [8.0] 31 [8.0]
12C58 12C58
.39 [10.0] 39 [10.0]
12C59 12C59
.47 [12.0] [12.0] .47
12C60 12C60
.55 [14.0] [14.0] .55
12C61* 12C61*
.63 [16.0] [16.0] .63
steelcam cam with with die die cast cast zinc zinc rod I steel rod adapter adapter and e-clips e-clips and I finish: finish: zinc zinc plated plated ►** non-stock non-stock
.157 4.00 THK.
1.16 29.5 1.16[29 5]
.323 8.20 .323[8.201 .317 8.05 .31718.05J CENT. CENT.
94 94
Download 3DmoDELs @ @www.spep.com www.spep.com Download
.323 8.20 x x 0.323[8.20] .642 [13.60] DEEP .642 [13.60] DEEP
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Industrial Hardware Hardware Hinges and
Grip ** Grip
Steel Steel No. Part Part No.
304SS 304SS Part Part No. No.
Cam Cam Offset Offset
[3.50] .138 [3.50] .138
12C1 12C1
12C1SS 12C155
[4.00] .157 [4.00] .157
12C15 12C15
12C15SS 12C1555
in [13.50] in .531 531 [13.50]
[6.00] .236 [6.00] .236
12C16 12C16
12C16SS 12C1655
.453 in [11.50] in .453 [11.50]
.75 19.0
OFFSET OFFSET IN
in [14.00] in .551 [14.00] .551
[8.00] .315 [8.00] .315
12C17 12C17
12C17SS 12C1755
[9.50] in .374 [9.50] .374 in
[10.00] .394 [10.00] .394
12C18 12C18
12C18SS 120 8SS
in [7.50] in .295 295 [750]
.512 [13.00] .512 [13.00]
12C19 12C19
12C19SS 12C1955
[4.50] in .177 [4.50] .177 in
[14.00] .551 [14.00] .551
12C10 12C10
12C10SS 12C1OSS
[3.50] in .138 [3.50] .138 in
[16.00] .630 [16.00] .630
12C20 12C20
12C20SS 12C2055
in .059 [1.50] .059 [150] in
.689 [17.50] .689 [1750]
12C4 12C4
12C4SS 12C455
straight straight
[17.50] .689 [17.50] .689
12C8 12C8
12C8SS 12C8SS
1.77 45.0 * 8MM SQ. 8MM SQ.
FRONT VIEW FRONT VIEW
straight straight
.689 [17.50] .689 [1750]
12C9 12C9
N/A N/A
straight, hooked straight, hooked (see (see illustration) illustration)
[17.50] .689 [17.50] .689
12C9-01 12C9-01
N/A N/A
straight, straight, hooked hooked (see (see illustration) illustration)
[19.00] .748 .748 [19.00]
12C5 12C5
12C5SS 12C5SS
.059 [1.50] .059 [150] out out
.768 [19.50] .768 [1950]
12C2 12C2
12C2SS 12C2SS
.079 .079 [2.00] [2.00] out out
[20.00] .787 [20.00] .787
12C22 12C22
12C2255 12C22SS
.098 [250] out out .098 [2.50]
[22.00] .866 [22.00] .866
12C6 12C6
12C6SS 12C655
.177 [4.50] .177 [4.50] out out
[24.00] .945 [24.00] .945
12C23 12C23
12C23SS 12C2355
.256 [6.50] .256 [650] out out .295 [750] out out .295 [7.50]
SIDE VIEWS SIDE VIEWS
37.8 1.49 [37.8] 1.49 7.6 .30 7.8] .30
36.1 1.42 1.42 [38.1
25.4 1.00 [25.4] 1.00
DUAL STUD DUAL STUD FOR FOR REVERSIBLE USE REVERSIBLE USE
8MM SQ. 8MM SQ.
SIDE VIEW RIGHT SIDE RIGHT VIEW
FRONT VIEW FRONT VIEW
[25.00] .984 [25.00] .984
12C24 12C24
12C24SS 12C2455
[26.00] 1.024 1.024 [26.00]
12C11 12C11
12C11SS 12C11SS
[8.50] out .334 334 [850] out
[28.00] 1.102 1.102 [28.00]
12C25 12C25
12C25SS 12C2555
.413 [10.50] .413 [10.50] out out
1.142 [29.00] [29.00] 1.142
12C7 12C7
12C7SS 12C755
.453 [11.50] [1150] out out .453
[29.50] 1.161 1.161 [29.50]
12C37 12C37
12C37SS 12C3755
.472 [12.00] .472 [12.00] out out
[30.00] 1.181 [30.00] 1.181
12C26 12C26
12C26SS 12C2655
.492 [12.50] .492 [12.50] out out
1.220 [31.00] 1.220 [31.00]
12C3 12C3
12C3SS 12C355
[13.50] out 531 [1350] out .531
[32.00] 1.260 1.260 [32.00]
12C27 12C27
12C27SS 12C2755
.571 [14.50] .571 [14.50] out out
[34.00] 1.339 [34.00] 1.339
12C13 12C13
12C13SS 12C13SS
.649 [16.50] .649 [16.50] out out
[35.00] 1.378 [35.00] 1.378
12C28 12C28
12C28SS 12C2855
.689 [1750] out out .689 [17.50]
[36.00] 1.417 1.417 [36.00]
12C29 12C29
12C29SS 12C2955
.728 .728 [18.50] [1850] out out
[37.00] 1.457 1.457 [37.00]
12C12 12C12
12C12SS 12C1255
.768 [19.50] .768 [19.50] out out
8MM SQ.
[38.00] 1.496 [38.00] 1.496
12C30 12C30
12C30SS 12C3055
.807 [20.50] out out .807 [20.50]
FRONT VIEW FRONT VIEW
[40.00] 1.575 1575 [40.00]
12C31 12C31
12C31SS 12C31SS
.886 .886 [22.50] [2250] out out
[42.00] 1.654 [42.00] 1.654
12C32 12C32
12C32SS 12C3255
.964 [24.50] .964 [24.50] out out
[44.00] 1.732 [44.00] 1.732
12C33 12C33
12C33SS 12C3355
1.043 [26.50] [26.50] out out 1.043
[45.00] 1.772 1.772 [45.00]
12C34 12C34
12C34SS 12C3455
1.083 1.083 [27.50] [2750] out out
[47.00] 1.850 [47.00] 1.850
12C35 12C35
12C35SS 12C3555
1.161 1.161 [29.50] [2950] out out
12C36 12C36
12C36SS 12C3655
1.280 [32.50] [32.50] out out 1.280
[50.00] 1.969 [50.00] 1.969
part 12C9-01 • part no. no. 12C9-01
1.25 31.8 .32 8.2
1.56 39.7
as grips same same as grips on on cam cam table table
[18.0] .71 [18.0] .71
[.51] to .02 [.51] add .02 add to grips grips on on cam cam table table
.75 [19.1] .75 [19.1]
add .06 [1.52] to to grips grips on on cam cam table table .06 [1.52] add
.88 [22.4] .88 [22.4]
.186 [4.72] add .186 [4.72] to to grips grips on on cam cam table table add
Request Info
1-800-453-1692 www.aboveboardelectronics.com
VIEW SIDE VIEW RIGHT RIGHT SIDE
GRIP GRIP
GRIP GRIP
II III
Grip for Correct Add for to Add Dimension to Correct Grip Dimension
.69 [17.5] .69 [17.5]
STUD STUD ON ON ONE SIDE SIDE ONE
no. 12C9 part 12C9 part no.
[45.0] 1.77 [45.0] are 1.77 cams are all other long; all [32.0] long; 1.26[32.0] 0 • part other cams 12C8isis1.26 number12C8 partnumber illustrated as illustrated sides as both sides on both stud on has stud 12C9-01 has 0 • part number 12C9-01 part number & 304SS 0 steel 30455 parts parts are are passivated passivated plated & zinc plated are zinc parts are steel parts 0 ** grips grips shown shown are are for for latches latches with with .69 .69 [17.5] [17.5]body bodylength lengthon on pages pages 82 85 (see (see body body length length table table below below for for other other latch latch body body lengths) lengths) 82 -- 85 pg. 94 on pg. 0 three-point 94 available on are available cams are three-pointcams Body Body Length Length
OFFSET OUT
STRAIGHT STRAIGHT CAM CAM
Latches
Cams Latch Cams Quarter-turnLatch Quarter-turn
ii
J
of
L
j tf
1I
FRONT-MOUNT FRONT-MOUNT BODY LENGTH LENGTH BODY
REAR-MOUNT REAR-MOUNT BODY BODY LENGTH LENGTH
To Place To Place Order: Order:
800.4335554 800.433.5554
[email protected] J
[email protected]
95
SiirgeRil PACIFIC ENGINEERING PROP ---
Latches
""
Padlockable Enclosure with Cam Padlockable EnclosureLatch Latch with Cam 4/D Part Part Number Number
58 58
.04 1.0 - .18[4.5] PANEL THICKNESS
2.30 [58.5] 58.5 2.30
1.77 45.0
4.63 117.5
1.16 29.5
2.87 72.8
grey grey
2.30 5
4.63 117.5
2.87 72.8
1.16 [29.5] 29.5 1.16
•
5.41 137.5
2.64 [67.0] 67.0 2.64
1.75 44.5 .75[44.5]
MOUNTING MOUNTING DIMENSION DIMENSION
Locking Padlockable Enclosure Latch Locking Padlockable Enclosure Latch with with Rod Rod Adapters Adapters
Finish Finish
1.77 45.0
5.02 [127.5 5.02 27.5]
5.41 137.5
2.64 67.0
1.75 44.5
.04 1.0 -- .18[4.5] .18[4.5] .04[1.0] PANEL THICKNESS THICKNESS PANEL
Material Material die cast cast zinc die zinc
Part Part Number Number
58MLK 58MLK
MOUNTING
Material Material
Finish Finish
die cast cast zinc die zinc
grey grey
for08mm Ø8mmrods, rods,see see pg.101 pg.101 I for
.04-.18 [1.0-4.5] PANEL THICKNESS
2.80 71.0
1.65 42.0 TYP.
91.5 3.60 91.5] 3.60
3.60 91.5 5.28 134.0
4.15 105.5
4.69 119.0 4.139 ] 19.0]
4.67 118.5
5.28 134.0 528] 34.0]
4.15 105.5
4.67 118.5
8.00 .315 [8.00] 4.315
.315 8.00 2.60 66.0
2.80 71.0
.04-.18 [1.0-4.5] .04,18 .0-4.5] PANEL PANEL THICKNESS THICKNESS
1.65 42.0 TYP.
2.60 66.0 2.60[58.0]
2.28 58.0
2.30 [58.5] 58.5 2.30
2.28 58.0
-4-
2.30 58.5
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
MOUNTING DIMENSIONS
Locking Padlockable with Rod Adapters Locking PadlockableEnclosure EnclosureLatch Latch with Rod Adapters 411 1D Part Part Number Number
58LLK 58LLK
Material Material
Finish Finish
die cast cast zinc die zinc
grey grey
for08mm Ø8mmrods, rods,see see pg.101 pg.101 I for
3.43 87.0
3.43 87.0 .04 1.0 -.18 [4.5] PANEL THICKNESS
2.97 75.5 -.--2.97[75.5]
2.36 60.0 TYP.
.04 1.0 -.18 [4.5] [4.5] .04[1.0]-.18 PANEL PANEL THICKNESS THICKNESS
4.63 117.5 4.133 [ 17.5]
4.63 117.5 6.95 176.5
6.95 176.5 6.59 167.5 13.59[ 67.5] 6-95 E 784
5.94 151.0 6.95 176.5
5.94 151.0 6.95 176.5
.315 [8.00] 8.00 0.315
.315 8.00
2.60 66.0
2.97 75.
2.36 60.0 TYP.
2.60 66.0 2.60[58.0]
3.43 87.0
1
3.43[87.0] 87.0 -.-3.43
MOUNTING DIM
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
96 96
Download Download 31:Immo @@www.spep.com www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges "`-teesand and Industrial Industri -1 Hardware Hare/IA-re
54CH 54CH
Material Material
Finish Finish
die cast zinc die cast zinc
polished polished chrome chrome
2.68 [68.0] 68.0 2.68 1.65 [42.0] 42.0 1.65
.81 20.5 .80 20.2 SQ.
.94 [24.0] 24.0 .94 8.0 SQ. SQ. .31 [8.0] .31
5.59 [142.0 5.59 42.0]
DI
2-
handlerotates rotatesclockwise clockwise or or counterclockwise counterclockwise I handle camssold soldseparately separately (see (see pg. I cams pg. 100) 100) assembly includes: includes: I assembly facegasket gasket & I face & internal internal O-ring 0-ring housing ring ring I housing body nut nut I body fastenersand and mounting mountingaccessories accessories I fasteners
1.32 [33.5] 33.5 1.32
Latches
Padlocking Swing Padlocking Swing Handle Handle Part Number Part Number
.79 [20.0] 20.0 .79 SQ. SQ.
FITS UP TO 1/2" PADLOCK
I-1 3.13 [79.5] 79.5 3.13
.89 22.6 .87 22.1
3.13 79.5
1 1.15 [29.2] 29.2
.256 6.50 .04 [1.0] 1.0 .04 GASKET
.39 [10.0] 10.0 .39
.39 10.0 PANEL THICKNESS .39 .04 [10.0] 1.0 PANEL .04 1.0
MOUNTING DIMENSIONS
Padlocking Swing Padlocking Swing Handle Handle Part Number Part Number
54SS 5455
Material Material
Finish Finish
304SS 304SS
brushed brushed
handlerotates rotatesclockwise clockwise or or counterclockwise counterclockwise I handle camssold soldseparately separately (see (see pg. I cams pg. 100) 100) assembly includes: includes: I assembly I face facegasket, gasket, internal internal O-ring, 0-ring, & & mounting mounting O-ring 0-ring housing ring ring I housing body nut nut I body fastenersand and mounting mountingaccessories accessories I fasteners
'We \
.81 [20.51 20.5 .81 .80 20.2 SQ. ". -"-.801_20.2]
2.68 [68.0] 68.0 2.68 1.26 [32.0] 32.0 1.26
1.59 [40.5] 40.5 1.59
.79 [20.0] 20.0 .79
.89 22.6
.31 [8.0] SQ. 8.0 SQ. .31
20.0 SQ. SQ. .79 [20.0] .79 5.39 5.39 [137.0 37.0]
FITS UP UP TO TO FITS 7/16" PADLOCK
80.0 3.15 3.15 [80.0] 80.0 3.15 3.15 [80.0]
.335 [8.50] 8.50 0.335
1.20 [30.5] 30.5 1.20 .10 2.5 .10[2.5] GASKET
.39 [10.0] 10.0 .39
Request Info
1-800-453-1692 www.aboveboardelectronics.com
22.1 2 *71 0 .87 S9 [L
-.10.0 .39 [10.01 .39 PANELTHICKNESS THICKNESS .04 1.0 PANEL .04 1.0
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
97 97
Latches
SIERRA PACIFY' IGINEERING AND PRODUCTS
Large Swing Large Swing Handles Handles
IP65
RATED
NEMA
12 Key Key Code/ Code/ Plug Plug
Length Length
Material Material
Finish Finish
key key locking locking
EK333 EK333
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
key key locking locking
CH751 CH751
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
key key locking locking
E200 E200
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated black black housing, housing, black black powder powder coated coated handle handle
Part Part Number Number
Description Description
50L-333 50L-333 50L-751 50L-751 50L-E200 600 50L-E200 50L-333P01 50L-333P01
key key locking locking
EK333 EK333
.71 [18.0] [18.0] .71
polyamide polyamide housing, housing, die die cast cast zinc zinc handle handle
50L-333P02 50L-333P02
key key locking locking
EK333 EK333
.79 [20.0] [20.0] .79
polyamide polyamide housing, housing, die die cast cast zinc zinc handle handle
black black housing, housing, black black powder powder coated coated handle handle
50L-751P01 50L-751P01
key key locking locking
CH751 CH751
.71 .71 [18.0] [18.0]
polyamide polyamide housing, housing, die die cast cast zinc zinc handle handle
black black housing, housing, black black powder powder coated coated handle handle
50L-333P 50L-333P
key key locking locking
EK333 EK333
.79 [20.0] [20.0] .79
polyamide polyamide
black black
50L-751P 50L-751P
key key locking locking
CH751 CH751
.79 [20.0] [20.0] .79
polyamide polyamide
black black
50L-333LK 50L-333LK
key key locking locking padlocking padlocking
EK333 EK333
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
50L-751LK 50L-751LK
key key locking locking padlocking padlocking
CH751 CH751
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
50L-12 50L-12
tool activated tool activated
slotted plug plug slotted
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
50L-22 50L-22
tool activated tool activated
Bellcore Bellcore plug plug
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
50L-22LK 600 50L-22LK
tool activated, tool activated, padlocking padlocking
8mm hex 8mm hex
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black textured textured powder powder coated coated
50L-23LK 408 50L-23LK
tool activated, tool activated, padlocking padlocking
11mm 11mm hex hex pin pin
.79 [20.0] 39 [20.0]
die zinc die cast cast zinc
black black textured textured powder powder coated coated
50L-18 50L-18
tool activated, tool activated, 4-14K 4-14K
3mm double 3mm double bitted bitted plug plug
.79 [20.0] 39 [20.0]
die zinc die cast cast zinc
black black powder powder coated coated
50L-1801 50L-1801
tool activated, tool activated, 4-14K 4-14K
5mm 5mm double double bitted bitted plug plug
.79 [20.0] 39 [20.0]
die zinc die cast cast zinc
black black powder powder coated coated
8mm triangle 8mm triangle
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
non-locking non-locking
none none
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
non-locking, non-locking, padlocking padlocking
none none
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black textured textured powder powder coated coated
key key locking locking padlocking padlocking
50L-30 50L-30 50L 50L 4L 50L-LK 50L-LK
tool activated, tool activated,
swing handle handlemay may rotate rotateclockwise clockwise or or counterclockwise I swing counterclockwise by by adjusting adjusting the the stop stop washer washer intendedfor forIP65 IP65 enclosure I intended enclosure requirements requirements camssold sold separately separately (see (see pg. pg. 100) 100) I cams assembly includes: includes: I assembly mounting bracket bracket I mounting (2) mounting mounting screws screws I (2) stop washer washer I stop cam mounting mounting screw screw I cam foam seal seal I foam internal o-ring o-ring I internal (2) ringed ringed keys, keys, except for tool keys sold I (2) except for tool activated activated keys sold separately separately
key key locking locking
1.42 36.0 1.42[36.0]
.98 25.0 .98[25.0]
LENGTH LENGTH
1.97 50.0 1.97[50.0
.413 10.50 0.413[10.50] PADLOCK PADLOCK OPTION OPTION
90° 90° ROTATION ROTATION
90° 90° ROTATION ROTATION
5.91 150.0 5.91[150.0]
6.30 160.0 6.30[160.0]
<>
1.97 50.0 1.97[50.0]
.57 14.4
KEY KEY LOCKING LOCKING OPTION OPTION
98 98
Request Info
Download 31:Immo @ Download @www.spep.com www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
.44 11.1
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Hir es and Hinges and Industrial Industri -1 Hardware Hardware
Part Part Number Number
Description KeyCode/ Code/ Plug Plug Description Key
Length Length
Material Material
Finish Finish
key key locking locking
EK333 EK333
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
50M-751 50M-751
key key locking locking
CH751 CH751
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated black black housing, housing, black black powder powder coated coated handle handle
50M-333P01 50M-333P01
key key locking locking
EK333 EK333
.79 [20.0] [20.0] .79
polyamide polyamide housing, housing, die die cast cast zinc zinc handle handle
50M-751P01 50M-751P01
key key locking locking
CH751 CH751
.79 [20.0] [20.0] .79
polyamide polyamide housing, housing, die die cast cast zinc zinc handle handle
black black housing, housing, black black powder powder coated coated handle handle
50M-333P 50M-333P
key key locking locking
EK333 EK333
.79 [20.0] [20.0] .79
polyamide polyamide
black black
key key locking locking
CH751 CH751
.79 [20.0] [20.0] .79
polyamide polyamide
black black
50M-12 50M-12
tool activated tool activated
slotted plug plug slotted
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
50M-22 50M-22
tool activated tool activated
Bellcore Bellcore plug plug
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
50M-18 50M-18
tool activated tool activated
3mm 3mm double double bitted bitted plug plug
.79 [20.0] 79 [20.0]
die zinc die cast cast zinc
black black powder powder coated coated
50M-1801 50M-1801
tool activated tool activated
5mm 5mm double double bitted bitted plug plug
.79 [20.0] 79 [20.0]
die zinc die cast cast zinc
black black powder powder coated coated
50M-30 50M-30
tool activated tool activated
8mm triangle 8mm triangle
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
non-locking non-locking
none none
.79 [20.0] [20.0] .79
die zinc die cast cast zinc
black black powder powder coated coated
50M 50M
Medium Swing Swing Handles Medium Handles
DI
50M-333 50M-333
50M-751P 50M-751P
1
Latches
IP65 RATED
NEM
n tto
key key locking locking
swinghandle handlemay may rotate rotateclockwise clockwise or or counterclockwise counterclockwise by I swing by adjusting adjusting the the stop stop washer washer intendedfor forIP65 IP65 enclosure I intended enclosure requirements requirements camssold sold separately separately(see (see pg. pg. 100) 100) I cams assembly includes: includes: I assembly mounting bracket bracket I mounting (2) mounting mounting screws screws I (2) stop washer washer I stop cam mounting mounting screw screw I cam foam seal seal I foam internal o-ring o-ring I internal (2) ringed ringed keys, keys, except for tool keys sold I (2) except for tool activated activated keys sold separately separately
.98 25.0 .98[25.0]
.79 20.0 .79[20.0
1.42 36.0 1.42[36.0]
4.72 120.0 4.72[120.0]
4.33 110.0 4.33[110.0] <>
90° 90° ROTATION ROTATION
90° 90° ROTATION ROTATION
V MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Request Info
1-800-453-1692 www.aboveboardelectronics.com
KEY KEY LOCKING LOCKING OPTION OPTION
.36 9.1
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
99 99
Latches
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Cams Point Cams One Point One OFFSET IN IN
.75 19.0
STRAIGHT STRAIGHT CAM CAM
1.77 45.0
8.00 ARE VIEWS SIDE VIEWS SIDE
FRONT VIEWS
OFFSET IN
19.0 ] .75 .7 5[ 19.0
STRAIGHT CAM
/ GRIP GRIP
11.77 .77 [ 45.0 45.0 ]
4-u
.315 8.00 0.315[8.00] SQUARE SQUARE
SIDE VIEWS
VIEWS FRONT VIEWS FRONT
Part Part Number Number
Cam Cam Offset Offset
Grip Grip
Cam Cam Offset Offset
50C02 500O2
[4.0] .16 [4.0] .16
.629 [16.00] .629 [16.00] in in
50C28 50C28
1.18 1.18 [30.0] [30.0]
[10.00] out .393 393 [10.00] out
50C04 50004
[6.0] .24 [6.0] .24
[14.00] in .551 [14.00] .551 in
50C30 50C30
1.26 1.26 [32.0] [32.0]
.472 [12.00] .472 [12.00] out out
50C06 50006
[8.0] .31 [8.0] .31
[12.00] in .472 [12.00] .472 in
50C32 50C32
1.34 1.34 [34.0] [34.0]
.551 [14.00] .551 [14.00] out out
50C08 50008
.39 [10.0] .39 [10.0]
[10.00] in .393 393 [10.00] in
50C34 50C34
1.42 1.42 [36.0] [36.0]
.629 [16.00] .629 [16.00] out out
50C10 50C10
.47 [12.0] .47 [12.0]
[8.00] in .314 314 [8.00] in
50C35 50C35
1.46 1.46 [37.0] [37.0]
.669 [17.00] .669 [17.00] out out
50C13 50C13
.59 [15.0] .59 [15.0]
.196 .196 [5.00] [5.00] in in
50C36 50C36
1.50 1.50 [38.0] [38.0]
.708 [18.00] .708 [18.00] out out
50C14 50C14
.63 [16.0] .63 [16.0]
[4.00] in .157 [4.00] .157 in
50C38 50C38
1.57 1.57 [40.0] [40.0]
.787 [20.00] .787 [20.00] out out
50C16 50C16
[18.0] .71 [18.0] .71
[2.00] in .078 [2.00] .078 in
50C40 50C40
1.65 1.65 [42.0] [42.0]
.866 [22.00] .866 [22.00] out out
OFFSET 50C18 50C18 OUT
[20.0] .79 [20.0] .79
straight straight
50C42 50C42
1.73 1.73 [44.0] [44.0]
.944 [24.00] .944 [24.00] out out
.87 [22.0] .87 [22.0]
.078 .078 [2.00] [2.00] out out
50C44 50C44
1.81 1.81 [46.0] [46.0]
1.023 1.023 [26.00] [26.00] out out
50C22 50C22
.94 [24.0] .94 [24.0]
.157 .157 [4.00] [4.00] out out
50C45 50C45
1.85 1.85 [47.0] [47.0]
1.062 1.062 [27.00] [27.00] out out
50C24 50C24
1.02 1.02 [26.0] [26.0]
.236 [6.00] .236 [6.00] out out
50C47 50C47
1.93 1.93 [49.0] [49.0]
1.141 1.141 [29.00] [29.00] out out
50C25 50C25
1.06 1.06 [27.0] [27.0]
.275 [7.00] .275 [7.00] out out
50C50 50050
2.05 [52.0] 2.05 [52.0]
1.259 1.259 [32.00] [32.00] out out
50C26 50C26
1.10 1.10 [28.0] [28.0]
[8.00] out .314 314 [8.00] out
Part Part Number Number
OFFSET OFFSET OUT OUT
50C20 50C20
Grip Grip
zinc plated steel, zinc I steel, plated pages 98 on pages latches with for latches are for with .79 .79 [20.0] [20.0] body body length length on 98 & & 99 99 shownare gripsshown I grips for .71 (see body body length length table table below below for .71 [18.0] [18.0] latch latch length length (see Body Body Length Length
Correct Grip for Correct Subtract for to Subtract Dimension Dimension to Grip
.71 [18.0] .71 [18.0]
table .08 [2.0] cam table subtract .08 subtract [2.0] to to grips grips on on cam
.79 [20.0] .79 [20.0]
same same as as grips grips on on cam cam table table
[20.0] or .79 .71 18.0 or .71[18.0] .79[20.0) LENGTH BODY LENGTH BODY
•
Two Point Two Point Cam Cam
Part Number Part Number
50C00 50000
steel steel
zinc plated zinc plated
.157 4.00
1.42 36.0
.24 6.0 (2) PLACES
.24 6.0 0.24[6.0] (2) PLACES (2) PLACES
73 18.6
.73 18.6
I 14.0 ] .55 .55[ 14.0
.315 8.00 SQ.
Finish Finish
are supplied cam c-clips are supplied with with cam ► c-clips rods for rods 101 for page101 topage referto I refer
.157 4.00 ] .157[4.00
1.42 36.0
Material Material
.55 14.0
.315 8.00 SQ.
Cams Offset Cams Point Offset Three Point Three Part Part Number Number
(1) (1) cam cam
(2) rod (2) rod adapters adapters 1.42 36.0 1.42[366] CENT. 20.0 .79 .79[20.0] CAM OFFSET
.157 4.00 THK.
1.85 47.0 1.135[47.0]
100 100
www.spep.com Download Viloctsu @@www.spep.com Download
12C43 12C43
.79 [20.0] .79 [20.0]
straight straight
12C44 12C44
[24.0] .94 [24.0] .94
.157 [4.00] .157 [4.00] out out
12C45 12C45
1.10 1.10 [28.0] [28.0]
out [8.00] out .315 315 [8.00]
12C46 12C46
1.18 1.18 [28.0] [28.0]
[10.00] out .394 394 [10.00] out
12C47 12C47
1.26 1.26 [32.0] [32.0]
.472 [12.00] .472 [12.00] out out
12C48 12C48
1.34 1.34 [34.0] [34.0]
.551 [14.00] .551 [14.00] out out
12C40 12C40
1.42 1.42 [36.0] [36.0]
.630 [16.00] .630 [16.00] out out
12C41 12C41
1.57 1.57 [40.0] [40.0]
.787 [20.00] .787 [20.00] out out
12C42 12C42
1.65 1.65 [42.0] [42.0]
.866 [22.00] .866 [22.00] out out
zinc plated steel, zinc I steel, plated cast zinc die cast zinc rod rod adapter adapter (may (may be be / die separately as purchased purchased separately as part part no. no. C20) C20) cam c-clips are are supplied supplied with with cam ►c-clips latches on used with pages be used also be mayalso I may with latches on pages table) 82 -- 93 82 93 (see (seebody body length length table)
1.16 29.5 1.16[29.5]
+.13 +.005 .320 - .000 8.13 .00 SQ. 32e:88012.108] CENT..
Cam Cam Offset Offset
Grip Grip
.325 8.25 x 95.325[8.25]3c
.679 [17.25] DEEP
__ Request Info
1-800-453-1692 www.aboveboardelectronics.com
Body Body Length Length
Dimension to Dimension to Add Add for for Correct Correct Grip Grip
[17.5] .69 [17.51 .69
grips on subtract to grips on [2.5] to subtract .10 .10 [2.5] cam cam table table
[18.0] .71 [18.01 .71
grips on to grips subtract .08 [2.0] to on subtract .08 [2.0] cam cam table table
.75 [19.1] .75 [19.11
grips on subtract subtract .04 .04 [0.9] [0.9] to to grips on cam cam table table
[20.0] .79 .79 [20.01
same as as grips grips on on cam cam table table same
.88 [22.4] .88 [22.41
grips on [2.4] to .09 [2.4] add add .09 to grips on cam cam table table
achieve the to achieve table to thistable usethis I use the correct correct grip grip for for each each of of the the different different body body lengths lengths ►refer refer to to page page 101 101 for for rods rods
Hinges Hinges and and Industrial Industri-1 Hardware Hardware
747-43.3 747-43.3
Length Length
Material Material
Finish Finish
43.31 [1100.0] [1100.0] 43.31
steel steel
zinc plated zinc plated
LENGTH LENGTH .12 3.0 0.12[3.0]
customlengths lengthscan canbe bemade madeto toyour your specifications specifications I custom usedwith with die die cast cast zinc zinc rod I used rod adapter adapter (sold (sold separately, separately, part part no. no. C20) C20)
L
.315 8.00 0.315[8.00]
Latches
Connecting Rod Rod Connecting Part Part Number Number
.24 6.0 .24[6.0]
Connecting Rods Rods with with Plastic Plastic Wheels Connecting Wheels Part Part Number Number
Length Length
Material Material
Finish Finish
743-27 743-27
27.00 [685.8] 27.00 [685.8]
steel steel
zinc plated zinc plated
743-43.3 743-43.3
43.30 [1100.0] [1100.0] 43.30
steel steel
zinc plated zinc plated
743-47.25 743-47.25
47.25 [1200.2] [1200.2] 47.25
steel steel
zinc plated zinc plated
.591 15.00 0.591[15.00] (2) WHEELS (2) WHEELS
LENGTH LENGTH
r
[>[>
.311 7.90 0.311[7.90]
.07 1.8 .07] 1.8] OFFSET OFFSET
1.10 27.8 1.10[27.8]
customlengths lengthscan canbe bemade madeto toyour your specifications specifications I custom usedwith with die die cast cast zinc zinc rod I used rod adapter adapter (sold (sold separately, separately, part part no. no. C20) C20)
.21 5.4 .21[5.4
rte_) 2 1.16 4.0 [.16[4.0] TYP.
Connecting Rods Rods with with Plastic Plastic Wheels Wheels Perpendicular Perpendicular to toFlat Flat End End Connecting Length Length
Material Material
Finish Finish
744-15.8 744-15.8
Part Part Number Number
15.75 [400.0] [400.0] 15.75
steel steel
zinc plated zinc plated
744-19.7 744-19.7
19.69 [500.0] [500.0] 19.69
steel steel
zinc plated zinc plated
744-23.6 744-23.6
23.62 [600.0] 23.62 [600.0]
steel steel
zinc plated zinc plated
744-27.6 744-27.6
27.56 [700.0] 27.56 [700.0]
steel steel
zinc plated zinc plated
744-31.5 744-31.5
31.50 [800.0] [800.0] 31.50
steel steel
zinc plated zinc plated
744-35.4 744-35.4
35.43 [900.0] [900.0] 35.43
steel steel
zinc plated zinc plated
744-39.4 744-39.4
39.37 [1000.0] [1000.0] 39.37
steel steel
zinc plated zinc plated
744-43.3 744-43.3
43.30 [1100.0] [1100.0] 43.30
steel steel
zinc plated zinc plated
.591 15.00 0.591[15.00] (2) WHEELS WHEELS (2) .157 4.00 .157[4.00]
1
.311 7.90 0.311[7.90]
.14 3.5 .14[3.5] OFFSET OFFSET
1.48 37.5
.244 6.20 0.244[6.20]
LENGTH LENGTH .16 4.0 .16[4.0]
.50 12.77] 50[12
.21 5.4 .21[5.4]
J
I
TYP.
customlengths lengthscan canbe bemade madeto toyour your specifications specifications I custom
Connecting ConnectingRods Rods with withPlastic PlasticWheels WheelsIn-line In-line with withFlat Flat End End Part Part Number Number
Length Length
Material Material
Finish Finish
744A-15.8 744A-15.8
15.75 [400.0] [400.0] 15.75
steel steel
zinc plated zinc plated
744A-19.7 744A-19.7
19.69 [500.0] [500.0] 19.69
steel steel
zinc plated zinc plated
744A-23.6 744A-23.6
23.62 [600.0] 23.62 [600.0]
steel steel
zinc plated zinc plated
744A-27.6 744A-27.6
27.56 [700.0] 27.56 [700.0]
steel steel
zinc plated zinc plated
744A-31.5 744A-31.5
31.50 [800.0] [800.0] 31.50
steel steel
zinc plated zinc plated
744A-35.4 744A-35.4
35.43 [900.0] [900.0] 35.43
steel steel
zinc plated zinc plated
744A-39.4 744A-39.4
39.37 [1000.0] [1000.0] 39.37
steel steel
zinc plated zinc plated
744A-43.3 744A-43.3
43.30 [1100.0] [1100.0] 43.30
steel steel
zinc plated zinc plated
.244 6.20 0).244[6.20
LENGTH
.50 12.7 .14 3.5 1.48 37.5 1 -•-1.46[37.5]-•.157 4.00 157[400)
.311 7.90 0.311[7.90] .16 4.0 TYP.
custom custom lengths lengths can can be be made made to to your your specifications specifications
Rod Rod Guides Guides Part Part Number Number
Material Material
Finish Finish
A A
B
C
D
702-05 702-05
plastic plastic
black, black, smooth smooth
1.50 1.50 [38.1] [38.1]
.86 .86 [21.8] [21.8]
.96 .96 [24.4] [24.4]
.19 .19 [4.8] [4.8]
plastic plastic
black, black, smooth smooth
1.25 1.25 [31.8] [31.8]
.60 .60
.73 .73
.14 .14
[15.2] [15.2]
[18.5] [18.5]
[3.56] [3.56]
702-06 702-06
material: black black plastic plastic with I material: with steel, steel, zinc zincplated platedthreaded threaded inserts inserts
.77 19.5 .77[19.5]
1.06 27.0 01.06[27.0]
.394 10.00 0.394[10.00]
M6 THD. THD. 0M6 OPPOSITE OPPOSITE SIDE SIDE
.73 18.5 J3[ 18.5]
.55 13.9 55[13.9]
.41 10.4 .41[10.4] A C
B D
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order `a 800.433.5554
101
SIERRA Ful'IFIa"-VGINEERING AND PRODUCTS
Latches
Swing Handles with with Rod Rod Control Swing Handles Control System System
EW FRODUL,T
AMILY
Features Features
co
►Includes: Includes: swing handle ►swing handle ►rod rod control control system system with with steel, steel, zinc zinc plated plated rods rods ►installation installation screws screws ►(2) (2) ringed ringed keys keys flat washer ►flat washer split washer ►split washer
medium medium handle handle with round rod with round studs studs rod shown shown
See pg. ►See pg. 100 100 for for 3-point 3-point rod rod control control cams cams (only (only straight straight or or offset offset out out 50C 50C cams cams may may be be used) used)
0 round round studs studs
ROUND STUDS
square studs sqi
SQUARE STUDS
OJ through holes holes through THRU HOLES
Medium Rod Control Medium 2-Point 2-Point Rod Control System System Part Part Number Number
4.86 123.5
5.37 136.5
1.10 28.0 1.10[28.0]
5.04 128.0 5.04[ 28.01
5.24 133.0
Key Key Code Code // Plug Plug
Rod Rod Control Control Type Type
Latch Latch Material Material
Latch Latch Finish Finish
55M-751 55M-751
CH751 CH751
round round studs studs
die cast cast zinc zinc die
black black powder powder coated coated
55M-333 55M-333
333 333
round round studs studs
die cast cast zinc zinc die
black black powder powder coated coated
55M-7515 55M-7515
CH751 CH751
through holes holes through
die cast cast zinc zinc die
black black powder powder coated coated
55M-3335 55M-3335
333 333
through holes holes through
die cast cast zinc zinc die
black black powder powder coated coated
6.30 160.0
Medium Rod Control Control System with Cam Cam Adapters Medium 3-point 3-point Rod System with Adapters 8.80 223.5
8.33 211.5
Part Part Number Number
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Rod Rod Control Control Type Type
Latch Latch Material Material
Latch Latch Finish Finish
56M-751 56M-751
CH751 CH751
round round studs studs
die cast cast zinc zinc die
black black powder powder coated coated
56M-333 56M-333
333 333
round round studs studs
die cast cast zinc zinc die
black black powder powder coated coated
56M-7515 56M-7515
CH751 CH751
through holes holes through
die cast cast zinc zinc die
black black powder powder coated coated
56M-3335 56M-3335
333 333
through holes holes through
die cast cast zinc zinc die
black black powder powder coated coated
1.42 36.0
1.42 36.0 MEDIUM SWING SWING HANDLE HANDLE MEDIUM
4.86 123.5
.98 [25.0] 25.0 .98
160.0 ] 6.30 160.0 6.30[
Large Rod Control Large 2-point 2-point Rod Control System System
LARGE SWING HANDLE
Part Part Number Number
5.37 136.5
Key Key Code Code // Plug Plug
Key Key Code Code // Plug Plug
Rod Rod Control Control Type Type
Latch Latch Material Material
Latch Latch Finish Finish
55L-751 55L-751
CH751 CH751
round round studs studs
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
55L-333 55L-333
333 333
round round studs studs
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
55L-7511 55L-7511
CH751 CH751
square studs square studs
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
55L-3331 55L-3331
333 333
square studs square studs
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
55L-7515 55L-7515
CH751 CH751
through through holes holes
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
55L-3335 55L-3335
333 333
through through holes holes
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
5.91 [150.0 5.91 50.0]
Large Rod Control Cam Adapters Large 3-point 3-point Rod Control System System with with Cam Adapters 8.33 211.5
8.80 223.5
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
1.42 36.0
HANDLE
Part Part Number Number
Key Key Code Code // Plug Plug
Rod Rod Control Control Type Type
Latch Latch Material Material
Latch Latch Finish Finish
56L-751 56L-751
CH751 CH751
round round studs studs
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
56L-333 56L-333
333 333
round round studs studs
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
56L-7511 56L-7511
CH751 CH751
square studs square studs
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
56L-3331 56L-3331
333 333
square studs square studs
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
56L-7515 56L-7515
CH751 CH751
through through holes holes
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
56L-3335 56L-3335
333 333
through through holes holes
black black polyamide polyamide housing housing die die cast cast zinc zinc handle handle
black black housing housing black black powder powder coated coated handle handle
LARGE SWING LARGE SWING HANDLE HANDLE
Request Info
102 102
1-800-453-1692 www.aboveboardelectronics.com
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Hinges and Hinges and Industrial Industrial Hardware Hardware
Length Length
Material Material
Finish Finish
748-7.8 748-7.8
7.87 [200.0] 7.87 [200.0]
steel steel
zinc plated zinc plated
748-23.6 748-23.6
23.62 [600.0] 23.62 [600.0]
steel steel
zinc plated zinc plated
748-31.5 748-31.5
31.50 31.50 [800.0] [800.0]
steel steel
zinc plated zinc plated
748-47.2 748-47.2
47.24 [1200.0] 47.24 [1200.0]
steel steel
zinc plated zinc plated
brass studs studs I brass foruse use with withround roundor or through through hole hole type type rod rod controls controls I for
Latches
Flat Connecting Connecting Rods Rods Flat Part Part Number Number
LENGTH .20 5.0 TYP.
.55 14.0 .55[14.0]
.240 6.10 0.240[6.10] (11) HOLES
.315 8.00 0.315[8.00] (2) STUDS
2.95 75.0 2.95[75.0]
.39 10.0] 10.0 --•-.39[
5.14 130.5 5.14[130.5] .67 17.0 .67[176]
.118 3.00 .118[3.00]-
Flat Connecting Rod with Flat Connecting Rod with Wheels Wheels Part Part Number Number
746-43.3 746-43.3
Material Material
Finish Finish
steel steel
zinc plated zinc plated
customlengths lengthscan canbe be made made to to your your specifications specifications I custom foruse usewith withsquare square stud stud rod I for rod control control
.118 3.00 .118[3.00]
Li6[4.0] .16 4.0
43.90 1115.0 1115.01_v, 43.90] REF.
2.28 58.0
.591 15.00
.244 6.20 SQ. 1.12 28.5 .55 14.0
.59 15.0
43.31±.12 1100.0±3.0
Rod Guide Rod Guide & & Rod Rod Keeper Keeper Rod Guide Rod Guide Part Part Number Number
702-07 702-07
Material Material
Finish Finish
plastic plastic
black, black, smooth smooth
.354[9.00] [9.00] OBROUND OBROUND WITH WITH .276 7.00 xx.354 .276[7.00] .354 [9.00] [9.00] xx .433 .354 .433 [11.00] [11.00] xx .12 .12 [3.0] [3.0] DEEP DEEP C'BORE CSORE OPPOSITE SIDE
usedon onconnecting connectingrods rods on on the the top top of of this this page page I used
.31 8.0 .31[8.0]
TOP VIEW VIEW .13 3.3 .13[3.3]
A Aft
.55 14.0 .55[14.0] .31 8.0 .31[8.0] A Af
rod guide rod guide
.87 22.0 h•-.87[22.01-.•
1.02 26.0 1.02[26.01H
FRONT VIEW
SECTION A-A
Rod Keeper Rod Keeper Part Part Number Number
702-10 702-10
Material Material
Finish Finish
die cast zinc die cast zinc
black black powder powder coated coated
1.57 40.0 1.57[40.0] A
A
usedon onconnecting connectingrods rods on on the the top top of of this this page page I used
1.04 26.5 1.04[26.5]
Ø.256 6.50 HOLE HOLE WITH WITH 0.256[6.50] Ø.4882 [12.400] [12.400] xx 90° 90° C'SINK C'SINK 0.4882 (2) PLACES PLACES (2)
.98 25.0 98[25.0]
1.02 26.0
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.28 7.0 .28[7.0]
.33 8.5 .33[8.5]
.87 22.0 .87[22.0]
.16 4.0 0]i 16[4
.30 7.5 30[7.5]
TOP VIEW TOP VIEW
.63 63[ 15.9 15.9]
rod keeper keeper rod
SECTION A-A A-A
To Place 800.433.5554 1111
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
103
Latches
SIERRA PACIFIC ENGINEERING AND PRODUCTS
NEMA 11 Enclosure Enclosure Latch NEMA Latch Part Number Part Number .64 16.3
15 15
co
.20 5.0 .20[5.0] OFFSET
.98 24.9
2.37 60.2
Material Material
Finish Finish
steel steel
yellow zinc zinc plated yellow plated
► same same double double D D cut-out cut-outas as most most cam cam locks locks flush or or recessed recessed mounting ► flush mounting and flat flat washer washer are are clear ►spring spring and clear zinc zinc plated plated by screwdriver screwdriver or ►operated operated by or coin coin assembled ►shipped shipped assembled
.75 19.1
Hex Turn Hex Turn Latch Latch Part Number Part Number 1.63 41.3
cb .798 20.27 .798[20.27]
17 17 .63 15.9
Material Material
Finish Finish
steel steel
zinc plated zinc plated
includes: ►includes: hex bolt latch retainer, retainer, zinc ►hex bolt latch zinc plated plated push-on nut, nut, black black oxide ►push-on oxide reverse style cam, zinc ►reverse style single single point point cam, zinc plated plated
.312 7.92 SQ. SQ. .312[7.92]
1.63 41.3 1.63[41.3] SHAFT SHAFT LENGTH LENGTH
Stainless Screwdriver Turn Turn Latch Stainless Steel Steel 1.00" 1.00r Screwdriver Latch Part Number Part Number 1.31 33.3
.50 12.8
10SS 1065
Material Material
Finish Finish
304SS 304SS
tumbled tumbled
includes: ►includes: slotted 304SS 304SS bolt ►slotted bolt with with arrow arrow pointer pointer steel push-on clear zinc ►steel push-on nut, nut, clear zinc plated plated ►single single point steel cam, cam, zinc point steel zinc plated plated
.180 4.58 SQ. SQ. .180[4.58]
1.00 25.4 1.00[25.4] SHAFT LENGTH
Steel Screwdriver Turn Turn Latches Latches Steel Screwdriver .50 12.7
Part Part Number Number
GRIP
Shaft Shaft Length Length
Max. Grip Max. Grip
1.00 [25.4] [25.4] 1.00
0.50 [12.7] 0.50 [12.7]
10ZN-01 10ZN-01
2.75 [69.9] 2.75 [69.9]
2.25 2.25 [57.2] [57.2]
10ZN-03 10ZN-03
1.25 [31.8] [31.8] 1.25
0.75 [19.1] 0.75 [19.1]
10ZN-04 10ZN-04
1.50 [38.1] [38.1] 1.50
1.00 [25.4] 1.00 [25.4]
10ZN-05 10ZN-05
1.75 [44 [44.5] 1.75 .5]
1.25 1.25 [31.8] [31.8]
10ZN-06 10ZN-06
2.00 [50.8] 2.00 [50.8]
1.50 1.50 [38.1] [38.1]
10ZN-07 10ZN-07
2.25 [57.2] 2.25 [57.2]
1.75 1.75 [44.5] [44.5]
10ZN 10ZN 1.31 33.3 .181 4.59 SQ.
.49 12.5
.15 3.7
FRONT VIEW FRONT VIEW
Flat Washer Flat Washer ►material: material: steel steel finish: zinc ►finish: zinc plated plated
104 104
RIGHT SIDE SIDE VIEW RIGHT VIEW
.020 .50 .020[.50] THK. Jr THK.
part no. part no. 363 363
.689 17.50 0.689[17.50]
Download www.spep.com Download 3DmoDEts @ @ www.spep.com
SHAFT SHAFT LENGTH LENGTH
.256 6.50 0.256[6.50]
Cup Washer Cup Washer part no. part no. 363N 363N
material: plastic ►material: plastic finish: white ►finish: white
.026 .65 .026[.65] THK. THK.
.256 6.50 0.256[6.50]
.540 13.72 0.540[13.72]
►material: material: steel steel finish: bright nickel plated ►bolt bolt finish: bright nickel plated includes: ►includes: slotted bolt arrow pointer ►slotted bolt with with arrow pointer steel push-on clear zinc ►steel push-on nut, nut, clear zinc plated plated ►single single point steel cam, cam, zinc point steel zinc plated plated
.07 1.9 .07[1.9] DEEP DEEP
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Industrial I-frrdware Hardware Hinges and ind Industrial
Shaft Shaft Length Length
Max Grip Max Grip
12ZN 12ZN
1.50 [38.1] [38.1] 1.50
1.00 [25.40] [25.40] 1.00
12ZN-01 12ZN-01
1.75 [44.5] [44.5] 1.75
1.25 [31.8] [31.8] 1.25
12ZN-02 12ZN-02
2.25 [57.2] 2.25 [57.2]
1.75 [44.5] [44.5] 1.75
Latches
Steel L-Handle Turn Turn Latches Steel L-Handle Latches Part Part Number Number
DI
ffp
n
.50 12.7
GRIP
CD
1.32 33.5
►material: material: steel steel ►handle handle finish: finish: bright bright nickel nickel plated plated includes: ►includes: ►handle handle bolt bolt nut, clear clear zinc zinc plated ►push-on push-on nut, plated single point cam, clear clear zinc ►single point cam, zinc plated plated trim washer, ►trim washer, bright bright nickel nickel plated plated
.181 4.59 SQ. SQ. 181 [4.59]
.28 7.1 .28 [7.1]
.64 [18.3] 16.3
FRONT FRONT VIEW
. ‘_41 , ra,
SHAFT LENGTH LENGTH SHAFT
RIGHT VIEW RIGHT SIDE SIDE VIEW
Plastic Knob Handle Handle Turn Turn Latches Plastic Knob Latches Part Part Number Number
Shaft Shaft Length Length
Max Grip Max Grip
13ZN 13ZN
1.00 [25.4] [25.4] 1.00
0.50 [12.7] [12.7] 0.50
13ZN-01 13ZN-01
1.50 [38.1] [38.1] 1.50
1.00 [25.4] [25.4] 1.00
13ZN-02 13ZN-02
2.25 [57.2] 2.25 [57.2]
1.75 [44.5] [44.5] 1.75
.50 12.7
►material: material: steel steel with with plastic plastic knob knob shaft finish: finish: bright ►shaft bright nickel nickel plated plated includes: ►includes: ►knob knob bolt bolt steel push-on push-on nut, nut, clear clear zinc zinc plated ►steel plated single point cam, clear clear zinc ►single point cam, zinc plated plated
GRIP
1.32 33.4
.181 4.59 SQ.
.96 24.3
.75 [1 19.1 .75 9.1
FRONT VIEW FRONT VIEW
SHAFT LENGTH LENGTH SHAFT RIGHT VIEW RIGHT SIDE SIDE VIEW
Flush-mount Spring Loaded Loaded Latch Latch for Flush-mount Spring for Access Access Panel Panel Part Part Number Number
2196 2196
Material Material
Finish Finish
304SS 304SS
tumbled tumbled 2.66 67.6 2.66[67.6]
closed closed position position 1.88 47.8 1.88[47.8]
1.38 35.1 1.38[35.1]
4.19 0 .165 .165[4.19]
.25 6.4 .25[6.4
(4) HOLES (4) HOLES
1.12 28.4 1.12[28.4
mid-way mid-way position position .125 .125[ 3.17 3.17]
.060 1.52 I .o6o[1.52]
•
T
open position open position
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
105 105
Latches
SIEP"1 PACIFIC ENGINEERING AND PROP"" --Small Small Compression Compression Spring Spring Panel Panel Latches Latches Slotted Head Head Slotted Part Part Number Number
Mounting Mounting
Base & Head Base & Head Material Material
Spring Spring
Finish Finish
Grip Grip
11-00ZN 11-00ZN
holes holes
steel steel
smooth smooth
blue blue zinc zinc plated plated
.05 [1.3] - .25[6.4] [6.4] max. .05 [13] min. min.-.25 max.
11-02CO 11-02C0
weld guides weld guides
steel steel
smooth smooth
copper copper plated plated
.05 [1.3] - .25[6.4] [6.4] max. .05 [13] min. min.-.25 max.
Ø.380 [Ø9.65]
Knurled Knurled Head Head Mounting Mounting
Base & Head Base & Head Material Material
Spring Spring
Finish Finish
Grip Grip
11-04ZN 11-04ZN
Part Part Number Number
holes holes
steel steel
smooth smooth
blue blue zinc zinc plated plated
.05 [1.3] - .25[6.4] [6.4] max. .05 [13] min. min.-.25 max.
11-06CO 11-06C0
weld guides weld guides
steel steel
smooth smooth
copper copper plated plated
.05 [1.3] - .25[6.4] [6.4] max. .05 [13] min. min.-.25 max.
Ø.380 [Ø9.65]
Black Black Knob Knob Head Head Mounting Mounting
Base & Head Base & Head Material Material
Spring Spring
Finish Finish
Grip Grip
11-08ZN 11-08ZN
Part Part Number Number
holes holes
steel steel
smooth smooth
blue blue zinc zinc plated plated
.05 [1.3] - .25[6.4] [6.4] max. .05 [13] min. min.-.25 max.
11-09CO 11-09C0
weld guides weld guides
steel steel
smooth smooth
copper copper plated plated
.05 [1.3] - .25[6.4] [6.4] max. .05 [13] min. min.-.25 max.
all small small compression compression spring spring latches latches feature feature 304SS 304SS electropolished wire I all electropolished wire
Ø.370 [9.40] [9.40] stud 0370 stud
.015 [28] [.38] LARGER LARGER .015 THAN THE THAN THE SHOWN SHOWN HEAD HEAD DIAMETERS DIAMETERS
1.05 26.6
.44 11.3 .44 [11.3]
FASTENER FASTENER
.035 .90 .035[.90]
"
WELD GUIDE WELD GUIDE (2) (2) PLACES PLACES
.42 10.6
011'13 OR
1.31 33.3
II
1.56 [39.7] 39.7 1.56
.58 14.8 .58[14.8] INSTALL INSTALL LATCH LATCH FROM THE BACK BACK FROM THE
SAME HOLE SAME HOLE SIZE SIZE AS LATCH HOLE HOLE AS LATCH
mounting dimensions mounting emensions latch panel as as shown latch mounts mounts from from behind behind the the panel shown
WELD GUIDES WELD GUIDES
HOLES HOLES
Medium Spring Panel Medium Compression Compression Spring Panel Latches Latches Slotted Head Head Slotted serrated spring spring serrated
Part Part Number Number
Ø.469 [011.91] [Ø11.91] 0.469
Mounting Mounting
Base & Head Base & Head Material Material
11-10ZN 11-10ZN
holes holes
11-10ZN50 11-10ZN50
holes holes
11-10SS 11-1055 11-15CO 11-15C0 11-15CO50 agt) 11-15C050
Spring Spring
Finish Finish
Grip Grip
steel steel
smooth smooth
blue blue zinc zinc plated plated
.06 [1.5] - .38[9.7] [9.7] max. .06 [1.5]min. min.-38 max.
steel steel
serrated serrated
blue blue zinc zinc plated plated
.06 [1.5] - .38[9.7] [9.7] max. .06 [1.5]min. min.-38 max.
holes holes
304SS 304SS
smooth smooth
electropolished electropolished
.06 [1.5] - .38[9.7] [9.7] max. .06 [1.5]min. min.-38 max.
weld guides weld guides
steel steel
smooth smooth
copper copper plated plated
.06 [1.5] - .38[9.7] [9.7] max. .06 [1.5]min. min.-38 max.
weld guides weld guides
steel steel
serrated serrated
copper copper plated plated
.06 [1.5] - .38[9.7] [9.7] max. .06 [1.5]min. min.-38 max.
11-15SS 11-1555
weld guides weld guides
304SS 304SS
smooth smooth
electropolished electropolished
.06 [1.5] - .38[9.7] [9.7] max. .06 [1.5]min. min.-38 max.
11-16CO 11-16C0
none none
steel steel
smooth smooth
copper copper plated plated
.06 [1.5] - .38[9.7] [9.7] max. .06 [1.5]min. min.-38 max.
11-16SS 11-1655
none none
304SS 304SS
smooth smooth
electropolished electropolished
.06 [1.5] - .38[9.7] [9.7] max. .06 [1.5]min. min.-38 max.
11-20ZN 11-20ZN
holes holes
steel steel
smooth smooth
blue .25[6.4] [6.4]min.-.56 min. - .56[14.2] [14.2] max. max. blue zinc zincplated plated .25
Knurled Head with withT-Bar T-Bar Knurled Head
Ø.539 [Ø13.69]
Mounting Mounting
Base & Head Base & Head Material Material
Spring Spring
Finish Finish
Grip Grip
11-30ZN 11-30ZN
Part Part Number Number
holes holes
steel steel
smooth smooth
blue blue zinc zinc plated plated
.06 [1.5] [9.7] max. .06 [1.5] min. min.-- .38 38 [9.7] max.
11-30ZN50 11-30ZN50
holes holes
steel steel
serrated serrated
blue blue zinc zinc plated plated
.06 [1.5] [9.7] max. .06 [1.5] min. min.-- .38 38 [9.7] max.
all medium mediumcompression compressionspring springlatches latchesfeature feature304SS 304SS electropolished wire I all electropolished wire .69 17.5 .69 [17.5] .05 1.2 .05[1.2]
b-
WELD GUIDE WELD GUIDE (2) (2) PLACES PLACES
1.52 [38.6] 1 52 [38.6]
.88 [22.2] 22.2 .62 [15.8] 15.8 .62
OR OR
2.31 [58.7] 58.7 2.31
OR OR
1.94 49.2 1.94 [49.2]
.76 19.2
[1.5]MIN. MIN. 01P .06.06 [1.51 GRIP 1. .38 [9.71 .38 [9.7] MAX. MAX.
106 106
Request Info
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1-800-453-1692 www.aboveboardelectronics.com
[6.4]MAX. MAX. GRIP .25 2 5 [6.4] GRIP .56 [14.2] MIN. MIN. .56 [14.2]
.138 3.50] 3.50 THRU THRU 0.138 (2) HOLES (2 HOLES HOLES
WELD GUIDES WELD GUIDES
Hinges Hinges and and Industrial industrial Hardware Hardware
Part Part Number Number
Mounting Mounting
Base & Head Base & Head Material Material
Spring Spring
Finish Finish
Grip Grip
11-40ZN 11-40ZN
holes holes
11-40ZN50 11-40ZN50
holes holes
steel steel
smooth smooth
blue zinc plated blue zinc plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
steel steel
serrated serrated
blue zinc plated blue zinc plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-40SS 11-4055 11-45CO 11-45C0
holes holes
304SS 304SS
smooth smooth
electropolished electropolished
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
weld weld guides guides
steel steel
smooth smooth
copper plated copper plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-45CO50 11-45C050
weld weld guides guides
steel steel
serrated serrated
copper plated copper plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-45SS 11-4555
weld weld guides guides
304SS 304SS
smooth smooth
electropolished electropolished
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-23ZN 11-23ZN
holes holes
steel steel
smooth smooth
blue zinc plated blue zinc plated
.25 [6.4] - .56 [14.2] [14.2] max. max. .25 [6.4] min. min.-.56
Mounting Mounting
Base & Head Base & Head Material Material
Spring Spring
holes holes
304SS* 304SS*
Latches
Medium Spring Panel Medium Compression Compression Spring Panel Latches Latches Knurled Knurled Head Head
Ø.539 [013.69] [Ø13.69] 0539
see previous previous page page for I see for mounting mounting dims dims
7/16" 7/16" Hex Hex Bolt Bolt Head Head Part Part Number Number
11-70SS 11-7055
Finish Finish
Grip Grip
electropolished electropolished
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
is made ► NOTE: NOTE:*body *body is made of of steel steel material material
seeprevious previous page page for dims I see for mounting mounting dims
Ø.776 [Ø19.71] 0.776 [019.71]
4mm Recessed Recessed Hex Hex Socket Head 4mm Socket Head Part Mounting Base Base & HeadMaterial Material PartNumber Number Mounting & Head
Spring Spring
Finish Finish
Grip Grip
11-90ZN 11-90ZN
holes holes
steel steel
smooth smooth
blue zinc plated blue zinc plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-90ZN50 11-90ZN50
holes holes
steel steel
serrated serrated
blue zinc plated blue zinc plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-90SS 11-9055
holes holes
304SS 304SS
smooth smooth
electropolished electropolished
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-95CO 11-95C0
weld weld guides guides
steel steel
smooth smooth
copper plated copper plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
weld weld guides guides
steel steel
serrated serrated
copper plated copper plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-95CO50 1ir011-95C050
Ø.469 [Ø11.91]
see previous previous page page for I see for mounting mounting dims dims
Black Black Knob Knob Head Head Part Mounting Base Base & HeadMaterial Material PartNumber Number Mounting & Head
Spring Spring
Finish Finish
Grip Grip
11-55ZN 11-55ZN
steel steel
smooth smooth
blue zinc plated blue zinc plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
holes holes
11-55ZN50 11-55ZN50
holes holes
steel steel
serrated serrated
blue zinc plated blue zinc plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-50CO 11-5000
weld weld guides guides
steel steel
smooth smooth
copper plated copper plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
11-50CO50 11-500050
weld weld guides guides
steel steel
serrated serrated
copper plated copper plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
holes holes
steel steel
smooth smooth
11-25ZN 11-25ZN
Ø.563 [1430] [14.30] stud stud 0563
blue .25[6.4] [6.4]min.-.56 min. - .56[14.2] [14.2] max. max. blue zinc zincplated plated .25
see previous previous page page for I see for mounting mounting dims dims
T-40 Recessed T-40 Recessed Torx Torx Socket Socket Head Head Part Mounting Base Base & HeadMaterial Material PartNumber Number Mounting & Head
Spring Spring
Finish Finish
Grip Grip
11-97ZN 11-97ZN
smooth smooth
blue zinc plated blue zinc plated
.06 [1.5] - .38[9.7] [9.7] max. max. .06 [1.5]min. min.-38
none none
steel steel
see previous previous page page for I see for mounting mounting dims dims
Ø.469 [Ø11.91] 0.469 [011.91]
Medium Adjustable Grip Grip Medium Panel Panel Latches Latches with with Adjustable Part Part Description Number Description Number
32ZN 32ZN
offset in offset in
OFFSET OUT OUT OFFSET CAM GRIP CAM GRIP
Grip Grip
STRAIGHT CAM GRIP GRIP OFFSET IN CAM GRIP GRIP
.13 [3.3] - .38 [9.7] [9.7] max. max. .13 [3.3] min. min.-.38
32ZN-01 32ZN-01
straight straight
.38 [9.7] - .75 [19.1] [19.1] max. max. .38 [9.7] min. min.-.75
32ZN-02 32ZN-02
offset out offset out
.75 [19.1] 1.13 [28.7] [28.7] max. .75 [19.1] min. min.-- 1.13 max.
material: steel steel I material:
finish:zinc zinc plated plated I finish:
n p
1.25 31.8 125[31.8]
.205 5.20 0.205[5.201 (2) HOLES
.157 4.0 .157[4.0] .98 25.0 .98[25J0] .57 14.4 0.57[14.4]
.043 1.10 .043[1.10
1.08 27.5 1.08[27.5]
.87 22.2 .87[222]
.44 11.1 44[11.1]
.94 24.0 94[24.0]
1-- I-1.76[44314-T 1.75 44.5 FRONT VIEW FRONT IEW
LEFT SIDE VIEW LEFT SIDE VIEW
Large Grip Large Panel Panel Latches Latches with with Adjustable Adjustable Grip Part Part Description Number Description Number
Grip Grip
31ZN 31ZN
offset in offset in
.13 [3.3] - .38 [9.7] [9.7] max. max. .13 [3.3] min. min.-.38
31ZN-01 31ZN-01
straight straight
.38 [9.7] - 1.25 [31.8] [31.8] max. max. .38 [9.7] min. min.-1.25
31ZN-02 31ZN-02
offset out offset out
.88 [22.4] - 1.69 [42.9] [42.9] max. max. .88 [22.4] min. min.-1.69
material: steel steel I material:
OFFSET OUT CAM GRIP GRIP CAM STRAIGHT CAM GRIP GRIP CAM
4.83 .190 [4.83] .190
22.35 .880 [22.35] 0.880 .257 [8.531 6.53 0.257 (2) HOLES HOLES (2)
.063 1.60
1.34 34.0 1.34[34.0]
.63 [18.01 16.0 .63
1.53 38.9 SIDE VIEW LEFT SIDE VIEW
1-800-453-1692 www.aboveboardelectronics.com
J
.09 2.3
finish:zinc zinc plated plated I finish:
Request Info
1.88 47.8 1.88[47.8]
OFFSET IN CAM GRIP GRIP CAM
.50 12.7
O
0
1.25 [31.81 31.8 1.31 [33.4] 33.4 1.25
2.50 63.5 2.50[83.5] FRONT VIEW FRONT11IEW
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order: ta 800.433.5554
107
Latches
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Compression Over-Center Lever Latches Latches Compression Over-Center Lever
31655
Part Number Part Number
60V
Material Material
Finish Finish
Key Key Code Code
173 173
die black powder non-locking die cast castzinc zinc black powdercoated coated non-locking
173LK 173LK
die blackpowder powder coated coated die cast castzinc zinc black
173LK-751 173LK-751
die blackpowder powder coated coated die cast castzinc zinc black
173CH 173CH
die cast zinc die cast zinc
chrome chrome plated plated
173CH-LK 173CH-LK
die cast zinc die cast zinc
chrome chrome plated plated
K03 K03
173SST 17355T
316SS 316SS
brushed brushed
non-locking non-locking
173SST-CH751 17355T-CH751
316SS 316SS
brushed brushed
CH751 CH751
K03 K03 CH751 CH751 non-locking non-locking
includes keeper keeper and and keys keys (for versions) ► includes (for locking locking versions) [9.7] stable stable compression ► .38 38 [9.7] compression for for sealed sealed door door latching latching [7.9] unlatching unlatching feature feature for for opening opening jammed jammed sealed sealed doors ► .31 31 [7.9] doors
.87 [22.0] 22.0 .87
1.30 [33.0] 33.0 1.30
1.00 [25.4] 25.4 1.00 TYP. TYP. .37 [9.5] 9.5 .37
.87 .87 22.0 [2.0] 1.00 [25.4] 25.4 1.00 .37 [9.5] 9.5 .37 1.00 [25.4] 25.4 1.00
2.05 52.0
6.12 6.12 [155.4] 155.4 5.00 127.0 5.00 [127.0]
OPTIONAL OPTIONAL LOCK LOCK
1.24 [31.5] 31.5 1.24
.71 [18.0] 18.0 .71
FRONT VIEW FRONT VIEW
M5 THREAD THREAD M5 (6) PLACES PLACES (6)
1.30 [33.0] 33.0 1.30
RIGHT VIEW RIGHT SIDE SIDE VIEW
REAR VIEW REAR VIEW
Panel Fastening Fastening Concealed Concealed Draw Latches Panel Draw Latches Part Number Part Number
Description Description
Material Material
Finish Finish
1130-L 1130-L
latch latch
steel steel
zinc plated zinc plated
1130-S 1130-5
keeper keeper
steel steel
zinc plated zinc plated
for drawing panels together ► for drawing panels together gasket compression ► provides provides good good gasket compression force ► strong strong closing closing pressure pressurewith with minimal minimal operating operating force 5.88 149.4 5.88[149.4]
1130-S 1130-5 .63 16.0 .63] 16.0]
5.00 127.0 5.00[127.0] CENT.
HOLE WITH WITH .205 5.21 HOLE 0.205[5.21] .310 [7.87] [7.87] xx 82° 82 C'SINK 0.310 (2) PLACES
TOP VIEW TOP VIEW
3.75 95.3 CENT.
1130-L 1130-L 1.7 42.6
1.25 31.8
8MM HEX DRIVE FRONT VIEW FRONT VIEW
108 108
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges and Industrial Industrial Hf-rdware
Description Description
Color Color
Stock Stock
locking locking latch latch
black black
yes yes
locking locking latch latch with 304SS 304SS pull with pull
black black
yes yes
1176 1176
non-locking non-locking latch latch
black black
yes yes
1177 1177
dummy latch dummy latch
black black
yes yes
1175 1175 1175SS 117555
El
latches include: include: I latches thermoplasticbody bodywith withUV UV stabilizers stabilizers I thermoplastic thermoplasticbody bodywasher washerwith withUV UV stabilizers stabilizers I thermoplastic thermoplasticbody bodynut nutwith withUV UV stabilizers stabilizers I thermoplastic (2) stainless stainless steel I (2) steel hex hex nuts nuts (2) stainless stainless steel I (2) steel internal internal tooth tooth washers washers locking latch latch features features stainless stainless steel steel lock lock I locking plugwith with dust dust shutter shutterand andone onekey key per per latch latch I plug water resistant resistant I water stainless steel steel shaft shaft I stainless camsare are sold sold separately, separately, see I cams see below below
Flush-Mount Flush-Mount Latches Latches
Latches
Part Part Number Number
2.380 60.45 (42.380[60.45]
Locking Latch Locking Latch part part no. no. 1175SS 117555
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Locking Latch Locking Latch part 1175 no.1175 part no. 3.40 86.4 3.40[86.4] 1.44 36.5 1.44[36.5] .25 6.4 .25[6.4] A
.313 7.94 0.313[7.94]
2.34 59.5 02.34[59.5]
2.85 72.4 02.85[72.4] A
Dummy Latch Dummy Latch
80° MAX.
part no. 1177 1177 part no. dummy series has dummy series has no no shaft shaft
SECTION A-A SECTION A-A
Flush-Mount Cams Flush-Mount Latches Latches Cams Part Part Description Material Material Number Description Number
Finish Finish
D325 D325
straight straight
die yellow zinc zinc die cast castzinc zinc yellow
D326 D326
offset offset
die cast yellow zinc zinc die castzinc zinc yellow
usedwith with latches latches shown shown above I used above
.55 14.0 .55[ 14.0]
.44 11.0
.55 14.0 .55[14.0]
3.00 76.2 3.00[76.2]
.44 11.0 .44[11.9]-
J D325 D325
D326 D326
.30 7.5 .30[7.5] 2.00 50.8 2.00[50.8]
.323 8.20 x x 0.323[8.20] .26 [6.6] WIDTH WIDTH .26 [6.6]
.323 8.19 x x 0.323[8.19] .26 [6.6] WIDTH WIDTH .26 [6.6]
.66 16.7 0.66[16.7]
.38 9.5 .38[9.5]-
part part number: number: D325 D325
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.30 33.0 1.30[33.0]
.57 14.5 .57[14.5]
.66 16.7 0.66[16.7]
part part number: number: D326 D326
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
109 109
Latches
SIERRA PACIFIC ENGINEERING AND PROD
Raised Raised Trigger Trigger Compression Compression Latches Latches LEVER LENGTH LENGTH LEVER GRIP GRIP RANGE RANGE
.50 12.7 R.48 12.1
.64 16.3
LEVER LEVER
JAM NUT JAM NUT ADJUSTMENT ADJUSTMENT SCREW SCREW
LOCKING LOCKING OPTION OPTION
3.66 93.0
1.62 41.2
<
.90 22.9
OPENED OPENED POSITION POSITION METAL FRAME FRAME METAL MOUNTING MOUNTING BRACKET BRACKET
HOUSING HOUSING
RAISED RAISED TRIGGER TRIGGER
DOOR THICKNESS THICKNESS DOOR .04 [1.0] [1.0] MIN. MIN. TO .04 TO .20 .20 [5.1] [5.1] MAX. MAX. ZINC PLATED PLATED FINISH FINISH ZINC
.87 22.1 .87[22.1]
1.40 35.6
OR OR RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW
1.50 38.1 .20 5.1 MIN. MIN. .20[5.1] .43 [10.9] [10.9] MAX. MAX. .43
FRAME FRAME
3.80 96.5
3.38±.04 86.0±1.0 3.38±.04[86.0±1.0]
R.12 [3.0] 3.0 MAX. MAX. R.12 TYP. TYP.
DOOR
re O O
WOOD WOOD FRAME FRAME MOUNTING MOUNTING BRACKET BRACKET DOOR THICKNESS THICKNESS DOOR .66 [16.8] [16.8] MIN. MIN. TO TO .75 .75 [19.0] [19.0] MAX. MAX. .66 ZINC PLATED PLATED FINISH FINISH ZINC
.98±.04 [25.0±1.0] 25.0±1.0 .98±.04 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Features Features ►die die cast cast zinc zinc ►low low profile profile spring loaded lever ►spring loaded lever ►mounting mounting bracket bracket per per table table
► (2) (2) ringed ringed keys keys included included jam nut ► jam nut can can be be positioned positioned on on opposite opposite side of of lever side lever in in order order to to achieve achieve maximum maximum grip grip range range
also available ► also available with with aa thicker thicker gauge gauge metal metal frame mounting bracket for for heavier frame mounting bracket heavier duty duty applications (part X44-MK01) applications (part no. no. X44-MK01) adjustment screw screw with with plastic ► optional optional adjustment plastic head head (part (part no. no. 371) 371) is is available available separately, separately, see page page 111 111 see
Single Key Key Code Single Code Latches Latches and and Non-locking Non-locking Latches Latches Grip Grip Range Range .04 .04 [1.0] [1.0] to to .95 .95 [24.1] [24.1] (1.4 [36] [36] Lever Lever Length) (1.4 Length) Matte Polished Textured Textured Matte Polished Black Chrome Chrome Chrome Black Chrome
Grip Range Grip Range .91 .91 [23.1] [23.1] to to 1.81 1.81 [46.0] [46.0] (2.3 [58] [58] Lever Lever Length) (2.3 Length) Gray Gray
Matte Black Matte Black
Polished Polished Chrome Chrome
Textured Textured Chrome Chrome
Gray Gray
44BK-751 44BK-751
44CH-751 44CH-751
44TC-751 44TC-751
44G-751 44G-751
44BK01-751 44BK01-751
44CH01-751 44CH01-751
44TC01-751 44TC01-751
44G01-751 44G01-751
44BK 44BK
44CH 44CH
44TC 44TC
44G 44G
44BK01 44BK01
44CH01 44CH 01
44TC01 44TC01
44G01 44G01
46BK-751 46BK-751
46CH-751 46CH-751
46TC-751 46TC-751
46G-751 46G-751
46BK01-751 46BK01-751
46CH01-751 46CH01-751
46TC01-751 46TC01-751
46G01-751 46G01-751
46BK 46BK
46CH 46CH
46TC 46TC
46G 46G
46BK01 46BK01
46CH01 46CH 01
46TC01 46TC01
46G01 46G01
Mounting Mounting
Style Style
metal metal mounting mounting
lockingCH751 locking- CH751
wood wood mounting mounting
lockingCH751 locking- CH751
non-locking non-locking
non-locking non-locking
Latches Different Key Key Codes Latches with with (10) (10) Different Codes Grip Range Grip Range .04 .04 [1.0] [1.0] to to .95 .95 [24.1] [24.1] (1.4 [36] [36] Lever Lever Length) (1.4 Length)
Grip GripRange Range.91 .91 [23.1] [23.1] to to 1.81 1.81 [46.0] [46.0] (2.3 [58] [58] Lever Lever Length) (2.3 Length)
Matte PolishedChrome Chrome Textured TexturedChrome Chrome MatteBlack Black Polished
Matte PolishedChrome Chrome Textured TexturedChrome Chrome MatteBlack Black Polished
44BK-KD 44BK-KD
44CH-KD 44CH-KD
44TC-KD 44TC-KD
44BK01-KD 44CH 44CH01-KD 44BK01-KD 01-KD
44TC01-KD 44TC01-KD
46BK-KD 46BK-KD
46CH-KD 46CH-KD
46TC-KD 46TC-KD
46BK01-KD 46CH 46CH01-KD 46BK01-KD 01-KD
46TC01-KD 46TC01-KD
on lock lock cylinder’s ►key key codes: codes: 01-10, 01-10, stamped stamped on cylinder's face face
Request Info
1-800-453-1692 www.aboveboardelectronics.com
110 110
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Mounting Mounting metal metal mounting mounting
Style Style
locking, locking, keyeddifferently differently wood mounting mounting keyed wood
Hinges and Hardware Hinges and Industrial industrial bfrrdWare
LEVER LENGTH LENGTH LEVER GRIP GRIP RANGE RANGE
.50 12.7 .50[12.7] R.48 12.1 R.48[12.1]
.64 16.3 .64[16.3]
LEVER LEVER
;
JAM JAM NUT NUT
ADJUSTMENT ADJUSTMENT SCREW SCREW 3.66 3.66[ 93.0 93.0]
LOCKING LOCKING OPTION OPTION
Latches
Flush Flush Trigger TriggerCompression Compression Latches Latches
.90 22.9
1.62 41.2
OPENED OPENED POSITION POSITION METAL FRAME FRAME METAL MOUNTING MOUNTING BRACKET BRACKET
HOUSING HOUSING
DOOR THICKNESS THICKNESS DOOR .04 MIN. TO TO .20 .20 [5.1] [5.1] MAX. MAX. .04 [1.0] [1.0] MIN.
FLUSH FLUSH TRIGGER TRIGGER
ZINC PLATED PLATED FINISH FINISH ZINC
.87 22.1 .87[22.1]
1.40 35.6 1.40[35.6]
OR OR
RIGHT SIDE RIGHT SIDE VIEW VIEW
FRONT VIEW VIEW FRONT
1.50 38.1 .20 5.1 MIN. .20[5.1]MIN. .43 [10.9] MAX. MAX. .43 [10.9]
FRAME FRAME
3.80 96.5
3.38±.04 [86.0±1.0] 86.0±1.0 3.38±.04
R.12 3.0 MAX. MAX. R.12 [3.0] TYP. TYP. DOOR
re
0
WOOD FRAME FRAME WOOD MOUNTING MOUNTING BRACKET BRACKET
.98±.04 [25.0±1.0] 25.0±1.0 .98±.04
DOOR THICKNESS THICKNESS DOOR .66 [16.8] MIN. MIN. TO TO .75 .75 [19.0] [19.0] MAX. MAX. .66 [16.8]
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
ZINC PLATED PLATED FINISH FINISH ZINC
Features Features die cast cast zinc zinc I die I low low profile profile spring loaded loaded lever lever I spring mounting bracket bracket per per table I mounting table
(2) ringed ringed keys keys included I (2) included jam nut nut can can be be positioned positioned on I jam on opposite opposite side of of lever side lever in in order order to to achieve achieve maximum maximum grip grip range range
also available available with with aa thicker I also thicker gauge gauge metal metal frame bracket for for heavier frame mounting mounting bracket heavier duty duty applications X44-MK01) applications (part (part no. no. X44-MK01) optionaladjustment adjustmentscrew screw with with plastic plastic head I optional head (part (part no. no. 371) 371) is is available available separately, separately, see see below below
Single Key Key Code Single Code Latches Latches and and Non-locking Non-locking Latches Latches Grip Grip Range Range .04 .04 [1.0] [1.0] to to .95 .95 [24.1] [24.1] (1.4 [36] [36] Lever Lever Length) (1.4 Length)
Grip Range Grip Range .91 .91 [23.1] [23.1] to to 1.81 1.81 [46.0] [46.0] (2.3 [58] [58] Lever Lever Length) (2.3 Length) Gray Gray
Matte Black Matte Black
Polished Polished Chrome Chrome
47TC-751 47TC-751
47G-751 47G-751
47BK01-751 47BK01-751
47CH01-751 47CH01-751
47TC01-751 47TC01-751
47G01-751 47G01-751
47CH 47CH
47TC 47TC
47G 47G
47BK01 47BK01
47CH01 47CH01
47TC01 47TC01
47G01 47G01
49CH-751 49CH-751
49TC-751 49TC-751
49G-751 49G-751
49BK01-751 49BK01-751
49CH01-751 49CH01-751
49TC01-751 49TC01-751
49G01-751 49G01-751
49CH 49CH
49TC 49TC
49G 49G
49BK01 49BK01
49CH01 49CH01
49TC01 49TC01
49G01 49G01
Matte Matte Black Black
Polished Polished Chrome Chrome
Textured Textured
47BK-751 47BK-751
47CH-751 47CH-751
47BK 47BK 49BK-751 49BK-751 49BK 49BK
Chrome Chrome
Textured Textured Chrome Chrome
Gray Gray
Mounting Mounting
Style Style
metal metal mounting mounting
lockingCH751 locking- CH751
wood wood mounting mounting
lockingCH751 locking- CH751
non-locking non-locking
non-locking non-locking
Adjustment Screw Screw with with Plastic Plastic Head Adjustment Head Part Part Number Number
371 371
Material Material
Grip Range Grip Range
304SS 304SS
0 [0] -- .79 0 [0] .79 [20.1] [20.1]
screw & & nut screw nut
.59 [15.1] 1.65 [42.0] [42.0] .59 [15.1] --1.65
plastic head headprotects protectssurface surface finish finish from I plastic from being being damaged damaged
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
111 111
Latches
SIERRA PACIFIC ENGINEERING AND PRODUCTS Large Lever Latches Large Sealed Sealed Compression Compression Lever Latches LEVER LENGTH LEVER LENGTH 12.7 .50 50[12.71
GRIP GRIP RANGE RAZE
FRAME FRAME
35[9.01
[0] MIN. MIN. 00 [01 .35 9.0 MAX. MAX
.58 14.6 .58[14.6] ADJUSTMENT ADJUSTMENT SCREW SCREW
LEVER LEVER
DOOR DOOR
JAM JAM NUT NUT
3.54±.04 90.0±1.0 3.54104[ 0.0t1.0]
4.34 110.3 4.34[ 10.31 R.12 3.0 R.12[3.01 MAX MAX.
HOUSING HOUSING
OPENED OPENED POSITION POSITION
LOCKING LOCKING OPTION OPTION
patented patented
for .04" .04" -- .43" for .43" door thickness door thickness
Features Features die cast cast zinc zinc I die low profile profile I low dust shutter shutter I dust spring loaded loaded lever lever I spring includes: I includes: (2) ringed ringed keys keys I (2) (1) mounting I (1) mounting bracket bracket with with mounting screws mounting screws
(2) or or (3) (3) screws I (2) screws are are supplied per per latch latch supplied to accommodate accommodate to the different different door the door thicknesses (see thicknesses (see table below below and table and bracket bracket information information next to it it next to
Grip Range Grip Range for A3" .43" -- .83" for .83" door thickness door thickness
AchieveNEMA NEMA 4/ I Achieve 4/ IP65 IP65 when when installed installed with optional with optional gasket and supplied gasket and supplied mounting screw mounting screw optional gasket gasket I optional part 9-1G part no. no. 9-1 G
Door Thickness Thickness Door .04 [1.0] [1.0] to .04 to .43 .43 [10.9] [10.9]
.04 [1.0] [1.0] to .04 to .55 .55 [14.0] [14.0] (1.14 [28.9] [28.9] Lever Lever Length) (1.14 Length)
.43 [10.9] [10.9] to .43 to .83 .83 [21.1] [21.1]
.83 [21.1] [21.1] to .83 to 1.61 1.61 [40.9] [40.9]
for .83" .83" -- 1.61" for 1.61" door thickness door thickness
.04 [1.0] [1.0] to .04 to .43 .43 [10.9] [10.9] .55 [14.0] [14.0] to .55 to 1.14 1.14 [29.0] [29.0] (1.73 [44.0] [44.0] Lever Lever Length) (1.73 Length)
.43 [10.9] [10.9] to .43 to .83 .83 [21.1] [21.1]
.83 [21.1] [21.1] to .83 to 1.61 1.61 [40.9] [40.9]
.04 [1.0] [1.0] to .04 to .43 .43 [10.9] [10.9] 1.14 1.14 [29.0] [29.0] to to 1.77 1.77 [45.0] [45.0] (2.36 Length) (2.36 [60.0] [60.0] Lever Lever Length)
.43 [10.9] [10.9] to .43 to .83 .83 [21.1] [21.1]
.83 [21.1] [21.1] to .83 to 1.61 1.61 [40.9] [40.9]
.04 [1.0] [1.0] to .04 to .43 .43 [10.9] [10.9] 1.77 1.77 [45.0] [45.0] to to 2.24 2.24 [57.0] [57.0] (2.80 Length) (2.80 [72.0] [72.0] Lever Lever Length)
.43 [10.9] [10.9] to .43 to .83 .83 [21.1] [21.1]
.83 [21.1] [21.1] to .83 to 1.61 1.61 [40.9] [40.9]
112 112
Download 31:Immo @ Download @www.spep.com www.spep.com
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
RIGHT VIEW RIGHT SIDE SIDE VIEW
FRONT VIEW FRONT VIEW
Latch Mounting Brackets Latch Mounting Brackets (one latch, (one set set per per latch, see table table for for door thickness) see door thickness)
1.38±.04 35.0±1.0 1.38±.0435.0t1.0]
.87 22.0 .87[22.0]
2.13 54.1 2.13[04.1
jam nut nut can can be optional adjustment adjustment I jam be I optional positioned screw with positioned on on screw with plastic plastic opposite side head (part no. is opposite side head (part no. 371) 371) is of available separately, of lever lever in in order order available separately, to achieve max. max. see page page 111 111 to achieve see grip grip range range
Part No. Part No.
Lock Key Lock Key Code Code
9-10BK01 9-10BK01
non-locking non-locking
9-12BK01 9-12BK01
CH751 CH751
9-10BK02 9-10BK02
non-locking non-locking
9-12BK02 9-12BK02
CH751 CH751
9-10BK03 9-10BK03
non-locking non-locking
9-12BK03 9-12BK03
CH751 CH751
9-10BK04 9-10BK04
non-locking non-locking
9-12BK04 9-12BK04
CH751 CH751
9-10BK05 9-10BK05
non-locking non-locking
9-12BK05 9-12BK05
CH751 CH751
9-10BK06 9-10BK06
non-locking non-locking
9-12BK06 9-12BK06
CH751 CH751
9-10BK07 9-10BK07
non-locking non-locking
9-12BK07 9-12BK07
CH751 CH751
9-10BK08 9-10BKOB
non-locking non-locking
9-12BK08 9-12BK08
CH751 CH751
9-10BK09 9-10BK09
non-locking non-locking
9-12BK09 9-12BK09
CH751 CH751
9-10BK10 9-10BK10
non-locking non-locking
9-12BK10 9-12BK10
CH751 CH751
9-10BK11 9-10BK11
non-locking non-locking
9-12BK11 9-12BK11
CH751 CH751
9-10BK12 9-10BK12
non-locking non-locking
9-12BK12 9-12BK12
CH751 CH751
Request Info
1-800-453-1692 www.aboveboardelectronics.com
4
AMILY
r
Large Lever Latches Large Sealed Sealed Compression Compression Lever Latches
Latches
NEMA
EW PP DUCT
Hinges and Hardware Hinges and Industrial industrial Hf-rdware
DIM DIM A A GRIP RANGE
.47 12.0
t PL. C ]_, ,„
R.12 3.0 R.12 E3.0 (4) PLCS. S
.59 15.0 LEVER LEVER
ADJUSTMENT ADJUSTMENT SCREW SCREW JAM NUT
+.01 +.2 3.54 - .00 90.0 .0
4.33 110.0
OPENED OPENED POSITION POSITION
+.01 +.2 35.0 .0 11.38 WIZ - .00 [35.01
HOUSING
locking locking
LOCKING LOCKING OPTION OPTION
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
.87 22.0
1.97 50.0
Features Features die cast cast zinc zinc I die low profile profile I low dust shutter shutter I dust spring loaded loaded lever lever I spring
includes: I includes: (2) ringed ringed keys keys I (2) (1) mounting I (1) mounting bracket bracket with screw with screw gasket I gasket
Mounting Bracket A
bracketand andscrew screw are are supplied supplied I bracket to accommodate the different different to accommodate the door door thicknesses thicknesses (see (see table table and and bracket next to to it) it) bracket information information next
jam nut nut can can be be positioned positioned I jam on oppositeside side of of lever lever in in on opposite order to achieve achieve max. max. grip order to grip range range
MOUNTING BRACKET A
MOUNTING BRACKET B
(20MM MOUNTING SCREW LENGTH)
(20MM MOUNTING SCREW LENGTH)
illllllllllllllllllll MOUNTING BRACKET A 20MM MOUNTING SCREW LENGTH
MOUNTING
(20MM MOUNTING SCREW LENGTH) with 20MM long screw with 20MM long screw
Part Part No. No.
Lock Lock Key Key Code Code
9-20BK01 9-20BK01
non-locking non-locking
9-22BK01 9-22BK01
CH751 CH751with withdust dust shutter shutter
9-20BK02 9-20BK02
non-locking non-locking
9-22BK02 9-22BK02
CH751 CH751with withdust dust shutter shutter
9-20BK04 9-20BK04
non-locking non-locking
9-22BK04 9-22BK04
CH751 CH751with withdust dust shutter shutter
9-20BK05 9-20BK05
non-locking non-locking
9-22BK05 9-22BK05
CH751 CH751with withdust dust shutter shutter
9-20BK06 9-20BK06
non-locking non-locking
9-22BK06 9-22BK06
CH751 CH751with withdust dust shutter shutter
9-20BK07 9-20BK07
non-locking non-locking
9-22BK07 9-22BK07
CH751 CH751with withdust dust shutter shutter
9-20BK08 9-20BK08
non-locking non-locking
9-22BK08 9-22BK08
CH751 CH751with withdust dust shutter shutter
9-20BK09 9-20BK09
non-locking non-locking
9-22BK09 9-22BK09
CH751 CH751with withdust dust shutter shutter
9-20BK09A 9-20BK094
non-locking non-locking
9-22BK09A 9-22BK09A
CH751 CH751with withdust dust shutter shutter
9-20BK10 9-20BK10
non-locking non-locking
9-22BK10 9-22BK10
CH751 CH751with withdust dust shutter shutter
9-20BK11 9-20BK11
non-locking non-locking
9-22BK11 9-22BK11
CH751 CH751with withdust dust shutter shutter
9-20BK12 9-20BK12
non-locking non-locking
9-22BK12 9-22BK12
CH751 CH751with withdust dust shutter shutter
9-20BK12A 9-20BK124
non-locking non-locking
9-22BK12A 9-22BK12A
CH751 CH751with withdust dust shutter shutter
Request Info
Mounting Mounting Bracket Bracket
Panel Panel Thickness Thickness
A A
.04 [1.0] [1.0] -- .43 .43 [11.0] .04 [11.0]
Grip Grip Range Range
Dim A Dim A
.04 [1.0] [1.0] -- .55 .04 .55 [14.0] [14.0]
1.14 [29.0] [29.0] 1.14
B B
.43 [11.0] [11.0] -- .83 .43 .83 [21.0] [21.0]
.04 [1.0] [1.0] -- .55 .04 .55 [14.0] [14.0]
1.14 [29.0] [29.0] 1.14
A A
.04 [1.0] [1.0] -- .43 .43 [11.0] .04 [11.0]
.55 [14.0] [14.0] -1.14 .55 -1.14 [29.0] [29.0]
1.73 [44.0] [44.0] 1.73
B B
.43 [11.0] [11.0] -- .83 .43 .83 [21.0] [21.0]
.55 [14.0] [14.0] -1.14 .55 -1.14 [29.0] [29.0]
1.73 [44.0] [44.0] 1.73
Mounting Mounting Screw Screw Length Length
(20MM MOUNTING
30MM MOUNTING SCREW LENGTH
Mounting Bracket B 20MM MOUNTING SCREW LENGTH
.78 [20.0] [20.0] .78 MOUNTING BRACKET A
MOUNTING BRACKET B
(20MM MOUNTING SCREW LENGTH)
(20MM MOUNTING SCREW LENGTH)
30MM MOUNTING SCREW LENGTH
.78 [20.0] [20.0] .78 MOUNTING BRACKET A
.78 [20.0] [20.0] .78
(20MM MOUNTING SCREW LENGTH) 20MM
MOUNTING BRA
MOUNTING BRACKET B
(20MM MOUNTING SCREW LENGTH) MOUNTING SCREW LENGTH
(20MM MOUNTING SCR
with 20MM 20MM long with long screw screw
.78 [20.0] [20.0] .78 30MM MOUNTING SCREW LENGTH
Mounting Bracket Bracket C C
20MM MOUNTING SCREW LENGTH Mounting
C C
.83 [21.0] [21.0] -- 1.22 [31.0] .83 1.22 [31.0]
.55 [14.0] [14.0] -1.14 .55 -1.14 [29.0] [29.0]
1.73 [44.0] [44.0] 1.73
.78 [20.0] [20.0] .78
A A
.04 [1.0] [1.0] -- .43 .43 [11.0] .04 [11.0]
1.14 [29.0] 1.77 [45.0] [45.0] 1.14 [29.0] --1.77
2.36 [60.0] 236 [60.0]
.78 [20.0] [20.0] .78
MOUNTING BRACKET A (20MM MOUNTING SCREW LENGTH)
MOUNTING BRACKET B
(20MM MOUNTING SCREW LENG
30MM MOUNTING SCREW LENGTH
(20MM MOUNTING SCREW LENGTH)
B B
.43 [11.0] [11.0] -- .83 .43 .83 [21.0] [21.0]
1.14 [29.0] 1.77 [45.0] [45.0] 1.14 [29.0] --1.77
illllllllllllllllllll
MOUNTING SCREW LENGTHC MOUNTING BRACKET MOUNTING BRACKET20MM B
MOUNTING BRACKET A
2.36 [60.0] 236 [60.0]
(20MM MOUNTING SCREW LENGTH)
.78 [20.0] [20.0] .78
with(20MM 20MM long screw MOUNTING SCREW LENGTH) with 20MM long screw
MOUNTING BRACKET A (20MM MOUNTING SCREW LENGTH)
C C
.83 [21.0] [21.0] -1.22 - 1.22 [31.0] [31.0] 1.14 1.14 [29.0] 1.77 [45.0] [45.0] 2.36 [60.0]LENGTH.78 .78 [20.0] [20.0] .83 [29.0] --1.77 236 SCREW [60.0] 20MM MOUNTING
D D
1.22 [31.0] -- 1.61 [41.0] 1.14 1.14 [29.0] [29.0] -- 1.77 1.22 [31.0] 1.61 [41.0] 1.77 [45.0] [45.0]
2.36 [60.0] 236 [60.0]
1.18 [30.0] [30.0] 1.18
30MM MOUNTING SCREW LENGTH
MOUNTING BRA
(30MM MOUNTING SCR
MOUNTING BRACKET B
(20MM MOUNTING SCREW LENG
Mounting Bracket D Mounting Bracket D
20MM MOUNTING SCREW LENGTH
30MM MOUNTING SCREW LENGTH
A A
MOUNTING BRACKET A MOUNTING BRACKET .04 [1.0] [1.0] -- .43 1.77 [45.0] [45.0] -- 2.24 2.83 [72.0]B .04 .43 [11.0] [11.0] 1.77 2.24 [57.0] [57.0] 2.83 [72.0] (20MM MOUNTING SCREW LENGTH)
(20MM MOUNTING SCREW LENGTH)
B B
.43 [11.0] [11.0] -- .83 .43 .83 [21.0] [21.0]
1.77 [45.0] [45.0] -- 2.24 1.77 2.24 [57.0] [57.0]
C C
.83 [21.0] [21.0] -- 1.22 [31.0] 1.77 1.77 [45.0] [45.0] -- 2.24 .83 1.22 [31.0] 2.24 [57.0] [57.0]
D D
1.22 [31.0] -- 1.61 [41.0] 1.77 1.77 [45.0] [45.0] -- 2.24 1.22 [31.0] 1.61 [41.0] 2.24 [57.0] [57.0]
MOUNTING BRACKET C .78 [20.0] [20.0] .78
1111111111111111111111111 MOUNTING BRACKET D
(20MM MOUNTING SCREW LENGTH) (30MM MOUNTING LENGTH) 30MM MOUNTING SCREW SCREW LENGTH
with 30MM 30MM long with long screw screw
2.83 [72.0] 2.83 [72.0]
.78 [20.0] [20.0] .78
2.83 [72.0] 2.83 [72.0]
.78 [20.0] [20.0] .78
2.83 [72.0] 2.83 [72.0]
1.18 [30.0] [30.0] 1.18
20MM MOUNTING SCREW LENGTH
1-800-453-1692 www.aboveboardelectronics.com
30MM MOUNTING SCREW LENGTH
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
113
Latches
SIEP"1 PACIFIC ENGINEERING AND PRODUCTS Small Sealed Compression Compression Lever Lever Latches Small Sealed Latches
NEMA
4
IP65
RATED
LEVER LENGTH LENGTH LEVER
TALL TALL LEVER LEVER
GRIP GRIP RANGE RANGE
.47 12.0 .47[12.0]
ADJUSTMENT -1 ADJUSTMENT SCREW SCREW
1.18 29.9 1.18[29.9] TALL LEVER TALL LEVER
.59 14.9 .59[14.9] SHORT LEVER SHORT LEVER
GASKET GASKET
JAM NUT NUT JAM SHORT SHORT LEVER LEVER
LEVER LEVER GASKET GASKET 3.16 80.2 3.16[80.2]
MOUNTING MOUNTING BRACKET BRACKET
CC locking patent patent pending pending
LOCKING LOCKING OPTION OPTION
HOUSING HOUSING OPENED OPENED POSITION POSITION
1.38 35.0 1.38[ 35.0]
1.14 28.9 1.14[28.9] RIGHT SIDE RIGHT SIDE VIEW VIEW
FRONT VIEW FRONT VIEW
FRAME .28 7.0 MAX. - SHORT ARM .08 [2.0] MIN. TO .2817.01 .08 [2.0] MIN. TO .83 [21.0] MAX. - LONG ARM
DOOR R DOO
AM
r
2.80±.04 71.0±1.0 2.80±.04[ R.12 3.0 ] R.12[3.0 MAX. MAX
non-locking non-locking .98±.04 25.0±1.0 ] .98±.04[25.0±1.0 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Features Features includes: ► includes: gasket ► gasket dust shutter ► dust shutter (2) ringed keys ► (2) ringed keys
die cast cast zinc ► die zinc ► spring spring loaded loaded lever lever low profile ► low profile
achieve NEMA NEMA 4/ ► achieve 4/ IP65 IP65 when when installed with optional gasket gasket installed with optional and supplied screw and supplied mounting mounting screw optional adjustment adjustment screw screw ► optional with plastic plastic head head (part with (part no. no. 371) is available 371) is available separately separately
Small Sealed Sealed Compression Compression Lever Lever Latches Latches Small Grip Grip Range Range
114 114
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
Door Thickness Thickness Door
.04 [1.0] [1.0] to .04 to .98 .98 [25.0] [25.0] (1.79 [45.4] [45.4] Lever Lever Length) (1.79 Length)
.43 [11.0] .43 [11.0] Max. Max.
.59 [15.0] [15.0] to .59 to 1.18 1.18 [30.0] [30.0] (1.92 [48.9] [48.9] Lever Lever Length) (1.92 Length)
.43 [11.0] .43 [11.0] Max. Max.
Matte Black Black Matte
Lock Key Lock Key Code Code
9-15BK01 9-15BK01
non-locking non-locking
9-16BK01 9-16BK01
CH751 CH751
9-16BK11 9-16BK11
CH545 CH545
9-15BK02 9-15BK02
non-locking non-locking
9-16BK02 9-16BK02
CH751 CH751
9-16BK12 9-16BK12
CH545 CH545
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industrial Hardware bfrrdWare
GRIP RANGE GRIP RANGE
Latches
Flush Flush Lift Lift and and Turn TurnCompression Compression Latches Latches
2.4 [60] 60 2.4 .15 [4] 4 .15 1.34 [34.0] 34.0 1.34 .12 3.0 .12 [3.0] COMPRESSION COMPRESSION 3.3 85
SQ. SHAFT WITH WITH M8 M8 THD. THD. SQ. SHAFT JAM JAM NUT NUT (2) (2)
KEY-LOCKING KEY-LOCKING
LOCK LOCK WASHER WASHER (2) (2) CAM CAM NON-REMOVABLE NON-REMOVABLE NUT NUT TOOL ACTIVATED ACTIVATED TOOL (PHILIPS DRIVER) (PHILIPS DRIVER) 1.6 40
2.1 52
FRONT VIEW FRONT VIEW
RIGHT VIEW RIGHT SIDE SIDE VIEW
R.12 3.0 MAX MAX. R12[3.0] TYP.
TOP FRAME OPTION
.34±.06 [8.6:0.5] 8.6±1.5 .34..06 .57±.01 14.5±.3 .57..01[14.5..3] SIDE FRAME OPTION
material: die die cast cast zinc zinc I material: spring loaded loaded lever lever I spring gasketavailable available separately, separately, part 8-1G I gasket part no. no. 8-1G straightsteel, steel, zinc zinc plated plated cam cam available available separately I straight separately (part See illustration (part no. no. 5C11). 5C11). See illustration below. below.
NOIld0 3VIVLIA 30IS
Features Features includes: I includes: (1) mounting mounting bracket bracket I (1) (1) mounting mounting screw screw I (1) (1) cam cam I (1) (2) lock I (2) lock washers washers (2) jam jam nuts I (2) nuts (2) ringed ringed brass brass keys, keys, nickel nickel plated, I (2) plated, key CH751 key code code CH751
LATCH [TCH SHAFT
2.88±.01 73.1E3] 73.2±.3 2.138.01
Non-Locking Non-Locking Latches Latches Part Part Number Number Polished Polished Chrome Chrome
Black Black Powder Powder
8-10CH-4 8-10CH-4
8-10BK-4 8-10BK-4
8-10CH-8 8-10CH-8
8-10BK-8 8-10BK-8
8-10CH-12 8-10CH-12
8-10BK-12 8-10BK-12
Grip Grip Range Range Textured Textured Chrome Chrome
Cam Offset In Cam Offset In
DOOR
Cam Offset Cam Offset Out Out
Min. Min.
Max. Max.
Min. Min.
Max. Max.
8-10TC-4 8-10TC-4
1.02 [25.9] 1.02 [25.9]
1.41 [35.8] [35.8] 1.41
1.41 [35.8] [35.8] 1.41
1.81 [46.0] [46.0] 1.81
8-10TC-8 8-10TC-8
.63 [16.0] [16.0] .63
1.02 [25.9] [25.9] 1.02
1.81 [46.0] [46.0] 1.81
2.20 [55.9] 2.20 [55.9]
8-10TC-12 8-10TC-12
.23 [5.8] [5.8] .23
.63 [16.0] [16.0] .63
2.20 [55.9] 2.20 [55.9]
2.59 [65.8] 2.59 [65.8]
1.19±.01 [30.1e.3] 30.2±.3 1.19.1.01
.34±.06 [8.6t1.5] 8.6±1.5 .34±.06
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
.27 6.8 .27[6.8] COIN COIN
.63 15.9 .63[15.9]
Key-Locking Key-Locking Latches Latches Part Part Number Number Polished Polished Chrome Chrome
Black Black Powder Powder
8-12CH-4 8-12CH-4
8-12BK-4 8-12BK-4
8-12CH-8 8-12CH-8 8-12CH-12 8-12CH-12
Grip Grip Range Range Textured Textured Chrome Chrome
Cam Offset In Cam Offset In
Cam Offset Offset Out Out Cam
Min. Min.
Max. Max.
Min. Min.
Max. Max.
8-12TC-4 8-12TC-4
1.02 [25.9] 1.02 [25.9]
1.41 [35.8] [35.8] 1.41
1.41 [35.8] [35.8] 1.41
1.81 [46.0] [46.0] 1.81
8-12BK-8 8-12BK-8
8-12TC-8 8-12TC-8
.63 [16.0] [16.0] .63
1.02 [25.9] [25.9] 1.02
1.81 [46.0] [46.0] 1.81
2.20 [55.9] 2.20 [55.9]
8-12BK-12 8-12BK-12
8-12TC-12 8-12TC-12
.23 [5.8] [5.8] .23
.63 [16.0] [16.0] .63
2.20 [55.9] 2.20 [55.9]
2.59 [65.8] 2.59 [65.8]
Polished Polished Chrome Chrome
Black Black Powder Powder
8-14CH-4 8-14CH-4
8-14BK-4 8-14BK-4
8-14CH-8 8-14CH-8
8-14BK-8 8-14BK-8
8-14CH-12 8-14CH-12
8-14BK-12 8-14BK-12
Request Info
Grip Grip Range Range Textured Textured Chrome Chrome
Cam Offset In Cam Offset In Max. Max.
Min. Min.
Max. Max.
8-14TC-4 8-14TC-4
1.02 [25.9] 1.02 [25.9]
1.41 [35.8] [35.8] 1.41
1.41 [35.8] [35.8] 1.41
1.81 [46.0] [46.0] 1.81
8-14TC-8 8-14TC-8
.63 [16.0] [16.0] .63
1.02 [25.9] [25.9] 1.02
1.81 [46.0] [46.0] 1.81
2.20 [55.9] 2.20 [55.9]
8-14TC-12 8-14TC-12
.23 [5.8] [5.8] .23
.63 [16.0] [16.0] .63
2.20 [55.9] 2.20 [55.9]
2.59 [65.8] 2.59 [65.8]
1-800-453-1692
RIGHT SIDE VIEW RIGHT SIDE VIEW
Cam Offset Cam Offset Out Out
Min. Min.
www.aboveboardelectronics.com
.187 4.75 .187[4.75]
.260 6.60 FRONT VIEW FRONT VIEW
COINED STRAIGHT STRAIGHT CAM CAM COINED PART PART NO. NO. 5C11 5C11 (SOLD SEPARATELY) SEPARATELY) (SOLD
Tool Activated Tool Activated Latches Latches Part Part Number Number
.325 8.26
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
115 115
1.97 50.0
2.41 61.1
Latches
''TERRA PACIFIC EM-
MOUNTING BRACKET
-ERING AND PRODUCTS
(2) JAM NUTS
NEMA
Flush-Mount Flush-Mount Round Round Compression Compression Latches Latches
4
.09 2.4 THK. GASKET
TOOL ACTIVATED OPTION
.188 4.76 COMPRESSION
1.29 32.8
FRONT VIEW
2.25 57.2 MOUNTING BRACKET
REAR VIE
RIGHT SIDE VIEW
1.06 .02 [26.9±.5] 26.9 .5 1.06±.02 OPTIONAL
FRAME DOOR
patented 1.88 .06 [47.8±1 47.8 1.5 1.88±.06 .5 ] FOR SHORT CAM .06 FOR LONG CAM 2.38 ±.06
.57 .02 [14.5-1.5] 14.5 .5 -1 .57±.02
2.000 .020 [50.8±.5] 50.8 .5 02.000±.020
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
64.1 2.52 [64.1]
15.9 .63 [15.9]
GRIP RANGE
LONG CAM
...1
LONG CAM SHORT CAM SHORT CAM
PANEL THK. TABLE) "" (SEE TABLE)-
2.73 69.4 2.736 94] LONG 1_01, 1 CAM CAM 56.2 2.21 [56.2] SHORT CAM
1L L
M8 x 1.25 THD. THD.
GASKET (2) SCREWS 1.97 [50.0] 50.0 01.97
2.41 [61.1] 61.1 02.41
MOUNTING BRACKET
(2) JAM JAM (2 NUTS NUTS
IL .09 2.4 THK. THK. .09[2.4] GASKET
TOOL ACTIVATED ACTIVATED OPTION OPTION TOOL
4.76 .188 [4.76] COMPRESSION
32.8 1.29 [32.8]
FRONT VIEW FRONT VIEW
2.25 [57.2] 57.2 02.25 MOUNTING BRACKET
REAR VIEW VIEW REAR
RIGHT VIEW RIGHT SIDE SIDE VIEW
1.06 .02 26.9 .5 OPTIONAL FRAME DOOR
Features Features
1.88 .06 47.8 1.5 FOR SHORT CAM
2.38 .06 FOR LONG CAM die cast cast zinc zinc I die I polished polishedchrome chromefinish finish water sealing sealing I water tooloperated operatedlock lock.02can can be.5turned turnedwith with aa standard standardscrewdriver screwdriver I tool be .57 14.5 passes500 500hour hoursalt saltspray spraytest testper perASTM ASTM B117 I passes 8117 2.000 .020 50.8 .5
MOUNTING DIMENSIONS
Flush-Mount Flush-Mount Round Round Compression Compression Latches Latches
Part Part Number Number Short Cams Cams Short Non-Locking Non-Locking
Long Long Cams Cams Tool Tool
Activated Activated
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Non-Locking Non-Locking
Tool Tool
Panel Panel
Thickness Thickness
Activated Activated
7-CH-12 7-CH-12
7-02CH-12 7-02CH-12
7-10CH-12 7-10CH-12
7-12CH-12 7-12CH-12
7-CH-8 7-CH-8
7-02CH-8 7-02CH-8
7-10CH-8 7-10CH-8
7-12CH-8 7-12CH-8
7-CH-4 7-CH-4
7-02CH-4 7-02CH-4
7-10CH-4 7-10CH-4
7-12CH-4 7-12CH-4
7-50CH-12 7-50CH-12
7-52CH-12 7-52CH-12
7-60CH-12 7-60CH-12
7-62CH-12 7-62CH-12
7-50CH-8 7-50CH-8
7-52CH-8 7-52CH-8
7-60CH-8 7-60CH-8
7-62CH-8 7-62CH-8
7-50CH-4 7-50CH-4
7-52CH-4 7-52CH-4
7-60CH-4 7-60CH-4
7-62CH-4 7-62CH-4
Request Info
116 116
Grip Range Grip Range
1-800-453-1692 www.aboveboardelectronics.com
Cam Offset In Cam Offset In
Cam Offset Out Cam Offset Out
Min. Min.
Max. Max.
Min. Min.
Max. Max.
.075 [1.91] [1.91] .075 to to ..475 475 [12.07] [12.07]
-------
1.10 [27.9] 1.10 [27.9]
2.48 [63.0] [63.0] 2.48
3.00 [76.2] [76.2] 3.00
1.06 [26.9] [26.9] 1.06
1.57 [39.9] 1.57 [39.9]
2.01 [51.1] [51.1] 2.01
2.52 [64.0] 2.52 [64.0]
1.53 [38.9] [38.9] 1.53
2.04 [51.8] 2.04 [51.8]
-----
-----
[12.07] ..475 475 [12.07] to to ..885 885 [22.48] [22.48]
-----
1.10 [27.9] 1.10 [27.9]
2.48 [63.0] [63.0] 2.48
3.00 [76.2] [76.2] 3.00
1.06 [26.9] [26.9] 1.06
1.57 [39.9] 1.57 [39.9]
2.01 [51.1] [51.1] 2.01
2.52 [64.0] 2.52 [64.0]
1.53 [38.9] [38.9] 1.53
2.04 [51.8] 2.04 [51.8]
-----
-----
Hinges and Hinges and Industrial industrial Hardware bfrrdWare
Offset In Grip Grip Offset In Min. Min.
Offset Out Out Grip Grip Offset
Max. Max.
Min. Min.
Material Material
Max Max
Finish Finish
Latches
Mini Mini Pull Pull Action Action Lift Lift and and Turn TurnCompression Compression Latches Latches Part Part Number Number
n
5-15BK 5-15BK
no no cam cam
no no cam cam
die zinc die cast cast zinc
matte black matte black
5-15CH 5-15CH
no no cam cam
no no cam cam
die zinc die cast cast zinc
polished polished chrome chrome
5-15BK-1 5-15BK-1
.39 [9.9] [9.9] .39
.63 [16.0] [16.0] .63
.63 [16.0] [16.0] .63
.87 [22.1] [22.1] .87
die zinc die cast cast zinc
matte black matte black
5-15CH-1 5-15CH-1
.39 [9.9] [9.9] .39
.63 [16.0] [16.0] .63
.63 [16.0] [16.0] .63
.87 [22.1] [22.1] .87
die zinc die cast cast zinc
polished polished chrome chrome
5-15BK-2 5-15BK-2
.16 [4.1] [4.1] .16
.39 [9.9] [9.9] .39
.87 [22.1] [22.1] .87
1.10 [27.9] [27.9] 1.10
die zinc die cast cast zinc
matte black matte black
5-15CH-2 5-15CH-2
.16 [4.1] [4.1] .16
.39 [9.9] [9.9] .39
.87 [22.1] [22.1] .87
1.10 [27.9] [27.9] 1.10
die zinc die cast cast zinc
polished polished chrome chrome
5-15BK-3 5-15BK-3
0.0 [0] [0] 0.0
.16 [4.1] [4.1] .16
1.10 [27.9] 1.10 [27.9]
1.34 [34.0] [34.0] 1.34
die zinc die cast cast zinc
matte black matte black
5-15CH-3 5-15CH-3
0.0 [0] [0] 0.0
.16 [4.1] [4.1] .16
1.10 [27.9] 1.10 [27.9]
1.34 [34.0] [34.0] 1.34
die zinc die cast cast zinc
polished polished chrome chrome
CD
AS-
die cast cast zinc zinc I die includes: I includes: (1) reversible reversible cam cam I (1) (1) body I (1) body nut nut (2) jam jam nuts I (2) nuts (2) lock lock washers I (2) washers
OFFSET OUT OUT GRIP GRIP OFFSET OFFSET IN IN GRIP GRIP OFFSET .67 17.0 .50 12.7 .50[12.7]
.81 20.6
SQ. .15 3.8 SQ. .15[3.8]
A 1.37 34.9 1.37[34.9]
h VIEW A VIEW A SHAFT END SHAFT END
1.27 32.2
M5 M5 THD. THD.
.11 2.8 .11 [2.8] COMPRESSION COMPRESSION
1.05 26.7
.34 .34 [ 8.7 8.7 ]
.375 9.53 .375[9.53]
TOP FRAME
.63 15.9 63[15.9]
DOOR DOOR
+) SIDE FRAME
3NIV2IJ BOIS
.320 8.13 320[8.13]
.63 15.9 -•-• .63[15.9]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
117 117
Latches
SIERRA PACIFY'
ERING AND PRODUCTS
Small Pull Action Lift and Small Pull Action Lift and Turn TurnCompression Compression Latches Latches Part Part Number Number
4
Offset In In Grip Grip Offset Min. Min.
Offset Out Out Grip Grip Offset
Max. Max.
Min. Min.
Max Max
Material Material
Finish Finish
5-20 5-20
no no cam cam
no no cam cam
die die cast cast zinc zinc
natural with protective protective film film natural with
5-20BC 5-20BC
no no cam cam
no no cam cam
die die cast cast zinc zinc
brushed brushed chrome chrome
5-20BK 5-20BK
no no cam cam
no no cam cam
die die cast cast zinc zinc
matte black matte black
5-20CH 5-20CH
no no cam cam
no no cam cam
die die cast cast zinc zinc
polished polished chrome chrome
5-20SS 5-2055
304SS 304SS
passivated passivated
5-20-12 5-20-12
---
no no cam cam ---
1.660 [42.16] [42.16] 1.660
no no cam cam 2.050 [52.07] 2.050 [52.07]
die die cast cast zinc zinc
natural with protective protective film film natural with
5-20BC-12 5-20BC-12
---
---
1.660 [42.16] [42.16] 1.660
2.050 [52.07] 2.050 [52.07]
die die cast cast zinc zinc
brushed brushed chrome chrome
5-20BK-12 5-20BK-12
---
---
1.660 [42.16] [42.16] 1.660
2.050 [52.07] 2.050 [52.07]
die die cast cast zinc zinc
matte black matte black
5-20CH-12 5-20CH-12
---
---
1.660 [42.16] [42.16] 1.660
2.050 [52.07] 2.050 [52.07]
die die cast cast zinc zinc
polished polished chrome chrome
5-20SS-12 5-2055-12
---
---
1.660 [42.16] [42.16] 1.660
2.050 [52.07] 2.050 [52.07]
304SS 304SS
passivated passivated
5-20-8 5-20-8
.080 [2.03] [2.03] .080
.470 [11.94] [11.94] .470
1.260 [32.00] [32.00] 1.260
1.650 [41.91] 1.650 [41.91]
die die cast cast zinc zinc
natural with protective protective film film natural with
5-20BC-8 5-20BC-8
.080 [2.03] [2.03] .080
.470 [11.94] [11.94] .470
1.260 [32.00] [32.00] 1.260
1.650 [41.91] 1.650 [41.91]
die die cast cast zinc zinc
brushed brushed chrome chrome
5-20BK-8 5-20BK-8
.080 [2.03] [2.03] .080
.470 [11.94] [11.94] .470
1.260 [32.00] [32.00] 1.260
1.650 [41.91] 1.650 [41.91]
die die cast cast zinc zinc
matte black matte black
5-20CH-8 5-20CH-8
.080 [2.03] [2.03] .080
.470 [11.94] [11.94] .470
1.260 [32.00] [32.00] 1.260
1.650 [41.91] 1.650 [41.91]
die die cast cast zinc zinc
polished polished chrome chrome
5-20SS-8 5-2055-8
.080 [2.03] [2.03] .080
.470 [11.94] [11.94] .470
1.260 [32.00] [32.00] 1.260
1.650 [41.91] 1.650 [41.91]
304SS 304SS
passivated passivated
5-20-4 5-20-4
.470 [11.94] [11.94] .470
.870 [22.10] [22.10] .870
.870 [22.10] [22.10] .870
1.250 [31.75] 1.250 [31.75]
die zinc die cast cast zinc
natural with protective protective film film natural with
5-20BC-4 5-20BC-4
.470 [11.94] [11.94] .470
.870 [22.10] [22.10] .870
.870 [22.10] [22.10] .870
1.250 [31.75] 1.250 [31.75]
die zinc die cast cast zinc
brushed brushed chrome chrome
5-20BK-4 5-20BK-4
.470 [11.94] [11.94] .470
.870 [22.10] [22.10] .870
.870 [22.10] [22.10] .870
1.250 [31.75] 1.250 [31.75]
die zinc die cast cast zinc
matte black matte black
5-20CH-4 5-20CH-4
.470 [11.94] [11.94] .470
.870 [22.10] [22.10] .870
.870 [22.10] [22.10] .870
1.250 [31.75] 1.250 [31.75]
die zinc die cast cast zinc
polished polished chrome chrome
5-20SS-4 5-2055-4
.470 [11.94] [11.94] .470
.870 [22.10] [22.10] .870
.870 [22.10] [22.10] .870
1.250 [31.75] 1.250 [31.75]
304SS 304SS
passivated passivated
gasketavailable available and and sold sold separately separately (part I gasket (part no. no. 5-25G) 5-25G) straightsteel, steel,zinc zinc plated platedcam cam also also available available (part see pg. pg. 115 115 5C11) see I straight (part no. no. 5C11) die cast cast zinc zinc I die includes: I includes: (1) reversible reversible cam cam I (1) OFFSET OUT GRIP (1) body I (1) body nut nut (2) jam jam nuts I (2) nuts OFFSET OFFSET IN IN GRIP GRIP (2) lock lock washers I (2) washers 1.28 32.5 1.28[32.5] .75 [19.1] 19.1 .75
1.34 [34.0] 34.0 1.34 .25 6.4 SQ. SQ. -....-.25[6.4]
LIFT AK.) TlIJMN
A A .22 [5.6] 5.6 .22 COMPRESSION COMPRESSION 2.32 58.8
2.22 [56.3] 56.3 2.22
1.49 [37.9] 37.9 1.49
.640 16.26 -•-.640[16.26]
.52 13.2 TOP FRAME
DOOR .93 [23.6] [23.6] OFFSET OFFSET IN .93 IN 1.10 [27.9] OFFSET OUT .540 13.72 .540[13.72]
SIDE FRAME 41 O
.93 [23.6] [23.6] OFFSET OFFSET IN IN .93 1.10 [27.9] OFFSET OUT
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
118 118
Request Info
Download 31:Immo @ Download @ www.spep.com www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
VIEW A VIEW A
SHAFT END END SHAFT
M8 THD.
Hinges and Hinges and Industrial industrial Hardware bfrrdWare
Offset In Grip Grip Offset In Min. Min.
Offset Out Out Grip Grip Offset
Max. Max.
Min. Min.
Max Max
Material Material
Finish Finish
5-25BC 5-25BC
no no cam cam
no no cam cam
die zinc die cast cast zinc
brushed brushed chrome chrome
5-25BK 5-25BK
no no cam cam
no no cam cam
die zinc die cast cast zinc
matte black matte black
die zinc die cast cast zinc
polished polished chrome chrome
5-25CH 5-25CH
no no cam cam
no no cam cam
5-25BC-12 5-25BC-12
0.0 [0] [0] 0.0
.20 [5.1] [5.1] .20
1.77 [45.0] 1.77 [45.0]
2.16 [54.9] [54.9] 2.16
die brushedchrome chrome die cast castzinc zinc brushed
5-25BK-12 5-25BK-12
0.0 [0] [0] 0.0
.20 [5.1] [5.1] .20
1.77 [45.0] 1.77 [45.0]
2.16 [54.9] [54.9] 2.16
die zinc die cast cast zinc
5-25CH-12 5-25CH-12
0.0 [0] [0] 0.0
.20 [5.1] [5.1] .20
1.77 [45.0] 1.77 [45.0]
2.16 [54.9] [54.9] 2.16
die polishedchrome chrome die cast castzinc zinc polished
5-25BC-8 5-25BC-8
.20 [5.1] [5.1] .20
.59 [15.0] [15.0] .59
1.37 [34.8] 137 [34.8]
1.77 [45.0] [45.0] 1.77
die brushedchrome chrome die cast castzinc zinc brushed
5-25BK-8 5-25BK-8
.20 [5.1] [5.1] .20
.59 [15.0] [15.0] .59
1.37 [34.8] 137 [34.8]
1.77 [45.0] [45.0] 1.77
die zinc die cast cast zinc
5-25CH-8 5-25CH-8
.20 [5.1] [5.1] .20
.59 [15.0] [15.0] .59
1.37 [34.8] 137 [34.8]
1.77 [45.0] [45.0] 1.77
die polishedchrome chrome die cast castzinc zinc polished
5-25BC-4 5-25BC-4
.59 [15.0] [15.0] .59
.98 [24.9] [24.9] .98
.98 [24.9] [24.9] .98
1.37 [34.8] [34.8] 1.37
die brushedchrome chrome die cast castzinc zinc brushed
5-25BK-4 5-25BK-4
.59 [15.0] [15.0] .59
.98 [24.9] [24.9] .98
.98 [24.9] [24.9] .98
1.37 [34.8] [34.8] 1.37
die zinc die cast cast zinc
5-25CH-4 5-25CH-4
.59 [15.0] [15.0] .59
.98 [24.9] [24.9] .98
.98 [24.9] [24.9] .98
1.37 [34.8] [34.8] 1.37
die polishedchrome chrome die cast castzinc zinc polished
includes: I includes: (1) reversible reversible cam cam I (1) (1) body I (1) body nut nut (2) jam jam nuts I (2) nuts (2) lock lock washers I (2) washers (1) gasket gasket I (1) internal O-ring I internal 0-ring
Latches
Medium Pull Action Lift and Medium Pull Action Lift and Turn TurnCompression Compression Latches Latches Part Part Number Number
matte black matte black
matte black matte black
matte black matte black
straightsteel, steel,zinc zinc plated plated cam cam also also available available I straight (part see pg. pg. 115 115 (part no. no. 5C11) 5C11) see die cast cast zinc zinc I die
OFFSET OUT OUT GRIP GRIP OFFSET OFFSET IN GRIP GRIP OFFSET IN
1.26 32.0
.75 19.1 .75[19.1]
1.34 34.0 1.34[34.0] .25 6.4 SQ. SQ. -.-.25[8.4] •A A
M8 M8 THD. THD. VIEW A VIEW A SHAFT END SHAFT END
3.10 78.7
.22 5.6
1.65 42.0
3.00 76.1
.62 15.7
COMPRESSION COMPRESSION
.640 16.26 --.-.640[16.26] TOP FRAME FRAME TOP
DOOR DOOR
.93 [23.6] OFFSET OFFSET IN IN .93 [23.6] 1.10 [27.9] OFFSET OFFSET OUT OUT 1.10 [27.9] .540 13.72 .540[13.72]
I SIDE FRAME
.93 [23.6] OFFSET OFFSET IN IN .93 [23.6] 1.10 [27.9] OFFSET OFFSET OUT OUT 1.10 [27.9]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
119 119
Latches
SIEPF91 PACIFIC ENGINE ,---,3 AND PRODUCTS
Small Compression Latches Small Compression Latches
NEMA NEMA
12
4
IP65
RATED
Part Number Part Number
Grip Grip Range Range
16.0 .63 [16.0]
FRAME F
+.010
Thumb Turn Turn Thumb
+ )
+.25
.625 - .000 15.88 .00 0.62532[15.88181
MOUNTING DIMENSIONS
Slotted Slotted
Hex Hex Socket Socket
Max. Max.
.13 [3.2] [3.2] .13
.25 [6.4] [6.4] .25
3-10BK01 3-10BK01
3-11BK01 3-11BK01
3-12BK01 3-12BK01
3-13BK01 3-13BK01
3-14BK01 3-14BK01
.25 [6.4] [6.4] .25
.38 [9.5] 38 [9.5]
3-10BK02 3-10BK02
3-11BK02 3-11BK02
3-12BK02 3-12BK02
3-13BK02 3-13BK02
3-14BK02 3-14BK02
.38 [9.5] [9.5] .38
.50 [12.7] [12.7] .50
3-10BK03 3-10BK03
3-11BK03 3-11BK03
3-12BK03 3-12BK03
3-13BK03 3-13BK03
3-14BK03 3-14BK03
.50 [12.7] [12.7] .50
.63 [15.9] [15.9] .63
3-10BK04 3-10BK04
3-11BK04 3-11BK04
3-12BK04 3-12BK04
3-13BK04 3-13BK04
3-14BK04 3-14BK04
.63 [15.9] [15.9] .63
.75 [19.0] [19.0] .75
3-10BK05 3-10BK05
3-11BK05 3-11BK05
3-12BK05 3-12BK05
3-13BK05 3-13BK05
3-14BK05 3-14BK05
.75 [19.0] [19.0] .75
.88 [22.2] [22.2] .88
3-10BK06 3-10BK06
3-11BK06 3-11BK06
3-12BK06 3-12BK06
3-13BK06 3-13BK06
3-14BK06 3-14BK06
.88 [22.2] [22.2] .88
1.00 [25.4] [25.4] 1.00
3-10BK07 3-10BK07
3-11BK07 3-11BK07
3-12BK07 3-12BK07
3-13BK07 3-13BK07
3-14BK07 3-14BK07
1.00 [25.4] [25.4] 1.00
1.13 [28.6] [28.6] 1.13
3-10BK08 3-10BKOB
3-11BK08 3-11BKOB
3-12BK08 3-12BK08
3-13BK08 3-13BK08
3-14BK08 3-14BK08
NOTE: standard standard 5/32" 5/32" or or 4mm 4mm Allen Allen wrench wrench hex hex I NOTE: tool to used for for the recessed hex hex lock lock tool to be be used the recessed
includes: I includes: (1) body body lock lock washer I (1) washer (1) body I (1) body mounting mounting nut nut (1) cam I (1) cam (2) cam I (2) cam lock lock washers washers (2) cam cam mounting I (2) mounting nuts nuts die cast cast zinc zinc I die finish: black I finish: black powder powder coated coated griprange rangeshown shownisis in in locked locked position I grip position achievesNEMA NEMA type 4, 12 IP65 I achieves type 4, 12 and and IP65
DOOR DOOR +.25 +.010 .531 - .000 [13.5011 .6311 00 13.50 .00
Recessed Hex Recessed Hex
Recessed Recessed Tubular Tubular
Min. Min.
NOTE: standard standard thin thin wall I NOTE: wall 5/16" 5/1e. or or 8mm 8mm hex hex socket tool for the hex socket socket lock. lock. socket tool to to be be used used for the hex
1.50 38.2 .48 12.1 .48[ 12.1]
FRAME FRAME
GRIP RANGE
BODY LOCKWASHER LOCKWASHER BODY
.12 3.1 90° 90° ROTATION ROTATION
DOOR .69±.06 17.5±1.5 .69±.06[17.5±1.5 DOOR +.010
(2) LOCKWASHERS LOCKWASHERS (2)
M16 x 1.5 THD. .91 23.0 .91[23.0]
+.25
.625 - .000 15.88 .625!V0[ 15.8818 .00
i[
M6 THREAD THREAD M6
ALIGNMENT ALIGNMENT INDICATORS INDICATORS
CAM CAM IN IN OPEN OPEN POSITION POSITION +.25 +.010 .531 - .000 13.49 .5311-a 3.4918] .00
.87 22.0 0 .87[22.0]
.17 4.3 ] .17[4.3 COMPRESSION COMPRESSION (2) CAM NUTS
.24 6.0
BODY NUT
.84 21.4
MOUNTING DIMENSIONS DIMENSIONS
Key for Recessed Tubular Key for Recessed Tubular Lock Lock Part Number Part Number
3-13K 3-13K
.86 21.8
Part Number Part Number
KH37BK-01 KH37BK-01
1.57 40.0 1.07 27.1
part part no. no.
120 120
Finish Finish
steel steel
nickel nickel plated plated
Black Finger Pulls Black Finger Pulls
.22 5.5
KH37BK KH37BK
KH37BK KH37BK
Material Material
Description Description
Material Material
in-line in-line
black black nylon nylon
perpendicular perpendicular
black black nylon nylon
texturedfinish finish I textured
part part no. no.
KH37BK-01 KH37BK-01
Download 31:Immo @ Download @www.spep.com www.spep.com
1.02 25.8
.72 18.2 .72[18.2
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industrial Hardware bfrrdWare NEMA NEMA
4
Large Compression Compression Latches Latches 12 1,117, Large
Features Features die cast cast zinc zinc I die finish: black I finish: black powder powder coated coated I grip griprange rangeshown shownisis in in locked locked position position achievesNEMA NEMA type 12 and and IP65 IP65 I achieves type 4, 4,12 1.37[34.9] [34.9] O.D. O.D. xx.13 .13 [3.2] I 1.37 [3.2]thick thicksteel steelzinc zincplated plated spacer spacer (sold (sold separately separately as as part part no. no. KH45) KH45)
includes: I includes: (1) body body lock lock washer I (1) washer (1) body body mounting I (1) mounting nut nut (1) cam cam I (1) ►(2)cam (2)cam lock lock washers washers (2) cam cam mounting I (2) mounting nuts nuts
Latches
316SS
.44
Part Part Number Number
09*
Grip Range Grip Range 1111111 available In in 316SS 316SS available
Non-Locking ThumbTurn Turn Non-LockingTT Thumb
8mm 3mm 8mm 3mm Recessed DoubleBitted Bitted RecessedHex Hex Double
Locking T Locking T
7mm 7mm
Spacer Spacer
Min. Min.
Max. Max.
.45 [11.4] [11.4] .45
1.07 [27.2] [27.2] 1.07
4-10BK15 4-10BK15
4-11BK15 4-11BK15
4-12BK15 4-12BK15
4-13BK15 4-13BK15
4-14BK15 4-14BK15
4-15BK15 4-15BK15
1.00 [25.4] 1.62[41.1] [41.1] 1.00 [25.4] 1.62
4-10BK10 4-10BK10
4-11BK10 4-11BK10
4-12BK10 4-12BK10
4-13BK10 4-13BK10
4-14BK10 4-14BK10
4-15BK10 4-15BK10
1.53 [38.9] 2.15[54.6] [54.6] 1.53 [38.9] 2.15
4-10BK05 4-10BK05
4-11BK05 4-11BK05
4-12BK05 4-12BK05
4-13BK05 4-13BK05
4-14BK05 4-14BK05
4-15BK05 4-15BK05
2.07 2.69[68.3] [68.3] 2.07 [52.6] [52.6] 2.69
4-10BK10 4-10BK10
4-11BK10 4-11BK10
4-12BK10 4-12BK10
4-13BK10 4-13BK10
4-14BK10 4-14BK10
4-15BK10 4-15BK10
Part KH45 PartNo. No. KH45
2.61 3.00[76.2] [76.2] 2.61[66.3] [663] 3.00
4-10BK15 4-10BK15
4-11BK15 4-11BK15
4-12BK15 4-12BK15
4-13BK15 4-13BK15
4-14BK15 4-14BK15
4-15BK15 4-15BK15
sold separately separately I sold
Triangle Triangle
NOTE: non-locking T- latches finish: I NOTE: non-locking Tlatches are are also also available available in in 316SS 316SSmaterial materialwith withhand hand polished polished finish: 4-10SSTP05, 4-10SSTP10, 4-1055TP05, 4-1055TP10, 4-10SSTP15 4-1055TP15
Black Pull Black Finger Finger Pull
9
Part Part Number Number Grip Range Grip Range
7mm 7mm Square Square
Slotted Slotted
Recessed Recessed Tubular Tubular
8mm 8mm Square Square
Bellcore Bellcore 216 216
Min. Min.
Max. Max.
.45 [11.4] [11.4] .45
1.07 [27.2] [27.2] 1.07
4-16BK15 4-16BK15
4-17BK15 4-17BK15
4-18BK15 4-18BK15
4-19BK15 4-19BK15
4-21BK15 4-21BK15
4-22BK15 4-22BK15
1.00 [25.4] [25.4] 1.00
1.62 [41.1] [41.1] 1.62
4-16BK10 4-16BK10
4-17BK10 4-17BK10
4-18BK10 4-18BK10
4-19BK10 4-19BK10
4-21BK10 4-21BK10
4-22BK10 4-22BK10
1.53 [38.9] [38.9] 1.53
2.15 [54.6] [54.6] 2.15
4-16BK05 4-16BK05
4-17BK05 4-17BK05
4-18BK05 4-18BK05
4-19BK05 4-19BK05
4-21BK05 4-21BK05
4-22BK05 4-22BK05
2.07 [52.6] 2.07 [52.6]
2.69 [68.3] [68.3] 2.69
4-16BK10 4-16BK10
4-17BK10 4-17BK10
4-18BK10 4-18BK10
4-19BK10 4-19BK10
4-21BK10 4-21BK10
4-22BK10 4-22BK10
2.61 [66.3] 2.61 [66.3]
3.00 [76.2] [76.2] 3.00
4-16BK15 4-16BK15
4-17BK15 4-17BK15
4-18BK15 4-18BK15
4-19BK15 4-19BK15
4-21BK15 4-21BK15
4-22BK15 4-22BK15
NOTE: gasket available separately X174-01) I NOTE: gasket available separately (part (part no. no. X174-01)
seepg. pg.87 87 for for details I see details Padlock Cup Padlock Cup
FRAME
Part KH30BK PartNo. No. KH3OBK
Key Key For ForRecessed Recessed Plugs Plugs Part Part Numbers Numbers
Part KH38BK PartNo. No. KH38BK
Bellcore Bellcore Electronics Electronics
Key Key Style Style
4-14K 4-14K
3mm double 3mm double bitted bitted
4-15K 4-15K
7mm 7mm triangle triangle
4-16K 4-16K
7mm square 7mm square
4-18K 4-18K
recessed recessed tubular tubular
4-19K 4-19K
8mm square 8mm square
4-21K 4-21K
Bellcore Bellcore 216 216
4-22K 4-22K
Bellcore Bellcore electronics electronics
.938 23.81
seepg. pg.87 87for for details details & & I see stainless steel stainless steel option option
DOOR .750 19.05
.750 19.05
.885 22.48
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
2.52 64.0 2.52[64.0]
.65 16.6 .65[16.6]
GRIP RANGE GRIP RANGE .19 4.8
CAM CAM
BODY BODY LOCKWASHER LOCKWASHER
90° 90° ROTATION ROTATION 1.31 33.3 1.31[33.3]
CAM CAM IN IN OPEN OPEN POSITION POSITION
Request Info
1-800-453-1692 www.aboveboardelectronics.com
M10 THD. M10 xx 1.5 1.5 THD.
‘...,
ALIGNMENT ALIGNMENT INDICATORS INDICATORS
(2) LOCKWASHERS (2) LOCKWASHERS
BODY BODY NUT NUT
111:1 I Al' 1 1 . •1. mil Iiii !i!i!il e!i!:!:!.!.!.!M • • (2) CAM NUTS (2) CAM NUTS
1.13[ 28.7] 28.7 171.13
.25 6.4
1.26 32.0
.26 6.6 COMPRESSION COMPRESSION
M22 THD. M22 xx 1.5 1.5 THD.
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order: ta 800.433.5554
121 121
Latches
SIERRA PACIFY' -VGINEERING PRODUCTS
Compression Latches Latches with with Long Long Body Compression Body
NEMA NEMA /P65
12
4
RATED
Part Part Numbers Numbers
Grip Range Grip Range Min. Min.
Max Max
4-53BK15 4-53BK15
8mm Hex 8mm Recessed Recessed Hex
1.55 [39.4] [39.4] 1.55
2.17 [55.1] 2.17 [55.1]
4-53BK10 4-53BK10
2.10 [53.3] 2.10 [53.3]
2.72 [69.1] 2.72 [69.1]
4-53BK05 4-53BK05
2.63 [66.8] 2.63 [66.8]
3.25 [82.6] [82.6] 3.25
die cast cast zinc zinc I die finish: black black powder I finish: powder coated coated grip range shown is is in I grip range shown in locked locked position position achievesNEMA NEMA type 12 and and IP65 IP65 I achieves type 4, 4,12 1.38[35.0] [35.0]O.D. O.D. xx .125 I 138 .125 [28.58] [28.58]thick thicksteel, steel,zinc zincplated plated spacer spacer (sold (sold separately separately as as part part no. no. KH45) KH45)
.65 16.6 .65[16.6]
3.62 91.9 3.62[91.9] GRIP GRIP RANGE RANGE
CAM CAM 90° 90° ROTATION ROTATION
M22 xx 1.5 1.5 THD. THD. M22
BODY LOCK BODY LOCK WASHER WASHER
1.31 33.3 1.31[33.3]
I
ALIGNMENT ALIGNMENT INDICATORS INDICATORS CAM IN OPEN OPEN CAM IN POSITION POSITION
1.13 28.7 .7] .13[ 28 01
.19 4.8 - -4-.19[4.8]
BODY NUT BODY NUT
I
FRAME FRAME
(2) CAM CAM (2) NUTS NUTS
le: ItsHO III . SPEP.COM 1
.750 19.05 .750[19.05]
:,,A1 I-
:,,
M10 xx 1.5 M10 1.5 THD. THD.
.25 6.4 .25[6.4
DOOR
.26 6.6 .26[6.6] .938 23.81 .938[23.81] COMPRESSION COMPRESSION
2.36 59.9 2.36[59.9]
.750 19.05 .750[19.05]
.885 22.48 0.885[22.48]
(2) LOCK LOCK WASHERS WASHERS (2)
MOUNTING DIMENSIONS
Compression Latches Latches with Compression with Three-hole Three-hole Mounting Mounting
NEMA NEMA IP65
4
12
RATED
Part Part Numbers Numbers Key Key Locking T Locking T
non-locking non-locking
locking locking
Recessed Recessed Tubular Tubular
1.55 39.4 1.55[39.4]
OPP
GRIP RANGE RANGE GRIP .03 .8 .03181 GASKET GASKET
Non-Locking T Non-Locking T
Min. Min.
Max Max
4-32BK15 4-32BK15
4-30BK15 4-30BK15
4-38BK15 4-38BK15
.29 .29 [7.9] [7.9]
.91 .91 [23.6] [23.6]
4-32BK10 4-32BK10
4-30BK10 4-30BK10
4-38BK10 4-38BK10
.84 .84 [21.8] [21.8]
[37.3] [37.3]
4-32BK05 4-32BK05
4-30BK05 4-30BK05
4-38BK05 4-38BK05
1.38 138 [25.3] [25.3]
2.00 2.00 [50.8] [50.8]
4-32BK10 4-32BK10
4-30BK10 4-30BK10
4-38BK10 4-38BK10
1.90 1.90 [49.0] [49.0]
[64.8] [64.8]
4-32BK15 4-32BK15
4-30BK15 4-30BK15
4-38BK15 4-38BK15
2.44 2.44 [62.7] [62.7]
3.06 3.06 [76.2] [76.2]
die cast cast zinc zinc I die finish: black black I finish: griprange rangeshown shown in in closed closed position position I grip achievesNEMA NEMA type 4, 12, 12, and IP65 I achieves type 4, and IP65 recessed tubular tubular latches latches do I recessed do not not include include keys keys but but can can be be purchased purchased separately as 4-18K separately as part part number number 4-18K key locking locking latches latches include I key include (2) (2) CH751 CH751ringed ringed keys keys .187 4.75 THK. THK.
1.45 1.45
2.52 2.52
includes: I includes: (1) handle I (1) handle (2) mounting screws I (2) mounting screws (2) jam jam nuts I (2) nuts (2) lock lock washers I (2) washers (1) cam cam I (1) (1) gasket gasket I (1)
FRAME
1.00 25.3 01.00[25.3]
90° 90° ROTATION ROTATION
RECESSED TUBULAR RECESSED TUBULAR OPTION OPTION
.16 4.1 MAX. MAX. .16[4.1] THICKNESS THICKNESS
1.31 33.3 1.31[33.3]
.80 20.3 .80[20.3]
3.13[79.4] 3.13 79.4 LOCKING T T LOCKING OPTION OPTION
Download 31:Immo @ Download @www.spep.com www.spep.com
DOOR .94 23.8
.188 4.76 (2) HOLES
6.4 .25[6.4] -a-.25 COMPRESSION COMPRESSION
CAM IN OPEN POSITION
122 122
Grip Grip Range Range Recessed Recessed Tubular Tubular
.42 10.7 .42[10.7] 1.41 35.7 1.41[35.7]-
1.14 28.8 1.14[28.8]
.781 19.84 .63 15.9
.63 15.9
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
2.41 61.2 2.41[61.2]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industri -1 Hardware Hardware
Material Material
Finish Finish
2053ZN 2053ZN
steel steel
zinc plated zinc plated
2053SS 205355
304SS 304SS
electropolished electropolished
.438 11.13 .498[11.19]
.31 7.9 .31 [7.9]
.88 [22.2] 22.2 .88 .53 [13.5] 13.5 .53
.06 1.5 .06[1.5]
.130 [3.30] 3.30 0.130 (2) HOLES HOLES (2)
.56 14.3 .56 [14.3]
.130 3.30 HOLE HOLE 0.190[9.90] (2) PLCS. (2) PLCS.
.146 3.71 HOLE HOLE 0.146[071] (2) PLCS. (2) PLCS. .531 13 13.49 .591] AS
tot
51.9 2.05 [51.9] 2.05 .44 11.1 .44[11.1]
.146 3.70 0.146[3.70] (2) HOLES HOLES (2)
1.59 40.4 -1.67 - 1.67 [[ 42.4 42.4 ]] 1.59[40.4] FOR APPROX. TENSION FOR APPROX TENSION OF 30 - 50LBS. LBS. 0F30-50
.08 [2.0] 2.0 .08
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Latches
Small Small Compression Compression Pull Pull Down Down Catch Catch and and Keeper Keeper Part Number Part Number
.50 [12.7] 12.7 .50
Small Small Compression Compression Pull Pull Down Down Catch Catch with with Padlock Padlock Eye Eye and and Keeper Keeper Part Number Part Number
Material Material
Finish Finish
2054ZN 2054ZN
steel steel
zinc plated zinc plated
2054SS 205455
304SS 304SS
electropolished electropolished
.31 [7.9] 7.9 .31
.88 [22.2] 22.2 .88
.06 1.5 .06[1.5]
.53 13.5 .53[13.5]
.130 [3.30] 3.30 0.130 (2) HOLES HOLES (2)
.56 14.3 .56 [14.3] 1.016 25.81 1.016[2 5.81 ]
.130 3.30 HOLE HOLE 0.130[3.30] (2) PLCS. (2) PLCS.
.157 3.99 HOLE HOLE 0.157[3.99] (2) (2) PLCS. PLCS. .531 53 [ 13.49 3.49]
2.65 67.3 1.02 [25.8] 25.8 1.02
1.61 40.9 -- 1.69 1.69 [[ 42.9 42.9 ]] 1.61[40.9] FOR APPROX. APPROX. TENSION TENSION FOR OF 30 30 -- 50 OF 50 LBS. LBS.
.322 8.18
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
.50 12.7 .50[12.7]
.08[2.0] 2.0 k- .08
.157 [4.00] 4.00 0.157 (2) HOLES
Large Compression Compression Pull Large Pull Down Down Catch Catch and and Keeper Keeper Material Material
Finish Finish
2055ZN 2055ZN
Part Number Part Number
steel steel
zinc plated zinc plated
.54 [13.7] 13.7
1.02 25.9
2055SS 205555
304SS 304SS
electropolished electropolished
.08 [2.0] 2.0 .08
.56 14.3
.93 23.5 .560 14.22 .580[14.22]
.560 14.22 .580[14.22]
0 0 0
.217 5.51 HOLE HOLE 0.217[5.51] (5) PLCS.
.563 14.30 .583[14.30]
0
2.74 [69.5] 69.5 2.74 .56 14.2
1.87 [ 47.5 ] 1.79 45.5 -- 1.87 1.79[45.5] APPROX. TENSION TENSION FOR APPROX 100 LBS. OF 75 75 --100
.56 14.2 .217 [5.50] 5.50 0.217 (5) HOLES HOLES (5)
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Part Number Part Number
.10 [2.5] 2.5 .10
Material Material
Finish Finish
304SS 304SS
passivated passivated
2064SS 206455
CD
.65 16.4 .65 [16.4]
Spring Pull Latch Latch with Safety Catch Catch Spring Loaded Loaded Draw Draw Pull with Safety .79 20.0 79[20.0] CENT. CENT.
.45 11.4 .45[11.4]
built-in safety catch spring loaded r spring waueu
.47 12.0 .47[120] 1.36 34.5 .69 17.5 .89] 7.5]
42.4 --1.77 1.77 [45.0] 1.67 [42.4] MOUNTING DISTANCE
1.67 [42.5] 1.77 [45.0] [45.0] 1.67 [42.5]-1.77 MOUNTING DISTANCE MOUNTING DISTANCE 1.41 35.8
.1969 [560] 5.00 0.1969 (6) HOLES HOLES (6)
CD
.79 20.1 .79[20.1] TYP.
.98 [25.o] 25.0 1.78 45.3
.98 25.0 .98[2.5.9] MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Request Info
.197 5.00 HOLES HOLES O.197[5.00] (6) PLCS. PLCS. (6)
.47 12.0 .47[12.0]
SAFETY CATCH
1-800-453-1692 www.aboveboardelectronics.com
.87 22.0 .87[22.0]
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
123
Latches
SIERRA PACIFY' IGINEERING AND PRODUCTS
Tension Draw Tension Draw Latch Latch .79 20.0 .79[20.0] .39 10.0 .39[10.0] CENT. A
.20 5.0 28[5.0]
Part Number Part Number
.79 20.0 .39 10.0 CENT.
A
.126 3.20 HOLE HOLE WITH 0.128[320] WITH 3.20 HOLE WITH .126 .275 [7.00] x 90.275 C'SINK 0.275 [1.00]x90' MINK [7.00] x 90 C'SINK (2) PLACES (2) PLACES .49 12.5 .49[12.5]
.35 [8.8] 8.8 .35
.35 8.8
.079 [2.00] 2.00
.079 2.00
.39 10.0
(2) HOLES
.63 [18.0] 16.0 .83
A
1.49 37.8
barrel barrel polished polished
.39 10.0
.126 [3.20] (2) HOLES .88 22.4
.88 22.4
.63 16.0
.63 16.0
.63 16.0
.047 1.20 .047[120] .57 14.5 .57[14.5] .57
A
1.49 37.8 -.-1.49[37.8
304SS 304SS
spring loaded loaded I spring
.49 12.5
2.18 55.3
Finish Finish
2070SS 207055
.20 5.0
.126 [320] [3.20] 0.126
55.3 2.18 [55.3]
Material Material
.047 1.20
.126 3.20 (4) HOLES
14.5
.126 3.20 (4) HOLES
MOUNTING DIMENSIONS MOUNTING DIMENSIONS MOUNTING DIMENSIONS
SECTION A-A SECTION A-A SECTION A-A
Tension Draw Tension Draw Latch Latch Part Number Part Number
20.0 .79 [20.o] 10.0 .39 [10.0] CENT.
.1260 [3200] 3.200 HOLE HOLE WITH 0.1280 MTH .79 20.0 .276 [7.00] xx 90 90 • CISINK C'SINK .39 10.00.278 (2) PLACES .49 12.5 .49[12.5] CENT. A .1260 3.200 HOLE WITH
I 5.0 .20 [5.0]
.276 [7.00] x 90 C'SINK (2) PLACES
.079 2.00 x.079[2.00]
304SS 304SS
barrel barrel polished polished
.35 8.8 .079 2.00
blackPC PC cover cover I black .39 10.0 spring loaded I spring loaded
.49 12.5
.20 5.0
10.0 .39 [10.0]
.126 [3.20] 0.128[3.20] (2) HOLES
.91 23.0 .126 [3.20] (2) HOLES
2.53 64.2 16.0 .63 [16.0]
.63 16.0
.91 23.0 91[23.0]
2.53 64.2 A
Finish Finish
2071SS 207155
.35 [8.8] 8.8
A
Material Material
.63 16.0 MOUNTING DIMENSIONS
.039 1.00 .039 [1.00] -4,-
.63 16.0 .83[18.0]
.126 3.20 (4) HOLES
14.5 .57 [14.5]
1.71 43.3 A
.039 1.00 SECTION A-A SECTION A-A
.126 3.20 0.128[3.20] (4) HOLES HOLES (4)
Part Number Part Number
Material Material
Finish Finish
304SS 304SS
barrel barrel polished polished
.57 14.5
1.71 43.3
Tension Draw Latch Tension Draw Latch CD
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
SECTION A-A
.53 [13.5] 13.5 .53
2067SS 206755
.31 [8.0] 8.0 .31 .53 13.5 CENT.
.134 [3.40] [3.40] HOLE W/ 0.134 WI .154 [3.90] 3.90 x 90 CSINK C'SINK 0.154 (4) PLACES .134 [3.40] HOLE W/
.31A 8.0 CENT. A
1.00 .039 [1.00] KEEPER THK.
.039 1.00 KEEPER THK. 10.6 .42 [10.6]
.154 3.90 x 90 C'SINK (4) PLACES
.12 [3.0] 3.0 .12
spring loaded loaded I spring .31 8.0 .31 [8.0] 8.0 .31
.42 10.6
.71 [18.0 8.0]
.12 3.0
.71 18.0
ED
.71 18.0
1.19 [30.1] 30.1 1.19
18.0 .71 71 [18.0]
23.0 .91 [23.0] .45 11.5 .45[ 1.5]
1.19 30.1
.45 11.5 .91 23.0 11.5 .45 [11.5]
.45 11.5 .80 .031 [.80] LATCH THK.
A .41 A
9.5 .37 [9.5]
.24 6.0 24 .80 [6.0] .031 LATCH THK.
.37 9.5
MOUNTING DIMENSIONS MOUNTING DIMENSIONS DIMENSIONS MOUNTING
.24 6.0
SECTION A-A SECTION A-A
Spring Pull Latch Spring Loaded Loaded Draw Draw Pull Latch
SECTION A-A
41D
Part Number Part Number A A-41-1
.047 1.20 .047[1.20]
.79 [20.0] 20.0 .79
Material Material
Finish Finish
steel steel
nickel nickel plated plated
2074N 2074N
springloaded loaded lever lever I spring
.51 [13.0] 13.0 .51 .43 [11.0] 11.0 .43
.39 [10.0] 10.0 .39
12.0 .47 [12.0]
.39 [10.0] 10.0 .39
.55 [14.0] 14.0 .55 .165 [4.20] 4.20 HOLE HOLE WITH WITH 0.165 .256 [6.50] [6.50] xx 90° 90° CSINK C'SINK 0.256 (4) PLACES, PLACES, FARSIDE FARSIDE (4)
23.0 .91 [23.0] .91 2.13 54.1 .59 [15.0] 15.0 .59
A
.85 [21.5] 21.5 .85
124 124
Download www.spep.com Download3DmoDELs @ @ www.spep.com
.59 [15.0] 15.0 .59
.047[1.20] 1.20 THK. THK. [•- .047 SECTION A-A SECTION A-A
.165 4.19 0.165[4.19] (4) HOLES HOLES (4) MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industrial Hardware Hardware
2069SS 206955
Material Material
Finish Finish
304SS 304SS
barrel barrel polished polished
latchedor orunlatched unlatched condition conditioncan can be be verified I latched verified with built-in built-in indicator indicator with redindicates indicates unlatched unlatched I red green green indicates indicates latched latched spring loaded ► spring loaded .31 7.8
.79 20.0 .39 [10.0] 10.0 .39 CENT
6.10 HOLE .240 [6.10] HOLE WITH 0.240 .335 [8.50] [8.50] xx90 C'SINK 0.335 90 CSINK (2) PLACES
A
.31 [7.8] 7.8 •-•.,-.31
.39 [10.0] 10.0 .39
.66 16.8
ED
.059 1.50
.39 10.0
.66 [16.8] 16.8 .66
.24 [6.0] 6.0 .24 TRAVEL RANGE RANGE
e
Latches
Spring LoadedPull PullDown DownLatch Latch (1 4D Spring Loaded Part Part Number Number
.059[1.50] 1.50 -1 H.059
.22 [5.5] 5.5 .22
.87 .01 22.0 .2 .87 .01 [22.0±.2] 22.0 .2 .87±.01
.259 [6.60] HOLE WITH .335 [8.50] x 90 C'SINK (2) PLACES
.259[6.60] [6.60] HOLE HOLE WITH 0.259 .335 [8.50] [8.50] xx 90 C'SINK 0.335 90 CSINK (2) PLACES
INDICATOR GREEN-LOCKED GREEN-LOCKED RED-UNLOCKED 2.56 65.0] 65.0 2.56[
.83 .00 21.0 .1
21.0 .1 .83 .00 [21.0±.1] .83±.00
.83 21.0 .83[21.0]
.83 21.0 .047 1.20 .047[1.20]
A
28.0 1.10 [28.0] 1.10
.047 1.20
.45 11.4 .45[11.4]
MOUNTING DIMENSIONS
MOUNTING DIMENSIONS DIMENSIONS
.45 11.4
SECTION A-A
SECTION A-A
Spring LoadedPull PullDown DownLatch Latch MI Spring Loaded Part Description Material Material PartNumber Number Description
233SS 23355
latch latch and and keeper keeper
Finish Finish barrel barrel polished polished
316SS 316SS
concealed keeper keeper I concealed spring loaded ► spring loaded
.31 8.0
Ø.126 3.20 HOLE HOLE WITH WITH Ø.126 3.20 HOLE WITH 9.126[3.20] .31 8.0 .31[8.0] -1 r- Ø.236 [6.00] x 90° Ø.236 [6.00] xx90° 90° C'SINK C'SINK C'SINK 9.236 [6.00] (2) PLACES (2) PLACES .35 9.0
.35 9.0 0.35[9.0] 17.0 .67 [17.0]
.67 17.0 .669 17.00 -.669[17.00]
.669 17.00
.53 13.4
.53 13.4 .53[13.4]
1.10 28.0
1.10 28.0 tio[28.0]
r
1.122 28.50 1.122[28.50]
1.122 28.50
.984 25.00 .984[25.00]
.984 25.00
1.11 28.3 2.64 67.0
.138 3.50 .138 3.50 0.138[3.50] (4) HOLES (4) HOLES
MOUNTING DIMENSIONS DIMENSIONS MOUNTING DIMENSIONS MOUNTING
2.64 67.0 2.64[67.0] .98 25.0
1
.98 [25.0] 25.0 .98
Ø.138 HOLE WITH WITH 3.50 HOLE Ø.138 3.50 HOLE WITH 9.138[3.50] Ø.232 [5.90] xx 90° 90° C'SINK C'SINK Ø.232 C'SINK 9.232 [5.90] 1.20[5.90] x 90° .047 [1.20] (2) PLACES, FARSIDE (2) PLACES, FARSIDE
.047 1.20 SIDE VIEW
1.11 28.3] 28.3 1.11
SIDE VIEW VIEW SIDE
BOTTOM VIEW VIEW BOTTOM VIEWBOTTOM
Spring Latch Spring Loaded Loaded Pull Pull Down Down Latch Part Description PartNumber Number Description
246SS 24655
latch latch and and keeper keeper
Material Material
Finish Finish
304SS 304SS
barrel barrel polished polished
Ø.256 6.50 HOLE HOLE WITH WITH 0.256[6.50] Ø.453 [11.50] [11.50] xx90° 90° C'SINK C'SINK 0.453 (2) PLACES PLACES (2)
10.5 .41 [10.5]
concealed keeper keeper I concealed spring loaded ► spring loaded
.55 13.9 1.06 27.0 1.06 [27.0] 1.063 [27.00] 27.00 1.063
.059 1.50 01 -1 r- 1.38 1.38[35.0] 35.0 TYP.
.77 19.5 .77[19.5]
1.56 39.5] 39.5 1.56
1.693 43.00] 43.00 1.693
.83 [21.0] 21.0 .83
.827 [21.00] 21.00 .827
.248 [6.30 6.30 0.248 (4) HOLES HOLES (4)
.354 [9.00] 9.00 xx .519 .519 [13.00] [13.00] .354 THRU ALL ALL OBROUND OBROUND THRU
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Request Info
SIDE VIEW VIEW SIDE
1-800-453-1692 www.aboveboardelectronics.com
IL
0
Ø.248 6.30 HOLE HOLE WITH WITH 0.248[6.30] Ø.417 [10.60] [10.60] xx90° 90° C'SINK 0.417 CSINK (2) PLACES PLACES (2) BOTTOM VIEW BOTTOM VIEW
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
125 125
Latches
SIERRA PACIFIC EM-
-ERING AND PRODUCTS
Over Center Center Latch Latch with Compression Spring Over with Compression Spring -- Tab Tab Straight Straight .149 3.78 (2) HOLES
.64 16.2 .64[16.2]
Part Number Part Number
2034SS-L 203455-L
Description Description
Material Material
Finish Finish
tab tab straight straight latch latch
304SS 304SS
passivated passivated
seepage page127 127for forkeeper keeper(sold (sold separately) separately) I se. 1.34 34.0
.83 21.1
.41 [10.5] 10.5 .41
1.13 28.7 FRONT VIEW FRONT VIEW
.56 14.3 REAR VIEW VIEW REAR
RIGHT RIGHT SIDE SIDE VIEW VIEW
Over Center Center Latch Latch with Compression Spring Spring -- Tab Over with Compression Tab Up Up .149 3.78 0.149[3.78] (2) HOLES (2) HOLES
.64 16.2 r .84[1 8.2 ]
Part Number Part Number
Description Description
Material Material
Finish Finish
2035SS-L 203555-L
tab up up latch tab latch
304SS 304SS
passivated passivated
seepage page127 127 for for keeper keeper (sold (sold separately) separately) I see 1.34 34.0 1.34[34.0]
.85 21.6 .85[21.6]
1.13 28.7
.50 12.6 .50[12.8]
FRONT VIEW FRONT VIEW
.56 14.3 .56[14.3]
RIGHT SIDE SIDE VIEW RIGHT VIEW
REAR REAR VIEW VIEW
Over Center Center Latch Latch with Compression Spring Over with Compression Spring -- Tab Tab Down Down
316SS
.149 3.78 0.149[3.78 (2) (2) HOLES HOLES
.64 16.2 84[18.2]
rr
1.34 34.0 1.34[34.0]
Part Number Part Number
Description Description
Material Material
Finish Finish
2036SS-L 203655-L
tab tab down down latch latch
304SS 304SS
passivated passivated
2036SS-L03 203655-L03
tab tab down down latch latch
316SS 316SS
passivated passivated
0
►see see page page 127 127 for for keeper keeper (sold (sold separately) separately)
II .85 21.6 .85[21.8]
.56 14.3 U .58[14.3]
.44 11.2 .44[11.2]
1.13 28.7 1.13[28.7]
FRONT VIEW1
RIGHT RIGHT SIDE SIDE VIEW VIEW
REAR REAR VIEW VIEW
Over Center Center Latch Latch with Compression Spring Spring -- Safety Catch Over with Compression Safety Catch .149 3.79 (2) HOLES
.64 16.2 .84[18.2]
Part Number Part Number
Description Description
Material Material
Finish Finish
2033SS-L 203355-L
tab up up latch tab latch
304SS 304SS
passivated passivated
2033SS-L01 203355-L01
tab up up latch tab latch
316SS 316SS
passivated passivated
tab tab down down latch latch
304SS 304SS
passivated passivated
2037SS-L 203755-L
1.34 34.0
seepage page127 127 for for keeper keeper (sold (sold separately) separately) I see .85 21.5 DETAIL VIEW DETAIL VIEW
1.13 28.7
.50 12.8
FRONT VIEW VIEW FRONT
.56 14.3
RIGHT SIDE RIGHT SIDE VIEW VIEW
REAR VIEW REAR VIEW
41
Over Center Center Latch Latch with Compression Spring Over with Compression Spring -- Safety Safety Slide Slide 16.2 84[18.2] ..64
1.3 32] 32 —,-—.-1.3]
1.34 34.0 1.304.0] SAFETY SAFETY SLIDE SLIDE
Part Number Part Number
Description Description
Material Material
Finish Finish
2038SS-L 203855-L
tab up up latch tab latch
304SS 304SS
passivated passivated
seepage page127 127 for for keeper keeper (sold (sold separately) separately) I see safetyslide slide prevents prevents latch latch from accidentally I safety from opening opening accidentally and may may be and be released released by by depressing depressing the the slide slide
1.03 26.3 1.03[28.3 .149 3.78 0.149[3.78] (2) HOLES (2) HOLES 1.13 28.7 1.13[28.7] FRONT VIEW FR fof'VIENI
126 126
Download www.spep.com Download3DmoDELs @ @ www.spep.com
.50 12.6 .50[12.8] RIGHT SIDE RIGHT SIDE VIEW VIEW
.56 14.3 .58[14.3] REAR VIEW VIEW REAR
Request Info
1-800-453-1692 www.aboveboardelectronics.com
REAR VIEW
Description Description
Material Material
Finish Finish
2032SS-L 203255-L
tab up up latch latch tab
304SS 304SS
passivated passivated
2032SS-L03 203255-L03
tab up up latch latch tab
316SS 316SS
passivated passivated
tab up up latch latch & & keeper tab keeper
304SS 304SS
passivated passivated
—.—, .84[16.2] .64 16.2
.91 23.2 91 [23.2]
.56 14.3
1.34 34.0
Latches
Compression Spring Springand andOver Over Center Center Latch Latch with Padlock Eye Eye Compression with Padlock
31655
2032SS 203255
Hinges and Hinges and Industrial industrial Hardware Hardware
RIGHT SIDE VIEW
FRONT VIEW
Part Part Number Number
.143 3.63 (2) HOLES
.28 7.0
.50 12.7
.400[ 10.16 10.16 ]] .400[ PADLOCK HOLE HOLE
seebelow belowfor for keeper keeper (sold (sold separately) separately) I see
.85 21.7
.149 3.79
.50 12.6 .50[ 12.6]
1.13 28.7
(2) HOLES HOLES
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONTVIEMI
REAR VIEW VIEW REAR
31655
Part Part Number Number
Description Description
Material Material
Finish Finish
2032SS-K 203255-K
keeper keeper
304SS 304SS
passivated passivated
2032SS-K01 203255-K01
keeper keeper
316SS 316SS
passivated passivated
seetable tablefor for the the distance distance that that relates relates to to the the desired desired tension tension I see
.059 1.50 THK.
.63 15.9 ] -4—.63[15.9
0 0
D
30 30 lbs. lbs.
1.813 [46.05] [46.05] 1.813
50 50 lbs. lbs.
1.875 [47.63] [47.63] 1.875
70 70 lbs. lbs.
1.938 [49.23] [49.23] 1.938
.19 4.8 .19[4.8] .143 3.63 0.143[3.63] (2) HOLES
.28 7.0 .28[70]H RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW
Desired Desired Tension Tension
.31 7.9 .31[7.9]
.62 15.8 .62[15.8
.50 12.7 ].5O[12.7]
Keepers Keepers
D
.149 3.78 HOLE HOLE 0.149[3.78] (2) PLACES
REAR VIEW VIEW REAR
.143 3.63 HOLE 95.143[363] (2) PLACES
.91 23.2
.64 .562[14.27] 16.2 14.27 .562
.56 14.3
.31 .313 7.94 3[72 4] MOUNTING DIMENSIONS MOUNTING DIMENSIONS
1.34 34.0 .400[ 10.16 ] PADLOCK HOLE
Part Part Number Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
2175 2175
Over Center Center Latch Latch Over .85 21.7
nomounting mountingholes, holes, welded welded in in place I no place
1.13 28.7
1.13 28.6 1.13[28.6]
.81 20.5 .51[20.5]
.50 12.6 RIGHT SIDE VIEW
FRONT VIEW
THK. .059 1.50 THK. .059[1.50]
.149 3.79 (2) HOLES REAR VIEW
.040 1.02 .040[1.02]
rir
.50 12.8 .50[12.8]
1.18 30.1 1.18[30.1]
1.13 28.8 1.13[28.8]
Over Center Center Latch Latch Kit Kit Over Part Part Number Number
2176 2176 2176-01 2176-01
Description Description
Material Material
Finish Finish
Padlocking Padlocking
latch latch
steel steel
clear clear zinc zinc
no no
latch latch
steel steel
clear clear zinc zinc
yes yes
2177 2177
mounting mounting plate plate
steel steel
mill mill
no no
2177-01 2177-01
mounting mounting plate plate
steel steel
mill mill
yes yes 2177
partssold sold separately separately I parts part no. no. 2177 welded in in place I part 2177 has has no no holes holes and and must must be be welded place part no. no. 2177-01 in place I part 2177-01 may may be be screwed screwed or or welded welded in place
2177-01 2176-01 2176-01
2176 2176
same dimensions dimensions as same as part shown below part no. no. 2178 2178 shown below
same dimensions dimensions as same as part shown above part no. no. 2175 2175 shown above
Over Center Eye Over Center Latch Latch with with Padlock Padlock Eye Part Part Number Number
Material Material
Finish Finish
2178ZN 2178ZN
steel steel
zinc plated zinc plated
2178SS 217855
304SS 304SS
passivated passivated
.84 21.4 84[21.4]
.149 3.79 0.149[3.79] (2) HOLES HOLES
.81 20.6 .81[20.8]
1.13 28.7 .56[14.3] .56 14.3 1.13[28.7]
.400 10.16 0.400[10.16] PADLOCK HOLE
.042 1.07 .042[1.07] .91 23.1
.50 12.8 .50[12.8]
1.49 37.8 L.-1.49[37.8]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
127
Latches
SPrgeRA PACIFIC EM -'"'-ERING AND PRODUCTS
Pull Down Latch with Spring Loop Loop Wire Pull Down Latch with Spring Wire Bail Bail Mounting Mounting Holes Holes
Material Material
Finish Finish
2139ZN-L 2139ZN-L
latch latch
yes yes
steel steel
zinc plated zinc plated
2139ZN-S 2139ZN-S
keeper keeper
yes yes
steel steel
zinc plated zinc plated
.79 [20.0] 20.0 .79
.211 [5.36] 5.36 0.211 (3) HOLES HOLES (3)
1.38 35.0 1.38[35.0]
.57 14.5 .57[14.5]
Description Description
Part Part Number Number
15.0 .59 [15.0] .59
.079 2.0 .079 [2.0] -.1H
.30 [7.6] 7.6 .30
1.20 [30.5] 30.5 1.20
.59 [15.0] 15.0 .59
maybe besealed sealed by by wire I may wire to to prevent prevent unlatching unlatching accepts 3/8" 3/8" padlock padlock I accepts
1.39 35.3
22.0 .87 [22.0]
.143 3.63 .98 24.9 .98[24.9]
1.800 45.72 1.800[45.72]
.143 3.63 .157 [4.00] 4.00 HOLE HOLE 0.157 THRU ALL
5.36] HOLE HOLE . .211 211g.36 (7) 7i PLCS. pL
2.74 69.6 .886 22.50 .886[22.50]
.98 25.0
.591 15.00 .591[15.00]
6.13 [155.7 6.13 55.7]
.118 [3.00] .400[10.16] 3.00 xx .400[ .118 10.16] OBROUND OBROUND THRU ALL THRU ALL
1.18 30.0
.063 1.60 THK. THK. .063[1.60] TYP.
.787 20.00 .787[20.00]
1.575 40.00 .575[40.00
.211 5.36 (4) HOLES
10.70 HOLE HOLE .421 [10.70] 0.421 THRU ALL ALL THRU
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
1.77 45.0
Draw Pull Pull Latch Draw Latch with with Keeper Keeper Part Part Number Number .161 [4.10] 4.10 0.161 (2) HOLES (2)
.29 [7.3] 7.3
.39 10.0 39[10A]
Finish Finish
304SS 304SS
polished polished
2062SS 206255
.96 24.4 1V1 56[24.4]
maybe besealed sealed by by wire I may wire to to prevent prevent unlatching unlatching
.71 18.0
4.5 .18 [4.5]
[46.0] -1.87 1.87 [47.51 [47.5] 1.81 [46.01 MOUNTING DISTANCE
Material Material
.63 [ 16.0 8.0] 2.95 74.9
1.77 45.0 .165 4.20 0.165[420] (3) HOLES (3)
IV I
.79 20.0
AM [15.7] .62 15.7
.126 3.20 (2) PLCS.
Draw Pull Pull Latch Draw Latch with with Padlocking Padlocking Option Option Part Part Number Number
.94 24.0 94 [24.0]
.35 9.0 .35[9.0] .08 2.0 .08[2.0]
.55 14.0 .55[14.0]
Material Material
Finish Finish
304SS 304SS
tumbled tumbled
2063SS 206355
accepts up up to to 1/4!' 1/4" padlock padlock I accepts
.98 25.0 .98[25.0]
2.03 [51.6] MOUNTING DISTANCE 8.0 .31 [8.0]
4.08 103.6 4.08[ 03.6]
1.31 [33.4] 33.4
61.3 2.41 [61.3]
.295 7.50 HOLE HOLE FOR FOR 0.295[7.50] UP TO TO 114. 1/4" PADLOCK UP
Draw Pull Pull Latch Latch with Spring Loaded Loaded Lever Draw with Spring Lever 1.18 30.0
.126 3.20 (2) HOLES
.39 10.0
0-4
-t
.39 10.0 .94 24.0 1.18 30.0
1.40 35.5
.16 4.0
.20 5.0
.69 17.5
.94 24.0
128
.039[1.00] 1.00 1.18 30.0 -039 THK.
.126 3.20 (4) HOLES
Download www.spep.com Download3DmoDELs @ @ www.spep.com
6.0 .24 [6.0]
.126 3.20 1.18 30.0 1.18[30.0] (2) HOLES
.1261.00 3.20 0.126[3.20] .039 (2) HOLES THK.
.039 1.00 THK.
Part Number Material Part Number Material
Finish Finish
2072NP 2072NP
nickel nickel plated plated
steel steel
10.0 .39 [10.0] .94 24.0 .16 4.0 .94[24.0] .94 24.0
.94 24.0
1.18 30.0 .098 2.50 0.098[2.50] 9.5 .37 [9.5] 1.40 35.5
.039 1.00 .94 24.0 .039[1.00]
.51 13.0 .20 5.0
30.0 1.18 1 18[30 0]
.69 17.5 35.5.69 17.5 1.40 [35.5] MOUNTING.126 DIMENSIONS 3.20 (4) HOLES .94 24.0 94 [24.0
.16 4.0 .16[4.0] .24 6.0
5.0 2.50 .20.098 [5.0] .37 9.5 .69 [17.5] 17.5 .69 .126 3.20 0 .126[3.20] (4) HOLES .039 1.00
24.0 .94 [24.0] .24 6.0
.94 24.0
springloaded loaded lever lever I spring
.51 13.0 .098 2.50 .37 9.5
.51 13.0 .69 17.5
.69 17.5
MOUNTING DIMENSIONS DIMENSIONS MOUNTING DIMENSIONS MOUNTING .039 1.00
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industri Industrial Hinges -I Hardware Hardware
Material Material
Finish Finish
Mounting Mounting Centers Centers
205S1 20551
yes yes
yes yes
steel steel
mill mill
1.13 [28.7] [28.7] 1.13
205S2 20552
yes yes
no no
steel steel
mill mill
welded welded
205ZN1 205ZN1
yes yes
yes yes
steel steel
zinc zinc
1.13 [28.7] [28.7] 1.13
205SS1 205551
yes yes
yes yes
304SS 304SS
tumbled tumbled
1.20 [30.5] [30.5] 1.20
205BK1 205BK1
yes yes
yes yes
steel steel
black black oxide oxide
1.13 [28.7] [28.7] 1.13
Material Material
Finish Finish
Mounting Mounting Centers Centers
yes yes
steel steel
mill mill
1.13 [28.7] [28.7] 1.13
.45 11.5 A5[11.5]
1.19 30.2 1.19[30.2]
.45 11.4 .45[11.4] .118 3.00 0.118[3.00]
MOUNTING MOUNTING CENTERS
1.03 26.1 1.03[28.1]
.141 3.57 0.141[3.57] (4) HOLES HOLES (4)
.322 8.18 0.322[8.18]
.078 1.98 .078[1.98
Latches
Pull Pull Down Down Latch Latch with with Padlock Padlock Eye Eye and and Keeper Keeper Part Padlock Mounting Padlock Mounting Part Number Hasp Holes Holes Number Hasp
.47 12.0 .47[12.0
Pull Down Latch and Pull Down Latch and Keeper Keeper Part Padlock Mounting Padlock Mounting Part Number Hasp Holes Holes Number Hasp
206S1 20651
no no
206S2 20652
no no
no no
steel steel
mill mill
welded welded
206ZN1 206ZN1
no no
yes yes
steel steel
zinc zinc
1.13 [28.7] [28.7] 1.13
206SS1 206551
no no
yes yes
304SS 304SS
tumbled tumbled
1.13 [28.7] [28.7] 1.13
.45 11.5
1.19 30.2 1.19[302]
.45 11.4
MOUNTING CENTERS CENTERS
1.03 26.1 1.03[28.1]
.078 1.98 .078] 1.98]
.118 3.00 0.118[3.00]
.141 3.57 0.141[3.57] (4) HOLES HOLES (4)
.47 12.0 .47[12.0]
Pull Pull Down Down Latch Latch with with Padlock Padlock Eye Eye and and Keeper Keeper Part Padlock Mounting Padlock Mounting Part Number Hasp Holes Holes Number Hasp
Material Material
Finish Finish
Mounting Mounting Centers Centers
207S1 20751
yes yes
yes yes
steel steel
mill mill
3.50 [88.9] [88.9] 3.50
207S2 20752
yes yes
no no
steel steel
mill mill
3.50 [88.9] [88.9] 3.50
207ZN1 207ZN1
yes yes
yes yes
steel steel
zinc plated zinc plated
3.50 [88.9] [88.9] 3.50
207SS1 207551
yes yes
yes yes
304SS 304SS
electropolished electropolished
3.54 [89.9] [89.9] 3.54
207ZN2 207ZN2
yes yes
no no
steel steel
zinc plated zinc plated
3.50 [88.9] [88.9] 3.50
207BK1 207BK1
yes yes
yes yes
steel steel
black black oxide oxide
3.50 [88.9] [88.9] 3.50
latch and and keeper keeper can can be be ordered ordered separately separately for for part 207SS1 (catch I latch part number number 207551 (catch part 207SSS) part no. no. 207SSC, 207SSC, keeper keeper part part no. no. 207555) latch and and keeper keeper can can be be ordered ordered separately separately for for part 207ZN1 I latch part number number 207ZN1 (catch keeper ppart art no. no. 207ZNS) (catch part part no. no. 207ZNC, 207ZNC, keeper 207ZNS)
.56 14.3
.216 5.49 (2) HOLES
1.06 26.9 .165 4.19 .375 9.53
MOUNTING CENTERS CENTERS
1.56 39.7
.098 2.50
.206 5.23 (2) HOLES
.63 16.0
Optional Keeper Keeper Optional
Pull Down Latch and Pull Down Latch and Keeper Keeper Material Material
Finish Finish
Mounting Mounting Centers Centers
yes yes
steel steel
mill mill
3.50 [88.9] [88.9] 3.50
Part Padlock Mounting Padlock Mounting Part Number Hasp Holes Holes Number Hasp
.47 12.0
208S1 20851
no no
208S2 20852
no no
no no
steel steel
mill mill
3.50 [88.9] [88.9] 3.50
208ZN1 208ZN1
no no
yes yes
steel steel
zinc plated zinc plated
3.50 [88.9] [88.9] 3.50
part 20711 (zinc) part no. no. 20711 (zinc) Ø .203 .203 [5.16] [5.16] 0 (2) places (2) places
1.88 [47.8] [47.8]
.813 .813 [20.65] [20.65]
2.65 2.65 [67.3] [673]
NOTE: overall same as as 207 207 series I NOTE: overall dimensions dimensions are are the the same series
Pull Pull Down Down Latch Latch with with Dual Dual Padlocking Padlocking Eyes Eyes Part Number Padlock Hasp Mounting Holes Material Part Number Padlock Hasp Mounting Holes Material
202ZN1 202ZN1
yes yes
yes yes
steel steel
Finish Finish
.157 4.00
.95 [24.0] 24.0 .95
zinc plated zinc plated
may be be used used with with 207ZNS keeper I may 207ZNS keeper .218 5.54 (2) HOLES
1.38 35.0
2.88 73.2
.313 [7.95] 7.95 xx .500 .500 [12.70] [12.70] .313 (2) OBROUNDS (2) OBROUN DS
.79 20.0
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.13 28.6
.72 [18.3] 18.3 .72
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
129
Latches
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Small Pull Down Latch with with Straight StraightLoop LoopWire Wire Bail Bail Small Pull Down Latch .118 [3.00] 3.00 0.118
Part Part Number Number
17.4 .69 [17.4]
Mounting Mounting Holes Holes
Material Material
Finish Finish
yes yes
steel steel
blue blue zinc zinc plated plated
2043ZN 2043ZN 26.9 1.06 [26.9] 1.82 [46.1] 46.1 .44 [11 11.1 .1] .44
1 -.-1
2043ZN-02 2043ZN-02
no no
steel steel
blue blue zinc zinc plated plated
2043SS 204355
yes yes
304SS 304SS
tumbled tumbled
2043SS-02 204355-02
no no
304SS 304SS
tumbled tumbled
seepg. pg.131 131 for for keeper keeper (sold (sold separately) separately) I see
2.00 .079 [2.00]
.146 [3.70] 3.70 0.146 (2) HOLES
.50 [12.7] 12.7 .50
Small Latch with HexagonalLoop LoopWire Wire Bail Bail Small Pull Pull Down Down Latch with Short Short Hexagonal Mounting Mounting Holes Holes
Length Length
Material Material
Finish Finish
2044ZN 2044ZN
yes yes
1.10 [27.9] [27.9] 1.10
steel steel
blue blue zinc zinc plated plated
2044ZN-01 2044ZN-01
yes yes
.88 [22.2] [22.2] .88
steel steel
blue blue zinc zinc plated plated
Part Part Number Number .071 [1.80] 1.80 0.071
.63 15.9
LENGTH 1.44 36.5 .44 11.1
1.10 1.10 length length .079 2.00
.146 3.70 (2) HOLES
.50 12.7
2044ZN-02 2044ZN-02
no no
.88 [22.2] [22.2] .88
steel steel
blue blue zinc zinc plated plated
2044SS 204455
yes yes
1.10 [27.9] [27.9] 1.10
304SS 304SS
tumbled tumbled
2044SS-01 204455-01
yes yes
.88 [22.2] [22.2] .88
304SS 304SS
tumbled tumbled
2044SS-02 204455-02
no no
.88 [22.2] [22.2] .88
304SS 304SS
tumbled tumbled
seepg. pg.131 131 for for keeper keeper (sold (sold separately) separately) I see
.88 length .88 length
Small Pull Down Latch with with Spring SpringLoop LoopWire Wire Bail Bail Small Pull Down Latch Part Mounting Holes Holes PartNumber Number Mounting .075 [1.90] 1.90 0.075
.66 16.8
>( //'`
Material Material
Finish Finish
2047ZN 2047ZN
yes yes
steel steel
blue blue zinc zinc plated plated
2047SS 204755
yes yes
304SS 304SS
tumbled tumbled
seepg. pg.131 131 for for keeper keeper (sold (sold separately) separately) I see
1.23 31.3 49.4 1.95 [49.4] .44 11.1
i 2.00 -..1 .079 [2.00] 12.7 .50 [12.7]
.146 3.70 (2) HOLES
Small Pull Down Latch with with Spring Spring Hook HookLoop LoopWire Wire Bail Bail Small Pull Down Latch Part Mounting Holes Holes PartNumber Number Mounting 1.0 25 .075 1.90 .31 7.9
Material Material
Finish Finish
2046ZN 2046ZN
yes yes
steel steel
blue blue zinc zinc plated plated
2046SS 204655
yes yes
304SS 304SS
tumbled tumbled
canbe beused usedwith withor or without without keeper keeper on on pg. pg. 131 131 (sold I can (sold separately) separately) 1.46 37.0 2.10 53.3 .44 11.1
.079 2.00
.146 3.70
.50 12.7
(2) HOLES
Small Pull Down Latch with with Hook Hook Loop LoopWire Wire Bail Bail Small Pull Down Latch .23 6.0
.88 22.3
.118 3.00
1.66 42.1
Material Material
Finish Finish
2048ZN 2048ZN
Part PartNumber Number Mounting Mounting Holes Holes yes yes
steel steel
blue blue zinc zinc plated plated
2048SS 204855
yes yes
304SS 304SS
tumbled tumbled
canbe beused usedwith withor orwithout withoutkeeper keeperon onpg. pg.131 131 (sold (sold separately) separately) I can
2.30 58.4
.44 11.1
.079 2.00 .50 12.7
130 130
Download 3DmoDELs @ @www.spep.com www.spep.com Download
.146 3.70 (2) HOLES
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industri -1 Hardware Hare/IA-re
2052ZN 2052ZN
yes yes
Material Material
Finish Finish
steel steel
zinc plated zinc plated
1.18 30.0 1.18[30.0] h-
.093 [2.36] 2.36 0.093
canbe beused used with withor or without withoutkeeper keeperbelow below(sold (sold separately) separately) I can .80 20.3 80[20.3]
47.8 1.88 [47.8]
3.3 84 3.3[84]
Latches
Pull Down Latch with Spring Hook Hook Loop Loop Wire Pull Down Latch with Spring Wire Bail Bail Part MountingHoles Holes Part Number Number Mounting
12.9 .51 [12.9] REF. .56 14.3 .56[ 4.3]
25° 2.70 .106 [2.70]
.220 5.60 (3) HOLES
.97 24.5 97 [24.5]
Small Latch with Padlock Eye Eye and Loop Wire Small Pull Pull Down Down Latch with Padlock and Hook Hook Loop Wire Bail Bail Material Material
Finish Finish
2049ZN 2049ZN
Part MountingHoles Holes Part Number Number Mounting yes yes
steel steel
blue blue zinc zinc plated plated
2049SS 204955
yes yes
304SS 304SS
tumbled tumbled
24.1 ..95 95[24.1]
1-
.079 [2.00] 2.00 0.079
1.58 40.1
canbe beused used with withor or without withoutkeeper keeperbelow below(sold (sold separately) separately) I can
80.0 3.15 [80.0]
8.18 0 .322 [8.18]
1.02 25.8
2.00 .079 [2.00]
.157 4.00
.81 20.5 .81[20.5]
(2) HOLES
Small Pull Down Latch Keeper Part Number
Mounting Holes
Material
Finish
204ZN-K 204ZN-K
yes yes
steel steel
blue blue zinc zinc plated plated
204SS-K 20455-K
yes yes
304SS 304SS
tumbled tumbled
.53 13.5 .53[13.5]
.059 1.50 ] .059[1.50
.13 3.2 ] .13[3.2
.50 12.8 .50[12.8] .59 15.1 .59[ 15.1] .88 22.2 .88[22.2]
.130 3.30 0.130[3.30] (2) HOLES HOLES (2)
.31 7.9 .31[7.9]
Stamped Padlocking Over Over Center Center Latch Latch Stamped Padlocking Part Number Part Number
Material Material
Finish Finish
steel steel
nickel plated nickel plated
2045 2045
.41 10.4
2.97 [75.4] 75.4 2.97
springloaded loadedlever leversnaps snaps to to the the open open or or closed I spring closed position position 1.25 31.8 1.25[31.8]
1.25 31.8 1.25[31.8]
.165 4.19 HOLE HOLE 0.165[4.19] (4) PLCS. (4) PLCS.
1.260 32.00 1.260[32.00]
Ø.165 HOLE HOLE WITH WITH 0.165 Ø.250 [6.35] [6.35] xx 82° C'SINK 0.250 8T C'SINK (4) PLACES PLACES (4) Ø.313 [7.94] [7.94] 0.313
1.250 31.75 1.250[31.75]
.72 [18.3] 18.3 .72
1.63 [41.4] 41.4 1.63
.49 12.4 39 [12.4]
1.250 31.75 1.250[31.75]
u
.50 12.7 .50[12.7]
.134 3.40 0.134[3.40] 1
111
2.09 53.1 -.1 2.09[53.1]
.94 [23.9] 23.9 .94
l l
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Stamped Over Center Center Latch Latch Stamped Over Part Number Part Number
Material Material
Finish Finish
steel steel
nickel plated nickel plated
2051 2051
.161 [4.10] 4.10 HOLE HOLE WITH WITH 0.161 100 C'SINK A 100° C'SINK FOR FORA #5 F.H.S., F.H.S., (4) (4) PLACES PLACES #5
2.20 56.0 1.17 29.8
springloaded loadedlever leversnaps snaps to to the the open open or or closed I spring closed position position 1.260 32.00 1.260[32 00 ]
.165 4.19 HOLE HOLE 0.165[4.19] (4) PLCS. (4) PLCS.
1.51 38.4
1.03 26.2
.25 [6.4] 6.4 .25
.69 17.4
1.250 31.75 1.250[31.75]
1.03 [26.2] 26.2 1.03
1.250 31.75 1.250[31.75] .12 [3.1] 3.1 - .12 .41 [10.5] 10.5 .41
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Request Info
1-800-453-1692 www.aboveboardelectronics.com
f
1.72 43.6 1.72[43.6]
.114 2.90 0.114[2.90] 0
.15 [3.7] 3.7 .15 .39 10.0 .39[10.0] .63 15.9 .63[15.9]
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
131
Latches
SIERRA PACIFIC ENGINEERING PRODUCTS Small Small Pull Pull Down Down Latch Latchwith withExposed Exposed Mounting Mounting Holes Holes 1.40 35.6
Part Part Number Number
Wire Bail Wire Bail
Material Material
.87 22.0
2060ZN-L 2060ZN-L
short curved curved wire wire short
steel steel
2060SS-L
1.42short 36.0 curved short curved 1.50 wire38.0 wire
304SS 304SS
long flat wire long flat wire
steel steel
20601SS-L 2060155-L
long flat wire long flat wire
304SS 304SS
passivated passivated
20602ZN-L 20602ZN-L
long curved wire wire long curved
steel steel
zinc plated zinc plated
20602SS-L 2060255-L
long wire long curved curved wire
.079 2.00
1.42 36.0 206055-L .85 21.6
20601ZN-L 20601ZN-L
1.18 30.0 .165 4.20 (2) HOLES 1.10 28.0
.53 13.5 SHORT CURVED 2060ZN-L 2060SS-L
EXPOSED EXPOSED MOUNTING
1.40 35.6 .87 22.0 .079 2.00
1.42 36.0 1.42[36.0]
20603ZN-L
1.50 38.0
1.42 36.0 1.42[36.0]
.99 25.2
.85 21.6 85[21.6] 1.18 30.0 1.18[30.0]
zinc plated zinc plated passivated passivated
.99 25.2
304SS 304SS
SHALLOW HOOK LONG FLAT LONG CURVED 20603ZN-L 20601ZN-L 20602ZN-L shallow20603SS-L hook wire hook wire 20601SS-L20603ZN-L 20602SS-L shallow .118 3.00
Finish Finish
.118 3.00
zinc plated zinc plated
passivated passivated
SHORT FLAT HEAVY DUTY steel steel 20604ZN-L
zinc plated zinc plated
20603SS-L 2060355-L
shallow hook wire shallow hook wire
304SS 304SS
passivated passivated
20604ZN-L 20604ZN-L
short flat short flat heavy-duty wire heavy-duty wire
steel steel
zinc plated zinc plated
seebelow below for for keeper I see keeper options options
.165 4.20 (2) HOLES 1.10 28.0
.53 13.5 .53[13.5] SHALLOW HOOK SHORTFLAT FLAT LONG CURVED LONG CURVED SHALLOW HOOK SHORT 20603ZN-L HEAVY DUTY 20602ZN-L 20603ZN-L HEAVY DUTY 20603SS-L 20602SS-L 2060335-L 20604ZN-L 2060235-L
LONG FLAT LONG FLAT 20601ZN-L 20601SS-L 2060135-L
SHORT CURVED CURVED SHORT 2060ZN-L 2060SS-L 206035-L
EXPOSED MOUNTING
Small Small Pull Pull Down Down Latch Latchwith withConcealed Concealed Mounting Mounting Holes Holes .87 22.0
Part Part Number Number
.079 2.00 0.079[2.00]
2061ZN-L 2061ZN-L
.165 4.20 0.165[4.20] (2) HOLES
1.34 34.0
2061SS-L 206155-L
.77 19.5 .39 10.0 39[10.0]
.60 15.2 60[15.2]
.53 13.5 SHORT CURVED 2061ZN-L 2061SS-L
EXPOSED EXPOSED
MOUNTING
.87 22.0
I
1.34 34.0
1.42 36.0
1.34 1 34[1334.0 4 0]
.77 19.55] 77[19 .39 10.0
Finish Finish
steel steel
zinc plated zinc plated
1.42 36.0
1.34 34.0
304SS 304SS
passivated passivated
long flat wire long flat wire
steel steel
zinc plated zinc plated
20611SS-L 2061155-L
long flat wire long flat wire
304SS 304SS
passivated passivated
20612ZN-L 20612ZN-L
long wire long curved curved wire
steel steel
zinc plated zinc plated
LONG FLAT LONG CURVED 2061255-L long 20611ZN-L 20612ZN-Llong 20611SS-L 20612SS-L
.079 2.00 .165 4.20 (2) HOLES
Material Material
short curved curved wire wire short
20611ZN-L 20611ZN-L
1.19 30.1
Wire Bail Bail Wire short curved curved wire wire short
SHALLOW HOOK
20612SS-L
curved wire curved wire 20613ZN-L
304SS 304SS
passivated passivated
20613ZN-L 20613ZN-L
shallow hook wire shallow hook wire
steel steel
zinc plated zinc plated
20613SS-L 2061355-L
shallow hook wire shallow hook wire
304SS 304SS
passivated passivated
20613SS-L
see below for keeper options
1.19 30.1 1.19[30.1]
O lli
.60 15.2
.53 13.5 .53[13.5] LONG FLAT FLAT LONG 20611ZN-L 20611SS-L 206115S-L
SHORT CURVED SHORT CURVED 2061ZN-L 2061SS-L 206155-L
EXPOSED MOUNTING
LONG CURVED LONG CURVED 20612ZN-L 20612SS-L 206125S-L
SHALLOW HOOK SHALLOW HOOK 20613ZN-L 20613SS-L 2061335-L
Small Small Keepers Keepers Part Part Number Number
Type Type
Material Material
Finish Finish
2060ZN-K 2060ZN-K
small small
steel steel
zinc plated zinc plated
2060SS-K 206055-K
small small
304SS 304SS
passivated passivated
narrow narrow
steel steel
zinc plated zinc plated
20601SS-K 2060155-K
narrow narrow
304SS 304SS
passivated passivated
20602ZN-K 20602ZN-K
right right angle angle
steel steel
zinc plated zinc plated
20602SS-K 2060255-K
right right angle angle
304SS 304SS
passivated passivated
20603ZN-K 20603ZN-K
large large
steel steel
zinc plated zinc plated
20603SS-K 2060355-K
large large
304SS 304SS
passivated passivated
20604ZN-K 20604ZN-K
medium medium
steel steel
zinc plated zinc plated
20604SS-K 2060455-K
medium 304SSpassivated passivated medium 304SS
20601ZN-K 20601ZN-K 1.18 30.0 1.18[30.0]
.165 4.20 0.165[4.20] (2) HOLES .15 3.8 15[18]
.59 14.9 .59[14.9]
.165 4.20 0.165[4.20] (2) HOLES
.059 1.50 .059[1.50]
t
.79 20.2 .79[20.2]
1.06 26.9 1.06[26.9]
.20 5.0 39[10.0] .39 10.0 .20[5.0]
.53 13.4 .53[13.4]
.23 5.9 .23[5.9]
.87[22.0] .87 22.0
.30 7.6 .30[7.6]
.59 15.0 59[15.0]
RIGHT ANAI F RIGHT ANGLE 20602ZN-K 20602SS-K 206023S-K
.071 1.80 ] -4.-.071] 1.80
NARROW 20601ZN-K 20601SS-K 20601SS-K
1.18 30.0 1.18[30.0] .59 15.0 .59] 15.0]
1.18 30.0 1.18[30.0]
.165 4.20 0.165[4.20] (2) HOLES
1
.16 4.0 .16[4.0] .165 4.20 0.165[4.20] (2) HOLES
.54 13.7 .54[13.7] .31 8.0 .31[8.0] .071 1.80 -...- .071[1.80]
.87 22.0 .87[22.0] SMALL MALL 2060ZN-K 2060SS-K 2060SS-K
132 132
Download 31:Immo @ Download @ www.spep.com www.spep.com
.30 7.6
.35 9.0] 9.0 -.35[
4
i .51 13.0 .51[13.0]
.165 4.20 (2) HOLES
1.13 28.8
.20 5.0
.39 10.0
1.72 43.8
.0711.80 1.80 ] h-.071[
1.12 28.5 1.12[28.5]
MEDIUM 20604ZN-K 20604SS-K
.87 22.0
.071 1.80 ]•-•••• .071]
LARGE 20603ZN-K 20603ZN-K 20603SS-K 20603SS-K Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges mnd and Industrial Hinges Inch•ctrial Hardware I-If•rdware
Material Material
Finish Finish
2133ZN-L 2133ZN-L
steel steel
zinc plated zinc plated
Draw Pull Latch Draw Pull Latch with with Padlock Padlock Hole Hole
CD 1.50 38.0
2.13 54.0 .13 [54.0]
.315 8.00 0.315[8.00]
accepts up padlock ► accepts upto to 5/16" 5/1e padlock ► keeper keeper not not included included
52.7 2.08 52.7]
5.71 145.1
Latches
Part Part Number Number
1.28 32.5] 32.5 1.28
7.00 .276 [7.00] 0.278 (4) HOLES HOLES (4)
.335 8.50
.118 3.00 + .118[3.00]
.98 25.0 .98[25.0]
Lever Draw Pull Latch Lever Draw Pull Latch Part Part Number Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
2073ZN 2073ZN
.59 15.0 59[15.0]
.12 3.0
.47 12.0 .47 [12.0]
1.42 36.0
.114 4 2.90 .1 [2.4 .197 5.00 0.197[5.013]
2.24 [57.0] 57.0 2.24 .114 2.90
F..__ .114[2.90]
.217 5.50 0.217[5.50] (4) (4) HOLES HOLES
.39 .39[10.0 OS]
.79 20.0 .79[20.o] 4.21 [107.0 421 07.0]
.94 24.0
.177 4.50
1.38 35.0
1.06 27.0 .m[27.0]
Part Number Part Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
2136ZN 2136ZN
Ma.
Heavy Duty Duty Spring Spring Loaded Loaded Draw Draw Pull Pull Latch Latch with with Cast Cast Steel Heavy Steel Bolt Bolt 1.81 46.0 1.81 [46.0]
.87 [22.0] 22.0 .87 1.00 [25.4] 25.4 1.00
weldable keeper keeper ► weldable .63 15.9 .63 [15.9] ]2.36 [60.0] 60.0 2.36
.335 [8.50] 8.50 0.335 (4) HOLES HOLES (4)
5.14 [130.5 5.14 30.5]
10.84 [275.3] 275.3 10.84
2.28 [57.8] 57.8 2.28
3.18 80.8 3.18[80.8]
53.5 2.11 53.5] 2.11
6.00 152.3 V 6.00 [ 52.3]
.118 3.00 .118[3.00] THK. THK.
1.05 26.8 1.05[26.8]
Heavy Duty Duty Spring Spring Loaded Loaded Draw Draw Pull Pull Latch Latch with with Cast Cast Steel Heavy Steel Bolt Bolt Part Material PartNumber Number Material
2134ZN 2134ZN
steel steel
Finish Finish
2.36 60.0
zinc plated zinc plated
keeper not included
.335 8.50 0.335[8.55]
2.26 57.4
(6) (6) HOLES HOLES
1.69 43.0] 43.0 1.69
9.94 252.4
5.98 152.0 3.39 [86.0] 86.0 3.39
2.30 58.5
3.15 80.0
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.118 3.00 THK. 1.33 33.9
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
133
Latches
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Over Center Center Latch Latch Over Latch Latch
2.313 [ 58.75 ] MOUNTING DIMENSION
.219 5.56 0.219[5.56] (2) HOLES HOLES (2)
mouNIZTAK.
.203 5.16 0.203[5.16] (2) HOLES HOLES (2)
.50 12.7 .50[12.7]
Part Description Material Material PartNumber Number Description
213 213 1.87 47.6 1.87
1.38 34.9] 34.9
.75 19.1
latch latch
Finish Finish
steel steel
zinc plated zinc plated
.56 14.2 1.00[25.4] 1.00 25.4 .56[14.2]
llll
.27 6.9 3.65 92.7 3.65[92.7]
2.0 ..079 079[2.0]
144
Keeper Keeper
.92 23.3 .92[23.3]
.047 1.2 .047 1.2
.57 14.5 .,[14.5]
.063 1.60 063[1.60]
.48 12.1 .48[;2.1]
Part Description Material Material PartNumber Number Description
2131 2131
1.40 35.5 1.4Cm.51
keeper keeper
Finish Finish
steel steel
zinc plated zinc plated
Over Center Center Latch Latch with Radial Base Base Over with aa Radial Finish Finish
PVC PVC Coating Coating
214 214
Part Material PartNumber Number Material steel steel
zinc plated zinc plated
yes yes
214-01 214-01
steel steel
zinc plated zinc plated
no no
3.75 95.2 75[052]
1.38 35.1 .3c. a1 137147.0] 1.87 47.6 CENT.
.75[131] .75 19.1
.219 5.56 0.218[530 (2) HOLES (2) TOP VIEW .50 12.7 .60[12.7]
84 [1 ]
.047 7 1.20 .33
.083 2.10
.67 17.0 .87[17.0]
1.40 35.7 A0]35.7]
R. 0.001152.4If 6.00 [152.4] FRONT NEW VIEW FROM
SIDE VIEW
Over Center Center Latch Latch with Radial Base Base Over with aa Radial Part Description Material Material PartNumber Number Description
3.79 96.2 3.7131E0.2
214-02 214-02 .75 75[19.1 81]
CL
Ili
1.38 35.1 CENT.
latch latch
Finish Finish
steel steel
zinc plated zinc plated
latch has reversed lever
1.87 47.6
.219 5.56
(2) HOLES f 2)2Vgj TOP VIEW
.50 12.7 2] 40 12 .059 1.50 .501
.08 Ds 2.0 28]
.08 2.10 .68[2.10]
.35 8.9 .95[8.9] .12 3.0 .12[9.0]—•1
R. 6.00 [152.4]
1.79 45.6 138E45.1
FRONT MEV/ VIEW FROM
SIDE VIEW MUMMY
Large Compression Pull Down Catch with Holes for Fixed or Adjustable Mounting Part Number
Description
Material
Finish
latch
steel
zinc plated
2141SS-L
latch
304SS
passivated
2141ZN-K
keeper
steel
zinc plated
2141SS-K
keeper
304SS
passivated
2141ZN-L
1.87 47.5 x+41[41.5]-1
.063 1.60
1.50 38.1
F
.[,] .87 22.1
.18 4.6
1.19 30.1
.81 20.6
j .90 22.9
.063 1.60 ...-4es[1.83]
1.93 49.0
.78 19.8
TOP VIEW
END VIEW
Download www.spep.com Download3DmoDELs @ @ www.spep.com
.36 9.1
.24 6.0
1.185 30.10
.169 4.30 TYP. .169 4.30 TYP.
.169 4.30 0.103[430]
1.500 38.10 1.50 38.1
2.84 [72.1] MAX. ----------------------2.74 [69.6] MIN.
1.87 47.5
2.78 [70.5] MAX. ----------------------2.68 [68.0] MIN.
1 3.40 86.5 3.40[88.s]
2.90 [73.7] MAX. ---------------------2.80 [71.2] MIN.
.06 1.6 TYP.
2.78 [70.6] MAX. ----------------------2.68 [68.1] MIN.
.69 17.5 TYP.
.13 3.2 TYP.
134 134
1.500 38.10 1.5oot98.18
1.500 38.10
.26 6.6
04[21 .84 21.3
FIXED MOUNTING DIMENSIONS
TYP.
ADJUSTABLE DIMENSIONS ADJUSTABLE MOUNTING MOUNTING DIMENSIONS
BOTTOM VIEW EMN.0333
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges and Industrial Industrial bfrrdWare
Finish Finish
2142ZN-L 2142ZN-L
latch latch
steel steel
zinc plated zinc plated
2142SS-L 214255-L
latch latch
304SS 304SS
passivated passivated
3.22 81.8
.57 14.5
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same plane I latch plane springsare are to to compensate compensate for I springs for misalignment misalignment 2.17 [55.0] [55.0] MIN. MIN. 217 2.26 [57.3] [57.3] MAX. MAX. 228
1.376 34.94 1.378[34.91]
.63 16.0
.50 12.7
Latches
1.50" Loaded Over Over Center Center Latches Latches 1.50" Spring Spring Loaded Part Description Material Material PartNumber Number Description
1.50 38.0
5.54 HOLE HOLE 218[534] 0 .218 (4) PLCS. PLCS. (4)
.218 5.54 (2) HOLES
.562 14.27 .5e2[1427]
.50 12.7
1.38 34.9
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
2.50" Center Latch 2.50" Spring Spring Loaded Loaded Over Over Center Latch Part Description Material Material PartNumber Number Description
2144ZN-L 2144ZN-L
latch latch
steel steel
4.16 105.6
Finish Finish zinc plated zinc plated
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same plane I latch plane springsare are to to compensate compensate for I springs for misalignment misalignment 3.10 [78.7] MIN. 3.19 [81.0] MAX.
.91 23.1
1.376 34.94 1378[34.94]
.63 16.0
.50 12.7
2.43 61.8
.218 5.54 HOLE HOLE 0.218[5.54] (4) PLCS. PLCS. (4)
.218 5.54 0.218[5.54] (2) HOLES
.562 14.27 .582[14.27]
II
50[127]
.50 12.7
1.38 34.9 1.38[34.9] MOUNTING DIMENSIONS MOUN71NG DIMENSIONS
1.50" Over Center Center Latches Latches 1.50" Wire Wire Sealing Sealing Spring Spring Loaded Loaded Over Part Description Material Material PartNumber Number Description
Finish Finish
2146ZN-L 2146ZN-L
latch latch
steel steel
zinc plated zinc plated
2146SS-L 214655-L
latch latch
304SS 304SS
passivated passivated
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same plane I latch plane springsare are to to compensate compensate for I springs for misalignment misalignment 2.17 [55.0] MIN.
2.26 (573]MAX. [57.3] MAX. 228
1.376 34.94 1.378[34.94]
5.54 218[5.54] SO .218 (4) PLCS. PLCS. (4)
3.22 81.7 3.22[81.7]
.59 15.0 .59[15.0]
.125 3.18 0.125[3.18] (2) HOLES (2) HOLES
1.00 25.4 1.00[25.4]
.63 16.0 p.133[
HOLE HOLE
.562 14.27 .582[1427]
Orw
1.50 38.0 38.0 ] -.-1.50[ .218 5.54 0.218[5.54 (2) HOLES HOLES (2)
1.38 34.9
.50 12.7
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
1.50" Spring Loaded Loaded Over Over Center Center Latches Latches 1.50" Padlocking Padlocking Spring Part Description Material Material PartNumber Number Description
2148ZN-L 2148ZN-L
latch latch
2148SS-L 214855-L
latch latch
steel steel
Finish Finish
3.22 81.8 3.22[81.8]
zinc plated zinc plated
304SS 304SS
passivated passivated
.374 9.50 0.324[9.50] .88 22.2 .88[22.2]
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same plane I latch plane springsare are to to compensate compensate for I springs for misalignment misalignment 2.17 [55A] MIN. 2.17 [55.0] MIN. 2.26 [57.3] MAX. 2.28 [573] MAX.
1.376 34.94 1.378[34.94]
1.00 25.4 1.00[25.4]
.218 5.54 HOLE HOLE 218[5.54] (4) PLCS. PLCS. (4)
.562 14.27 .582[1427]
.63 16.0 .133[18.0] 1.50 38.0 —.-1.50[ .218 5.54 0.218[5.54] (2) HOLES
1.38 34.9
.50 12.7
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Keepers Keepers Part Description Material Material PartNumber Number Description
.218 5.54 0.218[5.54] (2) HOLES HOLES (2)
Finish Finish
2142ZN-K 2142ZN-K
keeper keeper
steel steel
zinc plated zinc plated
2142SS-K 214255-K
keeper keeper
304SS 304SS
passivated passivated
usedwith withlatches latcheson onthis thispage page(sold (sold separately) separately) I used
1.00 25.4
.607 15.42
.56 14.3
.25 6.4
.42 10.7 .42[ 10.7] .079 2.00 —C.079[2.00]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
135 135
Latches
SIERRA PACIFIC ENGINEERING AND PROD" -
Extra Large Center Latch Latch with Tab Up Extra Large Over Over Center with Tab Up Lever Lever Part Number Part Number
6.39 162.4 8.39[182.4]
Material Material
Finish Finish
steel steel
zinc plated zinc plated
215-150ZN 215-150ZN
.93 [23.6] 23.6 .93
f .0799 [2.00] 2.00 .07
2.66 [67. 67.66] 2.66
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same I latch plane plane
.05 [1.3] 1.3 .05
31.0 1.22 [31.0] 1.22
2.78 [70.6] 70.6 2.78
1.61 [41.0] 41.0 1.61
1.18 30.0 1.18[30.0]
.256 6.50 0.256[6.50] (2) HOLES HOLES (2)
.75 19.1 .75[19.1]
Extra Large Extra Large Over Over Center Center Latch Latch with with Tab Tab Down Down Lever Lever Part Number Part Number
159.3 6.27 [159.3] 6.27
Material Material
Finish Finish
steel steel
zinc plated zinc plated
215-250ZN 215-250ZN
.80 20.2 .80[20.2] 2.66 67.6 -"] _•4.66 'f ~
.079 [2.00] 2.00 .079
1.22 [31.0] 31.0 1.22
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same I latch plane plane
.051 [1.30] 1.30 .051
2.78 [70.6] 70.6 2.78
1.18 30.0 1.18[30.0]
1.61 [41.0] 41.0 1.61
.256 6.50 0.256[6.50 (2) (2) HOLES HOLES
.75[19.1] 19.1 k-.75
Extra Large Extra Large Over Over Center Center Latch Latch with with Padlock Padlock Hole Hole
1.69 1.69 42.9 [2.9]
.93 23.6 .93[23.6]
1.22 31.0 1.22 [31.0]
Material Material
Finish Finish
steel steel
zinc plated zinc plated
.583 [14.80] 14.80 0.583 PADLOCK HOLE HOLE PADLOCK
215-350ZN 215-350ZN
0
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same I latch plane plane
2.66 67.6 2.66[67.6]+
r .075L11.90 .075 .90 j
1.61 41.0 1.61[41.0]
Part Number Part Number
162.4 6.39 [162.4] 6.39
.197 5.00 0.197[5.00] SEAL HOLE HOLE SEAL
.051 [1.30] 1.30 .051
2.78 2 7870.6 [70.6] r-
1.18 30.0 1.18 [30.0]
1
.256 [6.50] 6.50 0.256 (2) HOLES HOLES (2)
.75 [19.1] 19.1 .75
Extra Large Extra Large Keeper Keeper with with (1) (1) Hole Hole Part Number Part Number
1.42 36.00] 1 42[36
Material Material
Finish Finish
steel steel
zinc plated zinc plated
215-K33ZN 215-K33ZN
foruse usewith withextra extralarge large latches latches on on this this page I for page (sold (sold separately) separately)
1.16 29.5 1.16[29.5] .256 6.50 0.256[6.50] THRU HOLE HOLE THRU 1.220 1.220[ 30.99 30.99]
.30 7.7 .30[7.7]
.50 12.7 .50[12.7]
.256 6.50 HOLE HOLE 0.256[6.50] (3) PLCS. PLCS. (3)
4.160 105.66 4.160[105.66]
1.53 38.9 1.53[38.9] .079 2.00 .079[2.00]
u.
0 0
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Extra Large Extra Large Keeper Keeper with with (2) (2) Holes Holes Part Number Part Number
.69 17.5
Material Material
Finish Finish
steel steel
zinc plated zinc plated
215-K34ZN 215-K34ZN
foruse usewith withextra extralarge large latches latches on on this this page I for page (sold (sold separately) separately)
1.42 36.0 .256 6.50 ] 0 .256[6.50 (2) HOLES HOLES (2)
1.220 30.99
.31 8.0 1.61 41.0 1.61[41.0]
1.890 48.01 ] 1.890[48.01
.256[6..50] 6.50 HOLE HOLE S4.;2p56 (4) PLCS. Lcs (6
.44 11.1 11.1 ] .44[
0 0 .079 2.00 .079[2.00]
.690 17.53 .690[17.53]
O 7
1.73 44.0] 1.73[44.0 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
136 136
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industrial Hardware bfrrdWare
Material Material
Finish Finish
215-140ZN 215-140ZN
steel steel
zinc plated zinc plated
215-140SS 215-14055
304SS 304SS
electropolished electropolished
215-140BK 215-140BK
steel steel
black black matte matte
4.83 [122.6] 122.6 4.83 .72 18.2 .72 [18.2]
.059 .059 [11.50 .so]
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same I latch plane plane
2.00 [50.8] 50.8 2.00
Latches
Large Over Center Latches Latches Large Over Center Part Part Number Number
I..- .051 1.30 .051 [1.30]
1.00 [25.4] 25.4 1.00
2.25 [57.1] 57.1 2.25
1.19 [30.2] 30.2 1.19
.78 [19.8] 19.8 .78
.203 [5.16] 5.16 0.203 (2) HOLES HOLES (2)
.63 [15.9] 15.9 .63
Large Over Large Over Center Center Latches Latches with with Padlock Padlock Hole Hole Material Material
Finish Finish
215-340ZN 215-340ZN
Part Part Number Number
steel steel
zinc plated zinc plated
215-340SS 215-34055
304SS 304SS
electropolished electropolished
215-340BK 215-340BK
steel steel
black black matte matte
.11 [2.8] 2.8 0.11 SEAL HOLE SEAL HOLE 1.13 [28.6] 28.6 1.13
122.6 4.83 [122.6] 4.83 .406 [10.32] 10.32 0.406 PADLOCK HOLE PADLOCK HOLE
.72 [18.2] 18.2 .72
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same I latch plane plane
2.00 50.8 21.00 [50.8]
.06 [1.5] 1.5 .06 1.00 [25.4] 25.4 1.00
t
.051 1.30 .051 [1.30] 2.25 [57.1] 57.1 2.25
1.19 [30.2] 30.2 1.19
.78 [19.8] 19.8 .78
.203 [5.16] 5.16 0.203 (2) HOLES HOLES (2)
.63 15.9 .63 [15.9]
Keepers with Keepers with (1) (1) Hole Hole and and Locator Locator Dimple Dimple Material Material
Finish Finish
215-K21ZN 215-K21ZN
Part Part Number Number
steel steel
zinc plated zinc plated
215-K21SS 215-K2155
304SS 304SS
electropolished electropolished
215-K21BK 215-K21BK
steel steel
black black matte matte
.50 .50[ 12.7 12.7
2.75 69.9 2.75[69.9]
1.000 25.40 1.000[25.40
.23 6.0 6.0
.98 24.8 .98[24.8] LOCATOR LOCATOR DIMPLE DIMPLE
usewith withlarge largelatches latcheson onthis thispg. pg. (sold (sold separately) separately) I use .203 5.16 HOLE HOLE 0.203[5.16] (2) PLACES PLACES (2)
.207 5.26 ] 0 .207[5.26 THRU THRU HOLE HOLE
1.16 29.4
.207 5.26 HOL HOLE 0.207[5.26]
.1=
.41 10.3 10.3 ] .41[
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
.06 1.5
Keepers Keepers with with (2) (2) Holes Holes Material Material
Finish Finish
215-K24ZN 215-K24ZN
Part Part Number Number
steel steel
zinc plated zinc plated
215-K24SS 215-K2455
304SS 304SS
electropolished electropolished
215-K24BK 215-K24BK
steel steel
black black matte matte
.50 12.7 .50[12.7
1.560 39.62 1.560[39.62]
1.000 25.40 1.000[25.40]
.56 14.3 14.3 ] .56[
.207 5.26 HOLE HOLE 0.207[5.26] PLCS. -(2)(2) PLCS.
.95 24.2 .95[24.2]
.207 5.26 ] 0 .207[5.26 (2) HOLES (2) HOLES
usewith withlarge largelatches latcheson onthis thispg. pg. (sold (sold separately) separately) I use .203 5.16 HOLE HOLE 0.203[5.16 (2) PLCS.
12.70 -••-•.500 500[12.70]
1.19 30.2 30.2 ] 1.19[
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
.34 8.7 .34[8.7] .063 1.60 ] S63[1.60
1.28 32.5 1.28[ 32.5
Button Keepers Button Keepers Part Part Number Number
Material Material
Finish Finish
215-K28ZN 215-K28ZN
steel steel
zinc plated zinc plated
215-K28SS 215-K2855
304SS 304SS
electropolished electropolished
215-K28BK 215-K28BK
steel steel
black black matte matte
2.25 57.2 1.000 25.40 .2] 1.000[25.4012.25[57
.56 14.3 14.3 ] .56[
.31 7.9 7.9 ] .31[
usewith withlarge largelatches latcheson onthis thispg. pg. (sold (sold separately) separately) I use
. .203 5.16 HOLE HOLE 0.203[6.16] (2) PLACES
.207 5.26 HOL HOLE 0.207[5.26]
MOUNTING DIMENSIONS MOUNTING DIMENSIONS Request Info
.203 5.16 0.203[5.16] THRU HOLE THRU HOLE
.41 10.3 0.41[10.3]
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
137 137
Latches
''TERRA PACIFIC
ENGINEERING AND PROP""
---
MediumOver Over Center Center Latches Latches with with Tab Tab Up Medium Up Lever Lever
1.91 48.5 -1.91[48.5]
r .56 14.2 .56 [14.2]
1.50 38.1t 1. 1 50 [38.
.059 1.50 .059 [1.50] .172 [4.37] 4.37 0.172 (2) HOLES HOLES (2)
THICKNESS THICKNESS
LENGTH LENGTH (SEE TABLE) (SEE TABLE)
.89 22.55] .89 [22
.57 14.5 .57 [14.5]
.69 17.5 .69 [17.5]
Part Number Part Number
Length Length
Thickness Thickness
Material Material
Finish Finish
215-105ZN 215-105ZN
1.16 [29.5] 1.16 [29.5]
.04 [1.0] .04 [1.0]
steel steel
zinc plated zinc plated
215-105SS 215-10555
1.16 [29.5] 1.16 [29.5]
.05 [1.3] .05 [13]
stainless stainless steel steel
electropolished electropolished
215-105BK 215-105BK
1.16 [29.5] 1.16 [29.5]
.04 [1.0] .04 [1.0]
steel steel
black black matte matte
215-120ZN 215-120ZN
1.16 [29.5] 1.16 [29.5]
.06 [1.5] .06 [1.5]
steel steel
zinc plated zinc plated
215-120SS 215-12055
1.16 [29.5] 1.16 [29.5]
.06 [1.5] .06 [1.5]
stainless stainless steel steel
electropolished electropolished
215-120BK 215-120BK
1.16 [29.5] 1.16 [29.5]
.06 [1.5] .06 [1.5]
steel steel
black black matte matte
215-110ZN 215-110ZN
1.66 [42.2] 1.66 [42.2]
.04 [1.0] .04 [1.0]
steel steel
zinc plated zinc plated
215-110SS 215-11055
1.66 [42.2] 1.66 [42.2]
.05 [1.3] .05 [13]
stainless stainless steel steel
electropolished electropolished
215-110BK 215-110BK
1.66 [42.2] 1.66 [42.2]
.04 [1.0] .04 [1.0]
steel steel
black black matte matte
215-125ZN 215-125ZN
1.66 [42.2] 1.66 [42.2]
.06 [1.5] .06 [1.5]
steel steel
zinc plated zinc plated
215-125BK 215-125BK
1.66 [42.2] 1.66 [42.2]
.06 [1.5] .06 [1.5]
steel steel
black black matte matte
215-115SS 215-11555
2.16 [54.9] 2.16 [54.9]
.05 [1.3] .05 [13]
stainless stainless steel steel
electropolished electropolished
215-130ZN 215-130ZN
2.16 [54.9] 2.16 [54.9]
.06 [1.5] .06 [1.5]
steel steel
zinc plated zinc plated
215-130BK 215-130BK
2.16 [54.9] 2.16 [54.9]
.06 [1.5] .06 [1.5]
steel steel
black black matte matte
and keeper keeper must be on on the the same same plane Ilatch latch and must be plane
.42 10.7 .42[10.7]
Medium Over Over Center Center Latches Latches with Tab Down Medium with Tab Down Lever Lever
I•
47.8 1.88 [47.8] 1.88
.47 11.9 .47 [11.9]
1.50 [38.1] 38.1 1.50
.059 ass [11.50 .so] .172 [4.37] 4.37 0.172 (2) HOLES HOLES (2)
THICKNESS THICKNESS
LENGTH LENGTH (SEE TABLE) (SEE TABLE)
.89 [22.5] 22.5 .89
.57 14.5 .57 [14.5] "-=
.69 17.55] .69 [17
.42 [10.7] 10.7 .42
Part Number Part Number
Length Length
Thickness Thickness
Material Material
Finish Finish
215-205ZN 215-205ZN
1.16 [29.5] 1.16 [29.5]
.04 [1.0] .04 [1.0]
steel steel
zinc plated zinc plated
215-205SS 215-20555
1.16 [29.5] 1.16 [29.5]
.05 [1.3] .05 [13]
stainless stainless steel steel
electropolished electropolished
215-205BK 215-205BK
1.16 [29.5] 1.16 [29.5]
.04 [1.0] .04 [1.0]
steel steel
black black matte matte
215-220ZN 215-220ZN
1.16 [29.5] 1.16 [29.5]
.06 [1.5] .06 [1.5]
steel steel
zinc plated zinc plated
215-220BK 215-220BK
1.16 [29.5] 1.16 [29.5]
.06 [1.5] .06 [1.5]
steel steel
black black matte matte
215-210ZN 215-210ZN
1.66 [42.2] 1.66 [42.2]
.04 [1.0] .04 [1.0]
steel steel
zinc plated zinc plated
215-210SS 215-21055
1.66 [42.2] 1.66 [42.2]
.05 [1.3] .05 [13]
stainless stainless steel steel
electropolished electropolished
215-210BK 215-210BK
1.66 [42.2] 1.66 [42.2]
.04 [1.0] .04 [1.0]
steel steel
black black matte matte
215-225ZN 215-225ZN
1.66 [42.2] 1.66 [42.2]
.06 [1.5] .06 [1.5]
steel steel
zinc plated zinc plated
215-225BK 215-225BK
1.66 [42.2] 1.66 [42.2]
.06 [1.5] .06 [1.5]
steel steel
black black matte matte
215-215SS 215-21555
2.16 [54.9] 2.16 [54.9]
.05 [1.3] .05 [13]
stainless stainless steel steel
electropolished electropolished
215-230ZN 215-230ZN
2.16 [54.9] 2.16 [54.9]
.06 [1.5] .06 [1.5]
steel steel
zinc plated zinc plated
215-230BK 215-230BK
2.16 [54.9] 2.16 [54.9]
.06 [1.5] .06 [1.5]
steel steel
black black matte matte
latch and keeper must be on the same plane
Medium Over Over Center Center Latches Latches with Padlock Hole Medium with Padlock Hole
3.00 .118 [3.00] 0.118 (2) HOLES HOLES (2)
.94 [23.9] 23.9 .94
1.91 [48.5] 48.5 1.91
.323 [8.20] 8.20 0.323 (2) HOLES HOLES (2)
.56 [14.2] 14.2 .56
1.50[38.1 38.1 ] k- 1.50
1.50 .059 [1.50] .059
.69 17.5 .69 [17.5]
THICKNESS THICKNESS
10.7 .42 42 [10.7]
.172 [4.37] 4.37 0.172 (2)) HOLES HOLES (2
.89 22.5 .89 [22.5] .57 14.5 .57 [14.5] LENGTH LENGTH (SEE TABLE) (SEE TABLE)
138 138
Download Download 31:Immo @@www.spep.com www.spep.com
Part Number Part Number
Length Length
Thickness Thickness
Material Material
Finish Finish
215-305ZN 215-305ZN
1.16 [29.5] 1.16 [29.5]
.04 [1.0] .04 [1.0]
steel steel
zinc plated zinc plated
215-305SS 215-30555
1.16 [29.5] 1.16 [29.5]
.05 [1.3] .05 [13]
stainless stainless steel steel
electropolished electropolished
215-305BK 215-305BK
1.16 [29.5] 1.16 [29.5]
.04 [1.0] .04 [1.0]
steel steel
black black matte matte
215-320BK 215-320BK
1.16 [29.5] 1.16 [29.5]
.06 [1.5] .06 [1.5]
steel steel
black black matte matte
215-320ZN 215-320ZN
1.16 [29.5] 1.16 [29.5]
.06 [1.5] .06 [1.5]
steel steel
zinc plated zinc plated
215-310ZN 215-310ZN
1.66 [42.2] 1.66 [42.2]
.04 [1.0] .04 [1.0]
steel steel
zinc plated zinc plated
215-310SS 215-31055
1.66 [42.2] 1.66 [42.2]
.05 [1.3] .05 [13]
stainless stainless steel steel
electropolished electropolished
215-310BK 215-310BK
1.66 [42.2] 1.66 [42.2]
.04 [1.0] .04 [1.0]
steel steel
black black matte matte
215-325ZN 215-325ZN
1.66 [42.2] 1.66 [42.2]
.06 [1.5] .06 [1.5]
steel steel
zinc plated zinc plated
215-325BK 215-325BK
1.66 [42.2] 1.66 [42.2]
.06 [1.5] .06 [1.5]
steel steel
black black matte matte
215-315SS 215-31555
2.16 [54.9] 2.16 [54.9]
.05 [1.3] .05 [13]
stainless stainless steel steel
electropolished electropolished
215-330ZN 215-330ZN
2.16 [54.9] 2.16 [54.9]
.06 [1.5] .06 [1.5]
steel steel
zinc plated zinc plated
215-330BK 215-330BK
2.16 [54.9] 2.16 [54.9]
.06 [1.5] .06 [1.5]
steel steel
black black matte matte
latchand andkeeper keepermust mustbe be on on the the same same plane I latch plane
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industrial Hardware Hardware
Material Material
Finish Finish
215-K01ZN 215-K01ZN
steel steel
zinc plated zinc plated
215-K01SS 215-K0155
304SS 304SS
electropolished electropolished
215-K01BK 215-K01BK
steel steel
.17 4.4 .17[4.4
.38 9.5 38[9.5]
D
.69 17.5 69[17.5]
.172 4.37 HOLE HOLE 0.172[4.37] (4) PLACES PLACES (4)
black black matte matte
A
A A
.74 18.9 .74[18.9]
.172 4.37 0.172[4.37] LOCATOR DIMPLE LOCATOR DIMPLE
usedwith withmedium mediumlatches latcheson onpage page138 138(sold (sold separately) separately) I used
Latches
Keepers Keepers with with (1) (1) Hole Hole and and Locating Locating Dimple Dimple Part Number Part Number
.38 9.5 .38[9.5] MOUNTING DIMENSIONS DIMENSIONS MOUNTING
.87 22.0 ] .87[22.0 .059 1.50 ] .059[1.50 .31 7.9 .31[7.9]
CATCH CATCH LENGTH LENGTH 1.16 1.16 [29.5] [29.5] 1.66 1.66 [42.2] [42.2] 2.16 [54.9] 2.16 [M.9]
D D 1.50 [38.1] [38.1] 1.50 2.00 [50.8] [50.8] 2.00 2.50 [63.5] [63.5] 2.50
Keepers Keepers with with (2) (2) Holes Holes Part Number Part Number
Material Material
Finish Finish
215-K02ZN 215-K02ZN
steel steel
zinc plated zinc plated
215-K02SS 215-K0255
304SS 304SS
electropolished electropolished
215-K02BK 215-K02BK
steel steel
black black matte matte
.17 4.4 .17[4.4]
A A
A
D
.69 17.5
.38 9.5 ] .38[9.5
.172 4.37 HOLE HOLE 0.172[4.37] (4) PLACES
.74 18.9 .74[18.9
.172 4.37 0.172[4.37] (2) HOLES HOLES (2)
.38 9.5
usedwith withmedium mediumlatches latcheson onpage page138 138(sold (sold separately) separately) I used
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
.87 22.0 .87[22.0] .059 1.50 .059[1.50]-i
.31 7.9 .31[7.9]
CATCH CATCH LENGTH LENGTH 1.16 [29.5] [29.5] 1.16 1.66 [42.2] [42.2] 1.66 2.16 [54.9] [54.9] 2.16
D D 1.50 [38.1] 1.50 [38.1] 2.00 [50.8] [50.8] 2.00 2.50 [63.5] [63.5] 2.50
Keepers Keepers with with (1) (1) Hole Hole Part Number Part Number
Material Material
Finish Finish
215-K03ZN 215-K03ZN
steel steel
zinc plated zinc plated
215-K03SS 215-K0355
304SS 304SS
electropolished electropolished
215-K03BK 215-K03BK
steel steel
black black matte matte
■
D
.69 17.5
.17 4.4 17[4
.172[4.37 4.37] HOLE HOLE 0.172 (3)PLACES PLACES (3)
A
A A
.74 18.9 ] .74[18.9
.172 4.37 0.172[4.37]
usedwith withmedium mediumlatches latcheson onpage page138 138(sold (sold separately) separately) I used
MOUNTINGDIMENSIONS DIMENSIONS MOUNTING
.87 22.0 .87[22.0]
D D 1.88[47.6] [47.6] 1.88 2.38[60.3] [60.3] 238 2.88[73.0] [73.0] 2.88
CATCH LENGTH
.059 1.50 ] .059[1.50
.31 7.9 .31[7.9]
1.16[29.5] [29.5] 1.16 1.66 [422] [42.2] 1.66 2.16[54.9] [54.9] 2.16
Keepers Keepers with with (2) (2) Holes Holes Part Number Part Number
Material Material
Finish Finish
215-K04ZN 215-K04ZN
steel steel
zinc plated zinc plated
215-K04SS 215-K0455
304SS 304SS
electropolished electropolished
215-K04BK 215-K04BK
steel steel
black black matte matte
.38 9.5 9.5 ] .38[
.42 10.7 .42[10.7]
A
A A
D
.69 17.5
.172 4.37 HOLE HOLE 0.172[4.37] (4) PLACES PLACES (4)
.74 18.9 ] .74[18.9
.172 4.37 0 .172[4.37]
(2) HOLES HOLES (2)
.38 9.5
usedwith withmedium mediumlatches latcheson onpage page138 138(sold (sold separately) separately) I used
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
.87 22.0 .87[22.0] .059 1.50 .059[1.50]-i .25 6.4 ] .25[6.4
CATCH LENGTH CATCH LENGTH
D .63 [15.9] [15.9] .63 1.13 1.13 [28.6] [28.6] 1.63 1.63 [41.3] [41.3]
1.16 [29.5] [29.5] 1.16 1.66 [42.2] [42.2] 1.66 2.16 [54.9] [54.9] 2.16
Button Button Keepers Keepers Part Number Part Number
Material Material
Finish Finish
215-K08ZN 215-KO8ZN
steel steel
zinc plated zinc plated
215-K08SS 215-K0855
304SS 304SS
electropolished electropolished
215-K08BK 215-KO8BK
steel steel
black black matte matte
.69
D
17.5
.427 10.84
A
.172[437 4.37] HOLE HOLE 0.172 (3) RACES PLACES (3)
A
.180 4.57
usedwith withmedium mediumlatches latcheson onpage page138 138(sold (sold separately) separately) I used
.25 6.4 lir .25[6.4]
MOUNTINGDIMENSIONS DIMENSIONS MOUNTING CATCH LENGTH
1.16[29.5] [29.5] 1.16 1.66 [422] [42.2] 1.66 2.16[54.9] [54.9] 2.16
8.1 0 .32 .32[8.1]-.-
D D
1.16[29.4] [29.4] 1.16 1.66[42.1] [42.1] 1.66 2.16[54.8] [54.8] 2.16
Secondary/Safety Latch Secondary/Safety Latch Material Material
Finish Finish
215-015ZN 215-015ZN
Part Number Part Number
spring steel spring steel
black black e-coat e-coat
215-015SS 215-01555
stainless steel stainless steel
black black e-coat e-coat
.41 10.4 -•-.1 .41 [10.4]
.172 4.37 0.172[4.37] JI
usedwith with medium medium latches latches on I used on page page 138 138 (sold (sold separately) separately) .41 10.5 .41 [10.5]
.50 12.7 .50 [12.7]
.74 [18.7] 18.7 .74 .53 13.5 .53 [13.5]
1r' SECONDARY/SAFETY CATCH
.017 .42 .017[.42] Request Info
1-800-453-1692 www.aboveboardelectronics.com
.57 [14.4] 14.4 .57
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
139
Latches
SIEP"1 PACIFIC ENGINEERING AND PRODUCTS
Small Center Latches Latches Small Over Over Center Part Number Part Number 47.5 1.87 [47.5] 7.2 .28 [7.2]
.31 [7 7.9 .31 .9]
.030H[.76] .76 .030 THK. TK.
40PY
Material Material
Finish Finish
215-010ZN 215-010ZN
steel steel
zinc plated zinc plated
215-010SS 21 5-01 055
stainless steel stainless steel
passivated passivated
latchand andkeeper keepersurfaces surfaces must must be be on on the the same same plane I latch plane see below below for for keeper keeper options I see options
.,.85 .85 [21.6] 21.6 -I.] .035[] .035 .90 THK THK. .87 22.1 -1 .87[22.1]
.37 9.5 .37[9.5]
12.7 .50 [12.7]
.33 8.3 .33[8.3]
.130 3.30 0.130[3.30 (2) HOLES
6.0 .23 [6.0]
Keepers with Keepers with (1) (1) Hole Hole and and Locating Locating Dimple Dimple Part Number Part Number .22 5.5 .22[5.5]
A
A
S , .42 10.8 .42110.81
.374 9.50 .374[9.50]
1.079 27.40 1.079[27.40]
.128 3.25 HOLE HOLE 0.128[3.25]
.128 3.25 HOLE HOLE 0.128[3.25] (2) PLACES
LOCATOR DIMPLE
.09 2.3 .09[ 2.3 ]-.-1
.50 12.6] 12.6 .50[
.130 3.30 HOLE HOLE 0.130[3.30] (2) PLACES
.18 4.6 .18[4.6] .033 .84 j .033[.84] THK. THK
Material Material
Finish Finish
215-K10ZN 215-K10ZN
steel steel
zinc plated zinc plated
215-K10SS 215-K1055
304SS 304SS
passivated passivated
usedwith withsmall smalllatches latcheson onthis thispage page(sold (sold separately) separately) I used
.219 5.56 .219[5.56]
MOUNTING DIMENSIONS
MOUNTING DIMENSIONS
SECTION A-A
SECTION A-A
Keepers with Keepers with (1) (1) Hole Hole Part Number Part Number .09 2.3 .09[2.3]
A A
A A
f
1.299 33.00 1299[33.00]
.374 9.50 .374[9.50] .42 10.8 .42110.8
,
Material Material
Finish Finish
215-K13ZN 215-K13ZN
steel steel
zinc plated zinc plated
215-K13SS 215-K1355
304SS 304SS
passivated passivated
usedwith withsmall smalllatches latcheson onthis thispage page(sold (sold separately) separately) I used
.128 3.25 HOLE HOLE 0.128[3.25] .50 12.6 .50[12.6] .18 4.6 .18[4S] .033 .84 ] .033[.84 THK.
.130 3.30 HOLE HOLE 0.130[3.30] (2) PLCS.
.128 3.25] 3.25 HOLE HOLE 0.128
MOUNTING DIMENSIONS
MOUNTING DIMENSIONS
SECTION A-A
SECTION A-A
Keepers with Keepers with (2) (2) Holes Holes Part Number Part Number .22 5.6 .22[5.6] .374 9.50 .374[9.50]
A
A
AL
.128 3.25 0.128[3.25] (2) HOLES
.128 3.25 .25] HOLE 45 .128[3 (2) PLACES
.25 6.4 .25[6.4]
.50[12.7] .50 12.7 .030 .76 ] .030[ THK.
.579 14.70 .579[14.70]
.42 10.7 .42[10.7]
.14 3.6 i-.14[3.6]
.130 3.30 HOLE HOLE 0.130[3.30] (2) PLACES
Material Material
Finish Finish
215-K14ZN 215-K14ZN
steel steel
zinc plated zinc plated
215-K14SS 215-K1455
304SS 304SS
passivated passivated
usedwith withsmall smalllatches latcheson onthis thispage page(sold (sold separately) separately) I used
.219 5.56 219[5.56]
MOUNTING DIMENSIONS
MOUNTING DIMENSIONS
SECTION A-A
SECTION A-A
Button Keepers Keepers Button Part Number Part Number .300 7.62 A
.374 9.50 .374[9.50]
.858 21.80 858[21.80]
A
.200 5.08 ] 0 .200[5.08
SECTION A-A
SECTION A-A
Finish Finish
215-K18ZN 215-K18ZN
steel steel
zinc plated zinc plated
215-K18SS 215-K1855
304SS 304SS
passivated passivated
usedwith withsmall smalllatches latcheson onthis thispage page(sold (sold separately) separately) I used
.129 3.26 HOLE
.14 3.6
Material Material
.130 3.30 HOLE HOLE 0.130[3.30] (2) PLCS.
.128 3.25 HOLE HOLE 0.128[3.25]
MOUNTING DIMENSIONS
MOUNTING DIMENSIONS
Request Info
1-800-453-1692 www.aboveboardelectronics.com
140
Download Download
3DMODELS @@ www.spep.com www.spep.com
Hinges Hinges and and Industrial Industrial Hardware Hardware
Length Length
Thickness Thickness
Material Material
Finish Finish
215-310SS05 215-3105505
1.66 [42.1] [42.1] 1.66
.05 [1.3] [1.3] .05
304SS 304SS
electropolished electropolished
latch and and keeper keeper must must be be on on the the same same plane I latch plane seepage page139 139 for for keeper I see keeper
,.....41100 -/ $1111v 2.34 59.5 2.34 [59.5] -.
Latches
Padlockable MediumOver OverCenter CenterLatch Latch Medium 4110 Padlockable
Part Part Number Number
.409 [10.40] 10.40 0.409 .98 [25.0] 25.0 .98
.55 14.1 .55[14.1]
1.94 49.4 k-1.94 [49.4]
.059 [1.50] 1.50 .059
.05 [1.2] 1.2 .05
.172 [4.37] 4.37 0.172 (2) HOLES (2) HOLES
1.66 42.1 1.66 [42.1] -1
.89 [22.5] 22.5 .89
.57 [14.5] 14.5 .57
.69 [17.5] 17.5 .69
.42 [10.7] 10.7 .42
Small Over Over Center Center Latch Latch Small Small Locking Locking Latch Latch Small Part Part Number Number
Finish Finish
237-LK 237-LK
satin chrome satin chrome
237CH-LK 237CH-LK
bright bright chrome chrome
237BK-LK 237BK-LK
black black powder powder coated coated
1.04 [26.5] 26.5 1.04
2.54 [64.5] 64.5 2.54
material: die die cast cast zinc zinc I material: stainless steel steel components I stainless components tworinged ringeddouble doublebitted bittedkeys keys(code: (code:K08) K08) I two includes die die cast cast zinc zinc keeper I includes keeper includes dust dust shutter I includes shutter
TOP T OP VIEW
.67 17.0 .67[17.0]
0 FRONT VIEW FRONT VIEW .122 3.10 HOLE HOLEWITH WITH 0.122[3.10]
Small Small Non-Locking Non-Locking Latch Latch Part Part Number Number
Finish Finish
237 237
satin chrome satin chrome
237CH 237CH
bright bright chrome chrome
237BK 237BK
black black powder powder coated coated
.236[6.00] [6.00] xx 90° 90 C'SINK C'SINK 0.236 (2) PLACES, SIDE (2) PLACES, OPPOSITE OPPOSITE SIDE
.47 12.0 in 1.18[30.0] 1.18 30.0 .47[12.0]
.47 12.0 .47[12.0] CENT. CENT.
I
AL-
I
I
III]
.47[12.0 ] CENT. CENT.
.122[3.10] 3.10 HOLE HOLEWITH WITH 0.122 .217[5.51] [5.51] xx 100° 100 C'SINK C'SINK 0.217 (4) SIDE (4) PLACES, PLACES, OPPSITE OPPSITE SIDE BOTTOM VIEW BOTTOM VIEW
Large Latch Large Over Over Center Center Latch Large Latch Large Locking Locking Latch Part Part Number Number
238-LK 238-LK
Finish Finish satin chrome satin chrome
238CH-LK 238CH-LK
bright bright chrome chrome
238BK-LK 238BK-LK
black black powder powder coated coated
1.26 1.26 [32.1] 32.1
3.00 [76.2] 76.2 3.00
material: die die cast cast zinc zinc I material: stainless steel steel components I stainless components tworinged ringeddouble doublebitted bittedkeys keys(code: (code:K08) K08) I two includes die die cast cast zinc zinc keeper I includes keeper includes dust dust shutter I includes shutter
TOP T OP VIEW
.83 21.1 .83[21.1]
FRONT VIEW FRONT VIEW
.47 12.0
1.40 35.5
Large Latch Large Non-Locking Non-Locking Latch Part Part Number Number
Finish Finish
238 238
satin chrome satin chrome
238CH 238CH
bright bright chrome chrome
238BK 238BK
black black powder powder coated coated
.63 16.0 CENT.
.126 3.20]HOLE HOLEWITH WITH 0.126[3.20 .268[6.81] [6.81] xx 100° 100 C'SINK C'SINK 0.268 (2) SIDE (2) PLACES, PLACES, OPPOSITE OPPOSITE SIDE
.63 CENT.
.134[3.400] 3.400 HOLE HOLEWITH WITH 0.134 .220[5.59] [5.59] xx 82° 82 C'SINK C'SINK 0.220 (4) PLACES, SIDE (4) PLACES, OPPOSITE OPPOSITE SIDE BOTTOM VIEW BOTTOM VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
141
Latches
SIERRA PACIFIC 00-----rERING
-", PRODUCTS
Over Center Center Latch Latch with Padlock Eye Eye Over with Padlock Latch Latch
2.67 67.8 .69 17.5 .69[ 17.5]
ti
Part Number Material Part Number Material
2189SS 218955
SIDE VIEW
Finish Finish
304SS electropolished 304SS electropolished
.375"diameter diameterpadlock padlock hole hole I 375"
111.1it
1.17 29.8 .69[17.4] .69 17.4 1.17[29.8]
.39 9.8 .39[9.8]
.75 19.1
.129 3.28 0.129[3.28] (2) HOLES
BOTTOM VIEW BOTTOM VIEW
Striker Striker .75 19.1 .75[19.1]
.047 1.20 .047[1.20]
Part Number Material Part Number Material
2188SS01 21885501
SIDE SIDE VIEW VIEW
accepts .125" .125" rivet I accepts rivet .129 3.28 0.129[3.28] (2) HOLES
1.22 31.0 .94[24.0] .94 24.0 1.22[31.0]
•
Heavy Duty Duty Draw Draw Pull Pull Latch Latch Heavy
BOTTOM VIEW BOTTOM VIEW
Part Number Part Number
Finish Finish
304SS 304SS
mill mill
B
.079 [2 2.00 _._.0711 .00] THK. 1..11(
.268 6.80 HOLES HOLES WITH WITH 0.268[6.80] .417 [10.60] [10.60] x 90 0.417 90° C'SINK CSINK (4) PLCS.
Pt4
Material Material
2065SS 206555
.79 20.0 —.-1.79 [20.0] h-
1.22 [31.0] 31.0
Finish Finish
304SS electropolished 304SS electropolished
.47 12.0
1.14 29.0
.55 14.0
.71 18.0
.91 [23.0] 23.0 .91
22.7 .89 [22.7]
FRONT VIEW FRONT VIEW
SECTION B-B B-B SECTION
B
REAR VIEW VIEW REAR
Adjustable Plastic Plastic Draw Latch Adjustable Draw Latch Part Number Part Number
239BK 239BK
Description Description
Material Material
Finish Finish
latch and and keeper keeper latch
glass reinforced glass reinforced acetal acetal
lightly textured lightly textured black black
concealed keeper keeper I concealed
3.78 96.0 .56 14.3 .58[14.3]
twee
.76 19.3
•
.11/.4
.937 23.80 .937[23.80]
.205 5.21 HOLE HOLE 0205[521] PLCS. (5) PLCS.
.40 10.2 -.40[10.2] SECTION A-A A-A SECTION
.205 5.21 0.205[5.21] (3) HOLES (3) HOLES
.94 23.8 94[23.8]
.82 20.8 .82[20.8]
Ø.205 5.21] HOLE HOLE WITH 9.205[5.21 Ø.335 [8.50] xx .16 .335 [8.50] .18 [4.2] [4.2] C'BORE CBORE (2) PLACES PLACES
.75 19.0 .75[ 19.0] 1.67 42.5 1.87[42.5]
.748 19.00 .748[19.00]
S
.811±.16 20.60±4 ] .911H:10060H4
A A
.75 19.0 1.24[31.5] 1.24 31.5 .75[19.0]
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Request Info
142
Download www.spep.com Download3DmoDELs @ @ www.spep.com
.748 19.00 .748[19.00]
1-800-453-1692 www.aboveboardelectronics.com
Hinges and bfrrdWare "`-tees and Industrial Industrial Hardware
Part Part Material Number Material Number
Finish Finish
Grip Grip
221ZN 221ZN
steel steel
221SS 22155
304SS electropolished electropolished no 304SS no
221ZN1 221ZN1
steel steel
221SS1 221551
304SS electropolished electropolished yes yes 304SS
zinc plated zinc plated
zinc plated zinc plated
.10 [2.5] 2.5 0.10 THRU HOLE THRU HOLE
.17 [4.3] 4.3 0.17
.78 [19.8] 19.8 .78
no no
.66 [16.7] 16.7 .66 .059 [1.50] 1.50 .059 2.66 [67.6] 67.6 2.66
10.1 .40 [10.1]
yes yes
1.5 [39] MIN. MAX. 2.3 [59] MAX
1.00 [25.4] 25.4 1.00
yellowvinyl vinyl grip: grip: .060 .060 [1.52] I yellow [1.52] thick, thick,dimensions dimensions shown are are without shown without grip grip wire sealing sealing feature I wire feature
Latches
Small Hook Over Over Center Small Adjustable Adjustable Hook Center Latches Latches
.94 [23.9] 23.9 .94 .209 5.31 0.209[5.31] (2) HOLES HOLES
Small Ball Over Small Adjustable Adjustable Ball Over Center Center Latches Latches with with Standard Standard Keeper Keeper Part Part Number Number
Material Material
Finish Finish
Grip Grip
224ZN 224ZN
steel steel
zinc plated zinc plated
no no
224SS 22455
304SS 304SS
electropolished electropolished
no no
224ZN1 224ZN1
steel steel
zinc plated zinc plated
yes yes
224SS1 224551
304SS 304SS
electropolished electropolished
yes yes
.10 [2.5] 2.5 0.10 THRU HOLE
0
.78 [19.8] 19.8 .059 059 [11.50 .50]
.17 [4.3] 4.3 0.17
-7--iff
1-
2.66 [67.6] 67.6 2.66
14.2 .56 [14.2] 1.0 to [25] MIN. 1.75 [44] MAX.
1.00 25.4 .00[25.4]
yellowvinyl vinyl grip: grip: .060 .060 [1.52] I yellow [1.52] thick, thick,dimensions dimensions shown are are without shown without grip grip wire sealing sealing feature I wire feature
.44 11.2 .44[11.2]
I
.94 23.9 .94 i3.9 .209 5.31 0.209[5.31] (2) HOLES
.50 12.77] 50 [12
.203 5.16 0.203[5.16] (2) HOLES
Small Adjustable Ball Over Over Center Small Adjustable Ball Center Latches Latches with with Cast Cast Keeper Keeper Part Part Number Number
224ZNB 224ZNB 224ZN1B 224ZN1B
Material Material
Finish Finish
steel steel
zinc plated zinc plated
steel steel
zinc plated zinc plated
Grip Grip
.10 2.5 0.10[2.5] THRU HOLE
.17 4.3 0.17[4.3]
19.8 .78 [19.8]
no no
.47 [12.0] 12.0 .47 .059 [1.50] 1.50 .059
yes yes
.51 [13.0] 13.0 .51
2.66 [67.6] 67.6 2.66
yellowvinyl vinyl grip: grip: .060 .060 [1.52] I yellow [1.52] thick, thick,dimensions dimensions shown are are without shown without grip grip wire sealing sealing feature I wire feature
.1 [29] MIN. 1.1 1.9 [48] MAX. MAX. .9 [48]
1.00 [25.4] 25.4 1.00
.94 23.9 .94[219]
.51 [13.0] 13.0 .51
M5 x .8 THD. .27 [7] DEEP (2) PLACES
.209 5.31 0.209[5.31] (2) HOLES
Medium Hook Over Over Center Medium Adjustable Adjustable Hook Center Latches Latches Part Part Number Number
Material Material
Finish Finish
Grip Grip
222SS 22255
304SS 304SS
electropolished electropolished
no no
222ZN1 222ZN1
steel steel
zinc plated zinc plated
yes yes
222SS1 222551
304SS 304SS
electropolished electropolished
yes yes
.13 [3.3] 3.3 0.13 THRU HOLE HOLE THRU
.27 [6.9] 6.9 0.27
1.26 32.0 1 26 [:2 0] 25.1 ..99 99[+ 1] .079 [2.00] 2.00 .079 4.46 [113.2] 113.2 4.46
yellowvinyl vinyl grip: grip: .060 .060 [1.52] I yellow [1.52] thick, thick,dimensions dimensions shown are are without shown without grip grip wire sealing sealing feature I wire feature
44.4 1.75 [44.4]
.60 [15.2] 15.2 .60
[80] MIN. 3.13 [8o] 4.44 [113] MAX.
39.5 1.56 [39.5] .268 6.80 0.268[6.80] (2) HOLES HOLES (2)
Medium Ball Over Medium Adjustable Adjustable Ball Over Center Center Latches Latches with with Standard Standard Keeper Keeper Part Part Number Number
Material Material
Finish Finish
Grip Grip
234ZN 234ZN
steel steel
zinc plated zinc plated
no no
234SS 23455
304SS 304SS
electropolished electropolished
no no
234ZN1 234ZN1
steel steel
zinc plated zinc plated
yes yes
234SS1 234551
304SS 304SS
electropolished electropolished
yes yes
yellowvinyl vinyl grip: grip: .060 .060 [1.52] I yellow [1.52] thick, thick,dimensions dimensions shown are are without shown without grip grip wire sealing sealing feature I wire feature
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.13 [3.3] 3.3 0.13 THRU HOLE
.27 [6.9] 6.9 0.27
1.26 [32.0] 32.0 1.26
19.1 .75 [19.1] .079 [2.00] 2.00 .079 4.46 [113.2] 113.2 4.46
.75 19.1 75 [19.1]
1.0 [25] MIN. MIN. to [25] 2.4 [61] [61] MAX. MAX. 2.4
1.75 [44 44.44] 1.75
1.56 39.5
-11111111 .268 6.80 0.268[6.80] (2) HOLES HOLES
.75 19.1 .75[19.1]
.266 [6.75] 6.75 0.266 (2) HOLES HOLES
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
143 143
Latches
PP"IfFla"-
-ERING AND PRODUCTS
Medium Adjustable Adjustable Under Under Center Center Latch Latch with Keeper Medium with Keeper Part Number Part Number
2172SS 217255
Material Material
Finish Finish
300 series series 300 stainless stainless steel steel
electropolished electropolished
workingload: load: 600 600 lb. I working lb. latchand andkeeper keepersurfaces surfaces must must be be on on the the same same plane I latch plane .200 [5.08] 5.08 0.200 (2) HOLES
92.5 3.64 [92.5]
15.9 .63 [15.9] CENT.
30.0 1.18 [30.0]
1.03 26.0 1.03[26.0]
22.2 .88 [22.2] 11.1 .44 [11.1] CENT.
5.08 0 .200 200 [5.08] (2) HOLES
.21 5.2 .21[5.2]
10.2 .40 110.21 36.3 1.43 [36.3]
TOP VIEW TOP VIEW
TOP TOP VIEW VIEW
63.5 MAX. MAX. GRIP 2.50 [63.5] 2.00 MIN. MIN. GRIP
.68 17.3 .68117.3]
20.1 .79 [20.1]
.39 9.8 39183]
.0984 r 0984 [2 2.500 500]
2.500 .098 [2.500]
.48 12.2 .48[122]
16.5 .65 [16.5]
3.18 [80.8] 80.8 3.18 FRONT VIEW VIEW FRONT
VIEW FFRONT R EW
Medium Adjustable Adjustable Under Under Center Center Latch Latch with Medium with Keeper Keeper Part Number Part Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
2172ZN-01 2172ZN-01
workingload: load: 500 500 lb. I working lb. latchand andkeeper keepersurfaces surfaces must must be be on on the the same same plane I latch plane .200 [5.08] 5.08 0200 (2) 2) HOLES
3.64 92.5
1.18 30.0
.63 15.9 CENT.
.44 11.1 .44[11.1] CENT.
.88 2] 22.2 1.03 26.0 1.08[26.0] .88[22
I I
l .200 5.08 (2) HOLES
.21 5.2 21 [5.2]
.40 10.2 1.43 36.3
TOP TOP VIEW VIEW
TOP VIEW TOP VIEW
2.50 63.5 MAX. MAX. GRIP GRIP 2.50[63.5] 2.00 [50.8] [50.8] MIN. MIN. GRIP
.68 17.3] 17.3 .68
.39 9.8 3918.8] .79 20.1
2.50 [.098 098 12.50]
.098 2.50 .098 [2.5K
.48 12.2 .79 [20.1] .48[12.2
.65 [16.51 16.5 .66
80.8 3.18 180.8]
FRONT VIEW VIEW FRONT
FRONT VIEW VIEW FRONT
Medium Adjustable Adjustable Under UnderCenter Center Latches Latches Medium
31655
Part Number Part Number
Description Description
Material Material
Finish Finish
latch latch
300 series series 300 stainless stainless steel steel
electropolished electropolished
latch latch
316SS 316SS
electropolished electropolished
keeper keeper
304SS 304SS
electropolished electropolished
2172SS-L01 217255-L01 2172SST-L01 217255T-L01 2172SS-K 217255-K
workingload: load: 600 600 lb. I working lb. latchand andkeeper keepersurfaces surfaces must must be be on on the the same same plane I latch plane keeperdetails detailsare are the the same same as as part 2172SS shown shown I keeper part number number 217255 above above .200 5.08
3.64 92.5 3.64 3.64 92.5 92.5
0.200 .200 [5.08] 5.08 (2) 2) HOLES (2) HOLES
.63 15.9 .63 1.18 30.0 .63 15.9 15.9 1.18 CENT.CENT. 1.18 30.0 30.0 CENT.
1.03 26.0 1.031263] 1.03 1.03 26.0 26.0
.88 22.2 SS [222] .88 22.2
I .200 5.08 .200 .200 5.08 5.08 (2) HOLES (2) (2) HOLES HOLES
1.43 36.3 1.43 1.43 36.3 36.3
17.3 .68 [17.3] .68 .68 17.3 17.3 .79 20.1 .19[20.1]
.79 .48 12.2 _48[12.2] .79 20.1 20.1 .48 .48 12.2 12.2
Download www.spep.com Download3DmoDELs @ @ www.spep.com
.44 11.1 44111.11 .44 11.1 CENT. CENT.
.21 5.2 21 .21 [5.2] 5.2
.40 10.2 .40 .40 10.2 10.2 TOP TOP VIEW TOP VIEW TOP VIEW VIEW
TOP _01EIN 1 VIEW TOP VIEW
3.10 [78.7] MAX. GRIP 2.862.50 72.6 MIN.MAX. GRIP 2.50 63.5 63.5 MAX. GRIP GRIP 2.00 2.00 [50.8] [50.8] MIN. MIN. GRIP GRIP
1:2F7821 .6=.GGRIL
.39 9.8 9.8 .39 [9.8]
.098 2.50 2.50 .098 [2.50]
.098 2.50 .09812.50] .098 2.50
.098 2.50
3.54 [89.91 89.9 3.54 3.18 3.18 80.8 80.8 FRONT VIEW VIEW FRONT FRONT FRONT VIEW VIEW
144
8
.65 16.5 16.5 .65 [16.5] FRONT FRONT VIEW FRONT VIEW VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and and Industrial Hardware Hardware
Part Part Number Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
2173ZN 2173ZN
keeperisis stainless stainless steel I keeper steel workingload: load: 1,000 1,000 lb. lb. I working latch and and keeper keeper surfaces surfaces must I latch must be be on on the the same same plane plane .200 [5.08] 5.08 0.200 (2) (2) HOLES HOLES
5.35 [135.9] 135.9 5.35
.75 19.1 ] 38.1 '75cLE19.1 1.50 [38.1] CENT.
1.27 [32.1] 32.1 1.50 1.50 38.1 38.1 1.27
.200 [5.08] 5.08 0.200 (2) HOLES (2) HOLES
.50 12.7 .50[12.7]
1111
.88 22.2 .88[22.2] CENT. CENT.
.31 [8.0] 8.0 .31
1.65 41.9 1.65 [41.9] TOP VIEW VIEW TOP
TOP VIEW VIEW TOP
3.88 98.6 MAX. MAX. GRIP GRIP 3.88[98.6] 3.00 [76.2] [76.2] MIN. MIN. GRIP GRIP 3.00
.78 [19.7] 19.7 .78
1.05 [26.6] 26.6 1.05
Latches
Large Under Center Center Latch Large Adjustable Adjustable Under Latch with with Keeper Keeper
.110 2.80 .110 [2.1:]/
.62 [15.9] 15.9 .62
.110 2.80 110 [2.80]
.53 [13.4] 13.4 .53 .95 [24.0] 24.0 .95
4.66 118.3 4.66 [118.3] FRONT VIEW FR 14/WIld
FRONT FRE T VIEW
Large Large Adjustable Adjustable Under Under Center Center Latches Latches Part Description PartNumber Number Description
2173SS-L01 217355-L01 2173SS-K 217355-K
Material Material
Finish Finish
latch latch
300 series 300 series stainless steel stainless steel
electropolished electropolished
keeper keeper
304SS 304SS
mill mill
workingload: load: 1,000 1,000 lb. lb. I working latch and and keeper keeper surfaces surfaces must I latch must be be on on the the same same plane plane keeperdetails details are are the the same same as shown 2173ZN shown I keeper as part part number number 2173ZN above above
.200 [5.08] 5.08 0.200 (2) (2) HOLES HOLES
5.35 135.9 5.35 135.9
.75 19.1 .75 19.1 1.50 38.1 1.50 38.1 CENT. CENT.
1.27 32.1 1.27 32.1 1.27 [32.1]
.200 5.08 .50 12.7 .200 5.08 (2) HOLES .50 12.7 (2) HOLES 1.65 41.9 1.65 41.9
.88 [22.2] 22.2 .88 CENT. CENT.
1.50 [8.1] 38.1 1.50
.31 [8.0] 8.0 .31
TOP 11 VIEW /IEWVIEW TOP
.78 [19.7] 19.7 .78
3.88 98.6 MAX. GRIP 4.75 120.6 MAX.MIN. GRIPGRIP 4.75[120.6] MAX. GRIP 3.00 [76.2] 3.60 [91.4] [91.4] MIN. MIN. GRIP GRIP 3.60
.78 19.7
1.05 26.6 1.05 26.6 1.05[26.6] .62 [15.9] 15.9 .62 15.9 .62
TOP VIEW VIEW TOP
.125 .125 181 .1103.18 2.80/
.110 110 2.80
t2.01
.53 13.4 ll .53[13.4]
7
t
1
5.52 140.3 5.52[140.3] 4.66 118.3
.95 24.0 .95 [24.0]
FRONT FRONT VIEWVIEW FRONT VIEW
FRONT VIEW FRONT VIEW
Adjustable Under Under Center Center Latches Adjustable Latches Part Part No. No.
Description Material Description Material
Finish Finish
2075ZN-L 2075ZN-L
latch latch
steel steel
yellow yellow zinc zinc plated plated
2075ZN-S 2075ZN-5
striker striker
steel steel
yellow yellow zinc zinc plated plated
workingload: load: 1500Ibs. 1500lbs. I working
5.00 [127.0] 127.0 5.00
1.05 26.7 1.05[26.7] .99 [25.2] 25.2 .99
.61 [15.5] 15.5 .61
.087 [2.22] 2.22 .087
3.28 [83.2] [83.2] MIN. MIN. 3.28 3.83 [97.2] [97.2] MAX. MAX. 3.83
.256 [6.50] 6.50 0.256 (2) (2) HOLES HOLES
1.85 47.0 .87[22.0] .87 22.0 1.85[47.0]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
2.25 [57.2] 57.2 2.25
30[7
.30 7.6 6] .087 .0872.20 [2.20] 1
.256 [6.50] 6.50 0.256 (2) HOLES (2) HOLES
2.50 63.5 2.50[63.5]
.31 8.0
2.00 50.8
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
145 145
Latches
SPrgeRA PACIFIC ENGINEERING AND PRODUCTS
Adjustable Under Under Center Center Latches Latches with with Kick-out Kick-out Adjustable 3.17 80.5 3.17[80.5]
2.74 69.5 2.74[69.5]
.50 12.6 1 .50[12.6]
1.06 26.9 -0.31[7.9] 1.06[26.9] .93 23.7 .93[23.7]
.31 7.9
6.3 .25 25[6.3] .53 13.5 .53[13.5] .65 16.5 1 .65[16.5] 2.20 2.20 [55.8] [55.8] MIN. MIN. 3.15 3.15 [80.0] [80.0]MAX MAX EXPOSED BASE EXPOSED BASE
1.06 [26.9] [26.9] MIN. MIN. 1.06 2.00 [50.8] [50.8] MAX MAX 2.00 CONCEALED BASE BASE CONCEALED .177 4.50 0.177[4.50] (2) HOLES
.177 4.50 0.177[4.50] (2) HOLES (2) HOLES
1.20 30.5 1.20[30.5] .39 9.9 .39[9.9]
.49 12.4 .49[12.4]
.63 16.0 .63[16.0]
1.07 27.2
1.13 28.6 I 1.13[28.6]
.55 14.0 .55[14.0]
LATCH KICKS LATCH HOOK HOOK KICKS OUT WHEN WHEN HANDLE HANDLE OUT IS PULLED BACK BACK IS PULLED .25 6.4 .25[6.4]
12.7 I .50 .50[12.7]
4.50 0..177 77[4.50] (2) HOLES HOLES (2) CONCEALED STYLE STYLE CONCEALED
KICKOUT KICKOUT FEATURE FEATURE EXPOSED STYLE EXPOSED STYLE
Features Features adjustablehook hookfor for different different reaches I adjustable reaches kick-out feature feature I kick-out
Standard Latches Standard Latches Part Number Part Number
Material Material
Finish Finish
Base Style Base Style
210-100ZN 210-100ZN
steel steel
zinc plated zinc plated
concealed concealed
210-100SS 210-10055
300 series 300 series stainless stainless steel steel
electropolished electropolished
concealed concealed
210-100SSBK 210-100SSBK
300 series 300 series stainless stainless steel steel
black black e-coat e-coat
concealed concealed
210-200ZN 210-200ZN
steel steel
zinc plated zinc plated
exposed exposed
210-200SS 210-20055
stainless steel stainless steel
electropolished electropolished
exposed exposed
210-200SSBK 210-200SSBK
stainless steel stainless steel
black black e-coat e-coat
exposed exposed
latch and and keeper keeper surfaces surfaces must must be on same I latch be on same plane plane
Latches Catch Latches with with Secondary Secondary Catch Material Material
Finish Finish
Base Style Base Style
210-110ZN 210-110ZN
Part Number Part Number
steel steel
zinc plated zinc plated
concealed concealed
210-110SS 210-11055
300 series 300 series stainless stainless steel steel
electropolished electropolished
concealed concealed
210-210ZN 210-210ZN
steel steel
zinc plated zinc plated
exposed exposed
210-210SS 210-21055
300 series 300 series stainless stainless steel steel
electropolished electropolished
exposed exposed
latch and and keeper keeper surfaces surfaces must must be on same I latch be on same plane plane
Latches Latches with with Padlocking Padlocking Hasp Hasp Material Material
Finish Finish
210-120ZN 210-120ZN
Part Number Part Number
steel steel
zinc plated zinc plated
Base Style Base Style concealed concealed
210-120SS 210-12055
300 series 300 series stainless stainless steel steel
electropolished electropolished
concealed concealed
210-220ZN 210-220ZN
steel steel
zinc plated zinc plated
exposed exposed
210-220SS 210-22055
300 series 300 series stainless stainless steel steel
electropolished electropolished
exposed exposed
latch and and keeper keeper surfaces surfaces must must be on same I latch be on same plane plane
Latch Latch Keepers Keepers Part Number Part Number
concealed concealed
exposed exposed
Material Material
Finish Finish
Keeper Style Keeper Style
210-K01ZN 210-K01ZN
steel steel
zinc plated zinc plated
concealed concealed
210-K01SS 210-K01SS
300 series 300 series stainless stainless steel steel
electropolished electropolished
concealed concealed
210-K01SSBK 210-K01SSBK
300 series 300 series stainless stainless steel steel
black black e-coat e-coat
concealed concealed
210-K02ZN 210-K02ZN
steel steel
zinc plated zinc plated
exposed exposed
210-K02SS 210-K0255
300 series 300 series stainless stainless steel steel
electropolished electropolished
exposed exposed
210-K02SSBK 210-KO2SSBK
300 series 300 series stainless stainless steel steel
black black e-coat e-coat
exposed exposed
latch and and keeper keeper surfaces surfaces must must be on same I latch be on same plane plane
146 146
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hir es and Hinges and Industrial Industri -1 Hardware Hardware
Material Material
Finish Finish
steel steel
zinc plated zinc plated
2066ZN 2066ZN .39 10.0 .157 4.00 (5) HOLES
.063 1.60
.39 [10.0] 10.0 .39
1.18 [30.0] 30.0 1.18
I max maxworking workingload: load: 27 27 lbs. lbs. catchdistance distancemay may be be adjusted adjusted with I catch with aa screwdriver screwdriver .98 25.0
A A
.063 [1.60] 1.60 - .063
r
.157 4.00 0.157[4.00] (5) HOLES HOLES (5)
.79 [20.0] 20.0 .79
Latches
Adjustable Draw Draw Pull Pull Latch Latch Adjustable Part Number Part Number
.98 [25.0] 25.0 .98
i
1.0 TRAVEL
.43 11.0 TRAVEL TRAVEL .43[11.0] .33 8.5
.33 [8.5] 8.5 .33
1.18 30.0 1.18[30.0]
1.18 30.0
.59 15.0
2.05 52.1
2.05 52.1
.98 25.0
29 83.5
3.29 83.5
1.54 50.2 1.54 [39.2] [39.2] -- 1.98 1.98 [50.2]
.98 [25.0] 25.0 .98
.063 1.60 THK.
.98 25.0
.063 1.60 THK. A
1.18 30.0 1. 8 [30.0]
.69 17.5
SECTION A-A
1.54 [39.2] - 1.98 5
1.18 30.0
.69 17.5
BOTTOM VIEW BOTTOM VIEW
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
SECTION A-A SECTION A-A
1.18 30.0 MOUNTING DIMENSIONS
Large Adjustable Draw Pull Pull Latch Latch Large Adjustable Draw Part Number Part Number
2068SS-01 206855-01
Material Material
Finish Finish
304SS 304SS
barrel polished barrel polished
30.0 11.18 .18 [30.0]
accepts up up to to 1/4!' 1/4" padlock padlock I accepts
14.0 .55 [14.0]
-+-.079 2.00 079 [2.00]
A
.49 12.5 .49[12.5]
.142[3.60] 3.60 HOLE HOLE WITH WITH 0.142 .256 [6.50] xx 82 0.256 82 •C'SINK MINK (2) PLACES
40.0 1.57 [40.0]
.39 10.0 2.36 60.0 2.56 1.97 50.0 .1:1 MOUNTING RANGE
13.0 .51 [13.0]
.87 [22.0] 22.0 .87
.295 [7.50] 7.50 0.295 FOR PADLOCK
2.48 63.0
.165 [4.20] 4.20 0.165 (2) HOLES A
1.17 29.8
.059 [1 1.50 .059 SO] 18.0 .71 [18.0]
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
SECTION A-A SECTION A-A
Small Latch Small Adjustable Adjustable Draw Draw Pull Pull Latch Part Number Part Number
2068SS-02 206855-02
Material Material
Finish Finish
304SS 304SS
barrel polished barrel polished .63 16.0
.43 11.0 .43[114
h
1.50 .059 [1.50]
A
1.06 27.0
.47 12.0 .47[125]
.150 3.80 HOLE HOLE WITH WITH 0.150[3.80] .256[6.50] [6.50] xx 82 82 • C'SINK 0.256 CSINK (2) PLACES .31 [8.0] 8.0 0.31
1.93 49.0 1.61 41.0 MOUNTING RANGE
.39 10.0 .63 16.0
40.5 1.59 40.5]
A
.87 22.2
.126 3.20 (2) HOLES
.039 [11.00 .039 .00]
MOUNTIING MOUNTIING DIMENSIONS DIMENSIONS
14.5 .57 [14.5] SECTION A-A SECTION A-A
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
147
-ERING AND
Latches
Sr":111, NMCIFICEN
Adjustable Draw Draw Pull Pull Latch Adjustable Latch with with Keeper Keeper Part Part Number Number
weld
rivet
Material Material
Finish Finish
A A
B
C
2160 2160
steel steel
zinc zinc
.708 .708 [17.98] [17.98]
2.03 2.03 [51.6] [51.6]
1.04 1.04 [26.4] [26.4]
2160SS 216055
304SS 304SS
polished polished
.708 .708 [17.98] [17.98]
2.03 2.03 [51.6] [51.6]
2162 2162
steel steel
zinc zinc
.672 .672 [17.07] [17.07]
2162SS 216255
304SS 304SS
polished polished
.672 .672 [17.07] [17.07]
D
E
F
G
H
Ø.191 [4.85] Ø.162[4.11] [4.11] .550 0.191 [4.85] 0.162 .550 w/82° c’sink w/82° c’sink [13.97] w/82° c'sink w/82° c'sink [13.97]
.94 .94 [23.88] [23.88]
[14.0] [14.0]
.84 .84 [21.3] [21.3]
Ø.195 [4.95] Ø.156[3.96] [3.96] .550 0.195 [4.95] 0.156 .550 w/82° c’sink w/82° c’sink [13.97] w/82° c'sink w/82° c'sink [13.97]
.94 .94 [23.88] [23.88]
.55 .55 [14.0] [14.0]
2.66 2.66 [67.6] [67.6]
1.68 1.68 [42.7] [42.7]
Ø.208 [5.28] Ø.208[5.28] [5.28] .688 0.208 [5.28] 0.208 .688 w/82° c’sink w/82° c’sink [17.48] w/82° c'sink w/82° c'sink [17.48]
1.19 1.19 [30.23] [30.23]
.66 .66 [16.7] [16.7]
2.66 2.66 [67.6] [67.6]
1.68 1.68 [42.7] [42.7]
Ø.208 [5.28] Ø.208[5.28] [5.28] .688 0.208 [5.28] 0.208 .688 w/82° c’sink w/82° c’sink [17.48] w/82° c'sink w/82° c'sink [17.48]
1.19 1.19 [30.23] [30.23]
.66 .66 [16.7] [16.7]
.55 .55
part numbers numbers 2162 and 2162SS I part 2162 and 216255 have have aa riveted riveted catch catch that that pivots pivots as as shown shown on on the the picture picture G E (2) HOLES HOLES (2) WITH 82 WITH 82° C'SINK CSINK
2160 & 2160SS 2160 & 216055 welded welded
2162 & 2162SS 2162 & 216255 riveted riveted
F
H
B C
A D D (2) HOLES HOLES (2) WITH 82 WITH 82° C'SINK CSINK
Adjustable Draw Draw Pull Pull Latch Adjustable Latch with with Keeper, Keeper, Padlocking Padlocking 20.3 .80 [20.3]
.66 16.7 .66[16.7]
.213 5.40 HOLE HOLE 0.213[5.40] ITH 82 82° C'SINK CSINK WITH (2) PLACES
Part Part Number Number
1.38 34.9 1.38[34.9]
.63 15.9
1.56 39.6
Material Material
Finish Finish
2168 2168
steel steel
zinc zinc
2168SS 216855
304SS 304SS
mill mill
acceptsup upto to5/16" 5/16” padlock padlock I accepts
.242 6.15 HOLE HOLE 0.242[6.15] WITH 82 82° C'SINK CSINK (3) PLACES
3.15 80.0 MAX.
1 2.24 57.0 2.24[57.0] MIN. es 7.46 [189.6 89.6]
.365 9.27 0.365[9.27] FOR PADLOCK
.88 22.4 1.70 43.2
O
TP
4.59 116.7 4.59[ 16.7]
59.8 2.36 [59.8]
11 1 .64[16.2] 11 .64 16.2
11.06 06[27.0] 27.0
68[17.2] .68 17.2
Adjustable Draw Draw Pull Pull Latch Adjustable Latch with with Keeper, Keeper, Padlocking Padlocking Part Part Number Number .79 [20.1] 20.1 .79
.58 14.7 .58[14.7]
1.19 30.2 1.19[30.2]
U
.195 4.95 HOLE HOLE 0.195[4.95] WITH 82 WITH 82° C'SINK CSINK (2) HOLES HOLES (2)
1.18 [30.0] 30.0 1.18
O
1.56 [39.7] 39.7 1.56 MIN. MIN.
\
/
2.32[58.8] 58.8 / 2.32 MAX. MAX.
Finish Finish
2167 2167
steel steel
zinc zinc
2167SS 216755
304SS 304SS
electropolished electropolished
316SS 316SS
electropolished electropolished
2167SST (NV 216755T
.197 5.01 HOLE HOLE 0.197[5.01] WITH 82 WITH 82° C'SINK CSINK (3) HOLES (3)
Material Material
acceptsup upto to5/16" 5/16” padlock padlock I accepts
(
5.03 [127.9 5.03 27.9] .365 [9.27] 9.27 0.365 FOR PADLOCK PADLOCK FOR
1.31 [33.2] 33.2 1.31
.71 [17.9] 17.9 .71
2.78 [70.6] 70.6 2.78
1.55 [39.4 39.4 1.55
148 148
Download 3DmoDELs @ @www.spep.com www.spep.com Download
.87 [22.0] 22.0 .87
10.4 .41 [10.4]
.38 [9.8] 9.8 .38
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and mnd Industrial Industri-1Hardware Hardware
2135ZN 2135ZN
Material Material
Finish Finish
steel steel
zinc plated zinc plated
.93 [23.5] 23.5 .93
1.57 [40.0] 40.0 1.57
.83 [21.0] [21.0] xx .24 [6.0] .83 .24 [6.0] OBROUND OBROUND
.236[6.00] 6.00 -4-.236
.71 18.0 .71 [18.0]
3.29 [83.5] 83.5 3.29
Latches
Adjustable Spring SpringLoaded LoadedDraw Draw Pull Pull Latch Latch Adjustable Part Part Number Number
5.05 [128.3 5.05 28.3] ADJUSTABLE ADJUSTABLE
1
.35 8.8
.335 [8.50] 8.50 0 .335 (3) (3) HOLES HOLES
3.23 82.0
2.60 [66.0] 66.0 2.60
.118 3.00 THK.
7.24 183.9
2.20 [56.0] 56.0 2.20
1.16 29.5
AdjustableDraw Draw Pull Pull Latch Latch Adjustable Part Part Number Number
2138ZN 2138ZN
Material Material
Finish Finish
steel steel
zinc plated zinc plated
23.5 .93 [23.5]
2.24 [6.0]
65.1 2.56 [65.1]
.83 [21.0] x .24 [6.0] OBROUND
.24 6.0
18.0 .71 [18.0]
features aa secondary secondary spring-loaded spring-loaded I features latch latch for for added added security security
1111 83.5 3.29 [83.5]
3.96 [100.5 00.5] ADJUSTABLE .38 9.7
1111 0 01‘ .354 [9.00] 9.00 0.354 (4) HOLES
4.17 106.0
65.1 2.56 [65.1]
(10 1 1110 8.78 223.1 .157 4.00 THK.
69.9 2.75 [69.9]
36.5 1.44 [36.5]
Part Part Number Number
2137ZN 2137ZN
92.0 3.62 [92.0]
ID
Material Material
Finish Finish
steel steel
zinc plated zinc plated
featuresaa chained chained cotter cotter pin pin for for I features added security security added
AdjustableDraw Draw Pull Pull Latch Latch Adjustable
2.56 65.0 2.56[65.0]
a[23.5] 6.0 .24 [6.o]
.93 23.5
p
.83 [21.0] [21.0] x x .24 .24 [6.0] [6.0] .83 OBROUND OBROUND
18.0 .71 [18.0] .71
3.29 [83.5] 83.5 3.29
5.18 131.5 5.18[ 31.5] ADJUSTABLE ADJUSTABLE
.43 11.0
.358 9.10 0.358[9.10] (2) HOLES HOLES (2)
1.18 30.0
.157 4.00 THK.
6.32 160.5
2.13 54.0
Request Info
1-800-453-1692 www.aboveboardelectronics.com
3.35 85.0 3 35[85 0]
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
149 149
Latches
SIERRA PfilIFIC ENGINEERING AND PRODUCTS
Protector Plates Plates for for Large Large Twist Twist Latches Latches Protector Part Number Part Number
6.25 158.8 6.25[158.8]
8 I ® 6 6 9
3.00 [76.2] 76.2 3.00
58.5 2.30 [58.5] 2.30
6 6 .205 5.21 0.205[5.21] (12) HOLES HOLES (12)
146.5 5.77 [146.5] 5.77 TOP VIEW TOP VIEW 3.33[84.5] 84.5 -.-3.33 .76 [19.3] 19.3 .76
-„N
Z.
.060 [1.52] 1.52 r .060
,
Material Material
Finish Finish
209BP 209B P
steel steel
zinc plated zinc plated
209BPSS 209B P55
304SS 304SS
electropolished electropolished
protectslatch latchfrom fromgetting gettingdamaged, damaged, accidentally accidentally I protects unlatching, or hooked on unlatching, or getting getting hooked on something something during during transportation transportation multiplemounting mountingholes holesfor forgreater greater adjustment adjustment I multiple options options largetwist twistlatches latchescan can be be ordered ordered installed I large installed on on protector plates protector plates
FRONT 1/IEW VIEW FRONT .75 19.1 .75[19.1]
.63 16.0 63 [16.0] .1.1[0:41
9 1
50.8 2.00 [50.8] 2.00
. .ark
9 .63 16.0 63[16.0]
1.06 27.0 -1.06[27.0]
BOTTOM VIEW BOTTOM VIEW
Large Spring Large Spring Loaded Loaded Twist Twist Latch Latch with with Padlocking Padlocking Keeper Keeper .22 5.6 22[58]
H
.22 5.5
1.62 41.1
.44 11.2
.19 4.8
Part Part Number Number
Description Description
Material Material
Finish Finish
209501SS 20950155
latch latch and keeper keeper and
300 series 300 series stainless steel stainless steel
tumbled tumbled
thespring springcompensates compensatesfor for up upto to.16 .16 [4.0] [4.0] I the misalignment misalignment
.65 16.5
2.00 50.8
.16 4.2
.37 9.4 TRAVEL
1.126 28.60 1.126[28.60]
1.941 49.30 1.941[49.30]
.84 21.4 .84[21.4]
.88 22.4
.750 19.05 .750[19.05]
.205 5.21 0.205[5.21] (8) HOLES HOLES (8)
1.576 40.04 1.576[40.04]
4.06 103.2
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
1.75 44.5
1.63 41.3 1.63[41.3]
.72 18.2
.31 7.9
2.75 [692] 69.9 2.75 82.6 3.25 [82.6]
1.73 43.9
Cam Locking Cam LockingTwist TwistLatch Latch 101) Part Part Number Number
208907 208907
Material Material
Finish Finish
steel steel
blue blue zinc zinc plated plated
stainlesssteel steel slide slide catch catch springs I stainless springs keyed different different I keyed canbe be used used with part no. I can with part no. 2096 2096 keeper keeper
•Nomil .e„.; .88 [22.3] 22.3 -1 .88 r-
10/41° 4160
3.28 83.2 1.63 41.3
.13 3.3 .13[3.3]
9.4 TRAVEL TRAVEL .37 [9A]
CAM LOCK
85.8 3.38 85.8]
1.13 28.6
.31 7.9
71.5 2.81 [71.5] TOP VIEW VIEW TOP
150 150
Download @www.spep.com www.spep.com Download31)moDELs @
1.05 26.7 1.05[26.7]kRIGHT RIGHT SIDE SIDE VIEW VIEW
5.21 0 .205 205 [521] (4) HOLES
.75 19.1 REAR REAR VIEW VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industrial Hardware bfrrdWare
Description Description
Material Material
Finish Finish
2098 2098
latch latch
steel* steel*
zinc plated zinc plated
2098SS 209855
latch latch
300 series 300 series stainless steel stainless steel
tumbled tumbled
steel steel
zinc plated zinc plated
2" wide wide r
2096 2096
keeper keeper
209601 209601 2096SS 209655 2099 2099
DI
steel steel
n
.31 7.9 .91[7.9] 1.48 37.6 .079 2.00 .079] .40 10.2 .40[102]
2.00 50.8 1-.-2.00[50.8]—•-1
.88 22.3 .88[22.3]
{
3" wide 3" wide keeper keeper
Latches
Large Large Twist Twist Latches Latches Part Part Number Number
.13 3.3
.37 9.4 TRAVEL .37[9.4]
zinc plated zinc plated H
2" wide wide r keeper keeper polybagged polybagged
304SS 304SS
tumbled tumbled
steel* steel*
zinc plated & zinc plated & tumbled tumbled
3.38 85.8
1.75 44.5 1.75[44.5]
*latch is is made made of of steel steel with with aa stainless stainless steel slide I *latch steel slide ►polybagged polybagged part part number number 2099 2099 contains contains one one 2098 2098 latch latch and one and one 2096 2096 keeper keeper per per sealed sealed polybag. polybag. seeillustration illustration below below for for mounting I see mounting hole hole details details
0
.36 9.1
1.63 41.3
.63 15.9 1.57 40.0
2.75 69.9 2.75[69.9]
Large Hex Cam Cam Large Twist Twist Latch Latch with with Hex Part Part Number Number
Description Description
Material Material
Finish Finish
209805 209805
latch latch
steel steel
zinc plated zinc plated
keeper keeper
steel steel
zinc plated zinc plated
2096 2096
.31 7.9 .31[7.9] 1.48 37.6 .079 2.00 .40 10.2
2.00 50.8 1-.-2.00[50.8
1.125 28.58 1.125[28.58]
2.438 61.93 2.438[61.93
.88 22.3 .88[22.3 h
.500 12.70 .500[12.70]
71-
.750 19.05 .750[ 19.05]
.13 3.3
.37 9.4 TRAVEL .37[9.4]TRAVEL
1.375 34.93 1.375[34.93]
.205 5.21 0 .205[5.21] (7) HOLES
rl
3.38 85.8
1.75 44.5 1.75[44.5]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
0
.31 7.9 .31[ 7 9] .77 19 19.6 .77] 6]
1.63 41.3 1.63[41.3]-.1 1.63 41.5] 41.5 -..-1.63[
2.75 69.9 2.75[69.9]
Large Large Spring Spring Loaded Loaded Twist Twist Latches Latches Part Part Description Material Material Number Description Number
2095 2095
Finish Finish .31 7.9 .31[7.9]
latch latch
steel* steel*
zinc plated zinc plated
latch latch
300 series 300 series stainless steel stainless steel
tumbled tumbled
2096 2096
keeper keeper
steel steel
zinc plated zinc plated
2096SS 209655
keeper keeper
304SS 304SS
tumbled tumbled
2097 2097
polybagged polybagged
steel steel
zinc plated zinc plated
2097SS 209755
polybagged 304SS polybagged 304SS
2095SS 209555
tumbled tumbled
seeillustration illustration above above for for mounting hole details I see mounting hole details thespring springcompensates compensatesfor forup uptoto.16 .16[4.0] [4.0] misalignment I the misalignment *part number number 2095 slide I *part 2095 is is steel steel with with stainless stainless slide part number number 2097 I part 2097 contains contains one one 2095 2095 latch latch and and one one 2096 keeper 2096 keeper per per sealed sealed polybag polybag part number number 2097SS I part 209755 contains contains one one 2095SS 209555 latch latch and and one 2096SS one 209655 keeper keeper per per sealed sealed polybag polybag
1.48 37.6 .079 2.00 ] .079[ .40 10.2 ] .40]
2.00 50.8 2.00[50.8]
t
.88 22.3 .88[22.3 .13 3.3
.37 9.4 ]TRAVEL TRAVEL .97[9.4
r i m ILWAI 3.38 85.8
1.75 44.5 1.75[44.5]
4: 11 .31 7.9 1[7.9] .78 19.88] 78[16
1.63 41.3 ]-.•-•-• 1.63[41.3 2.75 69.9 2.75[69.9]
1.73 43.9 43.9 ]-•---.-1.73[
3.25 82.6 3.25[82.6]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
151 151
Latches
PACIFY' -VGINEr-
PRODUCTS
Medium Twist Latches with Hex Hex Cam Cam Medium Twist Latches with Part Part Number Number
2089 2089
e e
.65[ 16.5 ; 6-51 -65
.063 1.60 .069[1.6
.25 6.4 25[6.4]
1.13 28.6 1.13[28.6]
Finish Finish
latch latch
steel steel
zinc plated zinc plated
2089BK01 2089BK01
latch latch
steel steel
208902* 208902*
latch latch
steel steel
zinc plated zinc plated
latch latch
steel steel
zinc plated zinc plated
2088 2088
keeper keeper
steel steel
zinc plated zinc plated
2088BK 2088BK
keeper keeper
steel steel
black black powder powder coated coated
.09 2.3
.37 9.4 TRAVEL
Part No. 208902* Part No. 208902* same as as part no. 2089 same part no. 2089 except twist wing wing except without without twist
Material Material
black black powder powder coated coated
208903** ESP 208903** .25 6.4 25[6A]
Description Description
.563 14.30 .583[14.30
2.05 52.0 2.05[52.0]
1.125 28.58 .125[28.58]
1.50 38.1 .68 17.3 .68[17.3]
.500 12.70 .500[12.70] .625 15.88 .825[15.88]
.77 19.5
1.32 33.5 1.92[33.5] 2.18 55.4 2.18[55.4]
1.55 39.3
.167 4.24 0.187[4.24] (5) HOLES HOLES (5) MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Part No. 208903** Part No. 208903** same as as part no. 208902 same part no. 208902 except slotted hex cap except slotted hex cap
Medium Spring Loaded Loaded Twist Twist Latches Latches with with Hex Hex Cam Cam Medium Spring Part Part Number Number
208905 208905 .25 6.4 .25[6A[
0 0
2088 2088
.65 16.5 .65[16.5]
.063 1.60 .063[1.60
latch latch
steel steel
zinc plated zinc plated
keeper keeper
steel steel
zinc plated zinc plated
.563 14.30
-1-
PM I (INM
Finish Finish
.09 2.3 .09[2.3]
.37 9.4 TRAVEL TRAVEL .97[9.4]
I
Material Material
thespring springcompensates compensatesfor forup upto to.156 .156 [4.00] [4.00] I the misalignment misalignment
.25 6.4
1.13 28.6 1.19[28.6]
Description Description
1.125 28.58
.500 12.70
2.05 52.1 2.05[52.1] 38.11] 11.50 50[ W
.625 15.88 .68 17.3 .68[17.3]
rd) imod
.167 4.24 0.187[4.24] (5) HOLES HOLES (5)
.77 19.5 .77[19.5]
1.32 33.5 132[99.5] 2.18 55.4 2.18[55.4]
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
1.55 39.3 ~--1551993
2.51 63.7 2.51[69.7]
Small Low Profile Small Low Profile Twist Twist Latches Latches .94 [23.9] 23.9 -0-- .94
9
Part Part Description Material Material Number Description Number
.051 1.3 .051[1.3]
2085 2085
latch latch
steel steel
zinc plated zinc plated
latch latch
300 300 series series stainless steel stainless steel
tumbled tumbled
2086 2086
keeper keeper
steel steel
zinc plated zinc plated
2086SS 208655
keeper keeper
304SS 304SS
tumbled tumbled
2086BK 2086BK
keeper keeper
steel steel
black black e-coat e-coat
1.27 [32.3] 32.3 1.27
2085SS 208555 1.13 28.7 1.13 [28.7]
.23 [5.9] 5.9 .23 KEEPER KEEPER
.69 117.51 17.5 .69 1.11 28.1
Finish Finish
.10 2.5
.25 6.4 .25[6.4] TRAVEL TRAVEL
.136 3.45 (4) HOLES
2.240 56.90
1.63 41.4
.560 14.22
.560 14.22
.42 [10.7] 10.7 .42
1.50 38.1 1.50 [38.1] LATCH LA TCH
152 152
Download 3DmoDELs @ @www.spep.com www.spep.com Download
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and and Industrial Industrial Hardware bfrrdWare
Description Description
Material Material
Finish Finish
209102 209102
latch latch
steel steel
zinc plated zinc plated
209103 209103
keeper keeper
steel steel
zinc plated zinc plated
latch latch
300 series 300 series stainless steel stainless steel
tumbled tumbled
209102SS 20910255 209103SS 20910355
keeper keeper
304SS 304SS
.047 [1.19] 1.19 .047
36.6 1.44 [36.6] 12.7 .50 [12.7]
20.6 .81 [20.6]
Latches
Small Twist Small Twist Latches Latches Part Part Number Number
5.0 .20 [5.0] KEEPER KEEPER
tumbled tumbled .69 [17.4] 17.4 .69
1 .130 3.30 0.130[3.30] (4) HOLES
.09 2.3
6.4 TRAVEL TRAVEL .25 [6.4]
1.281 32.54 1.281[32.54]
1.00 25.3 .437 11.10 .437[11.10]
.938 23.83 .938[2183]
.43 11.0 1.50 38.1
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
1.20 30.4 LATCH LATCH
Small Small Twist Twist Latches Latches with with Tri-shaped Tri-shaped Base Base Part Part Number Number
Description Description
Material Material
Finish Finish
latch latch
steel steel
zinc plated zinc plated
keeper keeper
steel steel
zinc plated zinc plated
latch latch
300 series 300 series stainless steel stainless steel
tumbled tumbled
keeper keeper
304SS 304SS
tumbled tumbled
polybagged polybagged
steel steel
zinc plated zinc plated
2094 2094 209103 209103 2094SS 209455 209103SS 20910355 209402 209402
12.7 .50 [12.7]
---20.6 .81 [20.6]
.20 [5.0] 5.0 .20
•
KEEPER KEEPER
1.14 \
.69 [17 17.4 .4] .69
contains one ►polybagged polybagged part part number number contains one latch latch and and one one keeper keeper per per sealed sealed bag bag .750 19.05 .750[19.05]
.047 [1.19] -1 .047 1.19
36.6 1.44 [36.6]
.09 2.3
6.4 TRAVEL TRAVEL .25 [6.4]
1.53 38.9
1.063 27.00 .003[27.00]
.130 3.30 0.130[3.30] (4) HOLES .938 23.83 .938[23.83]
.54 13.6
55
1.29 32.8
1.50 38.1 1.50[30.1] LATCH LATCH
MOUNTING DIMENSIONS
Small Twist Latches with Tri-shaped Base and Long Slide Part Part Description Material Finish Number Description Material Finish Number
209410 209410
latch latch
steel steel
zinc plated zinc plated
209103 209103
keeper keeper
steel steel
zinc plated zinc plated
209410SS 20941055
latch latch
300 series 300 series stainless steel stainless steel
tumbled tumbled
209103SS 20910355
keeper keeper
304SS 304SS
tumbled tumbled
.047 1.19 .047 [1.19] -t
36.6 1.44 [36.6] 12.7 .50 [12.7]
.81 [20.6] 20.6 .81
.20 5.0 .20[5.0] KEEPER KEEPER
.69 [17.4] 17.4 .69 6.4 TRAVEL TRAVEL .25 [6.4]
2.3 .09 [2.3]
.750 19.05 1.697 43.10 .750[19a .05] 1697[43.10]
.130 3.30 0.130[3.30] (4) HOLES
54.9 2.16 [54.9] .938 23.83 .938[23.83]
13.6 .54 [13.6]
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
1.29 [32.8] 32.8 1.29
38.1 1.50 [38.1] LATCH LATCH
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
153
Latches
SIEP"al PACIFIC ENGINEERING -", PRODUCTS Small Loaded Twist Twist Latches Small Spring Spring Loaded Latches Part Part Number Number .047 1.19
1.44 36.6 1.44[36.6] .50 12.7 12.7 ] .50[
.20 5.0 .2o[s.o]
.81 20.6 -481[20.6]k-
Material Material
Finish Finish
latch latch
steel steel
zinc plated zinc plated
209103 209103
keeper keeper
steel steel
zinc plated zinc plated
209302 209302
polybagged polybagged
steel steel
zinc plated zinc plated
number contains contains one latch and ►polybagged polybagged part part number one latch and one one keeper keeper per per sealed sealed polybag. polybag. thespring springcompensates compensatesfor forup uptoto.156 .156[4.00] [4.00] misalignment I the misalignment
KEEPER KEEPER
.69 17.4 .69[17.4]
Description Description
2093 2093
.25 6.4 .25[6.4] TRAVEL TRAVEL
.09 2.2
1.251[31.78] 1.251 31.78 .130 3.30 0.130[3.30] (4) HOLES
.97 24.6
.938 23.83 .938[23.83]
.57 14.4
1.50 38.1 1.32 33.5
1.93 49.0
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
LATCH
Small Loaded Twist Twist Latches Small Spring Spring Loaded Latches with with Tri-shaped Tri-shaped Base Base Part Part Number Number 1.44 36.6 1.44[36.6]
.0471.19 1.19 ] H-.047[
ED_D
49
.81 20.6 ---.81[20.6]
L .50 12.7 ] .50[1
2.7
.20 5.0 .20[5.0]
Description Description
Material Material
Finish Finish
209303 209303
latch latch
steel steel
zinc plated zinc plated
209103 209103
keeper keeper
steel steel
zinc plated zinc plated
209303BK 209303 B K
latch latch
steel steel
black black e-coat e-coat
209303SS 20930355
latch latch
300 300 series series stainless steel stainless steel
tumbled tumbled
keeper keeper
304SS 304SS
tumbled tumbled
polybagged polybagged
steel steel
zinc plated zinc plated
209103SS 20910355
KEEPER KEEPER
209304 209304 .69 17.4 .69[17.4]
1
.25 6.4 .25[6.4] TRAVEL TRAVEL
number contains contains one latch and ►polybagged polybagged part part number one latch and one one keeper keeper per per sealed sealed polybag polybag thespring springcompensates compensatesfor forup uptoto.156 .156[4.00] [4.00] misalignment I the misalignment
.09 2.2 .09[2.2]
r
1.52 38.6 1.52[38.6]
.750 19.05 .750[19.05]
1.063 27.00 .063[27.00
.130 3.30 0.130[3.30] (4) HOLES
1.50 38.1
.57 14.4 .57[ 14.4]
1.93 49.0
.938 23.83 .938i3.831
1.32 33.5 1.32[33.5] LATCH LATCH MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Small Twist Latches Small Padlocking Padlocking Twist Latches Part Part Number Number 1.44 36.6 1.44[36.6]
e
.047 1.19 1.19 ] .047]
Material Material
Finish Finish
latch latch
steel steel
zinc plated zinc plated
209103 209103
keeper keeper
steel steel
zinc plated zinc plated
latch latch
300 series 300 series stainless steel stainless steel
tumbled tumbled
209103SS 20910355
keeper keeper
304SS 304SS
tumbled tumbled
2091LKSS01* 2091 LK5501*
latch & latch & keeper keeper
300 series 300 series stainless steel stainless steel
tumbled tumbled
.50 12.7 .50[12.7]
2091LKSS-L 2091 LKSS-L
.81 20.6
.20 5.0 .20[ 5.0] KEEPER KEEPER
.69 17.5
Description Description
2091LK 2091 LK
.25 6.4 TRAVEL
.94 23.9
.09 2.3 09[23]
*holes latch andkeeper keeperare are0.193 Ø.193instead insteadof of 0.130 Ø.130 I *holes onon latch and .750[ 19.05] --..--.--1.063[27.00] .750 19.05 1.063 27.00
1.53 38.9 1.53[38.9]
.130 3.30 0.130[3.30] (4) HOLES .938 23.83 .938[3.83]
1.50 38.1 1.50[38.1
1.71 1.71] 43.4 43.4] LATCH LATCH
154 154
Download 3DmoDELs @ @www.spep.com www.spep.com Download
.375 9.53 0.375[9.53] MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industrial Hardware bfrrdWare
Material Material
Finish Finish
209107 209107
steel steel
zinc plated zinc plated
1.44 36.6 1.44[36.6]
209107SS 20910755
304SS 304SS
tumbled tumbled
.94 23.8 .94[23.8]
.047 1.20 ] .047[
mountedperpendicular perpendicular to to latch latch I mounted
Latches
90° Angle Angle Keeper Keeper for for Small Small Twist Twist Latches Latches 90° Part Number Part Number
.71 18.1 .71[18.1] .130 3.30 0.130[3.30] .81 20.6 .81[20.6]
.19 4.9 .19[ 4.9]
Kick-up Shim Shim for for Large Large Twist Twist Latches Latches Kick-up Part Number Part Number
Material Material
Finish Finish
301SS 301SS
passivated passivated
209511SS 20951155
.012 .30 .012[.30]
1.35 34.3 1.35[34.3] .205 5.21 0.205[5.21] (2) HOLES
mountson onlatch latchbase baseto tocreate create aa spring I mounts spring loaded loaded effect on on the the catch catch for effect for aa one one handed handed operation operation
x 1.25 31.8 1.25[31.8]
.15 3.8 .15[3.8]
.75 19.1
.46 11.8 .46[11.8]
FRONT VIEW FRONT VIEW
11 11P
RIGHT SIDE RIGHT SIDE VIEW VIEW
SPRING LOADED KICK-UP SHIM
Cam Type Sash Latch Cam Type Sash Latch Part Number Part Number
2C 2C
Material Material
Finish Finish
steel steel
chrome chrome plated plated
#6F.H.S. F.H.S. screws I #6 screws are areincluded included
2.20 [55.91 55.9 2.20 1.55 39.4 1.55[39.4]
.09 2.2 .09 [2.2] .25 [6.4] 6.4 .25 14.5 .57 [14.5]
1.55 39.4 CENT.
.64 [16.3] 16.3 .64
.2100 [5.334] [5.334] WITH 0.2100 0 .330 .330 [8.38] [8.38] X X 82 82° C'SINK C'SINK TYP.
1.14 29.0 1.10 28.0
.55 [14.0] 14.0 .55 .210 5.33 0.210[5.33] (4) HOLES 1.78 45.1 CENT.
1.78 45.1 1.78[45.1]
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
2.38 [60.5] 60.5 2.38
.90 [22.9]
Cam Type Sash Lock Cam Type Sash Lock Part Number Part Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
2D 2D screws not not included included I screws
.079 [2.00] 2.00 .079
5.00 WITH .197 [5.00] WITH 0.197 .276 [7.00] [7.00] X X 82° 82 C'SINK 0.276 CSINK (2) PLACES
56.0 2.20 [56.0] 1.50 (38.1] 38.1 1.50 CENT.
11 14.5 .57 (14.5]
6.0 .24 24 [6.0] 1.55 39.4
16.2 .64 (16.2] CENT.
1.46 37.0 1.42 36.0
.59 [15.0] 15.0 .99
.197 5.00 0.197[5.00] (4) HOLES
.197 [5.00] 5.00 WITH WITH 0.197 .330 [8.38] [8.38] X 82° 82 C'SINK 0.330 CSINK (2) PLACES
1.42 36.0 MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Request Info
1.78[45.1] 1.78 45.1 CENT. 59.0 2.32 (59.0]
1-800-453-1692 www.aboveboardelectronics.com
.94 24.0
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
155
Latches
SIERRA PACIFIC ENGINEF -q AND PRODUCTS
Small Small EPDM EPDMRubber RubberT-Handle T-HandleLatch Latch frij Part Part Number Number
2.29 [58.2] [58.2] 2.29
.82 [20.9] [20.9] .82
.46 [11.7] [11.7] .46
.039 [1.00] [1.00] 77.039
FRONT VIEW FRONT VIEW .38 [9.7] [9.7] .38
WELD GUIDE
long long
304SS base with ►304SS base and and keeper keeper with passivated finish passivated finish dimensions shown shown are are after after I dimensions installation installation
.23 [5.8] [5.8] .23
.043 [1.10] [1.10] .043
Keeper Keeper Style Style
220-100SS 220-10055
Ø.125 0.125 (3) (3) HOLES HOLES
.70 .70 [17.8] [17.8]
1.42 [36.1] [36.1] 1.42
1.00 [25.4] [25.4] 1.00
.50 [12.7] [12.7] .50
BOTTOM VIEW BOTTOM VIEW
Medium EPDM Rubber Medium EPDM Rubber T-Handle T-Handle Latches Latches Part Part Number Number
Keeper Keeper Style Style
220-200SS 220-20055
long long
220-250SS 220-25055
short short
304SS base with ►304SS base and and keeper keeper with passivated finish passivated finish dimensions shown shown are are after after I dimensions installation installation
2.94 [74.7] [74.7] 2.94
.75 [19.1] [19.1] .75
.34 [8.6] .34 [8.6]
.095 [2.40] [2.40] .095
[2.00] L .079 .079 [2.00]
.50 [12.7] [12.7] -.50
.75 [19.1] [19.1] .75 FRONT VIEW FRONT VIEW
FRONT FRONT VIEW
.50 [12.7]
WELD GUIDE
.95 .95 [24.1] [24.1]
1.88 [47.6] [47.6] 1.88
1.25 [31.8]
1.25 [31.8] [31.8] 1.25
Ø.141 [3.58] [3.58] 0.141 (3) (3) HOLES HOLES
Ø.203 [5.16] [5.16] 0.203 (2) (2) HOLES HOLES
.50 [12.7]
.63 [16.0] 63 [16.0]
BOTTOM VIEW BOTTOM VIEW
BOTTOM VIEW BOTTOM VIEW
LATCH LATCH WITH WITHLONG LONG KEEPER KEEPER
LATCH LATCH WITH WITHSHORT SHORT KEEPER KEEPER
Large Large EPDM EPDMRubber Rubber T-Handle T-Handle Latches Latches Part Part Number Number
Keeper Keeper Style Style
220-300SS 220-30055
long long
220-350SS 220-35055
short short
304SS base with ►304SS base and and keeper keeper with passivated finish passivated finish dimensions shown shown are are after after I dimensions installation installation
4.00 [101.6]
1.25 [31.8] .50 [12.7] .095 [2.41]
.72 [18.3] [18.3] .72
.095 [2.41] [2.41] 1 .095
.095 [2.41]
FRONT VIEW FRONT VIEW
.89 [22.6] [22.6] .89 FRONT VIEW FRONT VIEW .203 [5.16] [5.16] 0.203 (4) HOLES HOLES (4)
Ø.203 [5.16] [5.16] 0.203 (4)HOLES HOLES (4 2.40 [61.0] [61.0] 2.40 1.21 [30.7]
.44 [11.2] [11.2] .44
1.50 [38.1] [38.1] 1.50
156 156
Download 3DmoDEts @ www.spep.com Download @ www.spep.com
.88 [22.4] .88 [22.4]
.44 [11.2] [11.2] .44
2.88 [73.2] [73.2] 2.88
BOTTOM VIEW BOTTOM VIEW
BOTTOM VIEW BOTTOM VIEW
LATCH WITH WITHLONG LONG KEEPER KEEPER LATCH
LATCH LATCH WITH WITHSHORT SHORT KEEPER KEEPER
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Inch Industrial Hinges and •ctrial Hardware Hf-rdware
Keeper Style Keeper Style
220-400SS 220-40055
long long
220-450SS 220-45055
short short
304SS base ►304SS baseand andkeeper keeperwith with passivated passivated finish finish dimensionsshown shown are are after I dimensions after installation installation I long longkeeper keeperincludes includes(2) (2) small small weld guides guides weld
Latches
Extra Large Latches Extra Large EPDM EPDM Rubber Rubber T-Handle T-Handle Latches Part Number Part Number
5.13 [130.3]
1.25 [31.8] .57 [14.5] .095 [2.41]
.095 [2.41] [2.41] .095
.126 [3.20]
.99 [25.2]
1 -_.
FRONT VIEW VIEW FROM'
.203 [5.16] [5.16] 0.203 (4) (4) HOLES HOLES
.203 [5.16] [5.16] 0.203 (4) HOLES (4) HOLES
.375 [9.53] [9.53] 0.375 PILOT HOLE PILOT HOLE
.69 [17.6] .69 [17.6]
1 3.08 [78.2] [78.2] 3.08
1.27 [32.3] 1.27 [32.3] FRONT VIEW FRONT VIEW
1
1.45 [36.8] 1.45 [36.8]
.50 [12.7] .50 [12.7]
2.00 [50.8] [50.8] 2.00
.50 [12.7] .50 [12.7]
1.00 1.00 [25.4] [25.4]
3.56 [90.4] [90.4] 3.56
BOTTOM VIEW BOTTOM VIEW
BOTTOM VIEW BOTTOM VIEW
LATCH WITH LATCH WITH LONG LONG KEEPER KEEPER
LATCH WITH WITH SHORT LATCH SHORT KEEPER KEEPER
ExtraLarge LargeEPDM EPDMRubber Rubber T-Handle T-Handle Latches Latches 1:13 Extra Part Number Part Number
Keeper Style Keeper Style
220-500SS 220-50055
long long
220-550SS 220-55055
short short
304SS base ►304SS baseand andkeeper keeperwith with passivated passivated finish finish dimensionsshown shown are are after I dimensions after installation installation
9.75 [247.7]
.57 [14.5]
1.25 [31.8]
.095 [2.41]
.126 [3.20]
1.02 [25.9]
.095 [2.41] [2.41] .095 1.27[32.3] [32.3] x-1.27 FRONT VIEW FR 1,/"VIBV
FRONT VIEW FRONT VIEW
Ø.203 [5.16] [5.16] 0.203 (4) HOLES (4) HOLES
Ø.203 [5.16] [5.16] 0.203 (4) HOLES (4) HOLES
Ø.375 [9.53] [9.53] 0.375 PILOT PILOT HOLE HOLE .64 [16.3] .64 [16.3]
3.12 [79.3] 3.12 9.3] .50 [12.7] 50 [12.7]
ED
1.52 1.52 [38.6] [38.6]
.50 [12.7] 50 [12 7]
J
11
6.50 [165.1] [165.1] 6.50
Request Info
1.00 [25.4] 1.00 [25.4]
8.06 [204.7] [204.7] 8.06
BOTTOM VIEW BOTTOM VIEW
BOTTOM VIEW BOTTOM VIEW
LATCH WITH LATCH WITH LONG LONG KEEPER KEEPER
LATCH WITH LATCH WITH SHORT SHORT KEEPER KEEPER
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
157 157
Latches
SIEP"1 PACIFIC
ENGINEERING AND PRODUCTS
Small Small Thermoplastic ThermoplasticDraw DrawLatches Latches CO Part Part Number Number
.60 15.3 .60[153]
A.1-1 1
.38 [9.6] 9.5 .38 1.25 [31.8] 31.8 1.25
17.5 .69 [17.5] .69
concealed concealed
225-150SS 225-15055
reversed reversed
225-200SS 225-20055
right right angle angle
225-350SS 225-35055
padlocking padlocking
metalcomponents componentsare are304SS 304SS with with I metal passivated finish passivated finish dimensionsshown shownare are after after installation installation I dimensions
A
.80 20.3 80[20.3]
1.30 33.0 1.30[33.0] BOTTOM VIEW BOTTOM VIEW
1.*
Keeper Keeper Style Style
225-100SS 225-10055
SECTION A-A A-A SECTION
CONCEALED KEEPER KEEPER CONCEALED
.50 12.7
S;iIP right right angle angle
concealed concealed
.46 11.7
.09 2.4 )2. KEEPER KEEPER
.50 12.7 .50[12.7]
reversed reversed
TOP VIEW
B
.22 5.6 .22[6.6]
C
.350 8.89 95350[8.89]
D
3.11 [79.0] 79.0 3.11
.28 7.1
2.82 71.6 .06 1.4 .06[1.4] BRACKET BRACKET
.45 11.5
1.30 33.0
.173 4.39 0.173[4.39] TYP. TIP.
padlocking padlocking
D 0
C
B
BOTTOM VIEW BOTTOM VIEW
BOTTOM VIEW BO TTOM VIEW
SECTION B-B SECTION B-B
REVERSED KEEPER REVERSED KEEPER
SECTION C-C C-C SECTION
BOTTOM VIEW VIEW BOTTOM
RIGHT ANGLE RIGHT ANGLE KEEPER KEEPER
SECTION D-D SECTION 0-0
PADLOCKING PADLOCKING KEEPER KEEPER
Large Large Thermoplastic Thermoplastic Draw Draw Latches Latches A A 45.7 1.80 [457]
Part Part Number Number
A A
tr
225-300SS 225-30055
concealed concealed
225-400SS 4figg 225-40055
padlocking padlocking
_ 1.50 1.50 38.1 [1]
o
1
6.49 164.7 LATCHED LATCHED 6.49[164.7] 5.95 [151.1] UNLATCHED
metalcomponents componentsare are304SS 304SS with with I metal passivated finish passivated finish dimensionsshown shownare are after after installation installation I dimensions
TOP VIEW TOP VIEW .061 1.55 _ .061[1.55] BRACKET
concealed concealed
.394 10.00
.094 2.40 _494[2.40] KEEPER
1.17 29.7
padlocking padlocking
Keeper Keeper Style Style
.75 19.1 .75[19.1]
.50 12.7 .50[12.7]
3.00 76.2 k-3.00 [76.2
12.7 .50 [12.7]
12.7 .50 [12.7]
11.7 .46[11.7] I-•-.46
3.50 [88.9] [88.9] 3.50
SECTION A-A SECTION A-A WITH PADLOCKING WITH PADLOCKING KEEPER KEEPER
SECTION A-A A-A SECTION
.31 8.0 .31[8.0]
SMALL LATCH
LARGE LATCH
: et .204 5.18 0.204[5.18]
f
.49 12.5
BOTTOM VIEW BOTTOM VIEW
Plastic Plastic Draw Draw Latches Latches
C'SUNK .204 FOR5.18 .170[4.32] 4.32 0304[5.18] E0.170 A # 3 F.H.S. BOTTOM BOTTOM VIEW VIEW (4) PLACES .26 6.5
.204 5.18 0204[5.18]
1.17 29.8
.68 17.2
Number Material Finish Part Number Size Size Material Finish LARGEPart LATCH .50 12.7 smooth, C'SUNK FOR smooth, small plastic TOP VIEW 223BK-01 A # 4 small plastic F.H.S. .85 21.5223BK-01 black black (4) PLACES
SMALL LATCH SMALL LATCH
SMALL LATCH
223BK-01 223BK-01
.68 17.2 .68[17.2]
1.69 43.0 LATCH LARGE LARGE LATCH .50 12.7
SMALL LATCH TOP VIEW
.49 12.5
.85 21.5 1.69 43.0 .508 12.90
.26 6.5 1.17 29.8 1.17[29.8]
223BK ,223I3K TOP VIEW
1.69 43.0
158 158
.26 6.5
TOP VIEW TOPVIEW
.68 17.2
.50 12.7
TOP VIEW
.50 12.7 60[12.7] 1.17 29.8
.24 6.0
.85 21.5
large plastic large plastic .39 9.9
2.14 54.3 smooth, smooth,
black black
►living living hinge hinge draw draw latch latch .732 18.6 .66 16.7 low profile profile I low TOP VIEW CROSS SECTION .39 is 9.9 keeper is concealed concealed when whenLATCHED latched I keeper latched MOUNTING DETAILS
.508 12.90 .508[12.90] LATCHED LATCHED CROSS CROSS SECTION SECTION MOUNTING DETAILS MOUNTING DETAILS
2.14 54.3
C'SUNK C'SUNK FOR FOR A# #4 4 F.H.S. F.H.S. A (4) PLACES (4) PLACES
.66 16.7 .30 7.7
TOP VIEW
2.14 54.3 .732 18.6
.24 6.0
LATCHED CROSS SECTION .30 7.7 MOUNTING30[7.7] DETAILS
.39 9.9 .39[9.9]
.508 12.90
Download 31)moDELs @ @www.spep.com www.spep.com Download
223BK 223BK
C'SUNK FOR A # 4 F.H.S. (4) PLACES
.24 6.0
LATCHED CROSS SECTION MOUNTING DETAILS
LATCHED CROSS SECTION MOUNTING DETAILS
1.69 43.0LARGE LATCH .24 6.0 h— 1.69[43.0] .24[6.0]
.26 6.5 .26[6.5]
1.17 29.8
C'SUNK FOR A # 3 F.H.S. (4) PLACES
.49 12.5
C'SUNK FOR A # 3 F.H.S. (4) PLACES
C'SUNK FOR C'SUNK FOR A# #3 3 F.H.S. F.H.S. A (4) PLACES PLACES (4)
.49 12.55] .49[12
C'SUNK F A # 4 F.H (4) PLACE
.85 21.5
.66 16.7 .66[16.7]
.732 18.6 .732[18.6] LATCHED LATCHED CROSS CROSS SECTION SECTION MOUNTING DETAILS MOUNTING DETAILS
TOP VIEW TOP111EVi
2.14 54.3
Request Info
.30 7.7
1-800-453-1692 www.aboveboardelectronics.com
.30 7
n-nes and Hinges Hardware and Industrial Industrial bfrrdWare
164HZ 164HZ
Material Material
Finish Finish
steel steel
zinc zinc plated plated
.047 [1.19] .047 [1.19]
.236 6.00 HOLE HOLE WITH WITH 0.236[6.00]
.71 18.0 CENT.
.51 13.0 57[73.0]
.299 [7.60] [7.60] xx 82° 82 C'SINK C'SINK 0.299 (6) PLACES PLACES (6)
1.46 37.0 TYP.
1.00 25.4 1.00[25.4] TYP. TYP.
.31 8.0 0 .3118.0]
1.39 35.3
.50 12.7 .50[12.7]
.60 15.3 .60[15.3]
-4
Latches
Mini Barrel Barrel Bolt Bolt Latches Latches Mini Part Material Material Part Number Thickness Number Thickness
.30 7.6 •-.30[7.6]
Small Latch Small Standard Standard Latch Part Material Material Part Material Finish Number Thickness Material Finish Number Thickness
165HZ 165HZ
.047 [1.19] .047 [1.19]
zinc zinc plated plated
steel steel
.236 6.00 HOLE HOLE WITH WITH 0.236[6.00] .311 [7.90] [7.90] xx82° 82 C'SINK C'SINK 0.311 (6) PLACES PLACES (6)
1.50 38.1 1.50[38.1] CENT. CENT.
1.50 38.1 1.55[30.1] TYP. TYP.
1.00 25.4 1.00[25.4] TYP. TYP.
.31 8.0 0.31 8.0] -
2.14 54.3 2.14[54.3]
.52 13.2
.75 19.1 .75[19.1]
.59 15.0 .59[15.0]
.30 7.6
Large Standard Latch Large Standard Latch Part Material Material Part Number Thickness Number Thickness
167HZ 167HZ
Material Material
Finish Finish
steel steel
zinc zinc plated plated
.047 [1.19] .047 [1.19]
1.69 42.8 1.69[42.8]
1.69 42.8 1.69[42.8]
.236 6.00 HOLE HOLE WITH WITH 0.236[6.00] .311 [7.90] [7.90] xx 82 0.311 82° C'SINK CSINK (8) PLACES PLACES (8)
1.40 35.6 1.40[35.6] TYP. TYP.
1.00 25.4 TYP.
.31 8.0] 8.0 0.31
4.00 101.6 4.00[101.6]
.50 12.7 -.-.50[12.7]
1
.95 24.2 15[24.2]
.59 15.0
.30 7.6 30[7.6]
Heavy Latch Heavy Duty Duty Latch Part Material Material Part Number Thickness Number Thickness
169HZ 169HZ
Material Material
Finish Finish
steel steel
zinc zinc plated plated
.071 [1.80] .071 [1.80]
2.38 60.3 2.38[60.3]
.268 6.80 HOLE HOLE WITH WITH 0.268[6.80] .312 [7.92] [7.92] xx82° 82 C.SINK C'SINK 0.312 (4) PLACES PLACES (4)
1.62 41.2 1.62[41.2] TYP. TYP.
.64 16.3 64[16.3]
1.10 28.0 1.10[28.0] TYP. TYP.
.39 10.0 0.39[10.0]
3.02 76.8 3.02[76.8]
.85 21.6 .85[21.6]
.67 17.0 .67[17.0]
.276 7.00 HOLE HOLE WITH WITH 0.276[7.00]
.40 10.2 .40[10.2]
.330 [8.38] [8.38] xx82° 82 C.SINK C'SINK 0.330 (2) PLACES
Heavy Duty Padlocking Padlocking Barrel Barrel Bolt Bolt Latches Latches Heavy Duty Part Number Part Number
Material Material
Finish Finish
163-L 163-L
steel steel
zinc plated zinc plated
163-K 163-K
steel steel
zinc plated zinc plated
latchand andkeeper keeperare are sold sold separately separately I latch 163-L HOLE FOR FOR A HOLE A 3/8" PADLOCK PADLOCK 3/8" 3.05 77.5 3.05[77.5] CENT. CENT.
SQ. .275 6.99 SO. .275[6.99] (8) PLACES PLACES (8)
.93 23.5 .93[23.5]
163-K
.091 2.3 091[2.3]
0 0 2.83 71.8 2.83[71.8] TYP. TYP.
.95 24.0 .95[24.0]
1.98 50.3 1.98[50.3] TYP. TYP.
.625 15.9 0.625[15.9]
El El 4.50 114.3 4.50[114.3]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.81 46.0 1.81[46.0
1.50 38.1 1 50[38 1]
.53 13.4 .53[13.4]
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
159
Latches
SIERRA PACIFIC ENGINE,---,3 AND PRODUCTS
Spring Spring Loaded Loaded Bolt Bolt Latch Latch
CD
Material Material
Finish Finish
168SS-L 16855-L
Part Part Number Number
304SS 304SS
passivated passivated
168SS-K 16855-K
304SS 304SS
passivated passivated
latchand andkeeper keeperare are sold sold separately separately I latch 168SS-L 16855-L 3.56 90.5 3.56 [90.5]
.96 [24.5] 24.5 .96
2.56 [65.1] 65.1 2.56
168SS-K
room mr-Ammo to
BOLT WILL WILL FULLY FULLY BOLT RETRACT
.78 19.7
,
1.32 [33.5] 33.5 1.32
.80 20.3 TYP.
.354 [9.00] 9.00 0.354 PIN PIN
.181 4.60 HOLE HOLE WITH WITH 0.181[4.60]
.83 21.0
.56 14.2
.315[8.00] [8.00]xx82 82° C'SINK C'SINK 0.315 (6) PLACES PLACES (6)
Spring Spring Loaded Loaded Bolt Bolt Latch Latch Part Part Number Number
2022CH 2022CH
Material Material
Finish Finish
die cast zinc die cast zinc
chrome chrome plated plated
springloaded loaded pin I spring pin 48.5 1.91 [48.5]
-0
17.0 .67 [17.0]
-
O
0
.93 [23.5] 23.5 .93 CENT.
Ci) 0 .165 4.20 HOLE HOLE WITH WITH X0.165[4.20]
.6
.87 [22.0] 22.0 1.2011 .87 1.20 30.6 0.6] LI CENT. t .39 [10.0] 10.0 .39
.224 [6.20] C'SINK 0 .224 [6.20] xx 90 90° C'SINK (6) PLACES PLACES (6)
.33 [8.5] 8.5 0.33
.30 [7.5] 7.5 .30 3.29 [83.5] 83.5 3.29
Right and and Left Left Hand Hand Spring Spring Loaded Loaded Bolt Bolt Latch Latch Right Part Part Number Number
1128LH 1128LH
Housing Housing
Bolt & Components Bolt &Components
Material Material
Finish Finish
Material Material
Finish Finish
die cast die cast zinc zinc
nickel nickel plated plated
304SS 304SS
passivated passivated
boltend endisisflush flushto tohousing housingsurface surface when I bolt when fully fully retracted retracted
.87 22.0 .87[22.0] 10.0 .39 [10.0]
)
Stop pin can be Stop pin can be removed removed and and reinstalled for reinstalled for left left or or right right hand hand operation. operation.
.205 [5.20] [5.20] .264 [6.70] [6.70] x:.205 (2) OBROUNDS
L•
I-
.24 [6.0] 6.0 0.24
Download Download 3Dmour @@www.spep.com www.spep.com
18.0 .71 [18.0]
60.0 2.36 [60.0] .63 [16.0] 16.0 x.63
160 160
I '111 1=16 80.0 3.15 [80.0]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industrial Hardware Hardware
1133 1133
ID
Material Material
Finish Finish
steel steel
zinc plated zinc plated
1.02 26.0 1.02 [26.0]
Spring Latch Spring Loaded Loaded U-Bolt U-Bolt Latch
Latches
Part No. Part No.
DI
ffp n
1.57 40.0 .57 [40.0] .79 [20.0] 20.0 .79 CENT.
1.18 30.0 1.18 [30.0]
.2362 [6.000] 6.000 0.2362
.65 [16.5] 16.5 .65
.0787 [2.000] 2.000 THK.
.59 [15.0] 15.0 .59
5.20 .205 [5.20] 0.205 (2) PLCS.
16.0 .63 [16.0]
FRONT VIEW VIEW FRONT
RIGHT SIDE SIDE VIEW RIGHT VIEW
Loop Handle Latch Loop Handle Latch Part Number Part Number
1445 1445
Guide Material Guide Material Thickness Thickness
Finish Finish
.118 [3.00] .118 [3.00]
zinc plated zinc plated
steelhandle handleand and keeper keeper I steel diecast castzinc zinc base base I die
61.4 2.42 [61.4]
1.38 34.9 .97 .97 [24.6] 24.6 1.38 [34.9]
19.1 ill .75.75 [19.1]
P
=1= . = 1,
.203 [5.16] 5.16 HOLE HOLE WITH WITH 0.203 .365xx .063 .063 DEEP DEEP C'BORE 0.365 (4) PLACES PLACES (4)
Elmo? 1.44 36.5 1.44 [36.5]
1 in
1.47 [37.3] 37.3 1.94 1.94 [49.2] 49.2 1.47
5.16 .203 [5.16] 0.203 (2) HOLES HOLES (2)
TOP VIEW VIEW TOP 4.63 [117.5] 117.5 4.63
57.2 2.25 [57.2] .81 [20.6] 20.6 .81
.38 [9.5] 9.5 0 .38 FRONT VIEW FRONT VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
161 161
Latches
SPrgeRil PACR"C ENGINE,- AND PRODUCTS
Bolt Latches Latches with Bolt with Stop Stop Pin Pin Part Part Description Material Material Number Description Number
1.54 39.1 1.54[39.1]
right hand
000 441=11111111•1111111 1.111
1182SS 118255
right hand right hand
304SS 304SS
electropolished electropolished
1182ZN 1182ZN
right hand right hand
steel steel
zinc plated zinc plated
1183SS 118355
left hand left hand
304SS 304SS
electropolished electropolished
1183ZN 1183ZN
left hand left hand
steel steel
zinc plated zinc plated
Ø.438[11.13] [11.13] bolt I 0.438 bolt blackPVC PVC rubber I black rubber grip grip
0 1.50 38.1 1.50[38.1
ol c
1.25 31.8 2.00[50.8 2.00 50.8 ] 1.25[31.8]
Finish Finish
.266 6.75 0.266[6.75] (4) HOLES
3.38 85.9 1.98 50.3 —3.38[85.9]1.98[50.3] jam.
.30 7.6 .30[7.6]H
I
Itiqlptt
.65 16.6 ] .65[
1.32 33.6 1.32[33.6]
left hand hand left
RETRACTED BOLT RETRACTED BOLT
EXTENDED BOLT EXTENDED BOLT
Bolt Latch Latch with Stop Pin Bolt with Stop Pin Part Number Part Number
1182SS-01 118255-01
O 0 0 1.25 31.8 2.00 50.8 1.25[ 31.8] 2.00[50.8]
1.50 38.11] 1.50[38
O0
Material Material
Finish Finish
304SS 304SS
electropolished electropolished
Ø.438[11.13] [11.13] bolt I 0.438 bolt I black blackPVC PVC rubber rubber grip grip bidirectional I bidirectional
.266 6.75 0.266[6.75] (4) HOLES
3.38 85.9] 85.9 -..-3.38[
1.98 50.3 1.98[50.3]
.30 7.6 .30[
1.52 38.5 1.52[38.5] 1.32 33.6
.64[1116.3] .64 16.3 1.32[s33.6]
-.7
RETRACTED BOLT BOLT RETRACTED
EXTENDED BOLT EXTENDED BOLT
Bolt Latch Stop Pin Bolt Latch with with Stop Pin Part Number Part Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
1142ZN 1142ZN
01=111111U111l
1.25 31.8 2.00[50.8] 2.00 50.8 1.25[31.8]
Ø.438[11.13] [11.13] bolt I 0.438 bolt blackPVC PVC rubber I black rubber grip grip bidirectional I bidirectional
O
1.50 38.1 1.50[
.265 6.73 .7 3] 45 .265[6
(4) HOLES
3.38 85.9 3.38[85.9]
.60 15.2 .60[15.2]
2.30 58.4
1.53 38.8 1.53[38.8]
ft11=1:1 :11111111111: 2.13 54.0 2.13[54.0]
EXTRACTED BOLT EXTRACTED BOLT
162
Download www.spep.com Download3DmoDELs @ @ www.spep.com
2.82 71.7 ] 2.82[
EXTENDED EXTENDED BOLT BOLT
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial HardiA.-re Hardware Hinge
Material
Finish
steel steel
zinc plated zinc plated
1184ZN 1184ZN Ø.313[7.95] [7.95] bolt I 0313 bolt
20 1.25 [31.8]
O 1.25[31.8] [31.8] 4_ 125
1.63 [413] [41.3] 153
2.00 [50.8]
Latches
Bolt Latch Latch with Stop Pin Bolt with Stop Pin Part Number
I 2.00 [50.8] 2.00 [soil]
0 Ø.266 [6.75] 0266 p.m
1.50 [38.1] [38.1] 130
8.50 [215.9]
1.62 [41.1] 1.62[41.1]
1.32 [33.6]
[85.9] - 3.383.38 [85.9
i
1//1/1///11/1
.64 [16.4]
r
RETRACTED BOLT
3.31 [84.1] [84.1] 331
1.62 [41.1]
1.32 [335] [33.6] 132
itiv*
.64 [16.4] RETRACTED BOLT
EXTENDED BOLT
Bolt Latch Bolt Latch with with Keeper Keeper Part Number
Material
Finish
steel steel
zinc plated zinc plated
1260ZN
9.1
.75 19.1 0.75[19.1] 1.50 38.1 1.50[38.1]
1.50 38.1 Ø.750[19.05] [19.05] steel steel.268 bolt I 0.750 bolt 6.80 (6) HOLES .94 23.9
3.88 98.4 3.88[98.4]
,.. 1.25[3 ,,,.,,. .94 23.9 .94[23.9]
,,. .„„,:..
2.13 54.0
1.25 31.8
.268 6.80 0.268[6.80] (6) HOLES HOLES (6)
2.13 54.0 1.25 31.8 1.8] 2.13[54.0]
5.90 149.9 5.90[149.9]
149.9
2.14 54.4 2.14[54.4] 1.25 31.7 1.25[31.7]
.22 81.7
.236 6.00
11 i hum mum= Iliali[1000Ji01 IL
maw§ 3.22 81.7 3.22[81.7]
1.33 33.7 1.33[33.7
.236 6.00 .236[6.00]
1.33 33.7 RETRACTED BOLT
EXTENDED BOLT EXTENDED BOLT
RETRACTED BOLT RETRACTED BOLT
ENDED BOLT
1.25 31.7
Aluminum Bolt Latch with Stop Pin Part Number
1181A
Material
Finish
aluminum aluminum
mill mill
3.25 82.6
Ø.438[11.13] [11.13]304SS 304SS bolt I 0.438 bolt 1 .438 11.11
.438 11.11 1.50 38.1 11.11] 1.50[38.1] 0.438
1.50 38.1
6.51 165.4
6.51 165.4 .25 6.3
1.57 40.0
1.00 25.4
.189 4.80 .189[4.80]
.25 6.3
1.57 40.0 1.57[40.0]
1.50 38.1 , 1.50[38.1] 1.00 25.4 1.00 264]
1.50 38.1
RETRACTED BOLT RETRACTED BOLT
NDED BOLT
RETRACTED BOLT
EXTENDED BOLT EXTENDED BOLT
Aluminum Bolt Bolt Latch Latch with Hook Pull Pull and and Stop Stop Pin Aluminum with Hook Pin Part Number 1181A-01
Material
Finish
aluminum aluminum
mill mill
Ø.438[11.13] [11.13]304SS 304SS bolt I 0.438 bolt .438 11.11
C
1.50 38.1
7.20 183.0 7.20[183.0]
1.57 40.0
3.25 82.6
In n nil:flow
.189 4.80 .189[4.80]—.-
.438 11.11 11.11] 1 — 0.438[
1.50 38.1 1.50[38.1]
1.57 40.0 1.57[40.0]
.25 6.4 .25[6.4]—H
1.00 25.4
1.50 38.1
.25 6.4
1=== ,i1,100101II =..111111141:11111111, RETRACTED BOLT RETRACTED BOLT
ENDED BOLT Request Info
1-800-453-1692 www.aboveboardelectronics.com
7.20 183.0
il
1.50 38.1 1.00 25.4 1.50[38:1] 1.00[25.4]
EXTENDED BOLT EXTENDED BOLT
RETRACTED BOLT
To Place 800.433.5554 1111
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
163
Latches
algEP"al PACIFIC EA-
Aluminum Aluminum Bolt Bolt Latches Latches with with Hook Hook Pull Pull and and Stop Stop Pin Pin Part Number Part Number
.197 [5.00] 5.00 0.197 (2) (2) HOLES HOLES
.96 24.4 .96[24.4]
.25 6.4 .25[6.4]
co
.98 [25.0] 25.0 .98
Description Description
Material Material
Finish Finish
1181A-11RH 1181A-11 RH
right hand right hand
aluminum aluminum
mill mill
1181A-11LH 1181A-11LH
left hand left hand
aluminum aluminum
mill mill
Ø.315[8.00] [8.00]304SS 304SS bolt bolt I 0315 56.0 2.20 [56.0] 2.20
left hand hand left
.315 [8.00] 8.00 0.315
40.5 1.60 [40.5]
4.88 [124.0] 124.0 4.88 1.06 [27.0] 27.0 1.06
1.31 [33.3] 33.3 1.31
Lemur linimunt= •
.73 [18.6] 18.6 .73
,„„„„„N,,„,„„„„,‘„,i.
right hand hand right
.19 [4.7] 4.7 .19
.106 2.70 .106[2.70]
EXTENDED EXTENDED BOLT BOLT
RETRACTED RETRACTED BOLT BOLT
Aluminum Bolt Bolt Latch Latch Aluminum Part Number Part Number
Material Material
Finish Finish
aluminum aluminum
mill mill
3.25 82.6
1181A-02 1181A-02
3.25 82.6
Ø.438[11.13] [11.13]304SS 304SS bolt I 0.438 bolt .438 11.11
1.50 38.1
.438 11.11 11.11 ] 1.50[38.1 1.50 38.1 ] 0 .438
.189 4.80 .189[4.80]
1.57 40.0 1.57[40.0]
5.97 151.7 5.97[151.7]
.189 4.80
1.57 40.0
5.97 151.7
1111't tli1111111t :
.25 6.4
1.50 38.1 4] 1.50[38.1] 1.00 25.4 0[25. 1.0
EXTENDED EXTENDED BOLT BOLT
1.00 25.4
1.50 38.1 RETRACTED RETRACTED BOLT BOLT
EXTENDED BOLT
Aluminum Bolt Bolt Latch Latch Aluminum
RETRACTED BOLT
Part Number Part Number
3.25 82.6
3.81 96.8
1181A-03 1181A-03
Material Material
Finish Finish
aluminum aluminum
mill mill
Ø.438[11.13] [11.13]304SS 304SS bolt I 0.438 bolt
3.25 82.6
3.81 96.8 3.81[96.8]
.25 6.4 .25[ 6.4 ]-.-1
.438 11.11
1.50 38.1
1.50 38.1 .438 11.11] 11.11 1.50[38.1] 0.438
.189 4.80 -••-• .189[4.80]
6.63 168.3
1.56 39.7 1.56[39.7]
.24 6.0 1.51 38.4] 38.4 1.56 39.7 1.01 25.7 1.01[25.7151 [
.189 4.80
6.63 168.3 .24 6.0 RETRACTED RETRACTED BOLT BOLT
EXTENDED EXTENDED BOLT BOLT 1.51 38.4 1.01 25.7
Spring Loaded Bolt Bolt Latches Latches Spring Loaded
RETRACTED BOLT
EXTENDED BOLT
Part Number Part Number
3.94 100.0 3.94[100.0] .114 3.00 .114[3.00]
1.25 31.7 1.25[31.7] 1.12 28.4 1.12[28.4]
1185SS-RH
1185SS-LH 118555-LH
1.19 30.1 1.19[30.1] .38 9.5 .38[9.5]
.265 r 6.73 0.265[6.73 (2) (2) HOLES HOLES
Description Description
Installation Installation
1185SS-RH 118555-RH
without stop stop pin without pin
right right hand hand
1185SS-LH 118555-LH
without stop stop pin without pin
left hand left hand
1185SS-RH01 118555-RHO1
with stop pin with stop pin
right right hand hand
1185SS-LH01 118555-LHO1
with stop pin with stop pin
left hand left hand
material:304SS 304SS I material: finish: tumbled I finish:tumbled
1.13 28.6 .13[28.6]
.66 16.7 .66[16.7] .375 9.53 0.375[9.53] 2.00 50.8 2.00[50.8]
1185SS-RH01 118555-RHO'
164 164
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
1185SS-LH01 118555-LHO1
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Description Material Material Description
Finish Finish
1178SS-RH01 117855-RH01
right right hand hand
304SS 304SS
tumbled tumbled
1178SS-LH01 117855-LH01
left left hand hand
304SS 304SS
tumbled tumbled
5.75 146.1 5.75[146.1]
II
~~66dumiul~~lu~llluiid m, 1.75 44.5 1.75[44.5]
1.63 41.3 1.63[41.3]
1.25 31.8 1.25[31.8]
•
.279 7.09 0.279[7.09] (2) HOLES (2) HOLES
TOP VIEW TOP VIEW
right hand hand right
3.00 76.2 3.00[76.2]
1.49 38.0 1.49[38.0]
II
li,'''11111,14f1,11111].
.500 12.70 0.500[12.70]
Latches
Spring Bolt Latches Latches with Spring Loaded Loaded Bolt with Stop Stop Pin Pin Part Part Number Number
.75 19.1 .75[19.1]
EXTENDED BOLT EXTENDED BOLT .34 8.7
.181 4.60 .181[4.60]
II
left hand hand left
.75 19.1] .75[19.1 RETRACTED BOLT BOLT RETRACTED
Spring Loaded Pull Pull Action Action .44" .44" Pin Pin Latch Spring Loaded Latch Part Part Number Number
Material Material aluminum body, body, 304SS 304SS pin aluminum pin and plastic plastic knob and knob
1187-01 1187-01
1.00 25.4
1.47 37.2
.44 11.2
.875 22.23 .875[22.23]
.375 9.53
3/4-16 THD.
1.00 25.4
Spring Loaded Pull Pull Action Action Pin Pin Latch Spring Loaded Latch Part Part Number Number
Dim. AA Dim Dim B Dim. C C Dim. B Dim.
1187 1187
.48 .48 [12.2] [12.2]
1.47 1.47 [37.3] [37.3]
1.00 1.00 [25.4] [25.4]
1188 1188
.97 .97 [24.6] [24.6]
1.47 1.47 [37.3] [37.3]
1.00 1.00 [25.4] [25.4]
1189 1189
.72 .72 [18.3] [183]
1.71 1.71 [43.4] [43.4]
1.25 1.25 [31.8] [31.8]
Material Material B
A
aluminum aluminum body, body, 304SS 304SS pin pin and and ring ring
.875 22.23 .875[22.23]
.375 9.53
C
.98 [24.8]
3/4-16 THD.
Bolt Latch Latch with Pull Ring Bolt with Pull Ring Part Part Number Number
Dim A A Dim
Dim B Dim B
Dim C C Dim
Dim D Dim D
1159 1159
3.15 3.15 [80.0] [80.0]
1.40 1.40 [35.5] [35.5]
5.13 5.13 [130.2] [130.2]
.12 .12 [3.0] [3.0]
1159-03 1159-03
2.00 2.00 [50.8] [50.8]
.85 .85 [21.5] [21.5]
3.41 3.41 [86.5] [86.5]
.20 .20 [5.0] [5.0]
affifififililatlilial =
iiS
1p11111111111101111Jfill
1.57 [40.0] 40.0 1.57
.157 4.00 THK. THK. .157 [4.00] TOP VIEW VIEW TOP
steelwith withzinc zinc plated plated finish finish I steel Ø.600[15.24] [15.24]steel steel bolt bolt I 0.600
A
B
part no.1159 part no.1159 unlatched unlatched
part no.1159-03 part no.1159-03 unlatched unlatched
.60 [15.2] 15.2 0.60
FRONT VIEW FRONT VIEW LATCHED LATCHED C D D 1.26 32.0 1 26[32 0]
part no.1159 part no.1159 latched latched
part no.1159-03 part no.1159-03 latched latched
FRONT VIEW FRONT VIEW UNLATCHED UNLATCHED
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
165 165
Latches
SIERRA PACIFIC ENGINEERING AND PROD"" --1500 SeriesEconomy EconomyTwo Two Point PointCam Cam Action Action Bar Bar Locks Locks 1500 Series
Standard Base Base Keeper Keeper Kits Kits Standard part shipped in in bulk bulk part number number1500-111B 1500-1116 shipped part in polybag part number number 1500-111P 1500-111P shipped shipped in polybag Component Component Part Part No. No.
Description Description
Finish Finish
Qty. Qty.
11
1500A 1500A
top keeper keeper top
zinc plated zinc plated
11
2 2
1500B 1500B
bottom bottom keeper keeper
zinc plated zinc plated
11
Item Item
lug lug keeper keeper options options
1
3 3
1500C 1500C
top lug lug top
zinc plated zinc plated
11
4 4
1500D 1500D
bottom lug bottom lug
zinc plated zinc plated
11
5 5
1500E 1500E
handle zinc plated plated handlewithout withoutgrip grip zinc
11
6 6
1500F 1500F
PVC PVChandle handle grip grip
black black
3
standard standard 3/4 [19] [19] dia. 3/4 dia. pipe pipe not not included included
11
77
1500G 1500G
hasp hasp keeper keeper
zinc plated zinc plated
11
8 8
1500H 1500H
top pipe pipe holder holder top
zinc plated zinc plated
4 4
9 9
1500I 15001
bottom zincplated plated bottompipe pipeholder holder zinc
4 4
handle & keeper handle & keeper options options
componentsmay may be be purchased purchased separately separately I components
7
r
6
1500-111B
standard base keeper standard base keeper
1500-111P 1500-211B 1500-211P 5
Solid Base Base Keeper Keeper Kits Kits Solid
handle & keeper handle & keeper options options
part shipped in in bulk bulk part number number 1500-211B 1500-2116 shipped part in polybag part number number 1500-211P 1500-211P shipped shipped in polybag Item Item
Component Component Part Part No. No.
Description Description
Finish Finish
Qty. Qty.
11
1500A-01 1500A-01
top keeper top keeper ●•
zinc plated zinc plated
11
2 2
1500B-01 1500B-01
bottom bottom keeper keeper ●•
zinc plated zinc plated
11
3 3
1500C 1500C
top lug lug top
zinc plated zinc plated
11
4 4
1500D 1500D
bottom lug bottom lug
zinc plated zinc plated
11
handle zinc plated plated handlewithout withoutgrip grip zinc
11
5 5
1500E 1500E
6 6
1500F 1500F
PVC PVChandle handle grip grip
black black
8
11
7 7
1500G 1500G
hasp hasp keeper keeper
zinc plated zinc plated
11
8 8
1500H 1500H
top pipe pipe holder holder top
zinc plated zinc plated
4 4
9 9
1500I 15001
bottom zincplated plated bottom pipe pipeholder holder zinc
4 4
4
section view view of of section end lug lug and end and keeper keeper
solid base solid base keeper keeper
166 166
Request Info
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1-800-453-1692 www.aboveboardelectronics.com
9
2
componentsmay may be be purchased purchased separately separately I components thesekits kitshave havenewly newly designed designed keepers keepers with with added added material material I •●these at their their base for increased and durability durability at base for increased strength strength and
*AO
bottom bottom options options
top top and and bottom bottom pipe pipe holders holders
Hinges and IndustrialHarcliA-re Hardware Hinges and industrial
Build Your Your Own Bar Lock Lock Kit Build Own Bar Kit
-4- 1.00 1.00 [25.4] .18 [4.6] [25.4] wide wide xx.18 [4.6] thick thick
Example No. Example Part Part No.
Ø.328 [8.33] [8.33] (2) (2) holes A0.328 holes
1500 1 3 2B B 1500 --1 3 2
4
Option Option 1 1 4.25 4.25 [108.0] [108.0]
packaging packaging option option B B (bulk) (bulk) P P (polybagged) (polybagged)
at-7
AL - 11111111 1500E 1500F 1500E 1500F
bottom pipe holder holder option bottom pipe option
base number includes: includes: base part part number ● lug (1pc.) (1pc.) • 1500C 1500C top top lug • 1500D ● lug (1pc.) (1pc.) 1500D bottom bottom lug ● top pipe pipe holders holders (4pcs.) (4pcs.) • 1500H 1500H top ● (1pc.) • 1500F 1500F or or 1600F 1600F grip grip (1pc.)
1.25 [31.8] [31.8] wide .24 [6.1] -1.25 wide xx .24 [6.1] thick thick
wit.
1500G -4-1500G
handle & keeper handle & keeper option option lug lug keeper keeper option option
1.25 [31.8] .15 [3.8] 1.25 [31.8] wide wide xx.15 [3.8] thick thick .328 [8.33] [8.33] sq. sq. (2) .328 (2) places places
Lug Keeper Lug Keeper Options Options Options Options
Component Part No. Component Part No.
11
1500A & 1500B 1500A & 1500B
2 2
1500A-01 & 1500B-01 1500A-01 &1500B-01
Latches
Bar Locks Locks Bar
Description Description
Finish Finish
standard base base top top& & standard bottom bottom keeper keeper
zinc plated zinc plated
solid base top & & solid base top bottom bottom keepers keepers
zinc plated zinc plated
Option Option 2 2
1.25 1.25 [31.8] [31.8] wide wide xx .24 .24 [6.1] [6.1] thick thick 4.75 4.75 [120.7] [120.7] 1500E 1500E
1500G-01 74 1500G-01
1500F 4 1500F
A- 1.00 1.00 [25.4] .18 [4.6] [25.4] wide wide xx.18 [4.6] thick thick •
/Th
/410%, k
Option 1: 1: Standard Option Standard Base Base part no. 1500A 1500A -- top top part no. part no. 1500B 1500B -- bottom part no. bottom
Option 2: 2: Solid Option Solid Base Base part - top part no. no. 1500A-01 1500A-01 -top part part no. no. 1500B-01 1500B-01 -- bottom bottom
Option Option 3 3 )1P
1 14 4.25 4.25 [108.0] [108.0]
Ø.315 [8.00] [8.00] (2) (2) holes 0.315 holes 1.25[31.8] [31.8] wide wide x.24 x .24 [6.1] [6.1] thick f 1.25 thick
1500E 1500F 11.11111 t-1500E 1500F . 1500GSS -(-1500GSS
Handle & & Keeper Keeper Options Handle Options Options Options
Component Component Part. Part. No. No.
Description Description
Finish Finish
11
1500E & 1500G 1500E & 1500G
handle & keeper handle & keeper
zinc plated zinc plated
2 2
1500E & 1500G-01 1500E & 1500G-01
handle & keeper handle & keeper
zinc plated zinc plated
3 3
1500E & 1500GSS 1500E & 1500GSS
handle & handle & 304SS keeper 304SS keeper
zinc plated & zinc plated & electropolished electropolished
4 4
1600E & 1600G 1600E & 1600G
5 5 6 6
heavy & keeper heavy handle handle & keeper
zinc plated zinc plated
1600E & 1600GSS 1600E & 1600GSS
heavy & heavy handle handle & 304SS keeper 304SS keeper
zinc plated & zinc plated & tumbled tumbled
1600E & 1600GSS01 1600E & 1600GSSO1
heavy & heavy handle handle & 304SS keeper 304SS keeper
zinc plated & zinc plated & electropolished electropolished
2.00 [50.8] [50.8] wide .18 [4.6] [4.6] thick -4- 2.00 wide xx.18 thick Ø.391 [9.93] [9.93] 0.391 1.25 [31.8] .38 [9.7] v 1.25 [31.8] wide wide xx.38 [9.7] thick thick I
3.81 [96.8]
I 1600EW 1600F 1600E 1600F
Option Option 4 4
.563 [14.30] .438 [11.13] JIL---.563 [14.30] xx.438 [11.13] obround obround
4-1600G 1600G 2.00 [50.8] [50.8] wide .18 [4.6] [4.6] thick -4- 2.00 wide xx.18 thick Ø.391 [9.93] [9.93] 0.391 1.25 1.25 [31.8] [31.8] wide wide xx .38 .38 [9.7] [9.7] thick thick 3.81 3.81 [96.8] [96.8]
Bottom Pipe Pipe Holder Bottom Holder Options Options Options Options
Component Component Part. Part. No. No.
11
1500I 15001
2 2
1500IP 15001P
Option Option 5 5
Description Description
Finish Finish
steel bottom holder steel bottom holder
zinc plated zinc plated
thermoplastic bottom thermoplastic bottom holder (stackable) holder (stackable)
gray gray
+
1600E 4-1600E
1600F 4-1600F
.563 [14.30] .563 [14.30] xx .438 .438[11.13] [11.13]obround obround 1600GSS 1600GSS
1.00 [25.4] widex.18 x .18[4.6] [4.6] thick thick -4-1.00 [25.4] wide Ø.380 [9.65] [9.65] (2) (2) holes 0.380 holes
Option Option 6 6 Option 1: Option 1: Steel Steel Base Base part part no. no. 1500I 15001
Option 2: 2: Plastic Option Plastic Base Base part no. 1500IP 15001P part no.
4.25 4.25 [108.0] [108.0]
1.25 .38 [9.7] 1.25 [31.8] [31.8] wide wide xx.38 [9.7] thick thick
1600E '4-1600E
1600F 1600F
1600GSS01 4-1600GSSO1
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
167
SPrgeRA PACIFIC ENGINEERING AND ,--- num
Latches
m
ai s ki
ta
co —1
1400 SeriesEconomy EconomyCam Cam Action Action Side Side Door Door Lock Lock 1400 Series Economy Kit Shown Economy Kit Shown
Economy Economy Kits Kits with with Fixed Fixed Pin Pin Pivot Pivot Hinge Hinge
componentsmay may be be purchased purchased separately separately I components
part number shipped in in bulk bulk part number 1400-112B 1400-112B shipped part number in polybag part number 1400-112P 1400-112P shipped shipped in polybag Item Item
Component Component Part Part No. No.
Description Description
Finish Finish
Qty. Qty.
11
1400A 1400A
pivot pivot hinge hinge with fixed fixed pin with pin
zinc plated zinc plated
22
2 2
1500E 1500E
handle grip handle without without grip
zinc plated zinc plated
1 1
3 3
1500F 1500F
PVC PVChandle handle grip grip
black black
1 1
4 4
1500G 1500G
hasp hasp keeper keeper
zinc plated zinc plated
1 1
Economy Economy Kits Kits with with Removable Removable Pin Pin Pivot Pivot Hinge Hinge part number shipped in in bulk bulk part number 1400-212B 1400-212B shipped Component Component Part Part No. No.
1400-112B
standard standard 3/4 [19] dia. 3/4 [19] dia. pipe pipe not not included included
1400-112P
part number in polybag part number 1400-212P 1400-212P shipped shipped in polybag Item Item
pivot pivot hinge hinge options options
1
1400-212B
Description Description
Finish Finish
Qty. Qty.
1400-212P handle & keeper handle & keeper options options
1400-142B
11
1400A-01 1400A-01
pivot pivot hinge hinge with removable with removable pin pin
zinc plated zinc plated
22
2 2
1500E 1500E
handle grip handle without without grip
zinc plated zinc plated
1 1
1400-242B
3 3
1500F 1500F
PVC PVChandle handle grip grip
black black
1 1
1400-242P
4 4
1500G 1500G
hasp hasp keeper keeper
zinc plated zinc plated
1 1
1400-142P 4
3
Heavy Kits with Heavy Duty Duty Kits with Fixed Fixed Pin Pin Pivot Pivot Hinge Hinge part number shipped in in bulk bulk part number 1400-142B 1400-142B shipped part number in polybag part number 1400-142P 1400-142P shipped shipped in polybag Item Item
Component Component Part Part No. No.
Description Description
Finish Finish
2
Qty. Qty.
handle & keeper handle & keeper options options
11
1400A 1400A
pivot pivot hinge hinge with fixed fixed pin with pin
2 2
1600E 1600E
heavy heavy duty duty handle handle without without grip grip
zinc plated zinc plated
1 1
3 3
1600F 1600F
PVC PVChandle handle grip grip
black black
1 1
4 4
1600G 1600G
hasp hasp keeper keeper
zinc plated zinc plated
1 1
zinc plated zinc plated
22
Heavy Heavy Duty Duty Kits Kits with with Removable Removable Pin Pin Pivot Pivot Hinge Hinge part number shipped in in bulk bulk part number 1400-242B 1400-242B shipped part number in polybag part number 1400-242P 1400-242P shipped shipped in polybag
(2) (2) bushings, bushings, zinc zinc plated plated
Finish Finish
Qty. Qty.
1400A-01 1400A-01
pivot pivot hinge hinge with removable pin pin with removable
zinc plated zinc plated
22
2 2
1600E 1600E
heavy heavy duty duty handle handle without grip grip without
zinc plated zinc plated
1 1
3 3
1600F 1600F
PVChandle handle grip grip PVC
black black
1 1
4 4
1600G 1600G
hasp hasp keeper keeper
zinc plated zinc plated
1 1
11
168 168
Component Component Part Part No. No.
Description Description
Item Item
Request Info
1-800-453-1692
Download 31:Immo @ Download @www.spep.com www.spep.com www.aboveboardelectronics.com
vinyl end vinyl end cap cap options options
Optional Vinyl Cap Cap Optional Vinyl part part no. no. 1400B 1400B
Hinges and Hinges and Industrial industrial Hardware Hardware
Ø.328 [8.33] [8.33] (2) (2) holes <0.328 holes
1400 B 1400 -- 11 3 32 2B
1.25 1.25 [31.8] [31.8] wide wide xx .24 .24 [6.1] [6.1] thick thick
Option Option 1 1 4.25 4.25 [108.0] [108.0]
packaging packaging option option B B (bulk) (bulk) P P (polybagged) (polybagged)
-11111 . 1500E 1500F 1500E 1500F
end end cap cap option option
base base part part number number
-4-1500G 1500G
handle & & keeper handle keeper option option
Pivot Pivot Hinge Hinge Options Options
pivot pivot hinge hinge option option
Component Component Part No. Part No.
Options Options 11
1400A 1400A
22
1400A-01 1400A-01
33
1400C 1400C
Latches
Bar Locks Locks Bar .4- 1.00 1.00 [25.4] [25.4] wide wide xx .18 .18 [4.6] [4.6] thick thick
Build Your Your Own Bar Lock Lock Kit Build Own Bar Kit Example Part Part No. Example No.
Description Description
Finish Finish
hinge fixed pin hinge with with fixed pin
zinc plated zinc plated
hinge with removable pin hinge with removable pin
zinc plated zinc plated
hinge fixed pin hinge with with fixed pin
zinc plated zinc plated
1.25[31.8] [31.8]wide wide x.15 x .15 [3.8] [3.8] thick 4- 1.25 thick
►
[8.33]sq.(2) (2)places places 4- .328.328 [8.33]sq. Option Option 2 2
1.25 1.25 [31.8] [31.8] wide wide xx .24 .24 [6.1] [6.1] thick thick
C)
4.75 4.75 [120.7] [120.7]
V
1500E AL15130E 1500G-01 ° -4-1500G-01
1500F 1500F
1.00[25.4] [25.4]wide wide x.18 x .18 [4.6] [4.6] thick <- 1.00 thick
-0-
Ø.315 [8.00] (2)holes holes 4- 0.315 [8.00] (2) Option 1 Option 1 part no. 1400A part no. 1400A
Option 2 O ion 2 part no. part no. 1400A-01 1400A-01
Option 3 ODtion 3 part part no. no. 1400C 1400C
0
.1 Iv 1.25 1.25 [31.8] [31.8] wide wide xx .24 .24 [6.1] [6.1] thick thick
Option Option 3 3 0
4.25 425 [108.0] [108.0] 1500E 1500F 11.11111 AL15130E 1500F . 1500GSS -4- 1SOOGSS
Handle & & Keeper Keeper Options Handle Options Options Component ComponentPart Part No. No. Options
Description Description
Finish Finish
1 1
1500E 1500G 1500E & & 1500G
handle & keeper handle & keeper
zinc plated zinc plated
2 2
1500E 1500G-01 1500E & & 1500G-01
handle & keeper handle & keeper
zinc plated zinc plated
3 3
1500E 1500GSS 1500E & & 1500G55
handle handle & & stainless stainless steel steel keeper keeper
zinc plated & zinc plated &
4 4
1600E 1600G 1600E & & 1600G
5 5 6 6
heavy duty heavy duty handle handle & & steel steel keeper keeper heavy duty heavy duty handle handle & &
1600E 1600GSS 1600E & & 1600G55 1600E 1600GSS01 1600E & & 1600G5501
2.00 [50.3] [50.3] wide wide xx .18 .18 [4.6] -4- 2.00 [4.6] thick thick Ø.391 [9.93] [9.93] 0.391 (p 1.25 [31.8] wide wide xx .38 .38 [9.7] [9.7] thick thick 1.25 [31.8]
electropolished electropolished zinc plated zinc plated
3.81 3.81 [96.8] [96.8] Option Option 4 4
T
zinc plated & zinc plated &
stainless stainless steel steel keeper keeper
tumbled tumbled
heavy duty heavy duty handle handle & &
zinc plated & zinc plated &
stainless stainless steel steel keeper keeper
electropolished electropolished
1600E 1600E
1600F 1600F
.563 563 [14.30] [14.30] xx .438 .438 [11.13] [11.13]obround obround 1600GSS 4-1600GSS
2.00 [50.8] [50.8] wide .18 [4.6] [4.6] thick -4- 2.00 wide xx.18 thick
1500Fand and 1600F 1600F grips handles I 1500F grips are are included included with with corresponding corresponding handles
Ø.391 [9.93] [9.93] 0.391 1.25 1.25 [31.8] [31.8] wide wide xx .38 .38 [9.7] [9.7] thick thick
.1 4
3.81 3.81 [96.8] [96.8] Option Option 5 5
JIM/
1600E 4-1600E
Part No. No. 1400B 1400B Vinyl Vinyl End End Cap Part Cap Options Options Options Options
Description Description
1
end end caps caps included included
2 2
•
1600F 4-1600F
.563 [14.30] .438 [11.13] .563 [14.30] xx.438 [11.13] obround obround 1600G 1600G
no end end caps caps included no included
[50.8] widex.18 x .18[4.6] [4.6] thick thick 4-2.002.00 [50.8] wide Ø.380 [9.65] [9.65] (2) (2) holes 0.380 holes
Option Option 6 6
Optional Vinyl Vinyl Cap Cap Optional part no. 1400B part no. 1400B
4.25 4.25 [108.0] [108.0]
f 1.25 1.25 [31.8] [31.8] wide wide xx .38 .38 [9.7] [9.7] thick thick
1600E '-1600E
1600F 1600F
1600GSS01 4-1600G5501
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
169
Latches
SPrgeRil PACIFY' IGINEERING
AND PRODUCTS
1420 Series Steel Steel Bar Bar Lock Lock Assembly 1420 Series Assembly Part Part
Description Description
Finish Finish
Dim. Dim. A A
Dim. B B Dim.
welded bar bar lock welded lock
zinc zinc plated plated
45.0 45.0 [1,143] [1,143]
[572] [572]
zinc zinc plated plated
48.0 48.0 [1,219] [1,219]
[610] [610]
Number Number 1400A 1400A pivot pivothinge hinge welded in place place welded in (2) pieces (2) pieces
1420-02 1420-02 1420-03 1420-03
1600E 1600E handle handle welded in place place welded in
assembly assembly welded bar bar lock welded lock assembly assembly
22.5 22.5 24.0 24.0
includes: I includes: weldedbar barlock lockassembly assembly I welded haspkeeper, keeper, 1600G I hasp 1600G PVC handle handle grip, I PVC grip, 1600F 1600F PVC end end caps, caps, (2) I PVC (2) pieces pieces pivothinges hingesand andhandle handle are are welded I pivot welded to to pipe pipe
1600F 1600F PVC handle PVC handle grip grip
A
1600G 1600G hasp hasp keeper keeper
B 3/4 [19] dia. 3/4 [19] dia. pipe pipe
PVC end PVC end cap cap (2) pieces (2) pieces
1430 Series Steel Steel Bar Bar Lock Lock Assembly 1430 Series Assembly Part Part
A 3/4 [19] dia.pipe pipe I-4(- 3/4 [19] dia.
1430-01 1430-01 1430-02 1430-02 1500E 1500E handle handle welded in in place place welded
Description Description
Finish Finish
Dim. Dim. A A
Dim. B B Dim.
welded bar bar lock welded lock
zinc zinc plated plated
36.0 36.0 [914] [914]
[457] [457]
zinc zinc plated plated
45.0 45.0 [1,143] [1,143]
[572] [572]
zinc zinc plated plated
45.0 45.0 [1,143] [1,143]
[305] [305]
Number Number
1430-04 1430-04 1500F 1500F PVC handle PVC handle grip grip
assembly assembly welded bar bar lock welded lock assembly assembly welded bar bar lock welded lock assembly assembly
18.0 18.0 22.5 22.5 12.0 12.0
includes: I includes: weldedbar barlock lockassembly assembly I welded haspkeeper, keeper, 1500G I hasp 1500G PVC handle handle grip, I PVC grip, 1500F 1500F pivothinges hingesand andhandle handle are are welded I pivot welded to to pipe pipe optionalvinyl vinyl cap, cap, 1400B I optional 1400B
A
1500G 1500G hasp keeper hasp keeper
B
1400C 1400C pivothinge hinge pivot welded in place place welded in (2) pieces (2) pieces
Pivot Hinge Pivot Hinge Handle Handle Part Number Part Number
14.19 360.4
1500-01 1500-01
1.25 31.8 4.50 114.3 4.50[ 14.3]
Material Material
Finish Finish
steel steel
zinc plated zinc plated
3.25 82.6
.406 10.319 (2) HOLES
.58 14.7
5.54 140.7
RUBBER GRIP GRIP \ RUBBER
.500 [12.700] 12.700 C.D.S. C.D.S. PIN PIN 0.500 .236 [6.000 6.000 7 236 .73 18.6 .73[18.6] .157 4.000 .157[4.000]
170 170
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
.44 11.1 .44[11.1]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industrial Hardware Hardware
Latches
Bar Lock Lock Accessories Accessories Bar
co A
pita
tD
VI
1500A-01 1500A-4 11 6
1500A
1500B-01
1500B
1500A-05
1500B-05
1500D 1500D-05
"-"'
1500C
1500C-05
1600F
1500F
1500H 1500E 1600E 1400B
1500I (steel
1500IP (plastic)
1400A
1500G
1400A-01 1400A-01
1500G-01
H3-03 113-031111111%1111111tp H3-03A 113-03A H3-03SS 113-035S
1400C
1600GSS01 160005501
1500GSS
1600GSS
1600G
To Place 800.433.5554 I.
[email protected] To PlaceOrder: Order ( 800.4335554
[email protected]
171 171
Latches
PACH —qc
-ERING AND PRODUCTS
Heavy DutyThree Three Point PointDoor DoorLatches Latches for for11/2" Heavy Duty /2" Sq. Sq. Shaft Shaft Features Features 2.50 63.5 2.50[63.5]
threepoint pointcenter centercase caseallows allows the the inside inside handle to override override the I three handle to the outside handle, even even if if the handle is is locked locked or outside handle, the outside outside handle or jammed jammed (used with handles handles that thathave haveaa180° 180° or or 360° 360° rotation only) (used with rotation only) all parts parts are are zinc zinc plated I all plated acceptshandles handleswith with.500 .500[12.70] [12.70] sq. sq. shaft. I accepts shaft. (refer 28-45) (refer to to handles handles on on pages pages 28-45) eachpart partnumber numbermay may be be ordered ordered separately separately I each lengths available available otherrod rodlengths I other available in in 316SS 316SS as I ** available as aa kit kit — — part part no. no. 731SS 73155 (kit includes: case, hardware hardware kit kit & & inside (kit includes: center center case, inside handle) handle) ** available in in 316SS 316SS and I **available and in in different different lengths lengths
2.25 57.2 2.25[57.2] 3
1 2
1.25 31.8 1.25[31.8]
.288 7.32 0.288[7.32] (4) HOLES HOLES (4)
Lock Rods Lock with with 33.25 33.25 [844.6] [844.6] Connecting Connecting Rods Part length: 73.1 73.1 [1,857] [1,857] -- 76.2 PartNo. No. 730-01 730-01 --length: 76.2 [1,936] [1,936] Item Item
SQUARE HOLE HOLE SQUARE ACCEPTS .500 .500 [12.70] [12.70] ACCEPTS SQUARE SHAFT SHAFT SQUARE 2.25 57.2
8.69 220.7
7.44 189.0
4
2.52 63.9
LENGTH
2.50 63.5 2.50[63.5]
a,
Component Component Part Part No. No.
Description Description
11
730* 730*
three point point center center case case three
22
732* 732*
hardware kit includes: includes: leaf leaf spring, hardware kit spring, (4) (4) cotter cotter pins, pins, (8) (2) 3/8 (8) 3/8 3/8 [10] [10] flat flat washers, washers, (2) 3/8 [10] [10] clevis clevis pins pins
3 3
734 734
(2) (2) end end bolts bolts and and housings housings
4 4
736* 736*
inside inside release release handle handle
55
737** 737**
(2) (2) 33.25 33.25 [844.6] [844.6]connecting connecting rods rods
1.88 47.6 1.88[47.6]
Lock Rods Lockwith with48.00 48.00 [1,219.2] [1,219.2] Connecting Connecting Rods Part length: 102.6 102.6 [2,606] 105.7 [2,685] [2,685] PartNo. No. 730-02 730-02 -- length: [2,606] --105.7
5
.270 6.86 0.270[6.86] (4) HOLES (4) HOLES
Item Item
1.45 36.9 1.45[36.9] 3.05 77.4 3.05[ 77.4 ]
Description Description
Part Part No. No.
730* 730*
three point point center center case case three
22
732* 732*
hardware kit includes: includes: leaf leaf spring, hardware kit spring, (4) (4) cotter cotter pins, pins, (8) (2) 3/8 (8) 3/8 3/8 [10] [10] flat flat washers, washers, (2) 3/8 [10] [10] clevis clevis pins pins
3 3
734 734
(2) (2) end end bolts bolts and and housings housings
4 4
736* 736*
inside inside release release handle handle
55
739** 739**
(2) (2) 48 48 [1,219] [1,219]connecting connecting rods rods
1 1
3.05 77.4
Component Component
Lock Rods Lockwith with43.88 43.88 [1,114.6] [1,114.6] Connecting Connecting Rods Part length: 94.4 94.4 [2,398] [2,398] -- 97.5 PartNo. No. 730-03 730-03 -- length: 97.5 [2,477] [2,477]
Striker Plate Striker Plate part J3079SS part no. no. J307955
Rod Rod Guide Guide
Item Item
part part no. no. 714SS 71455
Component Component
Description Description
Part Part No. No.
1 1
730* 730*
three point point center center case case three
22
732* 732*
hardware kit includes: includes: leaf leaf spring, hardware kit spring, (4) (4) cotter cotter pins, pins, (8) (2) 3/8 (8) 3/8 3/8 [10] [10] flat flat washers, washers, (2) 3/8 [10] [10] clevis clevis pins pins
3 3
734 734
(2) (2) end end bolts bolts and and housings housings
4 4
736* 736*
inside inside release release handle handle
55
740** 740**
(2) (2) 43.88 43.88 [1,114.6] [1,114.6]connecting connecting rods rods
Lock Rods Lock with with 36.00 36.00 [914.4] [914.4] Connecting Connecting Rods Part length: 78.6 78.6 [1,996] [1,996] -- 81.7 PartNo. No. 730-04 730-04 --length: 81.7 [2,075] [2,075] Item Item
172
Dimensions: Dimensions: 6.23" L xx .88" 6.23" L .88" W Wxx.125" .125"thick thick [158.2L xx 22.4W [158.2L 22.4W xx 3.18 3.18 thick] thick]
Dimensions: Dimensions: .88" H H xx 3.00" .88" 3.00" W W xx .94" .94" thick thick [22.4H xx 76.2W [22.4H 76.2W xx 2.39 2.39 thick] thick]
Material: Material: 316SS 316SS
Material: Material: 316SS 316SS
Download 31:Immo @ Download @www.spep.com www.spep.com
Component Component Part Part No. No.
Description Description
730* 730*
three point point center center case case three
22
732* 732*
hardware kit includes: includes: leaf leaf spring, hardware kit spring, (4) (4) cotter cotter pins, pins, (8) (2) 3/8 (8) 3/8 3/8 [10] [10] flat flat washers, washers, (2) 3/8 [10] [10] clevis clevis pins pins
3 3
734 734
(2) (2) end end bolts bolts and and housings housings
4 4
736* 736*
inside inside release release handle handle
55
738** 738**
(2) (2) 36 36 [914] [914]connecting connecting rods rods
1 1
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinge -- nri Industrial Hardware
DI
Features Features
11.1r1MI
2.25[57.2] 2.25 57.2 3
1
three point point center center case three case
2 2
732* 732*
hardware kit includes: includes: leaf leaf spring, hardware kit spring, (4) (4) cotter cotter pins, pins, (8) (8) 3/8 3/8 [10] [10] flat flat washers, washers, (2) (2) 3/8 3/8 [10] [10] clevis clevis pins pins
3 3
734 734
(2) (2) end end bolts bolts and and housings housings
4 4
736* 736*
inside inside release release handle handle
5 5
737** 737**
(2) (2) 33.25 33.25 [844.6] [844.6]connecting connecting rods rods
Lock Rods Lock with with48.00 48.00 [1,219.2] [1,219.2] Connecting Connecting Rods Part length: 102.6 [2,606] [2,606] --105.7 105.7 [2,685] [2,685] PartNo. No. 729-02 729-02 -- length:102.6 Component Item Component
Item
R
0 4
rn
2
csi
SQUARE HOLE HOLE SQUARE ACCEPTS .625 .625 [15.88] [15.88] ACCEPTS SQUARE SHAFT SHAFT SQUARE 2.25 57.2 2.25[57.2]
1.88 47.6 1.88[47.6]
5
Description Description
Part Part No. No.
729 729
three point point center center case three case
2 2
732* 732*
hardware kit includes: includes: leaf leaf spring, hardware kit spring, (4) (4) cotter cotter pins, pins, (8) (8) 3/8 3/8 [10] [10] flat flat washers, washers, (2) (2) 3/8 3/8 [10] [10] clevis clevis pins pins
3 3
734 734
4 4
736* 736*
inside inside release release handle handle
5 5
739** 739**
(2) (2) 48 48 [1,219] [1,219]connecting connecting rods rods
11
2.50 63.5 2.50[63.5]
2.52 63.9
729 729
LENGTH
11
2
8.69 220.7
Part length: 73.1 73.1 [1,857] [1,857] -- 76.2 PartNo. No. 729-01 729-01 --length: 76.2 [1,936] [1,936] Description Description
1.25 31.8 1.25[31.8]
.288 7.32 0.288[7.32] (4) HOLES HOLES (4)
7.44 189.0
Lock Rods Lock with with33.25 33.25 [844.6] [844.6] Connecting Connecting Rods Component Item Component Part Part No. No.
ffp n
2.50 63.5 2.50[63.5]
threepoint pointcenter centercase caseallows allows the the inside inside handle to override override the I three handle to the outside handle, handle, even even if if the outside handle handle is is locked locked or outside the outside or jammed jammed (used with handles handles that thathave haveaa180° 180° or or 360° 360° rotation only) (used with rotation only) all parts parts are are zinc zinc plated I all plated acceptshandles handleswith with.625 .625[15.88] [15.88] sq. sq. shaft. I accepts shaft. (refer pages 28-45) 28-45) (refer to to handles handles on on pages eachpart partnumber numbermay may be be ordered ordered separately separately I each lengths available available otherrod rodlengths I other available in in 316SS 316SS as I ** available as aa kit kit — — part part no. no. 731SS 73155 (kit includes: case, hardware hardwarekit kit & & inside (kit includes: center center case, inside handle)** handle)** available in available in 316SS 316SSand and in in different different lengths lengths
Item
Latches
Heavy Duty Three Latches for for 5/8" 5/8" Sq. Heavy Duty Three Point Point Door Door Latches Sq. Shaft Shaft
.270 6.86 0.270[6.86] (4) (4) HOLES HOLES 3.05 77.4
(2) (2) end end bolts bolts and and housings housings 1.45 36.9 1.45[36.9] 3.05 77.4 3.05[77.4]
Lock Rods Lock with with43.88 43.88 [1,114.6] [1,114.6] Connecting Connecting Rods Part length: 94.4 94.4 [2,398] [2,398] -- 97.5 PartNo. No. 729-03 729-03 --length: 97.5 [2,477] [2,477] Component Item Component
Item
Description Description
Part Part No. No.
Striker Plate Striker Plate
Rod Rod Guide Guide
Dimensions: Dimensions: 6.23" L xx .88" 6.23" L .88" W Wxx.125" .125" thick thick [158.2L xx 22.4W [158.2L 22.4W xx 3.18 3.18 thick] thick]
Dimensions: Dimensions: .88" H .94" thick .88" H xx 3.00" 3.00" W Wxx.94" thick [22.4H xx 76.2W [22.4H 76.2W xx 2.39 2.39 thick] thick]
Material: Material: 316SS 316SS
Material: Material: 316SS 316SS
part J3079SS part no. no. J307955
11
729 729
three point point center center case case three
2 2
732* 732*
hardware kit includes: includes: leaf leaf spring, hardware kit spring, (4) (4) cotter cotter pins, pins, (8) (8) 3/8 3/8 [10] [10] flat flat washers, washers, (2) (2) 3/8 3/8 [10] [10] clevis clevis pins pins
3 3
734 734
4 4
736* 736*
inside inside release release handle handle
5 5
740** 740**
(2) (2) 43.88 43.88 [1,114.6] [1,114.6]connecting connecting rods rods
part part no. no. 714SS 71455
(2) (2) end end bolts bolts and and housings housings
Lock Rods Lock with with36.00 36.00 [914.4] [914.4] Connecting Connecting Rods Part length: 78.6 78.6 [1,996] [1,996] -- 81.7 PartNo. No. 729-04 729-04 --length: 81.7 [2,075] [2,075] Component Item Component
Item
Description Description
Part Part No. No.
11
729 729
three point point center center case case three
2 2
732* 732*
hardware kit includes: includes: leaf leaf spring, hardware kit spring, (4) (4) cotter cotter pins, pins, (8) (8) 3/8 3/8 [10] [10] flat flat washers, washers, (2) (2) 3/8 3/8 [10] [10] clevis clevis pins pins
3 3
734 734
(2) (2) end end bolts bolts and and housings housings
4 4
736* 736*
inside inside release release handle handle
5 5
738** 738**
(2) (2) 36 36 [914] [914]connecting connecting rods rods
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
173 173
Latches
PACIFIC ENGINEERING AND PRODUCTS Heavy Duty Three Three Point Point Door DoorLatches Latchesfor for11/2" Heavy Duty /2" or or 5/8" 5/8" Sq. Sq. Shaft Shaft Features Features threepoint pointcenter centercase caseallows allows the the inside inside handle I three handle to to override handle, even even if if the is override the the outside outside handle, the outside outside handle handle is locked locked or or jammed jammed (used with handles thathave haveaa180° 180° or or 360° 360° rotation only) (used with handles that rotation only) all parts parts are are zinc zinc plated I all plated acceptshandles handleswith with.500 .500[12.70] [12.70]or or.625 .625 [15.88] [15.88] sq. I accepts sq. shaft. shaft. (refer 28-45) (refer to to handles handles on on pages pages 28-45) may be I each each part part number number may be ordered ordered separately separately
.500 00 [12.70 12.70] .5 38.11] 11.50 50[38 TRAVEL TRAVEL
1/2" 1/2" Sq. Sq. Shaft Shaft Hole Hole Part PartNo. No. 730-10 730-10
3 2.42 61.5 2.42[61.5]
I] .256 6.50 0.256[6.50] (2) (2) HOLES HOLES
Component Item Component Item Part Part No. No.
Description Description
1 1
730 730
(1) case with with (1) three three point point center center case 1/2[13] sq. 1/2[13] sq. shaft shaft hole hole
2 2
732 732
hardware kit includes: includes: leaf leaf spring, spring, (4) (4) hardware kit cotter pins, (8) (8) 3/8[10] cotter pins, 3/8[10] flat flat washers, washers, (2) (2) 3/8[10] 3/8[10] clevis clevis pins pins
3 3
718-02 718-02
5
36.1 918 36.1[918]
1.25 31.8 1.25[ 31.8]
SQUARE HOLE OPTIONS ARE SQUARE HOLE OPTIONS ARE .500 [12.70] OR OR .625 .625 [15.88] [15.88] SQUARE SQUARE .500 [12.70] (SEE PART NUMBER NUMBER TABLES) TABLES) (SEE PART
.288 7.32 ] 0 .288[7.32 (4) HOLES (4) HOLES
(1) (1) inside inside release release handle handle
5 5
745-36.00 745-36.00
(1) (1) 36.00 36.00 [914.4] [914.4] xx Ø.50 0.50 [12.7] [12.7] connecting rod connecting rod
6 6
745-48.00 745-48.00
(1) [12.7] (1) 48.00 48.00 [1,219.2] [1,219.2] xx Ø.50 0.50 [12.7] connecting rod connecting rod
8.69 220.7
2.52 63.9
2
7.44 189.0
2.50 63.5 2.50[63.5]
(2) (2) spring spring loaded loaded rod rod guides guides
4 736 736 4
5/8" 5/8" Sq. Sq. Shaft Shaft Hole Hole Part PartNo. No. 729-10 729-10
V
0
4
1
2.25 57.2 2.25[57.2]
Component Item Component Item Part Part No. No.
Description Description
11
729 729
(1) case with with (1) three three point point center center case 5/8[16] sq. 5/8[16] sq. shaft shaft hole hole
2 2
732 732
hardware kit includes: includes: leaf leaf spring, spring, (4) (4) hardware kit cotter pins, (8) (8) 3/8[10] cotter pins, 3/8[10] flat flat washers, washers, (2) (2) 3/8[10] 3/8[10] clevis clevis pins pins
3 3
718-02 718-02
1.88 47.6 1.88[47.6]
48.1 1223 48.1[ 223] 6
(2) (2) spring spring loaded loaded rod rod guides guides
4 736 736 4 3.60 91.4
(1) (1) inside inside release release handle handle
5 5
745-36.00 745-36.00
(1) (1) 36.00 36.00 [914.4] [914.4] xx Ø.50 0.50 [12.7] [12.7] connecting rod connecting rod
6 6
745-48.00 745-48.00
(1) [12.7] (1) 48.00 48.00 [1,219.2] [1,219.2] xx Ø.50 0.50 [12.7] connecting rod connecting rod
1.00 25.4 1 .00[25.4]
Striker Plate Striker Plate part J3079SS part no. no. J307955
Dimensions: Dimensions: 6.23”L thick 6.23"L xx .88”W .88"Wxx.125” .125"thick [158.2L xx 22.4W [158.2L 22.4W xx 3.18 3.18 thick] thick] Material: Material: 316SS 316SS
174 174
Download 3Dmootts @ Download @ www.spep.com www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industrial Hardware Hardware
allparts partsare are zinc zinc plated I all plated eachpart partnumber numbermay maybe be ordered ordered separately separately I each otherrod rodlengths lengthsavailable available I other see handle handle selection selection I see refertotohandles handleson onpages pages 28-45 28-45 I refer
Latches
Three Point Point Door Door Latches Latches with Ø3/8"Rods Rods and and Die Die Cast Cast Cam Three with 03/8" Cam Safety Lock Features Safety Lock Features
1.19 30.2 ] 1.19[30.2
With Dampening Dampening Rod Rod Guide With Guide Part No. 716-02 Part No. 716-02 Item Item
Component Component Part No. Part No.
Description Description
3
11
716 716
three point point center center case case three
2 2
717 717
hardware kit includes: hardware kit includes: (2) pins and and (2) (2) wave wave washers washers (2) cotter cotter pins
3 3
718 718
(2) (2) rod rod guides guides
4 4
719-48.00 719-48.00
(2) 48.00 (2) 48.00 [1,219.2] [1,219.2] xx Ø.38 0.38 [9.5] [9.5] connecting rods connecting rods
4
2.50 63.5 2.50[63.5]
1.00 25.4 ]
1
csicc;
Dampening Rod Rod Guide Dampening Guide part no. 718 part no. 718 see see page page 180 180
1.50 38.1 1.50[38.1] 1.75 44.5
6.25 158.8
co co Lc"
Item Item
SQUARE HOLE SQUARE HOLE ACCEPTS .313 .313 [7.94] [7.94] ACCEPTS SQUARE SHAFT SHAFT SQUARE
.281 7.14 0.281[7.14] (4) HOLES HOLES (4)
1.25 31.8
716-10 716-10
Component Component Part No. Part No.
.198 5.03 0.198[5.03] (4) HOLES HOLES (4)
Description Description
716 716
three point point center center case case three
2 2
717 717
hardware kit includes: hardware kit includes: (2) cotter pins and and (2) (2) wave wave washers washers (2) cotter pins
3 3
718-01 718-01
(2) spring (2) spring loaded loaded rod rod guides guides
719-48.00 719-48.00
(2) 48.00 (2) 48.00 [1,219.2] [1,219.2]xxØ.38 038 [9.5] [9.5] connecting rods connecting rods
11
4 4
',: c;
o) co
With Spring Spring Loaded Loaded Rod Rod Guide With Guide Part No. Part No.
5.38 136.5
2
1.25 31.8 1.25[31.8]
t ANTI- RATTLE RATTLE ANTIGROMMET GROMMET .375 .375[ 9.53
....,_.
SpringLoaded LoadedRod Rod Guide Guide Wine part 718-01 part no. no. 718-01 see page see page 180 180
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
175 175
Fifinwic
Latches
AregERRA
ENGINEERING AND
Three Point Cam Three Point Door Door Latches Latches with with Ø3/8" 03/8" Rods Rods and and Stamped Stamped Cam Features Features threepoint pointcenter center case case (part (part no. no. 716-05) allows the I three the inside inside handle handle 716-05) allows to override the outside handle, handle, even even if if the outside handle handle is is locked locked to override the outside the outside or or jammed jammed (used with handles thathave haveaa180° 180° or or 360° 360° rotation only) (used with handles that rotation only) eachpart partnumber numbermay may be be ordered ordered separately separately I each
1.19[30.2] [30.2] -4-1.19
With Dampening With Dampening Rod Rod Guide Guide -- No No Inside Inside Release Release
1.25 [31.8] [31.8] 1.25
Part PartNo. No. 716-04 716-04 Component Item Component
Item
Ø.198 [5.03] 0.198 [5.03] (4) places (4) places Ø.375 [9.53] 0.375 [9.53]
-tr. 1.25 [31.8] [31.8] 1.25
Description Description
Part Part No. No.
11
716-01 716-01
2 2
717 717
hardware kit includes: hardware kit includes: (2) (2) wave (2) cotter cotter pins pins and and (2) wave washers washers
3 3
718 718
(2) (2) dampening dampening rod rod guides guides
4 4
719-48.00 719-48.00
three point center center case case with with no three point no inside inside release release
(2) (2) 48.00 48.00 [1,219.2] [1,219.2]xxØ.38 0.38[9.5] [9.5]connecting connecting rods rods
1.75 [44.5] [44.5] 1.75 square hole square hole accepts .313" .313" accepts square shaft shaft square
5.38 [136.5]
16'
With Dampening Rod Guide With Inside With Dampening Rod Guide -- With Inside Release Release Part PartNo. No. 716-06 716-06 Item Item
1.75 [44.5] [44.5] 1.75
2.25 2.25 [57.2] [57.2]
2
co
1
5
Component Component Part Part No. No.
11
716-05 716-05
2 2
717 717
3 3
718 718
4 4
719-48.00 719-48.00
5 5
736-01 736-01
Description Description three point point center center case with inside three case with inside release release hardware kit includes: hardware kit includes: (2) (2) wave (2) cotter cotter pins pins and and (2) wave washers washers (2) (2) dampening dampening rod rod guides guides (2) (2) 48.00 48.00 [1,219.2] [1,219.2]xxØ.38 0.38[9.5] [9.5]connecting connecting rods rods inside handle inside handle
Ø.281 [7.14] 0.281 [7.14] (4) holes (4) holes
With Spring With Spring Loaded Loaded Rod Rod Guide Guide -- No No Inside Inside Release Release 1.00 [25.4]
2.50 [63.5] 2.50 [63.5]
Part 716-11 PartNo. No. 716-11 Component Item Component
Item 4 2.25 [57.2] 2.25 [57.2]
11
716-01 716-01
2 2
717 717
3 3
718-01 718-01
4 4
719-48.00 719-48.00
3
4-
1.75 [44.5] [44.5] 1.75
Description Description
Part Part No. No.
three point center center case case with with no three point no inside inside release release hardware kit includes: hardware kit includes: (2) (2) wave (2) cotter cotter pins pins and and (2) wave washers washers (2) (2) spring spring loaded loaded rod rod guides guides (2) (2) 48.00 48.00 [1,219.2] [1,219.2]xxØ.38 0.38[9.5] [9.5]connecting connecting rods rods
With Spring With Inside With Spring Loaded Loaded Rod Rod Guide Guide --With Inside Release Release Part PartNo. No. 716-12 716-12 Item Item
Spring Loaded Loaded Rod Rod Guide Spring Guide part 718-01 part no. no. 718-01
176 176
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Component Component
Description Description
Part Part No. No.
11
716-05 716-05
2 2
717 717
3 3
718-01 718-01
4 4
719-48.00 719-48.00
5 5
736-01 736-01
three point point center center case with inside three case with inside release release hardware kit includes: hardware kit includes: (2) (2) wave (2) cotter cotter pins pins and and (2) wave washers washers (2) (2) spring spring loaded loaded rod rod guides guides (2) (2) 48.00 48.00 [1,219.2] [1,219.2]xxØ.38 0.38[9.5] [9.5]connecting connecting rods rods inside handle inside handle
Dampening Rod Guide Dampening Rod Guide 718 part part no. no. 718
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and and Industrial industrial Hardware Hardware
3-Point Latch Set Cam 3-Point Latch Set with with Stamped Stamped Cam
2-Point Swivel Swivel Set Set with with Rod Rod Guides 2-Point Guides
2-Point Latch Latch Set 2-Point Set
720LH 720LH
left left hand hand
zinc plated zinc plated
I720LH-03
720LH-03
left left hand hand
zinc plated zinc plated
720RH 720RH
right right hand hand
zinc plated zinc plated
720RH-03 720RH-03
right right hand hand
zinc plated zinc plated
Part Part Number Number
LL or R or R
Finish Finish
(2) 0.312 Ø.312 [7.92] [7.92] xx48 48 [1,219] [1,219] long I (2) long steel steel rods rods (2) steel steel rod rod guides guides included included in in set I (2) set seehandle handleselection selection on on pages pages 28-45 28-45 I see
Part Part Number Number
LL or R or R
I 72248
Part Part Number Number
Finish Finish
Description Description
Finish Finish
72248
with steel with steel rod rod guide guide
zinc plated zinc plated
72248N 72248N
with nylon zincplated plated with nylon rod rodguide guide zinc
Latches
Door Door Latch Latch Sets Sets
(2) 0.312 Ø.312[7.92] [7.92] xx 48.75 I (2) 48.75 [1,238.3] [1,238.3]long long steel steel rods rods attachestoto.312 .312[7.92] [7.92] square square shaft shaft with with set screw I attaches set screw (2) rod rod guides guides included included in in set I (2) set (see for material (see table table for material option) option) seehandle handleselection selection on on pages pages 28-45 28-45 I see
(2) 0.312 Ø.312[7.92] [7.92] xx 48 I (2) 48 [1,219] [1,219]long long steel steel rods rods (2) steel steel rod rod guides guides included included in in set I (2) set seehandle handleselection selection on on pages pages 28-45 28-45 I see
1.14 [29.0]
1.14 [29.0] [29.0] t-1.14
.4— 1.14 1.14 [29.0] [29.0] Ø.188 [4.78] (2) (2) holes holes
Ø.188 [4.78] 0.188 [4.78] (2) holes (2) holes
Ø.188 [4.78] 0.188 [4.78] (2) holes (2) holes
1.50 [38.1] [38.1] -4— 1.50 Ø.195 [4.95] 0.195 [4.95] (2) holes (2) holes
8.75 8.75 [22.23] [22.23]
r
3.53 [89.7] 3.53 [89.7]
3.53 [89.7] 3.53 [89.7]
Ø.195 [4.95] 0.195 [4.95] (4) holes (4) holes 1.50 [38.1] [38.1] 1.50
square hole square hole accepts .313 [8.00] [8.00] accepts .313 square shaft shaft square
,
1.50 [38.1] [38.1] -4— 1.50
e
square hole square hole accepts .313 .313 [8.00] [8.00] accepts square shaft shaft square
i~
square hole square hole accepts .313 [8.00] [8.00] accepts .313 square shaft shaft square
[ )1 0
U
left left hand hand shown shown
left left hand hand shown shown
1.09 [27.7] [27.7] 1.09 Optional Nylon Nylon Guide Guide Optional (2) pieces (2) pieces Request Info
1-800-453-1692
To Place 800.433.5554 OM
[email protected] [email protected] PlaceOrder: Order ta 800.433.5554
www.aboveboardelectronics.com To
177 177
Latches
SIERRA PACIFIC ENGINEEPNG AND PRODUCTS
Two Point Two Point Latch Latch Set Set
EW RC DI i,AMILY
Latch Kit Latch Kit -- No No Inside Inside Release Release Handle Handle Part 716-26 PartNo. No. 716-26 Component Item Component Part No. Part No.
Description Description
Item
44.5 1.75 1.75 [44.5]
2.25 57.2 2.25[57.2] 3
1 1
716-25 716-25
2 2
719-48.00 719-48.00
3 3
718 718
(2) rod (2) rod guides guides with with rubber rubber damper damper
4 4
717 717
(2) pins and and (2) (2) wave wave washers washers (2) cotter cotter pins
(1) two point center center case case (1) two point (2) 48.00 (2) 48.00 [1,219.2] [1,219.2]xxØ.38 038 [9.5] [9.5] connecting connecting rods rods
steel, zinc zinc plated I steel, plated eachpart partnumber numbermay maybe be ordered ordered separately separately I each seehandle handleselection selectionon onpages pages 28-45 28-45 I see
.375 9.53 0.375[9.53] TYP. TYP.
1.00 [25.4] 25.4 1.00
2
Latch Kit Latch Kit -- With With Inside Inside Release Release Handle Handle
5
Part No. 716-27 Part No. 716-27 1.25 [31.8] 31.8 1.25
Component Item Component Item Part No. Part No.
44.5 1.75 1.75 [44.5] 5.38 [136.5 5.38 36.5]
4
ACCEPTS A ACCEPTS A .313 [7.94] [7.94] SQ. SQ. .313 SHAFT SHAFT
6.25 [158.8 6.25 58.8]
1
1 1
716-25 716-25
2 2
719-48.00 719-48.00
Description Description (1) two point pointcenter center case case (1) two (2) (2) 48.00 48.00 [1,219.2] [1,219.2]xxØ.38 0.38[9.5] [9.5]connecting connecting rods rods
3 3
718 718
(2) (2) rod rod guides guides with with rubber rubber damper damper
4 4
717 717
(2) cotter pins and and (2) (2) wave wave washers washers (2) cotter pins
55
736-01 736-01
(1) inside (1) inside release release handle handle
steel, zinc zinc plated I steel, plated eachpart partnumber numbermay maybe be ordered ordered separately separately I each seehandle handleselection selectionon onpages pages 28-45 28-45 I see
.281 7.14 0.281[7.14] (4) HOLES HOLES (4) 2.25 [57.2] 57.2 2.25
1.19 [30.2] 30.2 1.19 TYP. TYP.
1.25 31.8 1.25[31.8] TYP. TYP.
.198 [5.03] 5.03 0.198 (8) HOLES HOLES (8)
Center Case Center CaseLatch Latch 4:111 Part Part Number Number
753 753 .236 [6.00] HOLE WITH WITH 6.00 HOLE 0.236 .39[10.0] [10.0] xx 100° 100 C'SINK C'SINK 0.39 (2) PLACES PLACES (2)
3.94 3.94 100.0 00.0]
.77 [19.6] 19.6 .77
Material Material
Finish Finish
steel steel
zinc plated zinc plated
camrotates rotates 180° 180° I cam camdetents detentsevery every 90° 90° I cam canbe beused used as as left I can left hand hand or or right right hand hand
.06 [1.5] 1.5 .06 OFFSET OFFSET
ACCEPTS A ACCEPTS A .313 [7.94] [7.94] SQ. .313 SQ. SHAFT SHAFT .95 [24.0] 24.0 u .95 3.00 [76.2] 76.2 3.00
4.92 [125.0 4.92 25.0]
90° 90° CW CW ROTATION ROTATION 90° 90° CCW CCW ROTATION ROTATION
.96 [24.5] 24.5 .96 I
V
.098[2.50] 2.50 -..-.098
1
1.06 [27.0] 27.0 1.06
178
Download www.spep.com Download3DmoDELs @ @ www.spep.com
.51 [13.0] 13.0 .51
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges and Industrial industrial bfrrdWare
Style Style
Sq. Sq. Shaft Shaft Hole Size Hole Size
729 729
left & .636[16.15] [16.15] left & right righthand hand .636
730 730
left & .511[12.98] [12.98] left & right righthand hand .511
steel,zinc zinc plated plated finish finish housing I steel, housing diecast castzinc, zinc, mill mill finish finish cam cam I die usedwith withhandles handlesthat thathave haveaa 180° 180° or I used or 360° rotation 360° rotation only only withoverride override I with seehandle handleselection selectionon onpages pages 28-45 28-45 I see
2.25 57.2 2.25[57.2]
1.88 47.6 1.88[47.6]
2.15 54.7 -9-2.15[54.7]
.62 15.9 .62[ 5.9]
Latches
Three Point Point Center Center Case Case Latches Latches Three Part Part Number Number
.22 5.7 .22[5.7] GRIP
2.50 63.5 2.50[63.5]
2.52 63.9 2.52[63.9]
7.44 189.0 7.44[ 89.0]
8.69 220.7 8.69[220.7]
.375 9.53 0.375[9.53] (2) PLACES
SHAFT HOLE SIZE 2.15 54.7 02.15[54.7 .288 7.32 0.288[7.32] (4) HOLES
Part No. & 730 Part No. 729 729 & 730
.177 4.50 1.25 31.8 1.25[31.8
1.30 33.1
Bi-directionalCenter CenterCase Case Latch Latch for Bi-directional for 1/2" 1/2" Sq. Sq. Shaft Shaft Part Part Number Number
Style Style
Sq. Sq. Shaft Shaft Hole Size Hole Size
730-51 730-51
bi-directional bi-directional
.511 [12.98] .511 [12.98] 1.25 [31.8] 31.8 1.25
camrotates rotates 180° 180° I cam camdetents detentsevery every 90° 90° I cam canbe beused used as as left I can left hand hand or or right right hand hand seehandle handleselection selectionon onpages pages 28-45 28-45 I see
2.63 [66.7] 66.7 2.63
.118 3.00 .118[3.00]
.511 [12.98] .511 [12.98] SQUARE SQUARE
6.18 157.0 6.18[ 57.0]
7.44 7.44 [189.0 89.0]
90° CW CW 90° ROTATION ROTATION
8.69 [220.7] 220.7 8.69
90° CCW CCW 90° ROTATION ROTATION
.288 [7.32] 7.32 0.288 (4) HOLES HOLES (4)
1.26 [32.0] 32.0 1.26
25.4 -999-1.00 1.00 [25.4]
57.2 2.25 [57.2]
Two Point Case Latch Two Point Center Center Case Latch for for 5/16" 5/16" Sq. Sq. Shaft Shaft Part Part Number Number
Style Style
Sq. Sq. Shaft Shaft Hole Size Hole Size
716-25 716-25
left & & right hand left right hand
.329 329 [8.36] [836]
57.2 2.25 [57.2]
steel, zinc zinc plated plated finish I steel, finish nooverride override I no seehandle handleselection selectionon onpages pages 28-45 28-45 I see
1.30 33.1 .30[33.1] .44 11.1 44 [11.1]
1.63 41.4 01.63[41.4]-,
6.25 [158.8 158.8]
1.75 44.5 1.75[44.5]
5.38 [136.5 36.5]
.236 6.00 0.236[6.00] (2) PLACES
.329 [8.36] SQ.
1.25 31.8 1.25[31.8]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.281 [7.14] 7.14 0.281 (4) HOLES
.118 3.00 .80 20.3
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
179
Latches
PACIFIC ENGINE' —
R
--
Zinc Plated Zinc Plated Ø3/8" 03/8" Rod Rod with with Offset Offset LENGTH
.30 7.5 .30[7.5]
Ii .375 9.53 0.375[9.53]-1
.323 8.20 0.323[8.20] 6.5 164
Part Part Number Number
Length Length
Material Material
Finish Finish
719-36.00 719-36.00
36.00 [914.4] [914.4] 36.00
steel steel
zinc plated zinc plated
719-48.00 719-48.00
48.00[1,219.2] 48.00[1,219.2]
steel steel
zinc plated zinc plated
custom lengths can be made to your specifications .59 15.0 .55[15.0]
5.5 140 5.5[ 140]
Dampening Rod Guide Guide for for aa Ø3/8" Rod Dampening Rod 03/8" Rod Part Part Number Number
718 718
1.19 30.2
.59 15.1
Finish Finish
steel steel
zinc plated zinc plated
for use use with with part & 719-36.00 I for part no. no. 719-48.00 719-48.00 & 719-36.00 rubbergrommet grommet reduces reduces rattling rattling I rubber
.198 5.03 (4) HOLES
1.25 31.8
Material Material
TOP VIEW TOP NEW 2.25 57.2 .400 10.16
.110 2.80
11)
.97 24.66] 97[24
1.75 44.5
.48 12.3
= FRONT VIEW FRONT VIEW
RIGHT SIDE VIEW
Spring Loaded Rod Rod Guide for aa Ø3/8" Rod Spring Loaded Guide for 03/8" Rod Part Part Number Number
718-01 718-01
.256 0.256[6.50] .256 6.50 6.50 (2) (2) HOLES HOLES
2.44 2.44[62.0]2.44 62.0 62.0 TOP TOP WEW TOP VIEW VIEW
.177 .177 4.50 4.50 .177] 4.50] -.1 b
.425 .425 10.80 10.80 0.425[10.80
1.18 30.0 1.18 30.0 1.18[1 30.0]
Material Material
Finish Finish
steel steel
zinc plated zinc plated
stainless steel steel spring spring clip clip material material I stainless for use use with with part I for part no. no. 719-48.00 719-48.00 springclip clip reduces reduces rattling rattling I spring
.67 17.0 .67 17.0 67[17.0]
3.48 3.48 88.5 88.5 3.48[88.5]
.75 .75 19.0 19.0 .75[19.0]
FRONT FRONT VIEW VIEW FRONT VIEW
END END VIEW VIEW END VIEW
Zinc Plated Zinc Plated Ø1/2" 01/2" Rod Rod with with Offset Offset A A
.388 9.86 0.388[9.88]
-1
B B 8.43 214.1 8.43[214.1] .500 12.70 1.00 25.4 1.00[25.4]
Part Part Number Number
A A
B B
Material Material
Finish Finish
745-36.00 745-36.00
35.38" 35.38"
36.00" 36.00r
steel steel
zinc plated zinc plated
745-48.00 745-48.00
47.38" 47.38"
48.00" 48.00r
steel steel
zinc plated zinc plated
customlengths lengthscan canbe bemade madeto toyour your specifications specifications I custom for use use with with part & 730-10 I for part no. no. 729-10 729-10 & 730-10
6.31 160.2 8.31[180.2]
Spring Loaded Rod Rod Guide for aa Ø1/2" Rod Spring Loaded Guide for 01/2" Rod Part Part Number Number
718-02 718-02
.256 6.50 6.50 .256 0.256[6.50] (2) HOLES HOLES (2)
2.42 61.5 61.5 2.42 2.42[61.5] •C • TOP VIEW VIEW TOP TOP VIEW
.571 14.50 14.50 .571[14.50] 0 .571
.256 6.50 6.50 .256]6.50] .256
1.45 36.8 36.8 1.45[36.8 1.45
3.60 91.4 91.4 3.60[91.4] 3.60
1-114[290]
1
WAVY WASHER
180 180
Download 3DmoDELs @ @www.spep.com www.spep.com Download
HIGH HIGH
Part Part Number Number
717 717 .047 1.20 047[1 20]
.05 1.2 E.05[1.2] -
stainless steel steel spring spring clip clip material material I stainless for use use with with part & 745-48.00 I for part no. no. 745-36.00 745-36.00 & 745-48.00 springclip clip reduces reduces rattling rattling I spring
END VIEW VIEW END VIEW END
0 .33 sgs8.3s]
.010 [25] .25 .010 THICK THICK 1_
zinc plated zinc plated
1.00 25.4 1.00[25.4] 1.00 25.4
1.14 29.0
.47 [12.0] 12.0 0.47
Finish Finish
steel steel
.82 20.8 82[20.8] .82 20.8
FRONT VIEW VIEW FRONT VIEW FRONT
Hardware Hardware Kit Kitfor for33Point Point System System
Material Material
1
.75 19.1 h- 75[19 1] -.I
p
Description Description kit kit includes: includes: (2) (2) wave wave disc disc spring spring washers washers (2) (2) cotter cotter pins pins
1-1-0[228]-1 .90 22.8
/WITCO COTTER OM PIN
Request Info
1-800-453-1692 www.aboveboardelectronics.com
CUSTOM Hinge SPECIALISTS
Pages full of hinges... yet you still can’t find one to meet your exact needs?
We have We have the the solution! solution! Hinges product we sell. Hinges are are the the most most commonly commonly customized customized product we sell. Why Choose SIERRA for your yournext next custom custom hinge hinge requirement? Why Choose SIERRA PACIFIC PACIFIC for requirement? •
ISO Certified ISO 9001 9001 Certified
EPOWERED BY
ESOP 100%
ORAL EpP
ISO 9001
EMPLOYEE-OWNED
••
Assisted by the latest CAD CAD and Assisted by the latest and FEA FEAtechnology. technology.
••
In-house FUSED DEPOSITION MODELING (FDM) allows us to your vision into In-house FUSED DEPOSITION MODELING (FDM) allows us convert to convert your vision intoa aprototype prototypewithin within days. days.
••
Experienced Experienced Industrial IndustrialDesign Design team team ready ready to to assist assist with with your your challenge. challenge.
••
We have We have satisfied satisfied the the requirements requirements of of Fortune Fortune 500 500 companies companies
SIERRA PACIFIC
ENGINEERING AND PRODUCTS
800.433.5554 800.433.5554
[email protected] [email protected]
1Ko NEMA & JIC 014 LT4 1111:1
''TERRA PACIFIC
ENGINEr- AND PRODUCTS
Three Point Cabinet Latches Latches with with Tubular Tubular Rods Three Point Cabinet Rods Features Features madeof of strong strong lightweight lightweight tubular tubular steel steel rodsmade I rods rodscan can be be made madeto tospecial special lengths lengths or or different different hole I rods hole patterns patterns if if volume volume is is sufficient sufficient all components componentsare aremade madeof ofsteel steelwith withaa clear clear zinc zinc plated I all plated finish and finish and can can be be purchased purchased separately separately seehandle handleselection selection on on pages pages 28-45 28-45 I see
AdjustableCenter CenterCam Cam Kits Kits Adjustable part includes (2) (2) 18.83 [478.3] rods part number number 7080 7080 includes 18.83 [478.3] rods part includes (2) (2) 33.83 [859.3] rods part number number 7081 7081 includes 33.83 [859.3] rods part number includes (2) (2) 45.83 [1164.1] rods rods part number 7082 7082 includes 45.83 [1164.1] Item PartNo. No. Item Part
Description Description
Qty. Qty.
11
701 701
adjustable nylon roller roller center cam adjustable nylon center cam
11
2 2
710 710
adjustable adjustable rod rod guide guide
2 2
3 3
760 760
5/16-18 xx.60 .60 [15.2] [15.2] long 5/16-18 long shoulder shoulder bolt bolt
2 2
Dimension Dimension A A tubular rod rod length tubular length
available in in stainless stainless steel I available steel as as part part no. no. 7082SS 708255
Adjustable Center Center Cam Cam Adjustable part 701 part no. no. 701
AdjustableCenter CenterCam Cam with withCollar Collar Kits Kits Adjustable
center center cam cam options options
part includes (2) (2) 18.83 [478.3] rods part number number 7090 7090 includes 18.83 [478.3] rods part includes (2) (2) 33.83 [859.3] rods part number number 7091 7091 includes 33.83 [859.3] rods part number includes (2) (2) 45.83 [1164.1] rods rods part number 7092 7092 includes 45.83 [1164.1] Item PartNo. No. Item Part
adjustable nylon roller roller adjustable nylon center cam cam shown center shown
Description Description
Qty. Qty.
adjustable center cam cam with with collar collar adjustable center
11
11
701-01 701-01
2 2
710 710
adjustable adjustable rod rod guide guide
2 2
3 3
760 760
5/16-18 xx.60 .60 [15.2] [15.2] long 5/16-18 long shoulder shoulder bolt bolt
2 2
Adjustable Center Center Cam Cam with with Collar Collar Adjustable part 701-01 part no. no. 701-01
1 3
C
rod rod options options B
Fixed Center Cam Cam Kits Kits Fixed Center part includes (2) (2) 18.83 [478.3] rods part number number 7085 7085 includes 18.83 [478.3] rods part includes (2) (2) 33.83 [859.3] rods part number number 7086 7086 includes 33.83 [859.3] rods part number includes (2) (2) 45.83 [1164.1] rods rods part number 7087 7087 includes 45.83 [1164.1] Item PartNo. No. Item Part
A
Description Description
Qty. Qty.
11
700 700
fixed center fixed center cam cam
11
2 2
710 710
adjustable adjustable rod rod guide guide
2 2
3 3
760 760
5/16-18 xx.60 .60 [15.2] [15.2] long 5/16-18 long shoulder shoulder bolt bolt
2 2
A
2
see pg. pg. 186 186 for for details see details
Fixed Center Cam Cam Fixed Center part part no. no. 700 700
Section A A-A Section A tubular rod rod cross-section cross-section tubular
182 182
Request Info
1-800-453-1692
Download =)DmoDELs @ @www.spep.com www.spep.com www.aboveboardelectronics.com Download
Hinges and Hinges and Industrial industrial Hardware Hardware
2.48 62.9
2.50 63.5
R1.50 38.1
Example Part Part No. Example No. 708 1-0762-11.375 , - A -1762-11.3751' 1708
45° TYP.
rod part partnumbers numbers(2 (2 pcs.) pcs.) rod (see tubular tubular rod options below)
2.25 57.2
2.76 70.2
2.25 57.2
cam style base part part number includes: ● adjustable rod rod guide guide (2pcs.) (2pcs.) • 710 adjustable ● 760 5/16-18 shoulder bolt bolt(2pcs.) (2pcs.) •
.318 [8.08] SQ.
.80 20.3
.50 12.7
.320 [8.13] SQ. 5/8-18 THD. (2) PLACES
.189 4.80
Center Cam Cam Options Center Options Options Options
Part No. Part No.
1.05 [26.6]
Description Description
A A
700 700
.60 [15.2] .60 [15.2] offset offset center center cam cam
B B
700-01 700-01
.187 [4.75] cam .187 [4.75] offset offset center center cam
C C
701 701
D D
701-01 701-01
.134 3.40 .nats.ao]
762 762 ' 762SS 217' 76255
762-11.375 762-11.375
option B B option part no. no. 700-01 700-01 part
option A A option part no. no. 700 700 0" part
option D D 1- option part no. no. 701-01 701-01 part
option C C option part no. 701 part no. 701 2.69 68.4 2.88(09.41
.318 [8.08] .316 [609] SQ. 90.
Dimension A Dimension A
Dimension B B Dimension
Dimension C C Dimension
Material Material
18.83 18.83 [478.3] [4783]
6.00 [152.4] 6.00 [152.4]
3.00 3.00 [76.2] [76.2]
steel steel
18.83 18.83 [478.3] [4783]
6.00 [152.4] 6.00 [152.4]
3.00 3.00 [76.2] [76.2]
304 SS SS 304
11.38 [289.1] 1138 [289.1]
N/A N/A
N/A N/A
steel steel
12.88 12.88 [327.2] [327.2]
N/A N/A
N/A N/A
steel steel
762-12.937 762-12.937
12.94 12.94 [328.7] [328.7]
6.00 6.00
3.00 3.00
steel steel
762-15.75 762-15.75
15.75 15.75 [400.1] [400.1]
N/A N/A
N/A N/A
steel steel
762-7.875 762-7.875
7.88 7.88 [200.2] [200.2]
N/A N/A
N/A N/A
steel steel
765 765
33.83 33.83 [859.3] [8593]
6.00 [152.4] 6.00 [152.4]
6.00 [152.4] 6.00 [152.4]
steel steel
33.83 33.83 [859.3] [8593]
6.00 [152.4] 6.00 [152.4]
6.00 [152.4] 6.00 [152.4]
304SS 304SS
765-15.875 765-15.875
15.88 15.88 [403.4] [403.4]
N/A N/A
N/A N/A
steel steel
765-15.937 765-15.937
15.94 15.94 [404.9] [404.9]
6.00 [152.4] 6.00 [152.4]
6.00 [152.4] 6.00 [152.4]
steel steel
765-18.25 765-18.25
18.25 18.25 [463.6] [463.6]
6.00 [152.4] 6.00 [152.4]
6.00 [152.4] 6.00 [152.4]
steel steel
765-18.875 765-18.875
18.88 18.88 [479.6] [479.6]
N/A N/A
N/A N/A
steel steel
765-23.875 765-23.875
23.88 23.88 [606.6] [606.6]
N/A N/A
N/A N/A
steel steel
765-24.875 765-24.875
24.88 24.88 [632.0] [632.0]
6.00 [152.4] 6.00 [152.4]
6.00 [152.4] 6.00 [152.4]
steel steel
765-29.875 765-29.875
29.88 29.88 [759.0] [759.0]
N/A N/A
N/A N/A
steel steel
765-9.875 765-9.875
9.88 9.88 [251.0] [251.0]
N/A N/A
N/A N/A
steel steel
768 768
45.83 [1164.1] 45.83 [1164.1]
3.00 [76.2] 3.00 [76.2]
3.00 3.00 [76.2] [76.2]
steel steel
768SS-01 76855-01
45.83 [1164.1] 45.83 [1164.1]
3.00 [76.2] 3.00 [76.2]
3.00 3.00 [76.2] [76.2]
304SS 304SS
768-21.875 768-21.875
21.88 21.88 [555.8] [555.8]
N/A N/A
N/A N/A
steel steel
768-27.875 768-27.875
27.88 27.88 [708.2] [708.2]
N/A N/A
N/A N/A
steel steel
768-30.06 768-30.06
30.06 30.06 [763.5] [763.5]
N/A N/A
N/A N/A
steel steel
768-33.875 768-33.875
33.88 33.88 [860.6] [860.6]
N/A N/A
N/A N/A
steel steel
768-38.875 768-38.875
38.88 38.88 [987.6] [987.6]
N/A N/A
N/A N/A
steel steel
768-39.19 768-39.19
39.19 39.19 [995.4] [995.4]
N/A N/A
N/A N/A
steel steel
768-41.50 768-41.50
41.50 [1054.1] 41.50 [1054.1]
N/A N/A
N/A N/A
steel steel
768-41.875 768-41.875
41.88 [1063.8] 41.88 [1063.8]
N/A N/A
3.00 3.00
steel steel
768-44.375 768-44.375
44.38 [1127.3] 4438 [11273]
3.00 [76.2] 3.00 [76.2]
3.00 3.00 [76.2] [76.2]
steel steel
769 769
49.00 [1244.6] 49.00 [1244.6]
N/A N/A
N/A N/A
steel steel
768SS 76855
.60 15.2 .61[15.2]
5/16-18 THD. (2) PLACES
762-12.875 762-12.875
eV 765SS 76555
.19 [4.8]
adjustable nylon nylon roller roller center center cam cam adjustable adjustable nylon center cam collar adjustable nylon roller roller center cam with with weld weld collar Tubular Rod Tubular Rod Options Options
Part No. Part No.
ChMYI0
5/16-18 UNC THD. (2) PLACES
NEMA & JIC
Three Point Point Cabinet Cabinet Latches Latches with Tubular Rods Rods Three with Tubular Build Your Build Your Own Own Cabinet Cabinet Latch Latch Kit Kit
no holes holes no 46.21 [1173.7] 46.21 [1173.7]total total center center to to end end rod rod length length
.318 [8.08] .316 is.cei SQ. 90.
2.31 58.7
.67 17.0
3.12 79.4 3.12 79.4
2.31 58.7
.67 17.0
.75 19.1
.47 12.0
5/16-18 THD. (2) PLACES
2.69 68.4 1.12 28.6
.47 11.9 .41111S] 1.09 27.7 MAX 1.08127.71DM% .52 13.2 MIN. .52[19.2] NH.
.120 3.05
.52 13.2 .541921
1.09 27.7 1..12,71
N.
MAX
MAX
.120 3.05 .12*.os]
.990 25.15 .406 10.32 0 .4O6[ 10.32 ] (3) HOLES HOLES (3)
.32 8.2
B
A
.63 15.9 .63[15.9] 9.5 .38 38[9.51 .047 1.20 .047[1.201
A
A
C
SECTION A-A SECTION A-A
.38 9.5 .38[9.5]
304SS 304SS
easy installation installation I easy nylonrollers rollers for for smooth smooth operation operation I nylon rodscan canbe be made made to to custom custom lengths lengths and and hole hole patterns patterns if I rods if order order volume is is sufficient volume sufficient steelrods rods finish: finish: zinc zinc plated 304SS ► 304SS rods rods finish: finish: mill mill I steel plated Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 MN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
183 183
1Ko NEMA & JIC 014 LT4 1111:1
''TERRA PACIFIC
ENGINEr- AND PRODUCTS
Three Point Three Point Cabinet Cabinet Latches Latches with with Channel Channel Rods Rods Features Features madeof of strong strong lightweight lightweight channel channel steel steel rodsmade I rods rodscan can be be made madeto tospecial special lengths lengths or or different different hole I rods hole patterns patterns if if volume volume is is sufficient sufficient all components componentsare aremade madeof ofsteel steelwith with aa clear clear zinc zinc plated I all plated finish and finish and can can be be purchased purchased separately separately seehandle handleselection selection on on pages pages 28-45 28-45 I see
AdjustableCenter CenterCam Cam Kits Kits Adjustable part includes (2) (2) 36.00 [914.4] rods part number number 7070 7070 includes 36.00 [914.4] rods part includes (2) (2) 47.44 rods part number number 7071 7071 includes 47.44 [1205.0] [1205.0] rods Item Item
Part Part No. No.
Description Description
Qty. Qty.
11
701 701
adjustable nylon roller roller center cam adjustable nylon center cam
11
2 2
702 702
rod rod guide guide bracket bracket
2 2
3 3
703 703
5/16-18 xx .87 5/16-18 .87 [22.1] [22.1]long longshoulder shoulder bolt bolt
2 2
Dimension A Dimension A channel rod channel rod length length
Adjustable Center Center Cam Cam Adjustable part 701 part no. no. 701
center center cam cam options options
AdjustableCenter CenterCam Cam Kits Kits with Collar Adjustable with Collar
fixed center fixed center cam cam shown shown
1
part includes (2) (2) 36.00 [914.4] rods part number number 7073 7073 includes 36.00 [914.4] rods part includes (2) (2) 47.44 [1205.0] rods rods part number number 7074 7074 includes 47.44 [1205.0]
3
Item Item
Part Part No. No.
Description Description
Qty. Qty.
11
701-01 701-01
adjustable center center cam cam with with collar collar adjustable
11
2 2
702 702
rod rod guide guide bracket bracket
2 2
3 3
703 703
5/16-18 xx .87 5/16-18 .87 [22.1] [22.1]long longshoulder shoulder bolt bolt
2 2
6.00 [152.4] 6.00 [152.4]
rod rod options options
Adjustable Center Center Cam Cam with with Collar Collar Adjustable part 701-01 part no. no. 701-01
Al:A A A
2
Fixed Center Cam Cam Kits Kits Fixed Center part includes (2) (2) 36.00 [914.4] rods part number number 7075 7075 includes 36.00 [914.4] rods part includes (2) (2) 47.44 [1205.0] rods rods part number number 7076 7076 includes 47.44 [1205.0] Item Item
Part Part No. No.
Description Description
Qty. Qty.
11
700 700
fixed center fixed center cam cam
11
2 2
702 702
rod rod guide guide bracket bracket
2 2
3 3
703 703
5/16-18 xx .87 5/16-18 .87 [22.1] [22.1]long longshoulder shoulder bolt bolt
2 2
Fixed Center Cam Cam Fixed Center part part no. no. 700 700
184
Request Info
Download =)DmoDEts @ @www.spep.com www.spep.com Download
see pg. 186 186 for see pg. for details details
Section A A-A Section A channel rod rod cross-section cross-section channel
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Industrial Hardware Hardware Hinge
2.48 62.99] 2 48[02 R1.50 38.1
ExamplePart Part No. No. 707 --AA--704-36.00 1707 704-36.00 HO. Example rod part partnumbers numbers(2 (2 pcs.) pcs.) rod (see channel below) (see channel rod rod options options below)
2.50 63.5
45° TYP.
2.25 57.2 225157.2]
2.76 70.2 2.76(70.2]
2.25 57.2
110-cam cam style style base part part number number includes: includes: )0. base
.318 [8.08] SQ. .31818.081 SQ.
● bracket (2pcs.) (2pcs.) • 702 702 rod rod guide guide bracket ● bolt (2pcs.) (2pcs.) • 703 703 5/16-18 5/16-18 shoulder shoulder bolt
.50 12.7 .50[12.7
.80 20.3
.320 [8.13] SQ. 5/8-18 THD. (2) PLACES
.189 4.80
1.05 [26.6]
Center Center Cam Cam Options Options Options Part Part No. No. Options
.134 3.40 .134[3.40]
Description Description
A A
700 700
.60 [15.2] .60 [15.2] offset offset center center cam cam
BB
700-01 700-01
.187 [4.75] .187 [4.75] offset offset center center cam cam
C C
701 701
adjustable nylon roller roller center cam adjustable nylon center cam
D D
701-01 701-01
adjustable nylon roller roller center cam adjustable nylon center cam with weld weld collar collar with
Channel Rod Channel Rod Options Options Part Part No. No.
Dimension A Dimension A
ChMYI0
5/16-18 UNC UNC 2110. THD. 5/10-18 (2) PLACES (2) PUCE'S
NEMA & JIC
Three Point Three Point Cabinet Cabinet Latches Latches with with Channel Channel Rods Rods Build Latch Kit Kit Build Your Your Own Own Cabinet Cabinet Latch
.19 [4.8]
.60 15.2 .00[15.2]
option A A option part no. 700 part no. 700
option B part no. 700-01 700-01 part no.
option D D option part no. 701-01 701-01 part no.
option C C option part no. 701 701 part no. 2.69 68.4 2.68[115.4]
5/16-18 THD. (2) PLACES .318 18.8160. [8.08] SQ.
,6
704* 704*
36.00 [914.4] 36.00 [914.4]
704-24.20* 704-24.20*
24.20 [614.9] 24.20 [614.9]
705* 705*
47.44 [1205.0] [1205.0] 47.44
705-01* 705-01*
37.08 [941.8] 37.08 [941.8]
705-02* 705-02*
41.70 [1059.2] [1059.2] 41.70
705-05 705-05
9.88 9.88 [251.0] [251.0]
705-06 705-06
12.88 [327.2] 12.88 [327.2]
705-07 705-07
15.88 [403.4] 15.88 [403.4]
705-08 705-08
18.88 [479.6] 18.88 [479.6]
705-09 705-09
22.00 [558.8] 22.00 [558.8]
705-10 705-10
21.88 [555.8] 21.88 [555.8]
705-11 705-11
18.25 [463.6] 18.25 [463.6]
705-12 705-12
24.88 [632.0] 24.88 [632.0]
705-13 705-13
27.50 [698.5] 27.50 [698.5]
705-14 705-14
27.88 [708.2] 27.88 [708.2]
705-15 705-15
33.50 [850.9] 33.50 [850.9]
705-16 705-16
33.88 [860.6] 33.88 [860.6]
705-17 705-17
45.50 [1155.7] [1155.7] 45.50
705-18 705-18
38.72 [983.5] 38.72 [983.5]
705-22 705-22
23.88 [606.6] 23.88 [606.6]
705-23 705-23
11.38 [289.1] 1138 [289.1]
705-24 705-24
12.94 [328.7] 12.94 [328.7]
705-25 705-25
15.94 [404.9] 15.94 [404.9]
705-26 705-26
7.88 7.88 [200.2] [200.2]
705-27 705-27
38.88 [987.6] 38.88 [987.6]
705-28 705-28
29.88 [759.0] 29.88 [759.0]
.318 p.m] [8.08] SO. SQ.
2.31 58.7
.67 17.0
3.12 79.4 3.12 79.4
2.31 58.7
.67 17.0
.75 19.1
.47 12.0
5/16-18 THD. (2) PLACES
2.69 68.4 1.12 28.6
.47 11.9 1.09 27.7 DA. MAX 1.02[ .52 13.2 MIN. .52[19.2j NH.
1.09 27.7 00[2221
.120 3.05
MAX 13.2 .52 52119.21 L.X MAX
.120 3.05
1.250 31.75
SECOND SECOND MOUNTING MOUNTING HOLE HOLE .19 4.7
A
.63 15.9 .63[15.9]x{I
n
6.00 152.4 6.00[152.4]
.56 14.3 .56[14.3]
.059 1.50 .059] 1.50]-+-
A
t
A
SECTION A-A SECTION A-A
L
.56 14.3 .56[14.3]
.406 10.32 0.406[10 32] HOLE HOLE
►** these these parts parts have have second second mounting mounting hole hole easy installation ►easy installation plastic rollers ►high high impact impact plastic rollers for forsmooth smooth operation operation of strong lightweight channel channel steel steel with with aa clear clear ►made made of strong lightweight zinc plated finish zinc plated finish ►rods rods can can be be made made to to custom custom lengths lengths and and hole hole patterns patterns if order is sufficient if order volume volume is sufficient Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 MN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
185 185
1Ko NEMA & JIC 014 LT4 1111:1
''‘EP" 11 PACIFIC
ENGINEERING AND PRODUCTS
Fixed Fixed Rod Rod Guide Guide Part Part Number Number 1.25 31.8 1-41.25[91.8]
Material Material
Finish Finish
steel steel
zinc plated zinc plated
702 702
.203 5.16 0203[5.16]
(2) HOLES
usewith with tubular tubular rods rods on on pg. pg. 183 183 I use
.50 12.7 .50[12.7]
.63 15.9 .69[15.9] TOP VIEW TOP VIEW 1.28 32.5 1.28[92.5] .69 17.5
.102 2.60 .102[2.60]
.60 15.2
6.8 .27 27[6.8]
1.69 42.9 1.69[42.9]
FRONT VIEW FRONT VIEW
RIGHT SIDE RIGHT SIDE VIEW VIEW
Fixed Fixed Rod Rod Guide Guide Part Part Number Number
1.25 31.8 1.25[31.8]
.312 7.93 0.312[7.93]
Material Material
Finish Finish
steel steel
zinc plated zinc plated
702-01 702-01
(2) HOLES
usewith with tubular tubular rods rods on on pg. pg. 187 183 I use .94 23.8
.25 6.4 .25[6.4]
.62 15.9 VIEW TOP VIEW 1.44 36.5 1.44[36.5] .81 20.7
.102 2.60 102[2.60]
.44 11.1
.15 3.9 .15[3.9]
1.41 35.7 1.41[35.7]
FRONT VIEW FRONT VIEW
RIGHT SIDE RIGHT SIDE VIEW VIEW
Adjustable Rod Rod Guide Adjustable Guide .25 6.4 025[6.4]
.50 12.7 .50[12.7]
.198 5.03 0.198[5.03] (2) HOLES
1.13 28.6 1.13[28.8]
1.75 44.5 1.75[44.5]
PIN & E-CLIP PIN 8 E-CLIP
TOP VIEW TOP/IEW
.261 6.63 (4) HOLES
.38 9.5 TYP. .25 6.4
.095 2.41 .095[2.41]-1
1.31 33.3 1.31[33.3]
.06 1.6 TYP.
Part Part Number Number
Material Material
Finish Finish
710 710
steel steel
zinc plated zinc plated
710SS 71055
304SS 304SS
passivated passivated
710A 710A
aluminum guide & & aluminum guide 304SS pin 304SS pin
tumbled tumbled
steel steel
mill & zinc mill guide guide & zinc plated pin plated pin
711 711
usewith with tubular tubular rods rods on on pg. pg. 183 183 I use 1.83 46.4 1.83[46.4]
1.31 33.4 .74 18.8 .74[18.8]
.75 19.1 .75[19.1
41.31 . 3 ] •- 11.63 .83[4
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW
Shoulder Bolts for for Center Center Cams Cams Shoulder Bolts Part Part Number Number
-
.064 1.63 WIDE WIDE x x .064[1.63] .064 [1.63] [1.63] DEEP DEEP SLOT .064 SLOT
LENGTH LENGTH
kttU PmElgOi I.
186 186
Download -7)DmoDELs@@www.spep.com www.spep.com Download
5/16-18 5/16-18 THREAD THREAD
12.70 500[12 .70] ..500 TYP. TYP.
Length Length
Material Material
Finish Finish
703 703
.594 [15.09] [15.09] .594
steel steel
zinc plated zinc plated
760 760
.391 [9.93] 391 [9.93]
steel steel
zinc plated zinc plated
760SS 76055
.391 [9.93] 391 [9.93]
304SS 304SS
tumbled tumbled
part no. no. 703 185 I part 703 is is used used on on channel channel rods rods on on page page 185 part no. no. 760 & 760SS rods on I part 760 & 76055 are are used used on on tubular tubular rods on page 183 page 183
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware Hardware Hinges ind Industrial
Finish Finish
steel steel
zinc plated zinc plated
R1.50 38.1
2.50 63.5
Alv
45° TYP.
refer to to previous previous page page for for shoulder I refer shoulder bolt bolt for use use with with handles handlesthat thathave haveaa.313" .313" sq. sq. shaft I for shaft
2.25 57.2
.80 20.3
.320 [8.13] SQ.
w
5/8-18 THD. (2) PLACES
.189 4.80
.19 [4.8]
AO'
ChMYI0
700-01 700-01
Material Material
NEMA & JIC
Offset Center Center Cam Cam Offset Part Part Number Number
Offset Center Center Cams Cams Offset Part Part Number Number
700 700 700-03 700-03
Material Material
Finish Finish
A A
B
C
steel steel
zinc zinc plated plated
2.48 2.48 [63.0] [63.0]
.60 .60 [15.2] [15.2]
1.05 1.05 [26.7] [26.7]
steel steel
zinc zinc plated plated
2.65 2.65 [67.3] [67.3]
.50 .50 [12.7] [12.7]
.97 .97 [24.6] [24.6]
5/16-18 UNC THD. (2) PLACES
A
2.76 70.2
2.25 57.2
.318 [8.08] SQ .50 12.7
refer to to previous previous page page for for shoulder I refer shoulder bolt bolt for use use with with handles handlesthat thathave haveaa.313" .313" sq. sq. shaft I for shaft C
A_
B
.134 3.40 .194[3.4011
Offset Center Center Cam Cam with Collar Offset with Collar Part Part Number Number
700-02 700-02
Material Material
Finish Finish
steel steel
zinc plated zinc plated
5/16-18 UNC THD. (2) PLACES
refer to to previous previous page page for for shoulder I refer shoulder bolt bolt for use use with with handles handlesthat thathave haveaa.313" .313" sq. sq. shaft I for shaft
2.48 62.9
2.76 70.2
.75 19.1
2.25 57.2
.318 [8.08] SQ .50 12.7
.47 11.9 1.04 26.4
'.°74]
.47 12.0
J
1 11
.134 3.40 .19419.401i
Adjustable Center Center Cam Cam Adjustable Part Part Number Number
Material Material
Finish Finish
701 701
steel steel
zinc plated zinc plated
701SS 70155
304SS 304SS
mill mill
refer to to previous previous page page for for shoulder I refer shoulder bolt bolt for use use with with handles handlesthat thathave haveaa.313" .313" sq. sq. shaft I for shaft
5/16-18 THD. 511•1611113. (2) PLACES (2)PIACES .318 8.08 SQ. .slogeos]sa.
.67 17.0
2.31 58.7
3.12 79.4
•
.47 12.0
2.69 68.4 2so[ea.a]
1.09 27.7 juas MAX. tooln.
.120 3.05 .52 13.2 MIN. m[114.1.
Adjustable Center Center Cam Cam with with Collar Collar Adjustable Part Part Number Number
701-01 701-01
Material Material
Finish Finish
steel steel
zinc plated zinc plated
refer to to previous previous page page for for shoulder I refer shoulder bolt bolt for use use with with handles handlesthat thathave haveaa5/16 5/16[8.00] [8.00] sq. sq. shaft I for shaft
5/16-18 THD. (2) PLACES .318 [8.08] SQ.
2.31 58.7
.67 17.0
3.12 79.4
.75 19.1
.47 12.0
2.69 68.4
.47 11.9 1.09 27.7 MAX tooln.7]..uoc .52 13.2 MIN. .120 3.05
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
187 187
1Ko NEMA & JIC 014 LT4 1111:1
SIERRA '34CIFIC ENGINE,- AND ,--- rIUCTS NEMA NEMAClip ClipAssembly Assembly Kits Kitswith with Standard Standard Bracket Bracket
31655
Kit Bracket Kit Part PartNo. No.14SS 1455--1/4-20 1/4-20 Stainless Stainless Steel Steel Bracket Features Features
Item Item
all parts partsmeet meetNEMA NEMA 12 I all 12enclosure enclosure access access requirements requirements all sub-components sub-components may may be be purchased purchased separately separately I all
Part Part Number Number
Qty. Qty.
Description Description
11
X1401 X1401
11
304SS standard 304SS standard bracket bracket
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D. washer, washer, 316SS 316SS
4 4
X1404-03 X1404-03
11
1/4-20 x .75 bolt, 316SS 316SS 1/4-20 x .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
Kit Bracket KitPart PartNo. No.14SS01 145501 --1/4-28 1/4-28 Stainless Stainless Steel Steel Bracket Item PartNumber Number Item Part
Qty. Qty.
Description Description
11
X1401 X1401
11
304SS standard 304SS standard bracket bracket
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D.washer, washer, 316SS 316SS
4 4
X1405-03 X1405-03
11
1/4-28 xx .75 bolt, 316SS 316SS 1/4-28 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
Kit Kit Part PartNo. No.14ZN 14ZN--1/4-20 1/4-20 Steel Steel Bracket Bracket Item Part Number Number Qty. Qty. Item Part
4
11
X1400 X1400
11
Description Description zinc plated zinc plated standard standard bracket bracket
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D. washer, washer, 316SS 316SS
4 4
X1404-03 X1404-03
11
1/4-20 x .75 bolt, 316SS 316SS 1/4-20 x .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
Kit Kit Part PartNo. No.14ZN01 14ZNO1- -1/4-28 1/4-28 Steel Steel Bracket Bracket 1 see NEMA NEMA Hold-Down see Hold-Down Clamp Clamp below below for for dimensional dimensional data data
Item PartNumber Number Item Part
Qty. Qty.
Description Description
11
X1400 X1400
11
zinc plated zinc plated standard standard bracket bracket
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D.washer, washer, 316SS 316SS
4 4
X1405-03 X1405-03
11
1/4-28 xx .75 bolt, 316SS 316SS 1/4-28 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
3
Kit Bracket Kit Part PartNo. No.14SST 145ST- -1/4-20 1/4-20Stainless Stainless Steel Steel Bracket Item Item
2
Part Part Number Number
Qty. Qty.
Description Description
11
X1400-03 X1400-03
11
316SS 316SS standard standard bracket bracket
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] .63 [15.9] O.D 0.D washer, washer, 316SS 316SS
4 4
X1404-03 X1404-03
11
1/4-20 xx .75 bolt, 316SS 316SS 1/4-20 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
Kit Bracket Kit Part PartNo. No.14SST01 1455T01--1/4-28 1/4-28 Stainless Stainless Steel Steel Bracket Item Item 11
2 2 3 3 4 4
Part Part Number Number
Qty. Qty.
Description Description
X1400-03 X1400-03
11
304SS standard 304SS standard bracket bracket
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D .63 O.D washer, washer, 316SS 316SS
X1405-03 X1405-03
11
1/4-28 xx .75 bolt, 316SS 316SS 1/4-28 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
NEMA NEMAHold-down Hold-down Clamp Clamp Part Part Number Number 1.25 31.8 1.25[31.
.26 [6.6] xx .75 [19.1] .26 [6.6] .75 [19.1] SLOT CENTERED CENTERED SLOT
11.9 .47 .47[11.9]
Material Material
Finish Finish
Material Material Thickness Thickness
X1400 X1400
steel steel
zinc plated zinc plated
.098 [2.49] [2.49] .098
X1401 X1401
304SS 304SS
tumbled tumbled
.098 [2.49] [2.49] .098
X1400-03 X1400-03
316SS 316SS
tumbled tumbled
.098 [2.49] [2.49] .098
1.20 30.4 1.20[30.4
188
Download =)Dmobus @ www.spep.com Download @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware Hinge industrial Hardware
Item Item
Part Part Number Number
Qty. Qty.
Description Description
Features Features
11
1490SS 149055
11
304SS clamp 304SS clamp bracket bracket
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D. washer, washer, 316SS 316SS
4 4
X1404-03 X1404-03
11
1/4-20xx.75 .75 [19.1] [19.1] long hex bolt, bolt, 316SS 316SS 1/420 long slotted slotted hex
►all NEMA 44enclosure all parts parts meet meet NEMA enclosureaccess accessrequirements requirements ►all all sub-components sub-components may may be be purchased purchased separately separately
ChMYI0
NEMA NEMAClip ClipAssembly Assembly Kits Kits with with Clamp Clamp Bracket Bracket
Kit Clamp Kit Part PartNo. No.1491SS 149155 --1/4-20 1/4-20 Stainless Stainless Steel Steel Clamp
NEMA & JIC
31655
Kit Steel Clamp Clamp KitPart PartNo. No.1491SS01 14915501 --1/4-28 1/4-28 Stainless Stainless Steel Item Item
Qty. Qty.
Description Description
11
1490SS 149055
Part Part Number Number
11
304SS clamp 304SS clamp bracket bracket
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D. washer, washer, 316SS 316SS
4 4
X1405-03 X1405-03
11
1/4-28xx.75 .75 [19.1] [19.1] long hex bolt, bolt, 316SS 316SS 1/428 long slotted slotted hex
Kit Clamp Kit Part PartNo. No.1491ZN 1491ZN--1/4-20 1/4-20 Steel Steel Clamp Item Item
Qty. Qty.
Description Description
11
1490ZN 1490ZN
Part Part Number Number
11
zinc plated zinc plated clamp clamp bracket bracket
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D. washer, washer, 316SS 316SS
4 4
X1404-03 X1404-03
11
1/4-20xx.75 .75 [19.1] [19.1] long hex bolt, bolt, 316SS 316SS 1/420 long slotted slotted hex
4
O
Kit Clamp Kit Part PartNo. No.1491ZN01 1491ZN01 --1/4-28 1/4-28 Steel Steel Clamp Item Item
Part Part Number Number
Qty. Qty.
Description Description
11
1490ZN 1490ZN
11
zinc plated zinc plated clamp clamp bracket bracket
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D. washer, washer, 316SS 316SS
4 4
X1405-03 X1405-03
11
1/4-28xx.75 .75 [19.1] [19.1] long hex bolt, bolt, 316SS 316SS 1/428 long slotted slotted hex
Kit Clamp KitPart PartNo. No.1491SS04 14915504 -- 1/4-28 1/4-28 316SS 31655 Clamp Item Item
Part Part Number Number
Qty. Qty.
Description Description
1 see NEMA NEMA Hold-Down see Hold-Down Clamp Clamp below below for for dimensional dimensional data data
3
11
1490SS01 14905501
11
clamp bracket, 316SS 316SS clamp bracket,
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D. washer, washer, 316SS 316SS
4 4
X1405-03 X1405-03
11
1/4-28xx.75 .75 [19.1] [19.1] long hex bolt, bolt, 316SS 316SS 1/428 long slotted slotted hex
2
O
NEMA NEMAHold-down Hold-down Clamp Clamp Part Part Number Number
Material Material
Finish Finish
Material Material Thickness Thickness
1490ZN 1490ZN
steel steel
zinc plated zinc plated
.095 [2.41] [2.41] .095
1490SS 149055
304SS 304SS
tumbled tumbled
.095 [2.41] [2.41] .095
1490SS01 14905501
316SS 316SS
tumbled tumbled
.095 [2.41] [2.41] .095 1.25 31.8 1.25[31.8]
1.10 27.9 1.10[27.9]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.28 [7.1] xx .66 .66 [16.8] SLOT CENTERED CENTERED SLOT
.85 21.6 .85[21.6]
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
189
1Ko NEMA & JIC 014 LT4 1111:1
SIERRA '34CIFIC ENGINEr- AND ,--- nucTs
NEMA NEMAClip ClipAssembly Assembly Kits Kitswith with Hook Hook Bracket Bracket
316SS
Kit 1/4-20 Stainless Steel Clamp Clamp KitPart PartNo. No.1492SS 149255--1/4-20 Stainless Steel Item Item
Features Features all parts partsmeet meetNEMA NEMA 44enclosure I all enclosure access access requirements requirements all sub-components sub-components may may be be purchased purchased separately separately I all
Part Part Number Number
Qty. Qty.
Description Description
1 1
X1407SS X140755
11
clamp bracket bracket-- 304SS, 304SS, tumbled, .095 [2.41] [2.41] thick clamp tumbled, .095 thick
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D.washer, washer, 316SS 316SS
4 4
X1404-03 X1404-03
11
1/4-20 xx .75 bolt, 316SS 316SS 1/4-20 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
Kit KitPart PartNo. No.1492SS01 14925501 --1/4-28 1/4-28 Stainless Stainless Steel Steel Clamp Clamp Item Item
Part Part Number Number
Qty. Qty.
Description Description
1 1
X1407SS X140755
11
clamp bracket bracket-- 304SS, 304SS, tumbled, .095 [2.41] [2.41] thick clamp tumbled, .095 thick
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. washer, 316SS 316SS .63 O.D. washer,
4 4
X1405-03 X1405-03
11
1/4-28 xx .75 bolt, 316SS 316SS 1/4-28 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
Kit Clamp Kit Part PartNo. No.1492ZN 1492ZN--1/4-20 1/4-20 Steel Steel Clamp Item Item
4
1 xi) see NEMA NEMA Hold-Down see Hold-Down Clamp Clamp below below for for dimensional dimensional data data
3
Qty. Qty.
Description Description
1 1
X1407ZN X1407ZN
Part Part Number Number
11
clamp bracket -- steel, steel, zinc zinc plated, plated,.095 .095 [2.41] [2.41] thick clamp bracket thick
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D. washer, washer, 316SS 316SS
4 4
X1404-03 X1404-03
11
1/4-20 xx .75 bolt, 316SS 316SS 1/4-20 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
Kit Kit Part PartNo. No.1492ZN01 1492ZNO1--1/4-28 1/4-28 Steel Steel Clamp Clamp Item Item 1 1 2 2 3 3 4 4
Part Part Number Number
Qty. Qty.
Description Description
X1407ZN X1407ZN
11
clamp bracket -- steel, steel, zinc zinc plated, plated,.095 .095 [2.41] [2.41] thick clamp bracket thick
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D. washer, washer, 316SS 316SS
X1405-03 X1405-03
11
1/4-28 xx .75 bolt, 316SS 316SS 1/4-28 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
O
Kit Clamp KitPart PartNo. No.1492SS05 14925505 -- 1/4-20 1/4-20 316SS 31655 Clamp
2
O
Item Item
Part Part Number Number
Qty. Qty.
Description Description
1 1
X1407SS01 X14075501
11
clamp bracket bracket-- 316SS, 316SS, tumbled, .095 [2.41] [2.41] thick clamp tumbled, .095 thick
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D.washer, washer, 316SS 316SS
4 4
X1404-03 X1404-03
11
1/4-20 xx .75 bolt, 316SS 316SS 1/4-20 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
1.10[27.9] 1.10 27.9
.70 [17.8] xx .29 [7.4] .70 [17.8] .29 [7.4] CENTERED SLOT SLOT CENTERED
Kit KitPart PartNo. No.1492SS04 14925504 -- 1/4-28 1/4-28 316SS 31655 Clamp Clamp
.74 18.8 .74[18.8]
Item Item
Part Part Number Number
Qty. Qty.
Description Description
1 1
X1407SS01 X14075501
11
clamp bracket bracket-- 316SS, 316SS, tumbled, .095 [2.41] [2.41] thick clamp tumbled, .095 thick
2 2
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
3 3
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D.washer, washer, 316SS 316SS
4 4
X1405-03 X1405-03
11
1/4-28 xx .75 bolt, 316SS 316SS 1/4-28 .75 [19.1] [19.1]long long slotted slotted hex hex bolt,
.98 24.9 .98[24.9]
Clamp Bracket Clamp Bracket Details Details
190 190
Download .7)Dmobus @ www.spep.com Download @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges and Industrial Industr ►-► Hardµ•---
Kit Lever Kit Part PartNo. No.15ZN 15ZN--1/4-28 1/4-28 Steel Steel Lever Part Qty. PartNumber Number Qty.
Features Features
Description Description
1450ZN 1450ZN
11
1/4-28 lever lever clamp, 1/4-28 clamp, steel steel
1490ZN 1490ZN
11
hold-down clamp, steel hold-down clamp, steel
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D.washer, washer, 316SS 316SS
X1406-01 X1406-01
11
.50 [12.7] [12.7] O.D. .50 O.D.washer, washer, 316SS 316SS
all parts NEMA 12 ►all parts meet meet NEMA 12enclosure enclosureaccess accessrequirements requirements all sub-components may be ►all sub-components may be purchased purchased separately separately
NEMA & JIC
NEMA Kits NEMALever LeverClamp ClampAssembly Assembly Kits
316SS
Kit Lever Kit Part PartNo. No.15SS 1555--1/4-28 1/4-28 Stainless Stainless Steel Steel Lever Part Part Number Number
Qty. Qty.
Description Description
1450SS 145055
11
1/4-28 lever lever clamp, clamp, 304SS 304SS 1/4-28
1490SS 149055
11
hold-down clamp, 304SS 304SS hold-down clamp,
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D.washer, washer, 316SS 316SS
X1406-01 X1406-01
11
.50 [12.7] [12.7] O.D. .50 O.D.washer, washer, 316SS 316SS
Kit Lever Kit Part PartNo. No.15SS01 155501 --1/4-20 1/4-20 Stainless Stainless Steel Steel Lever Part Part Number Number
114
I 4
Qty. Qty.
Description Description
1451SS 145155
11
1/4-20 lever lever clamp, clamp, 304SS 304SS 1/4-20
1490SS 149055
11
hold-down clamp, 304SS 304SS hold-down clamp,
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D.washer, washer, 316SS 316SS
X1406-01 X1406-01
11
.50 [12.7] [12.7] O.D. .50 O.D.washer, washer, 316SS 316SS
part X1403-01 part no. no. X1403-01
Kit Lever Kit Part PartNo. No.15SS02 155502 --1/4-28 1/4-28 316SS 31655 Lever Part Part Number Number
Qty. Qty.
Description Description
1450SS-02 145055-02
11
1/4-28 lever lever clamp, clamp, 316SS 316SS 1/4-28
1490SS01 14905501
11
hold-down clamp, 316SS 316SS hold-down clamp,
X1402-01 X1402-01
11
spring, 316SS 316SS spring,
X1403-01 X1403-01
11
.63 [15.9] [15.9] O.D. .63 O.D.washer, washer, 316SS 316SS
X1406-01 X1406-01
11
.50 [12.7] [12.7] O.D. .50 O.D.washer, washer, 316SS 316SS
part X1406-01 part no. no. X1406-01
part X1402 part no. no. X1402
NEMA NEMALever Lever Clamp Clamp Material. Material.
Finish Finish
Thread Thread
Material Material Thickness Thickness
1450ZN 1450ZN
steel steel
zinc plated zinc plated
1/4-28 1/4-28
.074 [1.88] [1.88] .074
1450SS 145055
304SS 304SS
mill mill
1/4-28 1/4-28
.074 [1.88] [1.88] .074
1451SS 145155
304SS 304SS
mill mill
1/4-20 1/4-20
.074 [1.88] [1.88] .074
1450SS-02 145055-02
316SS 316SS
mill mill
1/4-28 1/4-28
.074 [1.88] [1.88] .074
Part Part Number Number
1.75 44.5 1.75[44.5]
.56 14.1 .56[14.1]
.70 17.7 .70[17.7]
.81 20.7 .81[20.7]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1/4-28 THD. THD. 1/4-28 OR 1/4-20 THD. THD. OR 1/4-20
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
191 191
1Ko NEMA & JIC 014 LT4 1111:1
SIEP"1 PACIFIC
EM -'"' -EKING AND ,---nucTs
Free-Standing Free-Standing Panel Panel Support Support Assembly Assembly -a.
Part Part Number Number
1.40 [35.6] 1.40 [35.6]
Item Item
Qty. Qty.
11
11
panel panel support support
2 2
11
standoff panel standoff panel support support
7
2.00 [50.8] [50.8] 2.00 3.75 [95.3] 3.75 [95.3]
1497ZN 1497ZN
3
1
.688 [17.48] [17.48] xx .400 .688 .400 [10.16] [10.16] (2) (2) places places
.500 [12.70] [12.70] xx .375 [9.53] .500 .375 [9.53] obround obround
1.75 [44.5] [44.5] 1.75
.40 [10.2] [10.2] .40
3 3
11
3/8-16 xx 1.75 3/8-16 1.75 [44.5] [44.5]long long carriage carriage bolt bolt
4 4
11
5/16-18 x 1.00 5/16-18 x 1.00 [25.4] [25.4]long longhex hex head head screw screw
5 5
11
.31 [7.9] .31 [7.9] flat flat washer washer
6 6
11
.31 [7.9] lock 31 [7.9] lock washer washer
77
11
5/16-18 5/16-18 clamping clamping nut nut
8 8
11
3/8-16 hex 3/8-16 hex nut nut
9 9
11
.38 [9.5] .38 [9.5] flat flat washer washer
material: steel steel I material: finish: yellow yellow zinc I finish: zinc plated plated shipped unassembled unassembled and and polybagged polybagged I shipped
2
1.44 [36.6] [36.6] 1.44
Description Description
9 8
5 6
4
'3*( Icc)
Padlock Padlock Hasp Hasp and and Staple Staple Set Set Kit Kit Part PartNo. No.1801 1801 -- Steel Steel Part Qty. PartNumber Number Qty. 2.13 54.1 2.13[54.1]
180 180
11
steel, tumbled, .102 [2.59] [2.59] thick steel, tumbled, .102 thick padlock padlock hasp hasp
181 181
11
steel, mill mill finish, steel, finish, .074 .074 [1.88] [1.88]thick thickpadlock padlock staple staple
Kit Kit Part PartNo. No.1801SS 180155 --Stainless Stainless Steel Steel
.51 13.0 51[13.0] x 1.69[42.9] [42.9] .27 6.8 x1.69 27[6.8] OBROUND OBROUND
.82 20.8 .82[20.8]
Description Description
Part Part Number Number
Qty. Qty.
Description Description
180SS 18055
11
304SS, tumbled, 304SS, tumbled, .102 .102 [2.59] [2.59]thick thickpadlock padlock hasp hasp
18101SS 1810155
11
304SS, tumbled, 304SS, tumbled, .074 .074 [1.88] [1.88] thick thickpadlock padlock staple staple
Kit KitPart PartNo. No.1801SS-01 180155-01 -- 316SS 31655 Qty. Qty.
Description Description
1.25 31.8
180SS-01 18055-01
Part Part Number Number
11
316SS, tumbled, 316SS, tumbled, .102 .102 [2.59] [2.59]thick thickpadlock padlock hasp hasp
.94 23.8
18101SS-01 1810155-01
11
316SS, tumbled, 316SS, tumbled, .074 .074 [1.88] [1.88] thick thickpadlock padlock staple staple
1.06 26.8
Kit Kit Part Part No. No. 1801A 1801A -- Aluminum Aluminum
.68 17.2 .47 11.9 .125 3.18 HOLE
Part Qty. PartNumber Number Qty.
Description Description
180A 180A
11
aluminum, tumbled, tumbled, .102 .102 [2.59] [2.59] thick aluminum, thick padlock padlock hasp hasp
181A 181A
11
aluminum, tumbled, tumbled, .074 .074 [1.88] [1.88] thick aluminum, thick padlock padlock staple staple
kit parts parts can can be be purchased purchased separately separately I kit
Mounting Mounting Foot Foot Part Part Number Number 2.52 63.9 1.281 32.54
.609 15.47 1.00 25.4
2.00 50.8
Material Material
Finish Finish
Material Material Thickness Thickness
183 183
steel steel
mill mill
.189 [4.80] [4.80] .189
18301SS 1830155
304SS 304SS
mill mill
.135 [3.43] [3.43] .135
18301SS-01 1830155-01
316SS 316SS
mill mill
.118 [3.00] [3.00] .118
aluminum aluminum
mill mill
.197 [5.00] [5.00] .197
183A 183A
.784 19.91 .430 10.92 HOLE
192
Download =)DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hingesand andIndustrial Industrial Hardware Hardware Hines
Finish Finish
Thread Thread
187 187
steel steel
mill mill
1/4-28 1/428
.090 .090
18701SS 1870155
304SS 304SS
mill mill
1/4-28 1/428
.090 .090
18701SST 187015ST
316SS 316SS
mill mill
1/4-28 1/428
.090 .090
1.25 31.8
1/4-28 TAPPED
.25 6.4 .59 15.1
.75 19.1
ChMYI0
Material Material
NEMA & JIC
NEMA Clamp NEMA Clamp Bracket Bracket Material Material Thickness Thickness
Part Part Number Number
.40 10.1
NEMA Door NEMA Door Clamp Clamp Bracket Bracket Material Material
Finish Finish
Thread Thread
Material Material Thickness Thickness
185 185
steel steel
tumbled tumbled
1/4-20 1/420
.105 .105
185SS 18555
304SS 1/4-20 .105 304SStumbled tumbled 1/420 .105
185SS01 1855501
316SS 1/4-20 .105 316SStumbled tumbled 1/420 .105
18501 18501
steel steel
18501SS 1850155
304SS 1/4-28 .105 304SStumbled tumbled 1/428 .105
18502SS 1850255
316SS 316SS
Part Part Number Number
tumbled tumbled
mill mill
1/4-28 1/428
TAPPED HOLE 1/4-20 OR OR 1/4-28 1/428 .81 20.7 .81[20.7] 33.4 1.31 1. 31[33.4] .47 47[11.9 1.9]
.105 .105
1/4-28 1/428
.105 .105
185A 185A
aluminum tumbled 1/4-20 aluminum tumbled 1/420
.105 .105
18501A 18501A
aluminum tumbled 1/4-28 aluminum tumbled 1/428
.105 .105
411 3 1.14 29.0 1.14[29.0]
. .55 13.9 .55[13.9]
2.27 57.6 2.27[57.6]
NEMA Door NEMA Door Clamp Clamp Bracket Bracket Material Material
Finish Finish
Thread Thread
Material Material Thickness Thickness
186 186
steel steel
mill mill
1/4-20 1/420
.098 .098
186SS 18655
304SS 304SS
mill mill
1/4-20 1/420
.098 .098
18601 18601
steel steel
mill mill
1/4-28 1/428
.098 .098
18601SS 1860155
304SS 304SS
mill mill
1/4-28 1/428
.098 .098
Part Part Number Number
TAPPED HOLE 1/4-20 OR 1/4-28
1.13 28.6 1.13[28.6]
42.11] 11.66 66[42
.51 12.9 .51[12.9]
1.87 47.6 1.87[47.6] 3.13 79.4 3.13[79.4] .50 12.7 .50[12.7]
JIC Clamp JIC Clamp Bracket Bracket with with Weld Weld Projections Projections Material Material
Finish Finish
Thread Thread
Material Material Thickness Thickness
188 188
steel steel
tumbled tumbled
1/4-20 1/420
.098 .098
188SS 18855
304SS 1/4-20 .098 304SStumbled tumbled 1/420 .098
Part Part Number Number
188A 188A 18801 18801 18801SS 1880155 18801A 18801A
aluminum tumbled 1/4-20 aluminum tumbled 1/420 steel steel
tumbled tumbled
1/4-28 1/428
.098 .098
1.25 31.8 125[31.8] .63 16.1
.58 [14.7] 81 DEG DEG 81
.098 .098
304SS 1/4-28 .098 304SStumbled tumbled 1/428 .098 aluminum tumbled 1/4-28 aluminum tumbled 1/428
TAPPED HOLE 1/4-20 OR 1/4-28
.75 19.1 .75[19.1]
WELD PROJECTION (2) PLACES
.098 .098
JIC Clamp JIC Clamp Bracket Bracket Material Material
Finish Finish
Thread Thread
Material Material Thickness Thickness
18802 18802
steel steel
tumbled tumbled
1/4-20 1/420
.098 .098
18802SS 1880255
304SS 304SS
mill mill
1/4-20 1/420
.098 .098
Part Part Number Number
18803 18803
steel steel
mill mill
1/4-28 1/428
.098 .098
18803SS 1880355
304SS 304SS
mill mill
1/4-28 1/428
.098 .098
18804SS 1880455
316SS 316SS
mill mill
1/4-28 1/428
.098 .098
18803A 18803A
aluminum aluminum
mill mill
1/4-28 1/428
.098 .098
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.25 31.8 .68 [17.3]
TAPPED HOLE HOLE 1/4-20 OR OR 1/4-28 1/428
.53 [13.5] 81 DEG
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
193
1Ko NEMA & JIC 014 LT4 1111:1
''TERRA PACIFIC
ENGINEERING AND PRODUCTS
JIC Clamp JIC Clamp Bracket Bracket Part Part Number Number
1.25 31.8 .55 14.0
.70 17.9
Material Material
Finish Finish
Thread Thread
Material Material Thickness Thickness
182 182
steel steel
mill mill
1/4-28 1/428
.098 [2.50] .098 [2.50]
182SS 18255
304SS 304SS
tumbled tumbled
1/4-28 1/428
.105 [2.67] .105 [2.67]
182SS01 1825501
316SS 316SS
tumbled tumbled
1/4-28 1/428
.105 [2.67] .105 [2.67]
75°
1/4-28 TAP
JIC Lift-Off JIC Lift-Off Hinge Hinge .219 5.55 HOLE
.22 5.6 .22[5.6]
.44 11.1
Part Number Part Number
Finish Finish
Material Material Thickness Thickness
184 184
steel steel
mill mill
.075 [1.91] .075 [1.91]
184SS 18455
304SS 304SS
tumbled tumbled
.075 [1.91] .075 [1.91]
184A 184A
aluminum aluminum
tumbled tumbled
.075 [1.91] .075 [1.91]
316SS 316SS
tumbled tumbled
.075 [1.91] .075 [1.91]
184SS01 1845501
140°
Material Material
1.00 25.4 ] 1.00[25.4
JIC Cover JIC Cover Clamp Clamp Material Material
Finish Finish
Material Material Thickness Thickness
16ZN 16ZN
steel steel
yellow zinc zinc plated yellow plated
.074 [1.88] .074 [1.88]
16SS 1655
304SS 304SS
tumbled tumbled
.074 [1.88] .074 [1.88]
16SS-01 1655-01
316SS 316SS
tumbled tumbled
.074 [1.88] .074 [1.88]
Material Material
Finish Finish
Material Material Thickness Thickness
Part Part Number Number
.70 17.8 .70[17.8]
.66[16.7] x .27[6.7] SLOT
1.25 31.8 ] 1.25[ .50 12.7] 60[ 12.7
JIC Padlock JIC Padlock Box Box Staples Staples
.63 15.9 .63 15.9
Part Part Number Number
.63 15.9 63[15.9] TOP VIEW TOP VIEW
TOP VIEW TOP VIEW
J3061 J3061
steel steel
mill mill
.063 [1.60] .063 [1.60]
J3061SS J306155
304SS 304SS
tumbled tumbled
.063 [1.60] .063 [1.60]
Material Material
Finish Finish
Material Material Thickness Thickness
J3060 J3060
steel steel
mill mill
.063 [1.60] .063 [1.60]
J3060SS J306055
304SS 304SS
tumbled tumbled
.063 [1.60] .063 [1.60]
.375 .375 9.53 9.53 0.375[9.53]
.90 22.9 .90 22.9 .90[22.9]
.375 9.53
.90 22.9
.69 17.4 .69 17.4 .69[17.4] .37 9.5 .37 9.5 .37[9.5] .69 17.4
FRONT VIEWVIEW FRONT FRONT VIEW
.37 9.5 RIGHT RIGHT SIDE VIEW RIGHT SIDE SIDE VIEWVIEW
FRONT VIEW
RIGHT SIDE VIEW
JIC Padlock JIC Padlock Cover Cover Staples Staples
Part Part Number Number
.94.94 23.8 23.8 23.8 .94 94[23.8]
n
1.38 34.9 1.38 34.9 TOP VIEW TOP VIEW
1.38 34.9 1.38[34.9] TOP VIEW TOP VIEW
.63.63[15.9] 15.9 .63 15.9
.375 9.53 .375 9.53 0.375[9.53]
22.3 .88.88 22.3 .88[22.3] .63 15.9
.31.31[7.9] 7.97.9 .31 .59.59 15.1 15.1 ] 15.1
194 194
Download @www.spep.com www.spep.com Download=)DmoDELs @
.31 7.9
.06[1.5] ]
.06.06 1.51.5
FRONT VIEW FRONT VIEW FRONT VIEW
.375 9.53
.88 22.3
.68.68 17.3 17.3 .68T.3] .68 17.3
RIGHT SIDE VIEW RIGHT SIDE RIGHT SIDE VIEW .59 15.1 .06VIEW 1.5 FRONT VIEW
RIGHT SIDE VIEW Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industrial Hardware Hardware
Material Material
Finish Finish
316SS 316SS
mill mill
Material Material
Finish Finish
316SS 316SS
mill mill
X1402-01 X1402-01
Spring Spring
ChMYI0
Part Number Part Number
NEMA & JIC
3 1 6SS
Washer, .63 O.D. xx .05 Washer, .63 [15.9] [15.9] O.D. .05 [1.3] [1.3] Thick Thick Part Number Part Number
X1403-01 X1403-01
0 JIC Cover Screws JIC Cover Clamp Clamp Screws
Part Part Number Number
Size Size
Material Material
Finish Finish
X1404-03 X1404-03
1/4-20 1/420
316SS 316SS
mill mill
X1405-03 X1405-03
1/4-28 1/428
316SS 316SS
mill mill
)z)
JIC Quick JIC Quick Release Release Clamp Clamp Material Material
Finish Finish
2185ZN 2185ZN
Part Part Number Number
steel steel
yellow zinc zinc chromate yellow chromate
2185SS 218555
304SS 304SS
tumbled tumbled
2185SS01 21855501
316SS 316SS
tumbled tumbled SCREW SCREW (SOLD SEPARATELY) SEPARATELY) (SOLD
1.61 41.0 JIC CLAMP JIC CLAMP
1.51 38.2
shim washers washers shim
SHIM WASHERS SHIM WASHERS
1.44 36.5 .281 7.15 x.406[ x .406[ 10.31 10.31 ]] 0.281[7.15] OBROUND OBROUND 1.59 40.5 CLAMP BRACKET BRACKET CLAMP (SOLD SEPARATELY) (SOLD SEPARATELY)
OPEN POSITION POSITION OPEN
Meter Cover Cover Sealing Sealing Ring Meter Ring Part Part Component Number Component Number
.043 [1.09] .043 [1.09] aluminum, clear clear anodized aluminum, anodized
Ring Ring
J2014 J2014
Description 1 Description
.043 [1.09] .043 [1.09] SCREW Bracket CLIP Bracket aluminum, clear clear anodized aluminum, anodized
A
.093 [2.36] .093 [236] BRACKET steel, steel, yellow yellow zinc zinc chromate chromate
Clip Clip Screw Screw
1/4-24UNS UNS thread 1/424 thread steel, steel, yellow yellow zinc zinc chromate chromate
Ø6.96 [176.8] [176.8] MIN. MIN. 06.96 .65 [16.5] [16.5] .65 .15 [3.8] .15 [3.8]
a. .22 [5.6] [5.6] .22
.63[16.0] [16.0] - .63 .25 [6.4] MIN.
RING
A
AA
SCREW SCREW
CLIP CLIP
SECTION A-A SECTION A-A
BRACKET BRACKET
110111
A
v mak
.25 [6.4] [6.4] MIN. MIN. .25
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Ø6.96 [176.8 .65 [16.5] .22 [5.6]
.15 [3.8] .63 [16.0]
RING RING
SECTION A-A
To Place 800.433.5554 MIN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
195 195
1Ko NEMA & JIC 014 LT4 1111:1
SIEP"1 PP"IfFIC ENGINEERING AND PRODUCTS
Door Stop Kit Kit Door Stop Part Part Number Number
Item Item
Description Description
Material Material
Finish Finish
Qty. Qty.
11
1/4-20 nylon nylon 1/420 lock lock insert insert washer washer
18-8SS 18-8SS
mill mill
1 1
2 2
1/4" xx .63 .63 [15.9] [15.9] OD OD xx 1/4!' .039 [1.00] .039 [1.00] washer washer
304SS 304SS
deburred deburred
2 2
12.00 [304.8] 7.38 [187.5]
1460ZN 1460ZN 9
8
10 7
11 6
5
4
door bracket bracket door
steel steel
zinc plated zinc plated
1 1
10-32 hex 10-32 hex nut nut
18-8SS 18-8SS
mill mill
2 2
5 5
10-32 xx .38 .38 [9.5] [9.5] 10-32 SPM screw SPM screw
18-8SS 18-8SS
mill mill
4 4
6 6
stop arm arm stop
steel steel
zinc plated zinc plated
1 1
7 7
1/4-20.75 .75 [19.1] [19.1] 1/420 carriage carriage bolt bolt
18-8SS 18-8SS
mill mill
3 3
8 8
#10 .44 [11.1] OD x #10 xx.44 [11.1]0Dx .032 [.80] .032 [.80] washer washer
nylon nylon
natural natural
4 4
9 9
mounting bracket mounting bracket
steel steel
zinc plated zinc plated
1 1
10 10
1/4-20 hex hex washer washer 1/420
18-8SS 18-8SS
mill mill
1 1
11 11
clip nut clip nut
steel steel
zinc plated zinc plated
22
12 12
sealing washer sealing washer
18-8SS // 18-8SS neoprene neoprene
deburred deburred // black black
1 1
13 13
wing knob wing knob
phenolic phenolic
black black
1 1
lock in in any any position with finger I lock position with finger turn turn wing wing knob knob
12
3
3 3 4 4
13
2 1
Steel Door Door Stop Steel Stop 1, Part Part Number Number
Item Item
9.06 9.06 [230.0] [230.0]
1462ZN 1462ZN
8.98 [228.0]
Description Description
Material Material
Finish Finish
Qty. Qty.
11
base base hasp hasp
steel steel
zinc plated zinc plated
1 1
2 2
mounting bracket mounting bracket
steel steel
zinc plated zinc plated
1 1
3 3
M6 M6 xx 1.0 1.0 cap cap screw screw
steel steel
zinc plated zinc plated
1 1
4 4
large large washer washer
steel steel
zinc plated zinc plated
1 1
5 5
small washer small washer
steel steel
zinc plated zinc plated
1 1
6 6
rotating rotating hasp hasp
steel steel
zinc plated zinc plated
1 1
7 7
bolt bolt
steel steel
zinc plated zinc plated
1 1
8 8
pin pin
steel steel
zinc plated zinc plated
1 1
featurelocks locks position position at ►detent/pop-up detent/pop-up feature at end end
7
6 5
1 4 3
2 8
196
Download =)DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industrial Hardware Hardware
Finish Finish
GE1LH G E1LH
CAT CAT 60 60
left left
zinc plated zinc plated
GE1RH G E1RH
CAT CAT 60 60
right right
zinc plated zinc plated
GE1LH1 GE1LH1
SP 60 SP 60
left left
zinc plated zinc plated
GE1RH1 GE1RH1
SP 60 SP 60
right right
zinc plated zinc plated
1.06 27.0 1.06[27.0]
1.37 34.8 1.37[34.8]
1.85 47.0 1.85[47.0] 1.93 49.1 2.55[64.7] 2.55 64.7 1.93[49.1]
2.99 75.9 2.99[75.9]
lever and and bolt bolt are are die die cast cast zinc zinc I lever caseis is formed formed steel I case steel maximumintended intendedpanel panelthickness thicknessisis.120 .120 [3.05] [3.05] I maximum key removable removable in in locked locked or or unlocked I key unlocked position position
5.00 xx.245[ .245[ 6.22 6.22 ]] 0..197 97[5.00] OBROUNDS, (2) OBROUNDS, (2) PLCS. PLCS.
.25 6.4 ---.25[6.4]
ChMYI0
Left Left or or Right Right
NEMA & JIC
Panel Board Latch Latch Panel Board Part Key Part Key Code Code Number Keys) Number (2(2Keys)
.060H1. 1.52 -060 52]— THK.
LEFT LEFT HAND HAND SHOWN SHOWN
Small Print Small Print Pocket Pocket Part Part Number Number
Double Double Sided Sided Tape Tape
Material Material
177P 177P
yes yes
ANSI 61 ANSI 61gray graypolystyrene polystyrene
177P-04 177P-04
no no
ANSI 61 ANSI 61gray graypolystyrene polystyrene 3.31 84.1
pocketsare areindividually individually polybagged I pockets polybagged customlogos logosand andinstruction instructionsheet sheetavailable available if if I custom ordered in sufficient ordered in sufficient quantity quantity
6.63 168.3] 6.63[168.3 .219 5.56
6.53 165.9
.25 6.4
1.00 25.4
Large Large Print Print Pocket Pocket Part Part Number Number
Double Double Sided Sided Tape Tape
Material Material
yes yes
ANSI 61 ANSI 61gray graypolystyrene polystyrene
179P 179P 179P-10 409179P-10
yes yes ANSI61 61 gray gray polystyrene polystyrene heavy duty tape ANSI heavy duty tape
179P-04 179P-04
no no
ANSI 61 ANSI 61gray graypolystyrene polystyrene
pocketsare areindividually individually polybagged I pockets polybagged customlogos logosand andinstruction instructionsheet sheetavailable available if if I custom ordered in sufficient ordered in sufficient quantity quantity
4.70 119.3 4.70[ 19.3
9.40 238.7 9.40[238.7] .226 5.73 0.226[5.73
9.95 252.8 9.95[252.8]
.23 5.8 -0-.23[5.8]
1.13 1.13[ 28.7 28.7 ]
Louvered Louvered Vent Vent Part Part Number Number
J6022SS J602255
Material Material
Finish Finish
304SS 304SS
electropolished electropolished 6.00 152.4 6.00[152.4]
.33 8.3 .33[8.3
2.25 57.2 2.25[57.2] 5.00 127.0 5.00[127.0] 2.25 57.2 2.25[57.2]
2.75 69.9 2.75[69.9]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
2.75 69.9 2.75[69.9]
.157 4.00 HOLE HOLE 0.157[4.00] (8) PLCS. (8) PLCS.
.047 1.20 .047[1.20] THK. THK.
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
197
1Ko NEMA & JIC 014 LT4 1111:1
'wqR/ft -MCIFIC ENGINEERING AND PRODUCTS
Oil-Tight Hole Oil-Tight Hole Seals Seals
31655
ENCLOSURE CAP
GASKET
BACK PLATE
stainless steel, stainless steel, brushed brushed
steel, textured gray powder steel, textured gray powder coat coat
steel, gray steel, gray painted painted
WING NUT VIEW FROM VIEW FROM INSIDE INSIDE OF OF ENCLOSURE ENCLOSURE
Part Part Number Number
T110 T110
steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T110SS T110SS
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T110SS-10 T11055-10
T114SS T11455
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T114SS-10 T11455-10
1.22 [31.0] [31.0] 1.22
1/2-inch [13] [13] 1/2-inch conduit conduit holes holes
.88 [22.4] [22.4] .88
1.38 [35.1] [35.1] 1.38
3/4-inch [19] [19] 3/4-inch conduit conduit holes holes
1.06 [26.9] [26.9] 1.06
1.56 [39.6] [39.6] 1.56
standard oil-tight oil-tight standard push-button push-button holes holes
1.25 [31.8] [31.8] 1.25
1.75 [[44.5] 1.75 44.5]
1-inch [25] 1-inch [25] conduit conduit holes holes
1.38 [35.1] [35.1] 1.38
1.88 [47.8] [47.8] 1.88
304SS cap 304SS cap & &components components 316SS cap 316SS cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T116 T116
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap
T116-10 T116-10
steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T116SS T11655
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T116SS-10 T11655-10
304SS cap 304SS cap & &components components 316SS cap 316SS cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T112 T112
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap
T112-10 T112-10
steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T112SS T11255
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T112SS-10 T11255-10
304SS cap 304SS cap & &components components 316SS cap 316SS cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T118 T118
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap
T118-10 T118-10
steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T118SS T11855
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T118SS-10 T11855-10 T118SST-10 T11855T-10
.88 [22.4] [22.4] .88
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T112SST-10 T11255T-10
miniature miniature oil-tight oil-tight push-button push-button holes holes
316SS cap 316SS cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T114-10 T114-10
T116SST-10 T11655T-10
Hole Seal O.D. O.D. Hole Seal
304SS cap 304SS cap & &components components
T114 T114
T114SST-10 T11455T-10
Max. Max. Hole Hole Diameter Diameter
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap
T110-10 T110-10
T110SST-10 T110SST-10
Application Application
Material Finish Material // Finish
304SS cap 304SS cap & &components components 316SS cap 316SS cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
protectsknockout knockoutopenings openingsand andextra extrapush-button push-buttonororconduit conduitopenings openingsfrom fromdirt, dirt, oil, oil, dust I protects dust and and water water
198
Request Info
Download =)Dmoons @ www.spep.com Download @ www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
Material // Finish Finish Material
T120 T120
steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T120SS T12055
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T120SS-10 T12055-10
T122SS T12255
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T122SS-10 T12255-10
1 1/2-inch [38] 1 1/2-inch [38] conduit holes conduit holes
2.00 [50.8] 2.00 [50.8]
2.50 [63.5] 2.50 [63.5]
2-inch [51] 2-inch [51] conduit holes conduit holes
2.50 [63.5] 2.50 [63.5]
3.00 [76.2] 3.00 [76.2]
2 1/2-inch [64] 2 1/2-inch [64] conduit holes conduit holes
3.00 [76.2] [76.2] 3.00
3.50 [88.9] 3.50 [88.9]
3-inch [76] [76] 3-inch conduit holes conduit holes
3.62 [92.0] [92.0] 3.62
4.12 [104.7] [104.7] 4.12
3 1/2-inch [89] 3 1/2-inch [89] conduit holes conduit holes
4.12 [104.7] [104.7] 4.12
4.62 [117.4] [117.4] 4.62
4-inch 4-inch [102] [102] conduit holes conduit holes
4.62 4.62 [117.4] [117.4]
5.12 5.12 [130.1] [130.1]
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T124SS T12455
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T124SS-10 T12455-10
304SS cap 304SS cap &&components components 316SS 316SS cap cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T126 T126
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap
T126-10 T126-10
steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T126SS T12655
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T126SS-10 T12655-10
304SS cap 304SS cap &&components components 316SS 316SS cap cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T128 T128
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap
T128-10 T128-10
steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T128SS T12855
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T128SS-10 T12855-10
304SS cap 304SS cap &&components components 316SS 316SS cap cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T130 T130
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap
T130-10 T130-10
steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T130SS T13055
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T130SS-10 T13055-10
304SS cap 304SS cap &&components components 316SS 316SS cap cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T132 T132
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap
T132-10 T132-10
steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T132SS T13255
304SS cap 304SS cap and and weld weld stud stud with with steel steel back back plate plate and and wing wing nut nut
T132SS-10 T13255-10 T132SST-10 T13255T-10
2.19 [55.6] 2.19 [55.6]
316SS 316SS cap cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T124-10 T124-10
T130SST-10 T13055T-10
1.69 [42.9] [42.9] 1.69
304SS cap 304SS cap &&components components
T124 T124
T128SST-10 T12855T-10
1 1/4-inch [32] 1 1/4-inch [32] conduit holes conduit holes
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap steel, ANSI ANSI 61 steel, 61textured texturedgray graypowder powder coat coat cap cap
T126SST-10 T12655T-10
Hole Seal Seal O.D. O.D. Hole
316SS 316SS cap cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
T122-10 T122-10
T124SST-10 T12455T-10
Max. Hole Max. Hole Diameter Diameter
304SS cap 304SS cap &&components components
T122 T122
T122SST-10 T12255T-10
Application Application
steel, ANSI ANSI 61 steel, 61gray graypainted painted cap cap
T120-10 T120-10
T120SST-10 T12055T-10
Oil-Tight Hole Hole Seals Seals Oil-Tight
ChMYI0
Part Number Part Number
In
NEMA & JIC
31655
Hinges-Ind and Industrial Hardware Hi-!nth -trial Hardware
304SS cap 304SS cap &&components components 316SS 316SS cap cap and and weld weld stud stud with with 304SS 304SSback backplate plate and and wing wing nut nut
knockout openings openings and and extra extra push-button push-buttonor orconduit conduitopenings openingsfrom fromdirt, dirt, oil, oil, dust ►protects protects knockout dust and and water water
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place To PlaceOrder: Order
0
800.433.5554 OM
[email protected] [email protected] 800.433.5554
199
1Ko NEMA & JIC 014 LT4 1111:1
PACR"C
ENGINEERING AND PROP""
---
Electrical Box Box Hinge Assembly Kits Kits -- Quick Release Pin Electrical Hinge Assembly Quick Release Pin Kit Part Kit Part Number Number
J2088SS J208855
Component Component Part Part Number Number
Description Description
Material Material
Finish Finish
X127-03 X127-03
quick release pin quick release pin
304SS 304SS
mill mill
X123SS X12355
box box leaf leaf
304SS 304SS
mill mill
J2073SS J207355
lid lid leaf leaf
304SS 304SS
mill mill
X124SS X12455
8-32 FHS FHS 8-32
18-8SS 18-8SS
mill mill
J2074ZN J2074ZN
utility bracket utility bracket
steel steel
zinc zinc
P1037 P1037
sealing sealing washer washer
nylon nylon
smooth smooth
foraaproper properseal seal between between box box leaf, leaf, electrical I for electrical box box and and utility utility bracket, bracket, the through throughholes holeson onthe theelectrical electricalbox boxmust mustbe be.234 .234[5.94] [5.94]-- .236 .236 [6.00] [6.00] the diameter diameter .18 4.7 .18[4.7] .059 1.50 ] .059[1.50 THK. THK.
.25 6.4 ] .25[6.4
1.02 25.9 1.02[25.9]
.81 20.6 ] .81[20.6
LID LEAF LID LEAF
LID LEAF
LID LEAF LEAF LID
.66 16.7 CENT.
C'SUNK FORC'SUNK FOR FOR .66 16.7 .66[16.7] A #8 F.H.S. A #8 F.H.S. CENT. (2) PLCS. (2) PLCS.
2.52 64.0
2.52 64.0 2.52[64.0]
8-32 8-32 F.H.S. F.H.S.
b SEALING SEALING WASHERS
.47[11.9] .47 11.9
.53 13.5
.47 11.9
.059 1.50 .059 1.50 .059[1.50] THK. THK.
.53 13.5 .53[13.5]
.56 14.3
QUICK RELEASE RELEASE PIN PIN QUICK
.56 14.3
BOX LEAF BOX LEAF 1.25 31.8 1.25[ 31.8]
BOX BOX LEAF LEAF
BOX LEAF BOX LEAF .55 13.9 .55[13.9]
UTILITY UTILITY BRACKET BRACKET
8-32 THD. (2) PLCS.
.66 16.7 .66[16.7] 10-32 THD.
EXPLODED VIEW EXPLODED VIEW EXPLODED VIEW
.88 22.2 .88[22.2]
.15 3.8 .15[3.8] TYP.
.071 1.80 .071[1.80] THK.
.63 15.9
UTILITY BRACKET BRACKET UTILITY
10-32 Thread Utility UtilityBracket Bracket and and Screws Screws 10-32 Thread
UTILITY BRACKET Description Description
Material Material
Finish Finish
J2115SS J211555
#10-32 #10-32 screws screws & seal & seal washers washers
304SS screws 304SS screws Teflon nylon washers Teflon nylon washers
mill screws mill screws smooth washers washers smooth
J2074ZN-01 J2074ZN-01
utility bracket utility bracket
steel steel
zinc plated zinc plated
Part Number Part Number 10-32 THREAD
foraaproper properseal seal between between box box leaf, leaf, electrical I for electrical box box and and utility utility bracket, bracket, the through throughholes holeson onthe theelectrical electricalbox boxmust mustbe be.234 .234[5.94] [5.94]-- .236 .236 [6.00] [6.00] the diameter diameter SEALING WASHER SEALING WASHER 10-32 F.H.S. F.H.S. 10-32
200
Download @www.spep.com www.spep.com Download.7)DmoDELs @
10-32 THREAD THREAD 10-32 (3) PLACES PLACES (3) UTILITY UTILITY BRACKET BRACKET
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and and Industrial IndustrialHardiAp-rp Hardware Hinges
Finish Finish
J2188 J2188
steel steel
zinc plated zinc plated
J2188SS J218855
304SS 304SS
passivated passivated
includes: I includes: box leaf leaf I box lid leaf leaf I lid pin I pin capture ring ring I capture
90.0 3.54 [90.0] 3.54 1.99 50.6 1.99[50.6] .98 [25.0] 25.0 .98 CENT. CENT.
.248 [6.30] 6.30 xx .358 .358 [9.10] [9.10] 0.248 (2) OBROUNDS OBROUNDS (2)
.118 3.00 .118[3.00]
.098 2.50 1.08 [27.5] 27.5 1.08
.256 6.50 HOLE HOLE 0.256[6.50] FOR M6 F.H.S. F.H.S. OR M6 (2) PLCS. PLCS. (2)
.236 [6.00] 6.00 0.236
ChMYI0
Material Material
NEMA & JIC
Heavy with Quick Quick Release Pin Heavy Duty Duty Hinges Hinges with Release Pin Part Part Number Number
.91 23.0
Enclosure Kits with Enclosure Hinge Hinge Kits with Cast Cast Box Box Leaves Leaves Part Part Number Number
J2130 J2130 J2130SS J213055
Box Box Leaf Leaf Material Material
Finish Finish
die zinc die cast cast zinc
clear clear zinc zinc
304SS 304SS
passivated passivated
includes: includes: box leaf leaf I box lid leaf leaf I lid pin I pin ►c-clip c-clip (2) 1/4-20 1/4-20 screws screws I (2) (2) sealing sealing washers I (2) washers (2) 1/4-20 1/4-20 nylon I (2) nylon nuts nuts
3.15 80.0 3.15[80.0] 1.18 30.0 1.18[30.0] CENT.
.93 23.7
HEX WITH WITH .45 11.5 HEX .45[11.5] .08[2.0] DEEP DEEP C'BORE CBORE (2) PLCS. PLCS. (2)
1.12 28.5
.20 5.0 0.20[5.0]
.16 4.0 0.18[4.0] (2) WELD GUIDES
.59 15.0
.79 20.0 .79[2o.o] TOP VIEW T P VIEW
RIGHT SIDE SIDE VIEW VIEW RIGHT
Enclosure Enclosure Hinge Hinge Box Leaf Box Leaf Part Part Number Number
Material Material
Finish Finish
J3090 J3090
steel steel
zinc plated zinc plated
J3090SS J309055
304SS 304SS
mill mill
BOX LEAF
QUICK RELEASE PIN QUICK RELEASE PIN
.41 10.3 .41[10.3]
.375 9.53 HOLE HOLE 0.375[9.53] (4) PLCS.
C 1.00 25.4 1.00[25.4] CENT.
1.38 [34.9] 34.9 1.38 CENT.
.38 9.5 .38[9.5] TYP.
.63 [15.9] 15.9 .83 TYP.
LID LEAF
.203 5.16 0.203[5.18] TYP.
.73 18.6 .73[18.8]
.73 18.7 .73[18.7]
071
.102 2.60 .102[2.60]
THK.
3.75 [95.3] 95.3 3.75
.97 24.6 97 [24.8]
Lid Lid Leaf Leaf Material Material
Finish Finish
J3091 J3091
Part Part Number Number
steel steel
mill mill
J3091SS J309155
304SS 304SS
mill mill
.102 2.60 .102 [2.60] THK. THK.
1.34 34.1 1.34[34.1]
1.08 27.4
.203 5.16
Quick Pin Quick Release Release Pin Part Part Number Number
Material Material
Finish Finish
J3092 J3092
steel steel
zinc & & zinc yellow chromate yellow chromate
J3092SS J309255
304SS 304SS
mill mill
.75 19.1 .75[19.1
.185 4.70 (6.185[4.70] THK. THK.
2.38 [60.3] 60.3 2.38
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
201 201
1Ko NEMA & JIC 014 LT4 1111:1
''TERRA PACIFIC EP - -ERING AND PRODUCTS Hinge Assembly Assembly with Hinge with Removable Removable Pin Pin Part Number Material Part Number Material
75.0 2.95 [75.0] TYP.
steel steel
zinc plated zinc plated
H2064SS H206455
304SS 304SS
passivated passivated
hingemay maybe bequickly quickly unassembled unassembled by I hinge by removing e-clip e-clip and and releasing releasing the removing the pin pin
52.0 2.05 [52.0]
1.57 40.0 ?0] TYP. F
Finish Finish
H2064ZN H2064ZN
.256 6.50 HOLE HOLE 0.256[6.50] (4) PLCS.
TOP VIEW TOP VIEW E-CLIP
.61 15.5
21.5 .85 [21.5]
.236 6.00 PIN PIN 0.236[6.00] COLD HEADED
3.66 93.0
16.0 .63 [16.0] TYP.
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW
Hinge Assembly Assembly with with Quick Quick Release Release Pin Hinge Pin Part Part Number Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
H2039ZN H2039ZN
hingemay maybe bequickly quicklyunassembled unassembled by I hinge by removing cotter cotter pin pin and and releasing releasing the removing the pin pin 17.3 .68.68 17.3 -•-• .68 [17.3]
31.8 1.2531.8 [31.8] 1.25 CENT. CENT.
.03.7 [.7] .7 .03.03
2.6667.6 67.6 2.66 2.66[67.6] 1.85 47.0 1.85 47.0 • 1.85 [47.0]
.110 2.80 2.80 .110 [2.80] THK. THK.
.2105.33 5.33H H H OLE OLE 0.210 [5.33] .210 OLE PLCS. (2)(2) PLCS.
h
.1884.78 4.78PIN PIN .188
.9022.9 22.9 [22.9] .90.90
.6316.0 16.0 [16.0] .63.63
22.9 .90.90 22.9 .90122.91 .34.34 8.78.7 .34 [8.7]
1.2531.8 31.8 1.25 [31.8] 1.25 CENT. CENT.
.2807.11 7.11HOLE HOLE WITH 0.280 [7.11] HOLE WITH WITH .280 .380 9.65 XX82 C'SINK 0.380 [[ 9.65 82° MINK .380 [ 9.65 ] X]]82 C'SINK OPPOSITE SIDE, (2) PLCS. OPPOSITE SIDE, (2) PLCS.
11.9 .47.4711.9
BOTTOM VIEW BOTTOM WEN, BOTTOM VIEW
COTTER PIN COTTER PIN
END VIEW
1.88 47.8 1.88 47.8 1.88 [47.8] TOP VIEW
END WIEN! VIEW END
TOP VIEW TOP VIEW
Hinge Body Body and Pin Hinge and Hinge Hinge Pin Part Part Number Number 2.40 .094 [2.40] THK. THK
25.4 1.00 [25.4] CENT.
7.0 .28 [7.0]
J3093 J3093
Material Material
Finish Finish
steel steel
zinc & zinc & yellow chromate chromate yellow
Material Material
Finish Finish
steel steel
zinc & zinc & yellow chromate chromate yellow
10.2 .40 [10.2] 35.3 1.39 [35.3]
94°
94'
.219 5.56 HOLE HOLE 0.219[5.56] (2) PLCS.
92°
.167 [4.24] 4.24 0.167 .50 [12.8] 12.8
1.50 38.1
x 45 .03 .8 x45° .03[.8] CHAMF. CHAMF.
Part Part Number Number
J3095 J3095 .157 [4.00] 4.00 0.157 2.34 59.5 2.34[59.5]
202 202
Download www.spep.com Download-7)DmoDus @ @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Foreword Foreword In hingemanufacturing manufacturingmembers membersofofthe theBuilders BuildersHardware HardwareManufacturers Manufacturers Association, Association, Inc. Inc. In 1970, 1970, continuous continuous hinge (BHMA) initiated (BHMA) initiatedan anextensive extensive testing testing program. program. ItItstarted startedwith within-house in-housetesting testing at attwo two member member company company facilities facilities and culminated culminated with with two twophases phasesofoftesting testingconducted conducted the BHMAby bythe theIllinois IllinoisInstitute InstituteofofTechnology Technology(IIT). (IIT). and forfor the BHMA The findings formed The findings of of the the IIT IITwere wereanalyzed analyzedby byananindependent independentmechanical mechanicalengineer engineerwhose whose recommendations recommendations formed the basis basis for for this the this guide. guide.
Hinges
Excerpts Excerpts From From“A "AGuide Guidefor forSelecting SelectingContinuous Continuous Hinges” Hinges"
General General
2.1 2.1 2.2 2.2
The criteria upon yield yield load load and and not notupon uponultimate ultimateload load(failure). (failure). The The ratio ratio of The criteriain inthis this guide guide is is based based upon of ultimate to yield yield load load is is at at least least 1.5 1.5for for all all hinges hingesand andisisaanatural natural safety safety factor. factor. Impact Impact or ultimate load load to or shock shock loads loads are are not not included. included. Additional safety considered based basedon onthe thematerial materialrequirement. requirement.Generally Generally harder harder Additional safety factors factors should should be be considered materials, materials, or or metals, metals, result result in in stronger stronger hinges. hinges.
Strength Factors Strength Factors
3.1 3.1
Hinges forces are pin. Hinges are are strongest strongest in in horizontal horizontal stress stress when when the the forces are applied applied perpendicular perpendicular to to the the hinge hinge pin. Hinges in vertical forces are are applied parallel to pin. Hinges are are weakest weakest in vertical stress stress when when the the forces applied parallel to the the pin.
3.2 3.2
In the stronger stronger itit will will In horizontal horizontalload, load,the the strength strength per per unit unit of of length length is is constant. constant. The The longer longer the the hinge, hinge, the be. be.
3.3 3.3
In In vertical verticalload, load,strength strengthincreases increaseswith withthe the square square of of the the length. length.
3.4 3.4
As the leaf thickness increases. As the hinge hinge leaf thickness increases, increases, hinge hinge strength strength increases.
3.5 3.5
As the pin is increases provided pin diameter As the diameter diameter of of the the hinge hinge pin is reduced, reduced, hinge hinge strength strength increases provided the the pin diameter is is not not
3.6 3.6
Under Under vertical vertical stress, stress, shorter shorterhinge hinge knuckles knuckles provide provide greater greater strength. strength.
reduced twice the the thickness thickness of of the the leaf. leaf. reduced below below twice
Recommended SelectionCriteria Criteria Recommended Selection When applicable, material to is When applicable, use use aa hinge hinge thickness thickness approximately approximately the the same same as as the the material to which which the the hinge hinge is
4.1 4.1
to be be attached. attached. to
4.2 4.2
Select hinges hinges with with the the smallest smallest possible possibleknuckle knuckle length length and and having having at at least least 10 10 knuckles. knuckles. Select
4.3 4.3
Choose aa hinge hinge having having the the smallest smallest pin pin diameter diameter (see 3.5) available Choose (see 3.5) available for forthe thehinge hinge thickness thickness selected. selected.
4.4 4.4
Apply aa hinge knuckles always is to to be be used usedunder underhorizontal horizontal stress stress only. only. Apply hinge with with the the knuckles always out out if if the the hinge hinge is
4.5 4.5
Using Using this this application, application, the the strength strength will will not not vary varywith withthe theangle angle of of opening. opening. Lubricating them by by aa factor factor of of about about25%. 25%. Allow Allow aa safety safety factor factor of of 25% 25% ifif hinges are Lubricatinghinges hinges weakens weakens them hinges are to be be lubricated. lubricated. to
________________________________________ Complete copies copies of of this this guide guide are are available available upon request. Get Get the full guide Complete upon request. the full guide at at SPEP.com® SPEP.com® registeredtrademark trademarkofofS.P.E.P S.P.E.P Acquisition SPEP.com isis aa registered SPEP.com Acquisition Corp. Corp.
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
203 203
Hinges
..." M"
"WU°
PRODUCTS
Continuous Hinge Continuous Hinge Terminology Terminology MATERIAL MATERIAL THICKNESS THICKNESS
HINGE LENGTH HINGE LENGTH
C
LEAF LEAF LEAF LEAF WIDTH WIDTH OPEN OPEN WIDTH WIDTH
PAINT PAINT CLEARANCE CLEARANCE
li
KNUCKLE KNUCKLE
Material Material Thickness Thickness
KNUCKLE _ y KNUCKLE LENGTH LENGTH
PITCH PITCH
PIN PIN DIAMETER DIAMETER
END PLAY END PLAY
The thickness hinge leaf. leaf. The thickness of of the the hinge
One One leaf leaf swaged swaged one-half one-half the the pin pin diameter. diameter.
One Leaf Leaf One Half-Swaged Half-Swaged
Leaf Leaf
The portion of aa hinge laterally from The portion of hinge extending extending laterally from the the knuckle which usually knuckle and and which usually revolves revolves around around aa pin. pin.
Open Width Open Width
The overall The overall dimension dimension of of the the leaves leaves measured measured perpendicular to, or or across, perpendicular to, across, the the pin. pin.
Knuckle Knuckle
The hollow The hollow circular circularpart part at at the the joint joint of of aa hinge hinge through through which aa pin pin is is passed. which passed. The The knuckle knuckle is is often often called called aa loop, loop, joint, node or curl. curl. joint, node or
Knuckle Knuckle Diameter Diameter
The outside of the knuckle. The outside diameter diameter of the knuckle.
Knuckle Knuckle Length Length
The nominal The nominal or or typical typical dimension dimension of of the the knuckle knuckle measured parallel to measured parallel to the the pin. pin.
Pitch Pitch
The dimension The dimension from from aa point point on on the the knuckle knuckle to to the the same same point knuckle on same leaf. leaf. point on on an an adjacent adjacent knuckle on the the same
Paint Paint Clearance Clearance
The minimum outer face face of The minimum dimension dimension between between the the outer of the the knuckle knuckle and and the the opposing opposing edge edge of of the the cutout cutout over over the the hinge’s hinge's entire entire range range of of pivotal pivotal movement. movement.
End End Play Play
The amount of axial leaves. The amount of axialmovement movement between between the the leaves. This isisaasurface-type The leaves leaves lie lie flat This surface-type hinge. hinge.The flat in in the the same plane plane when when in in the the open open position. position. Unless Unless otherwise same otherwise indicated, this type of hinge will be indicated, this type of hinge will be furnished. furnished.
Plain Plain or or Standard Standard Assembly Assembly
one leaf half one leaf half swaged swaged
One Leaf Leaf One Full-Swaged Full-Swaged
The forming The forming of of one one or or both both leaves leaves toward toward or or beyond beyond the the center of the the pin. pin. Swaging Swaging slightly slightly increases center of increases leaf leaf width. width.
et One leaf to simulate simulate reversed reversed assembly. assembly. Leaves Leaves One leaf swaged swaged to will not will not close close to to aa parallel parallel position. position.
Reversed Reversed Swaged Swaged
.V
reversed reversed swaged swaged
Forming leaves away Forming one one or or both both leaves away from from the the center center of of the the pin. pin. Offsetting Offsetting slightly slightly decreases decreases leaf leaf width. width.
Offset Offset offset offset
This hinge for special This hinge has has two two pins pins or or more more for special applications. applications.
Multiple Multiple
I I10multiple multiple
Stop Hinge Stop Hinge
A to limit limit the travel of of the leaves to A hinge hinge manufactured manufactured to the travel the leaves to aa specified angle. specified angle. Leaves Leaves will willopen open from from aa closed closed position, position, leaves leaves parallel parallel to to each other, other, to angle as as specified. specified. each to aa stop stop angle
Inside Inside Stop Hinge Stop Hinge
Neither laterally Neither leaf leaf swaged. swaged. Opposing Opposing leaves leaves extend extend laterally from opposite sidesof of pin. pin. Leaves Leaves will will not from opposite sides not close close to to parallel parallel position. position.
open open
One leaf to the the pin pin diameter. diameter. Both Both leaves One leaf swaged swaged equal equal to leaves parallel parallel when when in in aa closed closed position. position.
one leaf full full swaged one leaf swaged
open open
closed closed
Reverse Reverse Assembly Assembly
KNUCKLE KNUCKLE DIAMETER DIAMETER
inside inside operating operating arc
Leaves Leaves move move from froman anopen open or or flat flat position position and and stop stop at at aa specified angle. specified angle.
h--------
outside arc outside operating operating arc
Outside Outside Stop Hinge Stop Hinge I
Swaging Swaging 101
Usual arc of Usual maximum maximum arc of 270° 270° which which varies varies from from series series to to series and for custom series and can can be be changed changed for custom applications. applications.
swaging swaging
Both Both Leaves Leaves Half-Swaged Half-Swaged
Both Both leaves leaves are are swaged swaged approximately approximately one-half one-half the the pin pin diameter with aa minimum leaves diameter with minimum clearance clearance between between leaves when parallel. parallel. when
270° 270°
Back Back Angle Angle
•
both leaves half half swaged both leaves swaged back angle backangle
204 204
Download 3DmoDELs @ @www.spep.com www.spep.com Download
.
Hinges and Industrial Hardware
Perforating Perforating Terminology Terminology EDGE D M.
END DIM.
HOLE CENTERS
STAGGER ROUND
IN LINE
RECTANGULAR (VERTICAL)
RECTANGULAR (HORIZONTAL)
OBROUND (VERTICAL)
0
0
0
0
I t OPEN WIDTH
e
ED
ED
COUNTERSUNK HINGE LENGTH
Perforating Perforating
NOTCH (SQUARE END)
SQUARE
NOTCH OBROUND (RADIUS END) (HORIZONTAL)
Many are available. available. When Many designs designs for for perforating perforating are When ordering ordering or requesting quotation, include: include: hinge or requesting aa quotation, hinge dimension, dimension, hole hole diameter diameter and and type, type, hole hole centers, centers, edge edge dimensions. dimensions. Ask about hole patterns. patterns. Above Above are are several several Ask about any any standard standard hole common common perforating perforating designs. designs.
continuous hinges can can be cut to to exact exact length as required. continuous hinges be cut length as required. Hinges Hinges should, should, however, however,be bedesigned designed to to aa length length that that is is aa multiple multiple of of the the knuckle knuckle length length to to eliminate eliminate partial partial knuckles. knuckles. IfIfaapartial partialknuckle knucklecannot cannot be be avoided, avoided, please please keep following points points in in mind: mind: (1) (1) partial keep the the following partial knuckle knuckle lengths should be be the the same same as, as, or or larger larger than, knuckle lengths should than, the the knuckle diameter; (2) when diameter; (2) when partial partial knuckles knuckles are are required required on on both both ends, should be be on on the the same sameleaf; leaf; (3) (3) please ends, they they should please be be advised continuous hinges hinges with with partial partial end knuckles advised that that continuous end knuckles on one one leaf leaf may may not not rotate rotateas asfreely freely as as full full end on end knuckles. knuckles.
some of of the more commonly commonly used some the more used designs designs are: are:
Notched Notched Leaves Leaves
corners corners notched notched
angled corners corners angled
Hole Hole Locations Locations A A sketch sketch or or sample sample showing showing theirlocations locationsisis usually usually - their required for quoting. required for quoting. Please Please submit your drawing submit your drawing or or print. print.
Hinges
Continuous Hinge Hinge Terminology Continuous Terminology
Length Length
full-end knuckle full-end knuckle
radius radius corners corners
complete complete corners corners notched notched
Formed in aa variety Formed hinge hinge leaves leaves can can be be supplied supplied in variety of configurations of configurations (including (including those those illustrated illustrated here). here). Dimensions line and Dimensions should should be be taken taken from from the the pin pin center center line and inside of inside of forms. forms. Unless Unlessotherwise otherwise indicated, indicated, the the inside inside radius radius of of the the form form is is the the same same as as the the material material thickness. thickness.
partial-end knuckle partial-end knuckle
Pin Pin Retention Retention 100 15
Formed Formed Leaves Leaves
Upsetting the knuckle(s) knuckle(s) of Upsetting the of one one leaf leaf secures secures the the pin pin and prevents axial axial movement of the pin in in the knuckle. and prevents movement of the pin the knuckle. Staking is of the the knuckle knuckle in in Staking is usually usuallylocated located on on the the bottom bottom of aa uniform, uniform, consistent consistent pattern. pattern.
both leaves formed formed down 90° both leaves down 90°
one leaf leaf formed to 90° 90° one formed up up to
All Allstandard standard continuous continuous hinges hinges are are stocked stocked with with loose loose pins of steel, pins and and flush flush cut cut ends, ends, with with the the exception exception of steel, aluminum, and stainless steel inch aluminum, and stainless steel hinges hinges with with quarter quarter inch knuckles knuckles which which will willbe bestaked staked to to retain retain the the pins. pins.
Staked Pin Pin Staked
both leaves formed formed up up 90° 90° both leaves staked pin pin staked
Unequal Unequal Leaves Leaves
Unequal leaves are are available available on on all all hinges. Unequal leaves hinges. Widths Widths are are measured from the pin center line to leaf’s outer measured from the pin center line to the the leaf's outer edge. For the edge. For the most most economic economic method, method, unequal unequal open open width should a product of aa standard width; width should be be a product of standard hinge hinge width; however, however, unequal unequal leaves leaves with with nonstandard nonstandard widths widths are are also available. also available.
One ends of of the pin are are cold One or or both both ends the pin cold formed formed to to aa diameter diameter greater than than the theinside insidediameter diameterof ofthe theknuckle. knuckle.This This greater prevents axial movement. prevents axial movement. Pins Pinsspun spun at at both both ends ends are are most most commonly commonly specified specified for for tamper tamper proof proof application. application.
Spun Pin Pin Spun Both Ends Both Ends
1) leaf leaf width width
leaf leaf width width
open width width open
both ends spun spun pin pin both ends
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
205 205
Hinges
Mill Finish Finish -- Steel Mill Steel Continuous Continuous Hinges Hinges 1 Material Material Thickness Thickness
Open Open Width Width
Pin Pin Diameter Diameter
Knuckle Knuckle Length Length
Length Length
Material Material Thickness Thickness
Open Open Width Width
Pin Pin Diameter Diameter
Knuckle Knuckle Length Length
Length Length
S20764 520764
.025 .025
.75 .75
.062 .062
1/4 1/4
72" 72"
S53515 553515
.050 .050
3.50 3.50
.120 .120
1/2 1/2
72" 72"
S21064 521064
.025 .025
1.00 1.00
.062 .062
1/4 1/4
S21264 521264
.025 .025
1.25 1.25
.062 .062
1/4 1/4
72" 72"
S54015 554015
.050 .050
4.00 4.00
.120 .120
1/2 1/2
72" 72"
72" 72"
S61015 561015
.060 .060
1.06 1.06
.120 .120
1/2 1/2
72" 72"
S21564 521564
.025 .025
1.50 1.50
.062 .062
S30765 530765
.032 .032
.75 .75
.063 .063
1/4 1/4
72" 72"
S61215 561215
.060 .060
1.25 1.25
.120 .120
1/2 1/2
72" 72"
1/2 1/2
72" 72"
S6121596 56121596
.060 .060
1.25 1.25
.120 .120
1/2 1/2
96" 96"
S31065 531065
.032 .032
1.00 1.00
S31165 531165
.032 .032
1.06 1.06
.063 .063
1/2 1/2
72" 72"
S61515 561515
.060 .060
1.50 1.50
.120 .120
1/2 1/2
72" 72"
.063 .063
1/2 1/2
72" 72"
S6151596 56151596
.060 .060
1.50 1.50
.120 .120
1/2 1/2
96" 96"
S31265 531265 *
.032 .032
S31565 531565 *
.032 .032
1.25 1.25
.063 .063
1/2 1/2
72" 72"
S61715 561715
.060 .060
1.75 1.75
.120 .120
1/2 1/2
72" 72"
1.50 1.50
.063 .063
1/2 1/2
72" 72"
S62015 562015
.060 .060
2.00 2.00
.120 .120
1/2 1/2
72" 72"
S30784 530784 • S31084 531084 `
.035 .035
.75 .75
.086 .086
1/4 1/4
72" 72"
S6201596 56201596
.060 .060
2.00 2.00
.120 .120
1/2 1/2
96" 96"
.035 .035
1.06 1.06
.086 .086
1/4 1/4
72" 72"
S62515 562515
.060 .060
2.50 2.50
.120 .120
1/2 1/2
72" 72"
S3108496 53108496
.035 .035
1.06 1.06
.086 .086
1/4 1/4
96" 96"
S63015 563015
.060 .060
3.00 3.00
.120 .120
1/2 1/2
72" 72"
S31284 531284
.035 .035
1.25 1.25
.086 .086
1/4 1/4
72" 72"
S6301596 56301596
.060 .060
3.00 3.00
.120 .120
1/2 1/2
96" 96"
S3128496 53128496
.035 .035
1.25 1.25
.086 .086
1/4 1/4
96" 96"
S63515 563515
.060 .060
3.50 3.50
.120 .120
1/2 1/2
72" 72"
S31584 531584
.035 .035
1.50 1.50
.086 .086
1/4 1/4
72" 72"
S64015 564015
.060 .060
4.00 4.00
.120 .120
1/2 1/2
72" 72"
S3158496 53158496
.035 .035
1.50 1.50
.086 .086
1/4 1/4
96" 96"
S61211 561211
.060 .060
1.25 1.25
.120 .120
1 1
72" 72"
S31784 531784
.035 .035
1.75 1.75
.086 .086
1/4 1/4
72" 72"
S61511 561511
.060 .060
1.50 1.50
.120 .120
1 1
72" 72"
S32084 532084
.035 .035
2.00 2.00
.086 .086
1/4 1/4
72" 72"
S6151196 56151196
.060 .060
1.50 1.50
.120 .120
1 1
96" 96"
S41074 541074
.042 .042
1.06 1.06
.076 .076
1/4 1/4
72" 72"
S61711 561711
.060 .060
1.75 1.75
.120 .120
1 1
72" 72"
S41274 541274
.042 .042
1.25 1.25
.076 .076
1/4 1/4
72" 72"
S62011 562011
.060 .060
2.00 2.00
.120 .120
1 1
72" 72"
S41574 541574
.042 .042
1.50 1.50
.076 .076
1/4 1/4
72" 72"
S62511 562511
.060 .060
2.50 2.50
.120 .120
1 1
72" 72"
S42074 542074
.042 .042
2.00 2.00
.076 .076
1/4 1/4
72" 72"
S63011 563011
.060 .060
3.00 3.00
.120 .120
1 1
72" 72"
S41095 541095
.042 .042
1.06 1.06
.091 .091
1/2 1/2
72" 72"
S63511 563511
.060 .060
3.50 3.50
.120 .120
1 1
72" 72"
S41295 541295
.042 .042
1.25 1.25
.091 .091
1/2 1/2
72" 72"
S64011 564011
.060 .060
4.00 4.00
.120 .120
1 1
72" 72"
S41595 541595
.042 .042
1.50 1.50
.091 .091
1/2 1/2
72" 72"
S61517 561517
.060 .060
1.50 1.50
.187 .187
1/2 1/2
72" 72"
S4159596 54159596
.042 .042
1.50 1.50
.091 .091
1/2 1/2
96" 96"
S62017 562017
.060 .060
2.00 2.00
.187 .187
1/2 1/2
72" 72"
S42095 542095
.042 .042
2.00 2.00
.091 .091
1/2 1/2
72" 72"
S62517 562517
.060 .060
2.50 2.50
.187 .187
1/2 1/2
72" 72"
S51098 551098 *
.050 .050
1.06 1.06
.091 .091
5/8 5/8
72.5" 72.5"
S63017 563017
.060 .060
3.00 3.00
.187 .187
1/2 1/2
72" 72"
S51298 551298 *
.050 .050
1.25 1.25
.091 .091
5/8 5/8
72.5" 72.5"
S63517 563517
.060 .060
3.50 3.50
.187 .187
1/2 1/2
72" 72"
S51598 551598 *
.050 .050
1.50 1.50
.091 .091
5/8 5/8
72.5" 72.5"
S64017 564017
.060 .060
4.00 4.00
.187 .187
1/2 1/2
72" 72"
S52098 552098 *
.050 .050
2.00 2.00
.091 .091
5/8 5/8
72.5" 72.5"
S61518 561518
.060 .060
1.50 1.50
.187 .187
5/8 5/8
72.5" 72.5"
S52598 552598 *
.050 .050
2.50 2.50
.091 .091
5/8 5/8
72.5" 72.5"
S62018 562018
.060 .060
2.00 2.00
.187 .187
5/8 5/8
72.5" 72.5"
S53098 553098 *
.050 .050
3.00 3.00
.091 .091
5/8 5/8
72.5" 72.5"
S6201896 56201896
.060 .060
2.00 2.00
.187 .187
5/8 5/8
96.25" 96.25"
S51016 551016
.050 .050
1.06 1.06
.115 .115
5/16 5/16
72.187" 72.187"
S62518 562518
.060 .060
2.50 2.50
.187 .187
5/8 5/8
72.5" 72.5"
S51216 551216
.050 .050
1.25 1.25
.115 .115
5/16 5/16
72.187" 72.187"
S63018 563018
.060 .060
3.00 3.00
.187 .187
5/8 5/8
72.5" 72.5"
S51516 551516
.050 .050
1.50 1.50
.115 .115
5/16 5/16
72.187" 72.187"
S6301896 56301896
.060 .060
3.00 3.00
.187 .187
5/8 5/8
96.25" 96.25"
S52016 552016
.050 .050
2.00 2.00
.115 .115
5/16 5/16
72.187" 72.187"
S63518 563518
.060 .060
3.50 3.50
.187 .187
5/8 5/8
72.5" 72.5"
S52516 552516
.050 .050
2.50 2.50
.115 .115
5/16 5/16
72.187" 72.187"
S64018 564018
.060 .060
4.00 4.00
.187 .187
5/8 5/8
72.5" 72.5"
S53016 553016
.050 .050
3.00 3.00
.115 .115
5/16 5/16
72.187" 72.187"
S61519 561519
.060 .060
1.50 1.50
.187 .187
1 1
72" 72"
S51015 551015
.050 .050
1.06 1.06
.120 .120
1/2 1/2
72" 72"
S62019 562019
.060 .060
2.00 2.00
.187 .187
1 1
72" 72"
S51215 551215
.050 .050
1.25 1.25
.120 .120
1/2 1/2
72" 72"
S62519 562519
.060 .060
2.50 2.50
.187 .187
1 1
72" 72"
S51515 551515
.050 .050
1.50 1.50
.120 .120
1/2 1/2
72" 72"
S63019 563019 *
.060 .060
3.00 3.00
.187 .187
1 1
72" 72"
S52015 552015
.050 .050
2.00 2.00
.120 .120
1/2 1/2
72" 72"
S64019 564019 *
.060 .060
4.00 4.00
.187 .187
1 1
72" 72"
S5201596 55201596
.050 .050
2.00 2.00
.120 .120
1/2 1/2
96" 96"
S52515 552515
.050 .050
2.50 2.50
.120 .120
1/2 1/2
72" 72"
these hinges have staked these hinges have staked pins pins thesehinges hingesare are non-stock non-stock *these
S53015 553015
.050 .050
3.00 3.00
.120 .120
1/2 1/2
72" 72"
Part Number Part Number
Part Number Part Number
Request Info
206
Download Download 31:Immo @@www.spep.com www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial Industrial Hardware Hardware
Material Material Thickness Thickness
Open Open Width Width
Pin Pin Diameter Diameter
Knuckle Knuckle Length Length
Length Length
S1303296 51303296
.120 .120
3.00 3.00
.375 375
2
96" 96"
72"
S13532 513532
.120
3.50 3.50
.375 375
2
72" 72"
72"
S14032 514032
.120
4.00 4.00
.375 375
2
72" 72"
1 1
72" 72"
S1403296 51403296
.120 .120
4.00 4.00
.375 375
2 2
96" 96"
1 1
72"
S15032 515032
.120
5.00 5.00
.375 375
2 2
72" 72"
.250 .250
1
72"
S1503296 51503296
.120
5.00 5.00
.375 375
2 2
96" 96"
.187 .187
1/2
72" 72"
S16032 516032
.120 .120
6.00 6.00
.375 375
2 2
72" 72"
2.00 2.00
.187 .187
1/2
72" 72"
S13052 513052
.180 .180
3.00 3.00
.500 500
2 2
72" 72"
2.50 2.50
.187
1/2 1/2
72"
S14052 514052
.180 .180
4.00 4.00
.500 .500
2 2
72" 72"
.074 .074
3.00 3.00
.187
1/2 1/2
72" 72"
S15052 515052
.180 .180
5.00 5.00
.500 .500
2 2
72" 72"
.074
4.00 4.00
.187
1/2 1/2
72"
S16052 516052
.180 .180
6.00 6.00
.500 .500
2 2
72" 72"
S71511 571511
.074
1.50 1.50
.187 .187
1
72"
S17052 517052
.180 .180
7.00 7.00
.500 500
22
72" 72"
S72011 572011
.074 .074
2.00 2.00
.187
1 1
72" 72"
S18052 518052
.180 .180
8.00 8.00
.500 500
22
72" 72"
S7201196 57201196
.074 .074
2.00 2.00
.187 .187
1 1
96" 96"
= new •= new
S72511 572511
.074
2.50 2.50
.187
1
72"
S73011 573011
.074 .074
3.00 3.00
.187
1 1
72" 72"
S74011 574011
.074
4.00 4.00
.187
1 1
72"
S71521 571521
.074
1.50 1.50
.250 .250
1
72"
S72021 572021
.074 .074
2.00 2.00
.250 .250
1 1
72" 72"
S7202196 57202196
.074
2.00 2.00
.250 .250
1 1
96" 96"
S72521 572521
.074
2.50 2.50
.250 .250
1
72"
S7252196 57252196
.074 .074
2.50 2.50
.250 .250
1 1
96" 96"
S73021 573021
.074
3.00 3.00
.250 .250
1 1
72"
S7302196 57302196
.074 .074
3.00 3.00
.250 250
1 1
96" 96"
S73521 573521
.074 .074
3.50 3.50
.250 .250
1 1
72" 72"
S74021 574021
.074
4.00 4.00
.250 .250
1 1
72" 72"
S74521 574521
.074
4.50 4.50
.250 .250
1
72"
S75021 575021
.074 .074
5.00 5.00
.250 .250
1 1
72" 72"
S91521 591521 *
.090 .090
1.50 1.50
.250 .250
1 1
72"
S92021 592021
.090 .090
2.00 2.00
.250 250
11
72"
S92521 592521
.090 .090
2.50 2.50
.250 .250
1 1
S93021 593021
.090 .090
3.00 3.00
.250 .250
S93521 593521
.090 .090
3.50 3.50
S94021 594021
.090 .090
S12022 512022
.120
S1202296 51202296
.120
S12522 512522 *
.120 .120
S13022 513022 S1302296 51302296
Material Material Thickness
Open Open Width Width
Pin Pin Diameter Diameter
Knuckle Knuckle Length Length
Length Length
S61521 • 561521
.060 .060
1.50 1.50
.250 .250
1 1
72" 72"
S62021 • 562021
.060 .060
2.00 2.00
.250 .250
1 1
S62521 562521 •
.060 .060
2.50 2.50
.250 .250
1 1
S63021 563021 •
.060 .060
3.00 3.00
.250 .250
S63521 563521 •
.060 .060
3.50 3.50
.250 .250
S64021 564021 •
.060 .060
4.00 4.00
S71515 * 571515
.074 .074
1.50 1.50
S72015 572015 *
.074
S72515 572515 *
.074
S73015 573015 * S74015 574015 *
Part Part Number Number
Part Number Part Number
are non-stock these hinges are * these non-stock
Sizes Available Other Sizes Other Available Upon Upon Request Request Material Material Thickness Thickness
Range of Range of Open Open Width Width
Pin Diameter Pin Diameter
Knuckle Length Length
.020 .020
.75 -- 2.00 .75 2.00
.072 .072
.250 .250
.030 .030
.75 -- 2.00 .75 2.00
.086 .086
.250 .250
.050 .050
1.00 -- 6.00 1.00 6.00
.125
.500 .500
.060 .060
1.00 -- 6.00 1.00 6.00
.125
.625 .625
.060 .060
1.25 -- 6.00 1.25 6.00
.187 .187
2.00 2.00
.060 .060
1.25 -- 7.00 1.25 7.00
.250 .250
2.00 2.00
.060 .060
1.25 - 7.00 7.00
.312
2.00 2.00
.074 .074
7.00 1.50 -- 7.00 150
.156 .156
1.00 1.00
.074 .074
1.50 -- 7.00 1.50 7.00
.156 .156
1.50 1.50
.074 .074
2.00 -- 4.00 2.00 4.00
.187 .187
2.00 2.00
.074 .074
2.00 -- 5.00 2.00 5.00
.250 .250
2.00 2.00
.090 .090
7.00 1.50 -- 7.00 1.50
.187
1.00 1.00
.090 .090
7.00 1.50 -- 7.00 150
.187
2.00 2.00
72" 72"
.090 .090
1.50 -- 7.00 1.50 7.00
.250 .250
2.00 2.00
1 1
72" 72"
.090 .090
1.50 -- 7.00 1.50 7.00
.312 .312
1.00 1.00
.250 .250
1
72"
.090 .090
1.50 -- 7.00 1.50 7.00
.312 .312
2.00 2.00
4.00 4.00
.250 .250
1 1
72" 72"
.090 .090
2.00 -- 5.00 2.00 5.00
.250 .250
2.00 2.00
2.00 2.00
.250 .250
22
72"
.090 .090
2.00 -- 7.00 2.00 7.00
.375 .375
1.00 1.00
2.00 2.00
.250 250
2
96" 96"
.120 .120
2.00 -- 5.00 2.00 5.00
.375 .375
2.00 2.00
2.50 2.50
.250 .250
22
72" 72"
.120 .120
2.00 -- 6.00 2.00 6.00
.250 .250
2.00 2.00
.120
3.00 3.00
.250 .250
2 2
72" 72"
.105 .105
2.00 -- 8.00 2.00 8.00
.250 .250
2.00 2.00
.120
3.00 3.00
.250 .250
2 2
96" 96"
.105 .105
2.00 -- 8.00 2.00 8.00
.375
2.00 2.00
.120 .120
2.00 -- 8.00 2.00 8.00
.312 .312
2.00 2.00
.188 .188
3.00 -- 8.00 3.00 8.00
.500 .500
2.00 2.00
S14022 514022
.120 .120
4.00 4.00
.250 .250
22
72" 72"
S1402296 51402296
.120
4.00 4.00
.250 .250
2 2
96" 96"
S15022 515022 *
.120 .120
5.00 5.00
.250 250
2
72" 72"
S16022 516022 *
.120 .120
6.00 6.00
.250 .250
22
72" 72"
S12032 512032
.120 .120
2.00 2.00
.375 .375
2 2
72" 72"
S12532 512532
.120
2.50 2.50
.375 375
2 2
72"
S13032 513032
.120 .120
3.00 3.00
.375 375
2 2
72" 72"
Hinges
Finish -- Steel Mill Finish Mill Steel Continuous Continuous Hinges Hinges
can be times can lead times and lead sufficientand are sufficient quantitiesare thequantities thatthe providing that be extended, extended, Iproviding is: Sierra Pacific Pacificcan canprovide provideyou you with with aa hinge hinge that that is: assembled reversed assembled I reversed length to length cutto I cut painted I painted perforated I perforated plated I plated swaged I swaged etc… I etc... offset I offset formed I formed Request Info
1-800-453-1692
800.433.5554 Order: To ToPlace Place Order ( 800.433.5554
www.aboveboardelectronics.com
[email protected] [email protected]
207
Hinges
Mill Leaves and Mill Finish Finish--Stainless StainlessSteel Steel Continuous Continuous Hinges Hinges --302/304 302/304 Leaves and Pins Pins Part ! art Number Number
Material Open Pin Knuckle Pin Knuckle Material Open Thickness Width Diameter Diameter Length Length Thickness Width
Length Length
Material Open Pin Knuckle Pin Knuckle Material Open Thickness Width Diameter Diameter Length Length Thickness Width
Length Length
SS20764 5520764
.025 .025
.75 .75
.062 .062
1/4 1/4
72" 72"
SS63017 5563017
.060 .060
3.00 3.00
.187 .187
1/2 1/2
SS21064 5521064
.025 .025
1.00 1.00
.062 .062
1/4 1/4
72" 72"
SS61518 5561518
.060 .060
1.50 1.50
.187 .187
5/8 5/8
72.5" 72.5"
SS30765 5530765
.030 .030
.75 .75
.066 .066
1/2 1/2
72" 72"
SS6151896 556151896
.060 .060
1.50 1.50
.187 .187
5/8 5/8
96.25" 96.25"
SS31065 5531065
.030 .030
1.00 1.00
.066 .066
1/2 1/2
72" 72"
SS62018 5562018
.060 .060
2.00 2.00
.187 .187
5/8 5/8
72.5" 72.5"
SS31165 5531165
.030 .030
1.06 1.06
.066 .066
1/2 1/2
72" 72"
SS6201896 556201896
.060 .060
2.00 2.00
.187 .187
5/8 5/8
96.25" 96.25"
SS31265 5531265
.030 .030
1.25 1.25
.066 .066
1/2 1/2
72" 72"
SS62518 5562518
.060 .060
2.50 2.50
.187 .187
5/8 5/8
72.5" 72.5"
SS31565 5531565
.030 .030
1.50 1.50
.066 .066
1/2 1/2
72" 72"
SS63018 5563018
.060 .060
3.00 3.00
.187 .187
5/8 5/8
72.5" 72.5"
SS30784 5530784.
.035 .035
.75 .75
.086 .086
1/4 1/4
72" 72"
SS6301896 556301896
.060 .060
3.00 3.00
.187 .187
5/8 5/8
96.25" 96.25"
SS31084A 5531084
.035 .035
1.06 1.06
.086 .086
1/4 1/4
72" 72"
SS61519 5561519
.060 .060
1.50 1.50
.187 .187
11
72" 72"
SS31284 I 5531284
.035 .035
1.25 1.25
.086 .086
1/4 1/4
72" 72"
SS62019 5562019
.060 .060
2.00 2.00
.187 .187
11
72" 72"
SS31584A 5531584
.035 .035
1.50 1.50
.086 .086
1/4 1/4
72" 72"
SS62519 5562519
.060 .060
2.50 2.50
.187 .187
11
72" 72"
SS32084 5532084
.035 .035
2.00 2.00
.086 .086
1/4 1/4
72" 72"
SS63019 5563019
.060 .060
3.00 3.00
.187 .187
11
72" 72"
SS41095 5541095
.042 .042
1.06 1.06
.091 .091
1/2 1/2
72" 72"
SS64019 5564019
.060 .060
4.00 4.00
.187 .187
11
72" 72"
SS4109596 554109596
.042 .042
1.06 1.06
.091 .091
1/2 1/2
96" 96"
SS61521 5561521
.060 .060
1.50 1.50
.250 .250
11
72" 72"
SS41295 5541295
.042 .042
1.25 1.25
.091 .091
1/2 1/2
72" 72"
SS62021 5562021
.060 .060
2.00 2.00
.250 .250
11
72" 72"
SS41595 5541595
.042 .042
1.50 1.50
.091 .091
1/2 1/2
72" 72"
SS62521 5562521
.060 .060
2.50 2.50
.250 .250
11
72" 72"
SS4159596 554159596
.042 .042
1.50 1.50
.091 .091
1/2 1/2
96" 96"
SS63021 5563021
.060 .060
3.00 3.00
.250 .250
11
72" 72"
SS42095 5542095
.042 .042
2.00 2.00
.091 .091
1/2 1/2
72" 72"
SS63521 5563521
.060 .060
3.50 3.50
.250 .250
11
72" 72"
SS51015 5551015
.050 .050
1.06 1.06
.120 .120
1/2 1/2
72" 72"
SS64021 5564021
.060 .060
4.00 4.00
.250 .250
11
72" 72"
SS51215 5551215
.050 .050
1.25 1.25
.120 .120
1/2 1/2
72" 72"
SS71515 5571515
.074 .074
1.50 1.50
.187 .187
1/2 1/2
72" 72"
SS51515 5551515
.050 .050
1.50 1.50
.120 .120
1/2 1/2
72" 72"
SS72015 5572015
.074 .074
2.00 2.00
.187 .187
1/2 1/2
72" 72"
SS52015 5552015
.050 .050
2.00 2.00
.120 .120
1/2 1/2
72" 72"
SS72515 5572515
.074 .074
2.50 2.50
.187 .187
1/2 1/2
72" 72"
SS52515 * 5552515
.050 .050
2.50 2.50
.120 .120
1/2 1/2
72" 72"
SS73015 5573015
.074 .074
3.00 3.00
.187 .187
1/2 1/2
72" 72"
SS53015 5553015
.050 .050
3.00 3.00
.120 .120
1/2 1/2
72" 72"
SS74015 5574015
.074 .074
4.00 4.00
.187 .187
1/2 1/2
72" 72"
SS53515 * 5553515
.050 .050
3.50 3.50
.120 .120
1/2 1/2
72" 72"
SS72011 5572011
.074 .074
2.00 2.00
.187 .187
11
72" 72"
SS54015 * 5554015
.050 .050
4.00 4.00
.120 .120
1/2 1/2
72" 72"
SS72511 5572511
.074 .074
2.50 2.50
.187 .187
11
72" 72"
SS61015 5561015
.060 .060
1.06 1.06
.120 .120
1/2 1/2
72" 72"
SS73011 5573011
.074 .074
3.00 3.00
.187 .187
11
72" 72"
SS61215 5561215
.060 .060
1.25 1.25
.120 .120
1/2 1/2
72" 72"
SS74011 5574011
.074 .074
4.00 4.00
.187 .187
11
72" 72"
SS61515 5561515
.060 .060
1.50 1.50
.120 .120
1/2 1/2
72" 72"
SS71521 5571521
.074 .074
1.50 1.50
.250 .250
11
72" 72"
SS6151596 556151596
.060 .060
1.50 1.50
.120 .120
1/2 1/2
96" 96"
SS72021 5572021
.074 .074
2.00 2.00
.250 .250
11
72" 72"
SS62015 5562015
.060 .060
2.00 2.00
.120 .120
1/2 1/2
72" 72"
SS7202196 557202196
.074 .074
2.00 2.00
.250 .250
11
96" 96"
SS6201596 556201596
.060 .060
2.00 2.00
.120 .120
1/2 1/2
96" 96"
SS72521 5572521
.074 .074
2.50 2.50
.250 .250
11
72" 72"
SS62515 5562515
.060 .060
2.50 2.50
.120 .120
1/2 1/2
72" 72"
SS7252196 557252196
.074 .074
2.50 2.50
.250 .250
11
96" 96"
SS63015 5563015
.060 .060
3.00 3.00
.120 .120
1/2 1/2
72" 72"
SS73021 5573021
.074 .074
3.00 3.00
.250 .250
11
72" 72"
SS6301596 556301596
.060 .060
3.00 3.00
.120 .120
1/2 1/2
96" 96"
SS7302196 557302196
.074 .074
3.00 3.00
.250 .250
11
96" 96"
SS63515 5563515
.060 .060
3.50 3.50
.120 .120
1/2 1/2
72" 72"
SS73521 5573521
.074 .074
3.50 3.50
.250 .250
11
72" 72"
SS64015 5564015
.060 .060
4.00 4.00
.120 .120
1/2 1/2
72" 72"
SS74021 5574021
.074 .074
4.00 4.00
.250 .250
11
72" 72"
SS61211 5561211
.060 .060
1.25 1.25
.120 .120
11
72" 72"
SS75021 5575021
.074 .074
5.00 5.00
.250 .250
11
72" 72"
SS61511 5561511
.060 .060
1.50 1.50
.120 .120
11
72" 72"
SS91521 5591521
.090 .090
1.50 1.50
.250 .250
11
72" 72"
SS61711 5561711
.060 .060
1.75 1.75
.120 .120
11
72" 72"
SS92021 5592021
.090 .090
2.00 2.00
.250 .250
11
72" 72"
SS62011 5562011
.060 .060
2.00 2.00
.120 .120
11
72" 72"
SS92521 5592521
.090 .090
2.50 2.50
.250 .250
11
72" 72"
SS62511 5562511
.060 .060
2.50 2.50
.120 .120
11
72" 72"
SS93021 5593021
.090 .090
3.00 3.00
.250 .250
11
72" 72"
SS63011 5563011
.060 .060
3.00 3.00
.120 .120
11
72" 72"
SS93521 5593521
.090 .090
3.50 3.50
.250 .250
11
72" 72"
SS63511 5563511
.060 .060
3.50 3.50
.120 .120
11
72" 72"
SS94021 5594021
.090 .090
4.00 4.00
.250 .250
11
72" 72"
SS64011 5564011
.060 .060
4.00 4.00
.120 .120
11
72" 72"
SS12022 5512022
.120 .120
2.00 2.00
.250 .250
2 2
72" 72"
SS61517 5561517
.060 .060
1.50 1.50
.187 .187
1/2 1/2
72" 72"
SS12522 5512522
.120 .120
2.50 2.50
.250 .250
2 2
72" 72"
SS62017 5562017
.060 .060
2.00 2.00
.187 .187
1/2 1/2
72" 72"
SS13022 5513022
.120 .120
3.00 3.00
.250 .250
2 2
72" 72"
SS62517 5562517
.060 .060
2.50 2.50
.187 .187
1/2 1/2
72" 72"
SS14022 5514022
.120 .120
4.00 4.00
.250 .250
2 2
72" 72"
= new
thesehinges hinges have have staked staked pins pins _these
208
Part Part Number Number
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
thesehinges hinges are are non-stock non-stock *these
72" 72"
Hinges and Industrial Industrial Hardware Hardware Hinges and
Mill1=11•1
Pins and Pins Leaves and 302/304 302/304 Leaves Part Number Number
SS12032 5512032
Material Thickness
Open Open Width
Pin Pin Diameter
Knuckle Length
Length Length
.120
2.00
.375
2
72"
Material Material Thickness
Open Open Width Width
Pin Diameter Diameter
Knuckle Knuckle Length
A5151596 A5151596
.050
1.50
.120
1/2 1/2
96"
.050
2.00 2.00
.120 .120
1/2
72"
.050 .050
2.50 2.50
.120
1/2 1/2
72"
3.00 3.00
.120
1/2 1/2
72"
Part Number Part Number
SS13032 5513032
.120
3.00
375 .375
2
72"
A52015 A52015
SS1303296 551303296
.120
3.00 3.00
.375
2
96" 96"
A52515 A52515*
SS14032 5514032
.120
4.00
.375
2
72"
SS15032 5515032
.120
5.00
.375
2
72"
SS16032 5516032
.120
6.00 6.00
.375
2
72"
SS18032 5518032
.120
8.00 8.00
.375
2
72"
Pins and Pins Leaves and 31655 Hinges Leaves 316SS Hinges
Length Length
A53015 A53015
.050
A53515 A53515*
.050 .050
3.50 3.50
.120
1/2 1/2
72"
A54015 * A54015
.050
4.00 4.00
.120
1/2
72"
A61015 A61015
.060 .060
1.06 1.06
.120
1/2 1/2
72"
1/2
72" 72"
A61215 A61215
.060
1.25
.120
A61515 A61515
.060 .060
1.50 1.50
.120
1/2 1/2
A6151596 A6151596
.060
1.50 1.50
.120
1/2
96" 96"
A62015 A62015
.060 .060
2.00 2.00
.120
1/2 1/2
72"
A6201596 A6201596
.060
2.00 2.00
.120
1/2
96" 96"
A62515 A62515
.060 .060
2.50 2.50
.120
1/2
72"
A63015 A63015
.060
3.00 3.00
.120
1/2
72"
A61211 A61211
.060 .060
1.25
.120
1
72"
1.50 1.50
.120
1
72"
Material Thickness
Open Open Width Width
Pin Pin Diameter Diameter
Knuckle Length Length
Length Length
SST41095 55T410951
.040
1.06
.091
1/2
72"
55T41295 SST41295 *
.040 .040
1.25
.091
1/2 1/2
72"
SST41595 * 55T41595
.040 .040
1.50
.091 .091
1/2 1/2
72"
SST42095 55T42095
.040
2.00
.091
1/2
72"
A61511 A61511
.060 .060
SST61515 55T61515
.060 .060
1.50 1.50
.120
1/2 1/2
72"
A62011 A62011
.060 .060
2.00 2.00
.120
1
72"
SST62015 55T62015
.060 .060
2.00 2.00
.120
1/2 1/2
72"
A62511 A62511
.060
2.50 2.50
.120
1
72"
SST62515 55T62515
.060
2.50
.120
1/2
72"
A63011 A63011
.060 .060
3.00 3.00
.120
1
72"
3.50 3.50
.120
1
72"
Part Number Number
SST63015 55T63015
.060 .060
3.00 3.00
.120
1/2 1/2
72"
A63511 * A63511
.060
SST72021 55T72021 *
.074
2.00 2.00
.250 .250
1.00 1.00
72"
A64011 A64011
.060 .060
4.00 4.00
.120
1
72"
96"
A71515 A71515*
.074
1.50 1.50
.187
1/2
72"
A72015 A72015
.074
2.00 2.00
.187
1/2
72"
A72515 A72515
.074
2.50 2.50
.187
1/2
72"
A73015 A73015
.074
3.00 3.00
.187 .187
1/2
72"
A73515 A73515
.074
3.50 3.50
.187
1/2
72"
A74015 A74015
.074
4.00 4.00
.187
1/2
72"
A71521 A71521 *
.074
1.50 1.50
.250
1
72" 72"
SST7202196 55T72021961
.074
2.00
.250 .250
1.00
55T73021 SST73021 *
.074
3.00 3.00
.250 .250
1.00 1.00
72"
SST7302196 * 55T7302196
.074
3.00
.250 .250
1.00 1.00
96"
* these non-stock these hinges are non-stock
these hinges have staked pins pins
Continuous Hinges Aluminum Hinges Aluminum Continuous
Pin Mill Hard Aluminum Aluminum Pin Leaves - Full Hard Equal Leavesfinish -- Equal Mill finish Part Number Part Number
A20764 A * A20764 A21064 •* A21064
Material Thickness Thickness .025 .025 .025 .025
Open Open Width Width
.75 1.00
Pin Pin Diameter Diameter
Knuckle Length Length
Length Length
.062 .062
1/4 1/4
72" 72"
.062 .062
1/4 1/4
A72021 A72021
.074
2.00 2.00
.250
1
A72521 A72521 *
.074
2.50 2.50
.250 .250
1
72"
A73021 A73021 *
.074
3.00 3.00
.250 .250
1
72"
A74021 A74021 *
.074
4.00 4.00
.250 .250
1
72"
1
72"
A30765 A30765*
.032 .032
.75 .75
.062 .062
1/2 1/2
72"
A92021 A92021
.093
2.00 2.00
.250 .250
A31065 A31065*
.032 .032
1.00
.062 .062
1/2 1/2
72"
A92521 A92521
.093
2.50 2.50
.250
1
72"
A31165 * A31165
.032
1.06 1.06
.062 .062
1/2 1/2
72"
A93021 A93021
.093
3.00 3.00
.250 .250
1
72"
72"
A9302196 A9302196
.093
3.00 3.00
.250 .250
1
96" 96"
.250 .250
1
72"
A31265 A31265*
.032 .032
1.25
.062 .062
1/2 1/2
A31565 A31565*
.032 .032
1.50
.062 .062
1/2 1/2
72"
A93521 A93521 *
.093
3.50 3.50
A41084 • A41084
.040 .040
1.06
.080 .080
1/4 1/4
72"
A94021 A94021
.093
4.00 4.00
.250
1
72"
A41284 A A41284
.040 .040
1.25
.080 .080
1/4
72"
A94521 A94521 *
.093
4.50 4.50
.250
1
72"
72"
A95021 A95021 *
.093
5.00 5.00
.250 .250
1
72"
72"
A12022 A12022
.120 .120
2.00 2.00
.250 .250
2
72"
A41584 A A41584
.040 .040
1.50
.080 .080
1/4 1/4
A41095 A41095
.040 .040
1.06
.091 .091
1/2 1/2
A4109596 A4109596
.040 .040
1.06
.091 .091
1/2 1/2
96"
A1202296 A1202296
.120
2.00 2.00
.250 .250
2
96" 96"
A41295 A41295
.040
1.25
.091 .091
1/2 1/2
72"
A13022 A13022
.120
3.00 3.00
.250
2
72"
A41595 A41595
.040 .040
1.50
.091 .091
1/2 1/2
72"
A1302296 A1302296
.120
3.00 3.00
.250
2
96" 96"
4.00 4.00
.250 .250
2
72"
A4159596 A4159596
.040 .040
1.50
.091 .091
1/2 1/2
96" 96"
A14022 A14022
.120
A42095 A42095
.040 .040
2.00
.091 .091
1/2 1/2
72"
A1402296 A1402296
.120
4.00 4.00
.250 .250
2
96" 96"
A51015 A51015
.050 .050
1.06
.120
1/2 1/2
72"
A13032 A13032
.120
3.00 3.00
.375 .375
2
72"
.120
1/2 1/2
72"
A14032 A14032
.120
4.00 4.00
.375
2
72"
72"
A15032 A15032
.120
5.00
.375
2
72"
A51215 * A51215 A51515 A51515
.050 .050
.050
1.25 1.50
.120
1/2
these hinges have staked staked pins pins Request Info
1-800-453-1692
* these these hinges are non-stock
[email protected] 800.433.5554 I.
[email protected] To PlaceOrder: Orden ta 800.4335554 To Place
www.aboveboardelectronics.com
Hinges
Stainless Steel Mill Steel Continuous Continuous Hinges Hinges Finish -- Stainless Mill Finish
209
Hinges
SIERRA PACIFIC ENGINEERING AND PRODUCTS col 4:1)
Continuous Hinges Continuous Hinges with with Holes Holes
Coined Countersunk Mill Continuous Hinges Hinges with with Coined Countersunk Holes Holes Finish Continuous Mill Finish .50" knuckles have .50" hinges have centers -- All 2.00" centers on 2.00" leaves on both leaves Holes on both All hinges knuckles -- Pins Pins not not staked staked
C
•
Hinges Continuous Hinges 302/304SSContinuous 302/30455
Cold Rolled Cold Rolled Steel Steel Continuous Continuous Hinges Hinges Open Material Open Part iiimpkiaterial
Pin Pin Diameter Width Diameter Thickness Width Number Thickness Number
Size Hole Size Hole ±.005 ±.005
Length Length
Pin Pin Open Part Number Material Material Open Part Number Diameter Thickness Thickness Width Width Diameter
Size Hole Size Hole ±.005 ±.005
Length Length
S410-30 5410-30
.040 .040
1.06 1.06
.091 .091
30.00 30.00
SS410-12 55410-12
.040 .040
1.06 1.06
.091 .091
12.00 12.00
S410-48 5410-48
.040 .040
1.06 1.06
.091 .091
48.00 48.00
SS410-30 55410-30
.040 .040
1.06 1.06
.091 .091
30.00 30.00
72.00 72.00
SS410-72 55410-72
.040 .040
1.06 1.06
.091 .091
72.00 72.00
48.00 48.00
SS412-36 55412-36
.040 .040
1.25 1.25
.091 .091
72.00 72.00
SS412-72 5S412-72
.040 .040
1.25
.091 .091
SS415-30 55415-30
.040 .040
1.50 1.50
.091 .091
36.00 Ø.181 hole 0.181 hole 72.00 countersunk 72.00 countersunk for for aa#4 #4F.H.S. F.H.S.30.00 30.00
SS415-72 55415-72
.040 .040
1.50 1.50
.091 .091
72.00 72.00
SS420-36 55420-36
.040 .040
2.00 2.00
.091 .091
36.00 36.00
SS420-72 55420-72
.040 .040
2.00 2.00
.091 .091
72.00 72.00
SS612-36 55612-36
.060 .060
1.25
.120 .120
36.00 36.00
SS612-72 55612-72
.060 .060
1.25
.120
72.00 72.00
SS615-12 55615-12
.060 .060
1.50 1.50
.120
12.00 12.00
SS615-36 55615-36
.060 .060
1.50 1.50
.120 .120
36.00 36.00
S410-72 5410-72
.040 .040
1.06 1.06
.091 .091
S412-48 5412-48
.040 .040
1.25 1.25
.091 .091
Ø.181 hole 0.181 hole countersunk countersunk F.H.S. #4 F.H.S. for for aa #4
36.00
S412-72 5412-72
.040 .040
1.25 1.25
.091 .091
S415-30 5415-30
.040 .040
1.50 150
.091 .091
S415-72 5415-72
.040 .040
1.50 1.50
.091 .091
72.00 72.00
S420-72 5420-72
.040 .040
2.00 2.00
.091 .091
72.00 72.00
S612-30 5612-30
.060 .060
1.25
.120
30.00 30.00
S612-48 5612-48
.060 .060
1.25 125
.120
48.00 48.00
S612-72 5612-72
.060 .060
1.25 1.25
.120
72.00 72.00
S615-48 5615-48
.060 .060
1.50 1.50
.120
48.00 48.00
S615-72 5615-72
.060 .060
1.50 150
.120
72.00 72.00
SS615-72 55615-72
.060 .060
1.50 1.50
.120
S620-30 5620-30
.060 .060
2.00 2.00
.120
30.00 30.00
SS620-12 55620-12
.060 .060
2.00 2.00
.120
S620-48 5620-48
.060 .060
2.00 2.00
.120
48.00 48.00
SS620-30 55620-30
.060 .060
2.00 2.00
.120 .120
S620-72 5620-72
.060 .060
2.00 2.00
.120
72.00 72.00
SS620-48 55620-48
.060 .060
2.00 2.00
.120
S625-48 5625-48
.060 .060
2.50 250
.120
48.00 48.00
SS620-72 55620-72
.060 .060
2.00 2.00
.120
72.00 72.00
S625-72 5625-72
.060 .060
2.50 250
.120
72.00 72.00
SS630-12 55630-12
.060 .060
3.00 3.00
.120 .120
12.00 12.00
S630-48 5630-48
.060 .060
3.00 3.00
.120
48.00 48.00
SS630-36 55630-36
.060 .060
3.00 3.00
.120
36.00 36.00
3.00 3.00
.120
72.00 72.00
SS630-72 55630-72
.060 .060
3.00 3.00
.120
72.00 72.00
S630-72 5630-72
.060 .060
30.00 30.00
Ø.220 hole 0.220 hole countersunk countersunk for aa #5 for #5 or or F.H.S. #6 #6 F.H.S.
Ø.220 hole 0.220 hole countersunk countersunk #5 or for a #5 fora or F.H.S. #6 #6 F.H.S.
72.00 72.00 12.00 12.00 30.00 30.00 48.00 48.00
Aluminum Aluminum Thickness MaterialThickness Material
Open Width Open Width
Pin Diameter Pin Diameter
Hole Hole Size Size ±.005 ±.005
A410-72 A410-72
.040 .040
1.06 1.06
.091 .091
A412-72 A412-72
.040 .040
1.25 1.25
.091 .091
A415-72 A415-72
.040 .040
1.50 1.50
.091 .091
Ø.170 hole 0.170 hole countersunk countersunk F.H.S. #4 F.H.S. for for aa #4
A615-36 A615-36
.060 .060
1.50 1.50
.120
A615-72 A615-72
.060 .060
1.50 1.50
.120
A620-48 A620-48
.060 .060
2.00 2.00
.120
A620-72 A620-72
.060 .060
2.00 2.00
.120
A630-72 A630-72
.060 .060
3.00 3.00
.120
Part Part Number Number
offset / offset formed I formed
assembled reverse assembled I reverse plated I plated
Request Info
210 210
www.spep.com Download Download 3DMoons @@www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
72.00 72.00 72.00 72.00 72.00 72.00 36.00 36.00
Ø.200 hole 0.200 hole countersunk countersunk F.H.S. #5F.H.S. for aa #5 for
72.00 72.00 48.00 48.00 72.00 72.00 72.00 72.00
is: Pacific can Sierra Pacific extended,Sierra beextended, canbe timescan leadtimes andlead sufficientand aresufficient quantities I providing are can provide provide you you with with aa hinge hinge that that is: thatquantities providingthat length to length cutto I cut perforated I perforated etc… I etc...
Length Length
► swaged swaged ► painted painted
Hinges and Him--end Industrial Industri -1 Hardware
Hinges
Continuous Hinges Continuous Hinges with with Holes Holes Stainless Steel Steel Continuous Continuous Hinges Hinges with with Holes Stainless Holes
•
fD
302/304SS Hand Polished Polished-- Drilled Drilled Countersunk Countersunk Holes 302/30455 --Hand Holes Part Part Number Number
Material Material Thickness Thickness
Open Open Width Width
Pin Pin Diameter Diameter
Knuckle Knuckle Length Length
MSS410 MSS410
.040 .040
1.06 1.06
.091 .091
.50 .50
MSS412 MSS412
.040 .040
1.25 1.25
.091 .091
.50 .50
MSS415 MSS415
.040 .040
1.50 1.50
.091 .091
.50 .50
MSS420 MSS420
.040 .040
2.00 2.00
.091 .091
.50 .50
MSS615 MSS615
.060 .060
1.50 1.50
.120 .120
.50 .50
MSS620 MSS620
.060 .060
2.00 2.00
.120 .120
.50 .50
MSS630 MSS630
.060 .060
3.00 3.00
.120 .120
.50 .50
Hole Hole Size Size
Length Length
Notes
72.00 72.00
302/304SS leaves ►302/304SS leaves and and pin pin pinsecurely securely staked staked in in place I pin place deeply drilled drilled countersunk I deeply countersunk holes holes on on 2.00" 2.00r centers centers topside side and and knuckle knuckle I top polished polished to to a a high high luster luster packaged to to prevent prevent I packaged scratching in in transit scratching transit
Length Length
Notes Notes
72.00 72.00
all details details as as above, I all above, except except these hinges hingesare aremill mill finish finish these (not (not polished polished or or degreased). degreased).
Ø.181 hole 0.181 hole countersunk countersunk for aa #5 #5F.H.S. F.H.S. for Ø.211 hole 0.211 hole countersunk countersunk for aa #6 #6F.H.S. F.H.S. for Ø.181 hole 0.181 hole countersunk countersunk for aa #6 #6F.H.S. F.H.S. for
302/304SS Mill -- Drilled Drilled Countersunk 302/30455 --Mill Countersunk Holes Holes Part Number
Material Open Pin Knuckle Pin Knuckle Thickness Width Diameter Diameter Length Length MT
MSS410M MSS410M
.040 .040
1.06 1.06
.091 .091
.50 .50
MSS412M MSS412M
.040 .040
1.25 1.25
.091 .091
.50 .50
MSS415M MSS415M
.040 .040
1.50 1.50
.091 .091
.50 .50
MSS420M MSS420M
.040 .040
2.00 2.00
.091 .091
.50 .50
MSS615M MSS615M
.060 .060
1.50 1.50
.120 .120
.50 .50
MSS620M MSS620M
.060 .060
2.00 2.00
.120 .120
.50 .50
MSS630M MSS630M
.060 .060
3.00 3.00
.120 .120
.50 .50
Hole Hole Size Size Ø.181 hole 0.181 hole countersunk countersunk for a#5 #5F.H.S F.H.S fora Ø.211 hole 0.211 hole countersunk countersunk for aa #6 #6F.H.S. F.H.S. for Ø.181 hole 0.181 hole countersunk countersunk for aa #6 #6F.H.S. F.H.S. for
Premium Premium Finish Finish Steel Steel Continuous Continuous Hinges Hinges with with Countersunk Countersunk Holes Holes Part Numbers Open Widths 1.06" 1.06"
NPSL41094 NP5L41094
BPSL41094 BPSL41094 •
1.25" 1.25"
1.50" 1.50"
2.00" 2.00
Screw Screw Size Size
NP5L41294 NPSL41294
NP5L41594 NPSL41594
NPSL42094 NP5L42094
#4 #4
NPSL41295 NP5L41295
NPSL41595 NP5L41595
NPSL42095 NP5L42095
#5 #5
NPSL41596 NP5L41596
NPSL42096 NP5L42096
#6 #6
BPSL41294 BPSL41294 •
BPSL41594 BP5L41594
BPSL42094 BP5L42094
#4 #4
BPSL41295 BP5L41295
BPSL41595 BP5L41595
BPSL42095 BP5L42095
#5 #5
BPSL41596 BP5L41596
BPSL42096 BP5L42096
#6 #6
leaf thickness thickness .040'; .040", pre-plated cold rolled rolled steel I leaf pre-plated cold steel pindiameter diameter.091'; .091", galvanized galvanized pin pin staked staked in in place I pin place knuckle length length .50" .50" I knuckle
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Finish Finish NICKEL NICKELPREMIUM PREMIUM GRADE GRADE topside side high high luster luster I top bottomside side dull dull I bottom bothsides sides lacquered lacquered I both BRASS, GRADE, BRIGHT BRIGHT BRASS, PREMIUM PREMIUM GRADE, topside side high high luster luster I top bottomside side satin satin I bottom bothsides sides lacquered lacquered I both
stock lengths lengthsshown shownare are 72.00r 72.00" long I stock long coinedcountersunk countersunkholes holeson on2.00r 2.00" centers centers for for flat flat head screws I coined head screws indicates stock stock item • indicates item
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
211 211
Hinges
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Continuous and Continuous and Stop Stop Hinges Hinges _
Pre-plated Pre-plated Electro-Galvanized Electro-Galvanized Hinges Hinges Pins -- No Galvanized Pins No Staking Staking -- No No Holes Holes --Degreased Degreased Galvanized
Material Material Thickness Thickness
Open Open Width Width
Pin Pin Diameter Diameter
Knuckle Knuckle Length Length
Length Length
G41595 G41595
.040 .040
1.50 1.50
.091 .091
1/2 1/2
72.00 72.00
G42095 G42095
.040 .040
2.00 2.00
.091 .091
1/2 1/2
72.00 72.00
G61515 G61515
.060 .060
1.50 1.50
.120 .120
1/2 1/2
72.00 72.00
G62015 G62015
.060 .060
2.00 2.00
.120 .120
1/2 1/2
72.00 72.00
G63015 G63015
.060 .060
3.00 3.00
.120 .120
1/2 1/2
72.00 72.00
Part Part Number Number
Pins Pins for for Continuous Continuous Hinges Hinges Material Material
Pin Pin Diameter Diameter
Length Length
091X72B 091X72B
brass brass
.091 .091
72.00 72.00
091X72SS 091X72SS
304SS 304SS
.091 .091
72.00 72.00
120X72B 120X72B
brass brass
.120 .120
72.00 72.00
120X72SS 120X7255
304SS 304SS
.120 .120
72.00 72.00
187X72B 187X72B
brass brass
.187 .187
72.00 72.00
187X72SS 187X7255
304SS 304SS
.187 .187
72.00 72.00
250X72B 250X72B
brass brass
.250 .250
72.00 72.00
250X72SS 250X7255
304SS 304SS
.250 .250
72.00 72.00
375X72B 375X72B
brass brass
.375 .375
72.00 72.00
375X72SS 375X7255
304SS 30455
.375 .375
72.00 72.00
500X72B 500X72B
brass brass
.500 .500
72.00 72.00
500X72SS 500X7255
304SS 304SS
.500 .500
72.00 72.00
Part Part Number Number
available lengths available customlengths I custom
Continuous Stop Continuous Stop Hinges Hinges
Stock Item Stock Item Stop Knuckle Pin Knuckle Open Material Part Part Material Open Pin Stop Specifications LengthSpecifications Diameter Length Width Diameter Thickness Width Number Number Thickness
CS1050 CS1050
.035 Steel .035 Steel
1.060 1.060
.086 steel .086 steel
1/4 1/4
outside outside stop stop 90° ±3° 90° ±3°
items order Items special order are special hingesare stophinges inside stop I inside
& stop arc & operating operating arc stop angle angle
„..------
arc operating operating arc
/ stop stop angle angle
I or flat, 180° or the 180° from the outside hinges normally normally operate operate from flat, open open outside stop stop hinges 3°. minus 3°. or minus plus or specific angle at aa specific position, position, stopping stopping at angle plus
212 212
www.spep.com @ www.spep.com Download Download 3Dmoons @
0° or the 0° from the inside hinges normally normally operate operate from or closed closed inside stop stop hinges 3°. minus 3°. or minus plus or specific angle at aa specific position, position, stopping stopping at angle plus
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Length Length 72.00 72.00
Hinges and Industrial Hardware
Leaf Leaf Material Material
Pin Pin Material Material
S51315-01 551315-01
pre-electro galvanized pre-electro galvanized steel steel
302/304SS 302/304SS
SS51315-01 5551315-01
302/304SS 302/304SS
302/304SS 302/304SS
may also also be be stocked stocked in in lengths shown I may lengths other other than than shown shipped assembled assembled I shipped
.120 3.05 PIN PIN 0.120[3.05] 72.00 72.00[ 1828.8 1828.8 ]
.69 17.5 .69[17.5]
Hinges
Continuous Hinges Hinges for for Enclosure Enclosure Cabinet Continuous Cabinet Part Part Number Number
.050 1.27 THK. THK. -4-.050[1.27]
1
1.38 34.9 1.38[34.9] .031 OFFSET .031[ .79 .79] OFFSET BOTH LEAVES LEAVES BOTH END VIEW VIEW END FORMED FORMED
FRONT VIEW FRONT VIEW IN IN FLAT FLAT
Continuous Hinges Hinges with with special special Paint Paint Clearance Clearance Continuous Part Part Number Number
Leaf Leaf Material Material
Pin Pin Material Material
S62211-01 562211-01
pre-electro galvanized pre-electro galvanized steel steel
302/304SS 302/304SS
SS62211-01 5562211-01
302/304SS 302/304SS
302/304SS 302/304SS
shipped unassembled unassembled I shipped may also also be be stocked stocked in in lengths shown I may lengths other other than than shown
.031 .79 .031 [.79] OFFSET OFFSET .210 5.35 TYP. TYP. .210 [5.35] WITH SPECIAL WITHSPECIAL SP PAINT CLEARANCE CLEARANCE PAINT
y
.88 22.2 .88[22.2] i73
.75 19.1 .75 [19.1]
T1
special paint paintclearance clearanceallows allows for for primer I special primer coat coat plus plus aa finish finish coat coat
.120 3.05 PIN PIN 0.120[3.05] 1.38 34.9 1.38[34.9]
.060 1.52 .060 [1.52 THICK THICK
7
7_
.58 14.7 .58 [14.7] REF. REF.
FORMED FORMED END VIEW VIEW END
FRONT VIEW VIEW FRONT IN FLAT FLAT IN
Continuous Hinges Hinges for for Enclosure Enclosure Cabinet Continuous Cabinet Part Part Number Number
Leaf Leaf Material Material
Pin Pin Material Material
S72221-01 572221-01
pre-electro galvanized pre-electro galvanized steel steel
302/304SS 302/304SS
SS72221-01 5572221-01
302/304SS 302/304SS
302/304SS 302/304SS
A72221-01 A72221-01
aluminum aluminum
aluminum aluminum
may also also be be stocked stocked in in lengths shown I may lengths other other than than shown shipped unassembled unassembled I shipped
72.00 1828.8 72.00 [1828.8]
_
.03 .8 .03 [.8] OFFSET OFFSET
1.00 25.4 1.00 [25.4]
-
L/ (LI --7- '1
-
1
.77 19.4 .77 [19.4]
.250 6.35 L 0.250[6.35]
1.30 32.9 1.30 [32.9]
FRONT VIEW FRONT VIEW IN FLAT FLAT IN
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.072 .0721.83 1.8317 THICK THICK
.50 12.7 .50 [12.7] REF. REF.
FORMED FORMED END VIEW VIEW END
To Place 800.433.555411111
[email protected] To PlaceOrder: Order ta 800.433.5554
[email protected]
213 213
Hinges
Spring Finish Spring Loaded Loaded Hinges Hinges -- Mill Mill Finish
r
C
spring loaded spring loaded open open
spring loaded loaded closed closed spring
Material Material
Material Material Thickness Thickness
Open Open Width Width
Length Length
Pin Pin Diameter Diameter
Hole Hole Size Size
Spring Action Spring Action
BH5015 BH5015
steel steel
.025 .025
.750 .750
1.250 1.250
.066 .066
n/a n/a
closed closed
BH5015SS BH5015SS
304SS 304SS
.025 .025
.750 .750
1.250 1.250
.066 .066
n/a n/a
closed closed
BH5022 BH5022
steel steel
.025 .025
.750 .750
1.250 1.250
.066 .066
n/a n/a
open open
BH5022SS BH5022SS
304SS 304SS
.025 .025
.750 .750
1.250 1.250
.066 .066
n/a n/a
open open
BH5022ZN01 BH5022ZNO1
steel steel
.025 .025
.750 .750
1.250 1.250
.066 .066
.130 .130
open open
BH5022SS01 BH5022SSO1
304SS 304SS
.025 .025
.750 .750
1.250 1.250
.066 .066
.130 .130
open open
BH5020 BH5020
steel steel
.035 .035
1.063 1.063
1.250 1.250
.091 .091
#3 #3
closed closed
BH502001 BH502001
304SS 304SS
.035 .035
1.063 1.063
1.250 1.250
.091 .091
#3 #3
reverse assembled* reverse assembled*
BH5030 BH5030
steel steel
.035 .035
1.063 1.063
2.000 2.000
.091 .091
n/a n/a
open open
BH5030SS01 BH5030SSO1
304SS 304SS
.035 .035
1.250 1.250
2.000 2.000
.091 .091
#3 #3
closed closed
BH5024 BH5024
steel steel
.035 .035
1.500 1.500
1.750 1.750
.091 .091
n/a n/a
open open
BH5024SS BH5024SS
304SS 304SS
.035 .035
1.500 1.500
1.750 1.750
.091 .091
n/a n/a
open open
BH5024ZN01 BH5024ZNO1
steel steel
.035 .035
1.500 1.500
1.750 1.750
.091 .091
.158 .158
open open
BH5024SS01 BH5024SSO1
304SS 304SS
.035 .035
1.500 1.500
1.750 1.750
.091 .091
.158 .158
open open
BH5031SS BH5031SS
304SS 304SS
.035 .035
1.500 1.500
2.000 2.000
.091 .091
.141 .141
open open
BH5033 BH5033
steel steel
.039 .039
1.062 1.062
1.250 1.250
.091 .091
.130 .130
open open
BH5034ZN01 BH5034ZNO1
steel steel
.039 .039
1.000 1.000
2.000 2.000
.091 .091
.146 .146
closed closed
BH5034SS01 BH5034SSO1
304SS 304SS
.039 .039
1.000 1.000
2.000 2.000
.091 .091
.146 .146
closed closed
BH5035ZN01 BH5035ZNO1
steel steel
.039 .039
1.000 1.000
2.000 2.000
.091 .091
.146 .146
open open
BH5035SS01 BH5035SSO1
304SS 304SS
.039 .039
1.000 1.000
2.000 2.000
.091 .091
.146 .146
open open
BH5025 BH5025
steel steel
.039 .039
1.500 1.500
3.500 3.500
.091 .091
n/a n/a
closed closed
BH5025SS BH5025SS
304SS 304SS
.039 .039
1.500 1.500
3.500 3.500
.091 .091
n/a n/a
closed closed
BH5025ZN01 BH5025ZNO1
steel steel
.039 .039
1.500 1.500
3.500 3.500
.091 .091
.158 .158
closed closed
BH5025SS01 BH5025SSO1
304SS 304SS
.039 .039
1.500 1.500
3.500 3.500
.091 .091
.158 .158
closed closed
BH5021 BH5021
steel steel
.040 .040
1.000 1.000
2.000 2.000
.091 .091
.142 .142
open open
BH5021SS BH5021SS
304SS 304SS
.040 .040
1.000 1.000
2.000 2.000
.091 .091
.142 .142
open open
BH5023 BH5023
steel steel
.040 .040
1.500 1.500
3.500 3.500
.091 .091
.157 .157
open open
BH5023SS BH5023SS
304SS 304SS
.040 .040
1.500 1.500
3.500 3.500
.091 .091
.157 .157
open open
BH5023ZN01 BH5023ZNO1
steel steel
.040 .040
1.500 1.500
3.500 3.500
.091 .091
.157 .157
open open
BH5023SS01 BH5023SSO1
304SS 304SS
.040 .040
1.500 1.500
3.500 3.500
.091 .091
.157 .157
open open
BH5027 BH5027
steel steel
.047 .047
2.000 2.000
5.000 5.000
.118 .118
n/a n/a
closed closed
BH5027SS BH5027SS
304SS 304SS
.047 .047
2.000 2.000
5.000 5.000
.118 .118
n/a n/a
closed closed
BH5027ZN01 BH5027ZNO1
steel steel
.047 .047
2.000 2.000
5.000 5.000
.118 .118
.193 .193
closed closed
BH5027SS01 BH5027SSO1
304SS 304SS
.047 .047
2.000 2.000
5.000 5.000
.118 .118
.193 .193
closed closed
BH5028 BH5028
steel steel
.047 .047
2.000 2.000
5.000 5.000
.118 .118
n/a n/a
open open
BH5028SS BH5028SS
304SS 304SS
.047 .047
2.000 2.000
5.000 5.000
.118 .118
n/a n/a
open open
BH5028ZN01 BH5028ZNO1
steel steel
.047 .047
2.000 2.000
5.000 5.000
.118 .118
.193 .193
open open
BH5028SS01 BH5028SSO1
304SS 304SS
.047 .047
2.000 2.000
5.000 5.000
.118 .118
.193 .193
open open
BH5085 BH5085
steel steel
.050 .050
2.750 2.750
1.562 1.562
.115 .115
.156 .156
open open
BH5087 BH5087
steel steel
.050 .050
3.250 3.250
1.562 1.562
.115 .115
.156 .156
open open
BH5087ZN BH5087ZN
steel steel
.050 .050
3.250 3.250
1.562 1.562
.115 .115
.156 .156
open open
BH5089SS BH5089SS
Part Number Part Number
304SS 304SS
.060 .060
1.500 1.500
2.500 2.500
.120 .120
n/a n/a
open open
BH5089SS-01 401)BH5089SS-01
304SS 304SS
.060 .060
1.50 1.50
2.500 2.500
.120 .120
.250 .250
open open
BH5090 BH5090
steel steel
.060 .060
2.000 2.000
3.000 3.000
.125 .125
n/a n/a
open open
allhinges hingeshave have coined coined pins I all pins providingthat thatquantities quantitiesare aresufficient sufficientand and lead lead times I providing times can Sierra Pacific can be be extended, extended, Sierra Pacificcan canprovide provide you you with with aa spring that is is manufactured to your your exact exact spring loaded loaded hinge hinge that manufactured to requirements requirements
214 214
Request Info
Download Download 3Dmour @@www.spep.com www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
contactSierra Sierra Pacific Pacific for I contact for more more detailed detailed information information regarding torque torque specifications specifications for for all all hinges hinges on regarding on this this page page numbers: BH5085, & m' part part numbers: BH5085, BH5021, BH5021, BH5023ZN01, BH5023ZN01, & BH5087ZN have have clear clear zinc zinc plated plated finish finish BH5087ZN
Hinges and Industrial Hardware
scale 1:2 scale 1:2
0 O ,0
Hinges
Spring Spring Loaded Loaded Hinges Hinges
continued from previous previous page continued from page seeprevious previous page page for for hinge hinge details details I see
r
O BH5015 BH5015 BH5015SS BH501555
BH5022 BH5022 BH5022SS BH502255
0
0
0 0
0
BH5020 BH5020
BH502001 BH502001
BH5030 BH5030
*reverse
0 BH5022ZN01 BH5022ZNO1 BH5022SS01 BH50225501
assembled
0 11111111111111110
0
0
0
BH5030SS01 BH50305501
BH5024 BH5024 BH5024SS BH502455
BH5024ZN01 BH5024ZNO1 BH5024SS01 BH50245501
0
BH5031SS BH503155
0
0
BH5033 BH5033
0
9
BH5021 BH5021 BH5021SS BH502155
0 111111111
111111111 0 BH5023 BH5023 BH5023SS BH502355
0
0
0 BH5023ZN01 BH5023ZNO1 BH5023SS01 BH50235501
0
0
BH5034ZN01 BH5034ZNO1 BH5034SS01 BH50345501
O
0 BH5035ZN01 BH5035ZNO1 BH5035SS01 BH50355501
0 gig
O BH5025ZN BH5025ZN BH5025SS BH502555
0 BH5025ZN01 BH5025ZNO1 BH5025SS01 BH50255501
BH5089SS BH508955
BH5090 BH5090
1111111111
0 0 BH5027ZN BH5027ZN BH5027SS BH502755
0
0
BH5089SS-01 OfilTO BH508955-01
BH5027ZN01 BH5027ZNO1 BH5027SS01 BH50275501
0
I-1 J
1_1211E—J
N1VI llIIVli
fl BH5028ZN BH5028IN BH5028SS BH502855
BH5028ZN01 BH5028ZNO1 BH5028SS01 BH50285501 Request Info
BH5085 ■ BH5085 (cover hinge) (cover hinge)
BH5087 BH5087 BH5087N BH5087N (cover hinge) (cover hinge)
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
215 215
Hinges
a..."M" MNIIM"W".6
AND PRODUCTS
Single Single Action Action Spring Spring Hinge Hinge Part Material PartNumber Number Material
BH5095 BH5095
C
4.00 101.6 4.00[101.6]
.098 2.50 .098[2.50]
steel steel
Finish Finish gray painted gray painted
for for right or left left handed handed use use right or adjustabletension, tension, spring spring loaded loaded open I adjustable open
.281 7.14 0.281[7.14] (8) HOLES 2.00 50.8 2.00[50.8]
4.00 101.6 4.00[ 01.6]
(04
E=MEE
1.00 25.4 1.00[ 5.4]
:
.63 15.9 .63[15.9]
I
°
.51 13.0 .51[13.0]
° M. 25.55] 11.00 00[25
25.55] 11.00 00[25
.97 24.6 .97[24.6]
Spring Spring Loaded Loaded Open Open Hinge Hinge Part Material PartNumber Number Material 69.6 2.74 [69.6]
H2060ZN H2060ZN
1.01 25.7 .060 1.52 .565[I.52[
41.1 1.62 [41.1]
steel steel
Finish Finish zinc plated zinc plated
hingeisis spring spring loaded loaded open Ihinge open
.200 [5.08] 5.08 0.200 (6) HOLES
69.2 2.73 [69.2]
16.0 .63 [18.0]
.38 9.6
Adjustable Spring Spring Loaded Adjustable Loaded Hinge Hinge Part Material PartNumber Number Material
H2062ZN H2062ZN 65.3 2.57 [85.3] CENT. 9.6 .38 [9.6] TYP
w
1.01 25.7
41.1 1.62 [41.1] CENT. TYP
.060 1.52 16.0 .63 [18.0] TYP
zinc plated zinc plated
is spring ►hinge hinge is spring loaded loaded open open includes: ►kit kit includes: (6)screws screws I (6) (1)adjusting adjusting lever lever I (1) (1) adjusting adjusting pin I (1) pin
1.25 31.8
.315 8.00 xx 82' 82 CSINK C'SINK 0.315[8.00] FOR A #7 #7 F.H.S. F.H.S. FORA (6) PLACES 1.25 31.8
2.74 69.6 2.74[69.6]
steel steel
Finish Finish
.236 6.00 0.238[8.00] COLD OLD HEADED PIN SPIN ON ONE END
.61 15.5
Dual Spring Spring Release Release Hinge Dual Hinge Part No. Part No.
2021SS 202155 .126 [3.20] 3.20 0.126 (4) HOLES
38.0 1.50 [384 51.0 2.01 [51.0] CENT.
Finish Finish
304SS 304SS
brushed brushed
.059[1.50] 1.50 -.-11-.-.059
MIILMAIN 63.2 2.49 [63.2] CENT. 76.0 2.99 [76.0]
@www.spep.com www.spep.com Download31)moDELs @ 216 Download 216
Material Material
.256 [6.50] 6.50 0.256 PIN
9.8 .39 [9.8]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Left Hand Right Hand Hand Left Hand Right Part No. Part No. Part No. Part No.
Material Material
2011 2012 2011 2012
Finish Finish
1.75 44.5 1.75] 44.5] .50 12.7 12.7 ] .50[
304SS tumbled tumbled 304SS .250 6.35 0.250[6.35]
male leaf leaf only I male only
1.00 25.4 1.00[2 5.4]
left hand hand shown left shown
.25 6.4 .25[6.4] .051 1.30 H.051[1.30]
Hinges
Spring Spring Release Release Hinge Hinge
.128 3.25 0.128[3.25] (2) HOLES
(TYP.) .25 6.4 (TYP.) .25[6.4]
Spring Release Hinge Left Hand Part No.
Right Hand Part No.
2013
2014
Material
Finish
1.75 44.5 .050 1.27
304SS
tumbled
sold as a male & female set only .128 3.25
(4) HOLES HOLES (4)
.37 9.4
.250 6.35 0.250[6.35] 1.00 25.4 1.00[25.4]
left hand hand shown left shown
.25 6.4 .25[6.4] (TYP.) .25 6.4 (TYP. .25[6.4]
Dual Spring Spring Release Release Hinge Dual Hinge Female Dual Dual Spring Spring Release Release Hinge Female Hinge Female Female Part Part Number Number
Material Material
Finish Finish
304SS 304SS
tumbled tumbled
2016 2016
.128 3.25 0.128[3.25] (2) HOLES
.050 1.27
female
FEMALE
Male Dual Dual Spring Spring Release Release Hinge Male Hinge .250 6.35 0.250[8.35]
Male Part Part Male Number Number
Material
2015 2015
Finish Finish
304SS 304SS
tumbled tumbled
1.00 25.4 1.00[25.4] .25 6.4 .25[8.4] .050 5o[ 1.27 ] —11--.o
(TYP.) .25 6.4 (TYP.) .25[8.4]
.128 3.25 0.128[3.25] (4) HOLES
4.00 101.6 4.00[101.8]
male male
MALE
Dual Spring Spring Release Release Hinges Dual Hinges Part Part Number Number
Material Material
Finish Finish
Height Height
2018 2018
steel steel
zinc plated zinc plated
.67 [17] .67 [17]
2019 2019
steel steel
zinc plated zinc plated
.79 [20] .79 [20]
2020 2020
steel steel
zinc plated zinc plated
.92 [23.4] .92 [23.4]
2018SS 201855
304SS 304SS
passivated passivated
.67 [17] .67 [17]
2019SS 201955
304SS 304SS
passivated passivated
.79 [20] .79 [20]
2020SS 202055
304SS 304SS
passivated .92[23.4] [23.4] passivated .92
.236 6.00 0.236[6.00]
3.14 79.8 3.14[79.8]
.39 10.0 .39[10 0] TYP. TYP,
4.96 126.0 4.96[126.0]
.22 5.5 .22[5.5]
9
1 5.400 ] ..213 2 1 3[5.4 (2) HOLES 1.89 48.0 1.89[48.0] CENT. CENT.
.20 5.2 .20[5 .2]
.059 1.50 .059[1.5O]•-
.47 12.0
1-800-453-1692 www.aboveboardelectronics.com
.0591 1.500
3.17 80.5 3.17[80.5] CENT. 3.95 100.3 ] 3.95[100.3 CENT.
END VIEW DOOR LEAF
TOP M/IEW 1: VIEW DOOR LEAF
HEIGHT
.20 5.2 20[5.2]
5.400 ] ..213 2 1 3[5.4 (2) HOLES
2.67 67.8 2.67[67.8] CENT.
Request Info
4.57 116.0 ] 4.57[116.0 CENT.
TOP VIEW TF Q.110N FRAME FRAME LEAF LEAF
.20 5.0 .20[5.0] END VIEW END VIEW FRAME FRAME LEAF LEAF
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
217 217
Hinges
Stock Steel Stock Steel Cane CaneBolt BoltLatches Latches El Left Hand Left Hand Part Number Part Number
C
A A
B
C
D
E
F
1841HZ 1841HZ
1.375 1.375
none none
.750 .750
.158 .158
.250 .250
1861NN 1861NN
2.00 2.00
none none
.875 .875
.187 .187
.375 .375
1871HN 1871HN
2.75 2.75
1.375 1375
.750 .750
.250 .250
1871HZ 1871HZ
2.75 2.75
1.375 1375
.750 .750
1871NZ 1871NZ
2.75 2.75
none none
1871NN 1871NN
2.75 2.75
1872HZ 1872HZ
Right Hand Right Hand Part Number Part Number
G
H
J
.040 .040
.188 .188
.625 .625
.187 .187
1941HZ 1941HZ
.050 .050
none none
.69 .69
none none
1961NN 1961NN
.500 .500
.060 .060
.250 .250
.81 .81
.250 .250
1971HN 1971HN
.250 .250
.500 .500
.060 .060
.250 .250
.81 .81
.250 .250
1971HZ 1971HZ
.750 .750
.250 .250
.500 .500
.060 .060
none none
.81 .81
none none
1971NZ 1971NZ
none none
.750 .750
.250 .250
.500 .500
.060 .060
none none
.81 .81
none none
1971NN 1971NN
2.75 2.75
1.375 1375
.750 .750
.250 .250
.500 .500
.060 .060
.250 .250
.81 .81
.250 .250
1972HZ 1972HZ
1872NN 1872NN
2.75 2.75
none none
.750 .750
.250 .250
.500 .500
.060 .060
none none
.81 .81
none none
1972NN 1972NN
1881HZ 1881HZ
2.75 2.75
1.375 1375
1.00 1.00
.250 .250
.500 .500
.060 .060
.250 .250
.81 .81
.250 .250
1981HZ 1981HZ
1881NN 1881NN
2.75 2.75
none none
1.00 1.00
.250 .250
.500 .500
.060 .060
none none
.81 .81
none none
1981NN 1981NN
1882HZ 1882HZ
2.75 2.75
1.375 1375
1.00 1.00
.250 .250
.500 .500
.060 .060
.250 .250
.81 .81
.250 .250
1982HZ 1982HZ
1882NZ 1882NZ
2.75 2.75
none none
1.00 1.00
.250 .250
.500 .500
.060 .060
none none
.81 .81
none none
1982NZ 1982NZ
1882NN 1882NN
2.75 2.75
none none
1.00 1.00
.250 .250
.500 .500
.060 .060
none none
.81 .81
none none
1982NN 1982NN
leaves ►steel steel leaves ►steel, steel, zinc zinc plated plated pins pins steel zinc ►spring spring steel zinc plated plated c-clips c-clips ►304SS 304SS springs springs in stock stock ►in E
D D
.128 [3.25] [3.25] HOLES HOLES 0.128 (2) HOLES HOLES STANDARD (2) STANDARD (3) HOLES HOLES OPTIONAL OPTIONAL (3)
A A
E 1=11111 4= 1000011= 1 H
C
JJ example part example part no. no. 1951NN 1951NN G
F
B LEFT HAND HAND SHOWN SHOWN LEFT
--‘144A46j--
EXAMPLE PART EXAMPLE PART NO. NO.
181 181
1 1
H H
Z Z
example part no. 1921NZ 1921NZ
1 1
BASIC PART PART NUMBER BASIC NUMBER
2
PIN NOSE NOSE STYLE STYLE PIN N -- NO NO MOUNTING MOUNTING HOLES HOLES N H -- WITH WITH MOUNTING MOUNTING HOLES HOLES H
PIN NOSE NOSE STYLE PIN STYLE
N -- NO NO FINISH FINISH ON ON LEAF LEAF N Z Z -- ZINC ZINC FINISH FINISH ON ON LEAF LEAF
1.
Build Build Your YourOwn OwnCane Cane Bolt Bolt Latches Latches Left Hand Left Hand Part Number Part Number
Download www.spep.com Download3DmoDELs @ @ www.spep.com
RightHand Hand Right Part Number Part Number
.156 .156
191 X XX XX 191 X
.437 .437
.156 .156
192 X XX XX 192 X
.625 .625
.187 .187
193 X XX XX 193 X
.187 .187
.625 .625
.187 .187
194 XXXX XX 194
.250 .250
.687 .687
.187 .187
195 X XX XX 195 X
.050 .050
.250 .250
.687 .687
.187 .187
196 X XX XX 196 X
.060 .060
.250 .250
.812 .812
.250 .250
197 X XX XX 197 X
.060 .060
.250 .250
.812 .812
.250 .250
198 X XX XX 198 X
B
C
D
E
F
G
H
.875 .875
.438 .438
.375 .375
.125 .125
.187 .187
.040 .040
.156 .156
.437 .437
182 X XX XX 182 X
.875 .875
.438 .438
.500 .500
.125 .125
.187 .187
.040 .040
.156 .156
183 X XX XX 183 X
1.375 1.375
.688 .688
.500 .500
.156 .156
.250 .250
.040 .040
.187 .187
184 XXXX XX 184
1.375 1.375
.688 .688
.750 .750
.156 .156
.250 .250
.040 .040
185 X XX XX 185 X
2.00 2.00
1.00 1.00
.625 .625
.187 .187
.375 .375
.050 .050
186 X XX XX 186 X
2.00 2.00
1.00 1.00
.875 .875
.187 .187
.375 .375
187 X XX XX 187 X
2.75 2.75
1.375 1375
.750 .750
.250 .250
.500 .500
188 XXXX XX 188
2.75 2.75
1.375 1375
1.00 1.00
.250 .250
.500 .500
181 X XX XX 181 X
218 218
J
A A
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part Number Part Number
Description Description
Material Material
Finish Finish
Holes Holes
1832HZ01 1832HZ01
left hand hand left
steel steel
zinc plated zinc plated
Ø.128 [3.25] [3.25] 0.128
1932HZ01 1932HZ01
right hand hand right
steel steel
zinc plated zinc plated
Ø.128 [3.25] [3.25] 0.128
1832HSS01 1832H5501
left hand hand left
304SS 304SS
mill mill
Ø.136 [3.45] [3.45] 0.136
1932HSS01 1932H5501
right hand hand right
304SS 304SS
mill mill
Ø.136 [3.45] [3.45] 0.136
Steel Cane Bolt Steel Cane Bolt Latches Latches
Hinges
yet rya
left hand left hand 304SS 30455 .50 12.7 .50[12.7]
1.38 34.9 1.38[34.9]
ItalieWWII! =me.
IIRIEPP11111411 .157 4.00 0.157[4.00] PIN
.50 12.7
.61 15.5 .61[15.5] .19 4.7 .19[4.7]
.043 1.10 043[1.10] THK. THK.
HOLES HOLES (2) PLACES PLACES (2)
1.00 25.4 1.00[25.4] CENT.
right hand hand right steel steel
300 Series Series Stainless Stainless Steel Cane Bolt 300 Steel Cane Bolt Latches Latches Material Material
Holes Holes
1841HZSS 1841HZSS
Part Number Description Part Number Description left hand hand left
300 series series stainless 300 stainless steel steel
passivated passivated
1941HZSS 1941HZSS
right hand hand right
300 series series stainless 300 stainless steel steel
passivated passivated
.25 6.4 .25[6.4]
1.38 34.9 1.38[34.9]
right hand hand right shown shown
.157 4.00 0.157[4.00]] PIN
.63 15.9 .63[15.9]
.19 4.7 .19[4.7]
.75 19.1
.128 3.25 0.128[3.25] (2) HOLES HOLES (2)
1.00 25.4 1.00[25.4] CENT. CENT.
.039 1.00 .039[1.00] THK. THK.
Aluminum Spring Spring Loaded Loaded Bolt Bolt Latches Latches Aluminum Description Description
Material Material
Material Material Thickness Thickness
1440 1440
right hand hand right
aluminum aluminum
.125 [3.18] .125 [3.18]
mill mill
1441 1441
left hand hand left
aluminum aluminum
.125 [3.18] .125 [3.18]
mill mill
Part Number Part Number
Finish Finish
stainless steel steel pin and components I stainless pin and components 5.03 127.8 5.03[127.8]
1.00 25.4 1.00[25.4]
right hand hand right
h hh h i 1.25 31.8 1.25[31.8]
O .188 4.78 HOLE HOLE WITH WITH 0.188[4.78] .270[6.86] [6.86] xx 82° 82 C'SINK C'SINK 0.270 (3) PLACES PLACES (3)
1.75 44.5 1.75[44.5]
(2M 1.75 44.5 1.75[44.5]
.49 12.4 .49[12.4]
.76 19.4 .76[19.4]
6.81 173.0 6.81[173.0]
.375 9.53 0.375[9.53]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
left hand left hand
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
219 219
Hinges
SIERRA PACIFIC ENGINEERING AND PRODUCTS Butt Hinges Butt Hinges Steel Butt Hinges Hinges Steel Butt Part Part Number Number 55151501 5S151501 •
Pin Pin Pin Pin Open Matl. Open Matl. Length Length Retention Dia. Retention Thk. Dia. Width Thk. Width .050 .050
1.50 1.50
steel pin stainless steel ends stainless pin spun ends .120 spun .120
1.50 1.50
staked staked
651515BP 6S1515BP •
.060 .060
1.50 150
1.50 150
.125 .125
6S1520 651520*
.060 .060
1.50 150
2.00 2.00
spun ends .125 ends .125 spun
brass pin brass pin —
6S1520BP • 651520BP
.060 .060
1.50 1.50
2.00 2.00
.125 .125
staked staked
brass pin brass pin
6S1525BP 651525BP
.060 .060
1.50 1.50
2.50 2.50
.125 .125
staked staked
brass pin brass pin
6S2020BP • 652020BP
.060 .060
2.00 2.00
2.00 2.00
.125 .125
staked staked
brass pin brass pin
652025BP • 6S2025BP
.060 .060
2.00 2.00
2.50 2.50
.125 .125
staked staked
brass brass pin pin
652525BP 6S2525BP •
.060 .060
2.50 2.50
.125 .125
2.50 2.50
staked staked
brass pin brass pin
.120 .120
3.50 350
4.00 4.00
spun ends .250 spun .250 ends
—
12S4040 1254040**
.120 .120
4.00 4.00
4.00 4.00
spun ends .276 spun .276 ends
—
12540401 12S40401 • *
.118 .118
4.00 4.00
4.00 4.00
.276 .276
12S6060 1256060*
.120 .120
6.00 6.00
6.00 6.00
spun ends .250 spun .250 ends
—
13S4040 1354040*
.130 .130
4.00 4.00
4.00 4.00
spun ends .250 spun .250 ends
—
18S3060 1853060*
.180 .180
3.00 3.00
6.00 6.00
.375 spun .375 spun ends ends
—
18S4040 1854040*
.180 .180
4.00 4.00
4.00 4.00
.375 spun .375 spun ends ends
stainless stainless pin pin
18S4050 1854050*
.180 .180
4.00 4.00
5.00 5.00
.375 spun .375 spun ends ends
—
1854060 18S4060
.180 .180
4.00 4.00
6.00 6.00
spun ends .375 spun .375 ends
—
18S5050 1855050*
.180 .180
5.00 5.00
5.00 5.00
ends spun ends .375 spun .375
—
5.00 5.00
6.00 6.00
.375 spun .375 spun ends ends
—
12S3540 1253540
(1) end (1) end spun spun
swaged ½ swaged lh
65152001 6S152001 •
.060 .060
1.50 130
2.00 2.00
.180 .180
staked staked
zinc pltd. zinc pltd. finish finish brass pin with pin with brass (2) Ø.203 (2) 0.203 holes holes
6S152002 65152002*
.060 .060
1.50 150
2.00 2.00
.180 .180
staked staked
brass pin pin brass
18S5060 1855060*
.180 .180
752020* 7S2020
.074 .074
2.00 2.00
2.00 2.00
spun ends .187 spun ends .187
—
18S5080 1855080
.180 .180
5.00 5.00
8.00 8.00
.375 spun .375 spun ends ends
—
752021* 7S2021
.074 .074
2.00 2.00
2.00 2.00
ends spun ends .187 spun .187
—
18S6060 * 1856060*
.180 .180
6.00 6.00
6.00 6.00
spun ends .375 spun .375 ends
—
7S2025 752025
.074 .074
2.00 2.00
2.50 230
ends spun ends .187 spun .187
—
18S6080 1856080
.180 .180
6.00 6.00
8.00 8.00
spun ends .375 spun .375 ends
7S2030 752030
.074 .074
2.00 2.00
3.00 3.00
spun ends .187 spun ends .187
—
255404055P 25S4040SSP • *
.250 .250
4.00 4.00
4.00 4.00
.625 .625
flush pin flush pin
stainless stainless pin pin
752525* 7S2525
.074 .074
2.50 250
2.50 250
spun ends ends .187 spun .187
—
25S4050 2554050
.250 .250
4.00 4.00
5.00 5.00
.625 .625
flush pin flush pin
—
7S3030 753030*
.074 .074
3.00 3.00
3.00 3.00
ends spun ends .187 spun .187
—
25S5050 2555050*
.250 .250
5.00 5.00
5.00 5.00
.625 .625
flush pin flush pin
—
25S5060 2555060
.250 .250
5.00 5.00
6.00 6.00
.625 .625
flush pin flush pin
—
25S6060 2556060*
.250 .250
6.00 6.00
6.00 6.00
.625 .625
flush pin flush pin
—
7S303003 • 75303003
.074 .074
3.00 3.00
.187 .187
3.00 3.00
staked staked
zinc plated, zinc plated, holes (6) Ø.250 holes (6)0250
8S1520SSP 85152055P •
.085 .085
1.50 150
2.00 2.00
.195 .195
staked staked
stainless steel stainless steel pin pin
8S2030 852030
.085 .085
2.00 2.00
3.00 3.00
.195 .195
staked staked
—
8S2525 852525
.085 .085
2.50 230
2.50 250
.195 .195
staked staked
—
8S2525SP • 8525255P
.085 .085
230 2.50
2.50 230
ends spun ends .195 spun .195
8S3030 853030
.085 .085
3.00 3.00
3.00 3.00
.195 .195
staked staked
—
8S3535 853535
.085 .085
3.50 350
3.50 350
.195 .195
staked staked
—
8S4040 854040
.085 .085
4.00 4.00
4.00 4.00
.195 .195
staked staked
—
9S2030 952030*
.090 .090
2.00 2.00
3.00 3.00
ends spun ends .187 spun .187
—
9S2530 952530
.090 .090
2.50 250
3.00 3.00
spun ends .187 spun ends .187
—
9S3030 953030*
.090 .090
3.00 3.00
3.00 3.00
spun ends ends .187 spun .187
—
9S303002 • 95303002
.098 .098
3.00 3.00
3.00 3.00
ends spun ends .250 spun .250
zinc plated, zinc plated, stainless pin stainless pin
—
Steel Economy Economy Butt Butt Hinges Hinges Steel Part Number Part Number
50.0/1.97" 50.0/1.97"
50.0/1.97" 50.0/1.97"
5.00/.197" 5.00/.197"
3.00/.120" 3.00/.120"
63.5/2.50" 635/250"
65.0/2.56" 65.0/256"
6.00/.236" 6.00/236"
12S2829 1252829**
3.20/.126" 3.20/.126"
73.0/2.87" 73.0/2.87"
75.0/2.95" 75.0/2.95"
6.80/.268" 6.80/.268"
13S3435 • 1353435
3.50/.138" 3.50/.138"
87.9/3.46" 87.9/3.46"
90.0/3.54" 90.0/354"
7.00/.276" 7.00/.276"
1353939* 13S3939
3.50/.138" 3.50/.138"
100.0/3.94" 100.0/3.94"
100.0/3.94" 100.0/3.94"
8.00/.315" 8.00/315"
4.50/.177" 4.50/.177"
123.0/4.84" 123.0/4.84"
125.0/4.92" 125.0/4.92"
10.00/.394" 10.00/394"
5.00/.197" 5.00/.197"
150.0/5.91" 150.0/5.91"
150.0/5.91" 150.0/5.91"
11.00/.433" 11.00/.433"
3.50 330
3.50 330
ends spun ends .187 spun .187
—
.105 .105
2.50 250
2.50 250
ends spun ends .187 spun .187
—
19S5959 1955959.4' holes noholes I no finish I mill millfinish ends spunends I spun
2.00 2.00
2.50 250
spun ends .250 spun .250 ends
—
.120 .120
2.50 230
2.50 250
ends spun ends .250 spun .250
—
12S2530 • 1252530
.120 .120
2.50 230
3.00 3.00
ends .250 spun ends .250 spun
—
spun ends .250 spun ends .250
zinc plated, zinc plated, (4) (4) Ø.262 0.262 holes holes
.120 .120
2.50 250
3.00 3.00
Pin Diameter Pin Diameter (mm/inch) (mm/inch)
2.50/.098" 2.50/.098"
.090 .090
.120 .120
Length Length (mm/inch) (mm/inch)
9S1919 951919**
10S2525 1052525 1252525 12S2525 •
Open Open (mm/inch) (mm/Inch)
Thickness Thickness (mm/inch) (mm/Inch)
1252526 12S2526 • *
9S3535 • 953535 1252025 12S2025
—
/ steel otherwise indicated indicated unless otherwise pin unless steel pin saver moneysaver indicatesmoney * indicates item stock item indicatesstock • indicates
unless indicated holes unless / no indicated noholes finish millfinish I mill material I steel leaf material steelleaf
17S4849 1754849**
12S253003 • 125253003
ends spun ends / spun saver moneysaver indicatesmoney * indicates stock item indicates stock • indicates item
Stainless Steel Economy Economy Butt Butt Hinges Hinges Stainless Steel Thickness Thickness (mm/inch) (mm/Inch)
Open Open (mm/inch) (mm/Inch)
Length Length (mm/inch) (mm/inch)
Pin Diameter Pin Diameter (mm/inch) (mm/inch)
9551919** 9SS1919
2.50/.098" 2.50/.098"
50.0/1.97" 50.0/1.97"
50.0/1.97" 50.0/1.97"
5.00/.197" 5.00/.197"
Part Number Part Number
12S2535 1252535
.120 .120
2.50 250
3.50 350
ends spun ends .250 spun .250
—
12S3030 • 1253030
.120 .120
3.00 3.00
3.00 3.00
ends spun ends .250 spun .250
—
12S303001 • 125303001
.120 .120
3.00 3.00
3.00 3.00
ends 1½ spun ends .250 spun /2 swaged, swaged, zinc zinc .250
12SS2526 • * 12552526
3.00/.120" 3.00/.120"
64.0/2.52" 64.0/252"
65.0/2.56" 65.0/236"
6.00/.236" 6.00/236"
12S3035 1253035
.120 .120
3.00 3.00
3.50 350
spun ends .250 spun .250 ends
—
12SS2829 12552829**
3.00/.120" 3.00/.120"
75.0/2.95" 75.0/2.95"
75.0/2.95" 75.0/2.95"
7.00/.276" 7.00/.276"
12S3040 1253040
.120 .120
3.00 3.00
4.00 4.00
ends spun ends .250 spun .250
—
12553435 • 12SS3435
3.00/.120" 3.00/.120"
88.2/3.47" 88.2/3.47"
90.0/3.54" 90.0/3.54"
8.00/.315" 8.00/315"
12S3535 1253535*
.118 .118
330 3.50
3.50 350
ends spun ends .256 spun .256
—
15SS3939 15553939*
4.00/.158" 4.00/.158"
100.0/3.94" 100.0/3.94"
100.0/3.94" 100.0/3.94"
8.00/.315" 8.00/315"
unless indicated holes unless / no indicated noholes finish mill finish / mill I steel material leaf material steelleaf
otherwise indicated unless otherwise pinunless steelpin I steel indicated saver money saver indicates money indicates stock item • indicates item indicates stock
► 304SS, mill finish finish 304SS, mill holes noholes I no ends spun ends I spun
Request Info
220 220
Special Special Features Features
Pin Pin Pin Pin Matl. Open Matl. Open Length Length Retention Dia. Retention Dia. Width Thk. Width Thk.
Part Part Number Number
Special Special Features Features
Download www.spep.com @ www.spep.com Download3DmoDELs @
1-800-453-1692 www.aboveboardelectronics.com
saver moneysaver indicatesmoney * indicates stock item indicates stock • indicates item
•
Hinges and Industrial industrial Hardware Hardware Hinges and
Hinges Butt Hinges Aluminum Aluminum Butt Part Number Part Number
5A2025 5A2025
Pin Open Matl. Open Pin Matl. Length Length Dia. Dia. Width Thk. Width Thlc.
Pin Pin Retention Retention
Special Special Features Features
.125
spun spun ends ends
—
.051 .051
2.50 250
2.00 2.00
Part Part Number Number
9SS2030 9552030 •
Matl. Matl. Thk. Thk.
Pin Pin Pin Pin Open Open Length Length Retention Dia. Dia. Retention Width Width
.090 .090
2.00 2.00
3.00 3.00
ends spunends .187 spun .187
— — —
6A1015 6A1015
.064 .064
1.00 1.00
1.50 150
.125
spun spun ends ends
—
9SS2530 9552530
.090 .090
2.50 2.50
3.00 3.00
ends spunends .187 spun .187
6A1515 6A1515
.064 .064
1.50 150
1.50 150
.125
spun spun ends ends
—
9SS3030 9553030 •
.090 .090
3.00 3.00
3.00 3.00
ends spun ends .187 spun .187
9SS303002 955303002 •
.090 .090
3.00 3.00
3.00 3.00
½ swaged lh swaged ends spunends .187 .187 spun Holes (6) (6) Ø.281 0.281 Holes
9SS3035 9553035 •
.090
3.00 3.00
3.50 350
spun ends .187 spun ends .187
—
9SS3535 9553535 •
.090 .090
3.50 3.50
3.50 3.50
ends spun ends .187 spun .187
—
.105 .105
2.00 2.00
2.50 2.50
ends spunends .187 .187 spun
—
.105 .105
2.50 2.50
2.50 2.50
ends spunends .187 spun .187
—
.120 .120
2.00 2.00
3.00 3.00
ends spun ends .250 spun .250
—
.120 .120
2.50 2.50
3.00 3.00
ends spunends .250 .250 spun
—
.120 .120
3.00 3.00
3.00 3.00
ends spunends .250 spun .250
—
.120 .120
3.00 3.00
4.00 4.00
ends spun ends .250 spun .250
—
.118 .118
3.50 3.50
3.50 3.50
ends spun ends .256 .256 spun
—
.120 .120
3.50 3.50
4.00 4.00
ends spunends .250 spun .250
—
.120 .120
4.00 4.00
4.00 4.00
ends spunends .276 spun .276
—
.120 .120
4.00 4.00
4.00 4.00
ends spun ends .276 .276 spun
½ swaged 1/2 swaged
6.00 6.00
4.00 4.00
.250 .250
6A2020 • 6A2020
.064 .064
2.00 2.00
2.00 2.00
.125
spun spun ends ends
—
6A2025 6A2025
.064 .064
2.00 2.00
2.50 250
.125
spun spun ends ends
—
6A2030 6A2030
2.00 .064 .064 2.00
3.00 3.00
.125
spun ends spun ends
6A2525 6A2525
.064 .064
2.50 2.50
2.50 250
.125
spun spun ends ends
_ — _ —
6A2530 6A2530
.064 .064
2.50 2.50
3.00 3.00
.125
spun spun ends ends
— -
10SS2025 10552025
6A3030 6A3030
.064 .064
3.00 3.00
3.00 3.00
.125
spun spun ends ends
— -
10SS2525 10552525
8A2020 • 8A2020
.081 .081
2.00 2.00
2.00 2.00
.187
spun spun ends ends
— -
12SS2030 12552030 •
8A2025 8A2025
.081 .081
2.00 2.00
2.50 250
.187
spun spun ends ends
— -
12SS2530 12552530
8A2525 8A2525
.081 .081
2.50 230
2.50 250
.187
spun spun ends ends
_ —
12SS3030 12553030 •
9A2030 9A2030
.091 .091
2.00 2.00
3.00 3.00
.187
spun spun ends ends
— -
12SS3040 • 12553040
9A2530 9A2530
.091 .091
2.50 250
3.00 3.00
.187
spun spun ends ends
— -
12SS3535 12553535
9A2535 9A2535
.091 .091
2.50 230
3.50 350
.187
spun spun ends ends
— -
12SS3540 12553540
9A3030 • 9A3030
.091 .091
3.00 3.00
3.00
.187
spun spun ends ends
_ —
12SS4040 12554040 •
9A3035 9A3035
.091 .091
3.00 3.00
3.50 350
.187
spun spun ends ends
—
12SS40402 125540402 •
9A3535 9A3535
.091 .091
3.50 350
3.50 350
.187
spun spun ends ends
—
12SS6040 12556040
12A2025 12A2025
.125 .125
2.00 2.00
2.50 250
.250 .250
spun spun ends ends
— -
12A2030 12A2030 •
.125 .125
2.00 2.00
3.00
.250
spun spun ends ends
—
Ono no holes holes pins and pins leaves and 302/304SSleaves I 302/304SS
12A2525 • 12A2525
.125 .125
2.50 250
2.50 250
.250 .250
spun spun ends ends
—
.125 .125
2.50 230
2.50
.250 .250
spun spun ends ends
holes (6) (6) Ø.250 0.250 holes
12A2530 12A2530
2.50 .125 250 .125
3.00
.250
spun ends spun ends
—
12A3030 12A3030 •
.125 .125
3.00 3.00
3.00
.250 .250
spun spun ends ends
—
12A3040 • 12A3040
.125 .125
3.00 3.00
4.00
.250 .250
spun spun ends ends
—
12A3540 12A3540
.125 .125
3.50 330
4.00
.250
spun spun ends ends
—
12A4040 • * 12A4040
.125 .125
4.00 4.00
4.00
.250 .250
spun spun ends ends
—
40912A252502 12A252502
saver money saver * indicates indicates money Omill mill finish finish item stock item indicatesstock Ono no holes holesunless unlessindicated indicated • indicates
Stainless Steel Steel Butt Butt Hinges Hinges Stainless Part Number Part Number
Matl. Math Thk. Thk.
Pin Pin Pin Pin Open Open Length Length Retention Dia. Retention Dia. Width Width
Special Special Features Features
3SS102001 355102001
.030 .030
1.00 1.00
2.00 2.00
.066 .066
staked staked
—
6SS1515 6551515 •
.060 .060
1.50 1.50
1.50 1.50
.125 .125
staked staked
—
6551520 • 6SS1520
.060 .060
1.50 1.50
2.00 2.00
.125 .125
staked staked
—
6SS2020 6552020
.060 .060
2.00 2.00
2.00 2.00
.125 .125
staked staked
—
6SS2025 6552025 •
.060 .060
2.00 2.00
2.50 2.50
.125 .125
staked staked
—
6SS2030 6552030
.060 .060
2.00 2.00
3.00 3.00
.125 spun .125 spun ends ends
—
6SS2525 6552525 •
.060 .060
2.50 2.50
2.50 250
.125 spun ends .125 spun ends
—
6SS2530 6552530
.060 .060
2.50 2.50
3.00 3.00
.125 .125 spun spun ends ends
—
7552021 • 7SS2021
.075 .075
2.00 2.00
2.00 2.00
.187 .187 spun spun ends ends
—
7SS2025 7552025
.075 .075
2.00 2.00
2.50 2.50
.187 spun ends .187 spun ends
—
7SS2525 7552525 •
.075 .075
2.50 2.50
2.50 2.50
.187 spun .187 spun ends ends
—
o no holes no holes pins and pins leaves and 0 302/304SS 302/304SS leaves
Special Sp Features Feall
.120 .120
none none
Hinges
Hinges Butt Hinges Butt
—
saver money saver * indicates indicates money indicates stock • indicates stock item item
Hinges Butt Hinges Type 31655 Butt Type 316SS Pin Pin Pin Pin Retention Diameter Retention Diameter
Material Material Thickness Thickness
Open Open Width Width
Length Length
6SST1515 65511 515 •
.060 .060
1.50 1.50
1.50 1.50
.125 .125
staked staked
6SST1520 65571520
.060 .060
1.50 1.50
2.00 2.00
.125 .125
staked staked
655T2020 • 6SST2020
.060 .060
2.00 2.00
2.00 2.00
.125 .125
staked staked
6SST2525 65572525 •
.060 .060
2.50 2.50
2.50 2.50
.125 .125
staked staked
7SST2020 755T2020 •
.075 .075
2.00 2.00
2.00 2.00
.187 .187
spun ends spun ends
95572030 9SST2030
.090 .090
2.00 2.00
3.00 3.00
.187 .187
spun ends spun ends
9SST3030 955T3030 •
.090 .090
3.00 3.00
3.00 3.00
.187 .187
spun spun ends ends
12SST2030 • 1255T2030
.120 .120
2.00 2.00
3.00 3.00
.250 .250
spun ends spun ends
1255T3030 12SST3030 •
.120 .120
3.00 3.00
3.00 3.00
.250 .250
spun ends spun ends
12SST3040 1255T3040 •
.120 .120
3.00 3.00
4.00 4.00
.250 .250
spun spun ends ends
12SST4040 1255T4040
.120 .120
4.00 4.00
4.00 4.00
.250 .250
spun spun ends ends
1855T4040 18SST4040 •
.180 .180
4.00 4.00
4.00 4.00
.375 .375
spun ends spun ends
Part Number Part Number
item stock item • indicates indicates stock
no no holes holes
saver moneysaver indicatesmoney *indicates stock item indicatesstock • indicates item Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place Order: Order: To Place
800.433.5554 800.433.5554
[email protected] [email protected]
221
- - ---- ---
Hinges
'-' 21111 PACIFY'' -
Cold Rolled Mill Finish Cold Rolled Steel Steel -- Mill Finish -- No No Holes Holes SCALE 1:1 SCALE 1:1
Material Material Thickness Thickness
Open Open Width Width
Length Length
Pin Pin Diameter Diameter
BH0004 BH0004
.030 .030
.75 .75
1.00 1.00
.063 .063
BH0005 BH0005
.020 .020
.75 .75
1.00 1.00
.072 .072
BH0050 BH0050
.035 .035
.75 .75
.75 .75
.099 .099
BH0055 BH0055
.035 .035
.75 .75
1.00 1.00
.091 .091
BH0060 BH0060
.035 .035
1.06 1.06
1.00 1.00
.091 .091
BH0065 BH0065
.035 .035
1.06 1.06
1.25 1.25
.091 .091
BH0070 BH0070
.035 .035
1.06 1.06
1.50 1.50
.091 .091
BH0075 BH0075
.035 .035
1.06 1.06
2.00 2.00
.091 .091
BH0080 BH0080*
.035 .035
1.25 1.25
1.50 1.50
.091 .091
BH0085 BH0085*
.035 .035
1.50 1.50
1.50 1.50
.091 .091
6S152501* 65152501**
.060 .060
1.50 1.50
2.50 2.50
.125 .125
Part Number Part Number
C
6S152501 * 65152501*#
BOTH OFFSET LEAVES
allabove abovehinges hingeshave havestaked staked pins pins and and flat flat leaves leaves except I all except for for part 6S152501, *this *this hinge hinge has has stainless part no. no.65152501, stainless steel steel pin pin and and offset offset leaves leaves these hinges hinges are are non-stock * these non-stock this hinge hinge only: only: brass brass material • this material with with lacquered lacquered finish finish
BH0005 BH0005
BH0050 BH0050
BH0055 BH0055
BH0060 BH0060
BH0065 BH0065
BH0070 BH0070
BH0075 BH0075
BH0080 BH0080
Request Info
BH0085 BH0085
1-800-453-1692 www.aboveboardelectronics.com
222 222
Download www.spep.com Download3DmoDELs @ @ www.spep.com
Hinges ---11--1..-and Industrial Hardware Hinge, "' "---"---
Part Number Part Number
BH7005BP BH7005BP
.044 .044
Length Length
Pin Pin Diameter Diameter
Pin Pin Retention Retention
Swage Swage Dimension Dimension
.94 .94
1.00 1.00
.102 .102
spun ends ends spun
.010 .010
#3 #3
Finish Finish
Open Open Width Width
brass brass plated plated
SCALE SCALE 1:1 1:1
Screw Screw" Size Size
BH7005ZN BH7005ZN
.044 .044
zinc plated zinc plated
.94 .94
1.00 1.00
.102 .102
spun ends ends spun
.010 .010
#3 #3
BH7010BP BH7010BP
.050 .050
brass brass plated plated
1.20 1.20
1.50 1.50
.102 .102
spun ends ends spun
.034 .034
#4 #4
BH7010ZN BH7010ZN
.050 .050
zinc plated zinc plated
1.20 1.20
1.50 1.50
.102 .102
spun ends ends spun
.034 .034
#4 #4
BH7015BP BH7015BP
.050 .050
brass brass plated plated
1.46 1.46
1.98 1.98
.118 .118
spun ends ends spun
.034 .034
#5 #5
BH7015ZN BH7015ZN
.050 .050
zinc plated zinc plated
1.46 1.46
1.98 1.98
.118 .118
spun ends ends spun
.034 .034
#5 #5
BH7020BP BH7020BP
.050 .050
brass brass plated plated
1.60 1.60
2.50 2.50
.125 .125
spun ends ends spun
.030 .030
#5 #5
BH7020ZN BH7020ZN
.050 .050
zinc plated zinc plated
1.60 1.60
2.50 2.50
.125 .125
spun ends ends spun
.030 .030
#5 #5
BH7025BP BH7025BP
.060 .060
brass brass plated plated
1.84 1.84
2.95 2.95
.158 .158
spun ends ends spun
.030 .030
#6 #6
BH7025ZN BH7025ZN
.060 .060
zinc plated zinc plated
1.84 1.84
2.95 2.95
.158 .158
spun ends ends spun
.030 .030
#6 #6
BH7030 * BH7030*
.071 .071
zinc plated zinc plated
2.00 2.00
3.00 3.00
.187 .187
spun ends ends spun
not swaged swaged not
#9 #9
Hinges
Steel Steel Economy Economy Butt Butt Hinges Hinges with with Swage Swage and and Holes Holes Material Material Thickness Thickness
doesnot nothave haveswaged swaged leaves leaves I **does
0 0
0 0 (
)
swage swage
0 0 BH7005BP BH7005BP BH7005ZN BH7005ZN
dimension [dimension
1 10
BH7010BP BH7010BP BH7010ZN BH7010ZN
t
0
0 0
(
)
0
0
0
BH7015BP BH7015BP BH7015ZN BH7015ZN
0
BH7020BP BH7020BP BH7020ZN BH70202N
)
(
0 0 0 BH7025BP BH7025BP BH7025ZN BH70252N
BH7030 BH7030 hinge does does not not have have swaged swaged leaves leaves * hinge Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 Ill
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
223 223
Hinges
SIERRA PACIFIC ENGINEEP'"" "`" "^^"^"
0'i C
Stainless Steel Steel Marine Marine Specialty Specialty Hinges Hinges Stainless Length Length
Open Open Width Width
Number Number Holes of Holes of
Holes Holes Size Size
M0627 M0627
1.08 1.08
1.17 1.17
2 2
#8 #8
M0827 M0827
1.13 1.13
3.60 3.60
2 2
#7 #7
M0990 M0990
2.00 2.00
1.50 1.50
4 4
#8 #8
M0991 M0991
2.00 2.00
1.75 1.75
4 4
#8 #8
M0992 M0992
2.00 2.00
2.00 2.00
4 4
#8 #8
M0993 M0993
3.00 3.00
2.00 2.00
6 6
#8 #8
M0994 M0994
3.00 3.00
3.00 3.00
6 6
#10 #10
M0995 M0995
2.50 2.50
2.76 2.76
5 5
#8 #8
M0996 M0996
1.50 1.50
1.25 1.25
4 4
#5 #5
M0997 M0997
1.50 1.50
1.31 1.31
4 4
#8 #8
M0998 M0998
1.50 1.50
2.75 2.75
6 6
#8 #8
M0999 M0999
1.50 1.50
2.03 2.03
55
#8 #8
M1000 M1000
1.50 1.50
4.00 4.00
4 4
#8 #8
M1001 M1001
1.50 1.50
6.00 6.00
6 6
#8 #8
M1002 M1002
2.00 2.00
2.50 2.50
4 4
#8 #8
M1003 M1003
2.00 2.00
2.75 2.75
4 4
#8 #8
M1004 M1004
1.50 1.50
2.65 2.65
4 4
#8 #8
M1005 M1005
1.50 1.50
2.03 2.03
5 5
#8 #8
M1008 M1008
1.50 1.50
1.31 1.31
4 4
#8 #8
M1009 M1009
1.50 1.50
1.31 1.31
4 4
#8 #8
M1010 M1010
2.13 2.13
4.24 4.24
5 5
#8 #8
M1012 M1012
1.06 1.06
4.00 4.00
4 4
#8 #8
M1067 M1067
2.00 2.00
3.00 3.00
4 4
#9 #9
M7203 M7203
3.44 3.44
1.19 1.19
4 4
#8 #8
Part Part Number Number
SCALE 1:2 1:2 SCALE
f
M0627 M0627 31655 material material 316SS
M0827 M0827
0
0
0
M0990 M0990
M0991 M0991
0
0 I
0
0
0 77 0
0
J
0
0
0 0 L_1 0
0
M0992 M0992
0
1
0 0
T302/304SS leaves ruggedT302/304SS tough, durable, leaves and and pin pin durable, rugged ►tough, heavy duty for heavy I deep duty fastening fastening strength strength holes for countersunkholes deepcountersunk for passivated for and passivated luster and high luster to aa high electropolished to ►electropolished resistance. corrosion resistance. superior superior corrosion are .060" pages are thesepages I all .060" thick, thick, with with onthese shownon hingesshown allhinges 0.120" pin, pin, except except where where otherwise otherwise indicated indicated Ø.120"
M0993 M0993
0
L_1
J
0
0,
M0995 M0995 special special order order only only
M0994 M0994
o 0
0
0
0
M0996 M0996 .035" .035" thick thick with with aa Ø.091 0.091 pin pin
'0
0
0
0
0
0,
0
0
T
I I
0 0
M0997 M0997 M0999 M0999
M0998 M0998 Request Info
1-800-453-1692 www.aboveboardelectronics.com
224 224
Download 3Dmoons @ www.spep.com @ www.spep.com Download
O
Hinges and Industrial Hardware
Stainless Stainless Steel Steel Marine Marine Specialty Specialty Hinges Hinges SCALE SCALE 1:2 1:2
O
0
O
0
O
0
O
0
M1002 M1002
Hinges
•
continued from previous previous page continued from page seeprevious previous page page for for hinge hinge details details I see
M1003 M1003
M1000 M1000
M1001 M1001
00 0
00 00
00
0 Oi
X
I
YI
0 0
M1008 M1008 0
0 CY
1J
0 0} M1009 M1009
j
M1005 M1005
M1004 M1004
O
0 0 0
0
1 0
0
O 0 ,...
© M1012 M1012
©
o
J
M7203 M7203 special special order order only only
M1067 M1067 .090" thick a Ø.250 .090" thick with with a 0.250 pin pin
M1010 M1010
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
225 225
Hinges
Concealed Hinge Concealed Hinge with with 1.89 1.89 [48.0] [48.0] Open Open Width Width Part Part Number Number
C
.125 3.18 C.D.S. C.D.S. PIN PIN 0.125[3.18] STAKED IN PLACE PLACE
2.00 50.8 2.00[50.8]
CH61820 CH61820
Material Material
Finish Finish
steel steel
mill mill
Material Material
Finish Finish
steel steel
mill mill
.75 19.1 .75[19.1]
1.14 29.0 1.14[29.0]
.060 1.52 .060[
Concealed Hinges Concealed Hinges with with 1.83 1.83 [46.5] [46.5] Open Open Width Width Part Part Number Number
.125 3.18 SS SS PIN PIN 0.125[3.18] SPUN SPUN BOTH BOTH ENDS ENDS
.80 20.3
CH71808 CH71808
.68 17.3 .68[17.3]
CH71808A CH71808A
aluminum aluminum
mill mill
CH71808SS CH7180855
304SS 304SS
electropolished electropolished
Part Part Number Number
Material Material
Finish Finish
1.15 29.2 1.15[29.2]
.075 1.91 .075[ 1.91
Concealed Hinges Concealed Hinges with with 1.63 1.63 [41.4] [41.4] Open Open Width Width .187 4.76 SS SS PIN PIN 0.187[4.76] SPUN ON BOTH ENDS
1.25 31.8 1.25[31.8]
etartirdAti:'
.95 24.1 ] .95[24.1
CH92612 CH92612
steel steel
mill mill
CH92612ZN CH92612ZN
steel steel
zinc plated zinc plated
CH92612A CH92612A
aluminum aluminum
mill mill
CH92612SS CH9261255
304SS 304SS
electropolished electropolished
Part Number
Material
Finish
steel steel
mill/ zinc plated plated mill/zinc
1.68 42.7 1.68[42.7]
.090 2.29 ] .090[2.29
Concealed Hinges Concealed Hinges with with Removable Removable Pin Pin .118 3.00 .118[3.00]
2.36 60.0 2.36[60.0]
H2085SS H208555
.41 10.4 .41[10.4] .80 20.4 .80[20.4]
H2085 Steel
1.65 42.0 1.65[42.0] 2.36 60.0 2.36[60.0]
1.06 26.9 1.06[26.9]
H2085 H2085
H2085-01 H2085-01 .20 5.0 70.2o]5.0] H2085SS-01 H208555-01
.256 6.50 xx .256[6.50] .472 [12.00] [12.00] .472 (2) OBROUNDS OBROUNDS (2)
.76 19.4 709.4] OFFSET OFFSET
stainless steel stainless steel
mill mill
steel steel
mill/ zinc plated plated mill/zinc
stainless steel stainless steel
mill mill
smallleaf leafof ofsteel steel hinges hinges have have aa mill I small mill finish finish for for welding; all other other components components are are zinc welding; all zinc plated plated
.79 .79 [20.0] [20.0] OFFSET OFFSET HINGE HINGE H2085 & & H2085SS H2085SS H2085 2.36 60.0 2.36[60.0]
.118 3.00 .41 10.4
1.04 26.5 1.04[26.5]
1.65 42.0 1.65[42.0]
H2085SS-01 H208555-01 stainless stainless steel steel
www.spep.com Download3DmoDELs @ @ www.spep.com 226 Download 226
2.36 60.0 2.36[60.0]
.20 5.0 1.29 32.8
.256 6.50 xx .256[6.50] .472 [12.00] (2) OBROUNDS OBROUNDS (2)
.94 24.0 OFFSET
.94 [24.0] [24.0] OFFSET OFFSET HINGE HINGE .94 H2085-01 & H2085-01 & H2085SS-01 H2085SS-01
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part No. Part No.
Dim Dim
Dim Dim
Dim Dim
Dim Dim
Dim Dim
Dim Dim
Dim Dim
A A
B
C
D
E
F
G
H
H2283 H2283
3.15 3.15 [80.0] [80.0]
2.598 2.598 [66.00] [66.00]
1.04 1.04 [26.5] [26.5]
1.14 1.14 [29.0] [29.0]
.860 .860
.61 .61
.75 .75
[21.84] [21.84]
[15.5] [15.5]
Ø.248 0.248 [6.30] [630]
[19.0] [19.0]
H2283-01 H2283-01
2.36 236 [60.0] [60.0]
1.890 1.890 [48.00] [48.00]
.72 .72 [18.5] [18.5]
1.29 1.29 [32.8] [32.8]
1.05 1.05 [26.8] [26.8]
.49 .49 [12.5] [12.5]
Ø.208 0.208 [5.30] [530]
.95 .95 [24.2] [24.2]
material: steel steel I material: finish: zinc ► finish: zinc plated plated
0G G X 90° 90° C'SINK X CSINK (2) PLCS. PLCS. (2)
.1181 [3.000] 3.000 .1181 THK. THK. KNUCKLE FOR KNUCKLE FOR Ø.1969[5.000] PIN PIN 0.1969[5.000]
Hinges
Concealed Hinges Concealed Hinges with with Removable Removable Pin Pin Dim Dim
A B
C
F F
E
D .57 14.5 .57[14.5] .0984 [2.500] 2.500 .0984 THK. THK.
.26 [6.5] 6.5 XX .46 .46 [11.8] [11.8] 0.26 (2) (2) PLCS. PLCS.
H
1.65 42.0 1.65 [42.0] CENT. CENT. 2.36 [60.0] 60.0 2.36
Institutional Institutional Hinge Hinge Part Number
J2083 J2083
Material erial
Finish Finish
steel steel
brass brass plated plated
.257 6.53 HEXAGONAL HEXAGONAL .257[6.53] PUNCH WITH WITH 82 82° C'SINK CSINK (4) PLACES
hospital tips tips I hospital
.189 4.80 C.D.S. C.D.S. PIN 0.189[4.80]
A A
1.19 30.2 1.19[30.2]
.415[10.54] xx .250 6.35 .415[10.541 .250[6.35] OBROUND BROUND WITH WITH 82 52° C'SINK CSINK (4) PLCS. 1.25 31.8 1.25[31.8]
1.09 27.6 149[274] .60 15.1 .60[10.1]
1.00 25.4 1.00[25.4]
1.56 39.6 I 591N el
1.57 39.9 1.57[39.9]
1.15 29.3 1.15[29.3]
J.W
2.98 75.6 218[75.6]
ME M. "
1.08 27.4 1.08[27.4]
2.75 69.9 2.75[69.9]
.087 2.20 .087[2.20]
1.25 31.8 1.25[31.8]
VIEW A
.73 18.6 73[18.6]
Institutional Institutional Hinge Hinge Part Number Material Part Number Merle!
H2018SS H201855
304SS 304SS
Finish
I
brushed brushed
1.87 47.4
hospital tips tips I hospital
.250 6.35 HOLE HOLE WITH WITH 0.250[6.35]
A .250 6.35 HOLE WITH Ø.250[6.35]
ftigicsiNK (4) PLACES (4) .332[8.43] C'SINK
.332[8.43] x 82° 82 C'SINK 0.332[8.431x CSINK (4) PLACES .189 4.80 PIN PIN 0.189[4.80]
1.18 29.9 1.10[29.9]
2.00 50.8 2.00[50.8]
.61 15.6
1.08 27.4 1.08[27.4]
37.9 11.49 49[379]
1.12 28.5 1.12[28.5]
1.93 48.9 3.00 76.2 3.00[761]
.74 18.7
2.75 69.9 2.75[69.9]
VIEW A .091 2.31 .091[2.31] THK. THK
1.25 31.8 2.13 54.1
.72 18.3 .72[18.3]
Institutional Institutional Hinge Hinge 'tuber Material Part Number Material Finish Finish H2093 H2093
steel steel
brass brass plated plated
2.50 63.5 2.50[x3.5]
.090 2.29 .090[2.29] THK. THK
1.75 44.5 1.75[44.5]
-
hospital tips tips I hospital brass pin I brass pin 1.16 29.4 1.16[29.4]
.250 6.35 BRASS PIN
3.30 83.7 1.45 36.9 145[361]
1.75 44.5
.266 6.75 THRU THRU WITH WITH 0.266[6.75] .34[8.641 [8.64] xx 82. 82 CSINK C'SINK 0.34 (5) PLACES
.88 22.2 88[22.2]
.32 8.1 1.06 27.0
1.75 44.5 .75[44.5]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
227 227
Hinges
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Cast Enclosure Covers Cast Enclosure Hinges Hinges with with Fastener Fastener Covers
MI
Dim Dim Dim Dim Dim Dim Dim Dim A B C D A
Dim Dim EE
Dim Dim Dim Dim FF G G
4.09 2.95 1.89 3.94 4.09 2.95 1.89 3.94 [104.0] [75.0] [75.0] [48.0] [48.0] [100.0] [100.0] [104.0]
3.23 3.23 [82.0] [82.0]
1.18 1.18 [30.0] [30.0]
2.05 .67 .67 2.05 Ø.224 [5.70] xx.40 .40 [10.2] [10.2] 0.224 [5.70] [52.0] [17.0] [17.0] [52.0]
H2076-01 600 H2076-01
3.39 2.44 2.44 1.65 1.65 339 [86.0] [62.0] [62.0] [42.0] [42.0] [86.0]
3.15 3.15 [80.0] [80.0]
2.16 2.16 [55.0] [55.0]
.98 .98 [25.0] [25.0]
.57 .57 [14.5] [14.5]
Ø.205 [5.20] xx .31 [8.0] 0.205 [5.20] 31 [8.0]
1.69 1.69 [43.0] [43.0]
H2076-02 QV H2076-02
2.48 2.48 [63.0] [63.0]
2.36 236 [60.0] [60.0]
1.57 1.57 [40.0] [40.0]
.78 .78 [20.0] [20.0]
.45 .45 [11.5] [11.5]
Ø.165 [4.20] xx .22 .22 [5.5] [5.5] 0.165 [4.20]
1.24 1.24 [31.5] [31.5]
Part No.
C
H2076 H2076
1.78 1.19 1.78 1.19 [45.40] [30.40] [30.40] [45.40]
material: die die cast cast zinc zinc I material: finish: chrome I finish: chrome plated plated stainless steel steel pin pin I stainless
Dim Dim H H
Dim Dim J
(2) brushed, stainless steel I (2) brushed, stainless steel covers covers (3) brass I (3) brass washers washers (2) retaining retaining rings I (2) rings DIM D.
.--
DIM E CENT. DIM G
DIM F
DM F - '" -~CENT. I 0
ElD DIM J
DIM I A
DIM B DI MB CENT.
ED
ED
0
ED
_ l' DIM C CENT.
ED DIM H
Hinge Pin Hinge Assembly Assembly with with Removable Removable Pin Part Part Number Number
75.0 2.95 [75.0] TYP.
52.0 2.05 [52.0]
40.0 1.57 [40.0] TYP.
Material Material
Finish Finish
H2064ZN H2064ZN
steel steel
zinc plated zinc plated
H2064SS H206455
300 series 300 series stainless steel stainless steel
passivated passivated
hingemay may be be unassembled unassembled by by removing removing I hinge e-clip e-clip and and releasing releasing the the pin pin
.256 6.50 HOLE HOLE 0.256[6.50] (4) PLCS.
TOP T OP VIEW E-CLIP
.61 15.5
21.5 .85 [21.5]
.236 6.00 PIN PIN 0.236[6.00] COLD HEADED
3.66 93.0
16.0 .63 [16.0] TYP.
RIGHT SIDE SIDE VIEW VIEW RIGHT
FRONT VIEW VIEW FRONT
Hinge Pin Hinge Assembly Assembly with with Removable Removable Pin Part Part Number Number 1.44 36.5 1.44[36.5
.354 [9.00] .291 7.40 xx .354 .291[7.40] (2) OBROUNDS .32 8.3 .32[8.3]
E-clip E-clip
Material Material
Finish Finish
H2065 H2065
no no
steel steel
mill mill
H2065-01 H2065-01
yes yes
steel steel
mill mill
pinisis zinc zinc plated with yellow yellow chromate I pin plated with chromate part no. no. H2065-01 can be be unassembled unassembled by by I part H2065-01 can removing removing e-clip e-clip and and releasing releasing the the pin pin
2.36 59.9 2.36[59.9] 1.28 32.5 1.28[32.5]
2.59 65.7 2.59[65.7]
TOP VIEW
.77 19.5 77[19.5]
1.15 29.3
.70 17.8 10[17.8] .96 24.5 .9614.51 .45 11.5 .45[11.5]
2.86 72.7 2.86[72.7 FRONT VIEW VIEW FRONT
228 228
Download 3DmoDELs @ @www.spep.com www.spep.com Download
E-CLIP ON H2065-01 ONLY F12065-01
.244 6.20 PIN PIN 0.244[6.20] COLD HEADED
.65 16.5 .65[16.5]
RIGHT SIDE SIDE VIEW VIEW RIGHT
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industrial Hardware
Cotter Cd Pin
Material Material
Holes Holes
Finish Finish
H1008 H1008
aluminum aluminum
no no
mill mill
not not included included
H100802 H100802
aluminum aluminum
no no
mill mill
included included
.187 4.75 .187[4.75]-1
5.00 127.0 550[127.0]
hingehas hasaaremovable removablesteel, steel, zinc zinc plated pin I hinge plated pin
Hinges
Hinge Pin Hinge Assembly Assembly with with Removable Removable Pin Part Part Number Number
.500 12.70 PIN PIN 0500[12.70] REMOVABLE
4.75 120.7 4.75[120.7] .125 3.18 HOLE HOLE FOR 0.125[3.18] COTTER PIN
.63[16.0] .63[164]
Hinge Pin Hinge Assembly Assembly with with Removable Removable Pin Part Part Number Number
H1009 H1009
Material Material
Cotter Cotter Pin Pin
Holes Finish Holes liFinish
aluminum yes mill included included aluminum yes mill
hingehas hasaaremovable removablesteel, steel, zinc zinc plated pin I hinge plated pin includesstainless stainless steel steel bushings bushings& & cotter pin I includes cotter pin
3.63 92.1
.177 4.50 .177[4.50]-..
.406 10.31 (3) HOLES
.500 12.70 PIN PIN 0.500[12.70] REMOVABLE
4.75 120.7
CL
.88 22.2 TYP.
5.00 127.0
.61 15.6 .81[15.6]
Stainless Steel Steel Butt Butt Hinge Stainless Hinge Part Part No. No.
H2285SS H228555
Material Material
Finish Finish
304SS 304SS
brushed brushed
111
1.46 [37.0] 37.0 1.46 22.5 .89 [22.5] .89 CENT. CENT.
r an .91 23.0
.079 [2.00] 2.00 .079
PIN CAP ON ON ONE END END ONE
.193 [4.90] 4.90 0.193 HEADED PIN PIN
1.38 [35.0] 35.0 91 [23.0] 1.38 CENT. In:1E1E11 CENT. .205 [5.20] 5.20 HOLE HOLE WITH 0.205 .315 [8.00] [8.00] xx 90° 90 C'SINK 0.315 (4) PLACES PLACES (4)
EW PRODUCT
AMILY
Part Part No. No.
Dim A Dim A
Dim B Dim B
H2271SS-01 H227155-01
1.378 [35.00] 1378 [35.00]
1.00 [25.4] [25.4] 1.00
H2271SS-02 H227155-02
1.870 [47.50] 1.870 [47.50]
1.43 [36.2] [36.2] 1.43
Stainless Steel Butt Butt Hinges Stainless Steel Hinges
1.50 [38.0] 38.0 1.50
material: 304SS 304SS I material: finish: brushed I finish: brushed
.89 [22.5] 22.5 .89 CENT. CENT.
.06 1.5 .06[1.5] THK. THK
A
part H2271SS-01 part no. no. H227155-01
.24 [6.0] 6.0 0.34 PIN PIN DIM AA DIM DIM B B DIM PIN CAP CAP ON PIN ON BOTH ENDS ENDS BOTH A
.217 [5.50] 5.50 HOLE HOLE WITH WITH 0.217 .295 [7.50] [7.50] X X 90° 90° C'SINK C'SIN 0 .295
part H2271SS-02 part no. no. H227155-02
(4) PLACES PLACES (4)
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
229 229
Hinges
..." M"
"WU°
PRODUCTS
Black Stainless Black Stainless Steel Steel Butt Butt Hinge Hinge
C
3.95 [100.3] 100.3 3.95
Part Number Part Number
Material Material
Finish Finish
12SS30401BK 125530401 BK
304SS 304SS
black powder black powder
obrounds on on top top leaf leaf have have aa horizontal ►obrounds horizontal orientation and and bottom bottomobrounds obroundshave have aa orientation vertical orientation vertical orientation
.110 2.80 .110[2.80] -1 .421 10.70 x.539 x .539 [13.69] [13.69] .421[10.70] (4) OBROUNDS OBROUNDS (4)
1.48 37.7 1.48 [37.7] TYP. TYP.
.59 14.9 ] .59[14.9 TYP. TYP .80 20.2 .80[20.2
R.63 16.0 ] R.63[16.0 (4) PLACES PLACES (4)
2.36 59.9 2.36[59.9]
.315 8.00 PIN PIN 0.315[8.00] STAKED IN IN PLACE PLACE STAKED
Stamped Butt Hinges Hinges Stamped Butt Part Number Part Number
2.13 54.0 2.13[54.0] CENT.
Finish Finish
H2099NP H 2099N P
steel steel
nickel nickel plated plated
H2099SS H209955
304SS 304SS
satin satin
H2099BK H2099BK
steel steel
zinc plated zinc plated then then black black powder powder coated coated
.094 2.38 OFFSET OFFSET .094[2.38] TYP. TVP.
8-32 THREAD (2) PLCS.
1.50 38.1 1.50[38.1]
Material Material
.235 5.97 HOLE HOLE WITH WITH 0.235[5.97] .305 [7.75] [7.75] xx 82° 82 C'SINK 0.305 (2) PLCS.
.39 9.9 .39[ 9.9]
.83 21.2 .83[21.2] +.25 +.010 3611 10[9.18... 25] ..361 - .000 00 9.18 .00 00
.90 22.8 .90[22.8]
0.1417[3.600] .1417 3.600 PIN PIN STAKED
1.88 47.6 1.88[47.6]
.075 1.90 THK.
2.50 63.5 2.50[63.5]
Butt Hinge Hinge with withReverse Reverse Assembled Assembled Formed Butt Formed Leaf Leaf Part No. Part No.
.89 [22.5] 22.5 .89 CENT. CENT.
Mre
0
14.2 .56 [14.2]
brushed brushed
Part No. Part No.
Leaf Material Leaf Material
Pin Material Pin Material
steel steel
nickel nickel plated plated
14.4 .57 [14.4] .57
.236 6.00 PIN PIN 0.236[6.00]
(INEME)
.69 [17.5] 17.5 .69
(2) PIN CAPS
12.7 .50 [12.7]
.059 1.50 .059 [1.50]
Stamped Stamped Butt Butt Hinge Hinge
• 1.50 38.1 .189 4.80 PIN
---
Finish Finish
304SS 304SS
1.50 [38.0] 38.0 1.50
.217 5.50 HOLE HOLE WITH WITH 0.217[5.50] .331 [8.40] [8.40] xx 90° 90 C'SINK C'SINK 0.331 (4) PLACES
.81 [20.6] 20.6 .81
Material Material
H2266SS H226655
.92 23.4
.52 13.1
H2005 H2005
.063 1.59 THK.
.75 19.1 1.56 39.7
.19 4.8
.63 15.9 TOP VIEW VIEW IN TOP IN FLAT FLAT
230 230
Download www.spep.com Download3DmoDELs @ @ www.spep.com
.165 4.20 ] HOLE HOLE WITH 0 .165[4.20 .250[6.35 6.35]]xx82 82 ° C'SINK C'SINK 0.250( (4) PLACES
70° STOP
ROTATED SECTION SECTION VIEW ROTATED VIEW Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Material Material
Finish Finish
H2241SS-01 H224155-01
304SS 304SS
brushed brushed
2.34 [59.5] 59.5 2.34
1.57 [40.0] 40.0 1.57
1.06 [27.0] 27.0 1.06
.35 [9.0] 9.0 .35
.79 [20.0] 20.0 .79
Hinges
Stainless Stainless Steel Steel Butt Butt Hinge Hinge Part No. Part No.
.79 20.0 .79[20.0]
.79 20.0 1.57 [40.0] 40.0 .79 [20.0] 1.57 CENT. CENT.
.220 [5.60] 5.60 HOLE HOLE WITH WITH 0.220
CAP CAP ON ON ONE ONE END END
.394 [10.00] [10.00] xx 90 C'SINK C'SINK 0.394 (6) PLACES PLACES (6)
(3) BRASS BRASS BUSHINGS BUSHINGS (3)
.197 [5.00] 5.00 0.197 HEADED PIN HEADED PIN
.098[2.50] 2.50 THK. THK. -.098
Part No. Part No.
Material Material
Finish Finish
H2241SS-02 H224155-02
304SS 304SS
brushed brushed
StainlessSteel Steel Butt Butt Hinge Hinge 1D Stainless 41 1.57 [40.0] 40.0 1.57 TYP. TYP. .79 [20.0] 20.0 .79 TYP. TYP.
.35 [9.0] 9.0 .35 TYP. TYP.
.79 [20.0] 20.0 1.57 [40.0] .79 1.57 40.0 CENT. CENT.
.220 5.60 HOLE HOLE WITH WITH 0.220[5.60]
CAP ON CAP ON ONE ONE END END
.394 [10.00] [10.00] xx 90° 90 C'SINK C'SINK 0.394 (6) PLACES PLACES (6)
(3) BRASS BUSHINGS 26EZG Sss
.197 [5.00] 5.00 0.197 HEADED PIN HEADED PIN
L
.098 [2.50] 2.50 .098 THK. THK
Stainless Stainless Steel Steel Butt Butt Hinge Hinge
-M.
Part No. Part No.
Material Material
Finish Finish
H2241SS-03 H224155-03
304SS 304SS
brushed brushed
•
2.34 [59.5] 59.5 2.34 TYP. TYP. .79 [20.0] 20.0 .79 TYP. TYP.
1.06 [27.0] 27.0 1.06 TYP. TYP.
.79 [20.0] 20.0 .79 [40.0] 1.57 40.0 1.57 CENT. CENT.
.220 [5.60] 5.60 HOLE HOLE WITH WITH 0.220 .394 [10.00] [10.00] x90 x 90 ° C'SINK 0.394 CSINK (6) PLACES PLACES (6)
CAP ON CAP ON ONE END END ONE
(3) BRASS BRASS (3) BUSHINGS BUSHINGS
.197 [5.00] 5.00 0.197 HEADED PIN HEADED PIN
7
.098 [2.50] 2.50 .098 THK. THK.
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
231 231
Hinges
Die Cast Zinc Butt Hinge .59 15.0 .59[ 15.o]
C
M8 THREAD (4) STUDS
.31 8.0 -8118.81
Part rt Number ber
H2082 H2082
Material Material
Finish Finish
die cast zinc die cast zinc
black black powder powder coated coated
steel,zinc zinc plated plated threaded threaded studs studs I steel, stainlesssteel, steel, passivated passivated pin I stainless pin
1.77 45.0
4.72 120.0 4.72[ 20.0]
1.77 45.0
.295 7.50 P PIN 0.295[7.50]
2.36 60.0 2.96[60.0]
1.42 36.0 CENT.
.55 14.0 .55[14.0]-.1
FRONT VIEW FRONT VIEW
REAR VIEW REAR VIEW
RIGHT VIEW RIGHT SIDE SIDE VIEW
Die Cast Cast Zinc Die Zinc Butt Butt Hinges Hinges Part Part Number Number
H2072 H2072 .60 [15.3] 15.3 .60
H2072-01
MOUNTING MOUNTING 4.09, H2072-01 (4) PLACES PLACES (4)
.31 [8.0] 8.0 -•-• .31
part no. H2072
part no. no. H2O H2072-01 72-01 part
.315 [8.00] 8.00 PIN PIN 0.315
2.36 [60.0] 60.0 2.36
'
1.73 44.0
1.42 [36.1] [36.1] 1.42 CENT.
.50 [12.7] MIN.
FRONT VIEW FRONTVIEW
M8 threaded M8 threaded studs studs Ø8.40mm hole 08.40mm hole with with Ø16.50mmxx 90° 90° c'sink c’sink 016.50mm
material:die diecast cast zinc zinc I material: finish:black black powder powder coated coated I finish: steel,nickel nickel plated plated pin pin && threaded threaded studs studs I steel,
.71 [18.0]
3.54 [90.0] 90.0 3.54
Mounting Mounting
REAR VIEW REAR VIEW
RIGHT VIEW RIGHT SIDE SIDE VIEW
Cast Butt Cast Butt Hinges Hinges Part Number Number 'Part .45 [11.5] 11.5 .45 .24 [6.0] 6.0 .24
MOUNTING (4) PLACES
.59 15.0
.236 6.00 PIN
1.97 [50.0] 50.0 1.97
1.18 [30.0] 30.0 1.18 CENT.
.50 [12.7] MIN.
FRONT VIEW VIEW
RIGH VIEW HIGH SIDE SIDE VIEW
H2073-03 H2073-03 H2073SS-03* H207355-03*
.59 15.0 1.97 50.0 1.97 [50.0]
part no. H2073 H2073 part no.
H2073 H2073
Mounting Mounting
Finish Finish
M6 threaded M6 threaded studs studs black black powder powder Ø6.30mm hole 06.30mm hole with with coated Ø12.50mm xx90° 012.50mm 90°c’sink c'sink coated Ø6.30mm hole 06.30mm hole with with Ø12.50mmxx 90° 90° c'sink c’sink 012.50mm
brushed brushed
material:die diecast cast zinc zinc I material: steel,nickel nickel plated plated pin pin && threaded threaded studs studs I steel, * H2073SS-03 ►* H207355-03 304SS 304SSleaves leaves&&pin pinwith with brushed brushed finish finish
REAR VIEW REAR VIEW
part no. H207355-03 H2073SS-03 part no.
Cast Butt Cast Butt Hinges Hinges Part Number Part Number
.59 15.0 .31 8.0
MOUNTING MOUNTING (4) (4) PLACES
.71 18.0
.71 18.0 .31 8.0
FRONT VIEW FRONT VIEW
Download 31:Immo @@www.spep.com www.spep.com 232 Download 232
14.5 .57 [14.5 STUD MOUNTING RIGHT VIEW RIGHT SIDE SIDE VIEW
Finish Finish
M8 threaded studs M8 threaded studs
H2073-04 H2073-04
Ø8.40mm 08.40mm hole hole with with Ø16.50mm 90° c'sink c’sink 016.50mm xx 90°
black black powder powder coated coated
H2073SS-04* H207355-04*
Ø8.40mm 08.40mm hole hole with with Ø16.50mm 90° c'sink c’sink 016.50mm xx 90°
brushed brushed
material:die diecast cast zinc zinc I material: steel, nickel nickel plated plated pin threaded studs studs I steel, pin & &threaded * H2073SS-04 ►* H207355-04 304SS 304SSleaves leaves&&pin pinwith with brushed brushed finish finish
2.36 60.0 2.96I60.0]
2.36 60.0 F.- 2.96 [60.0] Id
Mounting Mounting
H2073-01 H2073-01
36.0 1.42 [36.0] CENT. REAR VIEW REAR VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
- -1 Industrial inrit ictrinlHardware V' -1. • • Hinges and
Part Part Number Number
H2073-02 H2073-02
Mounting Mounting
Finish Fin
1/4-20 threaded threaded studs 1/420 studs
black black powder powder coated coated
.45 11.5 .45[11.5]
MOUNTING MOUNTING (4) (4) PLACES PLACES
.28 7.2 .28[7.2]
material: die die cast cast zinc zinc I material: steel, nickel nickel plated I steel, plated threaded threaded studs studs steel, nickel nickel plated pin I steel, plated pin
Hinges
Die Die Cast Cast Zinc Zinc Butt Butt Hinge Hinge
.51 13.0 .51[19.0] 1.57 40.0 .51 13.0 .51[19.0] .236 6.00
2.13 54.0
1.50 38.0
.46 11.8 .46[11.8]
FRONT VIEW FRONT VIEW
REAR VIEW REAR VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
Die Die Cast Cast Zinc Zinc Butt Butt Hinges Hinges Part Part Number Number
Finish Finish
Mounting Mounting
black black powder powder coated coated
H2081 H2081 H2081CH* efijr) H2081CH*
M6 M6 threaded threaded studs studs
H2081SC* EMPH20815C*
bright bright chrome chrome plated plated satin chrome satin chrome
black black powder powder coated coated Ø6.30mm hole with with 06.30mm hole chrome plated plated H2081CH-02 Ø11.20mm affiH2081CH-02 011.20mm xx90° 90°c’sink c'sink chrome
H2081-02 H2081-02
darli H2081SC-02 H2081SC-02
.45 11.5 .45[11.5]
satin chrome satin chrome
MOUNTING MOUNTING (4) PLACES (4) PLACES
.28 7.2 .28[7.2]
material: die die cast cast zinc zinc I material: stainless steel steel threaded I stainless threaded studs studs stainless steel steel pin pin I stainless * H2081CH & H2081SC .47 [12.0] ►* H2081CH & H20815C have have .47 [12.0]long long studs studs
_L .51 13.0 ] .51[13.0 1.57 40.0 .51 13.0 .51[13.0] .236 6.00 P PIN 65.236[6.00] 1.50 38.0 CENT.
.53 13.5 .53[133] STUD MOUNTING MOUNTING STUD
2.11 53.5
REAR VIEW REAR VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW
Cast Butt Cast Butt Hinges Hinges Part Part Number Number
H2080 H2080 H2080-02 H2080-02 age H2080SS-02* H208055-02*
Mounting Mounting
Finish Finish
M5 M5 threaded threaded studs studs
black black powder powder coated coated
Ø5.30mm hole with with 05.30mm hole Ø9.30mm 90° c'sink c’sink 09.30mm xx 90°
black black powder powder coated coated
Ø5.30mm hole with with 05.30mm hole Ø9.30mm 90° c'sink c’sink 09.30mm xx 90°
.35 9.0 35[9.0]
MOUNTING (4) PLACES
.20 5.0 -•-.20[5.0]
part part no. no. H2080 H2080
brushed brushed .49 12.5 .49[12.5]
material: die die cast cast zinc zinc I material: *H2080SS-02 comes in stainless I *H208055-02 comes in stainless steel steel stainless steel steel threaded I stainless threaded studs studs stainless steel steel pin pin I stainless
1.57 40.0 1.57[40.0] .49 12.5 .49[12.5] .157 4.00 PIN PIN 0.157[4.00] .47 12.0 .47[12.0]
1.57 40.0 1-.-1.57[40.01-•-1
.98 25.0 CENT.
STUD MOUNTING MOUNTING STUD
FRONT VIEW FRONT VIEW
REAR VIEW REAR VIEW
RIGHT SIDE RIGHT SIDE VIEW VIEW
part part no. no. H2080SS-02 H208055-02
Die Die Cast Cast Zinc Zinc Butt Butt Hinge Hinge Part Part Number Number
H2078 H2078
Material Material
Finish Finish
die zinc die cast cast zinc
black black powder powder coated coated
stainless steel, steel, passivated passivated pin pin I stainless
1.42 36.0 1.42[36.0] CENT. CENT.
®
O
.31 8.0 31[8.0
1.50 38.0 1.50[38.0] TYP. TYP.
.31 8.0 PIN 0.31[8.0]P!
2.20 56.0 2.20[56.0] CENT. CENT.
411
6.60 HOLE HOLE WITH WITH 260[6.60] 65 .260 .539 [13.70] [13.70] x x 90 0.539 90° C'SINK CSINK (4) PLACES (4) PLACES
O
2.36 60.0 2.36[60.0] TOP VIEW TOP VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.59 15.0 .59[15.0] RIGHT SIDE RIGHT SIDE VIEW VIEW
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
233 233
Hinges
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Cast Butt Cast Butt Hinges Hinges Part No. Part No.
C
1.97 50.0 1.97[50.0]
H2095 H2095
.24 6.0 .24[6.o]
H2095SS H209555
2.99 76.0] 76.0 2.99
Material Material
Finish Finish
die cast zinc die cast zinc
black black powder coated powder coated
cast 304SS cast 304SS
brushed brushed
2.20 [56.0] 56.0 2.20
.256 [6.50] 6.50 HOLE HOLE W/ W/ 0.256
1.18 30.0 1.18[30.0]
.236 6.00
.492 [12.50] [12.50] xx 90 CSINK C'SINK 0.492 (4) PLCS. PLCS. (4)
Cast Stainless Butt Hinge Cast StainlessSteel Steel Butt Hinge 114 Part Part No. No. 60.0 -.-2.362.36 [60.0] 1.18 30.0 1.18[30.0] CENT. CENT.
Finish Finish
brushed brushed
Part Part No. No.
Material Material
Finish Finish
H2259SS-01 H225955-01
cast 304SS cast 304SS
brushed brushed
.256 6.50 HOLE HOLE WITH WITH 0.256[6.50]
I 2.79 [71.0] 71.0 2.79
Material Material cast 304 SS SS cast 304
H2259SS H225955 .492 [12.50] [12.50] xx 90 CSINK C'SINK 0.492 (4) PLACES PLACES (4)
1.61 41.0 1.61[41.0] CENT. CENT.
! ED
.244 [6.20] 6.20 0.244 STAINLESS STEEL STAINLESS STEE KNURLED PIN KNURLED PIN
.20 5.0 .20[5.0]
Cast Stainless Cast Stainless Steel Steel Butt Butt Hinge Hinge
1.56 39.7 .79 20.0 CENT.
5.50 HOLE .217[5.50] HOLEWITH WITH 0 217 .413 [10.50] [10.50] xx90 0.419 90' C'SINK MINK (4) (4) PLACES PLACES
2.00 50.9
1.28 32.5 CENT. .197 5.00 0.197[5.00] STAINLESS STEEL STEEL STAINLESS KNURLED PIN KNURLED PIN
.16 4.0 .16 [4.0]
Cast Stainless Steel Butt Hinge Cast Stainless Steel Butt Hinge CD Part No. No. Part
Material Material
Finish Finish
H2281SS H228155
cast 304SS cast 304SS
electropolished electropolished
3.15 80.0 3.15 [80.0] 2.36 [60.0] 60.0 2.36 CENT. CENT. A Al i
.315 [8.00] 8.00 .315 THK. THK.
•
2.66 [67.5] 67.5 2.66
1.89 [48.0] 48.0 1.89 CENT. CENT.
1.50 [38.0] 38.0 1.50 CENT. CENT.
A A-4-1
234 234
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
.315 [8.00] 8.00 0.315 PIN PIN
.248 [6.30] 6.30 HOLE HOLE WITH WITH 0 .248 .512 [13.00] [13.00] xx 90° 90 C'SINK C'SINK 0.512 (6) PLACES (6) PLACES
SECTION A-A SECTION A-A
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware Hardware n------11--1..ctrial
Material Material
Finish Finish
H2279BK H2279BK
die cast zinc die cast zinc
black black powder powder coated coated
H2279BK-01 H2279BK-01
die cast zinc die cast zinc
black black powder powder coated coated
steel,nickel nickel plated plated pin pin & & studs studs I steel, 1.97 50.0 1.97 [50.0] -1
.45 [11.5] 11.5 .45
.51 13.0 51 [13.0]
Hinges
Die Cast Cast Zinc Die Zinc Butt Butt Hinges Hinges Part No. Part No.
part no. part no. H2279 H2279
.98 25.0 98 [25.0]
1.69 43.0 1.69 [43.0]
.236 [6.00] 6.00 0.236 KNURLED PIN KNURLED PIN
2.48 [63.0] 63.0 2.48
1.10 [28.0] 28.0 1.10
*I'
.248 [6.30] 6.30 HOLE HOLE WITH WITH 0.248 .49 [12.41 [12.4] xx90° 90 C'SINK 0.49 CSINK (4) PLACES PLACES (4)
1.18 30.0 1.18[30.0] -0-
M6 THD. THD. M6 (4) STUDS STUDS (4)
.24 6.0 .24[6.0]
TOP VIEW TOP VIEW
RIGHT SIDE RIGHT SIDE VIEW VIEW
part no. part no.
H2279-01 H2279-01
RIGHT SIDE SIDE VIEW RIGHT VIEW WITH STUDS STUDS WITH
Die Cast Cast Zinc Die Zinc Butt Butt Hinge Hinge Part No.
H2256BK H2256BK
Material Material
Finish Finish
die cast blackpowder powdercoated coated die castzinc zinc black
steel, nickel nickel plated I steel, plated pin pin stainless steel steel studs studs I stainless .94[24.0] 24.0 -1 .94
.35 9.0 .35 [9.0] -1
.157 [4.00] 4.00 0.157 KNURLED PIN PIN KNURLED
.98 25.0
1.57 40.0 1.57 40.0]
11111M5 THD. (2) STUDS
12.0 .47 [12.0]
BOTTOM VIEW
.20 [5.0] 5.0 .20 END VIEW END VIEW
Die Cast Cast Zinc Die Zinc Butt Butt Hinges Hinges Part No. Part No.
H2257BK H2257BK H2257BK-01 H2257BK-01
Mounting Mounting Ø6.30mm hole with 06.30mm hole with Ø12.50mm 90°c'sink c’sink 012.50mm xx90° M6 threaded studs M6 threaded studs
material:die diecast cast zinc zinc I material: finish: black ►finish: black powder powder coated coated steel,nickel nickel plated plated studs studs I steel,
part no. part no.
H2257BK-01 H2257BK -01 .45 [11.5] 11.5 .45 1.97 50.0 1.97[50.0]
.24 [6.0] 6.0 -0-.24
MOUNTING (4) PLACES PLACES (4)
1.10 28.0 2.99 [76.0] 76.0 2.99 .295 [7.50] 7.50 0.295 PIN
part no. part no.
1.10 [28.0] 28.0 1.10
H2257BK H2257BK
1.18 [30.0] 30.0 1.18 CENT. CENT.
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 MIN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
235 235
Hinges
MUM% REIM 11,,ine ENGINEERING AND PPODUCTS
Die Butt Hinge Die Cast CastZinc Zinc Butt Hinge ID Part Part No. No.
C
H2280BK H2280BK
Material Material
Finish Finish
die die cast cast zinc zinc
black black powder powder coated coated
steel,nickel nickel plated plated pin pin & & studs I steel, studs
3.54 [90.0] 90.0 3.54
.59 [15.0] 15.0 .59 M8 M8 THD. THD. (6) (6) STUDS STUDS
2.36 [60.0] 60.0 2.36
1.42 36.0 1.42 [36.0] .319 [8.10] 8.10 0 .319 KNURLED KNURLED PIN PIN
1.26 [32.0] 32.0 1.26 1.26 [32.0] 32.0 1.26
.57 14.5 .57 [14.5]
.31 8.0
BOTTOM VIEW BOTTOM VIEW
Die Die Cast Cast Zinc Zinc Butt Butt Hinges Hinges
END VIEW END VIEW
)DUC T AMILY
pPart No.
Mounting Mounting
Finish Finish
H2282BK H2282BK
M6 M6 threaded threaded studs studs
black black powder powder coated coated
H2282BK-01 H2282BK-01
Ø6.10mm 06.10mm hole hole with with Ø13.50mm x 013.50mm x 90° c’sink 90° c'sink
black black powder powder coated coated
art No.
material: die die cast cast zinc zinc I material: steel,nickel nickel plated plated pin pin & & studs I steel, studs 1.97 50.0 1.97[50.0]
r
.240[6.10] HOLEWITH WITH 6.10 HOLE 0.240 .53[13.5] [13.5] xx90° 90 C.SINK C'SINK 0.53 (4) (4) PLACES PLACES
.24 [6.0] 6.0 .24
.49 12.5 49[12.5]
.236 6.00 PIN PIN 0.236[6.00] 2.99 76.0] 76.0 2.99
2.20 56.0] 56.0 2.20
M6 M6 THD. TED. (4) STUDS (4) STUDS
.45 11.5 .45[11.5]
1.18 [30.0] 30.0 1.18
END VIEW END VIEW
TOP VIEW VIEW TOP
END VIEW END VIEW
WITH STUDS WITH STUDS
Die Die Cast Cast Zinc Zinc Butt Butt Hinge Hinge Part Part No. No.
H2275BK H2275BK
Material Material
Finish Finish
die zinc die cast cast zinc
black black powder powder coated coated
steel, nickel nickel plated pin I steel, plated pin steel, black black powder I steel, powder coated coated studs studs 1.96 49.8
.46 11.6 .46[11.6]
M6 THD. M6 THD. (4) STUDS (4) STUDS 2.92 74.2
2.20 56.0 .240 6.10 PIN PIN 0.240[6.10]
1.18 30.0 BOTTOM VIEW BOTTOM VIEW
236 236
Download 31)moDELs @ @www.spep.com www.spep.com Download
.49 [12.5] 12.5 .49
.24 6.0 24 [6.0] END VIEW END VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware Hardware n------11--1..ctrial
Mounting Mounting
I
Ø8.40mm hole with with 08.40mm hole Ø16.50mm 90° c'sink c’sink 016.50mm xx 90°
H2269BK H2269BK H2269BK-01 H2269BK-01
M8 M8 threaded threaded studs studs
steel, nickel nickel plated pin I steel, plated pin steel, nickel nickel plated I steel, plated studs studs
Hinges
Die Die Cast Cast Zinc Zinc Butt Butt Hinges Hinges Part Part No. No.
part part no. no.
.331[8.40] 8.40 HOLE HOLE WITH WITH 0.331 .65 [16.5] [16.5] xx90° 90 OSINK C'SINK 0.65 (4) PLACES
2.36 60.0 r-238[600]
8.0 .31 [8.0]
H2269BK H2269BK
M8 THD. (4) STUDS
.315 8.00 PIN PIN 0.315[8.00]
4.72 [120.0 20.0]
88.0 3.46 [88.0]
part part no. no.
H2269BK-01 H2269BK-01
36.0 1.42 [36.0]
15.0 .59 [15.0]
14.5 .57 [14.5]
Heavy Heavy Duty Duty Butt Butt Hinges Hinges Material Material
Finish Finish
H2219BK H2219BK
cast cast steel steel
black black painted painted
H2219G H2219G
cast cast steel steel
gray gray painted painted
Part Part Number Number
stainless steel steel pin pin I stainless
6.30 160.0 8.30[180.0]
.91 23.0 .91[23.0]
2.76 70.0 CENT.
3.54 90.0 CENT.
4.72 120.0
4.72 120.0 CENT.
.394 10.00 0.394[10.00] PIN PIN
.413 10.50
.31 8.0
(6) HOLES HOLES (8)
Part Part No. No.
H2233 H2233
CD
Material Material
Finish Finish
die zinc die cast cast zinc
matte black, lightly lightly matte black, textured textured
Die Die Cast Cast Zinc Zinc Hinge Hinge with with Screw Screw Covers Covers
covers material: material: nylon nylon I covers steel, nickel nickel plated pin I steel, plated pin includes(4) (4) steel steel screws screws I includes 1.93 49.0 1.93 [49.0]
M4-0.7 THD. THD. M4-0.7 (4) PLCS. PLCS. (4)
0 0 1.72 43.7 1.72 [43.7]
.98 25.0
21.9 .86 .86 [21.9] .47 12.0
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
237
ilr•W BIM NEM l'alrin1
Hinges
ni ENGINEERING AND PRODUCTS
EnclosureHinge Hinge411PIID Enclosure Part Part Number Number
H2216 H2216
Material Material
Finish Finish
die cast zinc die cast zinc
smooth black smooth black powder coated powder coated
steel, nickel ►pin: pin: steel, nickel plated plated studs:stainless stainless steel, steel, black I studs: black powder powder coated coated brass bushings bushings I brass 2.13 [54.0] 54.0 2.13 CENT.
2.74 69.6
.209 5.30 HOLE HOLE 0.209[5.30] (4) PLCS.
.40 10.2
.71 [18.0] 18.0 .71 CENT.
.13 3.2 .236 6.00 PIN
2.24 57.0
1.22 31.0
.40 10.1
1.42 36.0
M5 STUDS STUDS M5 (3) PLCS. PLCS. (3)
FRONT VIEW FRONT VIEW
RIGHT SIDE RIGHT SIDE VIEW VIEW
1.18 [30.0] 30.0 1.18 CENT. 2.36 [80.0] 60.0 2.38 CENT.
POSITIONING EXTRUSIONS (2) PLCS. PLCS. (2)
REAR VIEW VIEW REAR
Cast Hinge Offset Leaves Leaves Cast Hinge with with Offset Part No. Part No.
1.181 30.00
H2079 H2079
1.339 34.00 1339[34.00]
LIE
Finish Finish
die cast zinc die cast zinc
black textured black textured
stainless steel steel pin I stainless pin
ill
2.74 69.5 2.74[89.5]
Material Material
.01
1.575 40.00
2.36 60.0
.213 5.40 HOLE HOLE WITH WITH '6.213[540] .398 [10.10] [10.10] xx 82 82 • C'SINK 0.395 CHINK (4) PLCS.
47.0 1.85 (ax[47.0] .24 6.0 24[8.0] .77 19.5 .T7[19.5]
.55 14.0 .55[14.0]
Die Cast Cast Zinc Die Zinc Hinge Hinge
.256 6.50 PIN 0.2sele.sol
_..1814.01 .16 4.0
CD
Part No. Material Finish Finish -~rial M6 THREAD X .35 [9.0] DEEP (2) PLACES
H2247BK H2247BK
die cast zinc die cast zinc
matte black black matte
plastic pin I plastic pin
25.0 .98 [25.0] CENT. 1.97 [50.0] 50.0 1.97
.256 [6.50] [6.50] HOLE HOLE WITH 0.256 .488 [12.40] 12.40 XX 90°C'SINK 90°C'SINK 0.488 (2) PLACES
TOP VIEW TOP VIEW
1.00 25.5 .69 17.5 .30 7.5
II "11
1.57 40.0 1.57 [40.0]
60.0 2.36 [60.0] FRONT VIEW FRONT VIEW
238
Download @www.spep.com www.spep.com Download31)moDELs @
1.28 32.5
23.0 .91 [23.0] 32.5 1.28 [32.5] RIGHT SIDE SIDE VIEW RIGHT VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
and Industrial Hardware 'Hinges n--- ----1 Industrial 1-frrdware
H2253BK-01 H2253BK-01
Material Material
Finish Finish
die cast zinc die cast zinc
black black powder coated powder coated
1.18 [30.0] 30.0 1.18
1.97 [50.0] 50.0 1.97 17.0 .67 [17.0] TYP. TYP.
steel, nickel nickel plated plated pin I steel, pin
Hinges
DieCast Cast Zinc Zinc Butt Butt Hinge 4/11) Die Hinge Part No. Part No.
.2165 [5.500] [5.500] HOLE HOLE WITH WITH 0.2165 .433 11.00 X90° X 90° CSIN C'SINK 0.433[11.00] (6) PLACES PLACES (6) .79 [20.0] 20.0 .79 TYP. TYP.
1.57 [39.8] 39.8 1.57 TYP. TYP.
3.94 [100.0] 100.0 3.94
.205 5.20 0.205[5.20] C.D.S. PIN C.D.S. PIN 11.0 .43 [11.0] .43 5.0 .20 [s.0]
Die Cast Cast Zinc Die Zinc Butt Butt Hinge Hinge Part No. Part No.
H2253BK-02 H2253BK-02
Material Material
Finish Finish
die cast zinc die cast zinc
black black powder coated powder coated
.67 17.0 TYP.
steel, nickel plated pin
1.18 30.0 TYP.
20.0 .79 [20.0] .79 TYP.
1.57 39.8 TYP.
.2165 [5.500] [5.500] HOLE HOLE WITH 0.2165 .433 [11.00] 11.00 X90° X 90° C'SIN C'SINK 0.433 (6) PLACES
3.15 80.0
5.20 .205 [5.20] 0.205 C.D.S. C.D.S. PIN PIN
1
.43 11.0 .o] .43[n
.20 [5.0] 5.0 .zo
Die Cast Cast Zinc 411ID Die Zinc Butt Butt Hinge Hinge Part No. Part No.
H2253BK-03 H2253BK-03
Material Material
Finish Finish
die cast zinc die cast zinc
black black powder coated powder coated
steel, nickel plated pin
1.97 50.0 1.97 [50.0]
1.97 50.0 1.97 [50.0]
.2165[5.500] [5.500] HOLE HOLE WITH WITH 0.2165 .433 [11.00] 11.00 X X 90° 90° C'SINK C'SINK 0.433 (6) PLACES (6) PLACES
.67 [17.0] 17.0 .67
.67 [17.0] 17.0 .67
.79 [20.0] 20.0 .79 TYP. TYP.
1.57 39.8 1.57 [39.8] TYP. TYP.
4.72 [120.0 4.72 20.0]
5.20 .205 [5.20] 0.205 C.D.S. PIN PIN C.D.S.
tl
.43 [11.0] 11.0 .43
.20 [5.0] 5.0 .20
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
239 239
Hinges
Ar""C ENGINEERING AND PRODUCTS
Die Cast Cast Zinc Die Zinc Hinge Hinge Part No. Part No.
1.89 48.0 1.89 [48.0]
H2251BK H2251BK .59 15.0
Finish Finish black black powder powder coated coated
die cast cast zinc die zinc
steel,nickel nickel plated plated pin I steel, pin
.47 12.0 .47[12.0] 25.0 .98 [25.0] .98 CENT. CENT.
Material Adria!
.244 6.20 HOLE HOLE WITH WITH 0.244[6.20] .492 [[12.50]x 12.50 ] x 90° 90 C'SINK C'SINK 0.492 (2) PLCS. PLCS. (2)
TOP VIEW
.177 [4.50] 4.50 .177 THK. THK.
.244 [6.20] 6.20 HOLE HOLE WITH WITH 0.244 .441 [11.20 [11.20 ]] xx90° 90 C'SINK 0.441 CSINK
D
1.00 25.5 1.00 [25.5]
.59 [15.0] 15.0 .59
1.37 34.8 1.37 [34.8]
1.21 30.8 1.21 [30.8] i!i
19.0 .75 [19.0] -.-1.75
D FRONT VIEW FRONT
SECTION D-D
Die Cast Cast Zinc Die Zinc Hinge Hinge Part No. Part No. .30 7.5 .30 [7.5]
H2254CH H2254CH
Finish Finish
die cast cast zinc die zinc
textured chrome chrome textured plated plated
steel,nickel nickel plated plated pin I steel, pin
.79 20.0 .79 [20.0] CENT. CENT.
14.0 .55 .55 [14.0]
Material Material
TOP VIEW TOP VIEW .173 [4.40] 4.40 HOLE HOLE WITH WITH 0.173 .315 [8.00] [8.00] X X 90° 90° C'SINK C'SINK 0.315 (4) PLACES (4) PLACES
A Ali
.16 4.0 .16 [4.0]
.43 11.0 .43 [11.0]
4
.63 16.0 .63 [16.0]
1.02 26.0 1.02 [26.0]
.75 19.0 .75 [19.0]
.87 22.0 .87 [22.0]
A
20.0 .79 .79 [20.0]
4-
1.89 48.0 1.89 [48.0] SECTION A-A SECTION A-A
FRONT VIEW FRONT VIEW
Butt Hinge Formed Leaf Butt Hingewith withOne One Formed Leaf CD Part No. Part No. .47 [12.0] 12.0 .47 CENT. CENT.
A
1.81 [46.0] 46.0
.335 [a.so] 8.50 0.335 (2) PLACES (2) PLACES
.197 5.00 PIN PIN 0.197[5.00]
.35 9.0 .35[9.0]
H2270BK H2270BK
Material Al Material die cast cast zinc die zinc
Finish Finish black black powder powder coated coated
steel,zinc zinc plated plated pin, pin, mounting mounting bracket, bracket, and I steel, and mounting screw mounting screw
1.56 39.7 1.56 [39.7]
M4 SCREW SCREW M4 (2) PLACES PLACES (2) A
.12 [3.0] 3.0 .12
.98 [25.0] 25.0 .98 CENT. CENT.
•
IT .98 [25.0] 25.0 .98
1.57 40.0 1.57[40.0]
.236 [6.00] [6.00] HOLE HOLE 0.236 472 [12.00] [12.00] xx 114 114° C'SINK CSINK 0 .472 (2) PLACES PLACES (2)
SECTION A-A SECTION A-A
Die Cast Cast Zinc Die Zinc Hinge Hinge
240
Part No. Part No. 1.18 30.0 1.18 [30.0]
.31 8.0 .31[8.0]
f L 1.02 [26.0]
M4 THREAD x
.24 [ 6.0 ]] -7.24[6.0
18.0 .71 [18.0] CENT.
1.02 26.0
-7
Material Material
Finish Finish
castzinc zinc black black powdercoated coated H2250BK diedie H2250BK cast powder
.91 23.0 91 [23.0] CENT.
8.0 .31 [8.0]
(4) PLCS.
castzinc zinc H2250CH diedie H2250CH cast
chrome plated chrome plated
steel,nickel nickel plated plated pin I steel, pin
.39[10.0] 10.0 L39 8.0 .31 [8.0]
FRONT VIEW /IEW
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
RIGHT SIDE VIEW
REAR VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part No. Part No.
Material Material
Finish Finish
H2246BK-01 H2246BK-01
die zinc die cast cast zinc
black black powder powder coated coated
H2246CH-01 H2246CH-01
die zinc die cast cast zinc
dull chrome dull chrome plated plated
pin& & set set screw: screw: steel steel with with nickel nickel plated finish I pin plated finish removablepin pinisis kept kept in in place place by by set screw I removable set screw
2.35 59.8 2.35[59.8]
Die Die Cast Cast Zinc Zinc Hinges Hinges
1.97 50.0 CENT.
.69 [17.5] 17.5 .69
Hinges
.D
EW PP iL T AMILY
.53 13.5 .53[13.5] .77 19.5
1.34 [34.0] 34.0 1.34 .70 17.8 .70[17.8]
M5 THREAD (4) PLCS. PLCS.
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW
1.77 45.0 CENT. REAR VIEW REAR VIEW
Die Die Cast Cast Zinc Zinc Hinges Hinges Part Part No. No.
Material Material
Finish Finish
H2246BK-02 H2246BK-02
die zinc die cast cast zinc
black black powder powder coated coated
H2246CH-02 H2246CH-02
die zinc die cast cast zinc
dull chrome dull chrome plated plated
1.18 30.0 1.18 [30.0]
13.0 .51 [13.0] .51
.87 [22.0] 22.0 .87 CENT. CENT. .39 [10.0] 10.0 .39
1.12 [28.5] 28.5 1.12 15.5 .61 [15.5] .61
t
.73 [18.5] 18.5 .73
M4 THREAD THREAD M4 (4) PLCS. (4) PLCS.
steel, nickel nickel plated pin I steel, plated pin REAR VIEW REAR VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW VIEW FRONT
Die Die Cast Cast Zinc Zinc Hinges Hinges Part Part No. No.
Material Material
Finish Finish
H2246BK-03 H2246BK-03
die zinc die cast cast zinc
black black powder powder coated coated
H2246CH-03 H2246CH-03
die zinc die cast cast zinc
dull chrome dull chrome plated plated
1.18 [30.0] 30.0 1.18
.87 22.0 .87[22.0] CENT. CENT.
.51 13.0 51 [13.0] 10.0 ll .39 .39 [10.0]
M4 THREAD THREAD M4 (4) PLCS. PLCS. (4)
.87 22.0 .842.0]
13.0 .51 51 [13.0] .35 [9.0] 9.0 tl .35
steel, nickel nickel plated pin I steel, plated pin
(j)i I 1
RIGHT SIDE SIDE VIEW VIEW RIGHT
FRONT VIEW VIEW FRONT
REAR VIEW REAR VIEW
Aluminum Hinge Aluminum Hinge Block Block Part Part No. No.
H2277BK H2277BK
Material Material
Finish Finish
cast cast aluminum aluminum
black black powder powder coated coated
.315 [8.00] 8.00 0.315 PIN PIN
.47 [12.0] 12.0 .47
.98 [25.0] 25.0 .98 CENT. CENT.
1.22 31.0 1.22 [31.0]
.83 21.00] 83 [21
steel, nickel nickel plated pin I steel, plated pin
FRONT VIEW FRON T VIEW
END VIEW END VIEW
1.77 45.0 1.77 [45.0]
.79 [20.0] 20.0 .79
62.0 2.44 [62.0] CENT. 3.15 [80.0] 80.0 3.15
►
BOTTOM VIEW BOTTOM VIEW
Die Die Cast Cast Zinc Zinc Hinge Hinge Blocks Blocks Part Part No. No.
Dim Dim Dim Dim D Dim im Dim D im D Dim A B C D E A B C
Thread Thread
H2255BK-01 H2255BK-01
2.48 2.48 [63.0] [63.0]
1.69 1.69 [43.0] [43.0]
0.51 0.51 [13.0] [13.0]
0.63 0.63 [16.0] [16.0]
0.78 0.78 [19.8] [19.8]
M8 M8
H2255BK-02 H2255BK-02
1.77 1.77 [45.0] [45.0]
1.26 1.26 [32.0] [32.0]
0.46 0.46 [11.6] [11.6]
0.55 0.55 [14.0] [14.0]
0.59 0.59 [15.0] [15.0]
M6 M6
material: die die cast cast zinc zinc I material: finish: black I finish: black powder powder coated coated steel, nickel nickel plated pin I steel, plated pin
THREAD (3) PLACES
DIM C C DIM
DIM D D DIM DIM C C DIM DIM D D DIM
DIM A A DIM
END VIEW END VIEW
FRONT VIEW FRONT VIEW DIM E
DIM B BOTTOM VIEW BOTTOM VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
241 241
Hinges
NUMB NEM lb
E .._... "rERING AND PRODUCTS
Die Cast Cast Zinc Die Zinc Hinge Hinge Block Block .236 [6.00] 6.00 0.236 STEEL PIN PIN STEEL
C
Part Part No. No.
.79 [20.0] 20.0 .79 CENT. CENT.
.39 [10.0] 10.0 .39
.65 [16.5] 16.5 .65
.41 10.5 .41[10.5] END VIEW END VIEW
Finish Finish
die cast zinc die cast zinc
black black powder powder coated coated
steelpin pin with withnickel nickel plated plated finish finish I steel
FRONT VIEW FRONT VIEW
M6 THREAD THREAD xx M6 .252 [7.50] [7.50] DEEP DEEP .252 (4) PLACES PLACES (4)
H2276BK H2276BK
Material Material
1.32 33.5 , 1.32 [33.5] 1
.47 [12.0] 12.0 .47 1.91 48.5 1.91[48.5] CENT. CENT. 2.48 63.0 2.48[610] BOTTOM VIEW BOTTOM VIEW
Concealed Hinge Concealed Hinge Housing Pin Housing Pin Part Part Number Material Finish Finish Material Material Finish Finish Number Material
.512 13.00
D446 D446
1_I 040,, ■
plastic plastic
die cast die cast zinc zinc
black black
.20 5.0
zinc zinc pated pated
.00 +.00 .394 39437[10.0Q:75 °] - .01 10.00-.15 FOR 10 10 MM MM HOLE HOLE FOR
.06 1.5
1.91 48.5 1.91[48.5]
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
.79 20.0
Hinge Block Block Hinge .194 4.93 HOLE HOLE WITH 0 .194[4.93] .385 [9.78] .055 [1.40] [1.40] DEEP DEEP 0 .385 [9.78] xx .055 C'BORE, (2) (2) PLCS. CSORE,
Part Number
95SS 9555
Material Material
Finish Finish
304SS 304SS
mill mill
acceptsaa .313 .313 [7.94] [7.94] diameter I accepts diameter rod rod
.65 16.4 65[16.4]
1.30 32.9 1.30[32.9]
NYLON INSERT
.69 17.4 .89[17.4]
.26 6.7 .28[8.7] 1.84 46.7 1.84[ 48.7]
Plastic Hinge Block Plastic Hinge Block .201 5.11 0.201[5.11] (2) HOLES
Part Number Part Number
95P 95P
1.01 [25.8] 25.6 1.01
Material Material
Finish Finish
plastic plastic
natural natural
acceptsaa .313 .313 [7.94] [7.94] diameter I accepts diameter rod rod
.33 8.3 33 )8.3] 1.31 [33.3 33.3 1.31
.322 8.18 HOLE HOLE 0.322[8.18] x .40 [10.2] DEEP
18.0 .71 [18.0]
8.9 .25 6.55] .35 25 [8 35 [9 9] 1.85 47.1 1.85[47.1]
t
Hinge Block Hinge Block CD A
Part Part No. No.
M6 THREAD M6 THREAD (2) (2) PLCS. PLCS.
H2260 H2260
.39 10.0 .240 [6.10] 6.10 PI PIN 0.240
440 242 242
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
.59 15.0 CENT.
A
1.10 28.0
Material Material
Finish Finish
steel steel
zinc plated zinc plated
.30 7.5 .51[13.0] 13.0 [30 [7[5] 51 .51 [13.0] 13.0 .51 SECTION A-A SECTION A-A Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hardware Hinges any Industrial "1-' -
Material Material
Finish Finish
H2260-01 H2260-01
steel steel
zinc plated zinc plated
H2260SS-01 H226055-01
304SS 304SS
mill mill
Part No. Part No.
Material Material
.319 8.10 PI PIN 0.319[8.10]
Finish FinJ
304SS 304SS
M8 THD. (2) PLACES
A
HingeBlocks Blocks Hinge
.55 14.0
39[10 0] .71 18.0 71 [18.0] .63 16.0 63[16.0]
1.28 32.5
SECTION A-A
CD
M6 THD. (3) PLACES
A
brushed brushed 14.0 .55 [14.0]
.39 10.0
A
.65 16.5 CENT.
H2003SS H200355
6
Hinges
Part No. Part No.
Hinge Block Hinge Block
.39 10.0 MB II MB 39[10.0] TYP.
OM Ellie Ma
.236 6.00 PI PIN 0.236[6.00]
.30 7.5 .53 13.5
.47 12.0
A 1.02 26.0 1.02[26.0] CENT. 1.50 38.0 1.50[38.0]
SECTION A-A
Carbon Steel Steel Hinge Block with Studs Carbon Hinge Block with Threaded Threaded Studs Part Number Part Number
Material Material
Finish Finish
steel steel
zinc plated zinc plated
H2004-01 H2004-01
.31 [8.0] 8.0 .31
.31 [7.9] 7.9 .31
1.30 33.1 ] .30 [33.1 CENT. CENT. TOP VIEW TOP VIEW
1.93 [49.0] 49.0 1.93
M10 xx 1.5 1.5 THD. M10 THD. M8 xx 1.25 1.25 THD. M8 THD.
_ 7118o]
1.27 [32.2] 32.2 1.27 TYP. TYP.
1.65 [41.9] 41.9 1.65
.71 18.0
.83 21.1 .83[21.1] .63 [15.9] 15.9 .63 TYP. TYP.
.63 [15.9] 15.9 .63 TYP. TYP. FRONT VIEW VIEW FRONT
RIGHT SIDE SIDE VIEW VIEW RIGHT
AR Part No. Part No.
H2262 H2262
Material Material
Finish Finish
steel steel
chrome plated chrome plated
1.18 30.0 i.18[38.8]
h
Steel Block Steel Hinge Hinge Block
M8 (3) PLACES 12.0 .47 [12.0] 1.10 [28.0] 28.0 .63 16.0 83[8.0]
1.65 42.0 1.85[42.0]
Hinge Block Hinge Block Description Description
Material Material
H2263CH-L H2263CH-L
left hand left hand
die cast zinc die cast zinc
H2263CH-R H2263CH-R
right hand right hand
die cast zinc die cast zinc
Part No. No. Part
finish:chrome chrome plated plated I finish: steel, nickel nickel plated I steel, plated pin pin
M10 THD. M1OTHD. .55 14.0 .55[14.0] .60 [15.2] 15.2 .60
t
.95 24.2
.71 18.0 M8 x .590 [15.00] DEEP M8 (2) PLACES
2 10.7
1.65 42.0 1.65[42.0] CENT.
.71 18.0
.42 10.7
2.36 [60.0] 60.0 2.36 END VIEW
LEFT HAND Request Info
RIGHT HT HAND
1-800-453-1692 www.aboveboardelectronics.com
BOTTOM VIEW
END VIEW
LEFT HAND
RIGHT HAND
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
243 243
Hinges
'CIFIC dr
ENGINEERING AND PRODUCTS
Hinge Hinge Block Block Part Part No. No. i
1.18 30.0 CENT.
C
.77 19.5
M8 xx .492 MB .492 [12.5] [12.5] DEEP DEEP (2) PLACES PLACES
H2261CH H2261CH
M10 SCREW
.70 17.8 .35 [9.0] 9.0 .35
Material Material
Finish Finish
die zinc die cast cast zinc
chrome chrome plated plated
steel, nickel nickel plated pin I steel, plated pin
.83 21.0 1.24 31.5 1.24[31.5]
1.75 44.5
.77 19.5
.55 [14.0] 14.0 .55
Hinge Hinge Block Block .51 [13.0] 13.0 .51
.51 [13.0] 13.0 .51
4-1
Part No.
H2264 H2264 1.77 [45.0] 45.0 1.54 1.54 [39.0] 39.0 1.77
1.18 [30.0] 30.0 1.18
Finish Finish
steel steel
zinc plated zinc plated
.83 [21.0] 21.0 .83
.30 [7.5] 7.5 .30
23.0 .91 [23.0] .91 M6 THREAD THREAD M6 (3) PLCS. PLCS. (3)
1.11 [28.2] 28.2 1.11
Material
.47 [12.0] 12.0 .47
1.58 [40.2] 40.2 1.58
Hinge Hinge Block Block 4111) 33.4 1.32 [33.4] 1.32
Part No.
.40 10.2
H2265BK H2265BK
Material = rr
Finish Finish
die zinc die cast cast zinc
.83 [21.0] 21.0 .83 1.30 33.0 1.30 [33.0]
M4 THREAD (2) PLCS. PLCS. (2) M8 THREAD THREAD M8
black black powder powder coated coated
180° rotation rotation I 180° steel, nickel nickel plated pin I steel, plated pin
.37 9.5
23.44] .92 [2a .65 16.5
Die Die Cast Cast Zinc Zinc Strap Strap Hinge Hinge ID 411,
5.00 .197 [5.00] 0.197 THRU HOLE (3) PLCS.
7.
Part Part No. No.
H2249BK H2249BK
.402[10.20] C'BORE 10.20 CEIORE 0.402 .118 [3.00] p.00] DEEP (3) PLCS.
2.42 61.4 CENT.
Finish Finish
die zinc die cast cast zinc
black black powder powder coated coated
steel, nickel nickel plated pin I steel, plated pin
.55 14.0 .94[24.0] .94 24.0 .55[14.0] CENT. CENT. CENT. CENT.
3.23 82.0] 82.0 2.4C2E,?;4] 323
Material
1.18 30.0 1.18[304
2.03 [51.5] 51.5 2.03 45.0 1.77 [45.0]
ll 11.2 .44 [11 2]
.28 28 [77.0 0]
T
Die Die Cast Cast Zinc Zinc Strap Strap Hinge Hinge Part Part No. No.
.346 [8.80] 8.80 HOLE HOLE 0.346 .740 [18.80] xx 82 821 C'SINK 0.740
H2258BK H2258BK
(4) PLACES
Material Material
Finish Finish
die zinc die cast cast zinc
matte black matte black
stainlesssteel steelpin pin with with passivated passivated finish finish I stainless 4.33 3 110.0 10.0] 5.12 130.0 5.12[ 30.0] 4.3 CENT. ;w c
40.2 1.58 [40. CENT.
1.97 [50.1] 50.1 1.97
60.0 22.36 36[60 0]
2.17 [55.0] 55.0 2.17
135.0 5.31 [135.0] 120.0 4.72 [120.0] .69 [17.5] 17.5 .69 .236 [6.00] 6.00 STUDS 0.236
(2) PLACES
244 244
Download 31)moDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Material Material
Finish Finish
H2248BK H2248BK
die cast zinc die cast zinc
black black powder powder coated coated
1.44 36.5 1.44[36.5] .89 22.5 .89[22.5] .20 5.0 .20[5.0] .28 7.0 .28[7.0]
steel, nickel nickel plated I steel, plated pin pin M4 THREAD M4 xx 0.5 0.5 THREAD .256 [6.50] [6.50] DEEP .256 DEEP (2) (2) PLACES PLACES
t
.165 4.20 HOLE HOLEWITH WITH 0.165[4.20] .374[9.50] [9.50] x x 90 C'SINK 0.374 90' CSINK (2) (2) PLACES PLACES
.69 17.5 '69[17'5] 1 1.16 29.5 16[' 29 5] CENT. CENT.
1.57 40.0 CENT.
1.97 50.0] 50.0 1.5 1.97 c7E: T.°1
.30 7.5 .30[7.5]
.53 13.5 .53[13.5]
Cast Right Threaded Studs Studs Cast Right Hand Hand Lift-off Lift-off Hinge Hinge with with Threaded Part Part Number Number
H2070RH H2070RH
Material Material
Finish Finish
a
black powder die die cast castzinc zinc black powder coated coated
1.97 [50.0] 50.0 1.97
A
1.14 [29.0] 29.0 1.14
.236[6.00] 6.00 PIN PIN 0236
.33 8.5
brass bushing bushing I brass steel, nickel nickel plated I steel, plated pin pin
.41 10.5 TYP.
A .98 [25.0] 25.0 .98 CENT.
/ 1.61 [41.0] 41.0 1.61
M10 M10 xx 11 THD. (2) (2) PLACES PLACES
1
1.04 26.5 1.04[26.5]
.63 16.0 .83[16.0]
.14 [3.5] 3.5 .14
.89[22.5] 22.5 -.1 .89
C'SUNK HOLE HOLE CSUNK F.H.S. FOR 546 M6 F.H.S. (2) (2) PLACES PLACES
1.38 35.0 1.38[35.0]
FRONT VIEW FR N'MPII
SECTION A-A SECTION A-A
Cast Left Threaded Studs Studs Cast Left Hand Hand Lift-off Lift-off Hinge Hinge with with Threaded Part Part Number Number
H2070LH H2070LH
Material Material
Finish Finish
1.97 [50.0] 50.0 1.97
A-41-1 A
1.14 29.0
black powder die die cast castzinc zinc black powder coated coated
rZ]'
brass bushing bushing I brass steel, nickel nickel plated I steel, plated pin pin
.41 [10.5] 10.5 .41 TYP. 41.0 1.61 [41.0]
44M4 . .63 16.0 .83[18.0]
1.04 26.5 1.04[28.5]
lielealoallellearareari A A -41-I .98 25.0 .98 [25.0] F._ CENT.
M10 MlOxx 1I THD. MD. (2) PLACES
C'SUNK HOLE HOLE CSUNK FOR M6 F.H.S. FOR M6 F.H.S. (2) PLACES
.89 22.5 .89[22.5] 1.38 [35.0] 35.0 1.38 SECTION A-A SECTKIN A-A
EW FR GI
Material Material
Door Door
.14 3.5 .14[3.5]
f Mr/ /42
FRONT VIEW FRONT VIEW
Part No. No. Part
.236 6.00 PIN PIN 0.238[8.00]
.33 8.5 .33[8.5]
T
Cast Take-apart Enclosure Hinges Cast Take-apart Enclosure Hinges
Dim. A Dim. A
H2089 H2089
die 1.5-2mm thick thick die cast castzinc zinc 1.5-2mm
5mm 5mm
H2089-01 H2089-01
die 2.5-3.2mm thick die cast castzinc zinc 2.5-3.2mm thick
6mm 6mm
finish:black blackpowder powdercoated coated leaves leaves I finish: steel, zinc zinc plated plated pin I steel, pin 1.97 50.0
21.0
.83 21.0 .83[21.0]
A
.244 6.20
.244 6.20
.130 3.30 .130[3.30]
.236 6.00
li
DIM DIM A A
1.28 32.5] 32.5 1.28 .79 [20.0] 20.0 .79
.55 14.0 .55[14.0] i
.134 3.40
A /1-.01-1
DIM A
.16 4.0 .18[4.0]
20.5
ON A-A
.157 4.00 0.157[4 00] STEEL PIN
Hinges
Die Cast Cast Zinc Die Zinc Strap Strap Hinge Hinge Part No. Part No.
1.54 39.0 1.54[39.0]
AL
11:11 1: l 14 8\l ,i
1 .‘tiL r
Fr A ,0 .134 3.40
.260 6.60 HOLE HOLEWITH WITH 0.280[8.80] .496112.801x [12.60] x 90 C'SINK 0.498 90' CSINK
DIM A
.7 .81i 20.5 . 5: EXPLODED VIEW EXPLODED 1/IEW
Request Info
SECTION A-A SECTION A-A
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
245 245
Hinges
I L. •
"""IFIC ENGINEERING AND PRODUCTS
Enclosure Enclosure Hinge Hinge Part No. Part No. 1.18 30.0
1.18 30.0 -1.0[30.0]
Finish Finish
Door Door
die zinc die cast cast zinc
smooth black black smooth powder powder coated coated
1.5-2mm 1.5-2mm thick thick
FRAME LEAF
componentscan can be be purchased purchased separately separately I components
.73 18.5
r
H3537 H3537
Material alaIM
FRAME LEAF
.236 6.00 0.838[100]
TOP VIEW
1.18 30.0 .50 12.7 50[!2.7]
.47 11.9
A
1.46 10.11 DEEP M6 x .39[10.0] DEEP71.112. THD.
A
.08 2.0 TYP.
.236 6.00
.079 2.00 .079[2.00]
A B
.47 11.9 DOOR LEAF
.236 6.00
A
M6 x .39[10.0] DEEP THD.
DOOR
.50 12.7 PIN 1.03 26.1
.079 2.00
.63 16.1
.47 11.9
LEFT SIDE VIEW
PIN DOOR LEAF
FRONT VIEW
SECTION A-A
EXPLODED VIEW
Cast Take-apart Cast Take-apart Enclosure Enclosure Hinges Hinges Part Part Number Number 1.50 38.0
1.50 38.0
.244 6.20 HOLE HOLE AND AND 0.244[6.20] C'SUNK FOR FOR AN AN M6 M6 F.H.S. F.H.S. CSUNK
.98 25.0 TOP VIEW VIEW TOP
1.07 27.1
die zinc die cast cast zinc
2mm thick 2mm thick
5.1mm 5.1mm
H2071-01* H2071-01*
die zinc die cast cast zinc
3mm thick 3mm thick
6.1mm 6.1mm
A 1.07 27.1
.79 20.0
.08 2.0 TYP.
A
.08 2.0 TYP.
.79 20.0
1.18 30.0 1.65 42.0
FRONT VIEW VIEW FRONT
A
DOOR
A
.79 20.0
.79 20.0 .24 6.0
1.65 [42.0] 42.0 1.65
H2071 H2071
A
A
A
.24 [6.0] 6.0 .24
Dim. A Dim. A
black powder powder coated coated leaves leaves I black steel, nickel nickel plated pin I steel, plated pin * indicates indicates non-stock non-stock items I* items
.98 25.0
DOOR
.236 6.00
Door Door
.244 6.20 HOLE AND C'SUNK FOR AN M6 F.H.S.
TOP VIEW
A
.236 [6.00] 6.00 0.236
Material Material
1.18 30.0
SECTION A-A A-A SECTION FRONT VIEW
EXPLODED VIEW SECTION A-A
EXPLODED VIEW VIEW EXPLODED
Cast Take-apart Cast Take-apart Enclosure Enclosure Hinges Hinges Part Part Number Number 1.18 30.0 -11.18[30.o]
.73 [18.5 18.5 .73
TOP VIEW TOP VIEW
Material Material
A
.08 2.0 TYP.
.73 18.5
A
1.03 [26.1] 26.1 1.03
B
.236 6.00
H2074 H2074
die 15mm diecast castzinc zinc 1.5mm 1.5mmthick thick 4.6mm 4.6mm 15mm die zinc 2mm thick 5.1mm 15mm 15mm diecast cast zinc 2mm thick 5.1mm
H2074-02* H2074-02*
die 17mm diecast castzinc zinc 1.5mm 1.5mmthick thick 4.6mm 4.6mm 17mm
H2074-03* H2074-03*
die zinc 2mm thick 5.1mm 17mm 17mm diecast cast zinc 2mm thick 5.1mm
.63 [16.1] 16.1 .63
.47 [11.9] 11.9 .47
LEFT VIEW LEFT SIDE SIDE VIEW
H2074-04* H2074-04*
die 19mm diecast castzinc zinc 1.5mm 1.5mmthick thick 4.6mm 4.6mm 19mm
H2074-05* H2074-05*
die zinc 2mm thick 5.1mm 19mm 19mm diecast cast zinc 2mm thick 5.1mm
black powder powder coated coated leaves leaves I black steel, nickel nickel plated pin I steel, plated pin EXPLODED * indicates indicates non-stock items I* non-stock items VIEW
TOP VIEW
A A
DOOR
Dim. Dim. B B Dim.AA Dim.
H2074-01* H2074-01*
1.18 30.0 A
Door Door
A
FRONT VIEW FRONT VIEW
.08 2.0 SECTION TYP. A-A
A
A
1.03 26.1
B
.236 6.00
A
DOOR
.63 16.1
.47 11.9
LEFT SIDE VIEW
FRONT VIEW
SECTION A-A
EXPLODED VIEW EXPLODED VIEW
Cast Take-apart Cast Take-apart Enclosure Enclosure Hinge Hinge 1.02 [26.0] 26.0 1.02
1
Part Part Number Number
1.02 26.0
H2077 H2077
Material
Finish Finish
die zinc die cast cast zinc
black black powder powder coated coated
steel, nickel nickel plated I steel, plated pins pins Ø.205 [5.21] [5.21] HOLE 0.205 HOLEWITH MTH A A MINK C'SINK FORAN ANM5 M5 F.H.S. F.H.S. .63 FOR 16.0
.63 [16.0] 16.0 .63 TOP VIEW VIEW TOP .20 [5.0] 5.0 .20
.20 5.0
A
.20 [5.0] 5.0 .20 .75 19.0 75 [19.0]
.08 2.0 reP. TYP. .08[2.0] LEFT SIDE SIDE VIEW VIEW LEFT
246 246
Download 31:Immo @ Download @www.spep.com www.spep.com
TOP VIEW
.08 [2.0] 2.0 TYP. TYP. .08 .236 6.00
.236 [6.00] 6.00 0.236 A PIN
.20 5.0 .75 19.0
A.08 2.0 TYP. A 2.64 [67.0] 67.0 2.64 FRONT VIEW LEFT SIDEFRONT VIEW VIEW
Ø.205 [5.21] HOLE WITH A C'SINK FOR AN M5 F.H.S.
.25 6.3 25 [6.3]
A
• =V<.1'
.08 2.0 TYP.
PIN
12.0 .25 6.3 eira4 ..4747[12.0]
.28 [7.0] 7.0 .28 2.64 67.0 SECTION AA A-A SECTION FRONT VIEW
.47 12.0
.28 7.0 SECTION A-A
EXPLODED VIEW
EXPLODED VIEW VIEW EXPLODED
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part No.
H2075 H2075
Material
Finish Finish
die cast zinc die cast zinc
black powder black powder coated coated 1.11 28.2
steel, zinc zinc plated plated pins pins I steel,
.70 17.8
Hinges
Cast Take-apart Enclosure Hinge Cast Take-apart Enclosure Hinge 2.36 60.0 2.30[60.01
2.95 75.0 2.95[75.0]
VIEW TOP _/1EVI .31 7.9
.10 2.5 TYP.
.31 7.9
.10 [2.51 2.5 TYP.
A .31 7.9
.31 7.9 1.40 35.6 .75 19.1 .50 12.8 .50112.0
.50 12.8
A
.09 2.2 TYP. .93 23.5
.98 25.0
.98 25.0
EXPLODED VIEW VIEW EXPLODED
SECTION A-A
.09 2.2 TYP.
M5 THD. WITH .39 [9.9] THD. DEPTH (3) PLACES
.93 93 23.5
Inc EXPLODED VIEW
SECTION A-A SECTION A-A
FRONT VIEW FRONT VIEW
Take-apart Enclosure Enclosure Hinge Take-apart Hinge Part Number
H2086
Base Base
Weld-on Leaf Weld-on Leaf
Material Finish Finish Material Material Finish Finish Material die cast die cast
sand sand blasted blasted
M6 THD. HOLE H2086 .39 [10.0] MIN THD. DEPTH zinc zinc (3) PLCS.
zinc zinc plated plated
steel steel
1.32 33.6 1.32[33.0
.10 2.5 .10 [2.5]-.1 b
steel, zinc zinc plated I steel, plated pin pin
M6 THD. HOLE M8 [10.0] MIN .39 [10.01 MIN THD. DEPTH (3) PLCS.
.276 [7.00] 7.00 .278 PIN 46.3 1.82 48.3]
.81 20.5
0:1150ab
1.01
.81 20.5 .81[20.0
25.8 .8] .49 12.4 .49[12.4]
r 23.5 .93 [23.5]
1.97 50.0 1.97[50.0] CENT.
EXPLODED VIEW EXPLODED VIEW
EXPLODED VIEW
2.95 75.0 2.95[T5.0]
EnclosureHinge Hinge C) Enclosure Part Number. Part Number.
Material Material
Finish Finish
steel steel
zinc plated zinc plated
H2267 H2267
.98 25.0 CENT.
C'SUNK FOR AN M6 F.H.S. (2) PLCS.
.50 12.8
steelclips clips and and pins I steel pins
OR AN
BOX LEAF
CLIP
.50 12.8
BOX LEAF LEAF BOX
M6 THD. HOLE .39 [10.0] MIN THD. DEPTH (3) PLCS.
DOOR LEAF
.315 8.00 (2) HOLES
.73 18.5 CENT.
PINS RETRACT TO RELEASE DOOR LEAF
1.61 41.0 .90 22.8
TOP.,11E1.111 VIEW
.50 12.8 .50 12.8
.39 10.0 REF. DMREF. TYP.
CLIP
111
1:311
DOOR LEAF LEAF DOOR
00 S
PINS RETRACT PINS RETRACT TO RELEASE TO RELEASE DOOR LEAF DOOR LEAF
.118 3.00 THK. 3.54 90.0 3.54[90.0]
EXPLODED VIEW VIEW EXPLODED
.78 19.8
.63 16.0
FRONT VIEW FRON1vIEW
.90 22.8
J2188 J2188
PIN
J2188SS J218855
steel steel
304SS 304SS
.118 3.00 includes:box boxleaf, leaf,lid lidleaf, leaf, pin, pin, I THK. includes: .78 19.8
SIDE $11EW 11:: VIEW
Heavy Duty Duty Hinges Hinges with with Quick Quick Release Release Pin Heavy Pin
EW PP, DIJ T
AMILY
Finish Finish
90.0 3.54 [904 3.54 1.99 [sok] 50.6 1.99
zinc plated zinc plated
.93 23.5
Part Number Part .236 Number 6.00
.118 3.00 Material THK.
passivated passivated
.118 3.00 THK.
.236 6.00 PIN
.93 23.5
.81 20.5
.98 [25.0] 25.0 .98
.118 3.00 .118[3.00]
CENT.
.248 [630] 6.30 xx.958 .358 [9.10] [9.10] 0.248 (2) OBROUNDS
L
capture capture ring ring .098 2.50
.63 16.0
1.08 [27.5] 27.5 1.08
SIDE VIEW .256 6.50 HOLE HOLE 0.256[6.50] FOR OR M6 F.H.S. (2) PLCS.
.236 6.00 .236 [6.00] -.-
Enclosure Hinge Kits with with Cast Cast Box Box Leaves Leaves Enclosure Hinge Kits
EW RTD T.T
ARIDLY
Part Number Part Number
J2130 J2130 J2130SS J213055
Box Leaf Box Leaf Material Material
.91 23.0
Finish I Finish
die cast cast zinc die zinc
clear zinc clear zinc
3.15 80.0 3.15[80.0]
304SS 304SS
passivated passivated
1.18 30.0 1.18[30.0] CENT.
includes:box boxleaf, leaf,lid lidleaf, leaf, pin, pin, c-clip, c-clip, (2) (2) 1/4-20 I includes: 1/4-20 screws, (2) screws, (2) sealing sealing washers, washers,(2) (2)1/4-20 1/4-20nylon nylon nuts nuts
mr
HEX WITH .45 11.5 HEX .45[11.5] MTH C'BORE .08[2.0] DEEP CTIORE (2) PLCS.
.93 23.7
1.12 28.5
N EtrZ f 01 1 i .20 5.0
.16 4.0 0.18[4.0] _0.1 (2) WELD GUIDES
.59 15.0
.79 20.0 .79[20.0] TOP VIEW TOP VIEW
RIGHT SIDE VIEW
0 0
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
247 247
SIER" ja MNICIFIC ENGINEERING AND PRODUCTS
Hinges
Hinges 0 Lift-off Lift-off Hinges w Steel Flag Steel Flag Joint Joint Hinges Hinges at Material..Open g1111. Left M51/11 Left Hand Hand Length Length C Width Thickness Width Thickness Part Part No. No. E 2.00 1.25 2.00 .048 FJ41220L FJ41220L •
Loose Joint Steel Loose Joint Hinges Hinges Steel r
Right ht Hand Hand Part Part No. No.
Pin Pin i Dia. Dia. .125 .125
FJ41220R FJ41220R • FJ41520R FJ41520R
FJ41520L FJ41520L
.048
.125 2.00 .125 1.50 1.50 2.00
FJ41525L • FJ41525L
.048
1.50
2.50
.125 .125
FJ41525R • FJ41525R
FJ42030L FJ42030L
.048
2.00 2.00
.125 3.00 3.00 .125
FJ42030R FJ4203OR •
FJ61015L • FJ61015L
.060
1.00
1.50 1.50
.125 .125
FJ61015R • FJ61015R
FJ61220L FJ61220L
.060
.125 2.00 .125 1.25 2.00 1.25
FJ61220R FJ61220R
FJ61520L FJ61520L
.060
.125 2.00 .125 1.50 1.50 2.00
FJ61520R FJ61520R
FJ62020L • FJ62020L
.060 .060
2.00 2.00
2.00 2.00
.125 .125
FJ62020R • FJ62020R
FJ62025L • FJ62025L
.060
2.00 2.00
2.50
.125 .125
FJ62025R • FJ62025R
FJ62030L FJ62030L
.060 .060
.125 3.00 .125 2.00 2.00 3.00
FJ71520L • FJ71520L
.075
1.50 150
.125 .125
FJ72025L FJ72025L
.075 .075
.125 2.50 .125 2.00 2.50 2.00
.075
.187 .187
FJ72030L FJ72030L k
2.00 2.00
2.00 2.00
3.00 3.00
Open Open Width Width
Length Length
Pin Pin Dia. Dia.
U41015L • LJ41015L
.048 .048
1.00
1.50 1.50
.125
U41015R • LJ41015R
U41215L • LJ41215L
.048 .048
1.25
1.50 1.50
.125
U41215R • LJ41215R
U41520L • LJ41520L
.048 .048
1.50
2.00 2.00
.125
U4152OR • LJ41520R
U41525L • LJ41525L
.048 .048
1.50
2.50 2.50
.125
U41525R • LJ41525R
.250 .250
U42025R • • * LJ42025R
U42025L • • LJ42025L
.051 .051
2.00 2.00
2.50 2.50
LJ61220L LJ61220L
.060 .060
1.25
2.00 2.00
.125
U61220R* LJ61220R
LJ61520L U61520L •
.060 .060
1.50
2.00 2.00
.125
LJ61520R U6152OR •
LJ61525L U615251_
.060 .060
1.50
2.50 2.50
.125 .125
LJ61525R U61525R
U62030L • LJ62030L
.060 .060
2.00 2.00
3.00 3.00
.125
LJ62030R U6203OR •
LJ63040L U63040L •
.060 .060
3.00
4.00 4.00
.125
LJ63040R U6304OR •
FJ62030R FJ62030R
LJ62021L LJ62021L
.060 .060
2.00
2.00 2.00
.187
LJ62021R U62021R
FJ71520R • FJ71520R
U71520L • LJ71520L
.074
1.50
2.00 2.00
.187
LJ71520R U7152OR •
FJ72025R FJ72025R
LJ71825L LJ71825L
.074
1.88
2.50 2.50
.187
LJ71825R U71825R •
FJ72030R FJ72030R
U72030L • LJ72030L
.074
2.00
3.00 3.00
.187
LJ72030R U7203OR •
.187
LJ73040R U7304OR •
FJ73040L • * FJ73040L
.075
3.00 3.00
.187 4.00 .187 4.00
FJ73040R • FJ73040R
LJ73040L U73040L •
.074
3.00
4.00 4.00
FJ92025L • FJ92025L
.090
2.00 2.00
2.50
.187 .187
FJ92025R • FJ92025R
LJ81720L U81720L
.080 .080
1.68
2.00 2.00
.187
U81720R LJ81720R
FJ92030R FJ9203OR •
U81720L02 • LJ81720L02
.080 .080
1.68
2.00 2.00
.187
U81720R02 • LJ81720R02
LJ81720L03 LJ81720L03
.080 .080
1.68
2.00 2.00
.187
LJ81720R03 U81720R03
LJ81520L U81520L
.080 .080
1.50
2.00 2.00
.250 .250
LJ81520R U81520R
LJ91520L U91520L •
.090 .090
1.50
2.00 2.00
.187
LJ91520R U9152OR •
U91525L • LJ91525L
.090 .090
1.50
2.50 2.50
.187
LJ91525R U91525R •
LJ92025L U92025L •
.090 .090
2.00
2.50 2.50
.187
LJ92025R U92025R •
LJ92030L U92030L •
.090 .090
2.00 2.00
3.00 3.00
.250 LJ92030R .250 U9203OR •
LJ92525L U92525L •
.090 .090
2.50 2.50
2.50 2.50
.187
LJ92525R U92525R •
.250 .250
LJ93030R U9303OR • * LJ94040R U9404OR •
.187 .187
3.00 3.00
FJ92030L FJ92030L •
.090
FJ93030L FJ93030L
.090
.250 3.00 .250 3.00 3.00 3.00
FJ93030R FJ93030R
FJ93040L FJ93040L
.090
.250 4.00 .250 3.00 4.00 3.00
FJ93040R FJ93040R
FJ123040L FJ123040L •
.120
3.00 3.00
4.00 4.00
.250 .250
FJ123040R FJ12304OR •
FJ124040L • FJ124040L
.120
4.00
4.00
.250 .250
FJ12404OR • FJ124040R
2.00 2.00
female
female
LJ93030L U93030L •
.090 .090
3.00
3.00 3.00
LJ94040L U94040L •
.090 .090
4.00
4.00 4.00
.250 .250
LJ123040L LJ123040L
.120
3.00 3.00
4.00
.250 LJ123040R .250 U12304OR
LJ124040L LJ124040L
.120
4.00
4.00 4.00
.250 .250
U124040R LJ124040R
U125050L • LJ125050L
.120
5.00
5.00 5.00
.250 .250
LJ125050R U12505OR •
U126060L • LJ126060L
.120 .120
6.00
6.00 6.00
.250 LJ126060R 250 U12606OR •
LJ183040L LJ183040L
.180 .180
3.00 3.00
4.00
.375 375
LJ183040R U18304OR
LJ184050L U184050L •
.180 .180
4.00
5.00 5.00
.375 375
LJ184050R U18405OR •
LJ186060L U186060L •
.180 .180
6.00
6.00 6.00
.375 375
LJ186060R U18606OR •
indicates stock items • indicates items saver = money saver
(2) Ø.130 have (2) these hinges 0.130 holes holes hinges have • these (2) Ø.187 have (2) hinges have • these 0.187 holes holes these hinges (2) Ø.208 have (2) hinges have these hinges these 0.208 holes holes male
Loose Joint Series Loose 300 Joint Hinges Hinges 300 Series
male
Flag Flag Joint Joint Hinge Hinge right hand
Loose Loose Joint Joint Hinge Hinge left left hand hand
joint flag joint than flag popular than I loose more popular are more hinges are joint hinges loosejoint likely to hinges, thus thus more to be be stock stock items items more likely hinges, flag joint than flag less than cost less hinges cost I loose joint hinges hinges joint hinges loosejoint
248 248
Right Right Hand Hand Part Part No. No.
Material Material Thickness Thickness
Left Left Hand Hand Part Part No. No.
Request Info
Download 3Dmoons @ www.spep.com @ www.spep.com Download
1-800-453-1692 www.aboveboardelectronics.com
Right Right Hand Hand Part Part No. No. d
Material Material Thickness Thickness
Open Open Width Width
Length Length
Pin Pin Dia. Dia.
LJ41015L5 • LJ41015LS
.048
1.00
1.50
.125
LJ41015RS U41015R5 •
U42025L5 • • LJ42025LS
.051
2.00
2.50
.250
LJ42025RS U42025R5 • milk
LJ61220LS LJ61220L5
.060
1.25
2.00
.125
U61220115* LJ61220RS
LJ61520RS U61520R5 • ilk
Left Left Hand Hand Part Part No. No.
i
LJ61520LS U61520L5 •
.060
1.50
2.00
.125
LJ71520LS LJ71520L5
.074
1.50
2.00
.187
U71520R5 LJ71520RS
LJ81720LS LJ81720L5 *
.080 .080
1.68
2.00
.187
LJ81720RS U81720R5 '
LJ81720L502 •* LJ81720LS02
.080 .080
1.68
2.00
.187
LJ81720RS02 U8172011502 •
LJ81720LS03 LJ81720L503 x*
.080
1.68
2.00
.187
LJ81720RS03 U81720R503
LJ92025LS U92025L5 •
.090
2.00
2.50
.187
LJ92025RS U92025R5 •
LJ93030LS L.193030L5 • *
.090
3.00
3.00 3.00
.250 LJ93030RS U93030R5 • *
LJ123040LS U123040L5 •
.120
3.00
4.00
.250
LJ123040RS U123040115 •
U124040L5 • LJ124040LS
.120
4.00
4.00
.250
LJ124040RS U124040R5 •
LJ184050LS LJ184050L5
.187
4.00 4.00
5.00
.375 375
LJ184050RS U18405ORS
Hinges and Industrial Hardware
Material Material
Finish Finish
H1039 H1039
Part Number Part Number
.120 [3.05] .120 [3.05] steel steel
mill mill
H1039ZN H1039ZN
.120 [3.05] zinc plated plated .120 [3.05]steel steel zinc
H1039SS H103955
304SS 304SS
SPOT WELD (2) PLCS.
4.00 101.6
passivated passivated
Hinges
Double Wrap Flag Double Wrap Flag Joint Joint Hinges Hinges
2.00 50.8
.512 13.00
Part Part Number Number
Material Material
Finish Finish
FJ71130L01 FJ71130L01
.079 [20.07] [20.07] .079 304SS 304SS
tumbled tumbled
•
1.25 31.8
Stainless Steel Flag Flag Joint Joint Hinge Stainless Steel Hinge
1 1 1.19 30.2 1.19[30.2]
1.47 37.3 1A,[3].3]
pin: 0.250 Ø.250 [6.35] [6.35] cold I pin: cold headed headed pin pin bothleaves leaves half half swaged I both swaged washer welded welded to to knuckle knuckle I washer
1.19 30.2 1.19[30.2 h-
WASHER WASHER
2]
3.00 76.2 3 Oo[n
1.47 37.3 1.47[3].3
Stainless Steel Flag Flag Joint Joint Hinge Stainless Steel Hinge Part Part Number Number
FJ61720SS FJ6172055
Material Material
Finish Finish
.079 [20.07] [20.07] .079 304SS 304SS
tumbled tumbled
.90 22.7 .90[22.7]
1.00 25.4 1.00[25.4]
pin: 0.181 Ø.181 [4.60] [4.60] cold I pin: cold headed headed pin pin bothleaves leaves half half swaged I both swaged includesstainless stainless steel steel and and nylon nylon washer washer for for I includes needed application needed application
.90 22.7 .90[22]]
WASHER WASHER 2.09 53.0 2 09 53 01 1.00 25.4 1.00T5.4]
Part Part Number Number
Leaf Side Leaf Side
Hole Size Size Hole
Pin Length Pin Length
BH8150 BH8150
LH LHmale male
.161 [4.09] [4.09] .161
.500 [12.70] [12.70] .500
BH8150NH BH8150NH
LHmale male LH
no no holes holes
.500 [12.70] [12.70] .500
BH8152 BH8152
LH LHmale male
.161 [4.09] [4.09] .161
.625 [15.88] [15.88] .625
LH LHmale male
no no holes holes
.625 [15.88] [15.88] .625
LHfemale female LH
.161 [4.09] [4.09] .161
n/a n/a
BH8152NH BH8152NH BH8154 BH8154 BH8154NH BH8154NH
LH LHfemale female
no no holes holes
n/a n/a
BH8160 BH8160
RH female female RH
.161 [4.09] [4.09] .161
n/a n/a
BH8160NH BH8160NH
RH RH female female
no no holes holes
n/a n/a
BH8162 BH8162
RH male RH male
.161 [4.09] [4.09] .161
.500 [12.70] [12.70] .500
BH8162NH _ BH8162NH
RH male RH male
no no holes holes
.500 [12.70] [12.70] .500
BH8164 • BH8164
RH male RH male
.161 [4.09] [4.09] .161
.625 [15.88] [15.88] .625
BH8164NH • BH8164NH
RH male RH male
no no holes holes
.625 [15.88] [15.88] .625
Gauge Gauge
.050 .050 [1.27] [1.27]
Leaf Leaf Width Width
.719 .719 [18.26] [18.26]
Length
1.500 1.500 [38.10] [38.10]
•
Cold Rolled Cold Rolled Steel Steel Loose Loose Joint Joint Hinges Hinges
Pin Dia.
.120 .120 [3.05] [3.05] leaf leaf width width
-41(-
leaf leaf width width
length length
all part partnumbers numbersare aremill millfinish finish(call (callfor forfinish finish availability) availability) I all short pin pin A short long pin pin • long LH LHmale male leaf leaf
Request Info
1-800-453-1692 www.aboveboardelectronics.com
LH LHfemale female leaf leaf
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
249 249
Hinges
..." M"
NIIM "W".6 --TERING AND PRODUCTS
Brass Take-apart Hinge Brass Take-apart Hinge CD Part Part No. No.
C
1.97 50.0
Finish Finish
brass brass
nickel plated nickel plated
1.97 [50.0] 50.0 1.97 .059 1.50 THK. .64 16.2 .64[16.2]
.44 11.2
1.50 .059 [1.50] THK.
e
rc) O
J
.44 11.2
APPROX. APPROX 40°
.39 10.0
79 20.0
Material Material
H2242N H2242N
.118 3.00 PIN
REMOVING DOOR REMOVING DOOR
.150 3.80 HOLES
.79 20.0
.39 10.0
15.0 .59 [15.0] ANGLE FOR ANGLEQL1
20.0 .79 [20.01
.260 [6.50] x 90° C'SINK (6) PLCS.
20.0 .79 [20.0]
APPROX. 40°
.118 [3.00] 3.00 0.118 PIN
ANGLE FOR REMOVING DOOR
.150 [3.80] 3.80 HOLES HOLES 0.150 .260 [6.50] [6.50] xx 90° 90° C'SINK 0.260 CSINK (6) PLCS. (3) PLCS-
Brass Take-apart Brass Take-apart Hinge Hinge Part Part No. No.
Material Material
Finish Finish
brass brass
nickel plated nickel plated
H2243N H2243N .059 1.50 THK.
1.42 36.0
.059 1.50 .059E1.301 THK. MK.
1.42 36.0 142[38.0]
.62E15*
E131
.62 15.9
.37 9.4
e .37 9.4 1.4]
APPROX. 40°
.118 3.00 PIN
.33 8.5
ANGLE FOR
REMOVING DOOR REMOVING DOOR
APPROX. 40°
.33 8.5 .59 15.0 .59[15.0]
.126 3.20 HOLES (6) PLCS.
13.0
.118 3.00 0.115[3.00] PIN
ANGLE FOR REMOVING DOOR
.126 3.20 HOLES HOLES 0.126[3.20] (6) PLCS. (3)
.51 13.0
.51 13.0 .51[13D]
.51 13.0 .51[13D]
Brass Take-apart Brass Take-apart Hinge Hinge Part Part No. No.
Material Material
Finish Finish
brass brass
nickel plated nickel plated
H2244N H2244N .039 1.00 THK.
1.42 36.0
.039 [1.00] h.039 1.00 THK.
36.0 1.42 [36.0]
G
16.5 .65 [16.51
e
.40 10.2
.40 10.22] 40 [10
1=
APPROX. 40° APPROX
.079 2.00 PIN
.38 9.7
ANGLE FOR ANGLE FOR REMOVING DOOR REMOVING DOOR
.138 3.50 HOLES (6) PLCS.
.53 13.5
APPROX. 40°
.38 9.7 .38 [9. -7] .63 16.0 .63[16.0]
e
.53 [13.5] 13.5 .53
.53 13.5 ....._ .53[13.5]
.079 2.00 0.079 [2.00] 1 PIN
ANGLE FOR REMOVING DOOR
.138 [3.50] 3.50 HOLES HOLES 0 .138 (6) PLCS.
Brass Take-apart Brass Take-apart Hinge Hinge Part Part No. No. Mr
.11
.039 1.00 THK.
.60 [15.2] 15.2 .60
nickel plated nickel plated
O .38 [9.7] 9.7 .38
APPROX. 40° APPROX. 40°
250 250
brass brass .039 [1.00] 1.00 .039 THK. THK.
1.18 [30.0] 30.0 1.18
.38 9.7
.79 20.0 CENT.
Finish Finish
H2245N H2245N
1.18 30.0
.32 8.3
Material =al
.118 3.00 PIN
.150 3.80 HOLES .221 [5.60] x 90° C'SINK (4) PLCS.
ANGLE FOR ANGLE FOR REMOVING DOOR REMOVING DOOR
APPROX. 40°
.32 [8.3] 8.3 .32
.54 [13.8] 13.8 .54
.79 [20.0] 20.0 .79 CENT. CENT.
.118 3.00 PIN PIN
ANGLE FOR REMOVING DOOR
.150 3.80 HOLES HOLES 0.150[3.80] .221[5.60] [5.60] xx 90° 90° C'SINK C'SINK 0.221 (4) PLCS. PLCS. (4) Request Info
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial industrial Hardware Hardware Hinges and
Weld-on Hinges Weld-on Hinges
Brass Bushing Pin, Brass Steel Steel Pin, Bushing Fixed Steel Body, Fixed Steel Body, (L) Length Length (L)
(D) Dia .. (D) Body Body Dia
(H) Thickness Thickness (H)
Pin Dia. Pin Dia. (d) (d)
W100 W100
[40] 1.57 [40] 1.57
[8] .31 [8] .31
[9.6] .37 [9.6] .37
[5] .20 [5] .20
W110 W110
1.97 1.97 [50] [50]
.31 [8] .31 [8]
[9.6] .37 [9.6] .37
[5] .20 [5] .20
W120 W120
[60] 2.36 236 [60]
[10] .39 39 [10]
.47 [12] .47 [12]
.24 [6] .24 [6]
W130 W130
2.76 [70] [70] 2.76
[11.5] .45 [11.5] .45
[13.2] .52 .52 [13.2]
[6] .24 [6] .24
W140 W140
3.15 3.15 [80] [80]
[13] .51 51 [13]
.61 [15.4] .61 [15.4]
[8] .31 [8] .31
W160 W160
3.94 3.94 [100] [100]
.63 [16] .63 [16]
.77 [19.5] .77 [19.5]
[10] .39 [10] .39
W170 W170
4.72 [120] 4.72 [120]
[16] .63 [16] .63
[19.5] .77 .77 [19.5]
[10] .39 [10] .39
W180 W180
[135] 5.31 531 [135]
.71 [18] .71 [18]
[22.9] .90 [22.9] .90
[13] .50 [13] .50
W190 W190
5.91 5.91 [150] [150]
.79 [20] .79 [20]
.99 [25.2] .99 [25.2]
[13] .50 [13] .50
W200 W200
7.09 7.09 [180] [180]
.79 [20] .79 [20]
.99 [25.2] .99 [25.2]
[14] .55 [14] .55
Part Part Number Number
W210 W210
7.87 7.87 [200] [200]
[23] .91 [23] .91
1.11 [28.3] 1.11 [28.3]
[16] .63 [16] .63
W220 W220
10.24 [260] [260] 10.24
1.10 1.10 [28] [28]
1.46 1.46 [37] [37]
.75 [19] .75 [19]
Pin, Brass Brass Pin, Fixed Brass Steel Brass Bushing Bushing Body, Fixed Steel Body, (L) Length Length (L)
(D) Body Body Dia. Dia. (D)
(H) Thickness Thickness (H)
Pin Pin Dia. Dia. (d) (d)
W100-01 W100-01
1.57 1.57 [40] [40]
[8] .31 31 [8]
[9.6] .37 [9.6] .37
[5] .20 [5] .20
W110-01 W110-01
1.97 1.97 [50] [50]
[8] .31 31 [8]
[9.6] .37 [9.6] .37
[5] .20 [5] .20
W120-01 W120-01
[60] 2.36 2.36 [60]
[10] .39 [10] .39
.47 [12] .47 [12]
[6] .24 .24 [6]
W130-01 W130-01
2.76 [70] [70] 2.76
.45 .45 [11.5] [11.5]
.52 [13.2] .52 [13.2]
.24 [6] .24 [6]
W140-01 W140-01
3.15 3.15 [80] [80]
.51 [13] .51 [13]
[15.4] .61 [15.4] .61
[8] .31 [8] .31
W160-01 W160-01
3.94 [100] 3.94 [100]
[16] .63 [16] .63
.77 [19.5] .77 [19.5]
[10] .39 [10] .39
W170-01 W170-01
4.72 [120] [120] 4.72
.63 [16] .63 [16]
.77 [19.5] .77 [19.5]
.39 [10] .39 [10]
W180-01 W180-01
[135] 5.31 531 [135]
.71 [18] .71 [18]
.90 [22.9] .90 [22.9]
[13] .50 [13] .50
W190-01 W190-01
5.91 5.91 [150] [150]
[20] .79 [20] .79
.99 [25.2] .99 [25.2]
[13] .50 [13] .50
W200-01 W200-01
7.09 7.09 [180] [180]
.79 [20] .79 [20]
.99 [25.2] .99 [25.2]
.55 [14] .55 [14]
Part Part Number Number
W210-01 W210-01
7.87 7.87 [200] [200]
.91 [23] .91 [23]
1.11 [28.3] [28.3] 1.11
[16] .63 [16] .63
W220-01 W220-01
10.24 [260] [260] 10.24
1.10 1.10 [28] [28]
[37] 1.46 [37] 1.46
[19] .75 [19] .75
Hinges
I
ioiioiaoaaaaiiaaia welding details welding details
L
D
H d brass grease grease fittings fittings and and bushings bushings may may be be purchased purchased separately separately additional brass ►additional
imme = IN=
Grease Fitting with Grease Weld-on Hinges with Fitting Weld-on Hinges Pin,Brass Bushing, Steel Steel Pin,Brass Bushing, Grease Grease Fitting Fitting Fixed Steel Body, Fixed Steel Body, Pin Pin Dia. Dia. (d) (d)
(L) Length Length (L)
(D) Body Body Dia. Dia. (D)
(H) Thickness Thickness (H)
3.15 3.15 [80] [80]
.51 .51 [13] [13]
.61 [15.4] .61 [15.4]
[8] .31 [8] .31
W160-02 W160-02
3.94 3.94 [100] [100]
.63 [16] .63 [16]
.77 [19.5] .77 [19.5]
[10] .39 [10] .39
W170-02 W170-02
4.72 [120] [120] 4.72
.63 [16] .63 [16]
.77 [19.5] .77 [19.5]
[10] .39 [10] .39
W190-02 W190-02
5.91 5.91 [150] [150]
[20] .79 [20] .79
.99 [25.2] .99 [25.2]
[13] .50 [13] .50
W200-02 W200-02
7.09 7.09 [180] [180]
.79 [20] .79 [20]
.99 [25.2] .99 [25.2]
.55 [14] .55 [14]
W210-02 W210-02
7.87 7.87 [200] [200]
.91 [23] .91 [23]
1.11 [28.3] 1.11 [28.3]
[16] .63 [16] .63
W220-02 W220-02
10.24 [260] [260] 10.24
1.10 1.10 [28] [28]
[37] 1.46 [37] 1.46
[19] .75 [19] .75
Part Part Number Number
W140-02 W140-02
Steel Pin, Brass Brass Bushing, Bushing, Grease Grease Fitting Fitting Brass Pin, Fixed Brass Body, Fixed Steel Body, Part Part Number Number
(L) Length Length (L)
(D) Body Body Dia. Dia. (D)
(H) Thickness Thickness (H)
Pin Dia. Pin Dia. (d) (d)
W140-01GF W140-01GF
[80] 3.15 3.15 [80]
.51 [13] [13] .51
[15.4] .61 [15.4] .61
[8] .31 [8] .31
W160-01GF W160-01GF
3.94 [100] 3.94 [100]
.63 [16] .63 [16]
[19.5] .77 [19.5] .77
.39 39 [10] [10]
W170-01GF W170-01GF
[120] 4.72 4.72 [120]
[16] .63 [16] .63
.77 [19.5] .77 [19.5]
[10] .39 39 [10]
W190-01GF W190-01GF
[150] 5.91 5.91 [150]
[20] .79 [20] .79
[25.2] .99 [25.2] .99
.47 [12] .47 [12]
W200-01GF W200-01GF
7.09 [180] 7.09 [180]
.79 [20] .79 [20]
[25.2] .99 [25.2] .99
.55 [14] [14] .55
W210-01GF W210-01GF
[200] 7.87 7.87 [200]
.91 [23] .91 [23]
1.11 [28.3] [28.3] 1.11
[16] .63 [16] .63
Request Info
1-800-453-1692 www.aboveboardelectronics.com
[email protected] 800.433.5554ME
[email protected] To PlaceOrder: Order: t 800.433.5554 To Place
251
-----
Hinges
SIERRA
C
Brass Bushing Pin, Brass Steel Pin, Body, Removable Removable Steel Bushing Steel Steel Body, (L) Length (L) Length
(D) Body Body Dia. Dia. (D)
(H) Thickness Thickness (H)
Pin Pin Dia. Dia. (d) (d)
1.97 [50] 1.97 [50]
[8] .31 [8] .31
[9.6] .37 [9.6] .37
.20 [5] .20 [5]
W140-03 W140-03
[80] 3.15 [80] 3.15
[13] .51 [13] .51
[15.4] .61 [15.4] .61
[8] .31 [8] .31
W160-03 W160-03
[100] 3.94 [100] 3.94
[16] .63 [16] .63
[19.5] .77 .77 [19.5]
.39 39 [10] [10]
W190-03 W190-03
5.91 [150] [150] 5.91
[20] .79 [20] .79
[25.2] .99 [25.2] .99
[13] .50 [13] .50
W210-03 W210-03
[200] 7.87 7.87 [200]
[23] .91 [23] .91
[28.3] 1.11 [28.3] 1.11
[16] .63 [16] .63
(L) Length (L) Length
(D) Body Body Dia. Dia. (D)
(H) Thickness (H) Thickness
Pin Pin Dia. Dia. (d) (d)
W100-10 W100-10
1.57 1.57 [40] [40]
[8] .31 [8] .31
[9.6] .37 [9.6] .37
[5] .20 .20 [5]
W110-10 W110-10
1.97 1.97 [50] [50]
[8] .31 [8] .31
[9.6] .37 [9.6] .37
.20 [5] .20 [5]
W120-10 W120-10
[60] 2.36 2.36 [60]
[10] .39 [10] 39
.47 [12] .47 [12]
[6] .24 [6] .24
W130-10 W130-10
2.76 [70] 2.76 [70]
[11.5] .45 [11.5] .45
.52 [13.2] .52 [13.2]
.24 [6] .24 [6]
W140-10 W140-10
3.15 3.15 [80] [80]
.51 [13] .51 [13]
[15.4] .61 [15.4] .61
[8] .31 31 [8]
W160-10 W160-10
3.94 [100] 3.94 [100]
[16] .63 [16] .63
[19.5] .77 .77 [19.5]
[10] .39 39 [10]
W170-10 W170-10
4.72 [120] 4.72 [120]
[16] .63 [16] .63
.77 [19.5] .77 [19.5]
[10] .39 39 [10]
W180-10 W180-10
5.31 5.31 [135] [135]
[18] .71 [18] .71
.90 [22.9] .90 [22.9]
.50 .50 [13] [13]
W190-10 W190-10
5.91 5.91 [150] [150]
[20] .79 [20] .79
[25.2] .99 .99 [25.2]
.50 [13] .50 [13]
W210-10 W210-10
7.87 7.87 [200] [200]
[23] .91 [23] .91
1.11 [28.3] 1.11 [28.3]
.63 [16] .63 [16]
(L) Length Length (L)
(D) Body Body Dia. Dia. (D)
(H) Thickness (H) Thickness
Pin Pin Dia. Dia. (d) (d)
1.57 1.57 [40] [40]
[8] .31 [8] .31
[9.6] .37 [9.6] .37
.20 .20 [5] [5]
W110-20 W110-20
1.97 1.97 [50] [50]
[8] .31 [8] .31
[9.6] .37 [9.6] .37
.20 [5] .20 [5]
W120-20 W120-20
[60] 2.36 2.36 [60]
[10] .39 [10] 39
.47 [12] .47 [12]
[6] .24 [6] .24
W130-20 W130-20
2.76 [70] 2.76 [70]
[11.5] .45 [115] .45
[13.2] .52 .52 [13.2]
.24 [6] .24 [6]
W140-20 W140-20
3.15 3.15 [80] [80]
.51 [13] .51 [13]
.61 [15.4] .61 [15.4]
[8] .31 31 [8]
W160-20 W160-20
3.94 [100] 3.94 [100]
[16] .63 [16] .63
[19.5] .77 [19.5] .77
[10] .39 39 [10]
W180-20 W180-20
5.31 5.31 [135] [135]
[18] .71 [18] .71
[22.9] .90 [22.9] .90
.50 [13] .50 [13]
W190-20 W190-20
5.91 5.91 [150] [150]
.79 [20] .79 [20]
.99 [25.2] .99 [25.2]
.50 [13] .50 [13]
W200-20 W200-20
7.09 7.09 [180] [180]
[20] .79 [20] .79
[25.2] .99 [25.2] .99
.55 [14] .55 [14]
7.87 7.87 [200] [200]
[23] .91 [23] .91
[28.3] 1.11 1.11 [28.3]
.63 [16] .63 [16]
Part Part Number Number
W110-03 W110-03
411.MME=n1M
NMI L
D
H d
Stainless Steel Stainless Steel Steel Pin, Pin, Stainless Stainless Steel Steel Bushing Bushing Fixed Stainless Body, Fixed Steel Body, Stainless Part Number Number Part
L
D
H d
Aluminum Body, Fixed FixedStainless Stainless Steel Steel Pin, Pin, Stainless Stainless Steel Steel Bushing Bushing Aluminum Body, Part Part Number Number
W100-20 W100-20
D
L
H H d
W210-20 W210-20
Grease Fitting Pin with Steel Steel Pin with Grease Fitting Fixed Steel Body, Fixed Steel Body,
D
L d
H .37 9.5 .37[95] TOTAL LENGTH TOTAL LENGTH
252 252
Download 3Dmoons @ www.spep.com @ www.spep.com Download
Part Part Number Number
Length Length (L) (L)
Body Body Dia. Dia. (D) (D)
Pin Pin Dia. Dia. (d) (d)
Height Height (H) (H)
Width Width (W) (W)
Total Total Length Length
W432 W432
4.09 4.09 [103.9] [103.9]
.98 .98 [24.9] [24.9]
.63 .63 [16.0] [16.0]
1.36 136 [34.5] [34.5]
1.06 1.06 [26.9] [26.9]
4.92 4.92 125.0] 125.0]
W431 W431
5.94 5.94 [150.9] [150.9]
1.38 1.38 [35.1] [35.1]
.75 .75 [19.1] [19.1]
1.75 1.75 [44.5] [44.5]
1.50 1.50 [38.10 [38.10
[170.9] [170.9]
►finish: clear coated coated finish: clear ►includes: includes: grease fitting fitting 1/4" grease ►1/4!' bearing ball bearing steel ball hardenedsteel I chrome plated hardened chrome plated grease I high lithium grease temperaturelithium high temperature
W
Request Info
1-800-453-1692 www.aboveboardelectronics.com
6.73 6.73
Hinges and Industrial "---"--Hardware Hinge,
W420 W420
Length Length (L) (L)
Body Body Dia. Dia. (D) (D)
Pin Pin Dia. Dia. (d) (d)
3.00 3.00 [76.2] [76.2]
.625 .625 [15.9] [15.9]
.36 .36 [9.1] [9.1]
low LL
Hinges
Stainless Steel Barrel Barrel Hinge Pin Stainless Steel Hinge with with Stainless Stainless Steel Steel Pin Part Part Number Number
D d d
rfe
Steel Barrel Barrel Hinge Pin Steel Hinge with with Steel Steel Pin Part Part Number Number
W405 W405
Length Length (L) (L)
Body Body Dia. Dia. (D) (D)
Pin Pin Dia. Dia. (d) (d)
6.00 6.00 [152.4] [152.4]
1.000 1.000 [25.4] [25.4]
.50 .50 [12.7] [12.7]
Length Length (L) (L)
Body Body Dia. Dia. (D) (D)
Pin Pin Dia. Dia. (d) (d)
4.00 4.00 [101.6] [101.6]
1.00 1.00 [25.4] [25.4]
.74 .74 [18.8] [18.8]
pin not fixed
Steel Barrel Hinge with Steel Pin Part Part Number Number
W426 W426
L
D
d
Steel Barrel Steel Barrel Barrel Hinge Hinge with with Steel Steel Pin Pin and and Grease Grease Fitting Fitting Grease Grease Fitting Fitting Material Material
Part Part Number Number
Length Body Dia. Dia. Pin PinDia. Dia. Length Body (L) (D) (d) (L) (D) (d)
W400 W400
4.50 4.50 [114.3] [114.3]
.750 [19.1] [19.1] .750
.50 .5 0 [12.7] [12 .7]
brass brass
W401 W401
6.50 6.50 [165.1] [165.1]
.750 [19.1] [19.1] .750
.50 .50 [12.7] [12.7]
brass brass
W425 W425
7.00 7.00 [177.8] [177.8]
1.250 1.250 [31.8] [31.8]
1.00 1.00 [25.4] [25.4]
brass brass
W430 W430
4.00 4.00 [101.6] [101.6]
1.00 [25.4] [25.4] 1.00
.75 .75 [19.1] [19.1]
steel steel
L
D --D
dd
additional 1/4" ¼" grease I additional grease fittings fittings may may be be purchased purchased separately separately
Steel Barrel Hinge Steel Barrel Hinge with with Steel Steel Pin Pin and and Accessories Accessories Part Number
W400-02 W400-02
Length Length (L) (L)
Body Body Dia. Dia. (D) (D)
Pin Pin Dia. Dia. (d) (d)
2.88 2.88 [73.2] [73.2]
.750 .750 [19.1] [19.1]
.50 .50 [12.7] [12.7]
¼" grease ►1/4" grease fitting fitting greasefitting fitting and and washer washer hold I grease hold hinge hinge together together additional 1/4° ¼" grease ►additional grease fittings fittings may may be be purchased purchased separately separately
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To Place Place Order: Order ta 800.433.5554
[email protected] [email protected]
253
Hinges
'"" 'I PACIFIC Steel Barrel Barrel Hinge Body and and Grease Grease Fitting Steel Hinge with with Steel Steel Body Fitting Part Part Number Number
C
W427 W427
Length Length (L) (L)
Body Body Dia. Dia. (D) (D)
Pin Pin Dia. Dia. (d) (d)
10.00 10.00 [254.0] [254.0]
1.063 1.063 [27.00] [27.00]
.787 .787 [20.00] [20.00]
thesheet sheetmetal metaltear-drop tear-drophousing housingisis specially specially shaped I the shaped for easier for easier welding welding fitting ► ¼" lls" grease grease fitting 1.31 33.3
LL
.106 2.70 THK.
1.06 27.0 .06[27.0
d d D
t
3.70 94.0 3.70[94.0]
Steel Barrel Barrel Hinge Body and and Grease Grease Fitting Steel Hinge with with Steel Steel Body Fitting Part Part Number Number
W429 W429
rimie
Length Length (L) (L)
Body Body Dia. Dia. (D) (D)
Pin Pin Dia. Dia. (d) (d)
8.63 8.63 [219.2] [219.2]
1.000 1.000 [25.40] [25.40]
.738 .738 [18.75] [18.75]
Length Length (L) (L)
Body Body Dia. Dia. (D) (D)
Pin Pin Dia. Dia. (d) (d)
6.00 [152.4] [152.4] 6.00
1.00 [25.4] [25.4] 1.00
.75 [19.1] [19.1] .75
fitting ► ¼" lls" grease grease fitting
LL
D
t r
d 4.00[101.6] [101.6] 4.00
Steel Barrel Barrel Hinge with Grease Grease Fitting Fitting and and Welded Welded Bar Bar Steel Hinge with Part Number
W422 W422
fitting ► ¼" lls" grease grease fitting L L
D
11
d d
Three Piece Barrel Hinge Three Piece Barrel Hinge
. _74
Part Part Number Number
Length Body Dia. Dia. Pin PinDia. Dia. Length Body (L) (D) (d) (L) (D) (d)
Material Material
W412-A01 W412-A01
10.00 .969 .75 10.00 .969 .75 [254.0] [24.61] [19.1] [254.0] [19.1] [24.61]
aluminum aluminum
¼" grease ►1/4" grease fitting fitting patented patented
-I
I-
I
r°1
J I_
254 254
Download 31:Immo @ Download @www.spep.com www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part Part Number Number
W412 W412 W412-A W41 2-A
steel steel
Body Dia. Pin Dia. Dia. Body Dia. Pin (D) (d) (D) (d)
10.00 10.00 [254.0] [254.0]
.969 .969 [24.61] [24.61]
.75 .75 [19.1] [19.1]
steel steel
12.00 12.00
aluminum aluminum
[304.8] [304.8]
.969 .969 [24.61] [24.61]
.69 .69 [17.5] [17.5]
aluminum aluminum
W413 W413 W413-A W41 3-A
Length Length (L) (L)
Material Material
Hinges
Three Piece Piece Barrel Three Barrel Hinges Hinges
patented
I1¼" /4" grease greasefitting fitting in in the the middle middle LL
d
I
D D
I
J L 1.00 1.00 [25.4] [25.4] 3-
Barrel Hinges Weld Guides Guides Barrel Hinges with with Weld Three Piece Piece Barrel Guides Three Barrel Hinges Hinges with with Weld Weld Guides Part Part Number Numb
Material
Length ength (L) (L)
W412SK W4125K
steel steel
10.00 10.00 [254.0] [254.0]
W413SK W4135K
steel steel
12.00 12.00 [304.8] [304.8]
Body Pin Dia. Dia. BodyDia. Dia. Pin (D) (d) (D) (d) .969 .969 [24.6] [24.6]
.75 .75 [19.1] [19.1] patented
►¼" Ys"grease greasefitting fittingin inthe the middle middle weldguides guidesassist assist for for positioning and alignment alignment I weld positioning and LL
d d
D weld guides 1.00 1 .0 0[25.4] [25.4]
Barrel Hinges Hinges with Weld Guides Guides Barrel with Weld I
Part Part Number Number
Material Material
Weld Weld Guides Guides
steel yes W430SK W4305K steel yes
W430* W430*
steel steel
none none
Length Body Body Dia. Dia. Pin PinDia. Dia. Length (L) (D) (d) (L) (D) (d) 4.00 4.00 [101.6] [101.6]
1.00 1.00 [25.4] [25.4]
.75 .75 [19.1] [19.1]
¼" ►1/ 4" grease grease fitting fitting weldguides guidesassist assist for for positioning I weld positioning and and alignment alignment partno. no.W430 W430does doesnot nothave have weld weld guides guides I part
L
D
d d
Winged Barrel Barrel Hinge Winged Hinge Material Material
Finish Finish
Length gth (L) L)
Leaf
W435 W435
steel steel
clear clear coated coated
7.0 7.0 [177.8] [177.8]
3.35 335 [85.1] [85.1]
W436 W436
steel steel
clear clear coated coated
3.5 3.5 [88.9] [88.9]
1.57 1.57 [39.9] [39.9]
Part Number
►304SS 304SS axial axial ball ball bearing bearing
L
1.11 28.1
.780 [19.80] 19.80 0 .780 1.10 28.0
LEAF LEAF TYP. TYP.
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.25 [6.3] 6.3 .25
.150 3.80 THK.
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
255 255
Hinges
Die Die Cast Cast Zinc Zinc Offset Offset Lift-off Lift-off Hinge Hinge Part Part No. No. 2.01 [51.0] 51.0 2.01
C
.72 18.2 .72 [18.2]
11.0 .43 [11.0] .43
.51 13.0 .51 [13.0] TYP. TYP.
H2273BK H2273BK
Material Material
Finish Finish
die zinc die cast cast zinc
black black powder powder coated coated
.30 [7.5] 7.5 .30
FRONT VIEW FRONT VIEW
SIDE VIEW S IDE VIEW
1.57 40.0 .79 20.0
.77 19.5
1.20 30.5
M5 THD. HOLE HOLE M5 THD. (5) PLCS. (5) PLCS.
.22 5.5 PIN
.59 15.0 BOTTOM VIEW BOTTOM VIEW
Die Die Cast Cast Zinc Zinc Lift-off Lift-off Hinges Hinges
EW FF Ell T AMILY
Part Number
t/P
Description Description
ML51LH ML51LH
left left hand hand
ML51RH ML51RH
right right hand hand
Material Material
Finish Finish
die zinc die cast cast zinc
textured black black powder textured powder coat coat
die texturedblack blackpowder powder coat coat die cast castzinc zinc textured
304SS pin, ►304SS pin,studs studs and and washer washer .61 15.5 .81[15.5]
2.36 60.0 2.36[60.0] CENT. CENT.
.55 14.0 .55[14.0]
2.56 65.0
3.15 80.0 ..-3.15[80.0]-.-
1.77 45.0 1.77[45.0] CENT. CENT.
1.55 39.2 1.55[39.2] TYP. TYP. TOP VIEW T P VIEW
.059 1.50 THK. THK. .059[1.50] WASHER WASHER
M8 MB THREAD THREAD (4) PLACES (4) PLACES
.31 8.0 .31[8.0] END VIEW END VIEW
BOTTOM VIEW BOTTOM VIEW
2.50 [63.5] Offset Offset Lift-off Lift-off Hinges 2.50 [63.5] Hinges with with Threaded Threaded Holes Holes or or Studs Studs Part Part Number Number
Leaves Leaves Material Material
Leaves Leaves Finish Finish
Thread Thread Size Size
die cast cast zinc zinc die
matte black matte black powder powder coat coat
M5 M5
die cast cast zinc zinc die
matte black matte black powder powder coat coat
M5 M5 studs studs
Description Description
ML55LH ML55LH
left left hand hand
ML55RH ML55RH
right right hand hand
ML55LH-01 ML55LH-01
left left hand hand
ML55RH-01 ML55RH-01
right right hand hand
304SS pin ►304SS pin and and studs studs 87(170]
.67 17.0
1.28 32.5
1.28 32.5
.67 17.0
part ML55LH part number: number: ML55LH left left hand hand shown shown
1.25 31.9 2.52 64.0 2521..01 2.52 64.0
2.00 50.8 M5 THREAD x .31 [8.0] DEEP (2) PLACES .43 11.0
.43 11.0 .39 10.0
2.00 50.8 M5 THD. (2) STUDS
.69 17.5
.69 17.5
M5 THREAD x .31 [8.0] DEEP (2) PLACES
.69 17.5
.39 10.0
.43 11.0
.315 8.00
.315 8.00 2.52 64.0
.59 15.0
2.52 64.0
M5 THD. (2) STUDS
1.25 31.9
part ML55RH-01 part number: number: ML55RH-01 right right hand hand shown shown part ML55LH part number: number: ML55LH left left hand hand shown shown
256 256
Download 3DmoDELs @ @www.spep.com www.spep.com Download
part ML55RH-01 part number: number. ML55RH-01 right right hand hand shown shown
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware -----11---1.. ctrial Hardware
Part Part Description Material Finish Finish Number Description Material Number
ML50LH ML5OLH
left hand hand left
reinforced reinforced plastic plastic
black black
ML50RH ML5ORH
right hand right hand
reinforced reinforced plastic plastic
black black
304SS pin ►304SS pin
Hinges
Plastic Lift-off Plastic Lift-off Hinges Hinges
.79 20.0 .79[20.0]
2.91 74.0 2.91[74.0]
2.36 60.0 ] 2.36[60.0
1.42 36.0 1.42[36.0]
.209 5.3 HOLE HOLE WITH WITH 0.209[5.3]
.28[ .28 7.0 7.0 ]
2.01 51.0 2.01[51.0]
.374 [9.50] [9.50] xx 90° 90 C'SINK C'SINK 0.374 (4) PLACES PLACES (4)
Die Cast Cast Zinc Die Zinc Lift-off Lift-off Hinge Hinge Part No. Part No.
Material Material
Finish Finish
H2252BK H2252BK
die cast cast zinc die zinc
matte black matte black
4g/
steel, nickel plated pin
2.76 [70.0] 70.0 2.76 A
.47 12.0 .47[12.0] TYP. TYP.
.25 [6.4] 6.4 .25 TYP. TYP.
.40 10.2 .40[10.2] TYP. TYP.
1.38 [35.0] 35.0 1.38
2.09 53.0
A
.236 6.00 0.236[6.00] (4) PLACES PLACES (4)
.65 [16.5] 16.5 .65
SECTION A-A SECTION A-A
1.97 [50.0] 50.0 1.97
Lift-off Hinge Lift-off Hinge Part No. Part No.
H2278CH H2278CH
Material Material
Finish Finish
die cast cast zinc die zinc
chrome plated chrome plated
steel, nickel nickel plated plated pin I steel, pin brass bushing bushing I brass 2.68 [68.0] 68.0 2.68 CENT. CENT.
.173 [4.40] 4.40 THRU THRU HOLE HOLE WITH 0.173 Ø .3543 .3543 [9.000] 80° C'SINK [9.000] xx80° CSINK (2) PER PER LEAF (2) LEAF
TOP VIEW ONE LEAF REMOVED TO SHOW HOLE HOLE DETAILS DETAILS
.57 14.4 57 [14.4] CENT. CENT.
3.15 [80.0] 80.0 3.15
.91 23.0 91 [2 3.0]
1
Ø.240 [6.10] [6.10] PIN 0.240
.17[4.2] 4.2 L.17 FRONT VIEW FRONT
Request Info
1-800-453-1692 www.aboveboardelectronics.com
SIDE VIEW
To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
257 257
Hinges
SIERRA PACIFY' 3.74 [95.0] Lift-off Lift-off Hinges with Covers Covers 3.74 [95.0] Hinges with
EW PR,DIJ
f
AMILY .51 [13.0] 13.0 .51
.43 [11.0] 11.0 .43
.43 [11 11.0 .43 .0]
C
1.18 30.0 1.18 [30.0]
1.85 47.0 1.85 47.0]
Li
ML60-01 ML60-01 front mount front mount
H .209 [5.30] 5.30 HOLE HOLE W/ W/ 0.209
M5 x x .8 .8 THD. M5 THD. (2) PLCS. (2) PLCS. .30 [7.5] 7.5
.315 [8.0] 8.0 0.315
.96 24.5 .96[24.5]
Part Part No. No.
Material Material
Finish Finish
Holes Holes
ML60 ML60
steel steel
zinc zinc plated plated
blind blind mount mount
ML60-01 ML60-01
steel steel
zinc zinc plated plated
front front mount mount
covermaterial: material: 304SS 304SS I cover coverfinish: finish: mirror I cover mirror polished polished only the themale male leaf leaf has has blind blind I only or front option, female female or front mount mount option, leaf leaf is is blind blind mount mount only only
M5 xx .8 .8 THD. THD. M5 (2) PLCS. PLCS. (2) (ML60 ONLY) (ML60 ONLY)
.393[10.00] [10.00] xx .20 .20 [5.08] [5.08] 0.393 DEEP C'BORE C'BORE DEEP (2) PLCS. PLCS. (2) (ML60-01 ONLY) (ML60-01 ONLY)
i F 1.89 48.0 1.89 48.0]
1.85 47.0 1.85 [47.0]
1.18 30.0 1.18 [30.0]
part shown part no. no. ML60-01 ML60-01 shown
1.96 [49.8] Lift-off Lift-off Hinge, Solid Brass Brass 1.96 [49.8] Hinge, Solid .39 10.0 .39[10.0]
.59 15.0
.98 25.0
.51 13.0 .51[13.0]
M6 xx11THD. M8 ND. (2) PLCS. .236 6.00 0.238[8.00]
Part No.
ML11CH ML11 CH
Material Material
Finish
solid brass solid brass
chrome chrome plated plated
includes(4) (4) nickel nickel plated platedM6x1 M6x1 I includes mounting screws mounting screws 304SS pin ►304SS pin
.79 20.0 .79[20.0]
.98 25.0 .96125.0]
.59 15.0 .59[15.0]
.51 13.0 .51[13.0]
M6 M8 xx 11 THD. TED. xx.32 .32 [8] [8] DEEP (2) PLCS.
.39 10.0 .39[10.0]
3.15 [80.0] Lift-off Lift-off Hinge, Hinge, Solid Solid Brass Brass 3.15 [80.0] .59 15.0 59[15.0]
1.57 40.0 1.57[40.0]
-
.39 10.0 .39[19.9]
1.10 28.0 1.10128.0]
M6 xx 1 M8 1 THD. THD. x .32 [8] [8] DEEP DEEP x.32 (2) PLCS.
.236 6.00 0-236[8D0]
1.02 26.0 1D2[28D]
M6 xx 1 M8 1 THD. THD. x .32 [8] [8] DEEP DEEP x.32 (2) PLCS.
1.57 40.0 1.57[40.0]
1.10 28.0 1.10[28.0]
.59 15.0 .59[15.0]
.39 10.0 .39[10.0]
Part Part No. No.
Material Material
Finish Finish
ML13CH ML13CH
solid brass solid brass
chrome chrome plated plated
ML13CH-01* ML1 3CH-01*
solid brass solid brass
chrome chrome plated plated
includes(4) (4) nickel nickel plated platedM6x1 M6x1 I includes mounting screws mounting screws 304SS pin ►304SS pin part no. no. MLCH13-01 MLCH13-01 does does not I part not include include fasteners fasteners
3.23 [82.0] Offset Offset Lift-off Lift-off Hinge, Hinge, Solid Solid Brass Brass 3.23 [82.0] .33[16.0]
.63 16.0
161[10] 1.61 41.0
.47 12.0 .47[12.0]
Part Part No.
ML15CH ML15CH
Material
Finish
solid brass solid brass
chrome chrome plated plated
1.14 29.0 1.14[29D]
M6 x 1 THD. M8 x .32 [8] DEEP (2) PLCS.
includes(4) (4) nickel nickel plated platedM6x1 M6x1 I includes mounting screws mounting screws ►304SS 304SS pin pin
.236 6.00 -. - 0.236[6.00]
.98 25.0
1.61 41.0
.94 24.0 .94[24D]
258 258
Download 31)moDELs @ @www.spep.com www.spep.com Download
M6 xx1 1 THD. M8 ND. x .32 [8] DEEP (2) PLCS. PLCS. (2)
1.14 29.0 1.14[29D]
.47 12.0 .47[12.0]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part Part Number Number
ML16SS ML16SS ML16SS-01 affl) ML1655-01
Material Material
Finish Finish
.52 13.2
316SS 316SS
mirror mirror polished polished
304SS 304SS
mirror mirror polished polished
1.63 41.5 1.63[41.5
1.14 29.0 1.14[29.0]
316SS pin ►316SS pin
Hinges
3.27 [83.0] Lift-off Lift-offHinges, Hinges, Stainless Stainless Steel 3.27 [83.0] Steel 152[132r-
3 1 655 .64 16.2 .64[16.2]
M6 xx 11 THD. MO (2) PLACES
.236 6.00 0.236[6.00]--
1.00 25.4 1.00[25.4]
M6 x 1 THD. MB PLACES /(2) (2) PLACES
1.63 41.5 1.63[41.5]
CD
1.14 29.0 1.14[29.0]
0 .52 13.2 1'152[13 2 ]1-1
.64 16.2
3.00 [76.0] Lift-off Lift-offHinges, Hinges, Stainless Stainless Steel 3.00 [76.0] Steel Material Material
Finish Finish
ML17SST-01 ML17SST-01
316SS 316SS
brushed brushed
ML17SST-02* ML17SST-02*
316SS 316SS
brushed brushed
Part Number Part Number
.73 18.5
1.50 38.0
1.50 38.0 1.50[38.0]
l
1.50 38.0
1.50 38.0
.75 19.0 .75[19.0]
.75 19.0
M6 THD. (2) PLCS.
M6 THD. (2) PLCS.
male leaf ML17SST-02 has has aa ►** male leaf for for part part no. no. ML17SST-02 .25[6.4] offset .25[6.4] offset 1.02 26.0
12.518.5 .73 18.5 .49 .73
.49 12.5
.73 18.5
1.50 38.0 1.50[390]
.73 18.5
.49 12.5
.75 19.0 .75[19.0]
.75 19.0
M6 THD. MO THD. (4) PLCS.
M6 THD. (4) PLCS.
ML17SST-02 ML1755T-02 male leaf male leaf with with offset offset
.236 6.00
.236 6.00
M6 THD. (2) PLCS.
M6 THD. 1.02 26.0 (2) PLCS.
1.02 26.0 1.02[26.0]
.73 18.5 .T3[18.5]
.236 6.00
.236 6.00
.75 19.0
.75 19.0
.75 19.0
.75 19.0
38.0 1.50 38.0]
1.02 26.0
1.56 39.7 56[391]
1.56 39.7
part part number: number: ML17SST-01 ML1755T-01
.49 12.5 •LE[125]
.49 12.5 .49[12.5]
part part number: number: ML17SST-02 ML1755T-02
.49 12.5 .98 24.9
.98 24.9 -.98[24.9]-1
.52 13.2 52[13.2]
.52 13.2
3.23 [82.0] [82.0] Offset Offset Lift-off Lift-off Hinge, Hinge, Stainless Stainless Steel 3.23 Steel Part Number
Material
Finish Finish
ML18SS ML1855
304SS 304SS
mirror polished polished mirror
.63 16.0
.47 12.0 .45[12.0]
1.61 41.0
1.14 29.0 1.14[29.0]
maleleaf leafhas has .12 .12 [3.0] [3.0] offset I male offset 304SS pin, pin,mill mill finish finish ►304SS
J M6 THD. (4) PLCS.
.24 6.0 0.24[6.0]
.99 25.3 .99[25.3]
1.61 [ 41.0 1.61 .0 ]
1.14 29.0 1.14[29.0]
.75 19.0 -4..75[19.0]
.47 12.0 .45[12.0]
3.15 [80.0] [80.0] Lift-off Lift-offHinge, Hinge,Die DieCast Cast Zinc Zinc 3.15 Part Part No. No.
ML38 ML38
Material Material
Finish Finish
die cast zinc die cast zinc
black black powder powder coated coated
steel, nickel nickel plated I steel, plated pin pin
.63 16.0 .0] -63 [18
.47 12.0 .47[12.0]
1.57 [40.0] 40.0 1.57
1.14 29.0 1.14[29.0]
M6 xx 1 1 THD. M8 THD. (2) PLACES 121 PLACES .88 22.3
.24 6.0
1.57 40.0
.63 16.0 Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.14 29.0
.47 12.0
M6 xx11 THD. THD. M8 .315 [8.00] [8.00] W.315 (2) PLACES 121 PLACES
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
259 259
Hinges
SIERRA PACIFY'
1.65 [42.0] Lift-off Lift-offHinge, Hinge,Die DieCast Cast Zinc Zinc 1.65 [42.0] b
C
.50 [12.8] 12.8 .50
Part Part No. No.
10.6 .42 [10.6]
ML39 ML39
i
0
.83 [21.0] 21.0 .83
Material Material
Finish Finish
die cast zinc die cast zinc
matte black black matte
steel, zinc zinc plated plated pin I steel, pin
.47 [12.0] 12.0 .47
II
-4.69 [17. 17.55] .69
0
.83 21.0 .83[221.0]
.50 [12.8] 12.8 .50
M4 xx 0.7 0.7 THD. THD. M4 (4) PLACES PLACES (4)
24 6.0 [6 0] -.0 .24 '
12.0 .47 [12.0]
.42 10.6 .42[10.6]
2.36 [60.0] Offset Offset Lift-off Lift-off Hinge, Hinge, Die Die Cast Cast Zinc Zinc 2.36 [60.0] 12.0 .47 [12.0]
10.2 .40 [10.2]
Part No.
Material Material
Finish Finish
ML14CH ML14CH
die cast zinc die cast zinc
bright chrome plated bright chrome plated
steel, nickel nickel plated I steel, plated pin pin 30.0 1.18 30.0]
18.0 .71 [18.0]
0 °1 M5 x 0.8 THD. .315 [8.00] [8.00] ✓ .315 (2) PLACES. 21.0 .83 [21.0]
5.0 .20 [5.0] 0.20
1.18 [30.0] 30.0
.71 [18.0] 18.0
10.2 .40 [10.2]
.63 16.0 63[16.0]
2.56 [65.0] Lift-off Lift-off Hinge, Hinge, Die Die Cast Cast Hinge 2.56 [65.0] Hinge
M5 x 0.8 THD. ✓ .315 [8.00] (2) PLACES.
CD
.47 [12.0] 12.0 .47
.39 10.0 .39[10.0]
Part No.
Material Material
Finish Finish
ML47CH ML47CH
die cast zinc die cast zinc
bright chrome plated bright chrome plated
pin&&body bodyare are one one solid solid piece piece I pin .55 [14.0] 14.0 .55 1.57 [40.0] 40.0 1.57 .83 21.0 83 [21.0]
11.0 .43 [11.0]
M5 xx 0.8 0.8 THD. THD. M5 (2) PLACES PLACES (2)
.24 [6.0] 6.0 0.24
.98 [25.0] 25.0 .98
.47 [12.0] 12.0 .47
.55 [14.0] 14.0 .55
M5 xx 0.8 0.8 THD. THD. M5 (2) PLACES PLACES (2)
.39 [10.0] 10.0 .39
2.41 [61.1] Offset Offset Lift-off Lift-off Hinge, Hinge, Die Die Cast Cast Zinc Zinc 2.41 [61.1] .54 [13.8] 13.6
13.0 .51 [13.0]
Part Part No. No.
Material Material
Finish Finish
ML48CH ML48CH
die cast zinc die cast zinc
bright chrome plated bright chrome plated
pin&&body bodyare are one one solid solid piece piece I pin 16.0 .63 [16.0]
30.6 1.20 [30.6]
M5 x 0.8 THD. (2) PLACES .24 6.0 .24[8.0] 16.3 .64 [18.3] .84
1.20 30.5 1.20[30.5]
16.0 .63 83 [18.0]
260 260
Download www.spep.com Download3DmoDELs @ @ www.spep.com
.63 [18.0] 16.0 .83
.51 13.0 .51[13.0]
M5 x 0.8 THD. .453 [11.50] [11.50] 7 .453 (2) PLACES Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part No. Part No.
ML49SS ML4955
Material Material
Finish Finish
stainless steel stainless steel
mill mill
304SS pin ►304SS pin
.75 19.0 .75[,9.0]
.63 16.00] 63 [16
1.50 38.0 1.50 [38.0]
1.00 [25.5] 25.5 1.00
Hinges
3.00 [76.0] [76.0] Lift-off Lift-offHinge, Hinge,Stainless Stainless Steel 3.00 Steel
M6 xx 1 1 THD. THD. M6 (2) PLACES PLACES (2) .87 22.1 .87[22.1]
.31 [7.9] 7.9 0.31
1.50 38.0 1.50 [38.0]
1.00 [25.5] 25.5 1.00
.75 19.0 .75[ 9.0]
.63 16.0 .63[,6.0]
M6 xx 1 1 THD. THD. M6 .472 [12.00] .472 [12.00] (2) PLACES PLACES (2)
-
1.97[50.0] [50.0]Offset OffsetLift-off Lift-offHinge, Hinge,Die DieCast Cast Zinc Zinc 0011.97 Part Part Number Number
ML19CH ML19CH
Material
Finish Finish
die cast zinc die cast zinc
polished polished chrome chrome plated plated
.57 14.5 .sr[14.5]
all
.47 12.0
.98 25.0
.59 15.0
maleleaf leafhas has .20 .20 [5.0] [5.0] offset I male offset removablebrass brass pin I removable pin
M5 THD. (4) PLCS.
.59 15.0 .59E15.01
.24 6.0
.98 25.0 .se[z5.0]
.59 15.0
.47 12.0
.77 19.5
3.78 [96.0] [96.0] Plastic Plastic Lift-off 3.78 Lift-off Hinge Hinge Part Number Part Number
Material Material
ML20P ML2OP
Finish FinisME
ABS ABS
.58 14.8 .58[14.8]
.51 13.0 .51[13.0]
black black
304SS pin ►304SS pin
1.89 48.0 1.89[48.0]
1.19 30.2 1.19[30.2]
1/4-20 THD. INSERT (4) PLCS.
6.0 95.24 24[6.0]
.96 24.4 .96[24.4]
1.19 30.2 111 1.19[30.2]
1.89 48.0 1.89[48.0]
.51 13.0 .51[13.0]
.58 14.8 .58[14.8]
EW FF T AMILY
Part Part Number Number
Description Description
Material Material
ML22P-05 ML22P-05
left left hand hand
glass reinforced glass reinforced nylon nylon
black black
ML23P-05 ML23P-05
right hand right hand
glass reinforced glass reinforced nylon nylon
black black
2.44 [62.0] Plastic Plastic Lift-off 2.44 [62.0] Lift-off Hinges Hinges with with Clip Clip Retention Retention
Finish Finish 28.4 1.12 [28.4] 1.12
nylon pin pin I nylon includesplastic plastic clip clip & & rubber rubber insert I includes insert for for pin pin retention retention to female female leaf to leaf
www.aboveboardelectronics.com
.75 [19.1] 19.1 .75
.38 9.5 .38 [9.5]
n 1.16 29.4 .374 9.50 0.374[9.50]
.66 16.8 .66[16.8] 1-800-453-1692
I[
10-24 10-24 THREAD THREAD x x .472 .472 [12.00] [12.00] DEEP DEEP (4) PLACES PLACES (4)
.38 9.7 .38 [9.7]
1.12 28.4 1.12[28.4]
Request Info
31.0 1.22 [31.0] 1.22
1.22 [31.0] 31.0 1.22
.75 19.1 .75[19.1]
left left hand hand ML22P-05 ML22P-05 .85 [2 21.5 .85 .5]
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
261 261
Hinges
SIERRA PACIFIC
EM- - -
2.50 [63.5] Offset Offset Lift-off Lift-off Hinges 2.50 [63.5] Hinges with with Threaded Threaded Holes Holes Description Description
Material Material
Finish Finish
Thread Thread Size Size
ML05 ML05
left left hand hand
die zinc die cast cast zinc
matte black matte black powder powder coat coat
10-32 10-32
ML06 ML06
right right hand hand
die zinc die cast cast zinc
matte black matte black powder powder coat coat
10-32 10-32
ML05-01 ML05-01
left left hand hand
die zinc die cast cast zinc
matte black matte black powder powder coat coat
M5 M5
ML06-01 ML06-01
right right hand hand
die zinc die cast cast zinc
matte black matte black powder powder coat coat
M5 M5
Part Part Number Number
C
part part number: number: ML05 ML05 left left hand hand 1.27 [32.3] 32.3 1.27
includesDelrin Delrin washer I includes washer 1.23 31.2 1.23[31.2]
2.52 [64.0] 64.0 2.52
2.00 [50.8] 50.8 2.00
part part number: number: ML06 ML06 right right hand hand
THREAD SIZE THREAD SIZE .63 [16.0] [16.0] DEEP xx .63 DEEP (2) PLACES PLACES (2) .69 17.5 .69 [17.5]
.69 [17.5] 17.5 .69
.364 9.2 0.364[9.2]
.39 9.9 .39[9.9]
THREAD SIZE THREAD SIZE .63 [16.0] [16.0] DEEP xx .63 DEEP (2) PLACES PLACES (2) 2.18 55.3 1.21 30.8
.69 17.5 .69[17.5]
.59 [15.1] 15.1 .59
2.50 [63.5] Offset Offset Lift-off Lift-off Hinges with Through 2.50 [63.5] Hinges with Through Holes Holes Part Description PartNumber Number Description
ML07 ML07 ML08 ML08
Material Material
Finish Finish
die zinc die cast cast zinc
matte black matte black powder powder coat coat
right diecast castzinc zinc righthand hand die
matte black matte black powder powder coat coat
left left hand hand
includesDelrin Delrin washer I includes washer (2) rubber rubber caps caps (part (part no. I (2) no. ML30-C) ML30-0 only female female leaf leaf has I only has through through holes holes
• part ML07 part number: number. ML07 left left hand hand 1.23 31.2 2.52 [64.0] 64.0 2.52
1.27 32.3] 32.3 1.27
.69 [17 17.5 .5] .69
.215 [5.46] 5.46 HOLE HOLE WITH WITH 0.215 .360[9.14] [9.14] xx .24 .24 [6.1] [6.1] DEEP DEEP C'BORE C'BORE 0.360 (2) PLACES PLACES (2)
.39 9.9 .39[9.9]
2.00 50.8 2.00[80.8]
THD. 0-32 THD. x .63 .63 [16.0] [16.0] DEEP DEEP 1(2)10-32 (2) PLACES PLACES
.364 9.2
part part number: number. ML08 ML08 right right hand hand 2.18 55.3 .75 19.1 .75[19.1]
1.21 30.8
.69 17.5 .69[ 17.5]
262 262
Download 31:Immo @ Download @ www.spep.com www.spep.com
.59 05.11 15.1 .59
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware Hardware
Description Description
Material Material
Finish Finish
Thread Thread Size Size
left left hand hand
die cast zinc die cast zinc
matte black matte black powder powder coat coat
6-32 6-32
left left hand hand
die cast zinc die cast zinc
matte black matte black powder powder coat coat
M4 M4 xx .7 .7
ML46 ML46
right right hand hand
die cast cast zinc zinc die
matte black matte black powder powder coat coat
6-32 6-32
ML46-01 ML46-01
right right hand hand
die cast cast zinc zinc die
matte matteblack blackM4 x .7 M4 x .7 powder powder coat coat
Part Part Number Number
ML45 ML45 ML45-01 ML45-01
.78 [19.9] 19.9 --I .78
Hinges
Mini Mini 1.00 1.00 [25.4] [25.4] Offset Offset Lift-off Lift-off Hinges Hinges
.39 [9.8] 9.8 .39
part ML45 part number: number: ML45 left left hand hand
1.00 [25.5] 25.5 1.00 .38 9.7 .38 [9.7]
.03 [.8] .8 .03 .38 [9 9.5 .38 5]
THREAD SIZE THREAD SIZE .33 [8.4] [8.4] DEEP xx .33 DEEP (4) PLACES PLACES (4)
.44 [11.0] 11.0 .44
.37 9.3
.22 [5.5] 5.5 .22
.194 4.93 .02 .5 .93 23.7
.59 15.1
part M146 part number: number: ML46 right right hand hand
.38 9.7 .21 5.3 TYP. TYP.
Mini In-Line Lift-off Mini 1.13 1.13 [28.6] [28.6] In-Line Lift-off Hinges Hinges Material Material
Finish Finish
Thread Thread Size Size
ML42 ML42
die cast zinc die cast zinc
matte matte black black powder powder coat coat
6-32 6-32
ML42-01 ML42-01
die cast zinc die cast zinc
matte black powder matte black powder coat coat
M4 M4 xx .7 .7
Part Part Number Number
.34 8.7 .34 [8.7]
.50 12.7 .50[12.7]
THREAD SIZE THREAD SIZE .35 [8.9] [8.9] DEEP xx .35 DEEP
.69 [17.5] 17.5 .69 .75 19.1 .75[19.1]
1.10 28.0 1.10[28.0]
.33 8.4 .33[8.4]
.03 .8 .03[.8]
.20 [5.1] 5.1 TYP. TYP. 0.20
Ø.157 [4.00] [4.00] HOLE HOLE WITH WITH 0.157 Ø.308 [7.82] [7.82] xx 82° 82° C'SINK C'SINK 0.308
.33 [8.4] 8.4 .33
.193 4.9 0.193 [4.9] -
1.10 [28.0] 28.0 1.10
.03[.8] .8 - .03
.75 [19.1] 19.1 .75 .44 [11.3] 11.3 .44 THREAD SIZE DEEP THREAD SIZE xx .35 .35 [8.9] [8.9] DEEP
2.50 [63.5] Lift-off Lift-off Hinges 2.50 [63.5] Hinges Part Part Number Number
ML02 ML02 ML02-02 ML02-02 ML02-02SS ML02-0255 ML02-03 ML02-03
Material Material
Finish Finish
Thread Size Thread Size
matte black die die cast castzinc zinc matte black powder powder coat coat
10-32 10-32
die die cast cast zinc zinc
matte black matte black powder powder coat coat
M5 M5
304SS 304SS
passivated passivated
M5 M5
die die cast cast zinc zinc
.69 17.5 .69[17.5]
.59 15.1 .59[15.1]
1.21 30.8 1.21[30.8]
.75 19.1 .75[19.1]
matte black Ø.172plain plainholes holes matte black0.172 powder powder coat coat
includesDelrin Delrin washer I includes washer may be ►ML02 ML02 components components may be purchased purchased separately separately ML02G) AST/p gaskets gaskets available available separately separately (part (part no. no. ML020
Request Info
1-800-453-1692 www.aboveboardelectronics.com
THREAD SIZE (2) PLACES .364 9.25
.97 24.5
THREAD SIZE (2) PLACES
1.21 30.8
.75[19.1] .75 19.1
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
263 263
Hinges
SIERRA PACP'm
2.50 [63.5] Lift-off Lift-off Hinges with Through 2.50 [63.5] Hinges with Through Holes Holes Part Part Number Number
C
.59 15.1 .59[15.1]
.69 17.5 ] .69[17.5
1.21 30.8 1.21[30.8]
.215 5.46 HOLE HOLE WITH WITH 0.215[5.46] Ø.360 [9.14] [9.14] xx .24 .24 [6.1] [6.1] DEEP DEEP C'BORE C'BORE 0.360 (2) PLACES PLACES (2)
10-32 THD. THD. xx .63 10-32 .63 [16.0] [16.0] DEEP DEEP (2) PLACES PLACES (2)
.75 19.1 .75[19.1]
X
Material Material
Finish Finish
Caps Caps
ML32 ML32
die zinc die cast cast zinc
matte black matte black powder powder coat coat
yes yes
ML32-01 ML32-01
die zinc die cast cast zinc
matte black matte black powder powder coat coat
no no
includesDelrin Delrin washer I includes washer (2) rubber rubbercaps caps(part (partno. no.ML30-C) ML30-C) I (2) only female female leaf leaf has I only has through through holes holes
.364 9.25 0.364[9.25
.39 9.9 • .39[9.9]
2.18 55.3 2.18[55.3] .75 19.1 15[19.1]
1.21 30.8
3.72 [94.4]Adjustable AdjustableIn-Line In-Line Lift-off Lift-off Hinges with Caps Caps and 3.72 [94.4] Hinges with and Through Through Holes Holes Part Part Number Number
ML35 ML35 ML35SST ML3555T
0
0
1.46 37.1
1.00 25.4 1.00T5.4]
3 16SS
Material Material
Finish Finish
die matteblack blackpowder powder coat coat die cast castzinc zinc matte 316SS 316SS
brushed brushed
includes Delrin Delrin washer I includes washer
2.46 62.4 2.46[62.4]
.59 15.1 .59[151]
.215 5.46 HOLE HOLE WITH WITH 0.215[5.46] .360[9.14] [9.14] xx .24 .24 [6.1] [6.1] C'BORE C'BORE 0.360 TYP. TYP.
.69 17.5 17.5 ] .69[
.215 5.46 HOLE HOLE WITH WITH 0.215[5.46] .360[9.14] [9.14] xx .24 .24 [6.1] [6.1] C'BORE C'BORE 0.360 TYP. TYP.
.39 9.9 -•—.39[9.9]
.36 9.2
2.18 55.3 .75 19.1 15[19.1]
1.21 30.8 1.21[30.8]
3.72 [94.4] Lift-off Hinges Hinges with with Threaded Threaded Holes Holes 3.72 [94.4] Adjustable AdjustableIn-Line In-Line Lift-off Material Material
Finish Finish
Thread Thread Size Size
ML36 ML36
die zinc die cast cast zinc
matte black matte black powder powder coat coat
10-32 10-32
ML37 ML37
die zinc die cast cast zinc
matte black matte black powder powder coat coat
M5 M5
Part Part Number Number
1.46 37.1 1.46[37.1
1.00 25.4 1.00[25.4]
0
2.46 62.4 2.46[62.4]
includesDelrin Delrin washer I includes washer
(1e\ \
.59 15.1 1] .59[15
.59 15.1 .59[151]
10-32 THD. x .610 [15.50] DEEP [1THDix —1 34 25.50 (2) PLACES (2) PLACES
.69 17.5 ] .69[17.5
.39 9.9 .39[9.9]
.36 9.2 0 .36[9.2] 10-32 10-32 THD. THD. xx .610 [15.50] [15.50] DEEP .610 DEEP (2) PLACES (2) PLACES
2.18 55.3 2.18[55.3] 1.21 30.88] 1 21[30
.75 19.1 15[19.1]
Request Info
264 264
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part Part Number Number
ML21P ML21P ML21P-01 ML21P-01
Thread Thread Size Size
Material Material
Finish Finish
M5 M5
glass reinforced glass reinforced nylon nylon
black black
10-24 10-24
glass reinforced glass reinforced nylon nylon
black black
.75 19.0 .75[19.0]
1.22 31.00] 1 22[31
THREAD SIZE THREAD SIZE (SEE TABLE) (SEE TABLE)
.37 9.4 .37[9.4]
Hinges
2.44 [62.0] Plastic Plastic Lift-off Lift-off Hinges 2.44 [62.0] Hinges with with Threaded Threaded Holes Holes
.366 9.30 0.366[9.30] THREAD SIZE THREAD SIZE (SEE TABLE) (SEE TABLE)
1.14 29.0 1.14[29.01
.66 16.7 .66[16.7]
.75 19.0 .75[19.0]
.56 14.3 .56[14.3]
2.44 [62.0] Plastic Plastic Offset Offset Lift-off Lift-off Hinges 2.44 [62.0] Hinges with with Threaded Threaded Holes Holes Description Description
Thread Thread .e SSize iz
ML22P ML22P
left left hand hand
M5 M5
glass reinforced glass reinforcedblack black nylon nylon
ML23P ML23P
right right hand hand
M5 M5
glass reinforced glass reinforced nylon nylon
Part Part Number Number
Material Material
Finish Finish
black black
1.22 31.00] 1 22[31
.75 19.0 .75[19.0]
THREAD SIZE THREAD SIZE (SEE TABLE) TABLE) (SEE
.38 9.5 ]H .38[9.5
part ML22P part number: number. ML22P right right hand hand
.38 9.5 .38[9.5]
.366 9.3 0.366[9.3]
ML22P-01 ML22P-01
left left hand hand
glass reinforcedblack reinforced 10-24 glass black 10-24 nylon nylon
ML23P-01 ML23P-01
right right hand hand
glass reinforcedblack reinforced 10-24 glass black 10-24 nylon nylon
THREAD SIZE SIZE (SEE TABLE) TABLE)
1.14 29.0 1.14[29.0]
.66 16.7 .66[16.7]
le
.75 19.0 .75[19.0]
part ML23P part number: number. ML23P left left hand hand
.85 21.5 .85[21.5]
3.25 [82.6] Plastic Plastic Lift-off Lift-off Hinges 3.25 [82.6] Hinges with with Threaded Threaded Holes Holes Part Thread Size Size PartNumber Number Thread
ML26P ML26P ML26P-01 ML26P-01
Material Material
Finish Finish
M6 M6
glass reinforced glass reinforced nylon nylon
black black
1/4-20 1/4-20
glass reinforced glass reinforced nylon nylon
black black
1.63 41.3 1.63[41.3]
1.00 25.5
THREAD SIZE THREAD SIZE (SEE TABLE) (SEE TABLE)
.50 12.7 .50[12.7]
.482 12.3 0.482[12.3] THREAD SIZE THREAD SIZE (SEE TABLE) (SEE TABLE)
1.50 38.1 1.50[38.1]
.88 22.2 .88[22.2]
1.00 25.5 1.00[25.5]
.75 19.0 .75[19.0]
3.25 [82.6] Plastic Plastic Offset Offset Lift-off Lift-off Hinges 3.25 [82.6] Hinges with with Threaded Threaded Holes Holes Description Description
Thread Thread Size Size
ML27P ML27P
left left hand hand
M6 M6
glass reinforced glass reinforcedblack black nylon nylon
ML28P ML28P
right right hand hand
M6 M6
glass reinforced glass reinforced nylon nylon
Part Part Number Number
ML27P-01 ML27P-01 ML28P-01 ML28P-01
left left hand hand right right hand hand
Material Material
Finish Finish
black black
1/4-20 1/4-20
glass reinforced glass reinforcedblack black nylon nylon
1/4-20 1/4-20
glass reinforced glass reinforcedblack black nylon nylon
1.63 41.33] 1 63[41
.50 12.7 .50[12.7]
THREAD SIZE THREAD SIZE (SEE TABLE) (SEE TABLE)
1-800-453-1692
part ML27P part number: number: ML27P left left hand hand
.482 12.3 0.482[12.3]
.88 22.2 .88[22.2]
www.aboveboardelectronics.com
.50 12.7 .50[12.7]
THREAD SIZE (SEE TABLE) TABLE)
1.50 38.1 1.50[38.1]
Request Info
1.00 25.5 1.00[25.5]
1.00 25.5 1.00[25.5]
1.12 28.5 1.12[28.5]
Or
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
part ML28P part number: number: ML28P right right hand hand
[email protected] [email protected]
265 265
Hinges
SIERRA PACIFIC ENGINEERING AND PRODUCTS
C
Plastic PlasticHinges Hinges al include304SS 304SS pins pins unless specified I include unless otherwise otherwise specified studs and/or and/or inserts inserts some include include threaded threaded studs I some that are are either either brass brass or or nickel nickel plated that plated steel steel includeUV UV stabilizers I include stabilizers
Plastic Plastic Hinges Hinges Through Through Page Page 269 269
Fastening Fastening Options Options
COUNTERSUNK COUNTERSUNK HOLES HOLES
COUNTERBORE COUNTERBORE HOLES HOLES
•
4.72 [120.0] [120.0] Plastic Plastic Lift-off Lift-off Hinges 4.72 Hinges Part Part Number Number .55 14.0
.55 14.0 .55 23.5 14.0 .55[14.0] .55 14.0 .93 TYP. .55 14.0
.65 16.5
.65 16.5
.65 16.5 .65 16.5 .65[16.5]
.93 23.5 .93[23.5] .93 23.5TYP. .93 23.5 TYP.
TYP. .93 23.5TYP. TYP. 16.5 .17 4.4 x 8.92 .351.65 0.351[8.92] .17 4.4 x .22 [5.5] HIGH PIN PIN .93 23.5 .17 .22 4.4[5.5] x .17 4.4 x HIGH (2) STUDS TYP. 4.72 120.0 (2).17 STUDS .22 [5.5] HIGH .22 4.4[5.5] x HIGH 4.72 120.04.72[ 4.72 120.0 20.0] (2) STUDS (2) HIGH STUDS .22 [5.5] 4.72 120.0 (2) STUDS .93 23.5 .93 23.5 .17 x 0.17[4.4] A 4.4 81 TYP. .93 23.5TYP. .93 23.5.22 .22 [5.5] [5.5] HIGH HIGH 4.72 120.0 TYP. STUDS (2) STUDS .93 23.5TYP. (2) .93[23.5] TYP. TYP.
'01
.55 14.0
4.72 120.0
' 00
OP' .:.d.
B
M5 M5 xx .47 .47 [12.0] [12.0] long long threaded studs threaded studs
200 200
110 110
H3527P
M5 M5 threaded inserts inserts threaded
M5 M5 threaded inserts inserts threaded
200 200
110 110
H3528P
M5 M5 threaded inserts inserts threaded
M5 M5 xx .47 .47 [12.0] [12.0] long long threaded studs threaded studs
200 200
110 110
B H3527P B.351 8.92 PIN.351 8.92 PIN .351 8.92 B PIN H3528P
plated finish finish plated
includes mounting mounting screws screws I includes
A
Part Part Number Number
C.) e
C.`
Radial AxialWorking Working RadialWorking Working Axial Load (lb) Load (lb) Load (Ib) Load (Ib)
B B
M5 .47 [12.0] [12.0] long M5 xx.47 long threaded studs threaded studs
.351 8.92 A PIN steelpin pinwith withyellow yellow zinc zinc I Asteel A A
.93 23.5 TYP.
Plastic Plastic Hinges Hinges
B
A A
THREADED THREADED STUD STUD
H3526P H3526P
.65 16.5
B
THREADED THREADED INSERT INSERT
loop 1.89 48.0 ] 1.89[48.0
A
D E
B C
1.08 27.5 1.08[27.5]
.34 8.8
B C D BCD
EE
Axial Radial Axial Radial Working Working Working Working Load(Ib) (lb) Load Load(lb) (Ib) Load
FF
H3518P H3518P
2.01 1.13 .41 1.14 2.01 1.13 .41 1.14 [51.0] [28.6] [28.6] [10.4] [10.4] [29.0] [29.0] [51.0]
M4 fastener M4 fastener M4 fastener M4 fastener countersinks countersinks countersinks countersinks
200 200
150 150
H3519P H3519P
2.32 1.44 .41 138 1.38 232 1.44 .41 [59.0] [36.6] [36.6] [10.4] [10.4] [35.0] [35.0] [59.0]
M4 fastener M4 fastener countersinks countersinks
M6 fastener M6 fastener countersinks countersinks
200 200
170 170
H3520P H3520P
2.46 1.16 .49 2.46 1.16 .49 [67.5] [29.5] [29.5] [12.5] [12.5] [67.5]
1.57 1.57 [40.0] [40.0]
M4 fastener M6 fastener M4 fastener M6 fastener countersinks countersinks countersinks countersinks
200 200
150 150
H3521P H3521P
1.69 .81 .41 .81 .41 1.69 [43.0] [20.6] [20.6] [10.4] [10.4] [43.0]
.95 .95 [24.0] [24.0]
M4 fastener M4 fastener countersinks countersinks
M4 fastener M4 fastener countersinks countersinks
200 200
170 170
H3522P H3522P
2.32 1.16 .49 .49 232 1.16 [59.0] [29.5 [29.5 [12.5] [12.5] [59.0]
1.34 134 [34.0] [34.0]
M6 fastener M6 fastener M6 fastener M6 fastener countersinks countersinks countersinks countersinks
200 200
150 150
H3523P H3523P
2.99 1.50 .59 1.81 M6 fastener M6 fastener 2.99 1.50 .59 1.81 M6 fastener M6 fastener [76.0] [38.0] [38.0] [15.0] [15.0] [46.0] [46.0] countersinks countersinks countersinks countersinks [76.0]
200 200
150 150
.236 6.00
F
A A
Plastic Plastic Hinge Hinge with with Counterbores Counterbores Part Part Number Number
Radial Load (Ib) (lb) Radial Working Working Load
Axial Working Load (Ib) (lb) Axial Working Load
200 200
120 120
H3504P H3504P 1.97 50.0 1.84504]
.39 10.0 .39[10.0]
2.72 69.0 272[580]
1.77 43.0 45.0 ] 174
M6 FASTENER M8 COUNTERBORE U (4) PLACES
1.18 30.0 ] 1.18[304
.236 6.00 O.23e[emo]
Plastic Plastic Hinges Hinges A
4t B
H
Part Part Number Number
G
D
F
E
C
A
B
D
C
A A
B B
C D CD
Download 3DmoDELs @ @www.spep.com www.spep.com Download
FF
G G
H H
Axial Radial Axial Radial Working Working Working Working Load(Ib) (lb) Load Load(lb) (Ib) Load
H3500P H3500P
.98 .98 .59 .59 .59 .98 .98 .59 [25.0] [25.0] [25.0] [15.0] [15.0] [15.0] [15.0] [25.0]
.12 .12 [3.0] [3.0]
M3 fastener M3 fastener countersinks countersinks
M3 fastener M3 fastener countersinks countersinks
Ø.118 0.118 [3.00] [3.00]
50 50
40 40
H3501P H3501P
.98 1.18 .59 .71 1.18 .59 .71 .98 [25.0] [30.0] [30.0] [15.0] [15.0] [18.0] [18.0] [25.0]
.12 .12 [3.0] [3.0]
M4 fastener M4 fastener countersinks countersinks
M4 fastener M4 fastener countersinks countersinks
Ø.118 0.118 [3.00] [3.00]
50 50
35 35
H3502P HH3502P G
1.58 1.58 .98 .98 1.58 1.58 .98 .98 [40.0] [40.0] [40.0] [25.0] [25.0] [25.0] [25.0] [40.0]
.20 .20 [5.0] [5.0]
M5 fastener M5 fastener countersinks countersinks
M5 fastener M5 fastener countersinks countersinks
Ø.157 0.157 [4.00] [4.00]
120 120
70 70
H3503P H3503P
1.97 1.97 1.18 1.18 1.97 1.97 1.18 1.18 [50.0] [50.0] [50.0] [30.0] [30.0] [30.0] [30.0] [50.0]
.24 .24 [6.0] [6.0]
M6 fastener M6 fastener countersinks countersinks
M6 fastener M6 fastener countersinks countersinks
Ø.236 0.236 [6.00] [6.00]
150 150
90 90
H3503P-01 H3503P-01 E
1.97 1.97 1.18 1.18 .24 1.97 1.97 1.18 1.18 .24 [50.0] [50.0] [50.0] [30.0] [30.0] [30.0] [30.0] [6.0] [6.0] [50.0]
x .59 [15.0] [15.0] M6 x .59 [15.0] [15.0] M6 M6 x.59 M6 x.59 Ø.236 0.236 long long threaded threaded long long threaded threaded [6.00] [6.00] studs studs studs studs
150 150
100 100
F
Request Info
266 266
EE
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Industrial Hardware Hardware Hinges and
Axial Axial Working Working
Radial Radial Working Working Load (lb) Load (Ib)
Load (lb) Load (Ib)
1.38 1.38 [35.0] [35.0]
150 150
80 80
.49 [12.5] .49 [12.5]
1.57 1.57 [40.0] [40.0]
150 150
65 65
[13.0] .51 [13.0] .51
1.69 1.69 [43.0] [43.0]
150 150
60 60
1.42 1.42 [36.0] [36.0]
[13.0] .51 [13.0] .51
1.81 1.81 [46.0] [46.0]
150 150
65 65
1.77 1.77 [45.0] [45.0]
.78 [19.7] .78 [19.7]
1.99 1.99 [50.6] [50.6]
150 150
60 60
1.42 1.42 [36.0] [36.0]
[13.0] .51 [13.0] .51
1.89 1.89 [48.0] [48.0]
150 150
60 60
Part Part Number Number
A A
H3512P H3512P
2.34 2.34 [59.5] [59.5]
1.18 1.18 [30.0] [30.0]
.49 [12.5] [12.5] .49
H3513P H3513P
2.58 2.58 [65.5] [65.5]
1.16 1.16 [29.5] [29.5]
H3514P H3514P
2.95 2.95 [75.0] [75.0]
1.26 1.26 [32.0] [32.0]
H3515P H3515P
2.83 [72.0] 2.83 [72.0]
H3516P H3516P
3.54 3.54 [90.0] [90.0]
H3517P H3517P
3.19 3.19 [81.0] [81.0]
D D
C C
B
.32 8.2
1.57 40.0 [-1.57[40.0]
Hinges
Plastic Hinges Plastic Hinges
D
A B
C M6 M5 FASTENER FASTENER COUNTERSINK UNTERSINK (2) (2) PLACES PLACES
.394 10.00
material information for material 266 for I refer information page 266 topage referto
Plastic Hinges Plastic Hinges Part Part Number Number
Axial /Wall' Radial Radial Working Working Working Working (lb) Load (Ib) Load (lb) Load (Ib) Load
A A
B B
M5 fastener M5 fastener counterbores counterbores
fastener M5 fastener M5 counterbores counterbores
250 250
150 150
[14.0] long .55 [14.0] M6 xx .55 M6 long studs threaded threaded studs
[14.0] long .55 [14.0] M6 xx .55 M6 long studs threaded threaded studs
250 250
150 150
inserts threadedinserts H3511P-02 threaded H3511P-02 M6M6
[14.0] long .55 [14.0] M6 long M6 xx .55 studs threaded studs threaded
250 250
150 150
[14.0] long .55 [14.0] M6 xx .55 M6 long studs threaded threaded studs
250 250
150 150
inserts threaded inserts M6 threaded M6
250 250
150 150
inserts threadedinserts inserts M6M6 threadedinserts H3511P-05 M6M6 threaded threaded H3511P-05
250 250
150 150
H3511P H3511P
H3511P-01 H3511P-01
H3511P-03 H3511P-03
fastener M5 M5 fastener counterbores counterbores
H3511P-04 H3511P-04
fastener M5 fastener M5 counterbores counterbores
.157 4.00 0.157[4.00]
1.93 49.0
B
1.18 30.0
1.89 48.0
A
11.0 .43 .43[11.0]
1.20 30.5
for material material information information ►refer refer to to page page 266 266 for
Hinge OM' Hinge Part No. Part No.
H3539P H3539P
Material Material
Finish Fin
plastic plastic
black matte matte black
64.0 2.52 [64.0] 2.52 40.0 1.57 1.57[40.0] CENT. CENT.
I refer information material information for material 266 for page 266 topage referto
64.0 2.52 64.0] 2.52
HOLE WITH .259 6.57 HOLE 0.259[6.57] WM-I C'SINK [13.50] xx 82 CSINK .532 [13.50] 0.532 PLACES (4) PLACES (4)
1.57 40.0 1'57 40-01 CENT. CENT. .201 5.10 0201E52101 PLATED ZINC PLATED C.D.S, C.D.S, ZINC KNURLED PIN KNURLED PIN
.53 13.5 .53[13.5]
Plastic Beveled Plastic Beveled Hinges Hinges Radial Radial Workin Working Load (lb) Load (lb
Axial Working Load (lb)
fastener M4 fastener M4 counterbores counterbores
100 100
100 100
M4 long [12.0] long .47 [12.0] M4 xx .47 studs threaded threaded studs
[12.0] long .47 [12.0] M4 long M4 xx .47 studs threaded threaded studs
100 100
100 100
fastener M4 fastener M4 counterbores counterbores
[12.0] long .47 [12.0] M4 xx .47 M4 long studs threaded threaded studs
100 100
100 100
inserts threadedinserts inserts M4M4 H3506P-05 M4M4 threaded threaded threadedinserts H3506P-05
100 100
100 100
Part Part Number Number
A A
B B
fastener M4 fastener M4 counterbores counterbores
H3506P-01 H3506P-01 H3506P-03 H3506P-03
H3506P H3506P
1P 111
1.18 30.0
.098 2.50 B
1.77 45.0
.59 15.0
1.18 30.0
A
A9[1z5]
.49 12.5
for material material information information ►refer refer to to page page 266 266 for
Request Info
1-800-453-1692 www.aboveboardelectronics.com
800.433.5554 To PlaceOrder: Order: t 800.433.5554 To Place
[email protected] [email protected]
267
Hinges
SIERRA PACIFIC
ENGINEERING AND PRODUCTS
Plastic Beveled Beveled Hinge Hinge with with Counterbores Counterbores Plastic 1.89 48.0 1.89[48.0]
(lb) Load (Ib) WorkingLoad AxialWorking RadialWorking WorkingLoad Load(lb) (Ib) Axial Radial
Part Part Number Number
.197 5.00
H3507P H3507P
100 100
200 200
information material information for material 266for page266 to page / refer refer to 1.83 46.5 1.83[46.5]
2.76 70.0 2.76[70.0]
M5 FASTENER FASTENER M5 UNTERBORE COUNTERBORE (4) PLACES (4) PLACES
24.0 .94 .94[24.0]
.79 20.0
Plastic Partial Partial Beveled Beveled Hinges Hinges Plastic 48.0 1.89 48.0]-1 r-1.59[
A
.94 24.0 .94[24.0]
1.59 40.5 1.59[4o.5]
24.0 .94 .94[24.0]
M5 FASTENER FASTENER M5 COUNTERBORE UNTERBORE PLACES (2) PLACES (2)
A A
Radial Working Working Radial (lb) Load Load (Ib)
Axial Working Working Axial Load Load (lb) (lb)
H3508P-03 H3508P-03
M5 M5 xx .51 .51 [13.0] [13.0] long threaded threaded long studs studs
200 200
100 100
H3508P-04 H35010-04
fastener M5 fastener M5 inserts inserts
200 200
100 100
Part Part Number Number
.197 5.00 0.197[5.00]
.79 20.0 .1/[2o.o]
information material informatioi for material 266 for ►refer refer to to page page 266
Plastic Partial Partial Beveled Beveled Hinges Hinges Plastic
.098 2.50
1.18 30.0
B
1.26 32.0
A
.59 15.0
A A
B
H3505P-01 H3505P-01
M4 .47 [12.0] [12.0] long long M4 xx .47 threaded threaded studs studs
.47 [12.0] [12.0] long long M3 xx .47 M3 threaded threaded studs studs
100 100
100 100
H3505P-02 H3505P-02
M4 threaded threaded M4 inserts inserts
[12.0] long M3 x.47 long x .47 [12.0] M3 threaded studs threaded studs
100 100
100 100
H3505P-03 H3505P-03
fastener M4 M4 fastener counterbores counterbores
[12.0] long x .47 [12.0] M3 x.47 M3 long threaded studs threaded studs
100 100
100 100
H3505P-04 H3505P-04
M4 fastener fastener M4 counterbores counterbores
M3 M3 threaded threaded inserts inserts
100 100
100 100
H3505P-05 H3505P-05
M4 threaded threaded M4 inserts inserts
M3 threaded threaded M3 inserts inserts
100 100
100 100
1.00 25.5
.49 12.5
.60 15.3
Working AxialWorking RadialWorking Working Axial Radial (lb) Load (lb) Load (Ib) Load Load (Ib)
Part Part Number Number
information material information for material I refer 266for page266 to page refer to
Plastic 90° 90° Angle Angle Hinges Hinges Plastic 1.18 30.0 1.18[30.0]
A A
B
H3509P-01 H3509P-01
long [12.0] long x .47 [12.0] M3 x.47 M3 threaded threaded studs studs
[12.0] long long x .47 [12.0] M3 x.47 M3 threaded threaded studs studs
100 100
100 100
H3509P-02 H3509P-02
fastener inserts M3 M3 fastener inserts
M3 xx.47 long [12.0] long .47 [12.0] M3 threaded studs threaded studs
100 100
100 100
H3509P-05 H3509P-05
fastener inserts M3 M3 fastener inserts
fastener inserts M3 fastener inserts M3
100 100
100 100
2.50 098[2.50] 0..098
rh
B
19.44] .76 76[19
LI] .59 15.0
[1:1
A
.28 7.0 .28[7.0].1
Working AxialWorking Radial RadialWorking Working Axial (lb) Load Load (Ib) (lb) Load Load (Ib)
Part Part Number Number
information material information formaterial 266for page266 topage referto / refer
Plastic 90° 90° Angle Angle Hinges Hinges Plastic .197 5.00 0.197[5.00]
48.5 1.91 [48.5] 1R1
A A
B
H3510P-01 H3510P-01
long [13.0] long x .51 [13.0] M5 x.51 M5 threaded threaded studs studs
long [13.0] long x .51 [13.0] M5 x.51 M5 threaded threaded studs studs
200 200
200 200
H3510P-02 H3510P-02
threaded M5 threaded M5 inserts inserts
[13.0] long x .51 [13.0] M5 M5 x.51 long threaded studs threaded studs
200 200
200 200
H3510P-05 H3510P-05
M5 threaded threaded M5 inserts inserts
M5 threaded threaded M5 inserts inserts
200 200
200 200
B
29.55] 1.16 1.16[29
A .94 24.0 .96i24-01
268 268
Download 3DmoDEL3 @ @www.spep.com www.spep.com Download
.4.3[11.0 .43 11.0
Working AxialWorking RadialWorking Working Axial Radial (lb) Load (lb) Load Load (Ib) Load (Ib)
Part Part Number Number
information material information for material 266for page266 to page / refer refer to
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part Part Number Number
H3530P H3530P
Load (lb) Load (Ib)
150 150
25 25
Working Working
Pin Pin Material Finish Material and and Finish
.63 16.0 ] .63[16.0
2.40 60.9 2.40[60.9]
.236 6.00 0.236[6.00]
steel w/ w/ yellow yellow zinc steel zinc plated finish plated finish
.89 22.5 .89[22.5]
1.08 27.5
.37 37[99.5 5]
refer to to page page266 266for for material material information information I refer .79 20.0 .79[2o.o]
Hinges
Plastic Plastic Take-apart Take-apart Hinge Hinge Axial Axial
Radial Radial Working Working Load (lb) Load (Ib)
.236 6.00 0.236[6.00]
-
1.18 30.0 1.18[30.0]
Plastic Plastic Take-apart Take-apart Hinge Hinge Part Part Number Number
H3531P H3531P
Axial Axial
Radial Radial Working Working Load (lb) Load (Ib)
Working Working Load (lb) Load (Ib)
120 120
150 150
Pin Pin Material Finish Material and and Finish
.63 16.0 .63[16.0]
•
2.40 60.9 2.40[60.9]
.236 6.00 0.236[6.00]
steel w/ w/ yellow yellow zinc steel zinc
.59 15.0 .59[15.0]
plated finish plated finish
.87 22.0
I refer refer to to page page266 266for for material material information information 1.20 30.5
.73 18.5 .73[18.5]
Plastic Plastic Take-apart Take-apart Hinge Hinge Part Part Number ber
H3532P H3532P
Axial Axial
Radial Radial Working Working Load (lb) Load (Ib)
Load (lb) Load (Ib)
120 120
150 150
Working Working
Pin Pin Material Finish Material and and Finish
.63 16.0
steel w/ w/ yellow yellow zinc steel zinc
2.40 60.9 2.40[60.9
.236 6.00 0.236[6.00]
.41 10.5
plated finish plated finish
▪
.69 17.5
refer to to page page266 266for for material material information information I refer 1.04 26.5
.73 18.5
•
Part Part Number Number
H2229P H2229P
Material Material
Finish Finish
plastic plastic
black black
41,
Pin Pin II steel, zinc steel, zinc
3.15 80.0 3.15[80.0]
plated plated
1.97 50.0 1.97[50.0]
.24 6.0
h—.24[6.o]
refer to to page page266 266for for material material information information I refer 1.34 34.0 1.34[34.0]
Plastic Plastic Hinge Hinge with with Countersunk Countersunk Holes Holes
.83 21.0 .83[21.0]
1.85 47.0 1.85[47.0] 2.80 71.0 2.80[ 71.0]
.354 9.00 HOLE HOLE WI W/ 0.354[9.00] .669[17.00) [17.00] x x 90 0.669 90° (3) (3) PLCS. PLCS.
1.57 40.0 1.57[40.0]
.315 [8.00) [8.00] 0.315 KNURLED KNURLED PIN PIN
41:0 Plastic PlasticHinge Hingewith withPlain Plain Holes Holes Part Part Number Number
Material Material glass glass
H2230P H2230P
reinforced reinforced plastic plastic
Finish Finish
Pin Pin
black black textured textured
steel, steel,
2.45 62.2 .89 22.5 CENT.
.276 7.00 0.276[7.00] KNURLED PIN
.75 19.0 75 [19.0]
zinc plated zinc plated
refer to to page page266 266for for material material information information I refer 1.43 36.4 1.43[36.4] 3.69 93.6 x69[93.6]
.98 25.0 .68[7.6]
1.00 25.5 CENT.
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.209 5.30 TYP.
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
269 269
Hinges
'‘ERIIII PACIFICEm-
---
Plastic Hinge Pin Construction Plastic Hinge with with Double Double Pin Construction
C
Part No. Part No.
1.59 [40.5] 40.5 1.59
.157 [4.00] 4.00 HOLE HOLE WITH WITH 0.157 .315 [8.00] [8.00] xx 106 C'SINK 0.315 106' CSINK (6) PLACES (6) PLACES
Material Material
Finish Finish
plastic plastic
white white
H2284WTP H2284WTP
1.16 29.5 1.16[29.5] CENT.
steel, zinc zinc plated plated pins I steel, pins double hinged hinged I double
ri0; II 1.02 26.0 36.0 1.42 36 0] 1.0226 0]
e
CENT. CENT
A
A
an
1 e.45 11.5
2.90 .114 [2.90] THK.
.079 2.00 PI PIN 0.079[2.00] SECTION A-A SECTION A-A
Plastic Hinges Screw Covers Covers Plastic Hinges with with Screw Part No. Part No. C E
F
G (4) PLCS.
A A
B B
C C
D D
E E
F F
G G
2.28 1.14 2.36 1.42 1.42 .82 Ø .256 2.28 1.14 236 1.42 1.42 .82 0 .256 H2232P-01 H2232P-01 [58.0] [6.50] [58.0] [29.0] [29.0] [60.0] [60.0] [36.0] [36.0] [36.0] [36.0] [20.8] [20.8] [6.50]
H2232P-02 H2232P-02
1.61 .81 1.69 .98 .95 .57 Ø .177 1.61 .81 57 0.177 1.69 .98 55 [41.0] [4.50] [41.0] [20.5] [20.5] [43.0] [43.0] [25.0] [25.0] [24.0] [24.0] [14.5] [14.5] [4.50]
material: plastic plastic I material: finish: black black I finish: A
D B
BOTTOM VIEW VIEW Borrow
Plastic Door Positioning Positioning Hinge Hinge Plastic Door
END VIEW END VIEW
qv Part Part Number Number
H2231P H2231 P .71 [18.0] 18.0 .71
1.34 [34.0] 34.0 1.34
.41 10.3
A
2.24 [57.0] 57.0 2.24
Material Material
Finish
Pin
plastic plastic
black black textured textured
steel, steel, zinc plated zinc plated
holdsdoor dooropen openatat150° 150° and and 180° 180° I holds
150°
1.34 34.0 1.34 [34.0]
.402 10.20 A AfJ
1.97 50.0 ..-1.97 [50.0]
.36 9.1
TOP VIEW TOP11EW
.22 5.5 .20 5.0 01 2 [: (4) PLACES PLACES (4)
OPERATING ANGLE ANGLE OPERATING
REAR VIEW REAR VIEW
SECTION A-A SECTION A-A
Aluminum Adjustable Adjustable Friction Friction Hinge Aluminum Hinge it
.244 6.20 HOLE HOLE 0.244[6.20]
65.0 2.56 [65.0] 2.56 C
.47 [12.0]x [12.0] x90° 90 C'SINK C'SINK 0.47 (2) (2) PLACES PLACES
Part Number 4MM HEX 4MM HEX ADJUSTING SCREW ADJUSTING SCREW
H2217 H2217
Material Material
Finish Finish
aluminum aluminum
brushed brushed
►304SS 304SSadjusting adjusting screw screw
1.49 37.8 1.49 37.8] 2.17 55.0 2.17[55.0]
C CfJ
1.89 [48.0] 48.0 1.89 BOTTOM VIEW BOTTOM VIEW
270 270
Download @www.spep.com www.spep.com Download31)moDELs @
.402 [10.20] .256 [6.50] [6.50] OBROUND OBROUND .402 [10.20] xx.256 WITH .480 x WITH .480 [12.20] [12.20] xx .335 .335[8.50] [8.50]x .067 [1.70] [1.70] DEEP DEEP C'BORE .067 C'BORE (2) PLACES PLACES (2)
.18 4.5 .18[4.5] SECTION C-C C-C SECTION
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
B
A
164° 156° G OG (4) C'BORES (4) CHORES
A
D
F OF HOLES _{(4) (4) HOLES
162° 154° lgi:
A
Part Number Part Number
E
TOP VIEW TOP VIEW
SECTION A-A SECTOR A-A
FH100BKP FH100BKP
black black
FH100WTP FH100WTP
white white
FH150BKP FH150BKP
black black
FH150WTP FH150WTP
white white
FH150BKP100 FH150BKP1
black black
FH200BKP FH200BKP
black black
FH200WTP FH200WTP
white white
FH150BKP10* • ALL ALLOTHER OTHER FH150BKP10
FH200
ONLY ONLY
Dimensions Dimensions
Color Color
165° 157°
118° 110°
A C
Hinges
Plastic Adjustable Plastic Adjustable Friction Friction Hinges Hinges
FH10BKP
PLASTIC. HINGES PLASTIC HINGES
Max Prevailing Prevailing Max Torque Torque
Radial Tensile Tensile Radial Load Strength Load Strength
Axial Load Axial Load Strength Strength
Recommended Recommended Screw Screw Size Size
A A
B B
C C
D D
EE
FF
G G
1.45 1.45 [36.8] [36.8]
1.78 1.78 [45.2] [45.2]
1.25 1.25 [31.8] [31.8]
1.00 1.00 [25.4] [25.4]
.52 .52 [13.2] [13.2]
Ø.167 0.167 [4.24] [4.24]
Ø.365 0365 [9.27] [9.27]
7 in 7 in lb. lb.
working 100 working80 80 lb. lb. working 100lb.lb. working ultimate ultimate200 200 lb. lb. ultimate 400 400lb. lb. ultimate
2.04 2.04 [51.8] [51.8]
2.00 2.00 [50.8] [50.8]
1.34 134 [34.0] [34.0]
1.34 134 [34.0] [34.0]
.70 .70 [17.8] [17.8]
Ø.205 0.205 [5.21] [5.21]
Ø.475 0.475 [12.07] [12.07]
25 in 25 in lb. lb.
working 100 100 lb. working lb. ultimate 575 lb. ultimate 575 lb.
2.255 2.255 [57.2] [57.2]
2.70 2.70 [68.6] [68.6]
1.88 1.88 [47.8] [47.8]
1.50 1.50 [38.1] [38.1]
.78 .78 [19.8] [19.8]
Ø.265 0.265 [6.73] [6.73]
Ø.575 0.575 [14.61] [14.61]
35 in 35 in lb. lb.
working 150 working120 120 lb. lb. 1/4" working 150lb. lb. working 1/4!' round round or or ultimate ultimate 450 450 lb. panhead headscrew screw ultimate 700 700lb.lb. ultimate lb. pan
working 100 100 lb. working lb. ultimate 400 400 lb. ultimate lb.
#8 #8 round round head head screw screw #10 #10 round round or or pan pan head head screw screw
based FH150BKP10 has has based on on aa 180° 180°flat flatsurface surfaceinstallation, installation,part part number number FH150BKP10 an operating angle rotation rotationof of110°/118°. 110°/118°. All All other other hinges hinges are are 154°/162°. 154°/162°. an operating angle
plasticleaves leaveswith with300 300series series stainless stainless steel I plastic steel components components hingetension tensioncan canbe beset set by by adjusting adjusting screw screw I hinge finish:lightly lightlytextured textured matte matte finish finish I finish:
Plastic Hinge Plastic Hinge (non-friction) (non-friction) Part Number
ow
Color Color
H1100BK H1100BK
black black
H1100WT H11 0OWT
white white
Dimensions Dimensions A
B
C
D D
E E
F F
G
Radial Tensile Tensile Radial Load Strength Load Strength
Axial Load Axial Load Strength Strength
Recommended Recommended Screw Size Screw Size
1.45 1.45 [36.8] [36.8]
1.78 1.78 [45.2] [45.2]
1.25 1.25 [31.8] [31.8]
1.00 1.00 [25.4] [25.4]
.52 .52 [13.2] [13.2]
Ø.167 0.167 [4.24] [4.24]
Ø.365 0365 [9.27] [9.27]
working 100 lb. working 100 lb. ultimate 400 lb. ultimate 400 lb.
working 80 80 lb. working lb. ultimate 200 200 lb. ultimate lb.
#8 #8 round round head screw screw head
plasticleaves leaveswith with300 300series series stainless stainless steel I plastic steel components components finish:lightly lightlytextured textured matte matte finish finish I finish:
Plastic Adjustable Plastic Adjustable Friction Friction Hinges Hinges Part Part Number Number
Material Material
Finish Finish
FH100BKP50 FH100BKP50
plastic plastic
matte black matte black
adjustmentscrew screwand and nut:304SS nut:304SS with I adjustment with mill mill finish finish
.30 7.5 HEX HEX x x .30[7.5] C'BORE .12 [3.0] [3.0] C'BORE (4) PLACES PLACES (4)
.173 4.40 0.173[4.40] (4) HOLES HOLES (4)
Part Part Number Number
FH200BKP50 FH200BKP50
Material Material' plastic plastic
•••.- .24 [6.0] 6.0
1.69 [43.0] 43.0 1.69
Finish Finish
.98 [25.0] 25.0 .98
1.24 [31.5] 31.5 1.24
2.50 [63.5] 63.5 2.50
matte black matte black
36.0 1.42 [36.0] 1.42
15 .6 [15] .6
.260 [6.60] 6.60 0.260 (4) (4) HOLES HOLES
r
.20 [5.2] 5.2 .20
adjustmentscrew screw and and nut: I adjustment nut: 304SS 304SS with with mill finish finish mill 1.50 38.9] 38.0 1.501
1.87 47.6 1.87 [47.6]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
2.26 [57.5] 57.5 2.26
.76 [19.4] 19.4 .76
To Place 800.433.5554 111.
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
271 271
Hinges
Medium Die Cast Cast Zinc Medium Die Zinc Friction Friction Hinges Hinges
EW F, CU
Features Features
C
material: die die cast cast zinc zinc I material: life cycle: cycle: 25,000 25,000 cycles I life cycles within within ±20% ±20% of specification of torque torque specification mill finish finish parts I mill parts are are non-stock non-stock
radialworking working load: load: 35 35 lbs. lbs. I radial radial ultimate ultimate load: load: 675 675 lbs. lbs. I radial axial working working load: load: 35 35 lbs. I axial lbs. axial ultimate ultimate load:360 load: 360 lbs. lbs. I axial
Symmetric Torque Torque with Symmetric with Plain Plain Holes Holes 1.50 [38.0] 38.0 1.50
.39 [10.0] 10.0 .39
Finish
A.111 A
Mill Mill
1.57 40.0] 40.0 1.57 1.10 [28.0] 28.0 1.10
A
.177 [4.50] 4.50 0.177 (4) HOLES HOLES (4)
.70 [17.8] 17.8 .70 TOP VIEW VIEW TOP
.12 [3.0] 3.0 .12 SECTION A-A SECTION A-A
Black Black
PIP Torque (in LB)
CT001 CT001
CT001BK CT001 BK
CT002 CT002
CT002BK CTOO2BK
8.0 [0.9] [0.9] 8.0
CT003 CT003
CT003BK CT003BK
12.4 [1.4] 12.4 [1.4]
CT004 CT004
CT004BK CTOO4BK
15.9 [1.8] 15.9 [1.8]
CT005 CT005
CT005BK CTOO5BK
20.4 20.4 [2.3] [23]
CT006 CT006
CT006BK CTOO6BK
23.9 [2.7] 23.9 [2.7]
0.0 0.0 [0.0] [0.0]
Asymmetric Torque Torque with Asymmetric with Plain Plain Holes Holes Finish nish .50 12.7
Mill Mill
3
no for no need need for any adjustment any adjustment
1.34 34.0
C
.18 4.5
SECTION A-A
ROTATION CLOSING ROTATION
OPENING OPENING ROTATION
Black Black
Closing Torque Closing Torque (in LB) LB) (in
Opening Torque Opening Torque (in LB) LB) (in 7.1 [0.8] 7.1 [0.8]
CT010 CT010
CT010BK CTO1OBK
12.4 [1.4] [1.4] 12.4
CT020 CT020
CT020BK CTO2OBK
15.9 [1.8] [1.8] 15.9
9.7 [1.1] 9.7 [1.1]
CT030 CT030
CT030BK CTO3OBK
20.4 20.4 [2.3] [23]
12.4 [1.4] [1.4] 12.4
CT040 CT040
CT040BK CTO4OBK
23.9 [2.7] 23.9 [2.7]
14.2 [1.6] [1.6] 14.2
CT050 CT050
CT050BK CTO5OBK
30.1 [3.4] [3.4] 30.1
17.7 [2.0] [2.0] 17.7
CT060 CT060
CT060BK CTO6OBK
7.1 [0.8] 7.1 [0.8]
12.4 [1.4] 12.4 [1.4]
CT070 CT070
CT070BK CTO7OBK
9.7 [1.1] 9.7 [1.1]
15.9 [1.8] [1.8] 15.9
CT080 CT080
CT080BK CTO8OBK
12.4 [1.4] [1.4] 12.4
20.4 20.4 [2.3] [23]
CT090 CT090
CT090BK CTO9OBK
14.2 [1.6] [1.6] 14.2
23.9 [2.7] 23.9 [2.7]
CT095 CT095
CT095BK CT095BK
17.7 [2.0] [2.0] 17.7
30.1 [3.4] [3.4] 30.1
Symmetric Torque Symmetric Torque with with Countersunk Countersunk Holes Holes Finish ppinish
.39 10.0 .39 [10.0]
1.50 38.0 A
Mill
40.0 1.57 [40.0] 1.57 1.10 [28.0] 28.0 1.10
4.50 HOLE HOLEWITH WITH .177[4.50] 0.177 .362[9.20] [9.20] xx 90° 90 C'SINK C'SINK 0.362 (4) PLACES (4) PLACES
A
.70 17.8 .70 [17.8] TOP VIEW VIEW TOP
.12 3.0 .12 [3.0] SECTION A-A SECTION A-A
Torque Torque (in LB) LB) (in
Black Black
CT101 CT101
CT101BK CT101BK
CT102 CT102
CT102BK CT102BK
8.0 [0.9] [0.9] 8.0
CT103 CT103
CT103BK CT103BK
12.4 [1.4] 12.4 [1.4]
CT104 CT104
CT104BK CT104BK
15.9 [1.8] 15.9 [1.8]
CT105 CT105
CT105BK CT105BK
20.4 20.4 [2.3] [23]
CT106 CT106
CT106BK CT106BK
23.9 [2.7] 23.9 [2.7]
0.0 0.0 [0.0] [0.0]
Asymmetric Torque Asymmetric Torque with with Countersunk Countersunk Holes Holes Finish Finish Mill Mill
.50 12.7
3
/
C
---;N
S' 1.34 34.0
no for no need need for any adjustment any adjustment
\
& .18 4.5
SECTION A-A
272 272
N-tCLOSING ROTATION
Download 3DmoDELs @ @www.spep.com www.spep.com Download
C
'_.,/
OPENING OPENING ROTATION
Black Black
Closing Torque Closing Torque (in LB) LB) (in
Opening Torque Opening Torque (in LB) LB) (in 7.1 [0.8] 7.1 [0.8]
CT110 CT110
CT110BK CT110BK
12.4 [1.4] [1.4] 12.4
CT120 CT120
CT120BK CT120BK
15.9 [1.8] [1.8] 15.9
9.7 [1.1] 9.7 [1.1]
CT130 CT130
CT130BK CT130BK
20.4 20.4 [2.3] [23]
12.4 [1.4] [1.4] 12.4
CT140 CT140
CT140BK CT140BK
23.9 [2.7] 23.9 [2.7]
14.2 [1.6] [1.6] 14.2
CT150 CT150
CT150BK CT150BK
30.1 [3.4] [3.4] 30.1
17.7 [2.0] [2.0] 17.7
CT160 CT160
CT160BK CT160BK
7.1 [0.8] 7.1 [0.8]
12.4 [1.4] [1.4] 12.4
CT170 CT170
CT170BK CT170BK
9.7 [1.1] 9.7 [1.1]
15.9 [1.8] 15.9 [1.8]
CT180 CT180
CT180BK CT180BK
12.4 [1.4] [1.4] 12.4
20.4 20.4 [2.3] [23]
CT190 CT190
CT190BK CT190BK
14.2 [1.6] [1.6] 14.2
23.9 [2.7] 23.9 [2.7]
CT195 CT195
CT195BK CT195BK
17.7 [2.0] [2.0] 17.7
30.1 [3.4] [3.4] 30.1
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Large Die Cast Zinc Large Die Cast Zinc Friction Friction Hinges Hinges
Features res material: die die cast cast zinc ►material: zinc life cycle: cycle: 25,000 ►life 25,000 cycles cycleswithin within ±20% ±20% of torque specification of torque specification mill finish finish parts parts are are non-stock ►mill non-stock
load: 45 45 lbs. lbs. ►radial radial working working load: load: 2470 2470 lbs. ►radial radial ultimate ultimate load: lbs. axial working load: 45 45 lbs. ►axial working load: lbs. axial ultimate load: 630 630 lbs. ►axial ultimate load: lbs.
2.00 [50.8] 50.8 2.00
Mill Mill
Torque Torque Black Black
(in LB) LB) (in
CT501 CT501
CT501BK CT501BK
CT502 CT502
CT502BK CT502BK
8.0 [0.9] 8.0 [0.9]
CT503 CT503
CT503BK CT503BK
15.9 15.9 [1.8] [1.8]
CT504 CT504
CT504BK CT504BK
20.4 20.4 [2.3] [2.3]
CT505 CT505
12.7 .50 [12.7]
A A
Symmetric Torque Plain Holes Symmetric Torque with with Plain Holes Finish Finish
CT505BK CT505BK
34.0 1.34 [34.0]
57.1 2.25 [57.1]
0.0 [0.0] 0.0 [0.0]
A A
.205 [5.20] 5.20 0.205 (4) HOLES
30.1 30.1 [3.4] [3.4]
1.34 [34.0] 34.0 1.34
.18 4.5 .18[4.5]
2.00 50.8
CT510 CT510
Black Black
Closing Torque Closing Torque (in LB) LB) (in
Opening Torque Torque Opening (in LB) LB) (in
CT510BK CT510BK
20.4 [2.3] 20.4 [2.3]
CT520BK CT520BK
30.1 [3.4] 30.1 [3.4]
CT530 CT530
CT530BK CT530BK
39.8 [4.5] 39.8 [4.5]
23.9 [2.7] 23.9 [2.7]
CT540 CT540
CT540BK CT540BK
12.4 [1.4] 12.4 [1.4]
20.4 [2.3] 20.4 [2.3]
CT550 CT550
CT550BK .205CT550BK 5.20 (4) HOLES
17.7 [2.0] 17.7 [2.0]
30.1 [3.4] 30.1 [3.4]
23.9 [2.7] 23.9 [2.7]
39.8 [4.5] 39.8 [4.5]
CT520 CT520
CT560 CT560
2.25 57.1
CT560BK CT560BK
Request Info
OPENING ROTATION
.50 12.7
Asymmetric Torque Plain Asymmetric Torque with with Plain Holes A Holes Finish Finish
CLOSING ROTATION
SECTION A-A SECTION A-A
TOP VIEW VIEW TOP
Mill Mill
Hinges
EW FROM T AMILY
no need no need for for any any adjustment adjustment
12.4 [1.4] 12.4 [1.4]
1.34 34.0
A
1.34 34.0
TOP VIEW
17.7 [2.0] 17.7 [2.0]
C
.18 4.5
SECTION A-A
CLOSING ROTATION ROTATION CLOSING
-_'/
OPENING ROTATION OPENING ROTATION
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
273 273
Hinges
Small Steel Friction Friction Hinge Small Stainless Stainless Steel Hinge Part Part Number Number
FH010SS FH01055
C
1.10 28.0
Material Material
Finish Finish
304SS 304SS
barrel barrel polished polished
AL
Torque Range Torque Range 3.0 - 3.9 3.9 in in lbs. 3.0lbs.
provides constant constant resistance resistance to to keep keep hinge hinge open open at at any any angle I provides angle .118 3.00 45.118[3.00]
.169 4.30 0.169[4.30] (4)HOLES HOLES (4)
.89 22.5
1.34 34.0
.26 6.5 .79 20.0
.047 1.20 .047[1.20]-4.-
Large Friction Hinge Large Stainless Stainless Steel Steel Friction Hinge A
4.30 0 .169 .169[4.30] (5) HOLES HOLES (5)
B
D G F E
Part Torque Range Range PartNumber Number Torque
C
H
A A
B
C
D D
EE
F
G G
H H
FH0150SS FH015055
6.1 6.1 -- 7.9 7.9 in in lbs. lbs.
1.57 [40.0] [40.0] 1.57
1.38 [35.0] [35.0] 1.38
1.181 [30.00] [30.00] 1.181
.984 [25.00] [25.00] .984
.000 [0.00] [0.00] .000
.20 [5.0] [5.0] .20
Ø.157 [4.00] 0.157 [4.00]
.047 [1.20] [1.20] .047
FH0125SS FH012555
12.1 --15.6 15.6 in in lbs. 12.1 lbs.
1.97 [50.0] [50.0] 1.97
1.67 [42.5] [42.5] 1.67
1.575 [40.00] [40.00] 1.575
1.043 [26.50] [26.50] 1.043
.118 [3.00] [3.00] .118
.32 [8.00] [8.00] .32
Ø.236 [6.00] 0.236 [6.00]
.079 [2.00] [2.00] .079
material: 304SS 304SS I material: finish: barrel barrel polished I finish: polished
provides constant constant resistance resistance to to keep keep hinge hinge open open at at any any angle I provides angle
Small Small Plastic Plastic Friction Friction Hinges Hinges
EW FF CI AMILY
1.00 25.4
.50 12.7 ] .50[12T (4) PLACES
.41 10.5 .41[10.5
.20 5.0 .20[5.01 (4) PLACES
FRONT VIEW FRONT
Color Color
Material Material
Finish Finish
FH050BK FH050BK
black black
FH050WT FHO5OWT
white white
glass glass reinforced reinforced plastic plastic
lightly lightly textured textured
.59 15.0
/MI 1.20 30.5
Part Part Number Number
.80 20.3 .80[20.3]
radial tensile tensile strength strengthworking workingload: load: 80 80 lbs. lbs. I radial axial strength strengthworking workingload: load: 80 80 lbs. lbs. I axial includes (4) (4) self-tapping I includes self-tapping mounting mounting nuts nuts
REAR VIEW VIEW REAR
RIGHT SIDE RIGHT SIDE VIEW VIEW
Mini Mini Plastic Plastic Friction Friction Hinges Hinges A
---.11. !t 6.,,
6... -..../ part FHOO5WT part no. no. FH005WT
Torque UNI Torque Dim A Dim A LBF-FT LBF-FT(N-m) (N-m)
Material Material
Finish Finish
FH005BK FHOO5BK
plastic plastic
black black
.059 ± ± .015 .015 [.08 [.08 ±.02] .059 ±.02]
FH005WT FHOO5WT
plastic plastic
white white
FH006BK FHOO6BK
plastic plastic
black black
FH006WT FHOO6WT
plastic plastic
white white
Part Part Number Number
0.79 [20.0] 0.79 [20.0]
.047 [12.0] [12.0] .047
.059 ± ± .015 .015 [.08 [.08 ±.02] .059 ±.02]
0.79 [20.0] 0.79 [20.0]
.047 [12.0] [12.0] .047
.103 ±.037 [.14 ±.05] .103 ±.037 [.14 ±.05]
1.18 [30.0] [30.0] 1.18
0.87 [22.0] [22.0] 0.87
.103 ±.037 [.14 ±.05] .103 ±.037 [.14 ±.05]
1.18 [30.0] [30.0] 1.18
0.87 [22.0] [22.0] 0.87
DIM A DIM B CENT. A A
part part no. no. FH006BK FHOO6BK
.079 2.00 PI PIN 0.079[200] .98 25.0
.63 16.0 CENT. .094 2.40 HOLE HOLE WITH WITH 0.094[2.40] A
.165 [4.20] [4.20] xx 90 • C'BORE CSORE 0.165 (4) PLACES PLACES
.079[2.00] 2.00 [._.079
THK.
SECTION A-A SECTION AA
Request Info
274 274
Download 31:Immo @ Download @www.spep.com www.spep.com
Dim B Dim B
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and and Industrial Industrial Hardware Hardware
B B N A
Hinges
Plastic Plastic Case Case Friction Friction Hinges Hinges
C F
G (2) HOLES
E
D
VIEW TOP VIEW TOP K K
JJ
M
-C31
H H 6.5 .26 .243[6.5]_,..1 REF. REF.
.079 2.00 THK. THK.
L L OBROUNDS (2) OBROUNDS (2)
VIEW RIGHT SIDE RIGHT SIDE VIEW
VIEW FRONT FRONT VIEW
(in lbs.) Torque (In Part lbs.) Part Number Number Torque
H H
A A
B B
J
K
L
M
N
2.54 2.54 [64.5] [64.5]
.591 .591 [15.00] [15.00]
.591 .591 [15.00] [15.00]
.51 .165 .591 .96 .165 .51 .96 .591 [13.0] [4.20] [13.0] [15.00] [4.20] [24.5] [15.00] [24.5]
.98 .98 [25.0] [25.0]
1.30 1.30 [33.0] [33.0]
[5.2] xx .17 .21 [5.2] .21 .17 [4.2] [4.2]
.16 .16 [4.0] [4.0]
.39 39 [10.0] [10.0]
G F EE M.%
D D
C IOW
H
FH122-01 FH122-01
12.1 12.1 ±1.8 ±1.8
.79 .79 [20.0] [20.0]
FH122-02 FH122-02
9.5 ±1.3 9.5 ±13
.71 .71 [18.0] [18.0]
2.40 2.40 [61.0] [61.0]
.512 .512 [13.00] [13.00]
.551 .551 [14.00] [14.00]
.91 .91 [23.0] [23.0]
.43 .165 .551 .165 .43 .551 [11.0] [4.20] [11.0] [14.00] [14.00] [4.20]
.94 .94 [24.0] [24.0]
1.20 1.20 [30.5] [30.5]
[5.2] xx .17 .21 [5.2] .21 .17 [4.2] [4.2]
.16 .16 [4.0] [4.0]
.39 39 [10.0] [10.0]
FH122-03 FH122-03
6.1 6.1 ±0.9 ±0.9
.59 .59 [15.0] [15.0]
2.15 2.15 [54.5] [54.5]
.433 .433 [11.00] [11.00]
.512 .512 [13.00] [13.00]
.39 .126 .512 .81 .512 .126 .39 .81 [10.0] [3.20] [10.0] [13.00] [3.20] [20.5] [13.00] [20.5]
.83 .83 [21.0] [21.0]
1.06 1.06 [27.0] [27.0]
[4.2] xx .13 [3.2] .17 [4.2] .17 [3.2]
.12 .12 [3.0] [3.0]
.31 31 [8.0] [8.0]
FH122-04 FH122-04
3.0 3.0 ±0.4 ±0.4
.43 .43 [11.0] [11.0]
1.85 1.85 [47.0] [47.0]
.295 .295 [7.50] [7.50]
.394 .394 [10.00] [10.00]
.31 .126 .394 .75 .126 .31 .75 394 [8.0] [3.20] [8.0] [10.00] [19.0] [10.00] [19.0] [3.20]
.71 .71 [18.0] [18.0]
.89 .89 [22.5] [22.5]
[4.2] xx .13 .17 [4.2] .17 .13 [3.2] [3.2]
.12 .12 [3.0] [3.0]
.31 31 [8.0] [8.0]
FH134-01 FH134-01
12.1 ±1.8 12.1 ±1.8
.79 .79 [20.0] [20.0]
2.63 2.63 [66.9] [66.9]
.591 .591 [15.00] [15.00]
.591 .591 [15.00] [15.00]
.51 .165 .591 .96 .165 .51 .96 .591 [13.0] [4.20] [13.0] [15.00] [4.20] [24.5] [15.00] [24.5]
.98 .98 [25.0] [25.0]
1.30 130 [33.0] [33.0]
[5.2] xx .17 .21 [5.2] .21 .17 [4.2] [4.2]
.16 .16 [4.0] [4.0]
.39 39 [10.0] [10.0]
FH134-02 FH134-02
9.5 9.5 ±1.3 ±1.3
.71 .71 [18.0] [18.0]
2.48 2.48 [63.1] [63.1]
.512 .512 [13.00] [13.00]
.551 .551 [14.00] [14.00]
.43 .165 .551 .91 .165 .43 .91 .551 [11.0] [4.20] [11.0] [14.00] [4.20] [23.0] [14.00] [23.0]
.94 .94 [24.0] [24.0]
1.20 1.20 [30.5] [30.5]
[5.2] xx .17 .21 [5.2] .21 .17 [4.2] [4.2]
.16 .16 [4.0] [4.0]
.39 39 [10.0] [10.0]
FH134-03 FH134-03
6.1 6.1 ±0.9 ±0.9
.59 .59 [15.0] [15.0]
2.22 2.22 [56.3] [563]
.433 .433 [11.00] [11.00]
.512 .512 [13.00] [13.00]
.39 .126 .512 .81 .39 .512 .126 .81 [10.0] [3.20] [10.0] [13.00] [3.20] [20.5] [13.00] [20.5]
.83 .83 [21.0] [21.0]
1.06 1.06 [27.0] [27.0]
[4.2] xx .13 .17 [4.2] .17 .13 [3.2] [3.2]
.12 .12 [3.0] [3.0]
.31 31 [8.0] [8.0]
FH134-04 FH134-04
3.0 ±0.4 3.0 ±0.4
.43 .43 [11.0] [11.0]
1.92 1.92 [48.8] [48.8]
.295 .295 [7.50] [7.50]
.394 .394 [10.00] [10.00]
.31 .126 .394 .75 .126 .31 .75 394 [8.0] [3.20] [8.0] [10.00] [19.0] [10.00] [19.0] [3.20]
.71 .71 [18.0] [18.0]
.89 .89 [22.5] [22.5]
[4.2] xx .13 .17 [4.2] .17 .13 [3.2] [3.2]
.12 .12 [3.0] [3.0]
.31 31 [8.0] [8.0]
material: black black plastic plastic case case with with stainless stainless steel steel shaft shaft and and bracket bracket ►material:
Aluminum Case Aluminum Case Friction Friction Hinges Hinges B B N A
C F
G (2) HOLES
E
D
TOP VIEW TOP K K
J
li
M H
H OH
LL OBROUNDS (2) OBROUNDS (2)
.30 7.5 REF. REF. VIEW FRONT FRONT VIEW
D D
C C
B A AB
(in lbs.) Torque (In Part lbs.) Part Number Number Torque
2.00 .079 .079[2.00] THK. THK. VIEW RIGHT SIDE RIGHT SIDE VIEW
EE
FF
G G
H H
J
K K
LL
M M
N N .39 39 [10.0] [10.0]
FH144-01 FH144-01
12.1 ±1.8 12.1 ±1.8
.79 .79 [20.0] [20.0]
2.54 2.54 [64.5] [64.5]
.591 591 [15.00] [15.00]
.591 .591 [15.00] [15.00]
.96 .96 [24.5] [24.5]
.591 591 [15.00] [15.00]
.165 .165 [4.20] [4.20]
.51 .51 [13.0] [13.0]
.98 .98 [25.0] [25.0]
1.30 1.30 [33.0] [33.0]
[5.2] xx .17 .21 [5.2] .21 .17 [4.2] [4.2]
.16 .16 [4.0] [4.0]
FH144-02 FH144-02
9.5 9.5 ±1.3 ±13
.71 .71 [18.0] [18.0]
2.40 2.40 [61.0] [61.0]
.512 .512 [13.00] [13.00]
.551 .551 [14.00] [14.00]
.91 .91 [23.0] [23.0]
.551 .551 [14.00] [14.00]
.165 .165 [4.20] [4.20]
.43 .43 [11.0] [11.0]
.94 .94 [24.0] [24.0]
1.20 1.20 [30.5] [30.5]
[5.2] xx .17 .21 [5.2] .21 .17 [4.2] [4.2]
.16 .16 [4.0] [4.0]
.39 39 [10.0] [10.0]
FH144-03 FH144-03
6.1 6.1 ±0.9 ±0.9
.59 .59 [15.0] [15.0]
2.15 2.15 [54.5] [54.5]
.433 .433 [11.00] [11.00]
.512 .512 [13.00] [13.00]
.81 .81 [20.5] [20.5]
.512 .512 [13.00] [13.00]
.126 .126 [3.20] [3.20]
.39 .39 [10.0] [10.0]
.83 .83 [21.0] [21.0]
.12 .12
[27.0] [27.0]
.31 31 [8.0] [8.0]
1.06 1.06
[4.2] xx .13 .17 [4.2] .17 .13 [3.2] [3.2]
[3.0] [3.0]
stainless steel with stainless case with aluminum case material: aluminum I material: steel shaft shaft and and bracket bracket Request Info
1-800-453-1692 www.aboveboardelectronics.com
[email protected] 800.433.5554IM
[email protected] To Place To PlaceOrder: Orden t 800.4335554
275
----
Hinges
'‘ERIIII PACIFY
---
Stamped Stainless Steel Steel Flush Flush Hinges Stamped Stainless Hinges Part Number Part Number
2.08 52.8
patent patent pending pending
Material Material
Finish Finish
1001SS 100155
304SS 304SS
electropolished electropolished
1001SSBK 100155BK
304SS 304SS
matte black black powder coat matte powder coat
304SS pin ►304SS pin and and washers washers
2.00 50.8
3.25 82.6 2.56[65.1] 2.56 65.1 3.25[82.6]
1.38 34.9 1.90[48.3] 1.90 48.3 1.38[34.9]
.219 5.56 HOLE HOLEW(TH WITH 0219[5.56]
.65 16.6
.375 [9.53 [ 9.53 ]] xx 82 0375 82°C'SINK MINK (6) PLCS. (6) PLCS.
5.40 137.1 5.40[137.1] 4.58 116.3 4.58[1163] .118 118[33.00 00 ] THK. THK .50 12.7 .50[12.7]
u
Stamped Steel Flush Hinges StampedStainless Stainless Steel Flush Hinges j Part Number Part Number
Material Material
II
Finish Finish
1005SS 100555
304SS 304SS
electropolished electropolished
1005SSBK 100555BK
304SS 304SS
black black e-coat e-coat
304SS pin ►304SS pin and and washers washers 2.08 52.8
2.00 50.8
patented patented 3.25 82.6 2.56[65.1 2.56 65.1 3.25[82.6]
1.38 34.9 1.90[48.3] 1.90 48.3 1.38[34.9]
.219 5.6 HOLE HOLE W(TH WITH 0.219[5.6]
.65 16.6
.375 [9.53 [ 9.53 ]] x x 82 C'SINK 0.375 82' CSINK (6) PLCS. PLCS. (6)
5.40 137.1 5.40[137.1] 4.58 116.3 4.58[1163] .118 3.00 THK. .118[3.00] THK u.
.50 12.7 50[12.7]
Stamped Stainless Steel Stamped Stainless Steel Flush Flush Hinge Hinge Part Number
1008SS 100855
Material Material
Finish Finish
304SS 304SS
passivated passivated and and polished polished
►304SS 304SSpin pin and and washers washers
.84 21.4 .84[21.4]
2.49 63.1 2.49[83.1]
3.61 91.7 3.61[91.7] 2.35 59.8
4.25 108.0 3.23 81.9 2.11[53.8 2.11 53.6 4.25[ 08.0] 3.23[81.9]
.274[ 8.98 6.96 (HOLE ]HOLE WITH WITH 0.274( .465[ 11.81 ] xx 82 {6.485[11.81 82°C'SINK MINK (2) PLCS. PLCS. (2)
1.88 47.6 1.88[47.8]
.78 19.9 .78[19.9]
.318 8.07 HOLE HOLE WITH WITH 0 .318[8.07] .475 [[ 12.07 SINK 0 .475 12.07 ]] xx 82 82° C' C. SINK (7) (7) PLCS. PLCS.
2.50 63.5 2.50[83.5]
10.24 260.1 10.24[280.1] .500 12.70 0.500[12.70] PIN PIN
8.96 227.6 8.98[227.8]
.89 22.6 .89[22.8] .091 2.30 t .091[2.30 THK. THK.
276
Download www.spep.com Download3DmoDELs @ @ www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Industrial Hardware Hardware Hinges and
Heavy Strap Strap Hinges Hinges Heavy
Light Strap Strap Hinges Hinges Light
No. Screw No. of of Screw Size Holes Size Holes
Closed Closed Width Width
Material Material Thickness Thickness
HSH4091 HSH4091
4.00 4.00 [101.6] [101.6]
.091 [2.30] .091 [230]
6 6
#8 #8
#6 #6
HSH5091 HSH5091
5.00 5.00 [127.0] [127.0]
.091 [2.30] .091 [230]
8 8
#10 #10
#5 #5
HSH6091 H51-16091
5.80 5.80 [147.3] [147.3]
.091 [2.30] .091 [230]
8 8
#10 #10
6 6
#10 #10
HSH6014SS* HSH601455*•
5.91 [150.0] 5.91 [150.0]
[3.00] .118 [3.00] .118
8 8
#16 #16
6 6
#6 #6
HSH6012 • HSH6012
5.94 5.94 [151.0] [151.0]
[3.00] .118 [3.00] .118
8 8
#10 #10
[1.50] .059 [1.50] .059
6 6
#6 #6
HSH8012SS* HSH801255*•
7.99 7.99 [203.0] [203.0]
[3.50] .138 [3.50] .138
8 8
#10 #10
LSH5063 1.51-15063
[1.80] .071 [1.80] 5.00 [127.0] 5.00 [127.0] .071
8 8
#6 #6
H51-18118 HSH8118
[204.7] 8.06 [204.7] 8.06
[2.59] .102 [2.59] .102
8 8
#10 #10
LSH6063 LSH 6063
[1.50] .060 [1.50] 6.00 6.00 [152.4] [152.4] .060
8
#6 #6
H51-11012 • HSH1012
9.80 9.80 [249.0] [249.0]
[3.00] .118 [3.00] .118
8 8
#14 #14
LSH8079 LSH 8079
[2.00] .079 [2.00] 7.94 7.94 [201.7] [201.7] .079
8 8
#8 #8
HSH1216 • HSH1216
[305.0] 12.01 12.01 [305.0]
[4.00] .157 [4.00] .157
10 10
#12 #12
#14 #14
these hinges steel material material with with tumbled tumbled stainless steel are stainless hinges are ►** these finish deburred finish deburred •= = new new part part
Screw No. No. of of Screw Holes Holes Size Size
Closed Closed Width Width
Material Material Thickness Thickness
LSH2055 1.51-12055
2.00 2.00 [50.8] [50.8]
[1.40] .055 .055 [1.40]
6 6
#5 #5
LSH3060 • LSH3060
2.76 2.76 [70.0] [70.0]
[1.50] .059 [1.50] .059
6 6
LSH3055 LSH3055
[74.7] 2.94 2.94 [74.7]
[1.40] .055 [1.40] .055
6 6
LSH4060 • 1.5114060
[95.0] 3.74 [95.0] 3.74
.059 [1.50] .059 [150]
LSH4055 1-51-14055
3.88 3.88 [98.6] [98.6]
[1.40] .055 .055 [1.40]
LSH4160 • LSH4160
4.04 [102.5] 4.04 [102.5]
Part Part Number Number
[2.00] .079 [2.00] [205.0] .079 8.07[205.0] LSH8180SS* • 8.07 LSH818055*
6 6
are stainless these hinges hinges are stainless steel steel material material with with tumbled tumbled * these ►* finish deburred finish deburred •= = new new part part
Part Part Number Number
Hinges
Zinc Plated Steel, Zinc Plated Strap Strap Hinges Hinges Steel,
VI
60 sed
dt wi
h
clo
T-Hinges Zinc Plated Steel, Zinc Steel, Plated T-Hinges Heavy T-Hinges T-Hinges Heavy
Light T-Hinges T-Hinges Light Part Part Number Number
Closed Closed Width Width
Screw No. of Material No. of Screw Material Size Holes Size Thickness Holes Thickness
Screw No. of of Screw Material No. Material Size Holes Size Thickness Holes Thickness
Closed Closed Width Width
Part Part Number Number
1.89 1.89 [48.0] [48.0]
[1.20] .047 [1.20] .047
66
#4 #4
HTH4091 HTH4091
4.00 4.00 [101.6] [101.6]
[2.30] .091 [2.30] .091
66
#7 #7
LTH2055 LTH2055
2.00 2.00 [50.8] [50.8]
[1.40] .055 [1.40] .055
6 6
#6 #6
HTH4191SS* • HTH419155*
4.02 [102.0] 4.02 [102.0]
[2.30] .091 [2.30] .091
66
#10 #10
LTH3055 LTH3055
[76.2] 3.00 3.00 [76.2]
[1.40] .055 [1.40] .055
6 6
#6 #6
HTH5091 HTH5091
5.00 [127.0] [127.0] 5.00
[2.30] .091 [2.30] .091
8 8
#9 #9
LTH4055 LTH4055
4.00 [101.6] 4.00 [101.6]
[1.40] .055 [1.40] .055
6 6
#6 #6
HTH6091 HTH6091
5.85 [148.6] 5.85 [148.6]
.091 [2.30] .091 [230]
8 8
#10 #10
LTH5071 • LTH5071
5.00 5.00 [127.0] [127.0]
[1.80] .071 [1.80] .071
77
#8 #8
HTH6012 HTH6012 •
5.91 5.91 [150.0] [150.0]
[3.00] .118 [3.00] .118
8 8
#10 #10
LTH5063 LTH5063
5.20 [132.1] [132.1] 5.20
[1.65] .065 [1.65] .065
77
#6 #6
5.91 [150.0] [150.0] HTH60125501* HTH6012SS01* • 5.91
[3.00] .118 [3.00] .118
8 8
#10 #10
[136.0] 5.35 [136.0] LTH5579SS* • 5.35 LTH557955*
[2.00] .079 [2.00] .079
6 6
#14 #14
HTH6198 • HTH6198
[153.7] 6.05 [153.7] 6.05
[2.50] .098 [2.50] .098
8 8
#14 #14
LTH6063 LTH6063
6.00 6.00 [152.4] [152.4]
[1.60] .063 [1.60] .063
77
#7 #7
7.99 [203.0] [203.0] HTH8012SS01* HTH80125501* • 7.99
[3.00] .118 [3.00] .118
99
#10 #10
LTH8079 • LTH8079
7.68 7.68 [195.0] [195.0]
[2.00] .079 [2.00] .079
77
#10 #10
HTH8188 HTH8188
8.00 [203.2] 8.00 [203.2]
[2.60] .102 [2.60] .102
99
#10 #10
LTH9579 • LTH9579
9.21 9.21 [234.0] [234.0]
[2.00] .079 [2.00] .079
8 8
#10 #10
HTH8012 HTH8012 •
[205.0] 8.07 [205.0] 8.07
[3.00] .118 [3.00] .118
9 9
#10 #10
LTH1071 LTH1071 •
[1.80] .071 [1.80] 10.16 10.16 [258.0] [258.0] .071
66
#14 #14
HTH1098BK • HTH1098BK
9.57 [243.0] 9.57 [243.0]
[2.50] .098 [2.50] .098
8 8
#11 #11
HTH1012 • HTH1012
9.69 9.69 [246.0] [246.0]
[3.00] .118 [3.00] .118
99
#14 #14
LTH2047 • LTH2047
stainless steel are stainless these hinges hinges are steel material material with with tumbled tumbled ** these finish deburred finish deburred •= = new new part part
HTH1014• HTH1014
[3.50] .138 [3.50] 9.95 9.95 [252.80] [252.80] .138
99
#12 #12
HTH1212 • HTH1212
[3.00] .118 [3.00] [293.0] .118 11.54 [293.0] 11.54
10 10
#14 #14
HTH1211 • HTH1211
[2.80] .110 [2.80] 11.81 11.81 [300.0] [300.0] .110
8 8
#14 #14
HTH1411 HTH1411 •
[2.80] .110 [2.80] [350.0] .110 13.78 13.78 [350.0]
77
#11 #11
ed los
dth wi
c
these hinges steel material material with with tumbled tumbled stainless steel are stainless hinges are ►** these finish deburred finish deburred •= = new new part part
T-Hinge Heavy T-Hinge Steel Heavy Steel Part Number Part Number
HTH6094 HTH6094
Material Material
Finish Finish
steel steel
plated zinc plated zinc
►press press fit fit steel steel pins pinson on both both ends ends nylon bearings bearings increase increase life lifeexpectancy expectancy and and ensures ensures ►nylon smooth, quiet smooth, quiet operation operation
WITH HOLE WITH .280 7.11 HOLE 0 .280[7.11] C'SINK x 82 .375[ 9.53 ] x 82' C'SINK 0.375[
(8) (B) PLCS. PLCS.
0 108.5 4.27 [108.5]
0 NYLON BEARING BEARING NYLON (2) PLCS. PLCS. (2) VIEW TOP VIEW 1.55 39.4 1.55[39.4]
2.60 .102 .102[2.60] THK. Request Info
1-800-453-1692 www.aboveboardelectronics.com
145.7 5.74 [145.7]
L
3--
FRONT VIEW VIEW FRONT
To PlaceOrder: Order To Place
800.433.5554 800.433.5554
[email protected] [email protected]
277 27
ilr•W BIM NEM l'alrin1
Hinges
niENGINEERING AND PRODUCTS
tot
Heavy T-Hinges T-Hinges Heavy Part Number Part Number
C
Material Material
Finish Finish
HTH3590 HTH3590
steel steel
zinc plated zinc plated
HTH3590BK HTH3590BK
steel steel
zinc plated zinc plated then then black black powder powder coated semi-gloss coated semi-gloss
HTH3590SS HTH359055
304SS 304SS
deburred and deburred and passivated passivated
.280 7.11] HOLE HOLE WITH WITH 0.280[7.11 .375[ 9.53 ] x 82 C'SINK C'SINK 0.375[9.53]x82° (9) PLCS. PLCS. (9)
►304SS 304SSpin pin and and washers washers nylonbearings bearingsincrease increase life life expectancy expectancy and I nylon and ensures ensures smooth, smooth, quiet quiet operation operation
4.27 108.5 4.27[108.5]
NYLON BEARING BEARING NYLON (2) PLCS. PLCS. (2) TOP VIEW TOP VIEW
1.55 39.4 1.55[39.4]
3.35 85.0 ] 3.35[85.0
.102 2.60 .102[2.60 THK. THK.
FRONT VIEW FRONT VIEW
Stainless Stainless Steel Steel Offset Offset Strap Strap Hinge Hinge Product Number Product Number .50 12.7 .50[12.7
1.99 50.5
1.58 40.1 sigao.1]
1.06 27.0
SQ. HOLES .210[ 5.33 ] SO. (4) PLCS.
H1043 H1043
Material Material
Finish Finish
304SS 304SS
electropolished electropolished
►304SS 304SSpin pin and and washers washers
.88 22.2 1.50[38.1] 1.50 38.1 .88[22.2]
.80 20.2 .80[20.2]
2.20 56.0 2.20[58.0 .118 3.00 THK. 1-.118[380]TM(
.73 18.4 .73[18.4]
.42 10.7 .42[1o.7] 9.53 PIN PIN 0 .375 375[953]
Stainless Stainless Steel Steel Offset Offset Strap Strap Hinge Hinge Product Number Product Number
H1081SS H108155 2.56 [65.0] 65.0 2.56
Material Material
Finish Finish
304SS 304SS
electropolished electropolished
304SS pin ►304SS pin and and washers washers
.50 12.6 .50[12.6]
.210 [5.33] [5.33] SQ. SQ. HOLES HOLES .210 (4) PLACES PLACES (4)
g
1+] 1.99 50.5 1.99[50.5]
i 22.2 .88 [2Z2] 1.50 38.1 .1] CENT. 1.50[ TYP. TYP.
[
.31 [8.0] 8.0 .31
3.19 81.0 3.19[81.0] .118 [3.00] 3.00 .118 THK. F THK
.56 [14.1] 14.1 .56 .375 9.53 PIN PIN 0.375[9.53] SPUN ON ON BOTH BOTH ENDS ENDS SPUN
278 278
Download @www.spep.com www.spep.com Download31)moDELs @
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware Hingec
Short Leaf Leaf Short Part Part Number Number
Description Length Description Length
Type of of Washers Washers
Finish Finish
H1032LH H1032LH
left left hand hand
3.28 3.28 [83.2] [83.2]
Belleville Belleville
zinc zinc plated plated
H1032RH H1032RH
right right hand hand
3.28 3.28 [83.2] [83.2]
Belleville Belleville
zinc zinc plated plated
H1032LH-01 H1032LH-01
left left hand hand
3.28 3. 28 [83.2] [83.2]
Belleville Belleville
mill mill
H1032RH-01 H1032RH-01
right right hand hand
3.28 3'28 [83.2] [83.2]
Belleville Belleville
mill mill
H1032LH-03 H1032LH-03
left left hand hand
3.28 3.28 [83.2] [83.2]
flat with flat with bushings bushings
mill mill
H1032RH-03 H1032RH-03
right right hand hand
3.28 3.28 [83.2] [83.2]
flat with flat with bushings bushings
mill mill
Hinges
Steel Strap Hinges with Grease Grease Fitting Steel Strap Hinges with Fitting
left left hand hand shown shown
.500[ 12.70 12.70 ]] BOLT 0 .500[ BOLT WITH 1/2-13 1/2-13 THREAD THREAD WITH
2.26 57.4 7.4] 226L
3.16 80.4 9.16 30.4]
a \ (2) FLAT FLAT (2) WASHERS WASHERS
(2) (2) BELLVILLE BELLVILLE WASHERS WASHERS
CD
BOLT BOLT
C )
GREASE FITTING GREASE FITTING
(2) (2) SLEEVE SLEEVE BUSHINGS BUSHINGS
LOCK NUT LOCK NUT .63 15.9
BASE BASE BOLT 5 BOLT )%
LENGTH LENGTH
1 /1 1e GREASE GREASE FITTING FITTING
GREASE7A GREASE FITTING FITTING
LEAF LEAF
NUT NUT
LEAF LEAF
BASE BASE
NUT NUT
2.50 63.5 1.69 42.9
FLAT WASHERS WASHERS WITH FLAT WITH SLEEVE BUSHINGS BUSHINGS SLEEVE
BELLVILLE WASHERS WASHERS BELLVILLE
7.80 .307 [7.80] .307 THK. THK.
1.25 31.8 -.I 1.25[31.8]
Long Leaf Long Leaf Part Part Number Number
Description Length Description Length
Type of of Washers Washers
Finish Finish
H1032LH-10 H1032LH-10
left left hand hand
5.25 5.25 [133.4] [133.4]
Belleville Belleville
mill mill
H1032RH-10 H1032RH-10
right right hand hand
5.25 5.25 [133.4] [133.4]
Belleville Belleville
mill mill left left hand hand shown shown
Steel Strap Hinges with Grease Grease Fitting Steel Strap Hinges with Fitting Part Part No. No.
Description Description
Type of Type of Washers Washers
Finish Finish
H1032LH-02 H1032LH-02
left hand hand left
Belleville Belleville
mill mill
H1032RH-02 H1032RH-02
right right hand hand
Belleville Belleville
mill mill
LOCK NUT GREASE FITTING
3.16 80.4 3.16[80.4]
.63 15.9 A33[15.9]
2.26 57.4 226[57.4]
1/2"-13 THO. THD. BOLT 1/T-13
3.44 87.3 344[87.3]
right right hand hand shown shown 2.50 63.5 2.50[63.5] 1.69 42.9 1.68[422] .307 7.80 .307[7.80]
1.25 31.8 1.25[31.8]
right right hand hand shown shown Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
279 279
Hinges
Ar""C ENGINEERING
AND PRODUCTS
Steel Steel Strap Strap Hinges Hinges Description Description
Material Material
Finish Finish
H1017 H1017
Part Number Part Number
left left hand hand
steel steel
zinc plated zinc plated
H1018 H1018
right right hand hand
steel steel
zinc plated zinc plated
8.27 210.1 8.27[210.1] 4.29 109.0 4/9[1094]
2.95 75.0 2.95[]54]
left shown left hand hand shown 5.20 132.0 4.04[102.7] 4.04 102.7 5.20[132.0]
1.42 36.0 236[604] 2.36 60.0 1A2[364]
.409 10.40 HOLE HOLE 0.409[10.40] (2) PLCS. PLCS. (2)
1.26 32.0 1.26[32.0]
.327 8.30 HOLE HOLE 0.327[8.30] (3) PLCS. PLCS. (3)
1.81 46.0 11346.o]
55[14.0 ]
.55 14.0 .157 4.00 L.157[4.00] THK. 'MK
.236 6.00 .23e[e.00] THK. THK
'!
Stainless Stainless Steel Steel Strap Strap Hinges Hinges Part Part Number Number
formed leaf with withc'sunk c’sunk holes holes formed leaf part part no. no. H1020 H1020 part part no. no. H1021 H1021
A A
B B
C 111.
D
E E
F F
G G
H1020 H1020
1.00 1.00 [25.4] [25.4]
.120 .120 [3.05] [3.05]
.062 .062 [1.57] [1.57]
Ø.196 [5.00] [5.00] 0.196 with 82° c'sink c’sink with 82°
Ø.196 [5.00] with 0.196 [5.00] with 82° c’sink 82° c'sink
.63 .63 [16.0] [16.0]
3.13 3.13 [79.5] [79.5]
H1021 H1021
1.31 131 [33.3] [333]
.180 .180 [4.57] [4.57]
.062 .062 [1.57] [1.57]
Ø.275 [7.00] [7.00] 0.275 with 82° c'sink c’sink with 82°
Ø.275 [7.00] with 0.275 [7.00] with 82° c’sink 82° c'sink
.81 .81 [20.6] [20.6]
3.19 3.19 [81.0] [81.0]
H1021-01 H1021-01
1.31 131 [33.3] [333]
.180 .180 [4.57] [4.57]
flush flush
Ø.275 [7.00] [7.00] 0.275 with no no c'sink c’sink with
Ø.275 [7.00] with 0.275 [7.00] with no c'sink c’sink no
.81 .81 [20.6] [20.6]
3.19 3.19 [81.0] [81.0]
material: 304SS 304SS I material: brushed finish finish I brushed D
F
G
2.00 50.8 2.00[5013]
1.63 41.3 163[41.3]
flat standard holes holes flat leaf leaf with with standard part part no. no.H1021-01 H1021-01
1.25 31.8 2.00[50.8] 2.00 50.8 1.25[3113]
4.00 101.6 4.00[101.13] 1.63 41.3 1133[41.3] E
.375 9.53 PIN PIN WITH WITH 35.375[9.53] BOTH ENOS ENDS SPUN BOTH SPUN
A
5.50 139.7 540[1341]
C C
B
Stainless Stainless Steel Steel Strap Strap Hinges Hinges Part Part Number Number
Finish Finish
Material Material
A A
B B
Holes Holes
H2035 H2035
polished polished
304SS 304SS
2.00 [50.8] 2.00 [50.8]
2.17 2.17 [55.1] [55.1]
.252 [6.40] [6.40] dia. .252 dia.
H2035-01 H2035-01
polished polished
304SS 304SS
1.25 1.25 [31.8] [31.8]
2.92 2.92 [74.2] [74.2]
.264 [6.70] [6.70] sq. sq. .264
round holes round holes part part no. no. H2035 H2035 .94 23.8 .94 [23.8]
2.69 68.3 2.69[68.3]
-AA
B B
1
1.73 44.1 1.73 [44. 1] CENT. CENT.
2° 2° TYP. TVP. 1.48 37.5 1.48 [37.5]
HOLES HOLES (4) PLACES PLACES (4)
square holes square holes part part no. no.H2035-01 H2035-01
280
Download Download OMourLs @@www.spep.com www.spep.com
.315 8.00 PIN PIN 0.315[8.00] .37 9.3 .37 [9.3]
1.41[35.7] 35.7 - 1.41 4.84 [123.0] 123.0 4.84 3.50 THK. THK. .138 .138 [3.50]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware
Part Part Number Number
Description Description
Finish Finish
H1034SS-01 H103455-01
flush strap flush strap
mirror mirror hand hand polish polish
H1034SS-02 H103455-02
offset strap offset strap
mirror mirror hand hand polish polish
material: 304SS 304SS I material: nylon bushings bushings I nylon
.266 6.76 (4) HOLES
3.00 76.2
1.50 38.1 CENT.
Hinges
Stainless Steel Strap Strap Hinges Stainless Steel Hinges
offset strap 1.25 31.8 .34 8.6
1.63 41.4 TOP VIEW VIEW TOP 1.50 38.1 1.50[38.1] .098 [2.50] 2.50 .098 THK. THK.
O
.61 [15.8] 15.6 .81
flush strap
4.69 119.1 4.891119.11 FLUSH STRAP STRAP FLUSH .315 8.00 PIN PIN 0.315[8.00] SPUN ENDS SPUN ENDS .140 3.55 .140[3.55] THK. THK.
.36 9.1
T-
OFFSET STRAP OFFSET STRAP
Steel Strap Strap Hinge Hinge with with Grease Grease Fitting Steel Fitting Part Number
H1015 H1015
Finish
Pin Pin
zinc plated zinc plated
non-removable, non-removable, steel pin pin steel
1.63 41.4
3.75 95.3
steel washers washers I steel
4.50 114.3
2.00 50.8
3.25 82.6
.380 9.65 HOLE (4) PLCS. 1.13 28.7
1.52 38.6
1.50 38.1
.500 12.70 0.503[12.10] PIN
.158 4.00 156[455] THK.
.69 17.5 .69[1,5]
Part Part No. No.
H3180 H3180
Material Material
Finish Finish
Dim A Dim A
Dim B Dim B
steel steel
zinc zinc plated plated
2.13 2.13 [54.0] [54.0]
2.13 2.13 [54.0] [54.0]
w DIM A
Steel Strap Strap Hinge Hinge with with Grease Grease Fitting Steel Fitting
DIM B
non-removable steel steel pin pin I non-removable
4.43 112.5 4.43[112.5]
.500 12.70 PIN ø.500[12.70j P
.51 13.0 _t .51 [13.0] TYP.
Request Info
1-800-453-1692 www.aboveboardelectronics.com
I.
50.8 2.00 [50.8]
.250 [6.35] 6.35 .250 GREASE FITTING GREASE FITTING
.1850 4.700 .1850 [4.700] THK.
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
281 281
Hinges
Steel Grease Fitting Steel Strap Strap Hinge Hinge with with Grease Fitting Part No. Part No.
•
.0111k,• •
H1086LH H1086LH
.340 8.64 HOLES (4) PLCS.
F
Finish Finish
Pin Pin
gray non-removable, graypowder powder non-removable, coated brass coated brass pin pin
steelwashers washers I steel
1.00 25.4 3.25 82.6
kr 1.50 38.1
.88 22.2
1.43 36.3
1.21 30.7
.500 12.70 0.50011E70] SWAGED PIN SWAGED RN .187 4.75 THK. THK. .187[4.75] TYP. TM. 1
45°
I
.64 16.3 .81[18.9]
I]-.-. 2.08 2.06 [59.31 52.3
3.75 95.3 9.75[95.9]
5.00 1127.01 127.0 5]00
Stainless Strap Hinge StainlessSteel Steel Strap Hinge ID Part Part Number Number 1.26 [32.0] 32.0 1.26
2.58 [65.5] 65.5 2.58
HSH4516SS HSH4516SS
2.76 [70.0] 70.0 2.76
1.97 [50.0] 50.0 1.97 CENT.
Material Material
Finish Finish
304SS 304SS
tumbled tumbled deburred deburred
1.97 [50.0] 50.0 2 1.97 65.5 2.58 58 [65.5] CENT.
.83 [21.2] 21.2 .83
5.76 146.2 5.76 [146.2] 4.53 [115.0] 115.0 4.53
.39 [10.0] 10.0 .39
4.00 .157 [4.00] .157
Plastic Strap Plastic Strap Hinge Hinge Part No.
1009P 1009P
Material
Finish Finish
plastic plastic
matte black matte black
304SS pin pin with with passivated passivated finish finish ►304SS .79 [20.0] 20.0 .79
4.25 [108.0 4.25 08.0]
.96 24.5 96 [24.5]
1.77 45.0 .77 [45.0]
3.11 79.0
2.28 [58.0] 58.0 2.28
[79'0] CENT. 3.11 C. ENT
.256 [6.50] 6.50 THRU THRU WITH WITH 0.256 .472 [12.00] [12.00] xx 90° 90 C'SINK C'SINK 0.472 (5) PLACES PLACES (5) .39 10.0 39 [10.0]
.236 [6.00] 6.00 0.236 PIN PIN
5.16 131.0 5.16[131.0] 3.58 [91.0] 91.0 3.58
.43 11.0] 11.0 .43[ 1
282
Download Download 3DmoDE @@www.spep.com www.spep.com
Request Info
1-800-453-1692 www.aboveboardelectronics.com
'--oc '---1•••--Hingesand andInrhictr'-' Industrial 1Hardware
SmallThermoplastic Thermoplastic Flush Flush Hinge r Small Hinge
Part Part Number Number
1004P02 1004P02
Finish Finish
Pin Pin
black, black, smooth smooth
non-removable, non-removable, glass glass reinforced reinforced thermoplastic thermoplastic
1.15 29.2 1.15[29.2] .21 5.2 21[5.2]
.90 22.9 a0[22.9]
Hinges
a
•/ 4
glass reinforced reinforced thermoplastic I glass thermoplastic (weather for outdoor exposure) (weather grade grade for outdoor exposure) rust proof proof I rust self lubricating lubricating washers I self washers reinforced ribs ribs on I reinforced on underside underside for for added added strength strength ►maximum maximum loads: loads: axial: 100 100 lbs. I axial: lbs. radial: 200 200 lbs. lbs. I radial:
.93 23.5 .93[23.5]
1.60 40.6 2.16[54.9] 2.16 54.9 1.60[40.6] CENT. CENT.
CENT. CENT.
nr, ,, 1.27 32.3 ' [
'[
.135 3.43 HOLE HOLE WITH WITH 0.135[3.43] .253[ 6.43 6.43 ]] x82 x 82 ° C'SINK 0.253( CSINK (6) PLCS. (6) PLCS.
.27 6.9 .27[6.9]
2.96 75.2 2.96[75.2] 2.30 58.4 2.30[58.4] .39 9.8 .39[8]
Part Part Number Number
1004P01 1004P01
fp Finish Finish
Pin Pin
black, black, smooth smooth
non-removable, non-removable, glass glass reinforced reinforced thermoplastic thermoplastic
glass reinforced reinforced thermoplastic I glass thermoplastic (weather for outdoor exposure) (weather grade grade for outdoor exposure) rust proof proof I rust self lubricating lubricating washers I self washers reinforced ribs ribs on I reinforced on underside underside for for added added strength strength ►maximum maximum loads: loads: axial: 150 150 lbs. lbs. I axial: radial: 300 300 lbs. lbs. I radial:
.26 6.5
3.16 80.3
1.80 45.8
Medium Medium Thermoplastic Thermoplastic Flush Flush Hinge Hinge
1.40 35.6
1.36 34.6 CENT.
2.56 65.0 CENT.
1.97 50.0
.205 5.21 HOLE HOLE WITH WITH 0.205E5211 .390[ 9.91 ]I xx92.CSINK 82 C'SINK 39019.91 (6) PLCS.
.30 7.6
4.36 110.7 3.50 88.9
.48 12.2
Part Part Number Number
1004P 1004P
a Finish Finish
Pin Pin
black, black, smooth smooth
non-removable, non-removable, glass glass reinforced reinforced thermoplastic thermoplastic
glass reinforced reinforced thermoplastic I glass thermoplastic (weather for outdoor exposure) (weather grade grade for outdoor exposure) rust proof proof I rust self lubricating lubricating washers I self washers reinforced ribs ribs on I reinforced on underside underside for for added added strength strength ►maximum maximum loads: loads: axial: 200 200 lbs. lbs. I axial: radial: 400 400 lbs. lbs. I radial:
2.21 56.1 ] 2.21[56.1
Large Large Thermoplastic Thermoplastic Flush Flush Hinge Hinge
2.00 50.8 2.00[50.8]
3.28 83.3
1.85 46.9 1'85[46'9] 2.50 63.5 ] 2.50[63.5 CENT. CENT.
4.00 101.6 4.00] 01.61 128[833] CENT. CENT.
.267 6.78 HOLE HOLE WITH WITH 0.267[6.78] .75 19.0 .75[19.0]
SO.406[ .406]10.31 10.31] ]xx100 100°C'SINK CSINK (6) (6) PLCS. PLCS. 5.81 147.6 5.81[147.6] 4.71 119.5 ] .71[119.5
II .51 13.1 .51[13.1]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
283 283
Hinges
Steel Strap Hinge Part Number Part Number
C
H4000 H4000
6.31 160.3 6.31[160.3]
9.06 230.2 9.06[230.2]-
Material Material
Finish Finish
steel steel strap strap and and pin, pin, cast base cast iron iron base
clear clear zinc zinc plated plated
1.00 25.4 ]
4.00[101.6 101.6 ] 5 50[13, 7] 4.00 5.50 139.7 CENT. CT. [N
1.50 38.1 1.50[38.1]
.344 8.73 HOLE 0 .344[8.73]HOLE (5) PLCS. PLCS. (5)
-.-2.13[54.0] 2.13 54.0
2.88 73.0 2.88[73.0]
25.25 641.4 25.25[641.4]
.165 4.20 .165[4.20] THK. THK.
I
1.38 34.9 1.38[34.9] .75 19.1 .75[19.11i
T
.500 12.70 ] PIN PIN 0.500[12.70 SPUN BOTH BOTH ENDS ENDS SPUN
-a-1.50[38.1] 1.50 38.1
Strap Strap Hinges Hinges Part PartilM Number Number
H1090A H1090A
ir Material Material
Finish Finish
Pin Pin
aluminum aluminum
mill mill
non-removable, non-removable, 304SS 304SS
steel steel
zinc plated zinc plated
non-removable, non-removable, steel steel
H1090ZN H1090ZN 1.13 28.6 1.13[28.6 3.00 76.2 3.00[76.2]
H1090A has ►H1090A has 304SS 304SS washers washers H1090ZN has ►H1090ZN has grease greasefitting fitting
2.25 57.2 2.25[57.2]
1.77 45.0 1.77[450]
4.50 114.3 3.25 82.6 4.50[ 14.3] 3.25[826]
.406 10.32 HOLE HOLE 0.406[10.32] (5) PLCS. (5) PIGS.
SPOT WELD WELD SPOT (3) PLCS. (3) PLCS. 1.50 38.1 .30[301]
1.88 47.6 1.88[47.6]
8.00 203.2 8.00[2032] .177 4.50 .177[4.50] THK. THK
.70 17.8 .70[17.8] .500 12.70 PIN PIN 0.500[12.70] FORMED BOTH ENDS
316SS Strap 316SS Strap Hinge Hinge
3165S
Part Number
Material
Finish
Pin
H3170SST
316SS
electropolished
non-removable, 316SS
316SS washers 1.13 28.6 1.13[28.6] 3.00 76.2 3.00[76.2]
aria 3.25 82.6 CENT.
4.50 114.3 4.50[ 14.3] 3-25 C; N 82T-61
ma .
1.50[38.1]
2.25 57.2 2.25[57.2]
41
1.50 38.1
3
1.77 45.0 1.77[.3.0] 4
i
n
-e7
.500 12.70 PIN PIN 0.500[12.70] BOTH ENDS SPUN SPUN
s(4PI) DpIcsWE.LD
SPOT WELD (4) PLCS.
11.50 292.1 11.50[292.1] .177 4.50] 4.50 i -.177[
.70 17.8 .70[ 17.8] 3.28 83.2 -.-3.28[83.2]
Download 31:Immo @@www.spep.com www.spep.com 284 Download 284
.406 10.32] 10.32 HOLE HOLE 0.406[ (6) PLCS. (6) PLCS.
.52 13.3 .52[ 13.3]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and any Industrial Hardware -----
Standard Base Base with with Standard Standard Strap Strap -- (5) Standard (5) Holes Holes Material Material
Finish Finish
H308004 H308004
Part Part Number Number
steel steel
zinc plated zinc plated
H308004SS H30800455
304SS 304SS
mill mill
H308004A H308004A
aluminum aluminum
mill mill
H312004 H312004
steel steel
zinc plated zinc plated
H312004SS H31200455
304SS 304SS
mill mill
H312004A H312004A
aluminum aluminum
mill mill
H314004 H314004
steel steel
zinc plated zinc plated
H314004SS H31400455
304SS 304SS
mill mill
H314004A H314004A
aluminum aluminum
mill mill
H316004 H316004
steel steel
zinc plated zinc plated
H316004SS H31600455
304SS 304SS
mill mill
H316004A H316004A
aluminum aluminum
mill mill
A A
B B
C C
Length Lengtli
2.438 2.438 [61.63] [61.63]
2.438 2.438 [61.63] [61.63]
1.250 1.250 [31.75] [31.75]
8.00 8.00 [203.2] [203.2]
4.438 4.438 [112.73] [112.73]
4.438 4.438 [112.73] [112.73]
1.250 1.250 [31.75] [31.75]
12.00 12.00 [304.8] [304.8]
4.438 4.438 [112.73] [112.73]
4.438 4.438 [112.73] [112.73]
1.250 1.250 [31.75] [31.75]
14.00 14.00 [355.6] [355.6]
6.438 6.438 [163.53] [163.53]
6.438 6.438 [163.53] [163.53]
1.250 1.250 [31.75] [31.75]
16.00 16.00 [406.4] [406.4]
Hinges
Strap Hinges Strap Hinges
aluminumhinges hinges have have stainless stainless steel steel pins pins and I aluminum and washers washers SPOT WELD WELD (3) PLCS. PLCS. (3)
00
.344 8.73 HOLE HOLE 0.344[8.73] (3) PLCS. PLCS. (3)
3.25 82.6 4.50 114.3 4.50[ 14.3] 3.25[82.8]
2.00 50.8 2.00[50.8]
A A
AI D .380 9.65 HOLE 0.380[9.85] HOLEY (2) PLCS.
C
Custom Options Custom Options
LENGTH LENGTH
1.63 41.3 ] 1.83[ 41.3 .500 12.70 PIN PIN 0.500[12.70] .69 17.5 .89[17.5]
B B
1.13 28.7 1.-1.13[28.7]
.157 4.00 .157[4.00] THK. THK
hole pattern pattern custom hole I custom square holes I square holes grease fittings fittings I grease
general general options options
—f-
steel steel (500 pieceminimum minimum order) order) (500 piece
powder coated coated I powder stainless steel steel pin pin and and washers washers I stainless brass pin pin and and washers washers I brass
aluminum I= I polished aluminum polished (250 pieceminimum minimum order) order) anodized (250 piece I anodized stainless steel stainless steel (250 pieceminimum minimum order) order) (250 piece
hand polished polished I hand electropolished ► electropolished ► passivated passivated
minimumorder order quantity quantity will will apply I minimum apply for for these these custom custom options options
Shims
Part Number
H3-03 H3-03
Material
Finish
steel steel
blue zinc blue zinc
H3-03SS H3-0355
304SS 304SS
mill mill
H3-03A H3-03A
aluminum aluminum
mill mill
materialthickness: thickness:.125 .125 [3.18] [3.18] I material
Request Info
1-800-453-1692
To Place 800.433.5554
[email protected] To PlaceOrder: Order ta 800.433.5554 IN
[email protected] www.aboveboardelectronics.com
285 285
Hinges
'wm" -MCIFIC dr
ENGINEERING AND PRODUCTS
Strap Strap Hinges Hinges Standard Base Base with Offset Strap Strap -- (4) Holes Standard with Offset (4) Holes
IH308005
Part Number Part Number
C
Material
Finish
H308005
steel steel
zinc plated zinc plated
H308005SS H30800555
304SS 304SS
mill mill
H308005A H308005A
aluminum aluminum
mill mill
A
B
Length Length
3.313 3313 [84.15] [84.15]
1.250 1.250 [31.75] [31.75]
8.00 8.00 [203.2] [203.2]
aluminumhinges hingeshave havestainless stainlesssteel steel pins pins and and washers washers I aluminum
.344 8.73 HOLE HOLE 0.344[8.73] (2) PLCS.
SPOT WELD (4) PLCS.
4.50 114.3 3.25 82.6 4.50[ 14.3] 3.25
2.00 50.8 2.00[50.8]
A .380 9.65 HOLE HOLE 0.380[9.65] (2) PLCS.
B
1.13 28.7 28.7 ] 1-.-1.13[
1.63 41.3 183[41.3
LENGTH
]
.500 12.70 PIN PIN 0.500[12.70] .157 4.00 .159[4.00 THK. THK
_{
.69 17.5 2.00 50.8 2.00[50.8]
.44 11.1 .44[11.1]
Standard Base Base with Offset Strap Strap -- (5) Holes Standard with Offset (5) Holes Part Number Material Part NumallMaterial
Custom Options custom hole hole pattern pattern I custom square holes holes I square grease fittings I grease fittings
general options general options
Finish Finish
A A
B B
C C
Length Length
H312005 H312005
steel steel
zinc plated zinc plated
3.625 3.625 [92.08] [92.08]
3.625 3.625 [92.08] [92.08]
1.250 1.250 [31.75] [31.75]
12.00 12.00 [304.8] [304.8]
H312005-01* H312005-01*
steel steel
zinc plated zinc plated
2.500 2.500 [63.50] [63.50]
2.500 2.500 [63.50] [63.50]
1.344 1344 [34.14] [34.14]
12.00 12.00 [304.8] [304.8]
H312005SS H31200555
304SS 304SS
mill mill
H312005A H312005A
aluminum aluminum
mill mill
3.625 3.625 [92.08] [92.08]
3.625 3.625 [92.08] [92.08]
1.250 1.250 [31.75] [31.75]
12.00 12.00 [304.8] [304.8]
3.625 3.625 [92.08] [92.08]
3.625 3.625 [92.08] [92.08]
1.250 1.250 [31.75] [31.75]
14.00 14.00 [355.6] [355.6]
5.625 5.625 [142.88] [142.88]
5.625 5.625 [142.88] [142.88]
1.250 1.250 [31.75] [31.75]
16.00 16.00 [406.4] [406.4]
steel steel (500 order) piece minimum minimum order) (500 piece
powdercoated coated I powder stainlesssteel steel pin pin and and washers washers I stainless brasspin pinand and washers washers I brass
aluminum aluminum (250 order) (250 piece piece minimum minimum order)
polished I polished anodized I anodized
H314005 H314005
steel steel
zinc plated zinc plated
H314005SS H31400555
304SS 304SS
mill mill
stainless stainless steel steel (250 order) piece minimum minimum order) (250 piece
handpolished polished I hand electropolished ►electropolished ►passivated passivated
H314005A H314005A
minimumorder orderquantity quantitywill willapply applyfor forthese these custom custom options I minimum options
aluminum aluminum
mill mill
H316005 H316005
steel steel
zinc plated zinc plated
H316005SS H31600555
304SS 304SS
mill mill
H316005A H316005A
aluminum aluminum
mill mill
thishinge hingehas hasaalonger longeroffset offsetdimension dimensionofof3.50 3.50[88.9] [88.9]instead instead of of 2.00 2.00 [50.8] [50.8] I **this aluminumhinges hingeshave havestainless stainlesssteel steel pins pins and and washers washers I aluminum Shims
.344 8.73 HOLE HOLE 0.344[8.73] (3) PLCS.
SPOT WELD (4) PLCS.
4.52 114.7 3.25[82.5] 3.25 82.5 4.52[114.7]
2.00 50.8 2.00[:0.8]
A .380 9.64] 9.64 HOLE HOLE 0.380 (2) PLCS.
Material Material
Finish Finish
H3-03 H3-03
Part Number Part Number
steel steel
blue zinc blue zinc
H3-03SS H3-0355
304SS 304SS
mill mill
H3-03A H3-03A
aluminum aluminum
mill mill
■
C
LENGTH LENGTH
1.63 [ 41.3 ] 1.63[41.3 .500 12.70 PIN PIN 0.500[12.70]
.157 4.00 .157[4.00] THK THK.
.69 17.5 .69[17.5] 2.00 50.8 .44 11.1 ] 2.00[50.8] f -.44[11.1
materialthickness: thickness:.125 .125 [3.18] [3.18] I material
Request Info
1-800-453-1692 www.aboveboardelectronics.com
www.spep.com Download3DmoDELs @ @ www.spep.com 286 Download 286
B
1.13 28.7
Hinges Hinges and any Industrial Hardware -----
Reverse Base with with Offset Offset Strap Strap -- (4) Reverse Base (4) Holes Holes Part Part Number Number
Material Material
Finish Finish
H308003 H308003
steel steel
zinc plated zinc plated
H308003SS H30800355
304SS 304SS
mill mill
H308003A H308003A
aluminum aluminum
mill mill
steel steel
zinc plated zinc plated
H312003-01 H312003-01
A
B B
Length Length,
3.313 3313 [84.15] [84.15]
1.250 1.250 [31.75] [31.75]
8.00 8.00 [203.2] [203.2]
3.625 3.625 [92.08] [92.08]
1.250 1.250 [31.75] [31.75]
[204.8] [204.8]
Hinges
Strap Hinges Strap Hinges
12.00 12.00
aluminumhinges hinges have have stainless stainless steel steel pins pins and I aluminum and washers washers .344 8.73 HOLE HOLE 0.944[8.79] (2) (2) PLCS. PLCS.
SPOT WELD WELD SPOT (2) (2) PLCS. PLCS.
2.00 50.8 2.00[5013]
4.50 114.3 3.25 82.6 4.50[ 149] 925[82.6]
A .380 9.65 HOLE HOLE 0380[9.65] (2) PLCS. (2) PLCS.
B
1.13 28.7 1.19[28.7
LENGTH LENGTH
.63[41.3]
.500 12.70 PI PIN 0.500[12.70]
1.63 41.3
.157 4.00 .157[4.00] THK. THK.
.69 17.5 .69[17.5]
7
.44 11.1 .44[11.1]
2.00 50.8 2.00[50.8]
Reverse Base with with Offset Offset Strap Strap -- (5) Reverse Base (5) Holes Holes Part Part Number Number
Material Material
Finish
H312003 H312003
steel steel
zinc plated zinc plated
H312003SS H31200355
304SS 304SS
mill mill
3.625 3.625
H312003SS-01 H31200355-01
304SS 304SS
passivated passivated
[92.08] [92.08]
aluminum aluminum
mill mill
H314003 H314003
steel steel
zinc plated zinc plated
H314003SS H31400355
304SS 304SS
mill mill
H314003A H314003A
aluminum aluminum
mill mill
H316003 H316003
steel steel
zinc plated zinc plated
H316003SS H31600355
304SS 304SS
mill mill
H316003A H316003A
aluminum aluminum
mill mill
H312003A H312003A
A • A
3.625 3.625 [92.08] [92.08]
B B
3.625 3.625 [92.08] [92.08]
3.625 3.625 [92.08] [92.08]
C C
1.250 1.250 [31.75] [31.75]
12.00 12.00
1.250 1.250 [31.75] [31.75]
14.00 14.00 [355.6] [355.6]
5.625 5.625 1.250 16.00 5.625 5.625 1.250 16.00 [142.88] [142.88] [142.88] [31.75] [31.75] [406.4] [406.4] [142.88]
SPOT WELD WELD SPOT (4) PLCS. (4) PLCS.
custom hole hole pattern I custom pattern square holes holes I square grease fittings fittings I grease
general general options options
[304.8] [304.8] steel steel (500 (500 piece piece minimum minimum order) order)
powder coated coated I powder stainless steel steel pin pin and and washers washers I stainless brass pin pin and and washers washers I brass
aluminum aluminum (250 (250 piece piece minimum minimum order) order)
I polished polished anodized I anodized
stainless stainless steel steel (250 piece minimum minimum order) order) (250 piece
polished ►hand hand polished electropolished ►electropolished ►passivated passivated
will apply ►minimum minimum order order quantity quantity will apply for forthese these custom custom options options
aluminumhinges hinges have have stainless stainless steel steel pins pins and I aluminum and washers washers
Shims
.344 8.73 HOLE HOLE 0.944[8.79] (3) PLCS. (9) PLCS.
4.50 114.3 3.25 82.6 4.50[ 149] 9.25[82.6
2.00 50.8 2.00[50.8]
A .380 9.65 HOLE HOLE 0380[9.65] (2) PLCS. (2) PLCS.
Custom Options
Length LengtIll
B
C
1.1
1.13 28.7 1.13[28.7]
1.63 41.3 1.69[41.9]
.500 12.70 PI PIN 0.500[12.70]
.157 4.00 .157[4.00] THK. THK.
.69 17.5 .69[17.5 2.00 50.8 2.00[50.8]
.44 11.1 .44[11.1]
Material Material
Finish Finish
H3-03 H3-03
steel steel
blue zinc blue zinc
H3-03SS H3-0355
304SS 304SS
mill mill
H3-03A H3-03A
aluminum aluminum
mill mill
▪
LENGTH LENGTH
7
Part Part Number Number
materialthickness: thickness:.125 .125 [3.18] [3.18] I material
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
287
Hinges
'wm" -MCIFIC dr
ENGINEERING AND PRODUCTS
•
Strap Hinges Strap Hinges
Tri-shaped Base Standard Strap Strap -- (6) Tri-shaped Base with with Standard (6) Holes Holes
IH308000
Part Part Number Number
C
Material Material
Finish Finish.
steel steel
zinc plated zinc plated
H308000SS H30800055
304SS 304SS
mill mill
H308000A H308000A
aluminum aluminum
mill mill
H312000 H312000
steel steel
zinc plated zinc plated
H312000SS H31200055
304SS 304SS
mill mill
H312000A H312000A
H308000
aluminum aluminum
mill mill
H314000 H314000
steel steel
zinc plated zinc plated
H314000SS H31400055
304SS 304SS
mill mill
H314000A H314000A
aluminum aluminum
mill mill
H316000 H316000
steel steel
zinc plated zinc plated
H316000SS H31600055
304SS 304SS
mill mill
H316000A H316000A
aluminum aluminum
mill mill
A
B B
C C
Length Length
2.438 2.438 [61.90] [61.90]
2.438 2.438 [61.90] [61.90]
1.250 1.250 [31.75] [31.75]
8.00 8.00 [203.2] [203.2]
4.438 4.438 [112.73] [112.73]
4.438 4.438 [112.73] [112.73]
1.250 1.250 [31.75] [31.75]
12.00 12.00 [304.8] [304.8]
4.438 4.438 [112.73] [112.73]
4.438 4.438 [112.73] [112.73]
1.250 1.250 [31.75] [31.75]
14.00 14.00 [355.6] [355.6]
6.438 6.438 [163.50] [163.50]
6.438 6.438 [163.50] [163.50]
1.250 1.250 [31.75] [31.75]
16.00 16.00 [406.4] [406.4]
aluminumhinges hinges have have stainless stainless steel steel pins pins and I aluminum and washers washers .406 10.32 HOLE HOLE 0.406[10.92] (3) (3) PLCS. PLCS.
.344 8.73 HOLE HOLE 0.344[8.73] (3) PLCS. (3) PLCS.
1.63 41.3 1.63[41.3] 4.50 114.3 4.50[ 14.3]
2.00 50.8 2.00[50.8] 1.63 41.3 1.63[41.3]
A A 1.38 34.9 1.38[34.9]
B B
C
1.19 30.2
LENGTH LENGTH
3.00 76.2 .500 12.70 PIN PIN 0.500[12.70]
.157 4.00 .157[4.00] THK. THK.
.69 17.5 .63[17.5
Custom Custom Options Options
■
custom hole hole pattern I custom pattern square holes holes I square grease fittings fittings I grease
general options general options
steel steel (500 piece minimum minimum order) order) (500 piece
powder coated coated I powder stainless steel steel pin pin and washers I stainless and washers brass pin pin and and washers washers I brass
aluminum aluminum (250 (250 piece piece minimum minimum order) order)
polished I polished anodized I anodized
stainless stainless steel steel (250 piece minimum minimum order) order) (250 piece
hand polished polished I hand ►electropolished electropolished ►passivated passivated
Tri-shaped Base Offset Strap Strap -- (5) Tri-shaped Base with with Offset (5) Holes Holes •
Material
Finish
H308001 H308001
Part Part Number Number
steel steel
zinc plated zinc plated
H308001SS H30800155
304SS 304SS
H308001SS-01 H30800155-01 H308001A H308001A
A
B
Length Length
mill mill
3.313 3.313
304SS 304SS
passivated passivated
[84.15] [84.15]
1.250 1.250 [31.75] [31.75]
8.00 8.00 [203.2] [203.2]
aluminum aluminum
mill mill
aluminumhinges hinges have have stainless stainless steel steel pins pins and I aluminum and washers washers
minimumorder orderquantity quantitywill will apply I minimum apply for for these these custom custom options options
.406 10.32 HOLE HOLE A06[10.92] (3) (3) PLCS. PLCS.
.344 8.73 HOLE HOLE 0.344[8.73] (2) (2) PLCS. PLCS.
SPOT WELD WELD SPOT (4) (4) PLCS. PLCS.
Shims 1.63 41.3 1.63[41.3] 4.50 4.50[114.3 14.3]
2.00 50.8 2.00[50.8] 1.63 41.3 1.63[41.3]
A 1.38 34.9 138[34.9]
3.00 76.2 9.00[76.2]
Part Part Number Number
Material Material
Finish Finish
H3-01 H3-01
steel steel
blue zinc blue zinc
H3-01SS H3-0155
304SS 304SS
mill mill
H3-01A H3-01A
aluminum aluminum
mill mill
.157 4.00 .157[4.00] THK. THK.
.69 17.5 .69[17.5] 2.00 50.8 -.- -A4{11.1] .44 11.1 2.00[50.8]
Request Info
Download 3DmoDELs @ @www.spep.com www.spep.com Download
LENGTH LENGTH .500 12.70 PIN PIN 0.500[12.70]
materialthickness: thickness:.125 .125 [3.18] [3.18] I material
288 288
B
1.19 30.2 30.2 ] -,-.1.13]
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and any Industrial Hardware -----
Tri-shaped Base with Offset Offset Strap Strap -- (6) Tri-shaped Base with (6) Holes Holes Part Number Part Number
Material Material
Finish Finish
H312001 H312001
steel steel
zinc plated zinc plated
H312001SS H31200155
304SS 304SS
H312001SS-01 H31200155-01
304SS 304SS
H312001A H312001A
A A
B B
C C
mill mill
3.625 3.625
passivated passivated
[92.08] [92.08]
3.625 3.625 [92.08] [92.08]
1.250 1.250 [31.75] [31.75]
[304.8] [304.8]
3.625 3.625 [92.08] [92.08]
3.625 3.625 [92.08] [92.08]
1.250 1.250 [31.75] [31.75]
14.00 14.00 [355.6] [355.6]
5.625 5.625 [142.88] [142.88]
5.625 5.625 [142.88] [142.88]
1.250 1.250 [31.75] [31.75]
16.00 16.00 [406.4] [406.4]
aluminum aluminum
mill mill
H314001 H314001
steel steel
zinc plated zinc plated
H314001SS H31400155
304SS 304SS
mill mill
H314001A H314001A
aluminum aluminum
mill mill
H316001 H316001
steel steel
zinc plated zinc plated
H316001SS H31600155
304SS 304SS
mill mill
H316001SS-01 H31600155-01
304SS 304SS
passivated passivated
aluminum aluminum
mill mill
H316001A H316001A
Length Lengt11
12.00 12.00
Hinges
Strap Strap Hinges Hinges
aluminumhinges hingeshave have stainless stainless steel steel pins pins and I aluminum and washers washers .406 10.32 HOLE HOLE 0.406[1032] (3) PLCS. 8.73 HOLE 0 .344 [6.73]HOLE (3) PLCS. PLCS. (3)
SPOT WELD WELD SPOT (4) PLCS. 1.63 41.3 1133[41.3] 4.50 114.3
2.00 50.8 2.00[50.8] 1.63 41.3 183[41.3]
A 1.38 34.9 1.38[34.9]
C
B
1.19 30.2
LENGTH LENGTH
3.00 76.2 3.00[752] .500 12.70 PIN PIN 0.500[12.30]
.157 4.00 .157[4.] THK. THK
.69 17.5 .60[17.5] 2.00 50.8 2.00[50.8]
.44 11.1
Reverse Offset Strap Strap -- (6) Reverse Tri-shaped Tri-shaped Base Base with with Offset (6) Holes Holes Part Number Part Number
Material Material
H312002 H312002
steel steel
Finish Finish
A A
B B
C C
Length Length
zinc plated zinc plated
3.00 3.00 [76.2] [76.2]
2.25 2.25 [57.2] [57.2]
2.00 2.00 [50.8] [50.8]
12.00 12.00 [304.8] [304.8]
Custom Options Custom Options general general options options
10.32 HOLE HOLE 0 .406 A06[10.32] (6) PLCS. PLCS. (6)
SPOT WELD SPOT WELD (2) PLCS. PLCS. (2)
1.63 41.3 1.63[91.3] 4.50 114.3 9.50[ 19.3]
steel steel (500 piece minimum minimum order) order) (500 piece
powdercoated coated I powder stainless steel steel pin pin and and washers washers I stainless brasspin pin and and washers washers I brass
aluminum aluminum (250 (250 piece piece minimum minimum order) order)
polished I polished anodized I anodized
stainless stainless steel steel (250 piece minimum minimum order) order) (250 piece
hand polished polished I hand ►electropolished electropolished ►passivated passivated
2.00 50.8 2.00[50.8] 1.63 41.3 1.63[91.3]
A 1.12 28.4 1.12[28.9]
B
C
1.37 34.8 1.37[39.8
LENGTH LENGTH .500 12.70 PI PIN 0.500[12.70]
custom hole hole pattern I custom pattern square holes holes I square grease fittings fittings I grease
minimum order order quantity quantitywill will apply I minimum apply for for these these custom custom options options
2.50 63.5 2.5otes.51 .157 4.00 .157[9.00] THK. THE.
.69 17.5 .03[17.0
3.00 76.2 -9-3.00[76.2]
.44 11.1 .44[11.1]
Steel Strap Hinge Steel Strap Hinge Part A Finish A ParTYFinish Number Number
H1082ZN H1082ZN
B ren Length B gl
zinc 3.42 3.31 3.31 8.00 8.00 zinc 3.42 plated [86.9] [84.1] [84.1] [203.2] [203.2] plated [86.9]
SPOT WELD WELD SPOT (2) PLCS.
.281 7.15 HOLE HOLE 0.281[7.15] (4) PLCS.
2.63 66.8 1.50[313.1] 1.50 38.1 2.63[633.6]
7.08 3.63 3.63 12.00 H1083ZNzinc zinc 7.08 12.00 H1083ZN plated [179.8] [92.2] [92.2] [304.8] [304.8] plated [179.8]
.63 15.9 .63[15.9]-9-
2.00 50.8
A A
B B
zinc plated platedpin pin self self lubricating lubricating plastic I zinc plastic bushings bushings LENGTH LENGTH
1.75 44.5 .375 9.53 C.D.S. C.D.S. PIN PIN 0.375[9.53] SWAGED ENDS
.157 4.0 157[4.0] THK. THE
.75 19.22] 75[19 .44 11.2 .44[112]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
289 289
Hasps & Staples
SIERRA PACP"C ENGINEERING -", PRODUCTS Safety Hasp & & Staple Safety Hasp Staple (Steel) (Steel) B
Finish
2803 2803
zinc zinc plated plated mill mill
2803PL 2803PL 2804 2804
A
2804PL 2804PL
C
Material Finish Material
Part Part Number Number
2806 2806 2806PL 2806PL
Screw Screw
A A
B
C
.080 [2.03] [2.03] .080
3.30 [83.8] 330 [83.8]
1.50 [38.1] [38.1] 1.50
1.31 [333] [33.3] 131
#6 #6
.080 [2.03] [2.03] .080
Thickness Thickness
Size Size
3.30 [83.8] 330 [83.8]
1.50 [38.1] [38.1] 1.50
1.31 [333] [33.3] 131
#6 #6
zinc zinc plated plated
.080 [2.03] 4.43[112.5] [112.5] .080 [2.03] 4.43
1.50 [38.1] [38.1] 1.50
1.97 [50.0] [50.0] 1.97
#7 #7
mill mill
.080 [2.03] 4.43[112.5] [112.5] .080 [2.03] 4.43
1.50 [38.1] [38.1] 1.50
1.97 [50.0] [50.0] 1.97
#7 #7
zinc zinc plated plated
.080 [2.03] 6.00 [152.4] [152.4] 1.75 1.75[44.5] [44.5] .080 [2.03] 6.00
2.71 2.71 [68.8] [68.8]
#8 #8
mill mill
.080 [2.03] 6.00 [152.4] [152.4] 1.75 1.75[44.5] [44.5] .080 [2.03] 6.00
2.71 2.71 [68.8] [68.8]
#8 #8
Safety Hasp & & Staple Safety Hasp Staple (Steel) (Steel) Part Part Number Number B A A
Thickness Thickness
A A
B
C
Screw Screw Size Size
zinc zinc plated plated
.067 .067 [1.70] [1.70]
2.50 2.50 [63.5] [63.5]
1.00 1.00 [25.4] [25.4]
1.125 1.125 [28.58] [28.58]
#5 #5
2812PL 2812PL
mill mill
.067 .067 [1.70] [1.70]
2.50 2.50 [63.5] [63.5]
1.00 1.00 [25.4] [25.4]
1.125 1.125 [28.58] [28.58]
#5 #5
Part Part Number Number
Finish Finish
2833 2833
zinc zinc plated plated
2834 2834
2812 2812
.dicav
Material Material
Finish Finish
C
Swivel Safety Hasp Hasp & & Staple Swivel Safety Staple (Steel) (Steel)
B O A A
\
A,7
C
Material Material
Screw Screw Size Size
A A
B
C
.075 .075 [1.91] [1.91]
3.25 3.25 [82.6] [82.6]
1.50 1.50 [38.1] [38.1]
[32.5] [32.5]
zinc zinc plated plated
.075 .075 [1.91] [1.91]
4.34 4.34 [110.2] [110.2]
1.50 1.50 [38.1] [38.1]
1.94 1.94 [49.3] [493]
#7 #7
2836 2836
zinc zinc plated plated
.079 .079 [2.00] [2.00]
6.00 6.00 [152.4] [152.4]
1.75 1.75 [44.5] [44.5]
2.75 2.75 [69.9] [69.9]
#8 #8
Part Part Number Number
Finish Finish
2817 2817
zinc zinc plated plated
21,"
Thickness Thickness
1.28 1.28
Staple Staple Part Part No. No.
#7 #7
283S 2835
Large Large Safety Safety Hasp Hasp & &Staple Staple (Steel) (Steel) A B
Material Material Thickness Thickness .157 .157 [4.00] [4.00]
Screw Screw
A A
B
C
7.00 7.00 [177.8] [177.8]
2.50 2.50 [63.5] [63.5]
2.75 2.75 [69.9] [69.9]
Size Size #10 #10
this part part is is non-stock non-stock I this
74.F)1
4
c
C
Double Hinge Safety Safety Hasp Hasp and and Staple Staple Kit Kit (Steel) Double Hinge (Steel) Part Part Number Number A
B C
Screw Screw
Hasp Hasp
Size Size
Thickness Thickness
1.31 131 [33.3] [333]
#7 #7
.080 .080 [2.00] [2.00]
zinc zinc plated plated
2.00 2.00 [50.8] [50.8]
#7 #7
.080 .080 [2.00] [2.00]
zinc zinc plated plated
A A
B B
C C
Screw Screw Size Size
A A
B
C
D
2853 2853
3.25 3.25 [82.6] [82.6]
1.50 1.50 [38.1] [38.1]
2.50 2.50 [63.5] [63.5]
2854 2854
4.50 4.50 [114.3] [1143]
1.50 1.50 [38.1] [38.1]
2.50 2.50 [63.5] [63.5]
Finish Finish
theseparts partsare are non-stock non-stock I these
NA( D Heavy Heavy Duty Duty Hasp Hasp & &Case CaseHardened HardenedStaple Staple (Steel) (Steel)
Part Part Number Number B A
C
2847 2847 2847PL 2847PL
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Thickness Thickness
zinc plated zinc plated
.15 .15 [3.8] [3.8]
3.25 3.25 [82.6] [82.6]
1.88 1.88 [47.6] [47.6]
4.00 4.00 [101.6] [101.6]
#10 #10
mill mill
.15 .15 [3.8] [3.8]
3.25 3.25 [82.6] [82.6]
1.88 1.88 [47.6] [47.6]
4.00 4.00 [101.6] [101.6]
#10 #10
Request Info
290 290
Material Material
Finish Finish
1-800-453-1692 www.aboveboardelectronics.com
Hinges and and industrial IndustrialHardiA---rn Hardware Hinges
Finish Finish
2830ZN 2830ZN
zinc plated zinc plated
120.7 4.75 [120.7] 1.30 [33.0] 33.0 X1.30
1
1.75 44.5 7.75[44.5]
1.72 [43.8] 43.8 1.72
.250 6.35 0.250[6.35] (4) HOLES
.36[9.1] 9.1 - .36
CL
1.00 25.4 2.25[57.2] 2.25 57.2 1.00[25.4]
[12.70] ..500 511? gl 2 ] x 2.000 [50.80] (OBROUND 2 t ij.a
Hasps & Staples
Stamped Hasp (Steel) Stamped Hasp (Steel) Part Part Number Number
.50 12.7 .50[12.7] 12.7 .50 [12.7] TOP VIEW T 1./1EIN
.250 6.35 C.D.S. C.D.S. PIN PIN 0.250[6.35] BOTH ENDS SPUN SPUN
.64 16.3 .64[16.3]
.32 8.2 OFFSET OFFSET .32[8.2]
.075 1.90 .075[1.90] 3 FRONT VIEW FRONT VIEW
Light Duty Duty Hasp Hasp & & Staple Light Staple (Steel) (Steel) Hasp Hasp Part Material Material Part Number Thickness Number Thickness
2884 2884
A A
B B
C C
D D
E E
.060 1.00 1.13 .63 1.86 .250 .060 1.00 1.13 .63 1.86 .250 [1.52] [25.4] [25.4] [28.7] [28.7] [16.0] [16.0] [47.2] [47.2] [6.35] [6.35] [1.52]
Finish Finish
B A
mill mill
C D E
Staple Staple Part Number Part Number
MaterialThickness Thickness Material
Finish Finish
.079 [2.00] [2.00] .079
mill mill
2883 2883
.72 [18.3] 731 r Ø.406 [10.34] 4- 0.406 [10.34]
Specialty Hasp Hasp (Steel) Specialty (Steel) Part Number Part Number
290 290
Material Material
Finish Finish
.059 [1.50] [1.50] steel .059 steel
zinc plated zinc plated
semi-perfs for ►semi-perfs for welding welding alignment alignment 1.05 [26.6] 26.6 11.05
3.33 [84.5] 84.5 3.33
O 2.00 [50.8] 50.8 2.00
O .306 7.77 X X .618 1.618[41.09] [41.09] 0.306[7.77] OBROUND OBROUND .197 5.00 C.D.S C.D.S PIN PIN 0.197[5.00] BOTH ENDS BOTH ENDS SPUN SPUN
.055 [1.40] 1.40 .055
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
291
Hasps & Staples
6.00" Hasp and Swivel Staple Kits (Steel) Part Number
.85 21.6
.56 14.2
Finish
2966ZN 2966ZN
zinc plated zinc plated
2966BK 2966BK
black black powder powder coated coated
5.80 [147.4] 147.4 5.80 1.90 [48.3] 48.3 - 1.90 -
1.15 29.2
.74 18.7
285° 285° OPERATING OPERATING ARC ARC
.60 15.2 -')) .60[15.2] FRONT VIEW FRONT VIEW
1.94 49.3 SQUARE
4.75 120.7 4.75[120.7]
1.000 25.40 01.000[25.40]
2.00 50.8
1.10 27.9
1.25 31.8] 31.8 2.35[58.8] 2.35 59.8
JII 1.10 27.9
.234[5.95] 5.95 HOLE HOLEWITH WITH 0.234 .345[8.761x [8.76] x82 82° CSINK C'SINK 0.345 (8) PLACES PLACES (8)
.59 [14.9] 14.9 .59 .97 24.6 .97[24.6
BOTTOM VIEW
4.50" Hasp and Swivel Staple Kits (Steel) Part Part Number Number .65 [16.5] 16.5 .65
.45 11.3 ,-0.45[11.3]
4.31 1109.51 109.5 4.31 1.20 30.4 1.20[30.4]
.90 22.8 .90 [22.81
.59 14.9
.50 12.7 .50[12.7]
Finish Finish
2965ZN 2965ZN
zinc plated zinc plated
2965BK 2965BK
black black powder powder coated coated
FRONT VIEW FRONT VIEW
1.57 39.9 SQUARE
.86 22.0
3.50 88.9
.760 19.30
138° 138° OPERATING OPERATING ARC ARC
1.50 38.1
.86 22.0
.88 22.2
.230[5.84] 5.84 HOLE HOLEWITH WITH 0.230 .320(8.131x [8.13] x 82° 82 CSINK C'SINK 0.320 (7) PLACES PLACES (7)
1.80 45.7
.51 13.0 .40 10.2
BOTTOM VIEW BOTTOM VIEW
3.50" Kits (Steel) 3.50" Hasp Hasp and and Swivel Swivel Staple Staple Kits (Steel) Part Number Finish Part Number Finish .65 16.5 .65[16.5]
.41 [10.3] 10.3 0.41
3.31 [84.0] 84.0 3.31 1.20 [30.4] 30.4 1.20
.90 22.88] go [22
.59 14.9 .59[14.9]
.50 [12.7] 12.7 .50
2964ZN 2964ZN
zinc plated zinc plated
2964BK 2964BK
black black powder powder coated coated
FRO vie.li
FRONT NT VIEW
1.57 [39.91 39.9 1.57 SQUARE SQUARE
2.45 62.1 2.45 [62.1] .320 [8. 8.13 0.320 3]
138° 138° OPERATING ARC ARC OPERATING
.760 [19.30] 19.30 0.760
1.80 45.7] 45.7 .88 .00[22.2 2.2] 1.90
.86 22.0 .06[ 2.0]
( .230 5.84 HOLE HOLEWITH WITH 0.230[5.84] .320 [0.12)x02° [8.12] x 82 CSINK C'SINK 0.320 (7) PLACES PLACES (7)
.86 22.0 .90 [22 0]
.51 13.0 81 [134] .40 10.2 .40[10.2]
BOTTOM VIEW BOTTOM VIEW
2.50" Kits (Steel) 2.50" Hasp Hasp and and Swivel Swivel Staple Staple Kits (Steel) Part Part Number Number
.45 11.3 45[11.3]
2.38 [60.5] 60.5 2.38
0.24 .24 [6.1] 6.1 .67 [17.0 17.0 .67
Finish Finish
2963ZN 2963ZN
zinc plated zinc plated
2963BK 2963BK
black black powder powder coated coated
.98 [24.9] 24.9 .98
.43 11.00] 43 [11
.36 9.11] 36 [9
FRONT VIEW FRONT VIEW
1.27 32.3 1.27[32.3]
1.08 274] 27.4 .49[125] .49 12.5
.67 16.9 .67[16.9]
.500 12.70 0.500[12.70[
138° 138° OPERATING OPERATING ARC ARC
1.76 44.8 -1 1.76[44.8]
1.00 25.4
.200 5.08 HOLE HOLEWITH WITH 0.200[5.08] .290[7.361x [7.36] x 82° 82 CSINK C'SINK 0.290 (7) PLACES PLACES (7)
1.30 33.0 .57 [14.4] 14.4 1.30[300] .57
1
.40 10.2 .40[10.2] .36 9.0 .36[9.0]
BOTTOM VIEW BOTTOM VIEW
292 292
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and and industrial IndustrialHarchAp-rp Hardware Hinges
2862 2862
Finish Finish zinc plated zinc plated
2.00 50.8 2.00[50.8]
3.85 97.8 -.-3.85[97.8] 1.25 31.8 -1.25[31.8]
Hasps & Staples
Strap Strap Hasp Hasp and and Staple Staple (Steel) (Steel) Part Number Part Number
5.98 151.9 ] 5.98[151.9
.375 9.53 ].375[9.53
0
1.87 47.6 1.87[47.6]
(
1.55 39.4 1.55[39.4]
)
0 .300 7.62 ] HOLE HOLE WITH WITH 0.300[7.62 1.38 35.1 ] --.-.1.38[35.1 9\-0.350 .350 [8.89] [8.89] xx 82 82° C'SINK USINK (4) PLACES PLACES (4)
.70 17.8 .70[17.8]
.265 6.73 HOLE HOLE WITH WITH 0.265[6.73]
1.375 34.93 1.375[34.93
.35099[8.89] [8.89] xx 82° 82 C'SINK C'SINK 0.350 (4) HOLES (4) HOLES
.098 2.50 .098[2.50]
.25 6.4 .25[6.4]
.201 5.11] C.D.S. C.D.S. PIN PIN 0.201[5.11 BOTH ENDS BOTH ENDS SPUN SPUN
.85 21.6 ] .85[21.6
1
.09 2.2 .09[2.2] OFFSET OFFSET
.102 2.60 L.102[2.60]
Strap Strap Hasp Hasp and and Staple Staple (Steel) (Steel) Part Number Part Number
2876 2876
Finish Finish
■
zinc plated zinc plated
2.00 50.8 2.00[50.8]
3.91 99.2 ] 3.91[99.2
0 0
1
1.88 47.8 1.88[47.8]
1.63 41.3 1.63[41.3]
0 1.38 34.9 1.38[34.9]
.69 17.5 .69[17.5]
5.66 143.7 5.66[143.7]
.375 9.53 .375[9.53]-
1.25 31.8
.300 7.62 HOLE HOLE WITH WITH 0 300[7.62] .350[8.89] [8.89] xx 82° 82 C'SINK C'SINK 0 350 (4) PLACES (4) PLACES
.25 6.4 0.25[6.4]
1.43 36.3 1.43[36.3]
.098 2.50 .098[2.50]
.266 6.75 HOLE HOLE WITH WITH O.266[6.75] .375[9.52] [9.52] xx 82° 82 C'SINK C'SINK 0.375 (4) PLACES (4) PLACES
.250 6.35 C.D.S. C.D.S. PIN PIN 0.250[6.35] BOTH ENDS BOTH ENDS SPUN SPUN
.94 23.9 .94[23.9] .098 2.50 .098[2.50]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
293
Hasps & Staples
SPrgeRil PP"IFIC
u") PRODUCTS
300 Series Series Stainless 300 Stainless Steel Steel Marine Marine Hasp Hasp and and Swivel Swivel Staple Staple 2.85 225 [72.4]
__.. . ...-- 1.13 1.13
__,\
[28.7]
4• ,
Part Number M Part NumJ
Description Description
Material Thickness Thickness Material
Finish Finish
Screw Screw Size Size
M0827 0827
hasp hasp
.060 [1.52] [1.52] .060
electropolished electropolished
#8 #8
M0627 M0627
swivel swivel staple staple
.060 [1.52] [1.52] .060
electropolished electropolished
#8 #8
i
A,
r\ Ø.125 [3.18] 0.125 [3.18] pin pin
\ r
Ø.310 [7.87] [7.87] 0.310 "4-
44 1.17 [29.7]
1.08 1.08 [27.4]
300 Series Series Stainless Stainless Steel Hasps 300 Steel Hasps
part part no. no. 2708 2708
Part Part Number Number
Material Material Thickness Thickness
Finish Finish
A A
B B
C C
D D
E E
F F
Screw Screw Size Size
Mounting Mounting Holes Holes
2702 2702
.075 [1.91] [1.91] .075
tumbled tumbled deburred deburred
2.53 2.53 [64.3] [643]
1.12 1.12 [28.5] [28.5]
1.00 1.00 [25.4] [25.4]
.312 312 [7.92] [7.92]
1.00 1.00 [25.4] [25.4]
.25 .25 [6.4] [6.4]
#6 #6
3 3
2704 2704
.075 [1.91] [1.91] .075
tumbled tumbled deburred deburred
3.50 3.50 [88.9] [88.9]
1.31 131 [33.3] [333]
1.50 1.50 [38.1] [38.1]
.375 375 [9.53] [9.53]
1.25 1.25 [31.8] [31.8]
.25 .25 [6.4] [6.4]
#8 #8
3 3
2706 2706
.098 [2.49] [2.49] .098
tumbled tumbled deburred deburred
4.50 4.50 [114.3] [1143]
2.22 2.22 [56.4] [56.4]
1.50 1.50 [38.1] [38.1]
.375 375 [9.53] [9.53]
1.25 1.25 [31.8] [31.8]
.25 .25 [6.4] [6.4]
#8 #8
3 3
2708 2708
.104 [2.64] [2.64] .104
tumbled tumbled deburred deburred
6.00 6.00 [152.4] [152.4]
2.75 2.75 [69.9] [69.9]
1.88 1.88 [47.6] [47.6]
.375 375 [9.53] [9.53]
1.25 1.25 [31.8] [31.8]
.31 31 [7.9] [7.9]
#10 #10
5 5
tifr
B
part part no. no. 2702 2702
A
C
D
E MATERIAL MATERIAL THICKNESS THICKNESS
.24[6.2] 6.2 -.24
300 Series Series Stainless Stainless Steel 300 Steel Staples Staples Small Small Staple Staple Part Number Part Number
Material Thickness Thickness Material
Finish Finish
Wire Dia. Wire Dia.
.072 [1.83] [1.83] .072
tumbled deburred deburred tumbled
.125 [3.18] [3.18] .125
272SS 27255
1.00 25.4 h.-.I 1.00[25.4]
Screw Size Screw Sizes #6 #6
.70 17.8 .70[17.8]
O [10 1.12 28.4 1.12[28.4]
.77 19.6 .77[19.6]
.52 13.2 .52[13.2]
OU Large Staple Large Staple Part Number Part Number
Material Thickness Thickness Material
Finish Finish
.072 [1.83] [1.83] .072
tumbled deburred deburred tumbled
274SS 27455 1.50 38.1
.87 22.2 .87[22.2]
O
0
1.50 38.1
O 294 294
Download Download 31:Immo @@www.spep.com www.spep.com
II .94 23.9 3.9]
0 Request Info
.56 14.3 .56[14.3]
i
1-800-453-1692 www.aboveboardelectronics.com
Wire Dia.IMMEcrew.= Dia. Screw Size Wire .187 [4.75] [4.75] .187
#8 #8
Hinges and IndustrialHardiAp-rp Hardware Hinges and industrial
Plate Plate Thickness Thickness
Staple Staple Thickness Thickness
280S 2805
.079 .079 [2.01] [2.01]
.25 .25
280T-01* 280T-01* 280U 280U
Screw Screw Size Size
Finish Finish
A A
B
C
[6.35] [635]
1.63 1.63 [41.4] [41.4]
1.36 136 [34.5] [34.5]
1.13 1.13 [28.7] [28.7]
#7 #7
.039 .039 [1.00] [1.00]
.16 .16 [4.06] [4.06]
1.00 1.00 [25.4] [25.4]
.69 .69 [17.5] [17.5]
.69 .69 [17.5] [17.5]
#4 #4
zinc zinc plated plated
.067 .067 [1.70] [1.70]
.16 .16 [4.06] [4.06]
1.20 1.20 [30.5] [30.5]
1.08 1.08 [27.4] [27.4]
.90 .90 [22.9] [22.9]
#6 #6
zinc zinc plated plated
C
zinc zinc plated plated
B
A
Hasps & Staples
Standard Stamped Staples Staples (Steel) Standard Stamped (Steel) Part Part Number Number
Large Stamped Large Stamped Staple Staple (Steel) (Steel) Part Part Number Number
281U 281U
Plate Plate Thickness Thickness
Staple Dia./ Staple DiaJ Thickness Thickness
.152 .152
.365 365 [9.27] [9.27]
[3.86] [3.86]
A A
B B
C C
D D
2.26 2.26
1.86 1.86 [47.2] [47.2]
1.57 1.57 [39.9] [39.9]
.85 .85
[57.4] [57.4]
Screw Screw Size Size #9 #9
[21.6] [21.6]
Finish Finish
C
zinc zinc
D
plated plated
B
A
Swivel Swivel Staple Staple (Steel) (Steel) Part Part Number Number
Plate Plate Thickness Thickness .079 .079
283S 2835
[2.00] [2.00]
Staple Dia./ Staple DiaJ Thickness Thickness 1.77 [4.50] 1.77 [4.50]
A A
B B
C C
D D
1.50 1.50
1.50 1.50 [38.1] [38.1]
1.06 1.06 [26.9] [26.9]
.63 .63
[38.1] [38.1]
Screw Screw Size Size #7 #7
[16.0] [16.0]
Finish Finish
C
zinc zinc
D
plated plated
B
A
Single Padlock Type Single Point Point Padlock Type Hasp Hasp Latch Latch (Steel) (Steel)
M 295
Part art Number Number
295
Material Material
Finish Finish
steel steel
zinc plated zinc plated
concealedball balland andspring springprevent preventhasp hasp disengaging disengaging from from staple staple when padlock is I concealed when padlock is not not attached attached accommodateslock lock shackles shackles of [7.92] I accommodates of up up to to Ø.312 0312 [7.92] fordoors doors up up to to 38 .38 [9.5] [9.5] thick I for thick
CAM CAM
.375 9.53 MAX. .375[9.53]MAX. PANEL THICKNESS THICKNESS PANEL
1.69 42.9 C'SUNK C'SUNK FOR FOR #10 F.H.S. #10 F.H.S. (2) HOLES HOLES (2)
1.45 36.8 1.45[36.8]
CONCEALED CONCEALED BALL BALL & & SPRING SPRING
2.88 73.2 2.88[73.2]
HASP STAPLE STAPLE
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554MIN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
295 295
Cam Locks Locks Cam
90° HEAD DIA.
SCREW AND AND NUT NUT NOT SCREW NO SHOWN FOR FOR CLARITY CLARITY SHOWN .640
.64.640 16.26
[16.26] [16.26]
.76 19.30 Ø.760 [19.30] 0.760 [19.30]
• key key removable removable in in both both locked locked and and unlocked unlocked positions positions [21.8] == plated • Ø.86 0.86 [21.8] plated head head [22.6] == stainless • Ø.89 0.89 [22.6] stainless steel steel scalped scalped head head
Part Part Number Number
Metal Metal or Plastic Metal oror Plastic Plastic
.75 19.05 Ø.750 [19.05] 0.750 [19.05]
Wood Wood Wood MOUNTING DIMENSIONS
recommended cut-outfor for cam cam locks, locks, recommended cut-out unless unless otherwise otherwise illustrated. illustrated.
Length L Length L
Key Key Code Code
Finish Finish
Body Body Mounting Mounting
Cam Fastener Cam Fastener
Rotation Rotation
K04BSS---001 KO4BSS---001
11/32 [9] 11/32 [9]
CH751 CH751
stainless steel stainless steel face face
hex hex nut nut
spun-on spun-on
90° 90°
K04BSS---002 KO4BSS---002
11/32 [9] 11/32 [9]
C415A C415A
stainless steel stainless steel face face
hex hex nut nut
spun-on spun-on
90° 90°
K04ESS---001 KO4ESS---001
7/16 [11] 7/16 [11]
CH751 CH751
stainless steel stainless steel face face
hex hex nut nut
spun-on spun-on
90° 90°
K04ESS---002 KO4ESS---002
7/16 [11] 7/16 [11]
C415A C415A
stainless steel stainless steel face face
hex hex nut nut
spun-on spun-on
90° 90°
K04ICP---001^ « K041CP---001A «
5/8 [16] 5/8 [16]
C413A C413A
chrome chrome
hex hex nut nut
screw-on screw-on
90° 90°
K04IBP---001^ K041BP---001 A «a
5/8 [16] 5/8 [16]
C413A C413A
bright bright brass brass
hex hex nut nut
screw-on screw-on
90° 90°
K04ISS K04155 ---001 ---001
5/8 [16] 5/8 [16]
CH751 CH751
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
K04ISS---002 K04155---002
5/8 [16] 5/8 [16]
C415A C415A
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
K04ISS---003 K04155---003
5/8 [16] 5/8 [16]
CAT60 CAT60
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
K04ISS---004*^ K04I55---004*A
5/8 [16] 5/8 [16]
AH1 AH1
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90°/180° 900/180°
K04ISS---005*^ K04ISS---005m
5/8 [16] 5/8 [16]
AH2 AH2
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90°/180° 900/180°
K04ISS---006*^ K04I55---006*A
5/8 [16] 5/8 [16]
AH3 AH3
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90°/180° 900/180°
K04ISS---007*^ K04ISS---007m
5/8 [16] 5/8 [16]
AH4 AH4
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90°/180° 900/180°
K04OSS---001 KO4OSS---001
7/8 [22] 7/8 [22]
CH751 CH751
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
K04OSS---002 KO4OSS---002
7/8 [22] 7/8 [22]
C415A C415A
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
K04TCP---001^ K04TCP---001A «
1-1/8 [29] 1-1/8 [29]
C413A C413A
chrome chrome
hex hex nut nut
screw-on screw-on
90° 90°
K04TBP---001^ « K04TBP---001 A x
1-1/8 [29] 1-1/8 [29]
C413A C413A
bright bright brass brass
hex hex nut nut
screw-on screw-on
90° 90°
K04TSS---001 KO4TSS---001
1-1/8 [29] 1-1/8 [29]
CH751 CH751
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
K04TSS---002 KO4TSS---002
1-1/8 [29] 1-1/8 [29]
C415A C415A
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
K04TSS---003* K04TSS---003*
1-1/8 [29] 1-1/8 [29]
AH1 AH1
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90°/180° 900/180°
K04TSS---004* K04TSS---004*
1-1/8 [29] 1-1/8 [29]
AH2 AH2
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90°/180° 900/180°
K04TSS---005* K04TSS---005*
1-1/8 [29] 1-1/8 [29]
AH3 AH3
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90°/180° 900/180°
K04TSS---006 KO4TSS---006
1-1/8 [29] 1-1/8 [29]
C413A C413A
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
K04YSS---001 KO4YSS---001
1-3/8 [35] 1-3/8 [35]
CH751 CH751
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
K04YSS---002 KO4YSS---002
1-3/8 [35] 1-3/8 [35]
C415A C415A
stainless steel stainless steel face face
hex hex nut nut
screw-on screw-on
90° 90°
NOTE: cam is not (see pages pages 306-307 306-307 for for cam I NOTE: cam is not included included (see cam selection) selection)
material: die die cast cast zinc zinc I material: locks have have (5) (5) wafers I locks wafers key code code stamped stampedon onkeys keys and and face face I key includes: I includes: cam mounting mounting screw screw I cam body nut nut I body (2) keys keys per per lock lock I (2)
296
9mm 9mm SQ. SQ.
L L
XXXX
Cam Locks &_ Accessories
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Request Info
Download .7)DmoDELs@ @www.spep.com www.spep.com Download
^ on face face A key key code code is is not not stamped stamped on includes includes trim trim ring ring locks include include aa 90° 90° and 180° stop ** locks and 180° stop washer. washer. (locks inside aa sealed (locks are arepackaged packaged unassembled unassembled inside sealed polybag) polybag) 4( «
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Industrial Hardware Hardware Hinges ind Industrial
K09ICP---001 K091CP---001
Length Length
Finish Finish
Body Body Mounting Mounting
Rotation Rotation
Cam Cam Style Style
hex hex nut nut
90° CW 90°CW
any, see any, see pages pages 236-237 236-237
5/8 chrome 5/8[16] [16] chrome
Cam Cam Stock Fastener Stock Fastener screw-on screw-on
stock stock
NOTE: cam cam is I NOTE: is not not included included contactsales sales for for custom I contact custom options options material: die die cast cast zinc zinc I material: .640 16.25
M SQ.
.63 16.1
9MM SQ.
.640 16.25
90° .87 22.0
AND NUT NOT FOR CLARITY
SCREW AND NUT NOT SHOWN FOR CLARITY
.760 19.30 MOUNTING DIMENSIONS
Cam Locks & Accessories
Slotted Cam Latch Latch Slotted Cam Base Part Base Part Number Number
.76
MOUNTING
Thumb-turn Cam Cam Latch Latch Thumb-turn Base Part Base Part Number Number
Length Length
Finish Finish
Body Body Mounting Mounting
Rotation Rotation
Cam Cam Style Style
Cam Cam Fastener Fastener
Stock Stock
K10ICP---001 K10ICP---001
5/8 5/8 [16] [16]
chrome chrome
hex hex nut nut
90° 90°
any, see any, see pages pages 236-237 236-237
screw-on screw-on
stock stock
K10OCP---001 K1 00CP---001
7/8 7/8 [22] [22]
chrome chrome
hex hex nut nut
90° 90°
any, see any, see pages pages 236-237 236-237
screw-on screw-on
stock stock
K10TCP---001 K1 OTCP---001
1-1/8 1-1/8 [29] [29]
chrome chrome
hex hex nut nut
90° 90°
any, see any, see pages pages 236-237 236-237
screw-on screw-on
stock stock
NOTE: cam cam is I NOTE: is not not included included contactsales sales for for custom I contact custom options options material: die die cast cast zinc zinc I material: .64 16.3
M SQ.
L
9MM SQ.
.64 16.3
90° .84 21.5
AND NUT NOT FOR CLARITY
SCREW AND NUT NOT SHOWN FOR CLARITY
.760 19.30 MOUNTING DIMENSIONS
MOUN
Thumb-turn Cam Cam Latch Latch Thumb-turn Cam Cam Fastener Fastener
Finish Finish
Body Body Mounting Mounting
Rotation Rotation
Cam Style Cam Style
5/8 5/8
chrome chrome
hex hex nut nut
90° 90°
any, see any, see pages pages 306-307 306-307
screw-on stock stock screw-on
5/8 5/8
black black electro-plated electro-plated
hex hex nut nut
90° 90°
any, see any, see pages pages 306-307 306-307
screw-on stock stock screw-on
Base Part Base Part Number Number
Length Length
K50ICP---001 K50ICP---001 K50IBK---001 K50IBK---001
L
Stock Stock
NOTE: cam cam is I NOTE: is not not included included contactsales sales for for custom I contact custom options options material: die die cast cast zinc zinc I material:
MM SQ.
REW AND NUT NOT OWN FOR CLARITY
.64 16.3
L
1.02 25.8 90° .760 19.3 MOUNTING DIMENSIONS Request Info
1-800-453-1692 www.aboveboardelectronics.com
9MM SQ.
.64 16.
.84 21.4
SCREW AND NUT NOT SHOWN FOR CLARITY
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
MOU
297 297
Cam Locks &_ Accessories
SPrgeRS -MCIFIC ENGINEERING AND PRODUCTS
Bellcore Style Cam Latch Bellcore Style Cam Latch Base Part Base Part Number Number
Body Body Mounting Mounting
Length Length L
Finish Finish
5/8 5/8 [16] [16]
black black electro-painted electro-painted
Rotation Rotation
Cam Cam Fastener Fastener
Cam Style Cam Style
Stock Stock
for additional for additional
K40ICP01 K401CP01
hex nut hex nut
cam cam styles styles see see pages pages 306-307 306-307
90° 90°
screw-on stock screw-on stock
material:die diecast cast zinc zinc I material: hookcam cam included included I hook
.63 [16.0] .63 [16.0]
-
.63 [16.0] .63 [16.0] .64 16.3 .64 [16.3]
9MM SQ.
L
Hex H ex Tool Tool Key Key
9MM 9MM SQ. SQ.
90° 90°
1.02 25.8
.41i .13 .13[3.2] [3.2] dia. dia. hole hole
1.00 [25.4] 1.00 [25.4] .84 21.4
90°
Qa
Ø.85 [21.6] [21.6] 0.85
5/16 [8] HEX x 5/16 [8] HEX x .13 .13 [3.3] [3.3] DEEP DEEP WITH PIN PIN ON WITH ON CENTER CENTER
part 392-K partnumber number 392-K ►sold sold separately separately
SCREW AND NUT NOT SCREW SCREW AND AND NUT NUT NOT NOT SHOWN FOR CLARITY SHOWN FOR CLARITY CLARITY SHOWN FOR
.760 19.3 L0.760[19.3] MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Allen Wrench Wrench Cam Cam Lock Lock Allen Base Base Part Part Number Number
Length Length
K06I K061
Keying Keying 1/4 [6.4] [6.4] 1/4
.63 [16] .63 [16]
Allen Wrench Allen Wrench
Options Options Finish Finish chrome chrome
Body Mounting Body Mounting
Rotation Rotation
Cam Fastener Cam Fastener
hex hex nut nut or or spring spring clip clip
any, any, see see page 305 page .)
screw-on screw-on or or spun-on spun-on
NOTE: cam I NOTE: cam is is not not included included seepage page306-307 306-307 for for cam cam selection I see selection keyavailable availableseparately separately as as part I key part no. no. KB105 KB105 9MM SQ. material:die diecast cast zinc zincL I material: 9MM 9MM SQ. SQ.
.63 [16.0] [16.0] .63 1.02 25.8
.64 [16.3] 16.3 .64
.84 21.4
Ø.88 [22.3] [22.3] 0.88
90°
SCREW AND NUT NOT SHOWN FOR CLARITY SCREW AND SCREW AND NUT NUT NOT NOT SHOWN SHOWN FOR FOR CLARITY CLARITY
.760 [19.3] 19.3 0.760 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
Padlockable Thumb-turn Cam Latch Latch Padlockable Thumb-turn Cam Base Part Base Part Number Number
Length Length L
Finish Finish
Body Body Mounting Mounting
Rotation Rotation
black black powder coated powder coated
hex nut hex nut
90° 90°
Cam Style Cam Style
Cam Cam Fastener Fastener
Stock Stock
includes cam. cam. includes
K17LBK01 K1 7LBK01
20mm 20mm
receiver receiver only accepts accepts only
screw-on stock screw-on stock
8mm cams cams 8mm material:die diecast cast zinc zinc I material:
HOLES FOR FOR 1/4!' 1/4" PADLOCK HOLES PADLOCK
TOP VIEW TOP VIEW .64 16.3
.55 13.9
.59 [15.0] 15.0 .59
2.00 .079 [2.00] .079
.64 [16.3] 16.3 .64
1.13 28.6 1.02 [26.0] 26.0 1.02
.760 19.3 MOUNTING DIMENSIONS
298
Download www.spep.com Download 3DmoDELs @ @ www.spep.com
.80 [20.3] 20.3 .80 LEFT SIDE SIDE VIEW LEFT VIEW
:4)
1.81 46.0 FRONT VIEW VIEW FRONT Request Info
.64 16.2 .64 [16.2]
.760 [19.3] 19.3 0.760
RIGHT SIDE MOUNTINGDIMENSIONS DIMENSIONS RIGHT SIDE VIEW VIEW MOUNTING 1-800-453-1692 www.aboveboardelectronics.com
LE
Key Code Key Code
K04JSS---001 KO4JSS---001
.63 [16] .63 [16]
K04JSS---002 KO4JSS---002
.63 [16] .63 [16]
Finish Finish
Body Mounting Body Mounting
Rotation Rotation
Cam Fastener Cam Fastener
CH751 CH751
chrome chrome
C415A C415A
chrome chrome
hex hex nut nut or or spring clip spring clip
any, any, see see page page 305 305
screw-on or screw-on or spun-on spun-on
NOTE: cam cam is I NOTE: is not not included included seepage page306-307 306-307 for for9MM cam selection I see cam selection .63 16.0 SQ.gasket, includesinternal internalo-ring, o-ring, gasket, and and dust I includes dust shutter shutter material:die diecast cast zinc zinc I material:
.64 16.3 64 [16.3]
.85 [21.6] 21.6 .85
-
.85 21.6
.64
9MM SQ. SQ.
.63 [16.0] 16.0 .63
V :
Length Length
Options Options
Cam Locks & Accessories
Sealed Cam Lock Lock Sealed Cam Base Part Base Part Number Number
• al •1 J
Hinges and Hinges and Industrial Industrial Hardware Hardware
.760 19.3
SCREW AND NUT NOT SHOWN FOR CLARITY
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
MOUNTING DIMENS
Spring Loaded Loaded Cam Cam Latch Spring Latch Base Part Base Part Number Number
K40YBK01 K4OYBK01
Length Length
Material Material
1.42 [36.1] 1.42 [36.1]
die cast zinc die cast zinc
Options Options Finish Finish Codes Codes
Cam Fastener Cam Fastener
BP BP
screw-on screw-on
- IJ 0
.760 19.30 0.760[19.30]
SCREW AND NUT NOT SHOWN FOR CLARITY
hextool toolkey key (part (part no. no. 392-K) I hex 392-K) see see page page 298 298
1.42 1.42 [36.1] [36.1]
.64 [16.3] 16.3 .64
.15 [3.8]
1.25 [31.8]
1.00 [25.4] [25.4] 1.00
90° 90° SPRING LOADED SPRING LOADED ROTATION ROTATION
Ø.85 [21.6] 0.85 [21.6]
_s_iiimminffillommen.
1.15 [29.2] [29.2] 1.15
UT NOT LARITY
patented Ø.120 [3.05] [3.05] 0.120 PIN PIN
.760 [19.3] 19.3 0.760 MOUNTING DIMENSIONS DIMENSIONS MOUNTING
.63 [16.0] [16.0] .63
1.25 [31.8] 1.25 [31.8]
.098 [2.50] [2.50] .098
.335 [8.51] .335 [8.51] HEX HEX
Snap-in Cam Cam Lock Lock Snap-in Base Part Base Part Number Number
Length Length
K30L K3OL
.78 [20] .78 [20]
Options Options Finish Finish
Body Mounting Body Mounting
Rotation Rotation
Cam Fastener Cam Fastener
chrome chrome
built-in spring clip built-in spring clip
any, see any, see page page 305
screw-on screw-on or or spun-on spun-on
NOTE: cam cam is I NOTE: is not not included included .64 [16.3] 16.3 .64 9MM SQ. seepage page306-307 306-307 for cam cam selection I see for selection recommendedmaterial material thickness thickness for I recommended for mountingcam camlock lockisis.025 .025 [.64] [.64] to to .050 .050 [1.27] mounting [1.27] material:die diecast cast zinc zinc I material:
L
8MM 8MM SQ. SQ.
.78 [19.8] .78 [19.8] -
Ø.86 [21.8] 0.86 [21.8] SCREW AND NUT NOT SHOWN FOR CLARITY
.760 [19.3] 19.3 0.760
SCREW AND SCREW AND NUT NUT NOT NOT SHOWN FOR FOR CLARITY SHOWN CLARITY
MOUNTING DIMENSIONS DIMENSIONS MOUNTING
air Part No. Part No.
Finish Finish
Material Material
K03PCP09 KO3PCP09
Cam Lock Cam Lock with with Capped Capped Cylinder Cylinder
die cast cast zinc die zinc
Lock Lock
Housing Housing
mill mill
chrome chrome plated plated
capisis304SS 304SS with I cap with barrel barrel polished polished finish finish includes cam cam I includes 16.3 .64 [16.3]
.64 16.3 .68 [17.2] 17.2 GRIP
.30 [7.6] 7.6
63 16.0
90° CW ROTATION
45°
3.20 .126 [3.20] THICK CAM
-
.63 16.0 45°
19.0 .75 [19.0] .795 20.20 .20 5.0
Request Info
.7
M20 TH D. THD.
MOUNTING DIMENSIONS
34.0 1.34 [34.0]
1-800-453-1692 www.aboveboardelectronics.com
32.4 1.27 32.4]
.20 5.0
MOUNTING DIMENSION
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
299
Cam Locks &_ Accessories
SIERRA PACIFY'
IGINEERING AND PRODUCTS
Mini Mini Tubular Tubular Push Push Locks Locks
PIN PIN TUMBLERS TUMBLERS
LENGTH LENGTH
PUCH-BUTTON PUCH-BUTTON WHEN UNLOCKED UNLOCKED WHEN
.59 [15.0] 15.0 0 .69
•
.23 5.8 BOLT BOLT .23[5.8] WHEN LOCKED LOCKED WHEN
.41 10.5 .41 [10.5] FLAT-FLAT FLAT-FLAT
Part Part Number Number
Material Material
Finish Finish
Pin Pin Tumblers Tumblers
Length Length
K206CP01 K206C P01
die zinc die cast cast zinc
chrome chrome
4 4 pins pins
10.0 10.0
K206CP02 K206C PO2
die zinc die cast cast zinc
chrome chrome
77 pins pins
12.0 12.0
360° rotation rotation I 360° usedfor for ad ad or or display display cases I used cases .48 12.3
.47 12.0 0:11[13:8]
1 1'1144i:1 .20 [5.0] 5.0 H O.20
1111911111 .43 11.0 .42 10.7 MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Brass Cam LockLock I. BrassTubular Tubular Cam Part Part Number Number
Material Material
Finish Finish
brass brass
chrome plated chrome plated
K03PCP04 KO3PCP04
1.77 45.0 1.77 [45.0] 90° ROTATION
includes(2) (2) steel, steel, nickel nickel plated platedringed ringedkeys keyswith withkey key code codeK1161 K1161 I includes bodynut nutand andcam cammounting mountingnut nutare aresteel steelwith withzinc zinc plated plated finish finish I body key removable removable in in locked locked position position only only I key camnot notincluded, included, see see page page 301 301 for for cam cam selection selection I cam
.62 15.8
29.7 1.17 1.17 [29.7]
.21 5.4
.63 16.0
.768 [19.50] 19.50 93.768
11111111111111111111111111 ! .,
111111111110 .21 5.3 21 [5.3]
.87 22.0
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Brass Brass Tubular Tubular Cam Cam Lock Lock Part Part Number Number
K03PCP05 KO3PCP05
0.93 .93 [23.7] 23.7 0.-
.62 15.8
.69 17.4 .69 [17.4]
90° ROTATION
.21 5.4
Finish Finish
brass brass
chrome chrome plated plated
includes(2) (2) steel, steel, nickel nickel plated ringed tubular tubular keys keys with with key I includes plated ringed key code code 1127B 1127B bodynut nutand andcam cammounting mountingnut nutare aresteel steelwith withzinc zinc plated plated finish finish I body camnot notincluded, included, see see page page 301 301 for for cam cam selection selection I cam .63 16.0
11111111 i 1111111111' a WI lb is 1.
Material Material
.768 [19.50] 19.50 0.768
Ilw al
ll Jo. Ft . I .25 [6.3] 6.3 .25
.87 22.0
MOUNTING MOUNTING DIMENSIONS DIMENSIONS
Brass Brass Tubular Tubular Cam Cam Lock Lock
CD
Part Part Number Number
Material Material
Finish Finish
brass brass
chrome plated chrome plated
K03PCP06 KO3PC PO6
.62 15.8 .62 [15 8]
1.07 27.3 1.07 [27 3] 90° ROTATION
.87 22.0
.43 11.0 .43[11.0]
Mr
includes(2) (2) steel, steel, nickel nickel plated keys I includes plated ringed ringed tubular tubular keys bodynut nutand andcam cammounting mountingnut nutare aresteel steelwith withzinc zinc plated plated finish finish I body key removable removable in in locked locked position position only only I key shortbody bodyfor for limited limited spaces I short spaces camnot notincluded, included, see see page page 301 301 for for cam cam selection selection I cam
r.21 .21 [5.4] 5.4 .63 16.0
.768 [19.50] 19.50 0.768
.25 [6.3] 6.3 .25 MOUNTING MOUNTING DIMENSIONS DIMENSIONS
300
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Material Material
Finish Finish
brass brass
chrome chrome plated plated
I key keyremovable removable in in locked locked position position only only camnot notincluded, included,see see page page 301 301 for for cam cam selection I cam selection .63 16.0
.768 19.50 0.768[19.50]
.69 [17.4] 17.4 .69
90° CW CW 90° ROTATION ROTATION
5.4 .21 [5.4] .21
-
.62 15.8 .62 [15.8] MOUNTING DIMENSIONS MOUNTING DIMENSIONS
1.18 [30.0] 30.0 01.18
.31 7.8
Cams Cams Part Part Number Number
J
V :
1.39 35.2 KEY REMOVABLE REMOVABLE ON KEY ON THIS THIS POSITION POSITION ONLY ONLY
Material Material
Finish Finish
K03-CAM01 K03-CAMO1
steel steel
zinc plated zinc plated
K03-CAM02 K03-CAMO2
steel steel
zinc plated zinc plated
K03-CAM03 K03-CAMO3
steel steel
zinc plated zinc plated
K03-CAM04 K03-CAMO4
steel steel
zinc plated zinc plated
K03-CAM05 K03-CAMO5
steel steel
zinc plated zinc plated
K03-CAM06 K03-CAMO6
steel steel
zinc plated zinc plated
K03-CAM07 K03-CAMO7
steel steel
zinc plated zinc plated
.75 19.0
.75 19.0 .75 [19.0]
1.36 34.5 1.36 [34.5]
- IJ 0
K03PCP08 KO3PCP08
Cam Locks & Accessories
Cam Lock Cam Lock Part Number Part Number
• al •1
Hinges and Hinges and Industrial Industrial Hardware Hardware
.75 19.0
3.20 .126 [3.20] .126
.75 19.0 .75 19.0 .75[19.0]
5.50 .217 [5.50] .217 ALL CAMS CAMS ALL
1.03 26.2
.81 20.6
7.21 .284 .284 [7.21] ALL CAMS CAMS ALL
.126 3.20
.126 3.20
K03-CAM01 K03-CAMO1
K03-CAM03 K03-CAMO3
K03-CAM02 K03-CAMO2
.75 19.0
.71 18.0
(2) PUNCHES, PUNCHES, (2) ONE OF ONE OF EACH EACH ORIENTATION ORIENTATION
.126 3.20
1.36 34.5 1.02 26.0
.27 6.8 .27 [6.8] K03-CAM04 K03-CAMO4
SAME AS AS K03-CAMO5 K03-CAM05 SAME EXCEPT FOR FOR PUNCH EXCEPT PUNCH ORIENTATION ORIENTATION
.091 [2.30] 2.30 .091 K03-CAM05 K03-CAMO5
K03-CAM07 K03-CAMO7
K03-CAM06 K03-CAMO6
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
301 301
Cam Locks &_ Accessories
SIERRIP
ENGINEERING AND PRODUCTS
Cam Locks Locks Cam Part Part Number Number .50 [12.8] 12.8 .50
Material Material
Finish Finish
K201CP K201 CP
die cast zinc die cast zinc
chrome chrome
K201BK K201 BK
die cast zinc die cast zinc
black black textured textured powder coat powder coat
.54 54 13.7 [13.7]H.55 14.0 55 [14.0] SQ. so.
.63 [16.0] 16.0 0.63 .94 24.0
keycode code 2233 2233 I key includes cam cam I includes
/-` a .87 [22.0] 22.0 0.87
MOUNTING DIMENSIONS MOUNTING DIMENSIONS
Push and Cam Lock Push and Turn Turn Knob Knob Cam Lock Part Number Part Number
K05ICP50 K051CP50
Material Material
Finish Finish
die cast zinc die cast zinc
chrome plated chrome plated
Material Material
Finish Finish
die cast zinc die cast zinc
nickel plated nickel plated
includes cam cam I includes .59 15.0
gat
.63 16.0 .63[16.0] .64 16.3
.60 15.3
.0787 2.000
1.02 26.0 .87 22.0
.70 17.8
.709 18.00
.19 4.8
FRONT VIEW FRONT VIEW
RIGHT SIDE RIGHT SIDE VIEW VIEW
MOUNTING DIMENSIONS DIMENSIONS MOUNTING PANEL THICKNESS THICKNESS PANEL FOR .16[4.0] FOR .04[1.0] 04[10] -- ARCO]
Thumb Turn Turn Cam Cam Lock Lock Thumb Part Number Part Number
K21TNP01 K21TNP01 includes cam cam I includes
.94 [ 24.0 ]
.642 16.30
1.92 48.7
.87 22.0
.748 [19.00] 19.00 0.748
1.14 29.0
.079 2.00 THK.
.63 16.0
1.12 28.4 GRIP
.56 14.3
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW
MOUNTING DIMENSIONS MOUNTING DIMENSIONS FOR .04 FOR .04 [[ 1.0 1.0 ]] -.79 -.79 [[ 20.0 20.0 ]] PANEL THICKNESS THICKNESS PANEL
Cam Lock Key Cam Lock with with Handle Handle Key Part Number Part Number
K03PCP100 KO3PCP1
Material Material
Finish Finish
die cast zinc die cast zinc
chrome chrome plated plated
handlekey keymaterial: material: die die cast cast zinc I handle zinc with with nickel nickel plated plated finish finish includes cam cam I includes keyremovable removable in in locked locked position I key position only only 13.5 .53 [13.5] GRIP .22 [5.5] 5.5 .22
.71 [18.0] 18.0 0.71
2.000 _._ .0787 [2.000] THICK CAM
13.8 .54 [13.8]
.51 [13.0] 13.0 .51
1011 11i 80° CW ROTATION .91 23.0 91 [23.0]
302 302
Download www.spep.com Download3DmoDELs @ @ www.spep.com
80° CCW ROTATION
.16 4.0
07 27.3 [27.3] -.1.07
KEY REMOVABLE IN IN THIS LOCATION ONLY
FRONT VIEW
RIGHT SIDE VIEW
REAR VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
brass brass & & lacquer lacquer
5902 5902
die cast zinc die cast zinc
chrome chrome
5903 5903
die cast zinc die cast zinc
black black e-coat e-coat
1.63 1.63 [41.4]
hole is is Ø.406" ►padlock padlock hole 0.406" kit includes: includes: ►polybagged polybagged kit ►cylinder cylinder offset cam cam I offset ►nylon nylon lock lock nut nut body nut nut I body bodywasher washer I body
c’sunk c'sunk for for aa #4 #4 FHS
V :
Finish Finish
die cast zinc die cast zinc
If '111 ill. Ac- 1.34 [33.9] [33.9]
VIEW A VIEW A 6.8 .27 [6.8]
.75 [19.1] 19.1 .75
opened position position opened
OFFSET OFFSET
.098 [2.50] 2.50 .098 1.31 33.3 1 31 [33.3]
2.06 [52.5] 52.5 2.06 REF. REF.
IMOM
-
Part Part Number Number
- IJ 0
Material Material
5901 5901
• al •1 J
Padlocking Cylinder Cylinder Latches Latches Padlocking
Cam Locks & Accessories
CREW
Hinges and Hinges ans Industrial •ctrial Hardware bfrrdWare
15111111111111111111111I
°.413 10.49 (2) HOLES .386 [90 9.80 8.09] (2) HOLES
1.00 [25.4] 25.4 —.11.00
VIEW A MEALS
1111111
1.31 [33.3]
aumuommt ut
1.83 46.6 1.83 [46.6]
1
5/16-24 5/16-24 THREAD THREAD
1.01 25.77] 1.01 [25
1.33 33.9 1.33[33.9] RIGHT SIDE SIDE VIEW VIEW RIGHT
FRONT VIEW FRONT
closed position closed position
Part Number Part Number
K04OCH50 KO4OCH50
Padlockable Cam Lock 411) Padlockable Cam Lock
Material Material
Finish Finish
die cast zinc die cast zinc
chrome chrome plated plated
accepts up up to to 1/4!' 1/4" padlock padlock I accepts includescam, cam, m4 m4 mounting mounting screw screw and I includes and nut nut
.728 18.50 0.728[18.50]
.650 [16.50] 16.50 .650 .661 [16.80] 16.80 .661
VIEW A•-A VIEW
► 1.46 1.46 [37.0] 37.0
.79 [[ 20.0 20.0 ]] .79 GRIP GRIP
1.04 [ 26.5 ]
.650 16.
.69 [[ 17.5 17.5 ]] .69 1.06 27.0
.177 [4.50] 4.50 0.177
.2756 [7.000] 7.000 0.2756 (2) HOLES HOLES (2)
MOUNTING DIMENSIONS DIMENSIONS MOUNTING FOR .04 [ 5.0 ]] FOR .04 [[ 1.0 1.0] ]-.20 -.20[5.0 PANEL THICKNESS THICKNESS PANEL
M4 SCREW .94 [24.0] 24.0 .94
VIEW A VIEW A
13.00 .512 [13.00] .512
FRONT VIEW VIEW FRONT
.177
► RIGHT SIDE SIDE VIEW VIEW RIGHT
Cam Lock Cam Lockwith withInternal InternalO-ring 0-ring Part Part Number Number
Key Key Code Code (2 Keys) Keys) (2
Material Material
Finish Finish
K020CP K02OCP
1289 1289
die cast zinc die cast zinc
chrome chrome plated plated
lockfor forNEMA NEMA 44 and and 12 enclosures I lock 12 enclosures internalo-ring o-ringensures ensuresaa water water and and dust dust tight seal I internal tight seal bodymounting: mounting: hex hex nut I body nut internaltooth toothlock lockwasher washer I internal keyremovable removable in in both both positions positions I key cam included included I cam
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.441.44[36.5] 1.44 36.5 1.44 36.536.5 90°90° 90°
.75 .75 19.1.75 19.119.1 .75[19.1]
.89 .89[22.5].89 22.5.89 22.522.5 1.631.63 41.3 41.341.3 1.63 1.63[41.3] .940.940 23.88 .940 23.88 23.88
To Place 800.433.5554 1111
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
303
Cam Locks &_ Accessories
SIERRA PACIFIC ENGINEERING AND PRODUCTS Special Order Order Cam Cam Locks Special Locks Custom Cam Cam Lock Keep in in Mind Mind When Custom Lock Options Options to to Keep When Ordering Ordering (minimum order may apply) apply) (minimum order quantities quantities may
❑
Finish Finish Codes Codes (select one) (select one)
Key In: Key Removable Removable In:
Mounting Hardware Mounting Hardware
Rotation Rotation
(see pg. for options) options) (see pg. 305 for
Cam Style Cam Style and and Size Size
Cam Attachment Cam Attachment (see pg. (see pg. 305) 305)
Other Other Requirements Requirements
304 304
Download 3DmoDELs @ @www.spep.com www.spep.com Download
BK BK black black painted painted
❑
CP CP chrome chrome plated plated
❑
SD stainless stainless steel SD steel head head with with dust dust shutter shutter SS stainless steel 55 stainless steel head head
BL black 1:1 BL black chrome chrome
EC e-coated e-coated 0 EC
❑
BP brass 0 BP brass plated plated
NP nickel 0 NP nickel plated plated
ZP zinc zinc plated 01 ZP plated
❑
both both positions positions
hex hex nut nut
locked positiononly only • locked position
clip D clip
C
unlocked only unlocked position position only
spur washer spur washer
select aa letter letterfrom from A A to to Z Z ________ select
custom cam configurations configurations available available by by special custom cam special order order see cam cam style style and size on 306 -- 307 see and size on pages pages 306 307 ___________________________
screw-on screw-on
number of keys keys ________ number of
spun-on ❑ spun-on
keycode(s) code(s) ❑ key
___________________
trim ring trim ring
Standard Hardware Standard Hardware Definitions Definitions
Mounting Mounting Hardware Hardware
screwed-on screwed-on cam cam
spun-on cam cam (fixed) spun-on (fixed)
straight cam straight cam
offset cam cam offset
hex spur washer washer hex nut nut without without spur
-
hex nut and spur spur washer washer hex nut and
- IJ 0
spring spring clip clip
V :
Igo
Cam Locks & Accessories
Cam Lock Cam LockInformation Information
• al •1J
Hinges and Hardware Hinges and Industrial industrial bfrrdWare
Cam Cam Attachments Attachments
Cam Cam Styles Styles hook cam cam hook
90° bent cam 900 bent cam
combinationsofofstyles stylesavailable available by by special special order I combinations order
Cam Rotation Cam Rotation Options Options
'Mr
Standard Cams Cams Standard Key Removable Removable in Key in Locked Locked and Unlocked Unlocked Position and Position L.P.
A
B
it...)
L.P.
L.P.
C
D
C5 '
gi
L.P.
L.P.
b
S* S'
T
i3
L.P.
F
G
6
H
,_, L M(..g L.P.
L.P.
JJ K L.P.
I if:_5
L ..._
t 3
U*
L.P.
L.P.
L.P.
M
A
L.P.
N P Q *These These rotations are non-standard
B
,'t._A ,. L=W '`
E
U
L.P.
R
G
H
I 18
P (1 1 -) Z
L.P.
U*
.... „ ._,)
V
efm L.P.
L.P.
—
L.P.
P Q *These These rotations are non-standard N N
W* VV*
X
(-1 L.P.
LCD
U
,..)
M
4 L.P.
....
L.P.
L.P.
Y* V'
L.P.
L.P.
F
L.P.
T 4
L.P.
K L JJ KL
X
S* S'
Gap
L.P.
L.P.
CCI:li Th
D
L.P.
L.P.
t
C
L.P.
L.P.
W* VV*
L.P.
ri
t
km
L.P.
i_.)
L.P.
\s, V
nN CD
L.P.
re L.P.
(1 ::CR
(-1 L.P.
L.P.
L.P. L.P.
C1::11'1) Gq ,..,
L.P.
Key Removable Removable in Key in Locked Position Locked Position Only Only
L.P.
L.P.
L.P.
E E
Key Removable Removable in Key in Locked Locked and Unlocked Unlocked Position and Position
Key Removable Removable in Key in Locked Position Locked Position Only Only
4-1
t3.4. 2)
Hook Cams Cams Hook
t
L.P.
L.P.
(20
Cap R
_
Y*
,L..) ,,
L 0? L.P.
Z
NOTE: illustrations illustrations assume assume key upward with withflats flats on on lock lock body body at at the the sides sides I NOTE: keyinserted insertedwith with teeth teeth pointing pointing upward
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order: ta 800.433.5554
305 305
Cams Offset Cams and Offset Straight and 9mm 9mm Straight Front View • Front View
.63 [16.0] L
Cam Straight Cam Straight
Cam In Cam Offset In Offset
.079 [2.00]
OFFSET IN CAM
STRAIGHT CAM
Cam Out Cam Offset Out Offset
-.1 rOFFSET OFFSET OUTOUT
SET IN
-
;
t
OFFSET OUT CAM
OFFSET IN CAM
zinc plated I steel, plated steel, zinc I may or star star punch punch square or haveaa square mayhave
---
---
---
---
---
---
--OUT OFFSET ---
KC102 KC102
---
---
---
---
---
.750 [19.05] .750 [19.05]
KC103* KC103*
---
---
---
---
---
.813 [20.65] .813 [20.65]
KC104 KC104
---
---
---
---
KC454 KC454
KC479* KC479*
---
---
---
KC404 KC404
KC429 KC429
KC405* KC405*
KC430 KC430
KC455 KC455
KC480 KC480
---
KC406 KC406
KC431 KC431
KC456* KC456*
KC481* KC481*
---
KC407 KC407 KC108 KC108 OUT OFFSET KC408 KC109* KC408
KC432 KC432
KC457 KC457
KC482 KC482
KC147 KC147
KC433 KC433
KC458 KC458
KC483 KC483
KC148 KC148
KC409 KC409
KC434 KC434
KC459 KC459
KC484 KC484
KC149 KC149
KC460* KC460*
KC485* KC485*
KC150* KC150*
.875 [22.23] .875 [22.23]
KC105* KC105*
.938 [23.83] .938 [23.83]
KC106 KC106
OFFSET IN CAM
KC107* KC107*
KC109*
KC110* KC110*
OFFSET OUT CAM
1.250 [31.75] 1.250[31.75]
KC111* KC111*
KC410* KC410*
KC435* KC435*
1.313 [33.35] 1.313[33.35]
KC112 KC112
KC411 KC411
KC436 KC436
KC461 KC461
KC486 KC486
KC151 KC151
KC462 KC462
KC487 KC487
KC152 KC152
1.375 [34.93] 1.375 [34.93]
KC113 KC113
KC412 KC412
KC437 KC437
IN CAM OFFSET [36.53] 1.438 1.438 [36.53]
KC114 KC114
OUT CAM OFFSET KC413 KC413
KC438 KC438
KC463 KC463
KC488 KC488
KC153 KC153
KC464* KC464*
KC489* KC489*
KC154* KC154*
1.500 [38.10] 1.500 [38.10]
KC115* KC115*
KC414* KC414*
KC439* KC439*
1.563 [39.70] 1.563 [39.70]
KC116 KC116
KC415 KC415
KC440 KC440
KC465* KC465*
KC490 KC490
KC155 KC155
KC117 KC117
KC416 KC416
KC441 KC441
KC466 KC466
KC491 KC491
KC156 KC156
KC118 KC118
KC417 KC417
KC442 KC442
KC467 KC467
KC492 KC492
KC157 KC157
KC468* KC468*
KC493* KC493*
KC158* KC158*
[41.28] 1.625 1.625 [41.28] OUT OFFSET 1.688 [42.88] 1.688 [42.88]
OFFSET IN
.375 [9.53] .375 [9.53]
.688 [17.48] .688 [17.48]
1.063 [27.00] 1.063 [27.00] IN OFFSET1.125 1.125 [28.58] [28.58]
STRAIGHT CAM
.250 [6.35] .250 [6.35]
---
1.188 [30.18] 1.188 [30.18]
FRONT VIEW
.188 [4.76] .188 [4.76]
KC100 KC100 OFFSET IN KC101 KC101
1.000 [25.40] 1.000 [25.40]
.079 .079 [2.00] [2.00]
.63 [16.0]
.125 [3.18] .125 [3.18]
.063 [1.60] .063 [1.60]
.563 .079[14.30] .563 [14.30] [2.00] .625 [15.88] .625 [15.88]
STRAIGHT CAM
FRONT VIEW
Offset Dimensions Offset Dimensions
Straight Straight
Dimension LL Dimension
L
Accessorie . Locks ocks & & Accessories Cam
L
SIERRA PACIFIC ENGINEERING AND PRODUCTS
1.750 [44.45] 1.750 [44.45]
KC119* KC119*
KC418* KC418*
KC443* KC443*
1.813 [46.05] 1.813 [46.05]
KC120 KC120
KC419 KC419
KC444 KC444
KC469 KC469
KC494 KC494
KC159 KC159
KC470 KC470
KC495 KC495
KC160 KC160
1.875 [47.63] 1.875 [47.63]
KC121 KC121
KC420 KC420
KC445 KC445
1.938 [49.23] 1.938 [49.23]
KC122 KC122
KC421 KC421
KC446 KC446
KC471 KC471
KC496 KC496
KC161 KC161
KC472* KC472*
KC497* KC497*
KC162* KC162*
OFFSET OUT CAM
2.000 [50.80] 2.000 [50.80]
KC123* KC123*
KC422* KC422*
KC447* KC447*
2.063 [52.40] 2.063 [52.40]
KC124* KC124*
---
---
---
---
---
2.125 2.125 [53.98] [53.98]
KC125 KC125
---
---
---
---
---
2.188 [55.58] 2.188 [55.58]
KC126 KC126
---
---
---
---
---
2.250 [57.15] 2.250 [57.15]
KC127* KC127*
---
---
---
---
---
2.313 [58.75] 2.313 [58.75]
KC128 KC128
---
---
---
---
---
2.375 [60.33] 2.375 [60.33]
KC129 KC129
---
---
---
---
---
2.438 [61.93] 2.438 [61.93]
KC130 KC130
---
---
---
---
---
2.500 [63.50] 2.500 [63.50]
KC131* KC131*
---
---
---
---
---
items stock items are stock camsare I *these * thesecams
Cams Miscellaneous Miscellaneous Cams Part Part Number Number
Material Material
Finish Finish
Part Part Number Number
Material Material
Finish Finish
Part Part Number Number
Material Material
Finish Finish
Part Part Number Number
KC010* KC010*
steel steel
zinc plated zinc plated
KC030 KC030
steel steel
zinc plated zinc plated
KC900 KC900
steel steel
zinc plated zinc plated
KC006* KC006*
15.9 .63 .83[15.9]
1.63[413] 1.63 41.3
.63 16.1 .63[16.1 9MM STAR 9MM STAR PUNCH PUNCH
.098 2.49 .098[2.49] C.R.S. C.R.S.
th
1.05 26.7 1.05[26.7]
,7 66[16.6] .66 16.6
www.spep.com @ www.spep.com Download 3DmoDEui @ 306 Download 306
.63 16.0 \ .83[18.0
.63 16.0 .63[16.0]
.44[11.1 .44 11.1 ]
.73 18.5 .73[18.5]\
Cam Hook Hook Cam Straight Straight
1.12 28.4 1.55 39.4
1.38 35.0 • 1.09[27.8] 1.38[35.0] 1.09 27.6
SQ. 9MM SQ. 9MM Request Info
39.9 1.57 1.57[39.9]
90° 90°
SQ. 9MM SQ. 9MM
.091 2.30 --4-•.091[2.30]
1-800-453-1692 www.aboveboardelectronics.com
Finish Finish
plated zinc plated .118 [3] .118 [3]steel steel zinc
Cam Bent Cam Bent
Cam Bent Cam Bent
Cam Offset Cam Offset
Material Material
9MM SQ.
1.14 29.0
ictrinl Hardware In and Industrial Hinges and
Front Hook Left Left View -- Hook Front View
Offset Dimensions Offset Dimensions Dimension Dimension H H
Straight Straight
.063 [1.60] [1.60] .063 In In
Out Out
.125 [3.18] .125 [3.18] In In
Out Out
.188 [4.76] .188 [4.76] Out Out
In In
In In
Out Out
In In
Out Out ---
.625 [15.88] .625 [15.88]
KC201* KC201*
---
---
---
---
---
---
---
---
---
.688 [17.48] .688 [17.48]
KC202 KC202
KC601 KC601
KC801 KC801
---
---
---
---
---
---
---
---
.750 [19.05] .750 [19.05]
KC203 KC203
KC602 KC602
KC802 KC802
KC627 KC627
KC827 KC827
---
---
---
---
---
---
.813 [20.65] .813 [20.65]
KC204 KC204
KC603 KC603
KC803 KC803
KC628 KC628
KC828 KC828
KC653 KC653
KC853 KC853
KC678 KC678
KC878 KC878
---
-----
.875 [22.23] .875 [22.23]
KC205 KC205
KC604 KC604
KC804 KC804
KC629 KC629
KC829 KC829
KC654 KC654
KC854 KC854
KC679 KC679
KC879 KC879
---
KC805 KC805
KC630 KC630
KC830 KC830
KC655 KC655
KC855 KC855
KC680 KC680
KC880 KC880
---
---
.938 [23.83] .938 [23.83]
KC206 KC206
KC605 KC605
[25.40] 1.000 1.000[25.40]
KC207* KC207*
KC606 KC606
KC806 KC806
KC631 KC631
KC831* KC831*
KC656 KC656
KC856 KC856
KC681 KC681
KC881 KC881
KC246 KC246
KC346 KC346
1.063 1.063 [27.00] [27.00]
KC208 KC208
KC607 KC607
KC807 KC807
KC632 KC632
KC832 KC832
KC657 KC657
KC857 KC857
KC682 KC682
KC882 KC882
KC247 KC247
KC347 KC347
[28.58] 1.125 1.125[28.58]
KC209* KC209*
KC608 KC608
KC808 KC808
KC633 KC633
KC833 KC833
KC658 KC658
KC858 KC858
KC683 KC683
KC883 KC883
KC248 KC248
KC348 KC348
[30.18] 1.188 1.188[30.18]
KC210 KC210
KC609 KC609
KC809 KC809
KC634 KC634
KC834 KC834
KC659 KC659
KC859 KC859
KC684 KC684
KC884 KC884
KC249 KC249
H KC349 KC349
[31.75] 1.250 1.250[31.75]
KC211* KC211*
KC610 KC610
KC810 KC810
KC635 KC635
KC835 KC835
KC660 KC660
KC860 KC860
KC685 KC685
KC885 KC885
KC250 KC250
KC350 KC350
[33.35] 1.313 1.313[33.35]
KC212 KC212
KC611 KC611
KC811 KC811
KC636 KC636
KC836 KC836
KC661* KC661*
KC861* KC861*
KC686 KC686
KC886 KC886
KC251 KC251
KC351 KC351
KC352 KC352
[34.93] 1.375 1.375[34.93] [36.53] 1.438 1.438[36.53]
KC213 KC213
KC612 KC612
KC812 KC812
KC637* KC637*
KC837 KC837
KC662 KC662
KC862 KC862
KC687 KC687
KC887 KC887
KC252 KC252
KC214 KC214
KC613 KC613
KC813 KC813
KC638 KC638
KC838 KC838
KC663 KC663
KC863 KC863
KC688 KC688
KC888 KC888
KC253 KC253
KC353 KC353
[38.10] 1.500 1.500[38.10]
KC215* KC215*
KC614 KC614
KC814 KC814
KC639 KC639
KC839 KC839
KC664 KC664
KC864 KC864
KC689 KC689
KC889 KC889
KC254 KC254
KC354 KC354
[39.70] 1.563 1.563[39.70]
KC216* KC216*
KC615 KC615
KC815 KC815
KC640 KC640
KC840 KC840
KC665 KC665
KC865 KC865
KC690 KC690
KC890 KC890
KC255 KC255
KC355 KC355
KC256 KC256
KC356 KC356 KC357 KC357
[41.28] 1.625[41.28] 1.625
KC217 KC217
KC616 KC616
KC816 KC816
KC641 KC641
KC841 KC841
KC666 KC666
KC866 KC866
KC691 KC691
H KC891 KC891
[42.88] 1.688 1.688[42.88]
KC218 KC218
KC617 KC617
KC817 KC817
KC642 KC642
KC842 KC842
KC667 KC667
KC867 KC867
KC692 KC692
KC892 KC892
KC257 KC257
[44.45] 1.750[44.45] 1.750
KC219 KC219
KC618 KC618
KC818 KC818
KC643 KC643
KC843 KC843
KC668 KC668
KC868 KC868
KC693 KC693
KC893 KC893
KC258 KC258
FRONT VIEW HOOK LEFT
items stock items are stock camsare I *these * thesecams
Dimension Dimension H H
Straight Straight
.625 [15.88] .625 [15.88]
KC301 KC301
.063 [1.60] .063 [1.60]
.125 [3.18] .125 [3.18]
Offset Dimensions Offset Dimensions H .188 [4.76] .188 [4.76]
In In
Out Out
In In
Out Out
In In
---
---
---
---
-----
.688 [17.48] .688 [17.48]
KC302 KC302
KC801 KC801
KC601 KC601
---
---
.750 [19.05] .750 [19.05]
KC303* KC303*
KC802 KC802
KC602 KC602
KC827 KC827
KC627 KC627
---
In In
Out Out
In In
---
---
---
---
---
---
---
---
---
FRONT VIEW HOOK RIGHT
---
---
[2.00] KC878 KC878
KC678 KC678
.079
---
---
---
---
---
OFFSET IN
KC828 KC828
KC628 KC628
.875 [22.23] .875 [22.23]
KC305 KC305
KC804 KC804
KC604 KC604
KC829 KC829
KC629 KC629
KC854 KC854
KC654 KC654
KC879 KC879
KC679 KC679
---
---
KC655 KC655
KC880 KC880
KC680 KC680
---
---
.938 [23.83] .938 [23.83]
KC306 KC306
KC805 KC805
KC605 KC605
KC830 KC830 H
KC630 KC630
KC855 KC855
[25.40] 1.000 1.000[25.40]
KC307 KC307
KC806 KC806
KC606 KC606
KC831* KC831*
KC631 KC631
KC856 KC856
KC656 KC656
KC881 KC881
KC681 KC681
KC346 KC346
KC246 KC246
KC657 KC657
KC882 KC882
KC682 KC682
KC347 KC347
KC247 KC247
KC348
KC248
KC832 KC832
KC632 KC632
[28.58] 1.125 1.125[28.58]
KC309 KC309
KC808 KC808
KC608 KC608
FRONT VIEW KC633 KC833 HOOK LEFT
KC833
KC633
FRONT VIEW KC858 RIGHT HOOK
KC858
KC658 KC658
STRAIGHT CAM KC683 KC883 KC683 KC883
[30.18] 1.188 1.188[30.18]
KC310 KC310
KC809 KC809
KC609 KC609
KC834 KC834
KC634 KC634
KC859 KC859
KC659 KC659
KC884 KC884
KC684 KC684
KC349 KC349
KC249 KC249
[31.75] 1.250 1.250[31.75]
KC311 KC311
KC810 KC810
KC610 KC610
KC835 KC835
KC635 KC635
KC860 KC860
KC660 KC660
KC885 KC885
KC685 KC685
KC350 KC350
KC250 KC250
KC661* KC661*
KC886 KC886
KC686 KC686
KC351 KC351
KC251 KC251
IN CAM KC348 OFFSET KC248
[33.35] 1.313 1.313[33.35]
KC312 KC312
KC811 KC811
KC611 KC611
KC836 KC836
KC636 KC636
KC861* KC861*
[34.93] 1.375 1.375[34.93]
KC313 KC313
KC812 KC812
KC612 KC612
KC837 KC837
KC637* KC637*
KC862 KC862
KC662 KC662
KC887 KC887
KC687 KC687
KC352 KC352
KC252 KC252
KC663 KC663
KC888 KC888
KC688 KC688
KC353 KC353
KC253 KC253
[36.53] 1.438 1.438[36.53]
KC314 KC314
KC813 KC813
KC613 KC613
KC838 KC838
KC638 KC638
KC863 KC863
[38.10] 1.500 1.500[38.10]
KC315 KC315
KC814 KC814
KC614 KC614
KC839 KC839
KC639 KC639
KC864 KC864
KC664 KC664
KC889 KC889
KC689 KC689
KC354 KC354
KC254 KC254
KC665 KC665
KC890 KC890
KC690 KC690
KC355 KC355
KC255 KC255
[39.70] 1.563 1.563[39.70]
KC316 KC316
KC815 KC815
KC615 KC615
KC840 KC840
KC640 KC640
KC865 KC865
1.625 1.625 [41.28] [41.28]
KC317 KC317
KC816 KC816
KC616 KC616
KC841 KC841
KC641 KC641
KC866 KC866
KC666 KC666
KC891 KC891
KC691 KC691
KC356 KC356
KC256 KC256
KC667 KC667
KC892 KC892
KC692 KC692
KC357 KC357
KC257 KC257
KC668 KC668
KC893 KC893
KC693 KC693
KC358 KC358
KC258 KC258
[42.88] 1.688 1.688[42.88]
KC318 KC318
KC817 KC817
KC617 KC617
KC842 KC842
KC642 KC642
KC867 KC867
[44.45] 1.750 1.750[44.45]
KC319 KC319
KC818 KC818
KC618 KC618
KC843 KC843
KC643 KC643
KC868 KC868
FRONT VIEW HOOK RIGHT
Cam Straight Straight Cam .079 .079 [2.00] [2.00]
F __ II
STRAIGHT CA
OFFSET IN
OFFSET IN
STRAIGHT CAM
Cam In Cam Offset Offset In OFFSET IN
OFFSET OUT
---
KC603 KC603
KC607 KC607
.63 [16.0]
STRAIGHT CAM
KC803 KC803
KC807 KC807
FRONT VIEW HOOK LEFT
.079 [2.00]
Out Out
KC304 KC304
KC308 KC308
.63 .63 [16.0] [16.0]
KC358 KC358
.813 [20.65] .813 [20.65]
1.063 1.063 [27.00] [27.00]
FRONT VIEW HOOK RIGHT
Front Hook Right Right View -- Hook Front View
FRONT VIEW HOOK RIGHT
KC653 KC653 KC853 KC853 [16.0]
KC857 KC857
FRONT VIEW HOOK LEFT
.375 [9.53] .375 [953]
Out Out FRONT VIEW HOOK LEFT
.63
.250 [6.35] .250 [6.35]
H
.079 [2.00]
.63 [16.0]
By Length Hook Left Part Numbers Numbers By Length and and Offset Offset Left -- Part Hook
.63 [16.0]
.375 [9.53] .375 [9.53]
.250 [6.35] [6.35] .250
811055833V V51 *II
By Length Hook Part Numbers Numbers By Length and and Offset Offset Right -- Part Hook Right
Cam Locks & Accessories
Cams Offset Cams and Offset 9mm Straight Straight and 9mm
OFFSET IN CAM
Cam Offset Out Out Cam Offset
OFFSET OU
OFFSET OUT OFFSET OUT
OFFSET OUT CAM
zinc plated steel, zinc I steel, plated square or haveaa square I may or mayhave star punch star punch
stock items are stock camsare * thesecams I *these items Request Info
1-800-453-1692 www.aboveboardelectronics.com
800.433.5554 To Place To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
307
Cam Locks &_ Accessories
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Cam Lock Cam Lock Dust Dust Cover Cover Part Part Number Number
1.90 [48.3] 48.3 1.90 .020 [.50] .50 .020
.49 12.5 .49 [12.5]
chrome chrome
protectscam camlock lock from from dirt I protects dirt and and water water springloaded loadedlid lid keeps keeps itself itself closed closed I spring stampedstainless stainlesssteel/zinc steel/zinc die die cast cast I stamped construction construction
.638 16.20 .638 [16.20]
.61 15.5 .61 [15.5]
Finish Finish
K220 K220
1.10 [28.0] 28.0 01.10
Plastic Cam Lock Plastic Cam Lock Dust Dust Cover Cover 3.0 77.5 3.0[ 77.5]
1.06 27.0 01.06[27.0]
.656 .656[ 16.65 16.65 ]
Part Part Number Number
Finish Finish
K221 K221
black black
durable thermoplastic thermoplastic I durable
1.06 27.0 .06[ 27.0]h 01 1.0 u .04 04]1.0]
.28 .28[ 7.0 7.0 ]
Neoprene Gasket Neoprene Gasket
0
22.60 0 .890 .890[22.60]
.630 .630[ 16.00 16.00 ]
Part Part Number Number
Finish Finish
K04G KO4G
black black
.039 .039[ 1.00 1.00 ]
Cam Lock Cam Lock Finger Finger Pull Pull Part Part Number Number
.057 1.45 .057[1.45]
.65 16.5 .65[ 16.5]
KH34SS KH3455
Material Material
Finish Finish
304SS 304SS
tumbled tumbled
19.8 0 .78 78[19 8] 2.30 58.4
-11•-
Plastic Cam Lock Plastic Cam Lock Base Base
1.00 25.4 1.00[25.4]
.75 19.0
C 1.43 36.3 1.43[36.3]
1.43 36.3 36.3 ] 1.43[
.14 3.4 .14]3.4]
.750 19.05 0.750[19.05]
.63 16.0 .63[16.0]
Plastic Cam Lock Lock Finger Plastic Cam Finger Pull Pull
fin
.88 22.2
.19 4.8
.750 19.05
Material Material
Finish Finish
KH36PW KH36PW
UV UVstable stable polycarbonate polycarbonate
polar polar white white
KH36NW KH36NW
UV UVstable stable polycarbonate polycarbonate
new new white white
.120 3.05 (2) (2) PLCS. PLCS.
.19 4.8 .19[4.8]
.63 16.0
Part Part Number Number
.88 22.2
1.43 36.3
.88 22.2
.88 22.2
Part Part Number Number
Material Material
Finish Finish
KH35PW KH35PW
UV UVstable stable polycarbonate polycarbonate
polar polar white white
KH35NW KH35NW
UV UVstable stable polycarbonate polycarbonate
new new white white
2.44 61.9
.14 3.4 1.43 36.3
308
.88 22.3
.120 3.05 (2) (2) PLCS. PLCS.
Request Info
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1-800-453-1692 www.aboveboardelectronics.com
Dia. Dia.
Height Height
Finish Finish
.087 .087 [2.21] [2.21]
nickel nickel plated plated
KH02NP KHO2NP
steel steel
1.13 1.13 [28.6] [28.6]
KH02CP KHO2CP
steel steel
1.13 1.13 [28.6] [28.6]
.087 .087 [2.21] [2.21]
chrome chrome plated plated
KH02BP KHO2BP
steel steel
1.13 1.13 [28.6] [28.6]
.087 .087 [2.21] [2.21]
brass brass plated plated
KH02SS KHO2SS
304SS 304SS
1.13 1.13 [28.6] [28.6]
.087 .087 [2.21] [2.21]
Part Part Number Number
KH20 KH2O
Material Material
Finish Finish
spring spring steel steel
nickel nickel plated plated
instead of of aa holdslock lock in in place place instead I holds hex for quieter installation hex nut nut for quieter installation standard cam cam locks locks for standard I for
tumbled tumbled & polished polished
- IJ 0
fits behind behind head headof of standard standard3/4 3/4[19] [19] diameter diameter lock lock I fits
Washer Washer Part Part Number Number
Mounting Clip Mounting Clip Outside utside Material Material O Dia. Dia
KH04 KHO4
steel steel
Part Part Number Number
Thickness Finish Finish Thickness
1.05 1.05 [26.6] [26.6]
.031 .031 [.79] [.79]
zinc zinc plated plated
KH23 KH23
fits standard standard3/4 3/4[19] [19] diameter diameterlock lock with with two two flats flats I fits
Outside utside Material Material O Dia. Dia
KH31SS KH31SS
304SS 304SS
KH32 KH32
steel steel
zinc zinc plated plated
Part Part Number Number
.051 .051 [1.19] [1.19]
mill mill
Finish Finish zinc plated zinc plated
for clockwise clockwise or reversesfor I reverses or counterclockwise operation counterclockwise operation
4-Prong Spur Spur Washer Washer 4-Prong Outside utside Material Material O Dia. Dia
spring spring steel steel
KH40 KH40
fits standard standard3/4 3/4[19] [19] diameter diameterlock lock with with two two flats flats I fits recommendedfor for wood wood applications applications I recommended
Part Part Number Number
Finish Finish
90° Reversible Reversible Stop Stop Washer Washer 90°
Thickness Finish Finish Thickness
1.00 1.00 [25.4] [25.4]
Material Material
instead of of aa holdslock lock in in place place instead I holds hex for quieter installation hex nut nut for quieter installation standard cam cam locks locks for standard I for profile low profile I low
Stainless Steel Steel4-Prong 4-ProngSpur Spur Washer Washer Stainless Part Part Number Number
J
V :
Material Material
Mounting Clip Mounting Clip
Outside Outside
-
Part Part Number Number
Cam Locks & Accessories
Component Parts Parts Component Trim Ring Trim Ring
• al •1
Hinges Hinges and and Industrial Industrial Hardware Hardware
180° Reversible Stop Stop Washer Washer 180° Reversible Part Part Number Number
Thickness Finish Finish Thickness
1.31 1.31 [33.3] [33.3]
.03 [.79] [.79] .03
KH42 KH42
clear clear zinc zinc
Finish Finish zinc plated zinc plated
reversesfor for clockwise clockwise or I reverses or counterclockwise operation counterclockwise operation
fits standard standard3/4 3/4[19] [19] diameter diameterlock lock with with two two flats flats I fits recommendedfor for wood wood applications applications I recommended
Body Body Nuts Nuts Part Part Number Number
Cam Mounting Cam Mounting Screw Screw
Wrench Wrench Size Size
Thickness Thickness
Finish Finish
KH10 KH10
.88 .88 [22.2] [22.2]
.172 [4.37] [4.37] .172
nickel nickel plated plated
KH11 KH11
1.00 1.00 [25.4] [25.4]
.359 [9.13] [9.13] .359
nickel nickel plated plated
KH12 KH12
.88 .88 [22.2] [22.2]
.141 .141 [3.57] [3.57]
zinc plated zinc plated
Part Part Number Number
KH50 KH50
Finish Finish zinc plated zinc plated
for locks locks with with screw-on screw-on cam cam I for 1/4-20UNC UNC thread I 1/4-20 thread .23 [6.0] [6.0] long I .23 long Phillips head I Phillips head
material: die die cast cast zinc zinc I material: fits standard standard3/4 3/4[19] [19] diameter diameter locks locks I fits 3/4" -- 24 24 thread I 3/4" thread Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
309 309
Tie Downs & Door Holders
''TERRA PACIFIC
ENGINEERING AND PRODUCTS
Wire Door Wire Door Holders Holders Part Part Number Number
0
Length Material Length Material
Finish Finish
3.00 76.2 3.00[76.2]
601SS03 6015503
2.5 [64] 2.5 [64]
304SS 304SS
electropolished electropolished
2.30 58.4 2.30[58.4]
601 601
4 4 [102] [102]
steel steel
zinc plated zinc plated
601SS 60155
4 [102] [102] 4
304SS 304SS
electropolished electropolished
609ZN 609ZN
66 [152] [152]
steel steel
zinc plated zinc plated
609SS 60955
66 [152] [152]
304SS 304SS
electropolished electropolished
.203 5.16 0.203[5.18] (4) HOLES
1.75 44.5 1.03[26.1] 1.03 26.1 1.75[44.5]
include female female receiver receiver ► parts parts include LENGTH
C
0
female dimensions female dimensions are are the the same same as as male male overall overall dimensions. dimensions.
45° 45° Wire Wire Door Door Holders Holders Part Part Number Number III
60202 60202
3.00 76.2 3.00[76.2] 2.30 58.4
Length Material Length Material 4 [102] [102] 4
steel steel
Finish Finish zinc plated zinc plated
includes female female receiver receiver ► part part includes
1.39 35.3
1.75 44.5 1.03[26.1] 1.03 26.1 1.75[44.5] 45°
.203 5.16 (4) HOLES
4.00 101.6
female dimensions female dimensions are are the the same same as as male male overall overall dimensions. dimensions.
90° Wire 90° Wire Door Door Holders Holders Part Part Number Number
3.00 76.2 3.00[76.2] 2.30 58.4 2.30[58.4]
2.00 50.8 2.00[50.8]
Finish Finish
602 602
22 [51] [51]
steel steel
zinc plated zinc plated
602SS 60255
22 [51] [51]
304SS 304SS
electropolished electropolished
include female female receiver receiver ► parts parts include
90°
1.75 44.5 1.03[26.1] 1.03 26.1 1.75[44.5]
.203 5.16 0.203[5.16] (4) HOLES
Length Material Length Material
2.09 53.2 2.09[53.2]
female dimensions female dimensions are are the the same same as as male male overall overall dimensions. dimensions.
Wire Door Wire Door Holder Holder with with Spring Spring Loaded Loaded Female Female Keeper Keeper Part Part Number Number
603SS 60355
Length Material Length Material 4 [102] [102] 4
304SS 304SS
Finish Finish electropolished electropolished
includes female female receiver receiver ► part part includes
Plastic Plastic Base Base Part Part Number Number NOTE: NOTE: part part dimensions dimensions are the same as as part are the same part no. no. 601SS above. 60155 above.
Plastic Base
P1016 P1016
Description Description plastic for all plastic base base for all male male and and female wire female wire door door holders holders
part no. P1016
female dimensions female dimensions are are the the same same as as male male overall overall dimensions. dimensions.
310 310
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
-' 11-rdware Hinges and Industrial Hardware ind Industri
60101* 60101* 601SS01 6015501
Length Length
Material Material
Finish Finish
4 4 [102] [102]
steel steel
zinc plated zinc plated
4 4 [102] [102]
304SS 304SS
fD
0
O
3.00 76.2 3.00[76.2]
electropolished electropolished
2.30 58.4
304SS 304SS
.203 5.16 (4) HOLES
4 [102] [102] with withspring spring loaded electropolished 603SS01 loaded electropolished 6035501 4 female keeper female keeper 304SS 304SS
603SS02 6035502
1.75 44.5
Res 0
1.03 26.1
66 [152] with spring spring loaded electropolished [152] with loaded electropolished female keeper female keeper
include female female receiver receiver ► parts parts include spring loaded keeper may may be separately as ► spring loaded keeper be purchased purchased separately as part 603SS03 part no. no. 6035503 spring loaded ► spring loaded to to prevent prevent rattle rattle * non-stock ► * non-stock
O O
LENGTH
O
female dimensions female dimensions are are the the same same as as male male overall overall dimensions. dimensions.
Spring Loaded 45° 45° Wire Wire Door Spring Loaded Door Holders Holders Part Part Number Number
Length Length
Material Material
Finish Finish
60202SS01 602025501
4 [102] 4 [102]
304SS 304SS
electropolished electropolished
Tie Downs & Door Holders
Spring Loaded Loaded Wire Wire Door Spring Door Holders Holders Part Part Number Number
includes female female receiver receiver ► part part includes spring loaded ► spring loaded to to prevent prevent rattle rattle
3.00 76.2 1.39 35.3
2.30 58.4
1.75 44.5
1.03 26.1 45°
4.06 103.1
female dimensions female dimensions are are the the same same as as male male overall overall dimensions. dimensions.
Spring Loaded 90° 90° Wire Wire Door Spring Loaded Door Holders Holders Length Length
Material Material
Finish Finish
60201* 60201*
Part Part Number Number
22 [51] [51]
steel steel
zinc plated zinc plated
3.00 76.2
602SS01 6025501
22 [51] [51]
304SS 304SS
electropolished electropolished
2.30 58.4
include female female receiver receiver ► parts parts include spring loaded ► spring loaded to to prevent prevent rattle rattle * non-stock ► * non-stock
2.00 50.9
1.75 44.5
90°
1.03 26.2
2.08 52.8
.203 5.16 (4) HOLES HOLES (4)
female dimensions female dimensions are are the the same same as as male male overall overall dimensions. dimensions.
Baggage Door Catch Catch Baggage Door Part Part Number Number
625 625
Description Description
Finish Finish
die cast zinc zinc pull die cast pull
silver paint silver paint
18 304SS base 18 gauge gauge 304SS base
mill mill
2.38 [60.5]
.37 [9.4] .37 [9.4]
spring loaded loaded (stainless (stainless steel steel spring) spring) ► spring 2.13 [54.1] .206 [5.23] (4) HOLES
.76 [19.3]
.60 [15.2]
.21 [5.3] 2.02 [5.3] [5.3] 2.02
Request Info
1-800-453-1692 www.aboveboardelectronics.com
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
311
Tie Downs & Door Holders
SIEP"al PfilIFIC ENGINEERING AND
Two-Piece Aluminum Aluminum Door Two-Piece Door Hold-Backs Hold-Backs No Kits No Spring Spring Kits .262 6.65 HOLE HOLE 0.282[8.85] WITH 1TH82 82° C'SINK CSINK (2) PLACES PLACES (2)
.91 23.0 .91[23.0]
LENGTH
.44 11.1
O
0
3.28 83.3 3.28[83.3]
2.41 61.1 2.41[811 .54 13.7
620-01 shown shown 620-01 .78 19.8
C
1.25 31.8 1.25[ 31.8]
.2579 6.551 HOLE HOLE 0.2579[8.551] WITH .387X X 82° 82 C'SINK C'SINK 1TH 0.387 (4) PLACES PLACES (4)
O
O 2.77 70.4
.85 21.5 .85[21S]
O 1.81 46.0 1.81] 48.01
Part Part Number Number
Length Length
Finish Finish
620 620
2.00 [50.8] 2.00 [50.8]
tumbled polished polished tumbled
620-01 620-01
4.00 [101.6] tumbledpolished polished 4.00 [101.6] tumbled
620-03 620-03
6.00 [152.4] tumbledpolished polished 6.00 [152.4] tumbled
620-07 620-07
10.00 [254.0] tumbled polished polished 10.00 [254.0] tumbled
620BK 620BK
2.00 [50.8] 2.00 [50.8]
black black e-coated e-coated
620BK-01 620BK-01
4.00 [101.6] [101.6] 4.00
black black e-coated e-coated
620BK-03 620BK-03
6.00 [152.4] 6.00 [152.4]
black black e-coated e-coated
620BK-07 620BK-07
10.00 [254.0] [254.0] 10.00
black black e-coated e-coated
two-piecekits kits are are packaged packaged inside inside aa sealed I two-piece sealed polybag polybag 300 series series stainless stainless steel I 300 steel pins pins
Spring Loaded Loaded Kits Kits Spring
1.20 30.6
Part Part Number Number
NOTE: the 622-Series 622-Series has NOTE: the has aa spring spring loaded loaded arm arm to to keep keep it it from from rattling rattling
Length Length
Finish Finish
622 622
2.00 [50.8] 2.00 [50.8]
tumbled polished polished tumbled
622-01 622-01
4.00 [101.6] [101.6] 4.00
tumbled polished polished tumbled
622-03 622-03
6.00 [152.4] 6.00 [152.4]
tumbled polished polished tumbled
622-07 622-07
10.00 [254.0] [254.0] 10.00
tumbled polished polished tumbled
Length Length
Finish Finish
2.00 [50.8] 2.00 [50.8]
black black e-coated e-coated
621P 621P
2.00 [50.8] 2.00 [50.8]
tumbled polished polished tumbled
621-01 621-01
4.50 [114.3] [114.3] 4.50
black black e-coated e-coated
621P-01 621P-01
4.50 [114.3] tumbledpolished polished 4.50 [114.3] tumbled
621-03 621-03
6.00 [152.4] 6.00 [152.4]
Three-Piece Aluminum Aluminum Ball Ball and Door Hold-Backs Hold-Backs Three-Piece and Socket Socket Door .255[6.47] [6.47]HOLE HOLE WITH WITH 0.255 .375[9.52] [9.52] xx 82° 82 C'SINK C'SINK 0.375 (2)PLACES PLACES (2
.98 24.9 .98 [24.9]
3.25 82.6 3.25[82.6]
1.11 [28.1] 28.1 1.11
Part Part Number Number
621 621
2.25 57.2 2.25[57.2]
LENGTH LENGTH
black black e-coated e-coated
621P-03 621P-03
6.00 [152.4] tumbledpolished polished 6.00 [152.4] tumbled
621-07 621-07
10.00 [254.0] [254.0] 10.00
621P-07 621P-07
10.00 [254.0] tumbled polished polished 10.00 [254.0] tumbled
black black e-coated e-coated
three-piecekits kits are are packaged packaged inside inside aa sealed I three-piece sealed polybag polybag 300 series series stainless stainless steel I 300 steel pins pins
.31 7.9 .31 [7.9]
.53 [13.5] 13.5 0.53 4.3 CLEARANCE CLEARANCE TO TO PREVENT PREVENT .17 .17 [4.3] DAMAGE BEING DAMAGE ON ON SURFACE SURFACE BEING MOUNTED ON MOUNTED ON
621-01 shown shown 621-01
1.25 [31.8] 31.8 1.25
.258[6.55] [6.55]HOLE HOLEWITH WITH 0.258
.387 [9.82] [9.82] xx82° 82 C'SINK C'SINK 0.387 (4) PLACES (4) PLACES
.85 21.5 .85 [21.5]
2.77 [70.4] 70.4 2.77
0 CD
1.81 [46.0] 46.0 1.81
312 312
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1.20 [30.6] 30.6 1.20
Request Info
1-800-453-1692 www.aboveboardelectronics.com
-' 11-rdware Hinges and Industrial Hardware ind Industri
Plastic Door Holders
madeof ofUV UV resistant resistant high I made high impact impact flexible plastic plastic flexible willnot notdamage damagesurface surface when I will when mounted mounted
O
s
3.50 [88.9] [88.9] Door Door Holders Holders 3.50 Length Length
Color Color
624BK 624BK
3.50 3.50 [88.9] [88.9]
black black
624G 624G
3.50 3.50 [88.9] [88.9]
gray gray
624W 624W
3.50 3.50 [88.9] [88.9]
white white
Part Number Part Number
Length Length
Color Color
626BK 626BK
5.50 5.50 [139.7] [139.7]
black black
626G 626G
5.50 5.50 [139.7] [139.7]
gray gray
626W 626W
5.50 5.50 [139.7] [139.7]
white white
Res 0
2.93 74.5 2.20[55.9] 2.20 55.9 2.93[74.5] TYP. TYP. TYP. TYP.
O O
.197 5.00 0.197[5.00] TYP. TYP.
5.50 [139.7] [139.7] Door Door Holders Holders 5.50
Length Length
Color Color
628BK 628BK
7.50 [190.5] 7.50 [190.5]
black black
628G 628G
7.50 [190.5] 7.50 [190.5]
gray gray
628W 628W
7.50 [190.5] 7.50 [190.5]
white white
O
LENGTH LENGTH
fD
.308 7.82 0.308[7.82]
.91 23.1
7.50 [190.5] Door Door Holders Holders 7.50 [190.5] Part Number Part Number
fD
0
1.70 43.3 1.70[43.3] TYP. TYP. .98 24.9 .98[24.9] TYP. TYP.
Part Part Number Number
Tie Downs & Door Holders
al Plastic Door Holders
Features Features
.50 12.7
.50 12.7 .50[12.7]
9.50 [241.3] [241.3] Door Door Holders Holders 9.50 Length Length
Color Color
630BK 630BK
Part Number Part Number
9.50 9.50 [241.3] [2413]
black black
630G 630G
9.50 9.50 [241.3] [2413]
gray gray
630W 630W
9.50 9.50 [241.3] [2413]
white white
Plunger & & Socket Plunger Socket Door Door Holder Holder Part Part Number Number
639 639
Plunger Plunger Material Material
Socket Socket Material Material
black black plastic plastic
black rubber black rubber with steel steel insert with insert
A
2.3 59 2.3[59] 2.04 51.8 2.04[51.8]
1.59 40.5
2.6 65 2.6[65] .30 7.5 .30[7.5]
, .26 6.7 0.26[6.7]
\
=1
r
, IN ===E
1
/ 4-Y A
PLUNGER PLUNGER TOP VIEW TOP VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
1.36 34.5 1.36[34.5]
SOCKET SOCKET
5/16"-18 THREAD 18 THREAD 5/16, STEEL INSERT STEEL INSERT
SECTION A-A SECTION A-A
SECTION A-A SECTION A-A
ALL THE THE WAY WAY IN IN ALL
JUST IN JUST IN
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
313 313
Tie Downs & Door Holders
SIERRA PACIFIC ENGINEERING AND PRODUCTS Female Female Door Door Sockets Sockets Part Part Number Number
.90 22.9
1.34 34.1 01.34[34.1]
Finish Finish
nylon nylon socket socket insert insert
white white
600BK 600BK
nylon nylon socket socket insert insert
black black
adjustablesocket socketincreases increases holding holding capacity capacity by I adjustable by tightening mounting mounting screw screw tightening screw not not included included I screw
.265 6.73 ] 0.265[6.73 SCREW HOLE
O
Description Description
600 600
Male Male Door Door Holders Holders Part Part Number Number
C
.210 5.33 (2) HOLES
O
1.02 25.9
Description Description
Finish Finish
604ZN 604ZN
1.5 1.5 [38.1] [38.1] steel steel
zinc plated zinc plated
604SS 60455
1.5 [38.1] 1.5 [38.1] 304SS 304SS
polished polished
605ZN 605ZN
2.5 2.5 [63.5] [63.5] steel steel
zinc plated zinc plated
605SS 60555
2.5 2.5 [63.5] [63.5] 304SS 304SS
polished polished
606ZN 606ZN
3.5 3.5 [88.9] [88.9] steel steel
zinc plated zinc plated
606SS 60655
3.5 [88.9] [88.9] 304SS 3.5 304SS
polished polished
607ZN 607ZN
4.5 [114.3] 4.5 [1143] steel steel
zinc plated zinc plated
607SS 60755
4.5 [114.3] 304SS 4.5 [1143] 304SS
polished polished
maleholder holder and andfemale female socket socket sold sold separately I male separately in assembled • length length determined determined in assembled state state
LENGTH
Male Male Door Door Holders Holders with with 30° 30° Offset Offset Part Number
.210 5.33 (2) HOLES
r
1.31 33.2
611SS 61155
Description Description
Finish Finish
3.5 [88.9] [88.9] 304SS 3.5 304SS with 300 30° offset with offset
polished polished
in assembled • length length determined determined in assembled state state 1.02 25.9
30°
2.06 52.3
Plunger & Socket Plunger & Socket Door Door Holder Holder 1.30 [33.00] 33.00 01.30
LENGTH
Male Male Door Door Holder Holder Plungers Plungers
.45 11.5 .45[11.5]
Part Part No. No.
52.1 2.05 [52.1] CENT.
.63 [16.0] 16.0 0.63
76.0 2.99 [76.0]
.37 [9.5] 9.5 0.37
.276 [7.00] 7.00 HOLE HOLE WITH WITH 0.276 82 USINK C'SINK FORA FOR A 612 #12 F.H.S. 82°
Description Description
Length Length
Finish Finish
613ZN 613ZN
1-5/8" steel 1-5/8" steel
1.14 [29.0] 1.14 [29.0]
zinc plated zinc plated
614ZN 614ZN
2-1/8" 2-1/8" steel steel
1.65 [41.9] 1.65 [41.9]
zinc plated zinc plated
615ZN 615ZN
2-5/8" 2-5/8" steel steel
2.24 [56.9] 2.24 [56.9]
zinc plated zinc plated
616ZN 616ZN
3-1/8" steel 3-1/8" steel
2.72 [69.1] 2.72 [69.1]
zinc plated zinc plated
.31 [8.0] 8.0 .31
Female Female Door Door Holder Holder Socket Socket HOLE DIAMETER
Part Part No. No.
1.02 26.0
619 619
2.56 [65.0] 65.0 2.56 CENT.
.276 [7.00] 7.00 HOLE HOLE WITH WITH 0.276 82 C'SINK FOR A 612 #12 F.H.S. 82° USINK FORA
314 314
Download 3DmoDELs @ @www.spep.com www.spep.com Download
1.93 49.0
Description Description
Length Length
Finish Finish
tight fit fit socket tight socket
.528 .528 [13.41] [13.41]
zinc zinc plated plated
87.0 3.43 [87.0]
.31 8.0
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and and Industrial industrial Hardware bfrrdWare
Working Load Load Limit Limit is load which which should should ever ever be beapplied appliedtotoaaproduct.The product. TheFederal FederalD.O.T. D.O.T. requires the Working Working Working is the the maximum maximum load requires the Load 1/3 of of the the Rated RatedLoad Load Capacity. Capacity. You You should exceedthe theWorking WorkingLoad Load Limit! Limit! Load Limit Limitnot not to to exceed exceed 1/3 should never never exceed Breaking Load Capacity, Capacity, also also known known as as Breaking Capacity or Load Capacity, Capacity, is the minimum minimum load load Breaking Load Breaking Strength Strength Capacity or Rated Rated Load is the a complete complete assembly assembly can can withstand withstand before before failure failure in laboratory pull when the the product productisis new. new. Do Do not not use useBreaking Breaking a in aa laboratory pull test test when StrengthCapacity Capacity or or Breaking Breaking Load Load Capacity Capacity as as aa criterion for service purposes.Refer Refer to tothe theWorking WorkingLoad Load Limit. Limit. Strength criterion for service or or design design purposes. For to product product must must be beof ofequal equalor orgreater greaterstrength. strength.Avoid Avoid side side For adequate adequate safety safety protection, protection, components components to to be be attached attached to loading. applied uniformly uniformly as as aa straight straight line line pull pull only. only. loading. Load Load should should be be applied
UaDX'AlllaDMI--
Load is Load capacities capacitiesare arebased basedupon upon testing testing under under controlled controlled laboratory laboratory conditions conditions at atroom roomtemperature temperature and and when when the the product product is new. exposure to to salt salt water, water, etc. new. Unusual Unusual conditions conditions such such as as extreme extreme high high and and low low temperatures, temperatures, chemical chemical exposure, exposure, constant constant exposure etc. need to be be considered consideredininyour yourselection selectionand andmay maynecessitate necessitatea areduction reductionofofthe theWorking WorkingLoad LoadLimit. Limit. It It is need to is the the user’s user's responsibility responsibility to determine determine suitability suitability of of aa product for any is provided. to product for any particular particular use use with with the the information information that that is provided.
Tie Downs & Door Holders
Tie Down Tie Down Information Information
Forged Forged Tie Tie Downs Downs Part Part Number Number
866 866 866ZN efi:g9 866ZN
Description Description
Finish Finish
Working Working Load Limit Load Limit
forged steel forged steel
mill mill
4,000 lb. 4,000 lb.
zinc zinc plated plated
forged steel forged steel
.75 19.1 .75[19.1] .18 4.6 .18[4.6]
1.96 49.8 1.96[49.8] CL
4,000 lb. 4,000 lb.
partsshipped shippedunassembled unassembledinside inside aa sealed sealed polybag polybag I parts 2.07 52.5 2.07[52.5] CENT. CENT.
3.27 83.0 3.27[83.0]
SQ. HOLES HOLES .409 10.40 SQ. .409[10.40] (2) (2) PLACES PLACES
.53 13.5 0.53[13.5]
Forged Forged Tie Tie Downs Downs A A
B
C
D
E
F
G
Working Working Load Limit Load Limit
867 867
1.75 1.75 [44.5] [44.5]
2.40 2.40 [61.0] [61.0]
4.34 434 [110.2] [110.2]
4.35 435 [110.5] [110.5]
1.26 1.26 [32.0] [32.0]
.374 .374 [9.50] [9.50]
Ø.67 0.67 [17.0] [17.0]
6,000 lb. 6,000 lb.
forged forged steel steel
mill mill
868 868
1.75 1.75 [44.5] [44.5]
2.40 2.40 [61.0] [61.0]
4.47 4.47 [113.5] [113.5]
4.46 4.46 [113.3] [1133]
1.26 1.26 [32.0] [32.0]
.374 .374 [9.50] [9.50]
Ø.77 0.77 [19.6] [19.6]
9,000 9,000 lb. lb.
forged forged steel steel
mill mill
869 869
1.97 1.97 [50.0] [50.0]
2.40 2.40 [61.0] [61.0]
4.91 4.91 [124.7] [124.7]
4.93 4.93 [125.2] [125.2]
1.46 1.46 [37.1] [37.1]
.374 .374 [9.50] [9.50]
Ø.96 0.96 [24.4] [24.4]
15,500 lb. 15,500 lb.
forged forged steel steel
mill mill
870 870
1.97 1.97 [50.0] [50.0]
2.40 2.40 [61.0] [61.0]
5.89 5.89 [149.6] [149.6]
4.90 4.90 [124.5] [124.5]
1.46 1.46 [37.1] [37.1]
.374 .374 [9.50] [9.50]
Ø.96 0.96 [24.4] [24.4]
15,500 lb. 15,500 lb.
forged forged steel steel
mill mill
Part Part Number Number
Material Material
Finish Finish
partsshipped shippedunassembled unassembledinside inside aa sealed sealed polybag polybag I parts B B CL
E
A
F
C
D Request Info
1-800-453-1692 www.aboveboardelectronics.com
G
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
315
Tie Downs & Door Holders
SIERRA PACIFIC EP ---rERING AND PRODUCTS 1,200 lb. Tie Tie Down 1,200 lb. Down Rings Rings
.64 16.33] 64[16
C 3 1.19 30.2 1 19[30 2] 3.54 89.8 03.54[89.8] STEEL BASE BASE STEEL
0
C
Part Part Number Number
4.00 101.60 04.00[101.60] PLASTIC BASE PLASTIC BASE
Plastic Breaking Breaking Plastic Base LoadCapacity Capacity Base Load
Material Material
Finish Finish
858 858
steel steel
zinc plated zinc plated
yes yes
1,200 lb. 1,200 lb.
858-01 858-01
steel steel
zinc plated zinc plated
no no
1,200 lb. 1,200 lb.
black plastic plastic base I black base is is not not included included with withpart partno. na 858-01 858-01 Ø.250 [65] [6.35]steel steelD-ring D-ring I 0.250 .063 [1.60] [1.60] thick D-ring holder I .063 thick base base and and D-ring holder
Vi to
7.15 0 .281 281[7 5]
-••••=1011/
(2) HOLES HOLES (2)
1,200 lb. Tie Tie Down Ring 1,200 lb. Down Ring Part Part Number Number
4.17 [106.0] 106.0 04.17
O
2.05 [52.0] 52.0 2.05
863ZN 863ZN
Material Material
Finish Finish
Breaking Breaking Load Load Capacity Capacity
steel steel
zinc plated zinc plated
1,200 lb. 1,200 lb.
Material Material
Finish Finish
Breaking Breaking Load Load Capacity Capacity
steel steel
zinc plated zinc plated
1,200 lb. 1,200 lb.
.059 [1.50] [1.50] thick I .059 thick base base 1.06 27.0 50
1.85 47.0 1.65[47.0
1.94 49.4 9.4]
.2362 [6.000] 6.000 0.2362 WIRE WIRE .276 S. 7.00 0.276 (2) HOLES HOLES (2)
1,200 lb. Tie Tie Down Ring 1,200 lb. Down Ring Part Part Number Number
.41 10.4 .41[10.4] .08 2.0 .08[2.0]
3.56 90.3 3.56[90.3]
856 856
Ø.236[6.00] [6.00] wire wire I 0.236 .079 [2.00] [2.00] thick wire holder I .079 thick base base and and wire holder
2.00 50.8 2.00[50.8]
5.00 127.0 5.00[ 27.0]
4.00 101.6 4.00[101.6]
.356 9.04 HOLE HOLE 0.356[9.04] x 82 CSINK C'SINK .82° (3) PLACES PLACES (3) FRONT VIEW FRONT VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
1,200 Ring 1,200 lb. lb.Tie TieDown Down Ring CD A
Part Part Number Number
.47 12.0 .47[12.0]
.256 6.50 (2) HOLES
858-05 858-05 TAB
033.94
2.25 57.2
100.0
.90 22.8
Material Material
Finish Finish
Breaking Breaking Load Load Capacity Capacity
steel steel
zinc plated zinc plated
1,200 lb. 1,200 lb.
black plastic plastic base I black base tabon onplastic plasticbase baseprovides provides aa snug snug fit fit that prevents ring ring I tab that prevents from rattling holds it it in in place from rattling and and holds place at at any any position position Ø.236[6.00] steel steel D-ring D-ring I 0.236[6.00] .059[1.50] thick thick D-ring I .059[1.50] D-ring holder holder
.409 10.40 HOLE
SECTION A-A SECTION A-A
A
1,500 lb. Tie Tie Down Ring 1,500 lb. Down Ring Part Part Number Number
4.08 103.6 04.08[103.6] .265 6.73 HOLE HOLE 0.265[6.73]
857 857 1.14 29.0
1.19 30.2
.406 10.31 HOLE
316 316
Download 3DmoDELs @ @www.spep.com www.spep.com Download
Material Material
Finish Finish
Breaking Breaking Load Load Capacity Capacity
steel/plastic steel/plastic
zinc plated zinc plated
1,500 lb. 1,500 lb.
black plastic plastic base I black base Ø.250[635] [6.35]steel steel D-ring D-ring I 0.250 .059[1.50] [1.50] thick I .059 thick D-ring D-ring holder holder ►D-ring D-ring assembly assembly can can be be purchased purchased separately separately as as part part number number 857-01 857-01
.315 8.00 HOLE
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges bfrrdWare Hi -nes and and Industrial Industrial Hardware
Material Material
Finish Finish
Breaking Breaking Load Load Capacity Capacity
891ZN 891ZN
steel steel
zinc plated zinc plated
2,000 lb. 2,000 lb.
891SS 89155
304SS 304SS
mill mill
2,000 lb. 2,000 lb.
891M 891M
steel steel
mill mill
2,000 lb. 2,000 lb.
Part Part Number Number
3.73[94.7] 3.73 94.7
.98 24.9 .98[24.9]
1.35 [34.3] 34.3 01.35
3.13 79.4 3.13[79.4] CENT. CENT.
3.98 101.0 3.98[ 101.0 ]
Ø.433[11.00] [11.00] thick thick ring I 0.433 ring .126 [3.20] [3.20] thick I .126 thick base base .287 7.30 7.30 ] .287[
2.88 73.0 2.88[73.0] CENT. CENT.
.126 3.2
WITH 82 °C'SINK C'SINK TH 82 (4) PLACES PLACES (4)
6,000 lb. lb. Tie Tie Down 6,000 Down Rings Rings Part Part Number Number
Material Material
Finish Finish
Holes Holes
890ZN 890ZN
steel steel
zinc plated zinc plated
Ø.406 0.406 [10.31] [1031]
890ZN-01 890ZN-01
steel steel
zinc plated zinc plated
.391 [9.93] [9.93] sq. 391 sq.
890SS-01 89055-01
304SS 304SS
passivated passivated
.391 [9.93] [9.93] sq. 391 sq.
4.50 114.3 4.50[ 114.3] 3.00 [78.21 76.2 3.00 CENT.
Tie Downs & Door Holders
2,000 lb. Tie Tie Down 2,000 lb. Down Rings Rings
.90 (22.9] 22.9 .90
Ø.433[11.00] [11.00] thick thick ring I 0.433 ring .118 [3.00] [3.00] thick I .118 thick base base 6,000 lb. lb. breaking I 6,000 breaking load load capacity capacity
22.2 .88 [22.2]
round round holes holes part 890ZN part no. no. 890ZN
Back Back Support Support Plate Plate
4.88 123.8 4.88] 23.8]
3.25 82.8] 82.6 3.25[
Part 890BP PartNo. No. 890BP back for: back support support for: 890ZN and 890ZN-01 890ZN and 890ZN-01 .118 [3.000] 3.000 .118
.406 10.31 OR OR.391 .391 SO. SQ. 0.406[10.31] (4) PLACES PLACES (4)
1.38 [34.9] 34.9 01.38
steel material: steel I material: finish: zinc zinc plated I finish: plated size: I size: 6.50 [165.1] [165.1] sq. 6.50 sq. xx .098 .098 [2.50] [2.50] thick. thick.
sq. holes sq. holes part 890ZN-01 part no. no. 890ZN-01
6,000 lb. lb. Tie Tie Down 6,000 Down Rings Rings Part Part Number Number
Material Material
Finish Finish
1.08 27.3
Breaking Breaking Load Load Capacity Capacity
895 895
steel steel
zinc plated zinc plated
6,000 lb. 6,000 lb.
895SS 89555
304SS 304SS
electropolished electropolished
6,000 lb. 6,000 lb.
895M 895M
steel steel
mill mill (pan (pan only) only)
6,000 lb. 6,000 lb.
A A-47
.125 3.18
5.380 136.65 05.380[196.85]
car crtv 3.500 88.90 09.500[88.90]
6.11 155.2
.250[6.35] [6.35] thick thick ring I .250 ring .125 [3.18] [3.18] thick I .125 thick base base
.250 6.35 0.250[6.95] (4) HOLES
.75 19.1
.334 8.48 0.334[8.48] HOLES (4) HOLES
A
SECTION A-A SECTION A-A
3,750 TieDown DownRing Ring E 3,750 lb.lb. Tie Part Part Material Number Material Number 898 898
steel steel
Finish Finish
Breaking Breaking Load Load Capacity Capacity Per Per Ring Ring
zinc plated zinc plated
3,750 lb. 3,750 lb.
3.80 96.5 TYP.
1.00 25.4 1.88[25.4]
A
Ø.400[10.16] [10.16] thick thick forged I 0.400 forged rings rings .120 [3.05] [3.05] thick I .120 thick base base 6.25 158.8] 158.8 956.25
5.37 136.5
A
4.50 110.9] 114.3 04.50
.266 6.76 (4) HOLES .120 3.05 SECTION A-A
Request Info
1-800-453-1692 www.aboveboardelectronics.com
patented
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
317
Tie Downs & Door Holders
SIERRA PACIFIC ENGINEERING AND PRODUCTS
O
Tie Off Tie Off Rings Rings
dou
Material Material
Finish Finish
Breaking Breaking Load Load Capacity Capacity
880 880
aluminum aluminum casting casting
tumbled tumbled
1,300 lb. 1,300 lb.
880-01 880-01
aluminum aluminum casting casting
polished polished
1,300 lb. 1,300 lb.
Material Material
Finish Finish
Breaking Breaking Load Load Capacity Capacity
880SS-02 88055-02
304SS 304SS
tumbled tumbled
3,500 lb. 3,500 lb.
880SS* 88055*
304SS 304SS
tumbled tumbled
3,500 lb. 3,500 lb.
Part Part Number Number
4.00 101.6 4.00[101.6]
.433 11.00 0.433[11.00] WITH 82° 82 C'SINK WITH C.SINK (2) (2) HOLES HOLES
.57 14.5 .57[14.5]
1.75 44.5 1.75[44.5]
R 1.03[26.2] 1.03 26.2
Tie Off Tie Off Rings Rings with with Groove Groove
C
4.00 101.6 4.00[101.6]
.433 11.00 0.433[11.00] TYP. TYP.
O
.57 14.5 .57[14.5]
Part Part Number Number
part no. no. 88055-02 880SS-02 is I part is shipped shipped with with (2) (2) rubber rubber gaskets gaskets * part part no. no. 880SS does not not include include gaskets I* 88055 does gaskets 1.75 44.4 1.75[44.4]
.031 .79 031[.794
R.97 24.6 R.97[24.6]
Two Piece Tie Off Off Ring Two Piece Tie Ring Part Part Number Number
2.60 66.1
885-01 885-01
Material Material
Finish Finish
Breaking Breaking Load Load Capacity Capacity
aluminum aluminum
polished polished
1,000 lb. 1,000 lb.
Material Material
Finish Finish
steel steel
nickel nickel
Ø.438[11.13] [11.13] ring I 0.438 ring thickness thickness
1.87 47.6
.406 10.32 (2) HOLES
D-Rings D-Rings
width width
Part Part Number Number
Wire Dia. Wire Dia.
D127 D127
.236 [6.00] 1.50[38.1] [38.1] .236 [6.00] 1.50
D200 D200
.236 [6.00] 2.17[55.1] [55.1] .236 [6.00] 2.17
steel steel
nickel nickel
D200SS D20055
.236 [6.00] 2.13[54.1] [54.1] .236 [6.00] 2.13
304SS 304SS
electropolished electropolished
Width Width
Tie Downs Tie Downs .257 6.53 0.257[6.53]
1.25 31.8 1.25[31.8]
(2) HOLES HOLES (2)
1.58 40.1 1.58[40.1]
.94 23.8 .94[23.8]
Part Wire Dia. Dia. PartNumber Number Wire
Width Width
Breaking Load Breaking Load Capacity Capacity
860 860
steel steel
zinc plated zinc plated
1,000 lb. 1,000 lb.
860SS 86055
304SS 304SS
electropolished electropolished
1,500 lb. 1,500 lb.
Ø.236[6.00] [6.00] steel steel D-ring D-ring I 0.236 .074[1.88] [1.88] thick I .074 thick D-ring D-ring holder holder partsshipped shippedunassembled unassembledinside inside aa sealed sealed polybag polybag I parts 1.50 38.1 1.50[38.1]
Tie Down Tie Down 1.87 47.6 1.87[47.6]
Part Part Number Number
859 859 2.31 58.7
2.68 68.1
Wire Dia. Wire Dia.
Width Width
Breaking Load Breaking Load Capacity Capacity
steel steel
zinc plated zinc plated
3,000 lb. 3,000 lb.
Ø.375[9.53] [9.53] steel steel D-ring D-ring I 0.375 .135[3.43] [3.43] thick thick D-ring I .135 D-ring holder holder partshipped shippedunassembled unassembledinside inside aa sealed sealed polybag polybag I part
2.18 55.4
318 318
Download 31)moDELs @ @www.spep.com www.spep.com Download
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges Hinges and and Industrial industrial Hardware Hardware
Part Part Number Number
Material Material
Finish Finish
Breaking Breaking Load Load Capacity Capacity
steel steel
zinc plated zinc plated
3,500 lb. 3,500 lb.
861 861 861SS 86155
304SS 304SS
electropolished electropolished
.79 20.0
Ø.236[6.00] [6.00] steel steel D-ring D-ring I 0.236 I .138 thick D-ring D-ring holder holder .138[3.50] [3.50] thick partsshipped shippedunassembled unassembledinside inside aa sealed sealed polybag polybag I parts
Part Part Number Number
807 807
Material Material
Finish Finish
steel steel
mill mill
fD
.264 6.71 (2) HOLES
0
O
2.17 55.0
3,500 lb. 3,500 lb.
Tie Downs & Door Holders
Tie Downs Tie Downs
s
1.47 37.3 1.35 34.3
.236 6.00 0.236[6.00]
Res 0 Steel Steel JJ Hook Hook O
1.03 26.2 1.03[26.2]
O
2.62 66.5
.500 12.70 --•-• 0 .500[12.70]
O
33°
3.00 76.2
R.60 15.2
Locker Locker Hook Hook Part Part Number Number
804 804
Material Material
Finish Finish
steel steel
zinc plated zinc plated
.074 [1.88]
.39 [9.9] . 500 [12.70]
.750 [19.05]
.23 .23 [5.9] [5.9]
2.63 [66.7] Ø.219 [5.56]
1.22 [30.9] 1.63 [41.3]
Ø.191
[4.80] [4.80]
Locker Locker Hook Hook Part Part Number Number
805 805
Material Material
Finish Finish
steel steel
zinc plated zinc plated
.177[4.50] .177 4.50
.59 15.0 69[15.0] .44 11.1 A4[11.1 1.20 30.6 12o[30.13]
3.65 92.7 .256 6.50 .250[0.50] (2) (2) HOLES HOLES
1.37 34.9 1-37[348]
1.90 48.1
.354 9.00 ROD ROD 0.354[9.00]
Forged Forged Chain Chain Retainers Retainers Chain Chain Size Size
Breaking Breaking Load Load Capacity Capacity
A A
B B
C C
D D
D387 D387
5/16 5/16 [8.0] [8.0]
10,000 lb. 10,000 lb.
.50 .50 [12.7] [12.7]
3.25 3.25 [82.6] [82.6]
3.75 3.75 [95.3] [953]
1.18 1.18 [30.0] [30.0]
.72 039 Ø.39 1.28 1.28 1.22 1.22 .72 [18.3] [9.9] [9.9] [32.5] [32.5] [31.0] [31.0] [18.3]
D388 D388
3/8 3/8 [9.5] [9.5]
25,000 25,000 lb. lb.
.60 .60 [15.2] [15.2]
3.59 3.59 [91.2] [91.2]
4.16 4.16 [105.7] [105.7]
1.30 1.30 [33.0] [33.0]
.75 0.47 Ø.47 1.57 1.57 132 1.32 .75 [19.1] [11.9] [11.9] [39.9] [39.9] [33.5] [33.5] [19.1]
1/2 1/2 [12.7] [12.7]
32,000 lb. 32,000 lb.
.73 .73 [18.5] [18.5]
3.82 3.82 [97.2] [97.2]
4.50 4.50 [114.3] [1143]
1.30 1.30 [33.0] [33.0]
.90 Ø.70 1.77 1.59 1.77 .90 0.70 1.59 [23.2] [17.0] [17.0] [45.0] [45.0] [403] [40.3] [23.2]
Part Part No. No.
61P D388-01 D388-01
EE
FF
G G
H H
5/16" retainer 5/16" retainer part part no. no. D387 D387
3/8" retainer 3/8" retainer part part no. no. D388 D388
aidsfor for replacement replacementof of damaged damagedor orworn wornsafety safetychains chainsquickly quickly and and easily easily I aids finish: mill mill with I finish: withzinc zincplated platedcomponents components seepg. pg.315 315for for working working load load limit limit information I see information A
FULL R. B TOP VIEW VIEW TOP
1/2" 1/2" retainer retainer part part no. no. D388-01 D388-01
G
C D F
H
E
FRONT VIEW FRONT VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
RIGHT VIEW RIGHT SIDE SIDE VIEW
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
319 319
Tie Downs & Door Holders
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Footman Loops Loops Footman Part Part Number Number
Material Material
Finish Finish
Dim. Dim. A A
Dim. Dim. B
Dim. Dim. C
Dim. Dim. D
Dim. Dim. E
Dim. Dim. F
Hole Dia. Hole Dia.
9901ZN 9901ZN
steel steel
zinc plated zinc plated
2.13 2.13 [54.1] [54.1]
2.67 2.67 [67.8] [67.8]
1.12 1.12 [28.5] [28.5]
Ø.25 0.25 [6.4] [6.4]
.25 .25 [6.4] [6.4]
.15 .15 [3.8] [3.8]
Ø.20 [5.1] xx 82° 0.20 [5.1] 82° c’sink c'sink
9901SS 990155
304SS 304SS
passivated passivated
2.13 2.13 [54.1] [54.1]
2.67 2.67 [67.8] [67.8]
1.12 1.12 [28.5] [28.5]
Ø.25 0.25 [6.4] [6.4]
.25 .25 [6.4] [6.4]
.15 .15 [3.8] [3.8]
Ø.20 [5.1] xx 82° 0.20 [5.1] 82° c’sink c'sink
9902ZN 9902ZN
steel steel
zinc plated zinc plated
2.24 2.24 [56.9] [56.9]
2.79 2.79 [70.9] [70.9]
1.37 137 [34.8] [34.8]
Ø.25 0.25 [6.4] [6.4]
.25 .25 [6.4] [6.4]
.15 .15 [3.8] [3.8]
Ø.24 [6.1] xx 82° 0.24 [6.1] 82° c’sink c'sink
9902SS 990255
304SS 304SS
passivated passivated
2.24 2.24 [56.9] [56.9]
2.79 2.79 [70.9] [70.9]
1.37 137 [34.8] [34.8]
Ø.25 0.25 [6.4] [6.4]
.25 .25 [6.4] [6.4]
.15 .15 [3.8] [3.8]
Ø.24 [6.1] xx 82° 0.24 [6.1] 82° c’sink c'sink
C
9903ZN 9903ZN
steel steel
zinc plated zinc plated
2.63 2.63 [66.8] [66.8]
3.17 3.17 [80.5] [80.5]
1.61 1.61 [40.9] [40.9]
Ø.25 0.25 [6.4] [6.4]
.31 31 [7.9] [7.9]
.15 .15 [3.8] [3.8]
Ø.24 [6.1] xx 82° 0.24 [6.1] 82° c’sink c'sink
O
9903SS 990355
304SS 304SS
passivated passivated
2.63 2.63 [66.8] [66.8]
3.17 3.17 [80.5] [80.5]
1.61 1.61 [40.9] [40.9]
Ø.25 0.25 [6.4] [6.4]
.31 31 [7.9] [7.9]
.15 .15 [3.8] [3.8]
Ø.24 [6.1] xx 82° 0.24 [6.1] 82° c’sink c'sink
9904ZN 9904ZN
steel steel
zinc plated zinc plated
3.09 3.09 [78.5] [78.5]
3.64 3.64 [92.5] [92.5]
2.09 2.09 [53.1] [53.1]
Ø.28 0.28 [7.1] [7.1]
.31 31 [7.9] [7.9]
.16 .16 [4.1] [4.1]
Ø.24 [6.1] xx 82° 0.24 [6.1] 82° c’sink c'sink
9904SS 990455
304SS 304SS
passivated passivated
3.09 3.09 [78.5] [78.5]
3.64 3.64 [92.5] [92.5]
2.09 2.09 [53.1] [53.1]
Ø.28 0.28 [7.1] [7.1]
.31 31 [7.9] [7.9]
.16 .16 [4.1] [4.1]
Ø.24 [6.1] xx 82° 0.24 [6.1] 82° c’sink c'sink
O 0
notintended intendedfor forload loadbearing bearing applications applications I not HOLE DIA. HOLE DIA. (2) PLACES PLACES (2)
D
A
B B
4
E
1 F F
C C
1\
I -1-
Large Footman Large Footman Loop Loop Part Number Part Number
9905ZN 9905ZN
Material Material
Finish Finish
steel steel
zinc plated zinc plated
notintended intendedfor forload loadbearing bearing applications applications I not
.236 [6.00] 6.00 0.236 (2) HOLES HOLES (2)
.50 [12.7] 12.7 .50
.63 [16.0] 16.0 .63
CL
4.22 [107.2] 107.2 4.22
5.00 127.0 5.00 [127.0]
1.25 31.8
1.00 25.4
.19 4.8
2.75 69.9 CENT.
Request Info
320 320
Download Download 31:Immo @@www.spep.com www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
J2036 J2036
Material Material
Finish Finish
aluminum aluminum
tumbled smooth smooth tumbled
.89 22.6
3.20 81.4
A
.050 1.27
.472 12.00
1.90 48.3
.219 5.56 (3) HOLES
A A-4-
SECTION A-A SECT ON A-A
RV Products
Switch Cup Switch Cup Part Part Number Number
=PliWrIl
Hinges and Hinges and Industrial Industri -1 Hardware Hardware
Plastic Switch Cup Cup Plastic Switch Part Part Number Number
Material Material
Finish Finish
J2036P-02 J2036P-02
glass reinforced glass reinforced nylon nylon with UV UV inhibitors with inhibitors
black black with with top top surfaces surfaces textured textured
3.21 81.5
1.18 30.0 LAe(so.o] .091 2.3 .281)2
.220 5.60 (3) PLACES
A
I
30°
strong and durable
.94 24.0
2.76 70.0 02.70[70.0
Ø.472 [12.00] 4202001 SECTION A-A
A
Plastic Switch Cupwith with(4) (4)Knockouts Knockouts 13 Plastic Switch Cup Part Part Number Number
Material Material
Finish Finish
J2036P-01 J2036P-01
glass reinforced glass reinforced nylon nylon with UV UV inhibitors with inhibitors
black black with with top top surfaces surfaces textured textured
4.75 [12.1] KNOCKOUT (4) PLACES
4.46 [113.3]
1.95 [49.5]
3.21 [81.5]
strongand and durable durable I strong
2.76 [70.1]
Ø.219 [5.56] (4) PLACES
3.02 [76.7] 4.01 [101.9]
.090 [2.29]
1.00 [25.4] 1.00125.01
Aluminum Vent Aluminum Vent
I Part Number Material Part Nunilmil ser lill=
J6020 J6020
aluminum aluminum
Finish
7.80 198.1 07.80[198.1]
.60 15.2 .60[152
brushed brushed
gasketavailable availableseparately separately as as part J6020-G I gasket part no. no. J6020-6
6.50 165.1] 165.1 0650
5.65 143.5 05.65[143.5]
COIN C'SUNK COIN CSUNK FOR #8 FHS FHS FOR A008 (4) (4) PLACES PLACES
.27 6.9 27[13.9]
ABS Plastic ABS Plastic Vent Vent Part Part Number Number
Material Material
Finish Finish
P1020 P1020
ABS ABS
natural, smooth natural, smooth
P1020BK P1020BK
ABS ABS
black, black, smooth smooth
■
10.22 [259.6] 259.6 10.22
.70 17.7 10.07 255.8 10.07[255.8] TOP VIEW
12.19 309.6
.188 4.76 (12) HOLES
.13 3.2 .13[3.2]
2.41 61.1
8.88 225.4
3.56 90.5
7.10 180.2 7.10[ 80.2]
2.41 61.1
3.88 98.7 3.88(98.7]
3.92 99.5 3.92[99.5] FRONT VIEW FRONT VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
3.88 98.7 3.88[98.7]
.39 9.8 .39[9.8] RIGHT SIDE VIEW MMITSWEVEW
To Place 800.433.5554 To PlaceOrder: Order ta 800.433.5554
[email protected] [email protected]
321 321
RV RVScreen Screen Door Door Latches Latches RV Screen Latches RV Screen Door Door Latches mountingscrews screws not not included included I mounting high impact impact plastics plastics I high stainless steel steel spring spring I stainless
I I
M M.Mr RV Products
SIERRA PACIFIC ENGINEERING AND PRODUCTS
screen door screen door
installation installation view view wall wall
outside outside door door
door frame door frame keeper keeper outside outside door strike door strike
screen door door latch latch screen
Left Left and and Right Right Hand HandLatches Latcheswith with3.09 3.09 [78.5] [78.5] Mounting Mounting Centers Centers
.77 19.4 .77[19.4]
4.1 104 4.1[104] 1.14 29.1 1.14[29.1]
Part Part Number Number
Description Description
1170-01 1170-01
left latch, strike strike & & left hand hand latch, keeper keeper
1171-01 1171-01
right latch, strike strike & & right hand hand latch, keeper keeper
1170 1170
left latch left hand hand door door latch
1171 1171
right door latch latch right hand hand door
1172 1172
outside door strike strike outside door
1173 1173
door frame frame keeper door keeper
.85 21.6 .85[21.6]
.28 7.1 .28[7.1] .97 24.6 .97[24.6]
.47 11.9 .47[11.9]—w-1
1.14 28.8 1.14[28.8]
OUTSIDE DOOR DOOR STRIKER STRIKER OUTSIDE 3.69 93.8 3.69[93.8]
3.09 78.5 3.09[78.5] 1.56 39.7 1.56[39.7]
.25 6.4
b
1.13 28.6 .156 3.96 xx.336 .336[8.53] [8.53]OBROUND OBROUNDWITH WITH .156[3.96] .328 [8.33]x .508 .508 [12.90] [12.90] x x .085 .085 [2.16] [2.16] DEEP C'BORE .32818.33]x DEEP C'BORE (2) PLACES (2) PLACES LEFT LATCH LEFT HAND HAND DOOR DOOR LATCH
322 322
2.19 55.6]—w. 55.6 -.-2.19[
.15 3.8 .15[3.8]—w] k--
DOOR FRAME KEEPER DOOR FRAME KEEPER
Request Info
Download Download 3DmoDE @@www.spep.com www.spep.com
1-800-453-1692 www.aboveboardelectronics.com
Description Description
1136 1136
latch, strike strike & & keeper latch, keeper
1135 1135
door latch door latch
1135S 11355
outside door strike outside door strike
1135K 1135K
door frame frame keeper keeper door
maybe beused used for for aa left I may left or or right right hand hand door door
4.1 104 4.1[104]
.28 7.1 .28[7.1]
.76 19.4 .76[19.4]
.85 21.6 .85[21.6]
RV Products
Bidirectional Latch Centers Bidirectional Latch with with 3.00 3.00 [76.2] [76.2] Mounting Mounting Centers Part Part Number Number
=PliWrIl
Hingesand andIndustrial Industrial Hardware Hardware Hines
patented patented
1.14 29.1 1.14[29.1] .97 24.6 .97[24.6]
40111, .38 9.6 .38[9.6]
1.14 28.8 1.14[28.8] 3.69 93.8 3.69[93.8]
I•—
OUTSIDE OUTSIDE DOOR DOOR STRIKER STRIKER
3.00 76.2 3.00[76.2]
.25 6.4
1.56 39.7 1.56[39.7]
1.13 28.6 .339[8.60] [8.60] OBROUND OBROUND WITH WITH .165 4.20 xx.339 .165[4.20] .331 [8.40] [8.40] xx .504 .504 [12.80] [12.80] xx .060 .060 [1.52] [1.52] DEEP DEEP C'BORE C'BORE .331 (2) PLACES, ON BOTH SIDES
2.19 55.6 2.19[55.6
DOOR LATCH LATCH DOOR
.15 3.8
DOOR FRAME FRAME KEEPER DOOR KEEPER
Economy Latch Centers Economy Latchwith with 2.40 2.40 [61.0] [61.0] Mounting Mounting Centers Part Part Number Number
Description Description
1131LH 1131LH
left hand door left hand door latch latch
1131RH 1131RH
right hand door door latch right hand latch
1131S 11315
outside door strike outside door strike
1131K 1131K
door frame frame keeper keeper door
1132LH 1132LH
left hand hand polybagged left polybagged kit kit with latch, latch, strike strike & & keeper with keeper
1132RH 1132RH
right hand hand polybagged right polybagged kit kit with latch, latch, strike strike & & keeper with keeper
.39 10.0 ]—•-• .39[10.0
3.89 98.8 3.89[98.8]
1.95 49.5 -.-1.95[49.5
1.06 26.9 1.06[26.9]
1.01 25.7 1.01[25.7] 1.02 25.8 1.02[25.8]
c))
tv 2.6667.5 67.5 ] -.-2.66[
1 2.40 61.0 2.40[61.0]
2.91 74.0 2.91[74.0]
OUTSIDE DOOR OUTSIDE DOOR STRIKER 1.38 34.9 ] ► 1.38[34.9
4.7 OBROUND OBROUND WITH .500 [12.70] [12.70] xx .185 .185[4.7] .665 [16.89] x .350 [8.89] x .063 [1.60] DEEP C'BORE (2) PLACES
RIGHT HAND DOOR LATCH
Request Info
1-800-453-1692 www.aboveboardelectronics.com
.55 14.0 .55[14.0]—.]
I
I
2.00 50.8 2.00[50.8]
.17 4.4 .17[4A] 1.00 25.4] 25.4 1.00[ s .15 3.7 3.7 .15[
DOOR FRAME KEEPER KEEPER
To Place 800.433.555411111
[email protected] To PlaceOrder: Order ta 800.433.5554
[email protected]
323 323
Full License Full LicensePlate PlateHolder Holder CO
I I
M M.Mr RV Products
SPrgeRA PACIFIC ENGINEERING AND PRODUCTS
14.43 [366.5] 366.5 14.43 .200 [5.08] 5.08 0.200 (2) PLACES
Part Part Number Number
Color Color
P1050BK P1050BK
black black
P1050G P1050G
gray gray
P1050W P1050W
white white
Material Material UV resistant UV resistant plastic plastic with smooth smooth finish finish with
(2)stainless stainless steel steel license license plate I (2) plate mounting screws included mounting screws included
7.00[177.8] 177.8 - 7.00 -1.68 42.7 1.68142.71
8.36 [212.4] 212.4 3.74 3.74 [95.0] 95.0 8.36
.190 [4.83] 4.83 0.190 (4) HOLES
10.17 [258.3] 258.3 10.17
.74 18.8 .74[18.8] -
FRONT VIEW FRONT VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
Flat License Flat LicensePlate PlateHolder Holder CO
2.74 .250 6.35 0.250[6.35] (2) HOLES HOLES (2)
69.6
2.71 68.8 2.71[68.8]
2.00 50.8
1.005 25.53
4.18 106.2 4.18[106.2]
.18 4.6 .18[4.6]
.180 4.6
.130 3.31 (2) HOLES
.150 3.81 (2) HOLES
4.21 106.9
.98 24.9 .98[24.9]
7.60 193.0 7.60[193.0]
Color Color
P1051BK P1051BK
black black
P5051G P5051G
gray gray
P1051W P1051W
white white
.270 6.86 0.270[6.86] 1.14HOLES 29.1 (2) HOLES (2)
Material Material UV resistant UV resistant plastic plastic with smooth smooth finish finish with
2.00 50.8 2.00[50.8]
.405 [10.29] 10.29 0.405
.313 7.95 (2) HOLES
5.52 140.3
Part Part Number Number
—1—.270[6.86] .270 A 6.86
.23 [5.7] 5.7 .23
3.64 92.5 3.64[92.5]
6.06 153.9 6.06[153.9]
.50 12.7 .50[12.7]
7.00 177.7 7.00[177.7]
RIGHT SIDE SIDE VIEW RIGHT VIEW
FRONT VIEW FRONT VIEW A
8.00 203.2 VIEW Offset License License Plate Holder Offset PlateFRONT Holder
REAR VIEW REAR VIEW
10°
1.14 29.1 REAR VIEW
RIGHT SIDE VIEW
.290 [7.37] 7.37 0.290 (2) HOLES
177.8 7.00 [177.8] 152.0 5.99 1152.01 .525 [13.34] [13.34] xx .290 .290 [7.37] .525 [7.37] (2) OBROUNDS
13.0 .51 [13.0]
Part Part Number Number
Color Color
P1052BK P1052BK
black black
P5052G P5052G
gray gray
P1052W P1052W
white white
Material Material UV resistant UV resistant plastic plastic with smooth smooth finish finish with
SECTION A-A SECTION A-A
2.74 69.6 .180 [4.6] 4.6 .180
2.00 50.8
.130 3.31 (2) HOLES
1.14 29.1
1.005 25.53 .150 3.81 (2) HOLES
.313 7.95 (2) HOLES
5.52 140.3
4.21 106.9
A A
A
10° 10°
8.00 [203.2] 203.2 8.00 FRONT VIEW FRONT VIEW
324 324
Download www.spep.com Download3DmoDELs @ @ www.spep.com
RIGHT SIDE SIDE VIEW VIEW RIGHT
.290 7.37 (2) HOLES
7.00 177.8 5.99 152.0
1.14 29.1 REAR VIEW REAR VIEW
Request Info
1-800-453-1692 www.aboveboardelectronics.com
875SS 87555
Material Material
Finish Finish
304SS electro-polished electro-polished 304SS
875ZN 875ZN
cast cast steel steel
zinc plated zinc plated
875BK 875BK
cast cast steel steel
black black e-coated e-coated
3.95 100.3 3.95[100.3]
3.94 [100.2] 100.2 3.94
.57 14.5
1.36 [34.5] 34.5 1.36
RV Products
Small Steps Small Folding Folding Steps Part Part Number Number
=PliWrIl
Hinges and Industrial Hardware Hinges ind Incir•ctrial I-frrdware
2.05 52.0 5.42 [ 137.7 3.92 99.5 3.92 [99.5] 5.42 37.7] 4.69 119.0 4.69[ 19.0] .37 [9.5] 9.5 .37
II .41 10.5 .41[10.5] .45 [11.5] 11.5 .45
.374 [9.5] 9.5 HOLE HOLE WITH WITH 0.374 .57[14.4] [14.4] xx 82° 82 C'SINK 0.57 (2) PLCS, PLCS, BOTH BOTH SIDES SIDES (2)
1.42 [36.0] 36.0 1.42
1.88 [47.7] 47.7
.94 [24.0] 24.0 .94
FRONT VIEW VIEW FRONT
RIGHT SIDE VIEW
Large Folding Large Folding Step Step with with Gasket Gasket Part Number
874CH 874CH
Material
Finish
die cast zinc die cast zinc
textured textured chrome chrome
includes gasket gasket ►includes
8.23 209.0
6.79 172.5 TOP VIEW TOP
8.52 [216.5] 216.5 8.52
8.20 0 .323 .323[8.20] (4) HOLES HOLES (4)
2.22 [56.5] 56.5 2.22
.57 [14.5] 14.5 .57
9.4 SQ. SQ. .37 [9.4] .37 (4) PLACES PLACES (4) 4.92 [125.0] 125.0 4.92
3.96 [100.5] 100.5 3.96 .67 17.0
1.52 [38.5] 38.5 1.52
3.94 [100.0] 100.0 3.94 FRONT VIEW FRONT VIEW
RIGHT SIDE SIDE VIEW RIGHT VIEW
Gate Latch Latch Gate Part Number
D379 D379
Material
Finish
steel steel
mill mill .490 12.45 0.490[12.45] 3.44 87.4 ] 3.44[87.4 1.02 25.8 1.02[25.8]
.55 14.0 .55[14.0]
2.50 63.5 1.44[36.6] 1.44 36.6 2.50[63.5]
3.14 79.8 79.8 ] 3.14[
.60 15.2 .60[15.2]
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Ito
3.50 88.8 3.50[88.8] TYP. TYP.
To Place 800.433.5554 1111
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
325
ro • uct RV Products
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Flat Top Flat Top Bumpers Bumpers Part Part Number Number
Material Color Color Material
A A
B B
C C
D D
E E
1304 1304
[12.7] Ø.50 [12.7] 0.50
.25 [6.4] .25 [6.4]
[6.0] Ø.23 [6.0] 0.23
Ø.13 0.13 [3.2] [3.2]
.15 [3.8] .15 [3.8]
black black
SBR SBR
1305 1305
[14.3] Ø.56 [14.3] 0.56
.31 [8.0] .31 [8.0]
[6.4] Ø.25 [6.4] 0.25
[3.2] Ø.13 0.13 [3.2]
.11 [2.8] .11 [2.8]
black black
SBR SBR
.25 [6.4] .25 [6.4]
black black
SBR SBR
1303 1303
[16.7] Ø.66 [16.7] 0.66
.50 [12.7] .50 [12.7]
[8.0] Ø.31 [8.0] 0.31
[4.0] Ø.16 [4.0] 0.16
1306 1306
Ø.72 [18.3] 0.72 [183]
.41 [10.3] .41 [10.3]
[8.0] Ø.31 [8.0] 0.31
[4.8] Ø.19 0.19 [4.8]
.19 [4.8] .19 [4.8]
black black
SBR SBR
.28 [7.1] .28 [7.1]
black black
SBR SBR
1307 1307
[22.2] Ø.88 [22.2] 0.88
.53 [13.5] .53 [13.5]
[9.5] Ø.38 [9.5] 0.38
[4.8] Ø.19 [4.8] 0.19
1308 1308
[38.5] Ø1.52 01.52 [38.5]
.73 [18.6] .73 [18.6]
[19.1] Ø.75 [19.1] 0.75
[6.4] Ø.25 0.25 [6.4]
.39 [9.9] .39 [9.9]
black black
SBR SBR
[9.5] Ø.38 [9.5] 038
[4.8] Ø.19 [4.8] 0.19
.50 [12.7] .50 [12.7]
black black
SBR SBR
B B
C C
D D
EE
.25 [6.4] .25 [6.4]
[6.4] Ø.25 0.25 [6.4]
1310 1310
1.75 1.75 [44.5] [44.5]
[25.4] Ø1.00 [25.4] 01.00
molded in I steel in bumper bumper washer molded steelwasher stops door stops as door appliedas typicallyapplied I typically
A C
--I
I--
B f
Radial Top Bumpers Bumpers Radial Top
e*
cast
Part' WPM Number Number
A A
Material Color Color Material
1309 1309
[19.1] Ø.75 0.75 [19.1]
Ø.13 0.13 [3.3] [33]
.13 [3.3] .13 [33]
black black
SBR SBR
1300 1300
[63.5] Ø2.50 [63.5] 02.50
[28.7] Ø1.13[28.7] 1.00 1.00[25.4] [25.4] 01.13
[9.7] Ø.38 [9.7] 038
.50 [12.7] .50 [12.7]
black black
EPDM EPDM
1301 1301
[63.5] Ø2.50 [63.5] 02.50
[28.7] Ø1.13[28.7] 1.00 1.00[25.4] [25.4] 01.13
[9.7] Ø.38 [9.7] 038
.50 [12.7] .50 [12.7]
white white
EPDM EPDM
1311 1311
[63.5] Ø2.50 [63.5] 02.50
1.00 1.00 [25.4] [25.4]
01.13 [28.7] Ø1.13 [28.7]
Ø.38 [9.7] [9.7] 038
.50 [12.7] .50 [12.7]
black black
SBR SBR
washer molded I no molded in in bumper bumper steelwasher nosteel stops door stops as door appliedas typically I typical y applied
Top Bumper Dome Top Bumper Dome Part Part Number Number
1302 1302
A A
B B
C C
D D
E E
[25.4] Ø1.00 [25.4] 01.00
1.03 1.03 [26.2] [26.2]
[8.0] Ø.31 [8.0] 0.31
[4.8] Ø.19 0.19 [4.8]
.63 [16.0] .63 [16.0]
/ steel molded in in bumper bumper washer molded steel washer stops door stops as door appliedas typicallyapplied I typically special order by special available by styles available andstyles sizesand I other order othersizes
i E 1 1 Request Info
326
@ www.spep.com Download www.spep.com Download 3DmoDELa @
1-800-453-1692 www.aboveboardelectronics.com
Material Color Material Color black black
SBR SBR
Hinges and Industrial Hinges and Industri -' Hardware '' -rdware
Finish Finish
J2007 J2007
right hand right hand
steel steel
zinc plated zinc plated
J2008 J2008
left hand left hand
steel steel
zinc plated zinc plated
right hand e4)right hand part no: J2007 J2007 part no:
4.57 116.0 4.57[116.0] 3.82 97.0 3.82[97.0]
.122[3.10] [3.10]thick thick steel steel I .122
.63 15.9 .63[15.9]
R
44111016, ,,,
left hand hand left part no: J2008 J2008 part no:
.260 6.60 HOLE HOLE 0.260[6.60] (2) PLCS.
Lid Stays Brackets Lid Stays with with Mounting Mounting Brackets Part Number Description Material Material Part Number Description
Finish Finish
J2005 J2005
right hand right hand
steel steel
brass brass plated plated & lacquered & lacquered
J2006 J2006
left hand left hand
steel steel
brass brass plated plated & lacquered & lacquered
Miscellaneous
Lid Stays Stays Lid Part Number Description Material Material Part Number Description
qrc
.059[1.50] [1.50]thick thick steel steel I .059 4.13 104.8
right hand hand right part no: J2005 J2005 part no:
5.44 138.1 .50 12.7
.355 9.02
.159 4.04 HOLE
.059 1.50 .059[1.50] THK.
1.13 28.6 1.13[28.6] .531 13.49 .531[13 49 ]
0
left hand hand left part no: J2006 J2006 part no:
.13 3.4 4] U-13[3-
.159 4.04 HOLE HOLE 0.159[4.04] (2) PLCS.
Table Braces Braces Table Part Number Description Material Material Part Number Description
Finish Finishl l
J2003 J2003
right hand right hand
steel steel
zinc plated zinc plated
J2004 J2004
left hand left hand
steel steel
zinc plated zinc plated 7.09 180.1 7.09[180.1]
right hand right hand part J2003 part no: no: J2003
5.44 138.1 5.44[138.1] .63 15.9 63[15.9]
.188 4.78 HOLE 0.188[4.78] HOLE) .50 12.7 .50[12.7]
left hand left hand part J2004 part no: no: J2004
.090 2.29 ] .090[ THK.
.87 22.1 -H.87[22.1] .18 4.6 i-.18[4.6]
.105 2.67 .105[2.67] THK.
.75 19.1 .75[19.1]
7 LidStays Stays 4/1/i) Lid
Part Number Part Number
I Finish Finish
Description Description
Material Material
TM-81-2R TM-81-2R
right hand right hand
304SS 304SS
barrel barrel polished polished
TM-81-2L TM-81-2L
left hand left hand
304SS 304SS
barrel barrel polished polished
15.0 .59 [15.0]
6.02 153.0
.177 4.50 THRU. THRU. 0.177[4.50] .315 [8.00] [8.00] x82 x 82° C'SINK 0.315 (2) PLCS.
left hand hand left TM-81-2L TM-81-21
1.42 36.0
.079 2.00 .079 [2.00] - -
14.0 .55 [14.0] .55 .059 [1.50] 1.50 L .059 THK.
Request Info
1-800-453-1692 www.aboveboardelectronics.com
right hand right hand TM-81-2R TM-81-2R
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
327
Miscellaneous
qRS 'MCIFIC
"'ERNS AND PRODUCTS
Plain Plain Pattern Pattern Eyebolts Eyebolts Material Material
Rated Rated Capacity Capacity
A A (Thread Size) Size) (Thread
B
C
D
E103 E103
steel steel
500 500 lbs. lbs.
1/4"- 20 1/4"20
1.00 1.00 [25.4] [25.4]
Ø.75 0.75 [19.1] [19.1]
Ø1.19 01.19 [30.2] [30.2]
E103SS El 0355
304SS 304SS
460 lbs. 460 lbs.
1/4"- 20 1/1V20
1.00 1.00 [25.4] [25.4]
Ø.75 0.75 [19.1] [19.1]
Ø1.19 01.19 [30.2] [30.2]
E106 E106
steel steel
900 900 lbs. lbs.
5/16"- 18 5/16"-18
1.12 1.12 [28.5] [28.5]
Ø.87 0.87 [22.1] [22.1]
Ø1.44 01.44 [36.6] [36.6]
E106SS E10655
304SS 304SS
780 780 lbs. lbs.
5/16"- 18 5/16"-18
1.12 1.12 [28.5] [28.5]
Ø.87 0.87 [22.1] [22.1]
Ø1.44 01.44 [36.6] [36.6]
E109 E109
steel steel
1300 1300 lbs. lbs.
3/8"- 16 3/8"-16
1.25 1.25
Ø1.00 01.00 [25.4] [25.4]
Ø1.68 01.68 [42.7] [42.7]
E109SS E10955
304SS 304SS
1160 1160 lbs. lbs.
3/8"- 16 3/8"-16
Ø1.00 01.00 [25.4] [25.4]
Ø1.68 01.68 [42.7] [42.7]
E112 E112
steel steel
1800 1800 lbs. lbs.
7/16"14 7/16"-14
[34.8] [34.8]
Ø1.06 01.06 [26.9] [26.9]
Ø1.81 01.81 [46.0] [46.0]
E115 E115
steel steel
2400 2400 lbs. lbs.
1/2"- 13 13 1/r-
1.50 1.50 [38.1] [38.1]
Ø1.19 01.19 [30.2] [30.2]
Ø2.12 02.12 [53.9] [53.9]
E115SS E11555
304SS 304SS
2150 2150 lbs. lbs.
1/2"- 13 1/2"-13
1.50 1.50 [38.1] [38.1]
Ø1.19 01.19 [30.2] [30.2]
Ø2.12 02.12 [53.9] [53.9]
E118 E118
steel steel
3200 lbs. 3200 lbs.
9/16"12 9/1e- 12
1.75 1.75
Ø1.37 0137 [34.8] [34.8]
Ø2.56 02.56 [65.0] [65.0]
E121 E121
steel steel
4000 lbs. 4000 lbs.
5/8"- 11 5/8"-11
[44.5] [44.5]
Ø1.37 0137 [34.8] [34.8]
Ø2.56 02.56 [65.0] [65.0]
E121SS El 2155
304SS 304SS
3440 lbs. 3440 lbs.
5/8"- 11 5/8"-11
1.75 1.75 [44.5] [44.5]
Ø1.37 0137 [34.8] [34.8]
Ø2.56 02.56 [65.0] [65.0]
E124 E124
steel steel
5000 5000 lbs. lbs.
3/4"- 10 3/4"-10
2.00 2.00 [50.8] [50.8]
Ø1.50 01.50 [38.1] [38.1]
Ø2.81 02.81 [71.4] [71.4]
E124SS E12455
304SS 304SS
5140 5140 lbs. lbs.
3/4"- 10 3/4"-10
2.00 2.00 [50.8] [50.8]
Ø1.50 01.50 [38.1] [38.1]
Ø2.81 02.81 [71.4] [71.4]
E127 E127
steel steel
7000 7000 lbs. lbs.
7/8"7/8"- 9 9
2.25 2.25 [57.15] [57.15]
Ø1.62 01.62 [41.2] [41.2]
Ø3.19 03.19 [81.0] [81.0]
E130SS El 3055
304SS 304SS
9370 9370 lbs. lbs.
1"8 1"-8
2.50 2.50 [63.5] [63.5]
Ø1.75 01.75 [44.5] [44.5]
Ø3.56 03.56 [90.4] [90.4]
E133 E133
steel steel
12000 lbs. 12000 lbs.
1 1/8"1 1/8'L 7 7
2.75 2.75 [69.9] [69.9]
Ø2.00 02.00 [50.8] [50.8]
[101.6] [101.6]
E136 E136
steel steel
15000 lbs. 15000 lbs.
1 1/IV1/4"- 77 1
3.00 3.00 [76.2] [76.2]
Ø2.19 02.19 [55.6] [55.6]
Ø4.44 04.44 [112.8] [112.8]
E139 E139
steel steel
21000 21000 lbs. lbs.
1 1/2"1 1/2"- 6 6
3.50 3.50 [88.9] [88.9]
Ø2.50 02.50 [63.5] [63.5]
[131.8] [131.8]
E142 E142
steel steel
28000 28000 lbs. lbs.
1 3/4"1 3/4"- 5 5
3.75 3.75 [95.3] [95.3]
Ø2.75 02.75 [69.9] [69.9]
Ø6.00 06.00 [152.4] [152.4]
E145 E145
steel steel
38000 38000 lbs. lbs.
2"2"- 5 5
4.00 4.00 [101.6] [101.6]
Ø3.00 03.00 [76.2] [76.2]
Ø6.75 06.75 [171.5] [171.5]
Part Part Number Number
D C
[31.8] [31.8] 1.25 1.25 [31.8] [31.8] 1.37 1.37
[44.5] [44.5]
B
A
0° 0° (VERTICAL) (VERTICAL) RECOMMENDED RECOMMENDED
0° (VERTICAL) (VERTICAL) 0° RECOMMENDED RECOMMENDED ANGULAR LOADS ANGULAR LOADS NOT NOT RECOMMENDED RECOMMENDED
ANGULAR LOADS ANGULAR LOADS NOT NOT RECOMMENDED RECOMMENDED
FRONT VIEW FRONT VIEW
amr
RIGHT SIDE SIDE VIEW RIGHT VIEW
WARNING •
Angular load for Angular load applications applications not not recommended recommended for plain plain eyebolts, eyebolts, see see shoulder shoulder eyebolts eyebolts
stainlesssteel steel parts partsare are304SS 304SS passivated I stainless passivated and and electro-polished electro-polished 316SS parts ►316SS parts available availableupon upon request request steelparts partsare areforged forgedand and304 304//316SS 316SS parts are from from investment I steel parts are investment casting casting all standard standard eyebolts eyebolts threaded threaded national national coarse coarse I all shanks longer longer than than standard standard are are available available upon I shanks upon request request
Request Info
328 328
1-800-453-1692 www.aboveboardelectronics.com
Download Download 31:Immo @@www.spep.com www.spep.com
1.75 1.75
Ø4.00 04.00
Ø5.19 05.19
Hinges and Hardware Hinges and Industrial industrial Hardv --0
Material Material
E203 E203
steel steel
500 500 lbs. lbs.
E203ZN E203ZN
steel steel
500 500 lbs. lbs.
E203SS E203SS
304SS 304SS
460 lbs. 460 lbs.
E203SST E203SST
316SS 316SS
460 lbs. 460 lbs.
E206 E206
steel steel
900 900 lbs. lbs.
E206ZN E206ZN
steel steel
900 900 lbs. lbs.
E206SS E206SS
304SS 304SS
780 780 lbs. lbs.
E206SST E206SST
316SS 316SS
780 780 lbs. lbs.
E209 E209
steel steel
1300 1300 lbs. lbs.
E209ZN E209ZN
steel steel
1300 1300 lbs. lbs.
E209SS E209SS
304SS 304SS
1160 1160 lbs. lbs.
E209SST E209SST
316SS 316SS
1160 1160 lbs. lbs.
E212 E212
steel steel
1800 1800 lbs. lbs.
E212ZN E212ZN
steel steel
1800 1800 lbs. lbs.
E215 E215
steel steel
2400 2400 lbs. lbs.
E215ZN E215ZN
steel steel
2400 2400 lbs. lbs.
E215SS E215SS
304SS 304SS
2150 2150 lbs. lbs.
E215SST E215SST
316SS 316SS
2150 2150 lbs. lbs.
E218 E218
steel steel
3200 lbs. 3200 lbs.
E218ZN E218ZN
steel steel
3200 lbs. 3200 lbs.
E221 E221
steel steel
4000 4000 lbs. lbs.
E221ZN E221ZN
steel steel
4000 4000 lbs. lbs.
E221SS E221SS
304SS 304SS
3440 lbs. 3440 lbs.
E221SST E221SST
316SS 316SS
3440 lbs. 3440 lbs.
E224 E224
steel steel
5000 5000 lbs. lbs.
E224ZN E224ZN
steel steel
5000 5000 lbs. lbs.
E224SS E22455
304SS 304SS
5140 5140 lbs. lbs.
E224SST E224SST
316SS 316SS
5140 5140 lbs. lbs.
E227 E227
steel steel
7000 7000 lbs. lbs.
E227ZN E227ZN
steel steel
7000 7000 lbs. lbs.
E230 E230
steel steel
9000 9000 lbs. lbs.
E230ZN E230ZN
steel steel
9000 9000 lbs. lbs.
E230SS E230SS
304SS 304SS
9370 9370 lbs. lbs.
E230SST E230SST
316SS 316SS
9370 9370 lbs. lbs.
E233 E233
steel steel
E236 E236
steel steel
A A (Thread Size) (Thread Size)
B B
C C
D D
EE
FF
G G
1/4"- 20 1/4"20
1.00 1.00 [25.4] [25.4]
Ø.75 0.75 [19.1] [19.1]
Ø1.19 01.19 [30.2] [30.2]
Ø.53 0.53 [13.5] [13.5]
.15 .15 [3.8] [3.8]
.69 .69 [17.5] [17.5]
5/16"5/16"- 18 18
1.12 1.12 [28.5] [28.5]
Ø.87 0.87 [22.1] [22.1]
Ø1.44 01.44 [36.6] [36.6]
Ø.59 0.59 [15.0] [15.0]
.15 .15 [3.8] [3.8]
.87 .87 [22.1] [22.1]
3/8"- 16 3/8"16
1.25 1.25 [31.8] [31.8]
Ø1.00 01.00 [25.4] [25.4]
Ø1.69 01.69 [42.9] [42.9]
Ø.65 0.65 [16.5] [16.5]
.15 .15 [3.8] [3.8]
1.06 1.06 [26.9] [26.9]
7/16"7/16"- 14 14
1.37 137 [34.8] [34.8]
Ø1.06 01.06 [26.9] [26.9]
Ø1.81 01.81 [46.0] [46.0]
Ø.78 0.78 [19.8] [19.8]
.22 .22 [5.6] [5.6]
1.19 1.19 [30.2] [30.2]
1/2"- 13 1/2"13
1.50 1.50 [38.1] [38.1]
Ø1.19 01.19 [30.2] [30.2]
Ø2.12 02.12 [53.9] [53.9]
Ø.90 0.90 [22.9] [22.9]
.22 .22 [5.6] [5.6]
1.31 1.31 [33.3] [33.3]
3
17 A tD DI
= fD 0 C in
D C
G
9/16"9/16"- 12 12
1.75 1.75 [44.5] [44.5]
Ø1.37 01.37 [34.8] [34.8]
Ø2.56 02.56 [65.0] [65.0]
Ø1.03 01.03 [26.2] [26.2]
.25 .25 [6.4] [6.4]
1.59 1.59 [40.4] [40.4]
F B
5/8"- 11 11 5/8"-
1.75 1.75 [44.5] [44.5]
Ø1.37 01.37 [34.8] [34.8]
Ø2.56 02.56 [65.0] [65.0]
Ø1.03 01.03 [26.2] [26.2]
.25 .25 [6.4] [6.4]
1.59 1.59 [40.4] [40.4]
A E
3/4"- 10 3/4"10
2.00 2.00 [50.8] [50.8]
Ø1.50 01.50 [38.1] [38.1]
Ø2.81 02.81 [71.4] [71.4]
Ø1.19 01.19 [30.2] [30.2]
.25 .25 [6.4] [6.4]
t
t
1.72 1.72 [43.69] [43.69]
0° (VERTICAL) (VERTICAL) 0° RECOMMENDED RECOMMENDED
0° (VERTICAL) (VERTICAL) 0° RECOMMENDED RECOMMENDED
1 45° 1°-- 45° ACCEPTABLE ACCEPTABLE
[57.2] [57.2]
Ø1.62 01.62 [41.2] [41.2]
Ø3.19 03.19 [81.0] [81.0]
Ø1.37 01.37 [34.8] [34.8]
.31 31 [7.9] [7.9]
2.03 2.03 [51.6] [51.6]
1"- 8 1"-8
2.50 2.50 [63.5] [63.5]
Ø1.75 01.75 [44.5] [44.5]
Ø3.56 03.56 [90.4] [90.4]
Ø1.56 01.56 [39.6] [39.6]
.37 37 [7.9] [7.9]
2.22 2.22 [56.4] [56.4]
12000 12000 lbs. lbs.
1 1 1/8"1/8'L 77
2.75 2.75 [69.9] [69.9]
Ø2.00 02.00 [50.8] [50.8]
Ø4.06 04.06 [103.1] [103.1]
Ø1.75 01.75 [44.5] [44.5]
.44 .44 [11.2] [11.2]
2.59 2.59 [65.8] [65.8]
15000 15000 lbs. lbs.
1 1/4"- 77 1 1/1V-
3.00 3.00 [76.2] [76.2]
Ø2.19 02.19 Ø4.44 04.44 Ø1.94 01.94 [55.6] [112.8] [112.8] [493] [49.3] [55.6]
.50 .50 [12.7] [12.7]
2.84 2.84 [72.1] [72.1]
Ø2.50 02.50 [63.5] [63.5]
Ø5.19 05.19 Ø2.19 02.19 [131.8] [55.6] [55.6] [131.8]
.50 .50 [12.7] [12.7]
3.19 3.19 [81.0] [81.0]
7/8"7/8"- 9 9
2.25 2.25
E239 E239
steel steel
21000 21000 lbs. lbs.
1 1 1/2"1/2"- 6 6
3.50 3.50 [88.9] [88.9]
E242 E242
steel steel
28000 28000 lbs. lbs.
1 1 3/4"3/4"- 5 5
3.75 3.75 [95.3] [953]
Ø2.75 02.75 [69.9] [69.9]
Ø6.00 06.00 [152.4] [152.4]
Ø2.50 02.50 [63.5] [63.5]
.62 .62 [15.8] [15.8]
3.75 3.75 [95.3] [95.3]
E245 E245
steel steel
38000 38000 lbs. lbs.
2"- 55 2"-
4.00 4.00 [101.6] [101.6]
Ø3.00 03.00 [76.2] [76.2]
Ø6.75 06.75 Ø2.87 02.87 [171.5] [72.9] [72.9] [171.5]
.75 .75 [19.1] [19.1]
4.25 4.25
stainless steel steel parts partsare are304SS 304SS passivated I stainless passivated and and electro-polished electro-polished 316SS parts I 316SS parts available available upon upon request request steelparts partsare areforged forgedand and304/ 304 /316SS 316SS parts parts are are from from investment casting I steel investment casting all standard standard eyebolts eyebolts threaded threaded national national coarse coarse I all shanks longer longer than than standard standard are are available available upon I shanks upon request request
Request Info
Miscellaneous
Shoulder Pattern Pattern Eyebolts Shoulder Eyebolts Rated Rated Capacity Capacity
Part Part Number Number
1-800-453-1692 www.aboveboardelectronics.com
[108.0] [108.0]
ANGULAR LOADS ANGULAR LOADS NOT NOT RECOMMENDED RECOMMENDED
90 46 - s0° 46°NOT NOT RECOMMENDED RECOMMENDED
FRONT VIEW VIEW FRONT
RIGHT SIDE SIDE VIEW VIEW RIGHT
..11.. 11, 1,.. ~
•
_
WARNING
Rated substantially reduced when Rated capacity capacity is is substantially reduced when loading any angle. angle. Loading Loading must loading at at any must never never be be made an angle angle greater greater than than 45° 45° from from bolt bolt made at at an center line. At of 45°, 45°, rated capacity is is center line. At an an angle angle of rated capacity reduced to 1/4 1/4 of of shown reduced to shown rating. rating.
To Place 800.433.5554 El
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
329 329
Miscellaneous
SIEP"" 'MCIFIC ENGINEERING AND PRODUCTS
Malleable Iron Snaps Malleable Iron Snaps Part Part Number Number A M
M A
M
LL
part part no. no. 161 161
part part no. no. 162, 162, 163 163
M
M
M M
L L
Finish Finish
161 161
.354 .354 [9.00] [9.00]
3.60 3.60 [91.4] [91.4]
nickel nickel
162 162
.375 .375 [25.40] [25.40]
.394 .394 [10.00] [10.00]
4.00 4.00 [101.6] [101.6]
chrome chrome
163 163
.468 .468 [11.89] [11.89]
.470 .470 [11.94] [11.94]
4.81 4.81 [122.2] [122.2]
zinc zinc
200 200
.750 .750 [19.05] [19.05]
.236 .236 [6.00] [6.00]
3.00 3.00 [76.2] [76.2]
nickel nickel
201 201
1.00 1.00 [25.4] [25.4]
.236 .236 [6.00] [6.00]
3.00 3.00 [76.2] [76.2]
nickel nickel
202 202
1.50 1.50 [38.1] [38.1]
.394 .394 [10.00] [10.00]
3.50 3.50 [88.9] [88.9]
nickel nickel
225 225
.625 .625 [15.88] [15.88]
.394 .394 [10.00] [10.00]
3.50 3.50 [88.9] [88.9]
nickel nickel
226 226
.750 .750 [19.05] [19.05]
.394 .394 [10.00] [10.00]
3.50 3.50 [88.9] [88.9]
nickel nickel
227 227
1.00 1.00 [25.4] [25.4]
.394 .394 [10.00] [10.00]
3.75 3.75 [95.3] [95.3]
nickel nickel
230 230
.236 .236 [6.00] [6.00]
.340 .340 [8.64] [8.64]
3.34 3.34 [84.8] [84.8]
zinc zinc
232 232
.359 .359 [9.12] [9.12]
.375 .375 [9.53] [9.53]
[101.6] [101.6]
240 240
.359 .359 [9.12] [9.12]
.532 .532 [13.51] [13.51]
4.50 4.50 [114.3] [114.3]
zinc zinc
245 245
.516 .516 [13.11] [13.11]
.690 .690 [17.53] [17.53]
5.28 5.28 [134.1] [134.1]
zinc zinc
250 250
.433 .433 [11.00] [11.00]
.591 .591 [15.01] [15.01]
6.00 6.00 [152.4] [152.4]
zinc zinc
333 333
1.00 1.00 [25.4] [25.4]
.590 .590 [15.00] [15.00]
5.25 5.25 [133.4] [133.4]
nickel nickel
2311 2311
.719 .719 [18.26] [18.26]
.547 .547 [13.89] [13.89]
3.50 3.50 [88.9] [88.9]
nickel nickel
3141 3141
.750 .750 [19.05] [19.05]
.590 .590 [15.00] [15.00]
3.75 3.75 [95.3] [95.3]
nickel nickel
3142 3142
.875 .875 [22.23] [22.23]
.590 .590 [15.00] [15.00]
4.00 4.00 [101.6] [101.6]
nickel nickel
A A
M M
L L
Finish Finish
228 228
.750 .750 [19.05] [19.05]
.394 .394 [10.01] [10.01]
3.25 3.25 [82.6] [82.6]
nickel nickel
229 229
1.00 1.00 [25.4] [25.4]
.394 .394 [10.01] [10.01]
3.25 3.25 [82.6] [82.6]
nickel nickel
231 231
.290 .290 [7.37] [7.37]
.450 .450 [11.43] [11.43]
3.53 3.53 [89.7] [89.7]
zinc zinc
L
A
L
A A .375 .375 [25.40] [25.40]
part part no. no.200, 200, 201, 201, 202 202
M
A
A
A LL
LL
part part no. no. 225, 225, 226, 226, 227 227
part part no. no.230, 230,232, 232, 240, 240, 245, 245, 250 250
L
A
M
M
part part no. no. 333 333
M A
L
A
L
L part part no. no. 2311 2311
part part no. no. 3141 3141
part part no. no. 3142 3142
4.00 4.00
zinc zinc
Zinc Die Zinc Die Cast Cast Snaps Snaps M
Part Part Number Number
M
A
A
L
LL part part no. no. 228, 228, 229 229
part part no. no. 231 231
Spring Snap Spring Snap Part Part Number Number
L
3158 3158
M
3159SS 315955
Material Material
A A
M M
L L
Finish Finish
steel steel
.465 .465 [11.81] [11.81]
.375 375 [9.53] [9.53]
3.13 3.13 [79.5] [79.5]
zinc zinc
stainless stainless steel steel
1.08 1.08 [27.4] [27.4]
.60 .60 [15.2] [15.2]
3.15 3.15 [80.00] [80.00]
polished polished
A
part 3158 part no. no. 3158
330 330
Download www.spep.com Download 3Dmour Ls @ @ www.spep.com
part part no. no. 3159SS 315955
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Hinges and Hinges and Industrial industrial Hardware Hardware
091X72B���������������������� 212 212 091X72B 212 091X72SS������������������� 212 091X7255
1 1 1001SS������������������������� 276 276 100155 1001SSBK������������������� 276 276 100155BK 1004P01���������������������� 283 283 1004P01 1004P02���������������������� 283 283 1004P02 283 1004P��������������������������� 283 1004P 1005SS������������������������� 276 276 100555 1005SSBK������������������� 276 276 100555BK 1008SS������������������������� 276 276 100855 1009P��������������������������� 282 282 1009P 220 10S2525���������������������� 220 1052525 10SS������������������������������ 104 104 1055 10SS2025�������������������� 221 221 10552025 10SS2525�������������������� 221 221 10552525 10ZN-01���������������������� 104 104 10ZN-01 104 10ZN-03���������������������� 104 10ZN-03 10ZN-04���������������������� 104 104 10ZN-04 10ZN-05���������������������� 104 104 10ZN-05 10ZN-06���������������������� 104 104 10ZN-06 10ZN-07���������������������� 104 104 10ZN-07 104 10ZN���������������������������� 104 10ZN 106 11-00ZN���������������������� 106 11-00ZN 11-02CO���������������������� 106 106 11-02C0 11-04ZN���������������������� 106 106 11-04ZN 106 11-06CO���������������������� 106 11-06C0 11-08ZN���������������������� 106 106 11-08ZN 106 11-09CO���������������������� 106 11-09C0 11-10SS����������������������� 106 106 11-1055 11-10ZN���������������������� 106 106 11-10ZN 106 11-10ZN50����������������� 106 11-10ZN50 11-15CO���������������������� 106 106 11-15C0 106 11-15CO50����������������� 106 11-15C050 11-15SS����������������������� 106 106 11-1555 11-16CO���������������������� 106 106 11-16C0 106 11-16SS����������������������� 106 11-1655 11-20ZN���������������������� 106 106 11-20ZN 107 11-23ZN���������������������� 107 11-23ZN 11-25ZN���������������������� 107 107 11-25ZN 11-30ZN���������������������� 106 106 11-30ZN 106 11-30ZN50����������������� 106 11-30ZN50 11-40SS����������������������� 107 107 11-4055 107 11-40ZN���������������������� 107 11-40ZN 11-40ZN50����������������� 107 107 11-40ZN50 11-45CO���������������������� 107 107 11-45C0 107 11-45CO50����������������� 107 11-45C050 11-45SS����������������������� 107 107 11-4555 11-50CO���������������������� 107 107 11-5000 11-50CO50����������������� 107 107 11-500050 11-55ZN���������������������� 107 107 11-55ZN 11-55ZN50����������������� 107 107 11-55ZN50 11-70SS����������������������� 107 107 11-7055 11-90SS����������������������� 107 107 11-9055 11-90ZN���������������������� 107 107 11-90ZN 11-90ZN50����������������� 107 107 11-90ZN50 11-95CO���������������������� 107 107 11-95C0 11-95CO50����������������� 107 107 11-95C050 11-97ZN���������������������� 107 107 11-97ZN 1120-01��������������������������89 1120-01 89 1120SS-01���������������������89 112055-01 89 1121-01-B01�����������������89 1121-01-B01 89 1121-01-B02�����������������89 1121-01-B02 89 1121-01-B03�����������������89 1121-01-B03 89 1121-01-B04�����������������89 1121-01-B04 89 1121-01-B05�����������������89 1121-01-B05 89 1121NL-01��������������������89 1121NL-01 89 1122-01��������������������������89 1122-01 89 1123-01��������������������������89 1123-01 89 1124-01��������������������������89 1124-01 89 1125-01��������������������������89 1125-01 89 1127���������������������������������66 1127 66
160 120X72SS������������������� 212 212 1128LH������������������������ 1128LH 160 120X7255 1130-L�������������������������� 108 122SS-K1�����������������������72 1130-L 72 108 12255-K1 1130-S�������������������������� 108 122SS-K2�����������������������72 108 12255-1(2 72 1130-5 323 12255 1131K��������������������������� 122SS������������������������������72 1131K 323 72 1131LH������������������������ 323 12255P-K1 122SSP-K1���������������������72 1131LH 323 72 1131RH������������������������ 323 12255P-K2 122SSP-K2���������������������72 1131RH 323 72 1131S��������������������������� 323 12255P 122SSP���������������������������72 11315 323 72 1132LH������������������������ 323 12355-K1 123SS-K1�����������������������72 1132LH 72 323 323 12355-K2 1132RH������������������������ 123SS-K2�����������������������72 1132RH 72 323 1133������������������������������ 161 123SS������������������������������72 72 1133 161 12355 1134P������������������������������66 123SSP-K1���������������������72 1134P 72 66 12355P-K1 1135������������������������������ 323 12355P-K2 123SSP-K2���������������������72 1135 323 72 1135K��������������������������� 323 12355P 123SSP���������������������������72 1135K 72 323 323 1260ZN 163 1135S��������������������������� 1260ZN������������������������ 163 11355 323 1136������������������������������ 323 12 12��������������������������������������85 1136 323 85 1137-01��������������������������64 12A2025���������������������� 221 221 1137-01 64 12A2025 1137-02��������������������������64 12A2030���������������������� 221 221 1137-02 64 12A2030 1137-03��������������������������64 12A252502����������������� 221 221 1137-03 64 12A252502 221 1137-04��������������������������64 12A2525���������������������� 221 1137-04 64 12A2525 1137-05��������������������������64 12A2530���������������������� 221 221 1137-05 64 12A2530 1142ZN������������������������ 162 12A3030���������������������� 221 221 1142ZN 162 12A3030 1153-01��������������������������33 12A3040���������������������� 221 221 33 12A3040 1153-01 1153-02��������������������������33 12A3540���������������������� 221 221 1153-02 33 12A3540 221 1153���������������������������������33 12A4040���������������������� 221 1153 33 12A4040 1157-01��������������������������33 12BK��������������������������������85 1157-01 33 12BK 85 1159-03����������������������� 165 12C100���������������������������81 1159-03 165 12C100 81 1159������������������������������ 165 12C101���������������������������81 81 1159 165 12C101 322 12C102 1170-01����������������������� 12C102���������������������������81 1170-01 322 81 1170������������������������������ 322 12C103 12C103���������������������������81 1170 322 81 322 12C104 1171-01����������������������� 12C104���������������������������81 1171-01 322 81 1171������������������������������ 322 12C105 12C105���������������������������81 1171 322 81 1172������������������������������ 322 12C106 12C106���������������������������81 1172 322 81 322 12C107 1173������������������������������ 12C107���������������������������81 1173 322 81 1175������������������������������ 109 12C108���������������������������81 1175 81 109 12C108 109 1175SS������������������������� 12C10������������������������������95 109 12C10 95 117555 1176������������������������������ 109 12C109���������������������������81 1176 81 109 12C109 1177������������������������������ 109 12C10SS�������������������������95 1177 95 109 12C1055 165 1178SS-LH01������������ 12C110���������������������������81 117855-LHO1 165 12C110 81 1178SS-RH01������������ 165 12C111���������������������������81 117855-RHO1 81 165 12C111 1180���������������������������������70 12C112���������������������������81 70 12C112 81 1180 1181A-01 12C113���������������������������81 1181A-01 ������������������� 163 81 163 12C113 1181A-02�������������������� 164 12C114���������������������������81 1181A-02 164 12C114 81 164 1181A-03�������������������� 12C115���������������������������81 1181A-03 164 12C115 81 1181A-11LH�������������� 164 12C116���������������������������81 1181A-11LH 164 12C116 81 164 1181A-11RH�������������� 12C117���������������������������81 1181A-11RH 164 12C117 81 1181A��������������������������� 163 12C118���������������������������81 1181A 163 12C118 81 1182SS-01������������������ 162 12C11������������������������������95 118255-01 162 12C11 95 162 1182SS������������������������� 12C119���������������������������81 162 12C119 118255 81 1182ZN������������������������ 162 12C11SS�������������������������95 1182ZN 162 12C1155 95 162 1183SS������������������������� 12C12������������������������������95 162 12C12 118355 95 1183ZN������������������������ 162 12C12SS�������������������������95 1183ZN 162 12C1255 95 1184ZN������������������������ 163 12C13������������������������������95 1184ZN 163 12C13 95 1185SS-LH01������������ 164 12C13SS�������������������������95 164 12C1355 118555-LHO1 95 1185SS-LH����������������� 164 12C15������������������������������95 164 12C15 95 118555-LH 1185SS-RH01������������ 164 12C15SS�������������������������95 164 12C1555 118555-RHO1 95 1185SS-RH����������������� 164 12C16������������������������������95 164 12C16 118555-RH 95 1186-D01�����������������������73 12C16SS�������������������������95 73 12C1655 95 1186-D01 1186-D����������������������������73 12C17������������������������������95 73 12C17 1186-D 95 1186-G����������������������������73 12C17SS�������������������������95 73 12C1755 95 1186-G 1187-01����������������������� 165 12C18������������������������������95 1187-01 165 12C18 95 1187������������������������������ 165 12C18SS�������������������������95 1187 165 12C1855 95 1188������������������������������ 165 12C1��������������������������������95 1188 165 12C1 95 1189������������������������������ 165 12C19������������������������������95 165 12C19 1189 95 1190���������������������������������68 12C19SS�������������������������95 95 1190 68 12C1955 119101ZN����������������������67 12C1SS���������������������������95 119101ZN 67 12C155 95 119102ZN����������������������67 12C20������������������������������95 119102ZN 67 12C20 95 1192���������������������������������68 12C20SS�������������������������95 1192 95 68 12C2055 1193���������������������������������69 12C22������������������������������95 69 12C22 95 1193 1194-01��������������������������68 12C22SS�������������������������95 1194-01 95 68 12C2255 1194���������������������������������68 12C23������������������������������95 1194 95 68 12C23 1195ZN���������������������������67 12C23SS�������������������������95 1195ZN 67 12C2355 95 1196���������������������������������68 12C24������������������������������95 68 12C24 95 1196 1197���������������������������������68 12C24SS�������������������������95 1197 68 12C2455 95 1198���������������������������������68 12C25������������������������������95 1198 68 12C25 95 120X72B���������������������� 212 12C2555 12C25SS�������������������������95 120X72B 212 95
12C26������������������������������95 12S6060���������������������� 220 220 14BK-50 14BK-50��������������������������85 12C26 95 1256060 85 12C26SS�������������������������95 221 1500-01 1500-01����������������������� 170 170 95 12SS2030�������������������� 12552030 221 12C2655 12C27������������������������������95 12SS2526�������������������� 220 220 1500-111B 1500-111B������������������ 166 166 12C27 95 12552526 221 1500-111P 166 12C27SS�������������������������95 12SS2530�������������������� 221 1500-111P������������������ 166 12C2755 95 12552530 12C28������������������������������95 12SS2829�������������������� 220 220 1500-211B 1500-211B������������������ 166 166 12C28 95 12552829 12C28SS�������������������������95 12SS3030�������������������� 221 221 1500-211P 1500-211P������������������ 166 166 12C2855 95 12553030 12C2��������������������������������95 12SS30401BK������������ 230 230 1500A-01 1500A-01�������������������� 166 166 12C2 95 125530401BK 12C29������������������������������95 221 1500A 1500A��������������������������� 166 166 12C29 95 12SS3040 12553040 ������������������� 221 220 1500B-01 166 12C29SS�������������������������95 1500B-01�������������������� 166 12C2955 95 12SS3435�������������������� 12553435 220 12C2SS���������������������������95 12SS3535 ������������������� 221 221 1500B 1500B��������������������������� 166 166 12C255 95 12553535 12C30������������������������������95 12SS3540 ������������������� 221 221 1500C 1500C��������������������������� 166 166 12C30 95 12553540 12C30SS�������������������������95 221 1500D 1500D�������������������������� 166 166 12C3055 95 12SS40402 125540402 ���������������� 221 12C31������������������������������95 12SS4040�������������������� 221 221 1500G-01 1500G-01�����������167, 169 12C31 95 12554040 167,169 221 1500G55 169 12C31SS�������������������������95 12SS6040�������������������� 221 1500GSS������������167, 12C3155 95 12556040 167,169 12C32������������������������������95 12SS���������������������������������85 1500E��������������������������� 166 166 95 1255 12C32 85 1500E 12C32SS�������������������������95 12SST-50������������������������85 1500F��������������������������� 166 166 12C3255 95 1255T-50 85 1500F 12C33������������������������������95 12SST2030����������������� 221 221 1500G 1500G�������������������������� 166 166 12C33 95 125512030 12C33SS�������������������������95 12SST3030����������������� 221 221 1500H 1500H�������������������������� 166 166 12C3355 95 125513030 221 15001 166 12C34������������������������������95 12SST3040����������������� 221 1500I���������������������������� 166 12C34 95 125513040 12C34SS�������������������������95 12SST4040����������������� 221 221 15001P 1500IP�������������������������� 167 167 12C3455 95 125514040 12C35������������������������������95 12SST������������������������������85 15����������������������������������� 104 104 12C35 85 15 95 1255T 12C35SS�������������������������95 105 15SS3939 ������������������ 220 220 12ZN-01 12C3555 95 12ZN-01���������������������� 105 15553939 12C36������������������������������95 12ZN-02���������������������� 105 16-1505��������������������������80 12C36 95 12ZN-02 105 16-1505 80 12C36SS�������������������������95 12ZN���������������������������� 105 16-1506��������������������������80 12C3655 95 12ZN 105 16-1506 80 12C37������������������������������95 326 16-2005 16-2005��������������������������80 12C37 95 1300������������������������������ 1300 326 80 12C37SS�������������������������95 1301������������������������������ 326 326 16-2006 16-2006��������������������������80 12C3755 95 1301 80 12C3��������������������������������95 326 16-25 16-25�������������������������������80 1302 12C3 95 1302������������������������������ 326 80 326 16-3005 12C3SS���������������������������95 1303������������������������������ 326 16-3005��������������������������80 12C355 95 1303 80 12C40��������������������������� 100 100 1304 1304������������������������������ 326 326 16-3006 16-3006��������������������������80 12C40 80 100 326 16-50 12C41��������������������������� 100 1305������������������������������ 16-50�������������������������������80 12C41 1305 326 80 12C42��������������������������� 100 100 1306 1306������������������������������ 326 326 1600G5501 1600GSS01�������167, 169 12C42 167,169 12C43��������������������������� 100 100 1307 1307������������������������������ 326 326 1600G55 1600GSS������������167, 169 12C43 167,169 100 1308 326 1600E 168 12C44��������������������������� 100 1308������������������������������ 326 1600E��������������������������� 168 12C44 12C45��������������������������� 100 100 1309 1309������������������������������ 326 326 1600F 1600F��������������������������� 168 168 12C45 100 1310 326 1600G 168 12C46��������������������������� 100 1310������������������������������ 326 1600G�������������������������� 168 12C46 12C47��������������������������� 100 100 1311 1311������������������������������ 326 326 161 161�������������������������������� 330 330 12C47 12C48��������������������������� 100 100 1353435 13S3435���������������������� 220 220 162 162�������������������������������� 330 330 12C48 220 163-K 159 12C4��������������������������������95 13S3939���������������������� 220 163-K���������������������������� 159 12C4 95 1353939 12C4SS���������������������������95 220 163-L 163-L���������������������������� 159 159 220 12C455 95 13S4040���������������������� 1354040 330 12C52������������������������������94 13ZN-01���������������������� 105 163�������������������������������� 330 12C52 94 13ZN-01 105 163 12C53������������������������������94 105 164HZ�������������������������� 159 159 94 13ZN-02���������������������� 13ZN-02 12C53 105 164HZ 12C54������������������������������94 13ZN���������������������������� 105 165HZ�������������������������� 159 159 12C54 94 13ZN 105 165HZ 159 12C55������������������������������94 14-01�������������������������������85 167HZ�������������������������� 159 94 14-01 85 167HZ 12C55 12C56������������������������������94 14-50�������������������������������85 168SS-K����������������������� 160 160 12C56 94 14-50 85 16855-K 160 12C57������������������������������94 1400-112B������������������ 168 168SS-L����������������������� 160 12C57 94 1400-112B 168 16855-L 12C58������������������������������94 1400-112P������������������ 168 169HZ�������������������������� 159 159 94 1400-112P 168 169HZ 12C58 12C5��������������������������������95 1400-142B������������������ 168 16SS-01����������������������� 194 194 12C5 95 1400-142B 168 1655-01 194 12C59������������������������������94 1400-142P������������������ 168 16SS������������������������������ 194 94 1400-142P 12C59 168 1655 12C5SS���������������������������95 1400-212B������������������ 168 16ZN���������������������������� 194 194 12C555 95 1400-212B 168 16ZN 104 12C60������������������������������94 1400-212P������������������ 168 17����������������������������������� 104 94 1400-212P 12C60 168 17 12C61������������������������������94 1400-242B������������������ 168 171HN01������������������������67 94 1400-242B 168 171HNO1 12C61 67 12C6��������������������������������95 1400-242P������������������ 168 171ZN01������������������������67 12C6 95 1400-242P 168 171ZNO1 67 12C6SS���������������������������95 1400A-01�������������������� 169 173�������������������������������� 108 108 12C655 95 1400A-01 169 173 12C7��������������������������������95 1400A��������������������������� 168 173CH-LK������������������� 108 108 12C7 168 173CH-LK 95 1400A 12C7SS���������������������������95 1400C��������������������������� 169 173CH�������������������������� 108 108 169 173CH 12C755 95 1400C 12C8SS���������������������������95 1420-02����������������������� 170 173LK-751������������������ 108 108 170 173LK-751 12C855 95 1420-02 12C8��������������������������������95 1420-03����������������������� 170 173LK��������������������������� 108 108 12C8 95 1420-03 170 173LK 12C9-01��������������������������95 1430-01����������������������� 170 173SST-CH751��������� 108 108 170 173551-CH751 95 1430-01 12C9-01 12C9��������������������������������95 1430-02����������������������� 170 173SST������������������������� 108 108 12C9 170 17355T 95 1430-02 12PBK�����������������������������85 170 174�����������������������������������70 12PBK. 170 174 85 1430-04����������������������� 1430-04 70 12S2025���������������������� 220 220 1440 1440������������������������������ 219 219 176-01 176-01�����������������������������71 71 1252025 12S2525���������������������� 220 220 1441������������������������������ 219 176-02 176-02�����������������������������71 1441 219 71 1252525 12S2526���������������������� 220 220 1445 1445������������������������������ 161 176�����������������������������������71 161 176 71 1252526 12S253003����������������� 220 220 145055-02 1450SS-02������������������ 191 177P-04����������������������� 197 197 125253003 191 177P-04 12S2530���������������������� 220 220 145055 1450SS������������������������� 191 177P����������������������������� 197 197 191 177P 1252530 12S2535���������������������� 220 220 1450ZN 1450ZN������������������������ 191 179P-04����������������������� 197 197 1252535 191 179P-04 12S2829���������������������� 220 220 145155 1451SS������������������������� 191 179P-10����������������������� 197 197 1252829 191 179P-10 12S303001����������������� 220 220 1460ZN 1460ZN������������������������ 196 179P����������������������������� 197 197 125303001 196 179P 12S3030���������������������� 220 220 1462ZN 1462ZN������������������������ 196 17S4849 �������������������� 220 220 1253030 196 1754849 12S3035���������������������� 220 220 14��������������������������������������85 18-01�������������������������������86 1253035 14 85 18-01 86 12S3040���������������������� 220 220 14905501 1490SS01�������������������� 191 18-50�������������������������������86 1253040 191 18-50 86 12S3535���������������������� 220 220 149055 1490SS������������������������� 189 180�������������������������������� 192 192 1253535 189 180 12S3540���������������������� 220 220 1490ZN 1490ZN������������������������ 191 180A����������������������������� 192 192 191 180A 1253540 12S40401�������������������� 220 220 1497ZN 1497ZN������������������������ 192 180SS-01��������������������� 192 192 12540401 192 18055-01 12S4040���������������������� 220 220 14BK-01 14BK-01��������������������������85 180SS��������������������������� 192 192 1254040 85 18055
Index
0 0
To Place
[email protected] To PlaceOrder: Order ta 800.433.5554 800.433.5554 OM
[email protected]
331 331
F m x
SIERRA PACIFIC ENGINEERING AND PRODUCTS
Index
x ai c
18101SS-01���������������� 192 192 1854060 18S4060���������������������� 220 20613SS-L������������������ 132 132 209805 209805������������������������� 151 215-140SS������������������ 137 137 2021SS������������������������� 216 220 202155 151 215-14055 1810155-01 216 2061355-L 18101SS���������������������� 192 192 18S5050 2022CH����������������������� 160 160 20613ZN-L 20613ZN-L����������������� 132 132 2098 2098������������������������������ 151 215-140ZN����������������� 137 137 220 2022CH 151 215-140ZN 1810155 1855050 ��������������������� 220 181�������������������������������� 192 192 18S5060 202�������������������������������� 330 2061SS-L��������������������� 132 132 2098SS������������������������� 151 215-150ZN����������������� 136 136 181 220 202 151 215-150ZN 1855060 ��������������������� 220 330 206155-L 209855 192 1855080 132 2099 138 181A����������������������������� 192 18S5080���������������������� 220 20��������������������������������������24 2061ZN-L�������������������� 132 2099������������������������������ 151 215-205BK������������������ 138 181A 220 20 24 2061ZN-L 151 215-205BK 181 X XX XX X�������������������� 218 218 1856060 18S6060 �������������������� 220 202ZN1������������������������ 129 129 206255 2062SS������������������������� 128 128 209BP 209BP��������������������������� 150 215-205SS������������������ 138 138 181 220 202ZN1 150 215-20555 182�������������������������������� 194 194 1856080 18S6080���������������������� 220 2032SS-K01��������������� 127 127 206355 2063SS������������������������� 128 128 209BP55 209BPSS���������������������� 150 215-205ZN����������������� 138 138 182 150 215-205ZN 220 203255-K01 182SS01���������������������� 194 194 185514040 18SST4040 ���������������� 221 2032SS-K�������������������� 127 127 206455 2064SS������������������������� 123 123 20BK 20BK��������������������������������24 215-210BK������������������ 138 138 221 203255-K 24 215-210BK 1825501 182SS��������������������������� 194 194 191 X X�������������������� 218 2032SS-L03���������������� 127 127 206555 2065SS������������������������� 142 142 21 21��������������������������������������24 215-210SS������������������ 138 138 191 XXXX 24 215-21055 18255 218 203255-L03 218 192 127 2066ZN 147 210-10055 138 182 XXXX X X�������������������� 218 192 XXX X X X�������������������� 218 2032SS-L��������������������� 127 2066ZN������������������������ 147 210-100SS������������������ 146 215-210ZN����������������� 138 182 146 215-210ZN 218 203255-L 18301SS-01���������������� 192 192 1932HSS01���������������� 219 2032SS������������������������� 127 127 206755 2067SS������������������������� 124 124 210-100SSBK������������� 146 215-215SS������������������ 138 138 219 146 1830155-01 1932H5501 203255 210-10055BK 215-21555 18301SS���������������������� 192 192 1932HZ01 1932HZ01������������������� 219 2033SS-L01���������������� 126 126 206855-01 2068SS-01������������������ 147 147 210-100ZN 210-100ZN����������������� 146 215-220BK������������������ 138 138 146 215-220BK 1830155 219 203355-L01 183�������������������������������� 192 192 193 X X�������������������� 218 2033SS-L��������������������� 126 126 206855-02 2068SS-02������������������ 147 147 210-11055 210-110SS������������������ 146 215-220ZN����������������� 138 138 193 XXXX 146 215-220ZN 183 218 203355-L 1832HSS01���������������� 219 219 1941HZ������������������������ 218 2034SS-L��������������������� 126 126 206955 2069SS������������������������� 125 125 210-110ZN����������������� 146 215-225BK������������������ 138 138 1941HZ 210-110ZN 146 215-225BK 1832H5501 218 203455-L 219 1941HZ55 126 20651 129 210-12055 138 1832HZ01������������������� 219 1941HZSS������������������� 219 2035SS-L��������������������� 126 206S1��������������������������� 129 210-120SS������������������ 146 215-225ZN����������������� 138 1832HZ01 146 215-225ZN 219 203555-L 183A����������������������������� 192 192 194 194 XXX X X X�������������������� 218 2036SS-L03���������������� 126 126 20652 206S2��������������������������� 129 129 210-120ZN 210-120ZN����������������� 146 215-230BK������������������ 138 138 146 215-230BK 183A 218 203655-L03 183 XXXX X X�������������������� 218 218 195 195 XXX X X X�������������������� 218 2036SS-L��������������������� 126 126 206551 206SS1������������������������� 129 129 210-20055 210-200SS������������������ 146 215-230ZN����������������� 138 138 183 146 215-230ZN 218 203655-L 184�������������������������������� 194 194 1961NN 1961NN����������������������� 218 2037SS-L��������������������� 126 126 206ZN1 206ZN1������������������������ 129 129 210-20055BK 210-200SSBK������������� 146 215-250ZN����������������� 136 136 184 146 215-250ZN 218 203755-L 1841HZ������������������������ 218 218 196 196 XXX X X X�������������������� 218 2038SS-L��������������������� 126 126 207055 2070SS������������������������� 124 124 210-200ZN 210-200ZN����������������� 146 215-305BK������������������ 138 138 1841HZ 218 203855-L 146 215-305BK 219 1971HN 130 207155 124 210-21055 138 1841HZSS������������������� 219 1971HN����������������������� 218 2043SS-02������������������ 130 2071SS������������������������� 124 210-210SS������������������ 146 215-305SS������������������ 138 1841HZ55 218 204355-02 146 215-30555 184A����������������������������� 194 194 1971HZ 1971HZ������������������������ 218 2043SS������������������������� 130 130 2072NP 2072NP������������������������ 128 128 210-210ZN 210-210ZN����������������� 146 215-305ZN����������������� 138 138 184A 146 215-305ZN 218 204355 184SS01���������������������� 194 194 1971NN 1971NN����������������������� 218 2043ZN-02����������������� 130 130 2073ZN 2073ZN������������������������ 133 133 210-22055 210-220SS������������������ 146 215-310BK������������������ 138 138 218 2043ZN-02 146 215-310BK 1845501 184SS��������������������������� 194 194 1971NZ 1971NZ������������������������ 218 2043ZN������������������������ 130 130 2074N 2074N�������������������������� 124 124 210-220ZN 210-220ZN����������������� 146 215-310SS05������������� 141 141 218 2043ZN 18455 146 215-3105505 184 XXXX X X�������������������� 218 218 1972HZ������������������������ 218 2044SS-01������������������ 130 130 2075ZN-L 2075ZN-L�������������������� 145 145 210-K0155 210-K01SS������������������ 146 215-310SS������������������ 138 138 184 1972HZ 218 204455-01 146 215-31055 193 1972NN 130 2075ZN-5 145 210-K0155BK 138 18501��������������������������� 193 1972NN����������������������� 218 2044SS-02������������������ 130 2075ZN-S������������������� 145 210-K01SSBK������������ 146 215-310ZN����������������� 138 146 215-310ZN 18501 218 204455-02 18501A������������������������ 193 193 197 X X�������������������� 218 2044SS������������������������� 130 130 207BK1 207BK1������������������������ 129 129 210-K01ZN 210-K01ZN����������������� 146 215-315SS������������������ 138 138 197 XXXX 18501A 218 204455 146 215-31555 18501SS���������������������� 193 193 1981HZ 1981HZ������������������������ 218 2044ZN-01����������������� 130 130 20751 207S1��������������������������� 129 129 210-K0255 210-K02SS������������������ 146 215-320BK������������������ 138 138 218 2044ZN-01 146 215-320BK 1850155 18502SS���������������������� 193 193 1981NN 1981NN����������������������� 218 2044ZN-02����������������� 130 130 20752 207S2��������������������������� 129 129 210-K0255BK 210-K02SSBK������������ 146 215-320ZN����������������� 138 138 218 2044ZN-02 146 215-320ZN 1850255 193 1982HZ 130 207551 129 210-K02ZN 138 185�������������������������������� 193 1982HZ������������������������ 218 2044ZN������������������������ 130 207SS1������������������������� 129 210-K02ZN����������������� 146 215-325BK������������������ 138 218 2044ZN 146 215-325BK 185 185A����������������������������� 193 193 1982NN 1982NN����������������������� 218 2045������������������������������ 131 131 207ZN1 207ZN1������������������������ 129 129 2102 2102���������������������������������24 215-325ZN����������������� 138 138 218 2045 24 215-325ZN 185A 193 1982NZ 130 207ZN2 129 2103CH 138 185SS01���������������������� 193 1982NZ������������������������ 218 2046SS������������������������� 130 207ZN2������������������������ 129 2103CH��������������������������24 215-330BK������������������ 138 1855501 218 204655 24 215-330BK 185SS��������������������������� 193 193 19 19��������������������������������������86 2046ZN������������������������ 130 130 2085 2085������������������������������ 152 152 2131 2131������������������������������ 134 215-330ZN����������������� 138 138 134 215-330ZN 18555 86 2046ZN 185 X XX XX X�������������������� 218 218 198 198 XXX X X X�������������������� 218 2047SS������������������������� 130 130 208555 2085SS������������������������� 152 152 213 213�������������������������������� 134 215-340BK������������������ 137 137 185 218 204755 134 215-340BK 193 130 2086 152 2133ZN-L 137 18601��������������������������� 193 19S5959 2047ZN������������������������ 130 2086������������������������������ 152 2133ZN-L�������������������� 133 215-340SS������������������ 137 220 2047ZN 18601 1955959 �������������������� 220 133 215-34055 18601SS���������������������� 193 193 2048SS������������������������� 130 130 2086BK 2086BK������������������������ 152 152 2134ZN 2134ZN������������������������ 133 215-340ZN����������������� 137 137 133 215-340ZN 1860155 204855 193 130 208655 152 2135ZN 136 186�������������������������������� 193 2048ZN������������������������ 130 2086SS������������������������� 152 2135ZN������������������������ 149 215-350ZN����������������� 136 2048ZN 149 215-350ZN 186 2 2 1861NN����������������������� 218 218 2049SS������������������������� 131 131 2088 2088������������������������������ 152 152 2136ZN 2136ZN������������������������ 133 215-K01BK����������������� 139 139 1861NN 133 215-K01BK 204955 2-11BK01 186SS��������������������������� 193 193 2-11BK01�����������������������65 2049ZN������������������������ 131 131 2088BK 2088BK������������������������ 152 152 2137ZN 2137ZN������������������������ 149 215-K01SS������������������ 139 139 65 2049ZN 149 215-K0155 18655 2-11BK02�����������������������65 218 2-11BK02 131 208902 152 2138ZN 139 186 XXXX X X�������������������� 218 204SS-K����������������������� 131 208902������������������������� 152 2138ZN������������������������ 149 215-K01ZN����������������� 139 186 65 20455-K 149 215-K01ZN 2-11BK����������������������������65 18701SS���������������������� 193 193 2-116K 204ZN-K���������������������� 131 131 208903 208903������������������������� 152 152 2139ZN-L 2139ZN-L�������������������� 128 215-K02BK����������������� 139 139 65 204ZN-K 128 215-K02BK 1870155 2-13BK01�����������������������65 193 2-13BK01 131 208905 152 2139ZN-5 139 18701SST�������������������� 193 2051������������������������������ 131 208905������������������������� 152 2139ZN-S������������������� 128 215-K02SS������������������ 139 65 2051 128 215-K0255 18701551 2-13BK02 65 187�������������������������������� 193 193 2-13BK02�����������������������65 2052ZN������������������������ 131 131 208907 208907������������������������� 150 150 214-01 214-01�������������������������� 134 215-K02ZN����������������� 139 139 187 2052ZN 134 215-K02ZN 2-13BK����������������������������65 65 1871HN����������������������� 218 218 2-13BK 2053SS������������������������� 123 123 2089 2089������������������������������ 152 152 214-02 214-02�������������������������� 134 215-K03BK����������������� 139 139 1871HN 134 215-K03BK 205355 2-14BK01�����������������������65 218 2-14BK01 123 2089BK01 152 214 139 1871HZ������������������������ 218 2053ZN������������������������ 123 2089BK01������������������� 152 214�������������������������������� 134 215-K03SS������������������ 139 1871HZ 65 2053ZN 134 215-K0355 2-14BK02 65 1871NN����������������������� 218 218 2-14BK02�����������������������65 2054SS������������������������� 123 123 20851 208S1��������������������������� 129 129 214155-K 2141SS-K�������������������� 134 215-K03ZN����������������� 139 139 1871NN 134 215-K03ZN 205455 2-14BK����������������������������65 218 2-14BK 123 20852 129 214155-L 139 1871NZ������������������������ 218 2054ZN������������������������ 123 208S2��������������������������� 129 2141SS-L��������������������� 134 215-K04BK����������������� 139 1871NZ 65 2054ZN 134 215-K04BK 2-15CH���������������������������64 64 1872HZ������������������������ 218 218 2-15CH 2055SS������������������������� 123 123 208ZN1 208ZN1������������������������ 129 129 2141ZN-K 2141ZN-K������������������� 134 215-K04SS������������������ 139 139 1872HZ 134 215-K0455 205555 2-16CH���������������������������64 64 1872NN����������������������� 218 218 2-16CH 2055ZN������������������������ 123 123 209102 209102������������������������� 153 153 2141ZN-L 2141ZN-L�������������������� 134 215-K04ZN����������������� 139 139 1872NN 134 215-K04ZN 2055ZN 200170����������������������������23 212 200170 129 20910255 153 214255-K 139 187X72B���������������������� 212 205BK1������������������������ 129 209102SS�������������������� 153 2142SS-K�������������������� 135 215-K08BK����������������� 139 187X726 23 205BK1 135 215-K08BK 200172����������������������������23 23 187X72SS������������������� 212 212 200172 205S1��������������������������� 129 129 209103 209103������������������������� 153 153 214255-L 2142SS-L��������������������� 135 215-K08SS������������������ 139 139 187X7255 20551 135 215-K0855 2001900�������������������������23 218 2001900 129 20910355 153 2142ZN-K 139 187 XXXX X X�������������������� 218 205S2��������������������������� 129 209103SS�������������������� 153 2142ZN-K������������������� 135 215-K08ZN����������������� 139 187 135 215-K08ZN 23 20552 2001902 23 18801��������������������������� 193 193 2001902�������������������������23 205SS1������������������������� 129 129 209107 209107������������������������� 155 155 2142ZN-L 2142ZN-L�������������������� 135 215-K10SS������������������ 140 140 18801 205551 135 215-K1055 2001930�������������������������23 18801A������������������������ 193 193 2001930 205ZN1������������������������ 129 129 20910755 209107SS�������������������� 155 155 2144ZN-L 2144ZN-L�������������������� 135 215-K10ZN����������������� 140 140 23 205ZN1 135 215-K10ZN 18801A 2001932�������������������������23 18801SS���������������������� 193 193 2001932 20601SS-K������������������ 132 132 2091LK 2091LK������������������������ 154 154 214655-L 2146SS-L��������������������� 135 215-K13SS������������������ 140 140 1880155 23 2060155-K 135 215-K1355 2001940�������������������������23 18802��������������������������� 193 193 2001940 20601SS-L������������������ 132 132 2091LK55-L 2091LKSS-L���������������� 154 154 2146ZN-L 2146ZN-L�������������������� 135 215-K13ZN����������������� 140 140 135 215-K13ZN 18802 23 2060155-L 2001942�������������������������23 18802SS���������������������� 193 193 2001942 20601ZN-K����������������� 132 132 2091LK5501 2091LKSS01��������������� 154 154 214855-L 2148SS-L��������������������� 135 215-K14SS������������������ 140 140 23 20601ZN-K 135 215-K1455 1880255 2001950�������������������������23 18803��������������������������� 193 193 2001950 20601ZN-L����������������� 132 132 209302 209302������������������������� 154 154 2148ZN-L 2148ZN-L�������������������� 135 215-K14ZN����������������� 140 140 23 20601ZN-L 135 215-K14ZN 18803 2001952�������������������������23 18803A������������������������ 193 193 2001952 20602SS-K������������������ 132 132 209303 209303������������������������� 154 154 215-01055 215-010SS������������������ 140 215-K18SS������������������ 140 140 140 215-K1855 18803A 23 2060255-K 2001960�������������������������23 18803SS���������������������� 193 193 2001960 20602SS-L������������������ 132 132 209303BK 209303BK������������������� 154 154 215-010ZN 215-010ZN����������������� 140 215-K18ZN����������������� 140 140 140 215-K18ZN 1880355 23 2060255-L 2001962�������������������������23 18804SS���������������������� 193 193 2001962 20602ZN-K����������������� 132 132 20930355 209303SS�������������������� 154 154 215-01555 215-015SS������������������ 139 215-K21BK����������������� 137 137 23 20602ZN-K 139 215-K21BK 1880455 2001990�������������������������23 188�������������������������������� 193 193 2001990 20602ZN-L����������������� 132 132 209304 209304������������������������� 154 154 215-015ZN 215-015ZN����������������� 139 215-K21SS������������������ 137 137 23 20602ZN-L 139 215-K2155 188 2001992�������������������������23 1881HZ������������������������ 218 218 2001992 20603SS-K������������������ 132 132 2093 2093������������������������������ 154 154 215-105BK 215-105BK������������������ 138 215-K21ZN����������������� 137 137 1881HZ 138 215-K21ZN 23 2060355-K 200�������������������������������� 330 1881NN����������������������� 218 218 200 20603SS-L������������������ 132 132 209402 209402������������������������� 153 153 215-10555 215-105SS������������������ 138 215-K24BK����������������� 137 137 1881NN 138 215-K24BK 330 2060355-L 2011������������������������������ 217 1882HZ������������������������ 218 218 2011 20603ZN-K����������������� 132 132 209410 209410������������������������� 153 153 215-105ZN 215-105ZN����������������� 138 215-K24SS������������������ 137 137 1882HZ 217 20603ZN-K 138 215-K2455 2012������������������������������ 217 1882NN����������������������� 218 218 2012 20603ZN-L����������������� 132 132 20941055 209410SS�������������������� 153 153 215-110BK 215-110BK������������������ 138 215-K24ZN����������������� 137 137 1882NN 217 20603ZN-L 138 215-K24ZN 2013������������������������������ 217 1882NZ������������������������ 218 218 2013 20604SS-K������������������ 132 132 2094 2094������������������������������ 153 153 215-11055 215-110SS������������������ 138 215-K28BK����������������� 137 137 1882NZ 138 215-K28BK 217 2060455-K 201�������������������������������� 330 18��������������������������������������86 20604ZN-K����������������� 132 132 209455 2094SS������������������������� 153 153 215-110ZN 215-110ZN����������������� 138 215-K28SS������������������ 137 137 330 20604ZN-K 18 86 201 138 215-K2855 2014������������������������������ 217 188A����������������������������� 193 193 2014 20604ZN-L����������������� 132 132 20950155 209501SS�������������������� 150 150 215-11555 215-115SS������������������ 138 215-K28ZN����������������� 137 137 217 20604ZN-L 138 215-K28ZN 188A 2015������������������������������ 217 188SS��������������������������� 193 193 2015 2060SS-K�������������������� 132 132 20951155 209511SS�������������������� 155 155 215-120BK 215-120BK������������������ 138 215-K33ZN����������������� 136 136 138 215-K33ZN 18855 217 206055-K 2016������������������������������ 217 188 XXXX X X�������������������� 218 218 2016 2060SS-L��������������������� 132 132 2095 2095������������������������������ 151 151 215-120SS������������������ 138 215-K34ZN����������������� 136 136 188 138 215-K34ZN 217 206055-L 215-12055 2018������������������������������ 217 86 2018 18BK-01��������������������������86 2060ZN-K������������������� 132 132 209555 2095SS������������������������� 151 151 215-120ZN 215-120ZN����������������� 138 2160������������������������������ 148 148 217 2060ZN-K 18BK-01 138 2160 2018SS������������������������� 217 86 201855 18BK-50��������������������������86 2060ZN-L�������������������� 132 132 209601 209601������������������������� 151 151 215-125BK 215-125BK������������������ 138 2160SS������������������������� 148 148 217 2060ZN-L 18BK-50 138 216055 2019������������������������������ 217 2019 217 18BK��������������������������������86 20611SS-L������������������ 132 132 2096 2096������������������������������ 151 151 215-125ZN 215-125ZN����������������� 138 2162������������������������������ 148 148 2061155-L 18BK 86 138 2162 2019SS������������������������� 217 18S3060 ��������������������� 220 220 201955 20611ZN-L����������������� 132 132 209655 2096SS������������������������� 151 151 215-130BK 215-130BK������������������ 138 2162SS������������������������� 148 148 217 20611ZN-L 1853060 138 216255 2020������������������������������ 217 18S4040 �������������������� 220 220 2020 20612SS-L������������������ 132 132 2097 2097������������������������������ 151 151 215-130ZN����������������� 138 2167������������������������������ 148 148 217 2061255-L 215-130ZN 1854040 138 2167 2020SS������������������������� 217 18S4050 ��������������������� 220 220 202055 20612ZN-L����������������� 132 132 209755 2097SS������������������������� 151 151 215-140BK 215-140BK������������������ 137 2167SS������������������������� 148 148 217 20612ZN-L 137 216755 1854050
332 332
Download www.spep.com Download3DmoDELs @ @ www.spep.com
Hinges and Hinges and Industrial industrial Hardware Hardware
3 3
3-10BK01�������������������� 120 120 3-10BK01 120 3-10BK02�������������������� 120 3-10BK02 3-10BK03�������������������� 120 120 3-10BK03 3-10BK04�������������������� 120 120 3-10BK04 3-10BK05�������������������� 120 120 3-10BK05 2172SST-L01������������� 144 144 238CH 238CH�������������������������� 141 217255T-L01 141 3-10BK06�������������������� 120 120 142 3-10BK06 2172ZN-01����������������� 144 144 239BK 239BK��������������������������� 142 2172ZN-01 120 3-10BK07�������������������� 120 330 3-10BK07 145 240 2173SS-K�������������������� 145 240�������������������������������� 330 217355-K 3-10BK08�������������������� 120 120 330 3-10BK08 2173SS-L01���������������� 145 145 245 245�������������������������������� 330 217355-L01 3-11BK01�������������������� 120 120 125 3-11BK01 2173ZN������������������������ 145 145 24655 246SS��������������������������� 125 2173ZN 3-11BK02�������������������� 120 24 3-11BK02 120 2175������������������������������ 127 127 2455H 24SSH�����������������������������24 2175 3-11BK03�������������������� 120 120 330 3-11BK03 2176-01����������������������� 127 127 250 250�������������������������������� 330 2176-01 120 3-11BK04�������������������� 120 212 3-11BK04 127 250X728 2176������������������������������ 127 250X72B���������������������� 212 2176 3-11BK05�������������������� 120 120 212 3-11BK05 2177-01����������������������� 127 127 250X7255 250X72SS������������������� 212 2177-01 3-11BK06�������������������� 120 120 220 3-11BK06 2177������������������������������ 127 127 255404055P 25S4040SSP ����������� 220 2177 3-11BK07�������������������� 120 120 220 3-11BK07 2178SS������������������������� 127 127 2554050 25S4050���������������������� 220 217855 3-11BK08�������������������� 120 120 220 3-11BK08 2178ZN������������������������ 127 127 2555050 25S5050 ��������������������� 220 2178ZN 120 3-12BK01�������������������� 120 220 3-12BK01 195 220 2185SS01�������������������� 25S5060���������������������� 21855501 195 2555060 3-12BK02�������������������� 120 120 220 3-12BK02 2185SS������������������������� 195 195 2556060 25S6060 ��������������������� 220 218555 3-12BK03�������������������� 120 120 25 3-12BK03 2185ZN������������������������ 195 195 25ZN 25ZN�������������������������������25 2185ZN 3-12BK04�������������������� 120 26 3-12BK04 120 2188SS01�������������������� 142 142 26-10BK 26-10BK��������������������������26 21885501 3-12BK05�������������������� 120 120 26 3-12BK05 2189SS������������������������� 142 142 26 26��������������������������������������26 218955 120 3-12BK06�������������������� 120 294 3-12BK06 105 294 2196������������������������������ 2702������������������������������ 2196 105 2702 3-12BK07�������������������� 120 120 294 3-12BK07 220-100SS������������������ 156 156 2704 2704������������������������������ 294 220-10055 3-12BK08�������������������� 120 120 294 3-12BK08 220-200SS������������������ 156 156 2706 2706������������������������������ 294 220-20055 3-13BK01�������������������� 120 120 294 3-13BK01 220-250SS������������������ 156 156 2708 2708������������������������������ 294 220-25055 120 3-13BK02�������������������� 120 26 3-13BK02 156 27 220-300SS������������������ 156 27��������������������������������������26 220-30055 3-13BK03�������������������� 120 120 294 3-13BK03 220-350SS������������������ 156 272SS��������������������������� 294 220-35055 156 27255 120 3-13BK04�������������������� 120 294 3-13BK04 157 27455 220-400SS������������������ 157 274SS��������������������������� 294 220-40055 3-13BK05�������������������� 120 120 26 3-13BK05 220-450SS������������������ 157 157 28-10BK 28-10BK��������������������������26 220-45055 3-13BK06�������������������� 120 120 26 3-13BK06 220-500SS������������������ 157 157 28-50A 28-50A����������������������������26 220-50055 120 3-13BK07�������������������� 120 290 3-13BK07 157 2803 220-550SS������������������ 157 2803������������������������������ 290 220-55055 3-13BK08�������������������� 120 120 290 3-13BK08 221SS1������������������������� 143 143 2803PL 2803PL������������������������� 290 221551 120 3-13K���������������������������� 120 290 3-13K 143 2804 221SS��������������������������� 143 2804������������������������������ 290 22155 3-14BK01�������������������� 120 120 290 3-14BK01 221ZN1������������������������ 143 143 2804PL 2804PL������������������������� 290 221ZN1 3-14BK02�������������������� 120 120 290 3-14BK02 221ZN�������������������������� 143 143 2806 2806������������������������������ 290 221ZN 120 3-14BK03�������������������� 120 290 3-14BK03 22��������������������������������������25 2806PL������������������������� 290 22 25 2806PL 3-14BK04�������������������� 120 120 295 3-14BK04 222SS1������������������������� 143 143 2805 280S������������������������������ 295 222551 120 3-14BK05�������������������� 120 295 3-14BK05 143 280T-01 222SS��������������������������� 143 280T-01����������������������� 295 22255 3-14BK06�������������������� 120 120 295 3-14BK06 222ZN1������������������������ 143 143 280U 280U����������������������������� 295 222ZN1 3-14BK07�������������������� 120 120 290 3-14BK07 223BK-01�������������������� 158 158 2812 2812������������������������������ 290 223BK-01 120 3-14BK08�������������������� 120 290 3-14BK08 158 2812PL 223BK��������������������������� 158 2812PL������������������������� 290 223BK 30-01�������������������������������86 290 30-01 86 224SS1������������������������� 143 143 2817 2817������������������������������ 290 224551 300B��������������������������������28 295 300B 28 143 281U 224SS��������������������������� 143 281U����������������������������� 295 22455 300CH�����������������������������28 26 300CH 28 224ZN1������������������������ 143 143 28 28��������������������������������������26 224ZN1 302-SS-00����������������������32 291 302-55-00 32 224ZN�������������������������� 143 143 2830ZN 2830ZN������������������������ 291 224ZN 305B��������������������������������28 290 305B 28 143 2833 224ZN1B��������������������� 143 2833������������������������������ 290 224ZN1B 305BTHD01������������������28 290 305 BTH D01 28 224ZNB����������������������� 143 143 2834 2834������������������������������ 290 224ZNB 305BTHD�����������������������28 290 305 BTH D 28 158 2836 225-100SS������������������ 158 2836������������������������������ 290 225-10055 305P��������������������������������28 295 305P 28 225-150SS������������������ 158 158 2835 283S������������������������������ 295 225-15055 306�����������������������������������32 290 306 32 225-200SS������������������ 158 158 2847 2847������������������������������ 290 225-20055 30��������������������������������������86 86 225-300SS������������������ 158 158 2847PL 2847PL������������������������� 290 225-30055 290 30 308SS-1250�������������������31 290 30855-1250 31 225-350SS������������������ 158 158 2853 2853������������������������������ 290 225-35055 308SS01-1250��������������31 290 3085501-1250 31 225-400SS������������������ 158 158 2854 2854������������������������������ 290 225-40055 309-S-CH�����������������������29 293 309-5-CH 29 225�������������������������������� 330 330 2862 2862������������������������������ 293 225 309-S-ZN�����������������������29 293 309-5-ZN 29 226�������������������������������� 330 330 2876 2876������������������������������ 293 226 309-SS-P������������������������29 291 309-55-P 29 227�������������������������������� 330 330 2883 2883������������������������������ 291 227 309-SS-PS����������������������29 291 309-55-P5 29 228�������������������������������� 330 330 2884 2884������������������������������ 291 228 309BO-SS-P������������������29 25 30960-55-P 29 229�������������������������������� 330 330 29-01 29-01�������������������������������25 229 309TH-S-ZN01�������������29 291 309TH-5-ZN01 29 230�������������������������������� 330 330 290 290�������������������������������� 291 230 309TH-S-ZN������������������29 25 309TH-5-ZN 29 2311������������������������������ 330 330 29 29��������������������������������������25 2311 309TH-SS-P1����������������29 295 309TH-55-P1 29 231�������������������������������� 330 330 295 295�������������������������������� 295 231 309TH-SS-P�������������������29 292 309TH-55-P 29 232�������������������������������� 330 330 2963BK 2963BK������������������������ 292 232 309THB-S-ZN1������������29 292 309THB-5-ZN1 29 23��������������������������������������24 2963ZN������������������������ 292 24 2963ZN 23 309THB-S-ZN���������������29 292 309THB-5-ZN 29 233SS��������������������������� 125 125 2964BK 2964BK������������������������ 292 23355 309THBO-SS-P������������29 29 292 309THBO-55-P 234SS1������������������������� 143 143 2964ZN 2964ZN������������������������ 292 234551 309THBO-SS-P1����������29 29 292 309THBO-55-P1 234SS��������������������������� 143 143 2965BK 2965BK������������������������ 292 23455 309THBO-SS-P3����������29 292 309THBO-55-P3 29 234ZN1������������������������ 143 143 2965ZN 2965ZN������������������������ 292 234ZN1 309THBO-SS-P4����������29 29 292 309THBO-55-P4 234ZN�������������������������� 143 143 2966BK 2966BK������������������������ 292 234ZN 30BK-01��������������������������86 292 30BK-01 86 237-LK������������������������� 141 141 2966ZN 2966ZN������������������������ 292 237-LK 310-S-CH�����������������������29 25 310-5-CH 29 237�������������������������������� 141 141 29BK 29BK��������������������������������25 237 310-S-ZN�����������������������29 25 310-5-ZN 29 237BK-LK�������������������� 141 141 295501 29SS01����������������������������25 237BK-LK 310-SS-P������������������������29 155 310-55-P 29 237BK��������������������������� 141 141 2C 2C���������������������������������� 155 237BK 310-SS-PS����������������������29 155 310-55-P5 29 237CH-LK������������������� 141 141 2D 2D���������������������������������� 155 237CH-LK
3354���������������������������������36 36BK-01��������������������������39 3101���������������������������������40 3101 40 3354 36 36BK-01 39 3102���������������������������������40 335501����������������������������36 36BK-01L�����������������������39 3102 40 335501 36 36BK-01L 39 3103���������������������������������40 3355���������������������������������36 36BK-02��������������������������39 3103 40 3355 36 36BK-02 39 3104���������������������������������40 336001����������������������������35 36BK-02L�����������������������39 3104 40 336001 35 36BK-02L 39 311-S-CH�����������������������30 336001LK�����������������������34 36BK-03��������������������������39 311-5-CH 30 336001 LK 34 36BK-03 39 311-S-ZN�����������������������30 336003����������������������������35 36BK-03L�����������������������39 311-5-ZN 30 336003 35 36BK-03L 39 35 36BK-04 311-SS-P02�������������������30 336004����������������������������35 36BK-04��������������������������39 311-55-P02 30 336004 39 311-SS-P������������������������30 336004LK�����������������������34 36BK-04L�����������������������39 39 311-55-P 30 336004LK 34 36BK-04L 311-SS-PS����������������������30 3360���������������������������������35 36BK-05��������������������������39 311-55-P5 30 3360 35 36BK-05 39 3121���������������������������������40 3360LK���������������������������34 36BK-05L�����������������������39 3121 40 3360LK 34 36BK-05L 39 3122���������������������������������40 336101����������������������������35 36BK-06��������������������������39 3122 35 36BK-06 40 336101 39 3123���������������������������������40 3361���������������������������������35 36BK-06L�����������������������39 3123 40 3361 35 36BK-06L 39 3124���������������������������������40 336201����������������������������35 36CH-01�������������������������38 3124 40 336201 35 36CH-01 38 35 36CH-01L 330 3362 3141������������������������������ 330 3362���������������������������������35 36CH-01L����������������������38 3141 38 3142������������������������������ 330 330 336301 336301����������������������������35 36CH-02�������������������������38 3142 35 36CH-02 38 315105����������������������������40 3363���������������������������������35 36CH-02L����������������������38 315105 40 3363 35 36CH-02L 38 3151���������������������������������37 336401����������������������������35 36CH-03�������������������������38 3151 35 36CH-03 38 37 336401 3152���������������������������������37 3364���������������������������������35 36CH-03L����������������������38 3152 37 3364 35 36CH-03L 38 315301����������������������������37 336501����������������������������35 36CH-04�������������������������38 315301 37 336501 35 36CH-04 38 315304����������������������������37 3365���������������������������������35 36CH-04L����������������������38 315304 37 3365 35 36CH-04L 38 3153���������������������������������37 337001LK�����������������������34 36CH-05�������������������������38 3153 37 337001 LK 34 36CH-05 38 315403����������������������������37 337001LKBK�����������������34 36CH-05L����������������������38 315403 37 337001 LKBK 34 36CH-05L 38 315405����������������������������40 337004LK�����������������������34 36CH-06�������������������������38 315405 40 337004LK 34 36CH-06 38 3154���������������������������������37 3370LK���������������������������34 36CH-06L����������������������38 3154 37 3370LK 34 36CH-06L 38 3155���������������������������������37 3370LKBK����������������������34 371�������������������������������� 111 111 34 371 3155 37 3370LKBK 315601����������������������������37 345001����������������������������36 375X72B���������������������� 212 212 315601 37 345001 36 375X728 3156���������������������������������37 3450���������������������������������36 375X72SS������������������� 212 212 3156 37 3450 36 375X7255 298 315701����������������������������37 345103����������������������������36 392-K��������������������� 31, 315701 37 345103 36 392-K 31,298 3157���������������������������������37 3451���������������������������������36 3921���������������������������������31 37 3451 3157 36 3921 31 330 345201 3158������������������������������ 330 345201����������������������������36 3922���������������������������������31 3158 36 3922 31 315901����������������������������37 3452���������������������������������36 39310BC---76���������������23 37 3452 315901 36 39310BC---76 23 3159���������������������������������37 345301����������������������������36 3940���������������������������������33 3159 37 345301 36 3940 33 330 3453 3159SS������������������������� 330 3453���������������������������������36 3940LK���������������������������33 315955 36 3940LK 33 315LSS-01���������������������69 345401����������������������������36 3941���������������������������������33 315L55-01 69 345401 36 3941 33 315LSS����������������������������69 3454���������������������������������36 3941LK���������������������������33 315L55 69 3454 36 3941 LK 33 315LZN-01��������������������69 345501����������������������������36 3950-333������������������������93 315LZN-01 69 345501 36 3950-333 93 315RSS-01���������������������69 3455���������������������������������36 3950-751������������������������93 315R55-01 69 3455 36 3950-751 93 315RSS���������������������������69 346001����������������������������35 3950���������������������������������93 315R55 69 346001 35 3950 93 315RZN-01��������������������69 3460���������������������������������35 3950SST�������������������������92 315RZN-01 35 395055T 69 3460 92 319�����������������������������������47 346101����������������������������35 3950SST-333����������������92 47 346101 35 395055T-333 319 92 31BK��������������������������������27 3461���������������������������������35 3951���������������������������������93 27 3461 31 BK 35 3951 93 31ZN-01���������������������� 107 107 346201 346201����������������������������35 3951SST�������������������������92 31ZN-01 35 395155T 92 107 3462 31ZN-02���������������������� 107 3462���������������������������������35 3952���������������������������������93 31ZN-02 35 3952 93 31ZN���������������������������� 107 107 346301 346301����������������������������35 3953���������������������������������93 31ZN 35 3953 93 35 3954 321-S-ZN�����������������������30 3463���������������������������������35 3954���������������������������������93 321-5-ZN 30 3463 93 322-S-ZN�����������������������30 346401����������������������������35 3955-333������������������������93 322-5-ZN 35 3955-333 93 30 346401 324SS������������������������������32 3464���������������������������������35 3955-751������������������������93 32 3464 32455 35 3955-751 93 3251���������������������������������37 346501����������������������������35 3955SST-333����������������92 3251 37 346501 35 395555T-333 92 325205����������������������������40 3465���������������������������������35 3SS102001����������������� 221 221 325205 40 3465 35 355102001 3252���������������������������������37 359�����������������������������������47 47 3252 37 359 325301����������������������������37 35BK-01��������������������������39 37 35BK-01 39 325301 4 4 3253���������������������������������37 35BK-01L�����������������������39 39 3253 37 35BK-01L 4-10BK05�������������������� 121 121 39 4-10BK05 3254���������������������������������37 35BK-02��������������������������39 3254 37 35BK-02 4-10BK10�������������������� 121 39 4-10BK10 121 3255���������������������������������37 35BK-02L�����������������������39 3255 37 35BK-02L 4-10BK15�������������������� 121 121 39 4-10BK15 325601����������������������������37 35BK-03��������������������������39 325601 37 35BK-03 4-11BK05�������������������� 121 121 39 4-11BK05 3256���������������������������������37 35BK-03L�����������������������39 3256 37 35BK-03L 4-11BK10�������������������� 121 39 4-11BK10 121 325701����������������������������37 35BK-04��������������������������39 37 35BK-04 325701 4-11BK15�������������������� 121 121 39 4-11BK15 3257���������������������������������37 35BK-04L�����������������������39 3257 37 35BK-04L 4-12BK05�������������������� 121 39 4-12BK05 121 325901����������������������������37 35BK-05��������������������������39 325901 37 35BK-05 4-12BK10�������������������� 121 121 39 4-12BK10 3259���������������������������������37 35BK-05L�����������������������39 3259 37 35BK-05L 4-12BK15�������������������� 121 121 39 4-12BK15 32CH01��������������������������27 35BK-06��������������������������39 32CH01 27 35BK-06 4-13BK05�������������������� 121 121 39 4-13BK05 32CH�������������������������������27 35BK-06L�����������������������39 32CH 27 35BK-06L 4-13BK10�������������������� 121 121 38 4-13BK10 32ZN-01���������������������� 107 107 35CH-01 35CH-01�������������������������38 32ZN-01 4-13BK15�������������������� 121 121 38 4-13BK15 32ZN-02���������������������� 107 107 35CH-01L����������������������38 32ZN-02 35CH-01 L 4-14BK05�������������������� 121 121 38 4-14BK05 32ZN���������������������������� 107 107 35CH-02 35CH-02�������������������������38 32ZN 4-14BK10�������������������� 121 121 38 4-14BK10 333�������������������������������� 330 330 35CH-02L 35CH-02L����������������������38 333 4-14BK15�������������������� 121 38 4-14BK15 121 335001����������������������������36 35CH-03�������������������������38 335001 36 35CH-03 4-14K���������������������������� 121 121 38 4-14K 3350���������������������������������36 35CH-03L����������������������38 3350 36 35CH-03L 4-15BK05�������������������� 121 38 4-15BK05 121 335101����������������������������36 35CH-04�������������������������38 335101 36 35CH-04 4-15BK10�������������������� 121 121 38 4-15BK10 3351���������������������������������36 35CH-04L����������������������38 3351 36 35CH-04L 4-15BK15�������������������� 121 121 38 4-15BK15 335201����������������������������36 35CH-05�������������������������38 335201 36 35CH-05 4-15K���������������������������� 121 38 4-15K 121 3352���������������������������������36 35CH-05L����������������������38 3352 36 35CH-05L 4-16BK05�������������������� 121 121 38 4-16BK05 335301����������������������������36 35CH-06�������������������������38 335301 36 35CH-06 4-16BK10�������������������� 121 38 4-16BK10 121 3353���������������������������������36 35CH-06L����������������������38 3353 36 35CH-06L 4-16BK15�������������������� 121 121 47 4-16BK15 335401����������������������������36 361�����������������������������������47 335401 36 361
Index
2167SST���������������������� 148 148 237CH 237CH�������������������������� 141 216755T 141 2168������������������������������ 148 148 238-LK������������������������� 141 238-LK 141 2168 141 2168SS������������������������� 148 148 238 238�������������������������������� 141 216855 141 144 238BK-LK 2172SS-K�������������������� 144 238BK-LK�������������������� 141 217255-K 141 2172SS-L01���������������� 144 144 238BK 238BK��������������������������� 141 217255-L01 141 2172SS������������������������� 144 144 238CH-LK 238CH-LK������������������� 141 217255
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
333 333
F m x
Index
SIERRA PACIFIC ENGINEERING AND PRODUCTS 4-16K 4-16K���������������������������� 121 121 41-05 41-05�������������������������������83 44CH01 44CH01����������������������� 110 83 47BK01-751��������������� 110 47BK01-751 ._ ........ _ 111 111 5-20BC-4. 5-20BC-4��������������������� 118 50L-LK����������������������������98 118 50L-LK_ 98 4-17BK05 4-17BK05�������������������� 121 121 41-05BK 41-05BK��������������������������83 44CH���������������������������� 110 83 44CH 110 47BK01 47BK01������������������������ 111 111 5-20BC-8 5-20BC-8��������������������� 118 118 50L 50L�����������������������������������98 98 4-17BK10 4-17BK10�������������������� 121 121 41-07 41-07�������������������������������83 44G-751 44G-751���������������������� 110 83 110 47BK 47BK����������������������������� 111 111 5-20BC������������������������� 118 5-20BC 118 50M-12���������������������������99 50M-12 99 4-17BK15 4-17BK15�������������������� 121 121 41-07BK 41-07BK��������������������������83 44G01-751 44G01-751����������������� 110 83 110 47CH-751������������������� 111 47CH-751 111 5-20BK-12������������������� 5-20BK-12 118 118 50M-1801����������������������99 50M-1801 99 4-18BK05�������������������� 121 4-18BK05 121 41-08BK 41-08BK��������������������������83 44G01�������������������������� 110 83 44G01 47CH01-751�������������� 111 110 47CH01-751 111 5-20BK-4��������������������� 5-20BK-4 118 50M-18���������������������������99 118 50M-18 99 4-18BK10 4-18BK10�������������������� 121 121 41-08P 41-08P����������������������������83 44G������������������������������� 110 83 44G 110 47CH01 47CH01����������������������� 111 5-20BK-8��������������������� 118 111 5-20BK-8 50M-22���������������������������99 118 50M-22 99 4-18BK15 4-18BK15�������������������� 121 121 41-08SS��������������������������83 41-0855 44TC-751 44TC-751�������������������� 110 83 110 47CH 47CH���������������������������� 111 111 5-20BK������������������������� 5-20BK 118 118 50M-30���������������������������99 50IV1-30 99 4-18K 4-18K���������������������������� 121 121 41-09BK 41-09BK��������������������������83 44TC-KD���������������������� 110 83 44TC-KD 110 47G-751 47G-751���������������������� 111 111 5-20CH-12������������������ 5-20CH-12 118 50M-333�������������������������99 118 50M-333 99 4-19BK05�������������������� 121 121 41-1013 4-19BK05 41-1013��������������������������83 44TC01-751��������������� 83 47G01-751����������������� 44TC01-751 ......... ...... 110 110 5-20CH-4�������������������� 118 47G01-751 ..._ ........ ... 111 111 5-20CH-4 118 50M-333P01�����������������99 50M-333P01 99 4-19BK10 4-19BK10�������������������� 121 121 41-1013BK 41-1013BK���������������������83 44TC01-KD����������������� 110 83 44TC01-KD 110 47G01 47G01�������������������������� 111 111 5-20CH-8 5-20CH-8�������������������� 118 50M-333P����������������������99 118 50M-333P 99 4-19BK15 4-19BK15�������������������� 121 121 41-10 41-10�������������������������������83 44TC01������������������������ 110 83 44TC01 110 47G 47G������������������������������� 111 111 5-20CH 5-20CH������������������������ 118 50M-751�������������������������99 118 50M-751 99 4-19K01 4-19K01��������������������������81 81 41-10BK 41-10BK��������������������������83 44TC����������������������������� 110 83 44TC 110 47TC-751 47TC-751�������������������� 111 111 5-20SS-12������������������� 118 5-20SS-12 50M-751P01�����������������99 118 50M-751P01 99 4-19K 4-19K���������������������������� 121 121 41-1101 41-1101��������������������������88 450G��������������������������������50 88 450G 47TC01-751��������������� 111 50 47TC01-751 111 5-20SS-4��������������������� 5-20SS-4 118 50M-751P����������������������99 118 50M-751P 99 4-21 BK05 4-21BK05�������������������� 121 121 41-11 41-11�������������������������������88 454SS01�������������������������53 88 4545501 53 47TC01 47TC01������������������������ 111 111 5-20SS-8��������������������� 5-20SS-8 118 50M 118 50M����������������������������������99 99 4-21 BK10 4-21BK10�������������������� 121 121 41-11BK 41-11BK��������������������������88 454SS02�������������������������53 88 4545502 47TC 47TC����������������������������� 111 53 111 5-20SS�������������������������� 5-2055 118 118 53BK-02��������������������������91 53BK-02 91 4-21 BK15 4-21BK15�������������������� 121 121 41-11SST 41-11SST������������������������88 53 480-501 454SS03�������������������������53 88 4545503 480-501��������������������������59 59 5-25BC-12 5-25BC-12������������������ 119 119 53G-01����������������������������91 53G-01 91 4-21K 4-21K���������������������������� 121 121 41-12BK. 41-12BK��������������������������88 53 480-502 454SS������������������������������53 88 45455. 480-502��������������������������59 5-25BC-4��������������������� 119 59 5-25BC-4. 54CH�������������������������������97 119 54CH 97 4-22BK05 4-22BK05�������������������� 121 121 41-12CH 41-12CH�������������������������88 457-501��������������������������53 88 457-501 53 480-545 480-545��������������������������59 5-25BC-8��������������������� 119 59 5-25BC-8 54SS���������������������������������97 119 54S5 97 4-22BK10 4-22BK10�������������������� 121 121 41-12P 41-12P����������������������������88 457-545��������������������������53 88 457-545 53 480-751 480-751��������������������������59 5-25BC������������������������� 119 59 5-25BC 55L-333����������������������� 102 119 55L-333 102 4-22BK15 4-22BK15�������������������� 121 121 41-1255T 41-12SST������������������������88 457�����������������������������������53 88 457 480G��������������������������������58 5-25BK-12������������������� 119 53 480G 58 5-25BK-12 55L-3331��������������������� 102 119 55L-3331 102 4-22K 4-22K���������������������������� 121 121 41-13BK 41-13BK��������������������������88 458�����������������������������������53 88 458 53 481P 481P��������������������������������57 5-25BK-4��������������������� 119 57 5-25BK-4 55L-3335��������������������� 102 119 55L-3335 102 4-30BK05�������������������� 122 4-30BK05 122 41-13CH 41-13CH�������������������������88 460�����������������������������������51 88 460 51 4811 481PSS���������������������������57 355 57 5-25BK-8 5-25BK-8��������������������� 119 55L-751����������������������� 102 119 55L-751 102 4-30BK10�������������������� 122 4-30BK10 122 41-13P 41-13P����������������������������88 460H��������������������������������51 88 460H 484-501��������������������������59 51 484-501 59 5-25BK 5-25BK������������������������� 119 55L-7511��������������������� 102 119 55L-7511 102 4-30BK15�������������������� 122 4-30BK15 122 41-13SST 41-13SST������������������������88 461�����������������������������������51 88 461 484-502-01��������������������58 51 484-502-01 5-25CH-12������������������ 119 58 5-25CH-12 55L-7515��������������������� 102 119 55L-7515 102 4-32BK05�������������������� 122 4-32BK05 122 41-14BK 41-14BK��������������������������90 461H��������������������������������51 90 461H 484-502��������������������������59 51 484-502 59 5-25CH-4 5-25CH-4�������������������� 119 55M-333���������������������� 102 119 55M-333 102 4-32BK10 4-32BK10�������������������� 122 122 41-15 41-15�������������������������������88 88 461HNR 461HNR��������������������������51 484-545��������������������������59 51 484-545 5-25CH-8�������������������� 119 59 5-25CH-8 55M-3335������������������� 102 119 55M-3335 102 4-32BK15 4-32BK15�������������������� 122 122 41-15BK 41-15BK��������������������������88 461NR�����������������������������51 88 461NR 51 484-751 59 5-25CH 484-751��������������������������59 5-25CH������������������������ 119 55M-751���������������������� 102 119 55M-751 102 4-38BK05�������������������� 122 4-38BK05 122 41-15551 41-15SST������������������������88 462�����������������������������������51 88 462 51 486LH-01 486LH-01�����������������������58 500X72B���������������������� 212 58 500X72B 212 55M-7515 55M-7515������������������� 102 102 4-38BK10�������������������� 122 4-38BK10 122 41-16 41-16�������������������������������90 463�����������������������������������51 90 463 51 486LH-751��������������������58 486LH-751 500X72SS������������������� 212 58 500X7255 212 56L-333 56L-333����������������������� 102 102 4-38BK15�������������������� 122 4-38BK15 122 41-16BK 41-16BK��������������������������90 463NR�����������������������������51 90 463NR 51 486RH-01 486RH-01�����������������������58 505B��������������������������������28 58 505B 56L-3331��������������������� 102 28 56L-3331 102 4-53BK05�������������������� 122 4-53BK05 122 41-17 41-17�������������������������������90 465BK-LK�����������������������54 90 465 BK-LK 486RH-751��������������������58 54 486RH-751 50C00��������������������������� 100 58 50000 56L-3335��������������������� 102 102 100 56L-3335 4-53BK10�������������������� 122 4-53BK10 122 41-17BK 41-17BK��������������������������90 465BK������������������������������54 90 465 BK 489-KD���������������������������60 54 489-KD 50C02��������������������������� 100 60 500O2 56L-751����������������������� 102 100 56L-751 102 4-53BK15�������������������� 122 4-53BK15 122 41-17551 41-17SST������������������������90 466BK-LK�����������������������54 90 466BK-LK 491�����������������������������������57 54 491 50C04��������������������������� 100 57 50004 56L-7511��������������������� 102 100 56L-7511 102 40-00�������������������������������87 40-00 41-18BK��������������������������84 87 41-1813K 84 466BK. 466BK������������������������������54 491SS������������������������������57 54 49155 50C06��������������������������� 100 57 50006 100 56L-7515 56L-7515��������������������� 102 102 40-00BK��������������������������87 40-00BK 87 41-19BK 41-19BK��������������������������84 84 467BK-01 467BK-01�����������������������55 55 494-501-01 494-501-01��������������������59 59 50008 50C08��������������������������� 100 56M-333���������������������� 102 100 56M-333 102 40-01 40-01�������������������������������87 87 41-19CH 41-19CH�������������������������84 468P��������������������������������56 84 468P 495-01�����������������������������57 56 495-01 57 50C10 50C10��������������������������� 100 56M-3335������������������� 102 100 56M-3335 102 87 41-20BK 40-01BK��������������������������87 40-01 BK 41-20BK��������������������������91 91 469�����������������������������������51 469 51 496SS-L��������������������������60 49655-L 50C13��������������������������� 100 60 50C13 56M-751���������������������� 102 100 56M-751 102 40-02 40-02�������������������������������87 87 41-21BK 41-21BK��������������������������91 91 469NR 469NR�����������������������������51 496SS-R��������������������������60 51 49655-R 50C14��������������������������� 100 60 50C14 56M-7515������������������� 102 100 56M-7515 102 40-02BK��������������������������87 40-02BK 87 41-22BK 41-22BK��������������������������91 91 46BK-751 46BK-751�������������������� 110 110 49755-L 497SS-L��������������������������60 50C16��������������������������� 100 60 50C16 58��������������������������������������96 100 58 96 40-03�������������������������������87 40-03 87 41-23BK 41-23BK��������������������������91 46BK-KD���������������������� 110 91 46BK-KD 110 49755-R 497SS-R��������������������������60 50C18��������������������������� 100 60 50C18 58LLK������������������������������96 100 58LLK 96 40-03BK��������������������������87 40-03BK 87 41-24BK 41-24BK��������������������������91 46BK01-751��������������� 110 91 46BK01-751 110 49BK-751 49BK-751�������������������� 111 111 50C20��������������������������� 50C20 100 58MLK����������������������������96 100 58M LK 96 402 402�����������������������������������56 41-30�������������������������������84 56 41-30 46BK01-KD����������������� 84 49BK01-751��������������� 46BK01-KD— ........ ......110 110 49BK01-751 .... ........ _ 111 111 50C22��������������������������� 50C22 100 5901������������������������������ 100 5901...... ........ .. ........ ......303 303 404 404�����������������������������������52 41-30BK��������������������������84 52 41-30BK 46BK01������������������������ 110 84 46BK01 110 49BK01 49BK01������������������������ 111 111 50C24 50C24��������������������������� 100 5902������������������������������ 303 100 5902 303 404A 404A��������������������������������52 52 41-30BKLK 41-30BKLK��������������������84 46BK����������������������������� 110 84 46BK 110 49BK 49BK����������������������������� 111 111 50C25 50C25��������������������������� 100 5903������������������������������ 303 100 5903 303 404AH 404AH�����������������������������52 52 41-30LK 41-30LK��������������������������84 84 46CH-751 46CH-751������������������� 110 49CH-751������������������� 111 110 49CH-751 111 50C26��������������������������� 100 50C26 5A2025������������������������ 221 100 5A2025 221 404H02 404H02���������������������������52 41-60BK��������������������������81 52 41-60BK 46CH-KD 46CH-KD��������������������� 110 81 49CH01-751�������������� 111 110 49CH01-751 111 50C28��������������������������� 50C28 100 5S151501 ������������������ 220 100 55151501 220 404H 404H��������������������������������52 41-60TC��������������������������81 52 41-60TC 46CH01-751 46CH01-751�������������� 110 81 110 49CH01 49CH01����������������������� 111 111 50C30��������������������������� 50C30 100 100 40502ZN 40502ZN������������������������52 52 41-61BK 41-61BK��������������������������81 46CH01-KD���������������� 110 81 46CH01-KD 110 49CH 49CH���������������������������� 111 50C32��������������������������� 100 111 50C32 100 6 6 40502������������������������������52 40502 52 41-61TC 41-61TC��������������������������81 46CH01 46CH01����������������������� 110 81 49G-751���������������������� 111 110 49G-751 111 50C34��������������������������� 50C34 100 100 6-10BK����������������������������63 100 6-10BK 63 405�����������������������������������52 405 52 41-62BK 41-62BK��������������������������81 46CH 46CH���������������������������� 110 81 49G01-751����������������� 111 110 49G01-751 111 50C35��������������������������� 50C35 100 6-10BKCH751���������������63 100 6-10BKCH751 63 405A��������������������������������52 405A 52 41-62TC 41-62TC��������������������������81 46G-751���������������������� 110 81 46G-751 49G01�������������������������� 111 110 49G01...„ 111 50C36 50C36��������������������������� 100 6-10CH���������������������������62 100 6-10CH 62 405AH 405AH�����������������������������52 52 41-70BK 41-70BK��������������������������81 46G01-751 46G01-751����������������� 110 81 110 49G 49G������������������������������� 111 111 50C38 50C38��������������������������� 100 6-10CHLK����������������������62 100 6-10CHLK 62 405H��������������������������������52 405H 52 41-70TC 41-70TC��������������������������81 81 46G01�������������������������� 110 46G01 110 491C-751 49TC-751�������������������� 111 111 50C40 50C40��������������������������� 100 6-10SST��������������������������62 100 6-10551 62 407 407�����������������������������������52 52 41-71BK 41-71BK��������������������������81 81 46G������������������������������� 110 46G 49TC01-751��������������� 111 110 491C01-751 111 50C42 50C42��������������������������� 100 6-10SSTLK���������������������62 100 6-10SSTLK 62 407A 407A��������������������������������52 52 41-711C 41-71TC��������������������������81 461C-751 46TC-751�������������������� 110 81 110 49TC01 49TC01������������������������ 111 111 50C44��������������������������� 50C44 100 6-10WT���������������������������63 100 6-10WT 63 40801 �����������������������������52 40801 52 41-72BK 41-72BK��������������������������81 81 46TC-KD���������������������� 110 461C-KD 110 49TC 49TC����������������������������� 111 111 50C45��������������������������� 50C45 100 6-10WTCH751�������������63 100 6-10WTCH751 63 408�����������������������������������52 408 52 41-721C 41-72TC��������������������������81 81 461C01-751 46TC01-751��������������� 110 110 4PL 4PL�����������������������������������50 50C47��������������������������� 100 50 50C47 6-11BK����������������������������63 100 6-11BK 63 408A��������������������������������52 408A 41BK-00��������������������������82 52 41BK-00 46TC01-KD����������������� 110 82 461C01-KD 110 455 4SS�����������������������������������50 50C50��������������������������� 100 50 50050 6-11BKCH751���������������63 98 6-11BKCH751 63 40C05������������������������������87 40005 41BK-03��������������������������82 87 41BK-03 46TC01������������������������ 110 82 46TC01 110 4ZN 4ZN����������������������������������50 50L-12�����������������������������98 50 50L-12 6-11CH���������������������������62 98 6-11CH 62 40C10������������������������������87 40C10 87 41BK-07 41BK-07��������������������������83 46TC����������������������������� 110 83 46TC 110 50L-1801������������������������98 50L-1801 6-11CHLK����������������������62 98 6-11CHLK 62 40C15������������������������������87 40C15 41P-00SS�����������������������82 87 41P-00SS 471�����������������������������������50 82 471 50 50L-18�����������������������������98 50L-18 5 5 6-11SST��������������������������62 98 6-11551 62 40ZN 40ZN�������������������������������50 41P-03����������������������������82 50 41P-03 82 473 473�����������������������������������50 50 50L-22�����������������������������98 50L-22 5-15BK-1��������������������� 117 55 5-15BK-1 6-11SSTLK���������������������62 98 6-11SSTLK 62 41-00 41-00�������������������������������82 82 41P-0455 41P-04SS�����������������������82 82 474-CH751 474-CH751��������������������55 50L-22LK������������������������98 117 50L-22LK 5-15BK-2��������������������� 117 55 5-15BK-2 6-11WT���������������������������63 98 6-11WT 63 41-00BK 41-00BK��������������������������82 82 41P-07 41P-07����������������������������83 474�����������������������������������55 83 474 50L-23LK������������������������98 117 50L-23LK 5-15BK-3��������������������� 117 59 5-15BK-3 6-11WTCH751�������������63 98 6-11WTCH751 63 41-00P 41-00P����������������������������82 82 41P-08 41P-08����������������������������83 475-501��������������������������59 83 475-501 50L-30�����������������������������98 117 50L-30 5-15BK������������������������� 117 117 59 5-15BK 6-12BK����������������������������63 98 6-12BK 63 41-00SS��������������������������82 41-0055 82 44BK-751 44BK-751�������������������� 110 110 475-502 475-502��������������������������59 50L-333��������������������������98 50L-333 5-15CH-1�������������������� 117 59 5-15CH-1 6-12BKCH751���������������63 98 6-12BKCH751 63 41-00SST������������������������82 41-00SST 82 44BK-KD 44BK-KD���������������������� 110 110 475-545 475-545��������������������������59 50L-333LK���������������������98 117 50L-333LK 5-15CH-2�������������������� 117 117 50L-333P01 59 5-15CH-2 6-12CH���������������������������62 98 6-12CH 62 41-01BK 84 44BK01-751 41-01BK��������������������������84 44BK01-751��������������� 110 110 476-501-01 476-501-01��������������������59 50L-333P01�������������������98 5-15CH-3�������������������� 117 59 5-15CH-3 117 50L-333P02 6-12CHLK����������������������62 98 6-12CHLK 62 41-02 41-02�������������������������������82 82 44BK01-KD 44BK01-KD����������������� 110 110 477-501 477-501��������������������������59 50L-333P02�������������������98 5-15CH������������������������ 117 59 5-15CH 6-12SST��������������������������62 98 6-12551 62 41-02BK 41-02BK��������������������������82 82 44BK01 44BK01������������������������ 110 110 477-502 477-502��������������������������59 50L-333P�����������������������98 117 50L-333P 5-20-12������������������������ 118 59 5-20-12 6-12SSTLK���������������������62 98 6-12SSTLK 62 41-03 41-03�������������������������������82 82 44BK 44BK����������������������������� 110 110 477-545 477-545��������������������������59 50L-751��������������������������98 118 50L-751 5-20-4�������������������������� 118 55 5-20-4 6-12WT���������������������������63 98 6-12WT 63 41-03BK 41-03BK��������������������������82 82 44CH-751 44CH-751������������������� 110 110 478-01 478-01�����������������������������55 50L-751LK���������������������98 118 50L-751 LK 5-20-8�������������������������� 118 55 5-20-8 6-12WTCH751�������������63 98 6-12WTCH751 63 41-04 41-04�������������������������������82 82 44CH-KD 44CH-KD��������������������� 110 110 478 478�����������������������������������55 50L-751P01�������������������98 118 50L-751 P01 5-20������������������������������ 118 60 5-20 6-13BK����������������������������63 98 6-138K 63 41-048K 41-04BK��������������������������82 82 44CH01-751 44CH01-751�������������� 110 110 479-KD 479-KD���������������������������60 50L-751P�����������������������98 118 50L-751P 5-20BC-12������������������ 118 5-20BC-12 118 50L 6-13BKCH751���������������63 98 6-13BKCH751 63 41-04SS 41-04SS��������������������������82 82 44CH01-KD 44CH01-KD���������������� 110 110 478K-751 47BK-751�������������������� 111 111 50L-E200������������������������98 -E200
334
@ www.spep.com Download Download -)DMODELS @ www.spep.com J
Hinges and Hinges and Industrial Industrial Hardware Hardware
9 9
9-10BK01�������������������� 112 112 9-10BK01 112 9-10BK02�������������������� 112 9-10BK02 9-10BK03�������������������� 112 112 9-10BK03 9-10BK04�������������������� 112 112 9-10BK04 9-10BK05�������������������� 112 112 9-10BK05 9-10BK06�������������������� 112 112 9-10BK06 112 9-10BK07�������������������� 112 9-10BK07 9-10BK08�������������������� 112 112 9-10BK08 9-10BK09�������������������� 112 112 9-10BK09 9-10BK10�������������������� 112 112 9-10BK10 9-10BK11�������������������� 112 112 9-10BK11 112 9-10BK12�������������������� 112 9-10BK12 9-12BK01�������������������� 112 112 9-12BK01 9-12BK02�������������������� 112 112 9-12BK02 9-12BK03�������������������� 112 112 9-12BK03 9-12BK04�������������������� 112 112 9-12BK04 112 9-12BK05�������������������� 112 9-12BK05 9-12BK06�������������������� 112 112 9-12BK06 9-12BK07�������������������� 112 112 9-12BK07 9-12BK08�������������������� 112 112 9-12BK08 9-12BK09�������������������� 112 112 9-12BK09 604SS��������������������������� 314 314 6SS2530���������������������� 221 711�������������������������������� 186 186 748-31.5 748-31.5���������������������� 103 103 8-14TC-4��������������������� 115 221 711 8-14TC-4 115 60455 6552530 112 9-12BK10�������������������� 115 9-12BK10 112 314 221 176 103 115 604ZN�������������������������� 6SST1515�������������������� 716-01�������������������������� 748-47.2���������������������� 8-14TC-8��������������������� 221 716-01 176 748-47.2 604ZN 314 65511515 103 8-141C-8 9-12BK11�������������������� 112 112 9-12BK11 605SS��������������������������� 314 314 6SST1520�������������������� 221 716-02�������������������������� 175 175 748-7.8 748-7.8������������������������� 103 103 804�������������������������������� 319 221 716-02 60555 65511520 804 319 9-12BK12�������������������� 112 112 319 9-12BK12 605ZN�������������������������� 314 65512020 6SST2020�������������������� 221 716-04�������������������������� 176 176 753 753�������������������������������� 178 178 805 805�������������������������������� 319 221 716-04 605 ZN 314 9-15BK01�������������������� 114 114 319 9-15BK01 606SS��������������������������� 314 314 65512525 6SST2525�������������������� 221 716-05�������������������������� 176 176 760 760�������������������������������� 186 186 807 807�������������������������������� 319 221 716-05 60655 114 9-15BK02�������������������� 114 316 9-15BK02 314 176 76055 186 856 606ZN�������������������������� 314 716-06�������������������������� 176 760SS��������������������������� 186 856�������������������������������� 316 606ZN 716-06 9-16BK01�������������������� 114 114 316 9-16BK01 607SS��������������������������� 314 716-10�������������������������� 175 762-11.375����������������� 183 857�������������������������������� 316 314 716-10 175 762-11.375 60755 183 857 7 7 114 9-16BK02�������������������� 114 316 9-16BK02 314 176 762-12.875 183 858-01 607ZN�������������������������� 314 716-11�������������������������� 176 762-12.875����������������� 183 858-01�������������������������� 316 716-11 607ZN 116 7-02CH-12 116 9-16BK11�������������������� 114 114 9-16BK11 609SS��������������������������� 310 310 7-02CH-12������������������ 716-12�������������������������� 176 176 762-12.937 762-12.937����������������� 183 183 858-05 858-05�������������������������� 316 716-12 60955 316 7-02CH-4�������������������� 116 7-02CH-4 116 9-16BK12�������������������� 114 114 9-16BK12 609ZN�������������������������� 310 310 716-25�������������������������� 179 179 762-15.75 762-15.75�������������������� 183 183 858 858�������������������������������� 316 716-25 609ZN 316 7-02CH-8�������������������� 116 113 9-20BK01�������������������� 113 318 9-20BK01 314 7-02CH-8 178 762-7.875 183 859 611SS��������������������������� 314 716-26�������������������������� 178 762-7.875�������������������� 183 859�������������������������������� 318 116 716-26 61155 7-10CH-12������������������ 116 7-10CH-12 116 9-20BK02�������������������� 113 113 9-20BK02 613ZN�������������������������� 314 314 716-27�������������������������� 178 178 762 762�������������������������������� 183 183 860 860�������������������������������� 318 613ZN 716-27 318 7-10CH-4�������������������� 116 116 716 113 9-20BK04�������������������� 113 318 9-20BK04 314 7-10CH-4 175 76255 183 86055 614ZN�������������������������� 314 716�������������������������������� 175 762SS��������������������������� 183 860SS��������������������������� 318 614ZN 116 7-10CH-8�������������������� 7-10CH-8 116 9-20BK05�������������������� 113 113 9-20BK05 615ZN�������������������������� 314 314 717�������������������������������� 175 175 765-15.875 765-15.875����������������� 183 183 861 861�������������������������������� 319 615ZN 717 319 7-12CH-12������������������ 116 7-12CH-12 116 9-20BK06�������������������� 113 113 9-20BK06 616ZN�������������������������� 314 314 717�������������������������������� 180 180 765-15.937 765-15.937����������������� 183 183 86155 861SS��������������������������� 319 616ZN 717 319 7-12CH-4�������������������� 116 66 7-12CH-4 113 9-20BK07�������������������� 113 316 9-20BK07 180 765-18.25 183 863ZN 617BK������������������������������66 718-01�������������������������� 180 765-18.25�������������������� 183 863ZN�������������������������� 316 617BK 116 718-01 7-12CH-8�������������������� 116 7-12CH-8 116 9-20BK08�������������������� 113 113 9-20BK08 619�������������������������������� 314 718-02�������������������������� 180 765-18.875����������������� 183 866�������������������������������� 315 314 718-02 619 180 765-18.875 183 866 315 7-50CH-12������������������ 116 116 718 113 9-20BK09�������������������� 113 315 9-20BK09 312 7-50CH-12 180 765-23.875 183 866ZN 620-01�������������������������� 312 718�������������������������������� 180 765-23.875����������������� 183 866ZN�������������������������� 315 620-01 7-50CH-4�������������������� 116 9-20BK09A����������������� 113 113 315 9-20BK09A 620-03�������������������������� 312 312 7-50CH-4 719-36.00�������������������� 180 180 765-24.875 765-24.875����������������� 183 183 867 867�������������������������������� 315 116 719-36.00 620-03 7-50CH-8�������������������� 116 312 7-50CH-8 9-20BK10�������������������� 113 113 315 9-20BK10 620-07�������������������������� 312 719-48.00�������������������� 180 180 765-29.875 765-29.875����������������� 183 183 868 868�������������������������������� 315 116 719-48.00 620-07 7-52CH-12������������������ 116 113 9-20BK11�������������������� 113 315 9-20BK11 312 7-52CH-12 177 765-9.875 183 869 620�������������������������������� 312 720LH-03�������������������� 177 765-9.875�������������������� 183 869�������������������������������� 315 116 720LH-03 620 7-52CH-4�������������������� 116 7-52CH-4 116 9-20BK12�������������������� 113 113 9-20BK12 620BK-01�������������������� 312 720LH�������������������������� 177 765�������������������������������� 183 870�������������������������������� 315 312 720LH 177 765 620BK-01 183 870 315 7-52CH-8�������������������� 116 113 9-20BK12A����������������� 113 325 9-20BK12A 312 7-52CH-8 177 76555 183 874CH 620BK-03�������������������� 312 720RH-03�������������������� 177 765SS��������������������������� 183 874CH�������������������������� 325 116 720RH-03 620BK-03 116 7-60CH-12������������������ 7-60CH-12 116 9-22BK01�������������������� 113 113 9-22BK01 620BK-07�������������������� 312 312 720RH�������������������������� 177 177 768-21.875 768-21.875����������������� 183 183 875BK 875BK��������������������������� 325 720RH 620BK-07 325 7-60CH-4�������������������� 116 312 7-60CH-4 9-22BK02�������������������� 113 113 325 9-22BK02 620BK��������������������������� 312 72248��������������������������� 177 177 768-27.875 768-27.875����������������� 183 183 87555 875SS��������������������������� 325 116 72248 620BK 7-60CH-8�������������������� 116 113 9-22BK04�������������������� 113 325 9-22BK04 312 7-60CH-8 177 768-30.06 183 875ZN 621-01�������������������������� 312 72248N������������������������ 177 768-30.06�������������������� 183 875ZN�������������������������� 325 621-01 116 72248N 7-62CH-12������������������ 116 7-62CH-12 116 9-22BK05�������������������� 113 113 9-22BK05 621-03�������������������������� 312 723�����������������������������������61 768-33.875����������������� 183 880-01�������������������������� 318 312 723 621-03 61 768-33.875 183 880-01 318 7-62CH-4�������������������� 116 116 724 113 9-22BK06�������������������� 113 318 9-22BK06 312 7-62CH-4 183 880 621-07�������������������������� 312 724�����������������������������������61 768-38.875����������������� 183 880�������������������������������� 318 621-07 61 768-38.875 116 7-62CH-8�������������������� 7-62CH-8 116 9-22BK07�������������������� 113 113 9-22BK07 621�������������������������������� 312 312 725�����������������������������������61 768-39.19�������������������� 183 183 88055 880SS��������������������������� 318 621 725 61 768-39.19 318 7-CH-12����������������������� 116 7-CH-12 116 9-22BK08�������������������� 113 113 9-22BK08 621P-01����������������������� 312 312 726�����������������������������������61 768-41.50�������������������� 183 183 88055-02 880SS-02��������������������� 318 621P-01 726 61 768-41.50 318 7-CH-4������������������������� 116 113 9-22BK09�������������������� 113 318 9-22BK09 621P-03����������������������� 312 312 7-CH-4 729-01�������������������������� 173 173 768-41.875 768-41.875����������������� 183 183 885-01 885-01�������������������������� 318 621P-03 116 729-01 7-CH-8������������������������� 116 9-22BK09A����������������� 113 113 317 9-22BK09A 621P-07����������������������� 312 312 7-CH-8 729-02�������������������������� 173 173 768-44.375 768-44.375����������������� 183 183 890BP 890BP��������������������������� 317 621P-07 116 729-02 700-01�������������������������� 187 9-22BK10�������������������� 113 113 317 9-22BK10 621P����������������������������� 312 312 700-01 729-03�������������������������� 173 173 768 768�������������������������������� 183 183 89055-01 890SS-01��������������������� 317 187 729-03 621P 700-02�������������������������� 187 9-22BK11�������������������� 113 113 317 9-22BK11 622-01�������������������������� 312 312 700-02 729-04�������������������������� 173 173 76855-01 768SS-01��������������������� 183 183 890ZN-01 890ZN-01������������������� 317 622-01 187 729-04 700-03�������������������������� 187 312 700-03 9-22BK12�������������������� 113 113 317 9-22BK12 622-03�������������������������� 312 729-10�������������������������� 174 174 76855 768SS��������������������������� 183 183 890ZN 890ZN�������������������������� 317 187 729-10 622-03 700�������������������������������� 187 187 729 9-22BK12A����������������� 113 113 317 9-22BK12A 622-07�������������������������� 312 312 700 729�������������������������������� 179 179 769 769�������������������������������� 183 183 891M 891M���������������������������� 317 622-07 701-01�������������������������� 187 903-01�����������������������������15 15 317 903-01 622�������������������������������� 312 312 701-01 730-01�������������������������� 172 7S2020 ������������������������ 220 891SS��������������������������� 317 622 172 752020 187 730-01 220 89155 701�������������������������������� 187 903�����������������������������������15 15 624BK��������������������������� 313 313 701 730-02�������������������������� 172 172 752021 7S2021 ����������������������� 220 220 891ZN 891ZN�������������������������� 317 624BK 317 903 187 730-02 701SS��������������������������� 187 9035SS-01���������������������14 14 317 903555-01 624G����������������������������� 313 313 70155 730-03�������������������������� 172 172 752025 7S2025������������������������� 220 220 895 895�������������������������������� 317 624G 187 730-03 702-01�������������������������� 186 702-01 186 9035SS-01W�����������������14 14 903555-01W 624W���������������������������� 313 313 730-04�������������������������� 172 172 752030 7S2030������������������������� 220 220 895M 895M���������������������������� 317 317 624W 730-04 702-05�������������������������� 101 702-05 101 9035SS-02���������������������14 14 903555-02 625�������������������������������� 311 311 730-10�������������������������� 174 174 752525 7S2525 ������������������������ 220 220 89555 895SS��������������������������� 317 317 625 730-10 702-06�������������������������� 101 9035SS-02W�����������������14 313 702-06 14 317 903555-02W 626BK��������������������������� 313 730-51�������������������������� 179 7S303003 ������������������� 220 898�������������������������������� 317 220 898 626BK 101 730-51 179 75303003 702-07�������������������������� 103 9035SS-04���������������������14 103 730 14 221 903555-04 626G����������������������������� 313 313 702-07 730�������������������������������� 179 179 753030 7S3030 ������������������������ 220 220 8A2020 8A2020������������������������ 221 626G 702-10�������������������������� 103 103 732 9036SS-01���������������������14 14 903655-01 626W���������������������������� 313 313 702-10 732�������������������������������� 174 174 7552021 7SS2021 ��������������������� 221 221 8A2025������������������������ 221 8A2025 221 626W 702�������������������������������� 186 702 9036SS-02���������������������14 186 14 903655-02 628BK��������������������������� 313 313 734�������������������������������� 172 172 7552025 7SS2025���������������������� 221 221 8A2525 8A2525������������������������ 221 734 221 628BK 703�������������������������������� 186 9036SS-04���������������������14 14 220 903655-04 628G����������������������������� 313 313 703 736-01�������������������������� 176 176 7552525 7SS2525 ��������������������� 221 221 8S1520SSP����������������� 220 628G 186 736-01 85152055P 704�������������������������������� 185 704 903BK-01�����������������������15 185 15 903BK-01 628W���������������������������� 313 736�������������������������������� 174 7SST2020 ������������������� 221 8S2030������������������������� 220 174 75512020 220 628W 313 736 221 852030 704-24.20�������������������� 185 903BK������������������������������15 185 737 15 220 903 BK 630BK��������������������������� 313 313 704-24.20 737�������������������������������� 172 172 8S2525������������������������� 220 630BK 852525 705�������������������������������� 185 185 738 903CH-01����������������������15 15 220 903CH-01 630G����������������������������� 313 313 705 738�������������������������������� 172 172 8S2525SP������������������� 220 630G 8525255P 8 8 705-01�������������������������� 185 903CH�����������������������������15 185 739 15 220 903CH 630W���������������������������� 313 313 705-01 739�������������������������������� 172 172 8S3030������������������������� 220 630W 853030 705-02�������������������������� 185 8-10BK-12������������������� 115 115 853535 185 740 903SS-01������������������������15 15 220 90355-01 639�������������������������������� 313 313 705-02 740�������������������������������� 172 172 8-10BK-12 8S3535������������������������� 220 639 705-05�������������������������� 185 8-10BK-4��������������������� 115 221 705-05 101 8-10BK-4 903SS������������������������������15 15 220 90355 6A1015������������������������ 221 743-27�������������������������� 101 8S4040������������������������� 220 185 743-27 6A1015 115 854040 705-06�������������������������� 185 8-10BK-8��������������������� 115 115 903ZN-01����������������������15 15 903ZN-01 6A1515������������������������ 221 221 705-06 743-43.3���������������������� 101 101 8-10BK-8 185 743-43.3 6A1515 To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
Index
6-13CH���������������������������62 6A2020 ����������������������� 221 185 743-47.25 743-47.25�������������������� 101 101 8-10CH-12 705-07�������������������������� 185 8-10CH-12������������������ 115 221 705-07 115 6-13CH 62 6A2020 6-13CHLK����������������������62 6A2025������������������������ 221 705-08�������������������������� 185 185 744-15.8 744-15.8���������������������� 101 101 8-10CH-4 8-10CH-4�������������������� 115 115 6-13CHLK 62 6A2025 221 705-08 115 6-13SST��������������������������62 6A2030������������������������ 221 705-09 ������������������������� 185 185 744-19.7 744-19.7���������������������� 101 101 8-10CH-8 8-10CH-8�������������������� 115 6-1355T 62 6A2030 221 705-09 115 221 185 101 115 6-13SSTLK���������������������62 6A2525������������������������ 705-10�������������������������� 744-23.6���������������������� 8-10TC-12������������������� 221 705-10 101 8-10TC-12 6-1355TLK 62 6A2525 185 744-23.6 115 6-13WT���������������������������63 6A2530������������������������ 221 705-11�������������������������� 185 185 744-27.6 744-27.6���������������������� 101 101 8-10TC-4 8-10TC-4��������������������� 115 221 705-11 6-13WT 63 6A2530 115 6-13WTCH751�������������63 6A3030������������������������ 221 705-12�������������������������� 185 185 744-31.5 744-31.5���������������������� 101 101 8-10TC-8 8-10TC-8��������������������� 115 6-13WTCH751 221 705-12 63 6A3030 115 600�������������������������������� 314 314 651515BP 6S1515BP������������������� 220 705-13�������������������������� 185 185 744-35.4 744-35.4���������������������� 101 101 8-12BK-12 8-12BK-12������������������� 115 600 220 705-13 115 600BK��������������������������� 314 314 65152001 6S152001�������������������� 220 705-14�������������������������� 185 185 744-39.4 744-39.4���������������������� 101 101 8-12BK-4 8-12BK-4��������������������� 115 220 705-14 600BK 311 ������������������ 220 185 101 115 60101��������������������������� 6S152002 705-15�������������������������� 744-43.3���������������������� 8-12BK-8��������������������� 311 220 185 101 115 60101 65152002 705-15 744-43.3 8-12BK-8 601�������������������������������� 310 310 6S1520BP 705-16�������������������������� 185 185 744A-15.8 744A-15.8������������������� 101 101 8-12CH-12������������������ 115 220 8-12CH-12 115 601 651520BP ������������������ 220 705-16 601SS01���������������������� 311 311 6S1520������������������������� 220 705-17�������������������������� 185 185 744A-19.7 744A-19.7������������������� 101 101 8-12CH-4�������������������� 115 220 705-17 8-12CH-4 115 6015501 651520 115 601SS03���������������������� 310 310 65152501 6S152501�������������������� 222 705-18�������������������������� 185 185 744A-23.6 744A-23.6������������������� 101 101 8-12CH-8 8-12CH-8�������������������� 115 222 705-18 6015503 601SS��������������������������� 310 310 6S1525BP������������������� 220 705-22�������������������������� 185 185 744A-27.6 744A-27.6������������������� 101 101 8-12TC-12������������������� 115 220 705-22 8-12TC-12 115 60155 651525BP 115 311 652020BP 185 744A-31.5 101 8-12TC-4 60201��������������������������� 311 6S2020BP������������������� 220 705-23�������������������������� 185 744A-31.5������������������� 101 8-12TC-4��������������������� 115 60201 220 705-23 115 60202��������������������������� 310 310 652025BP 6S2025BP������������������� 220 705-24�������������������������� 185 185 744A-35.4 744A-35.4������������������� 101 101 8-12TC-8 8-12TC-8��������������������� 115 220 705-24 60202 60202SS01����������������� 311 311 6S2525BP������������������� 220 705-25�������������������������� 185 185 744A-39.4 744A-39.4������������������� 101 101 8-14BK-12������������������� 115 8-14BK-12 115 602025501 652525BP 220 705-25 115 602�������������������������������� 310 310 6551515 6SS1515���������������������� 221 705-26�������������������������� 185 185 744A-43.3 744A-43.3������������������� 101 101 8-14BK-4 8-14BK-4��������������������� 115 221 705-26 602 115 602SS01���������������������� 311 311 6551520 6SS1520���������������������� 221 705-27�������������������������� 185 185 745-36.00 745-36.00�������������������� 180 180 8-14BK-8 8-14BK-8��������������������� 115 221 705-27 6025501 115 310 221 185 180 115 602SS��������������������������� 6SS2020���������������������� 705-28�������������������������� 745-48.00�������������������� 8-14CH-12������������������ 221 705-28 180 8-14CH-12 60255 310 6552020 185 745-48.00 115 603SS01���������������������� 311 311 6552025 6SS2025���������������������� 221 710�������������������������������� 186 186 746-43.3 746-43.3���������������������� 103 103 8-14CH-4 8-14CH-4�������������������� 115 221 710 6035501 115 603SS02���������������������� 311 311 6552030 6SS2030���������������������� 221 710A����������������������������� 186 186 747-43.3 747-43.3���������������������� 101 101 8-14CH-8 8-14CH-8�������������������� 115 221 710A 6035502 115 603SS��������������������������� 310 310 6552525 6SS2525���������������������� 221 710SS��������������������������� 186 186 748-23.6 748-23.6���������������������� 103 103 8-14TC-12 8-14TC-12������������������� 115 221 71055 60355
F m x
335 335
Index
SIERRA PACIFIC ENGINEERING AND PRODUCTS
336 336
903ZN�����������������������������15 15 903ZN..._ 904-01�����������������������������15 15 904-01 904�����������������������������������15 15 904 904BK-01�����������������������15 15 904BK-01 904BK������������������������������15 15 904BK 904CH-01����������������������15 15 904CH-01 904CH�����������������������������15 15 904CH 904SS-01������������������������15 15 90455-01 904SS������������������������������15 15 90455 904ZN-01����������������������15 904ZN-01 15 904ZN�����������������������������15 15 904ZN 905-01�����������������������������15 15 905-01 905�����������������������������������15 15 905 905BK-01�����������������������15 15 905BK-01 905BK������������������������������15 15 905BK 905CH-01����������������������15 15 905CH-01 15 905CH�����������������������������15 905CH. 905SS-01������������������������15 15 90555-01 905SS������������������������������15 15 90555 905ZN-01����������������������15 15 905ZN-01 905ZN�����������������������������15 15 905ZN 906-01�����������������������������15 15 906-01 15 906�����������������������������������15 906 906BK-01�����������������������15 15 906BK-01 906BK������������������������������15 15 906BK 906CH-01����������������������15 15 906CH-01 906CH�����������������������������15 15 906CH 906SS-01������������������������15 15 90655-01 906SS������������������������������15 15 90655 906ZN-01����������������������15 15 906ZN-01 906ZN�����������������������������15 15 906ZN 11 91-01�������������������������������11 91-01 91-02�������������������������������11 11 91-02 91-03�������������������������������11 11 91-03 91-03BK��������������������������11 11 91-03BK 91-09BK02���������������������10 10 91-09BK02 91-10BK02���������������������10 10 91-10BK02 91-11BK��������������������������10 91-11 BK 10 91-12BK��������������������������10 91-12BK 10 91-19BK02���������������������10 10 91-19BK02 91-20BK02���������������������10 10 91-20BK02 91-21BK��������������������������10 91-21 BK 10 91-22BK��������������������������10 91-22BK 10 911ZN�����������������������������17 911ZN 17 914�����������������������������������17 914 17 915�����������������������������������17 17 915 917�����������������������������������18 917 18 917SS������������������������������18 18 91755 92-01��������������������������������� 99 92-01 92-02��������������������������������� 99 92-02 9 92-03��������������������������������� 9 92-03 9 92-04��������������������������������� 9 92-04 17 920-01�����������������������������17 920-01 920-02�����������������������������17 17 920-02 920-04�����������������������������17 17 920-04 17 920�����������������������������������17 920 17 921-01�����������������������������17 921-01 17 921�����������������������������������17 921 17 922�����������������������������������17 922 17 924�����������������������������������17 924 928BK������������������������������18 18 928BK 9 9 93-01��������������������������������� 93-01 9 93-02��������������������������������� 93-02 9 930�����������������������������������24 24 930 932�����������������������������������24 24 932 933�����������������������������������13 13 933 934�����������������������������������24 24 934 935-01�����������������������������13 13 935-01 935-02�����������������������������13 13 935-02 935-03�����������������������������13 13 935-03 935-04�����������������������������13 13 935-04 935-05�����������������������������13 13 935-05 935-06�����������������������������13 13 935-06 935-07�����������������������������13 13 935-07 936�����������������������������������24 24 936
14 939-01 939-01 ����������������������������14 14 939�����������������������������������14 939 94-01�������������������������������10 10 94-01 94-02�������������������������������10 94-02 10 11 94-03�������������������������������11 94-03 14 940�����������������������������������14 940 14 941 941 ����������������������������������14 14 942�����������������������������������14 942 14 944�����������������������������������14 944 945�����������������������������������15 15 945 14 946�����������������������������������14 946 14 948�����������������������������������14 948 94BK-01��������������������������10 10 94BK-01 94BK-02��������������������������10 10 94BK-02 11 94BK-03��������������������������11 94BK-03 950�����������������������������������23 23 950 14 951�����������������������������������14 951 14 952�����������������������������������14 952 14 953�����������������������������������14 953 14 954-01 954-01 ����������������������������14 242 242 95P�������������������������������� 95P 242 242 95SS������������������������������ 9555 16 960�����������������������������������16 960 16 960BK������������������������������16 960BK 20 963P��������������������������������20 963P 20 964P-01��������������������������20 964P-01 20 964P��������������������������������20 964P 16 966BK-01�����������������������16 966BK-01 966BK-02�����������������������16 16 966BK-02 16 966BK������������������������������16 966BK 16 967BK-01�����������������������16 967BK-01 967BK-02�����������������������16 16 967BK-02 967BK-03�����������������������16 16 967BK-03 967BK-04�����������������������16 967BK-04 16 967BK������������������������������16 967BK 16 22 968-01�����������������������������22 968-01 22 968-02�����������������������������22 968-02 22 968�����������������������������������22 968 969�����������������������������������19 19 969 975�����������������������������������16 16 975 976�����������������������������������13 13 976 21 982BK������������������������������21 982BK 21 982G��������������������������������21 982G 21 982W�������������������������������21 982W 18 983�����������������������������������18 983 18 983DC�����������������������������18 983DC 18 983SS-01������������������������18 98355-01 18 983SS������������������������������18 98355 21 985�����������������������������������21 985 21 985BK������������������������������21 985BK 21 987A��������������������������������21 987A 21 987CH�����������������������������21 987CH 21 987SS������������������������������21 98755 18 988CH�����������������������������18 988CH 19 989BK-02�����������������������19 989BK-02 19 989BK10�������������������������19 989BK10 19 989BK������������������������������19 989BK 320 9901SS������������������������� 320 990155 320 9901ZN������������������������ 9901ZN 320 320 9902SS������������������������� 320 990255 320 9902ZN������������������������ 9902ZN 320 320 9903SS������������������������� 990355 320 320 9903ZN������������������������ 320 9903ZN 320 9904SS������������������������� 320 990455 320 9904ZN������������������������ 9904ZN 320 320 9905ZN������������������������ 320 9905ZN 19 990BK������������������������������19 990BK. 12 9910���������������������������������12 9910 12 9910BK���������������������������12 9910BK 12 9911���������������������������������12 9911 12 9911BK���������������������������12 9911BK 12 9912���������������������������������12 9912 12 9912BK���������������������������12 9912BK 12 9913���������������������������������12 9913 12 9913BK���������������������������12 9913BK
www.spep.com Download @www.spep.com Download =, JDMODELS @
12 9914���������������������������������12 9914 12 9914BK���������������������������12 9914BK 12 9915���������������������������������12 9915 12 9915BK���������������������������12 9915BK 12 9916���������������������������������12 9916 12 9916BK���������������������������12 9916BK 12 9917���������������������������������12 9917 12 9917BK���������������������������12 9917BK 991CH-01����������������������22 991CH-01..._22 22 991CH-02����������������������22 991CH-02 22 991CH�����������������������������22 991CH 22 992CH�����������������������������22 992CH 21 995A��������������������������������21 995A 21 996A��������������������������������21 996A 13 997-01�����������������������������13 997-01 13 997-02�����������������������������13 997-02 997�����������������������������������13 997 13 21 997A��������������������������������21 997A 997BK-01�����������������������13 13 997BK-01 13 997BK-02�����������������������13 997BK-02 13 997BK������������������������������13 997BK 21 998A��������������������������������21 998A 221 221 9A2030������������������������ 9A2030 221 221 9A2530������������������������ 9A2530 221 221 9A2535������������������������ 9A2535 221 9A3030 9A3030 ����������������������� 221 221 221 9A3035������������������������ 9A3035 221 221 9A3535������������������������ 9A3535 220 9S1919 951919 ����������������������� 220 220 9S2030 952030 ������������������������ 220 220 220 9S2530������������������������� 952530 220 9S303002 95303002 ������������������ 220 220 9S3030 ����������������������� 220 953030 220 9S3535 ����������������������� 220 953535 220 9SS1919 9551919 �������������������� 220 221 9SS2030 9552030 ��������������������� 221 221 221 9SS2530���������������������� 9552530 221 9SS303002 955303002 ���������������� 221 221 9SS3030 9553030 �������������������� 221 221 9SS3035 9553035 ��������������������� 221 221 9SS3535 9553535 �������������������� 221 221 9SST2030�������������������� 955-12030— ........ ...... 221 221 9SST3030 ������������������� 221 9SST3030
A A A12022������������������������ 209 A12022 209 A1202296������������������� 209 209 A1202296 A13022������������������������ 209 A13022 209 A1302296������������������� 209 209 A1302296 209 A13032������������������������ 209 A13032 A14022������������������������ 209 A14022 209 A1402296������������������� 209 A1402296 209 A14032������������������������ 209 A14032 209 A15032������������������������ 209 209 A15032 A20764 ���������������������� 209 209 A20764 A21064 ���������������������� 209 A21064 209 209 A30765 ����������������������� 209 A30765 209 A31065 ����������������������� 209 A31065 A31165 ����������������������� 209 209 A31165 A31265 ����������������������� 209 209 A31265 A31565 ����������������������� 209 209 A31565 A410-72���������������������� 210 A410-72 210 A41084 ����������������������� 209 A41084 209 A41095������������������������ 209 209 A41095 A4109596������������������� 209 209 A4109596 210 A412-72���������������������� 210 A412-72 A41284 ����������������������� 209 209 A41284 A41295������������������������ 209 A41295 209 A415-72���������������������� 210 210 A415-72 A41584 ����������������������� 209 209 A41584 A41595������������������������ 209 209 A41595 209 A4159596������������������� 209 A4159596 A42095������������������������ 209 209 A42095 209 A51015������������������������ 209 A51015
209 A51215 A51215 ����������������������� 209 209 A51515������������������������ 209 A51515 A5151596������������������� 209 209 A5151596 209 A52015������������������������ 209 A52015 A52515 ����������������������� 209 209 A52515 209 A53015������������������������ 209 A53015 209 A53515 ����������������������� 209 A53515 209 A54015 ����������������������� 209 A54015 209 A61015������������������������ 209 A61015. 209 A61211������������������������ A61211 209 209 A61215������������������������ A61215 209 210 A615-36���������������������� 210 A615-36 210 A615-72���������������������� 210 A615-72 209 A61511������������������������ 209 A61511 209 A61515������������������������ 209 A61515 209 A6151596������������������� 209 A6151596 210 A620-48���������������������� 210 A620-48 210 210 A620-72���������������������� A620-72 209 A62011������������������������ A62011 209 209 A62015������������������������ 209 A62015 A6201596������������������� 209 209 A6201596 209 A62511������������������������ 209 A62511 209 A62515������������������������ 209 A62515 210 A630-72���������������������� 210 A630-72 209 A63011������������������������ 209 A63011 209 A63015������������������������ 209 A63015. A63511 A63511 ����������������������� 209 209 209 A64011������������������������ A64011 209 A71515 ����������������������� 209 A71515 209 209 A71521 ����������������������� 209 A71521 209 A72015������������������������ 209 A72015 209 A72021������������������������ 209 A72021 213 A72221-01������������������ 213 A72221-01 209 A72515������������������������ A72515. 209 209 A72521 A72521 ����������������������� 209 209 A73015������������������������ 209 A73015 209 A73021 A73021 ����������������������� 209 A73515 ����������������������� 209 209 A73515 209 A74015������������������������ 209 A74015 209 A74021 ����������������������� 209 A74021 209 A92021������������������������ 209 A92021 209 A92521������������������������ 209 A92521 209 A93021������������������������ A93021 209 209 A9302196������������������� 209 A9302196 209 A93521 ����������������������� 209 A93521 A94021������������������������ 209 A94021 209 209 A94521 ����������������������� 209 A94521 209 A95021 ����������������������� 209 A95021
B B BH0004 222 BH0004 ����������������������� 222 222 BH0005������������������������ 222 BH0005 222 BH0050������������������������ 222 BH0050 222 BH0055������������������������ 222 BH0055 222 222 BH0060������������������������ BH0060 222 BH0065������������������������ 222 BH0065 222 BH0070 ����������������������� 222 BH0070 222 BH0075������������������������ 222 BH0075. BH0080 ����������������������� 222 222 BH0080 222 BH0085 BH0085 ����������������������� 222 214 214 BH5015������������������������ BH5015 214 BH5015SS������������������� 214 BH5015SS 214 BH502001������������������� 214 BH502001 214 BH5020������������������������ 214 BH5020 214 BH5021SS������������������� 214 BH5021SS 214 BH5021 ��������������������� 214 BH5021 214 BH5022������������������������ 214 BH5022. 214 BH5022SS01�������������� 214 BH50225501 214 BH5022SS������������������� 214 BH502255 214 214 BH5022ZN01������������� BH5022ZN01 214 BH5023������������������������ 214 BH5023 214 BH5023SS01�������������� 214 BH5023SSO1 214 BH5023SS������������������� 214 BH5023SS 214 BH5023ZN01 ����������� 214 BH5023ZNO1
214 BH5024������������������������ 214 BH5024 214 214 BH5024SS01�������������� BH5024SSO1 214 BH5024SS������������������� 214 BH5024SS 214 BH5024ZN01������������� 214 BH5024ZNO1 214 BH5025������������������������ 214 BH5025 214 BH5025SS01�������������� 214 BH50255501 214 BH5025SS������������������� 214 BH5025SS 214 BH5025ZN01������������� 214 BH5025ZNO1 214 BH5027������������������������ 214 BH5027 214 214 BH5027SS01�������������� BH5027SSO1 214 BH5027SS������������������� 214 BH5027SS 214 BH5027ZN01������������� 214 BH5027ZNO1 214 BH5028������������������������ 214 BH5028 214 BH5028SS01�������������� 214 BH50285501 214 BH5028SS������������������� 214 BH5028SS 214 BH5028ZN01������������� 214 BH5028ZNO1 214 BH5030������������������������ 214 BH5030 214 BH5030SS01�������������� 214 BH5030SSO1 214 214 BH5031SS������������������� BH5031SS 214 BH5033������������������������ 214 BH5033 214 BH5034SS01�������������� 214 BH5034SSO1 214 BH5034ZN01������������� 214 BH5034ZNO1 214 BH5035SS01�������������� 214 BH5035SSO1 214 BH5035ZN01������������� 214 BH5035ZNO1 214 BH5085������������������������ 214 BH5085 214 BH5087������������������������ 214 BH5087 214 214 BH5087ZN������������������ BH5087ZN 214 214 BH5089SS-01������������ BH508955-01 214 BH5089SS������������������� 214 BH5089SS 214 BH5090������������������������ 214 BH5090 216 BH5095������������������������ 216 BH5095 BH7005BP������������������ 223 BH7005BP 223 223 BH7005ZN������������������ 223 BH7005ZN BH7010BP������������������ 223 BH7010BP 223 223 223 BH7010ZN������������������ BH7010ZN 223 223 BH7015BP������������������ BH7015BP 223 BH7015ZN������������������ 223 BH7015ZN 223 BH7020BP������������������ 223 BH7020BP BH7020ZN������������������ 223 BH7020ZN 223 223 BH7025BP������������������ 223 BH7025BP 223 BH7025ZN������������������ 223 BH7025ZN 223 BH7030 ����������������������� 223 BH7030 BH8150NH ���������������� 249 BH8150NH 249 249 BH8150������������������������ 249 BH8150 BH8152NH����������������� 249 BH8152NH 249 249 BH8152������������������������ 249 BH8152 249 BH8154������������������������ 249 BH8154 249 BH8154NH����������������� 249 BH8154NH 249 BH8160������������������������ 249 BH8160 249 BH8160NH����������������� 249 BH8160NH BH8162NH����������������� 249 BH8162NH 249 249 249 BH8162������������������������ BH8162 249 BH8164NH����������������� 249 BH8164NH 249 BH8164������������������������ 249 BH8164 211 BPSL41094����������������� 211 BPSL41094 211 BPSL41294����������������� 211 BPSL41294 211 BPSL41295����������������� 211 BPSL41295 211 BPSL41594����������������� 211 BPSL41594 211 BPSL41595����������������� 211 BPSL41595 211 211 BPSL41596����������������� BPSL41596 211 211 BPSL42094����������������� BPSL42094 211 BPSL42095����������������� 211 BP5L42095 211 BPSL42096����������������� 211 BPSL42096
C c C11�����������������������������������94 C11 94 C12�����������������������������������94 94 C12 226 CH61820��������������������� CH61820 226 226 CH71808��������������������� 226 CH71808 226 226 CH71808A������������������ CH71808A CH71808SS���������������� 226 CH7180855 226 226 CH92612��������������������� 226 CH92612 226 CH92612A������������������ 226 CH92612A CH92612SS���������������� 226 CH9261255 226
226 CH92612ZN CH92612ZN���������������. 226 212 CS1050������������������������ 212 CS1050 272 CT001��������������������������� 272 CT001 272 272 CT001BK��������������������� CT001 BK 272 CT002��������������������������� 272 CT002 272 CT002BK��������������������� 272 CTOO2BK 272 CT003��������������������������� 272 CT003 272 272 CT003BK��������������������� CT003 BK 272 CT004��������������������������� 272 CT004 272 272 CT004BK��������������������� CTOO4BK 272 CT005��������������������������� 272 CT005 272 272 CT005BK��������������������� CT005 BK 272 CT006��������������������������� 272 CT006 272 CT006BK��������������������� 272 CTOO6BK 272 CT010��������������������������� 272 CT010 272 CT010BK��������������������� 272 CTO1OBK 272 CT020��������������������������� 272 CT020 272 CT020BK��������������������� 272 CTO2OBK 272 272 CT030��������������������������� CT030 272 CT030BK��������������������� 272 CTO30BK 272 CT040��������������������������� 272 CT040 272 CT040BK��������������������� 272 CTO4OBK 272 CT050��������������������������� 272 CT050 272 CT050BK��������������������� 272 CTO5OBK 272 CT060��������������������������� 272 CT060 272 CT060BK��������������������� 272 CTO6OBK 272 CT070��������������������������� 272 CT070 272 CT070BK��������������������� 272 CTO7OBK 272 CT080��������������������������� 272 CT080 272 CT080BK��������������������� 272 CTO8OBK 272 CT090��������������������������� 272 CT090 272 CT090BK��������������������� 272 CTO9OBK 272 CT095��������������������������� 272 CT095 272 CT095BK��������������������� 272 CT095BK 272 CT101��������������������������� 272 CT101 272 CT101BK��������������������� 272 CT101BK 272 CT102��������������������������� 272 CT102 272 CT102BK��������������������� 272 CT102BK 272 CT103��������������������������� 272 CT103 272 CT103BK��������������������� 272 CT103BK 272 CT104��������������������������� 272 CT104 272 CT104BK��������������������� 272 CT104BK 272 CT105��������������������������� 272 CT105 272 CT105BK��������������������� 272 CT105BK 272 CT106��������������������������� 272 CT106 272 CT106BK��������������������� 272 CT106BK 272 CT110��������������������������� 272 CT110 272 CT110BK��������������������� 272 CT110BK 272 CT120��������������������������� 272 CT120 272 CT120BK��������������������� 272 CT120BK 272 CT130��������������������������� 272 CT130... 272 272 CT130BK��������������������� CT130BK 272 CT140��������������������������� 272 CT140 272 CT140BK��������������������� 272 CT140BK 272 CT150��������������������������� 272 CT150 272 CT150BK��������������������� 272 CT150BK 272 CT160��������������������������� 272 CT160 272 CT160BK��������������������� 272 CT160BK 272 CT170��������������������������� 272 CT170... 272 272 CT170BK��������������������� CT170BK 272 CT180��������������������������� 272 CT180 272 CT180BK��������������������� 272 CT180BK 272 CT190��������������������������� 272 CT190 272 CT190BK��������������������� 272 CT190BK 272 CT195��������������������������� 272 CT195 272 CT195BK��������������������� 272 CT195BK 273 CT501��������������������������� 273 CT501... 273 CT501BK��������������������� 273 CT501BK 273 CT502��������������������������� 273 CT502 273 CT502BK��������������������� 273 CT5026K 273 CT503��������������������������� 273 CT503 273 273 CT503BK��������������������� CT503 BK 273 CT504��������������������������� 273 CT504 273 CT504BK��������������������� 273 CT504BK 273 CT505��������������������������� 273 CT505
Hinges and Industrial Hardware
awmparm posnpui pun sabullq
H2269BK-01�������������� 237 H2269BK��������������������� 237 H2270BK��������������������� 240 H2271SS-01��������������� 229 H2271SS-02��������������� 229 H2273BK��������������������� 256 H2275BK��������������������� 236 H2276BK��������������������� 242 H2277BK��������������������� 241 H2278CH�������������������� 257 H2279BK-01�������������� 235 H2279BK��������������������� 235 H2280BK��������������������� 236 H2281SS��������������������� 234 H2282BK-01�������������� 236 H2282BK��������������������� 236 H2283-01�������������������� 227 H2283�������������������������� 227 H2284WTP����������������� 270 H2285SS��������������������� 229 H3-01��������������������������� 288 H3-01A������������������������ 288 H3-01SS���������������������� 288 H3-03��������������������������� 285 H3-03A������������������������ 285 H3-03SS���������������������� 285 H308000��������������������� 288 H308000A������������������ 288 H308000SS���������������� 288 H308001��������������������� 288 H308001A������������������ 288 H308001SS-01���������� 288 H308001SS���������������� 288 H308003��������������������� 287 H308003A������������������ 287 H308003SS���������������� 287 H308004��������������������� 285 H308004A������������������ 285 H308004SS���������������� 285 H308005��������������������� 286 H308005A������������������ 286 H308005SS���������������� 286 H312000��������������������� 288 H312000A������������������ 288 H312000SS���������������� 288 H312001��������������������� 289 H312001A������������������ 289 H312001SS-01���������� 289 H312001SS���������������� 289 H312002��������������������� 289 H312003-01��������������� 287 H312003��������������������� 287 H312003A������������������ 287 H312003SS-01���������� 287 H312003SS���������������� 287 H312004��������������������� 285 H312004A������������������ 285 H312004SS���������������� 285 H312005-01��������������� 286 H312005��������������������� 286 H312005A������������������ 286 H312005SS���������������� 286 H314000��������������������� 288 H314000A������������������ 288 H314000SS���������������� 288 H314001��������������������� 289 H314001A������������������ 289 H314001SS���������������� 289 H314003��������������������� 287 H314003A������������������ 287 H314003SS���������������� 287 H314004��������������������� 285 H314004A������������������ 285 H314004SS���������������� 285 H314005��������������������� 286
LLZ 05dN900LH3 L9ZZH EEZ 500VLEH LVZ 98Z ZO-080ZH LLZ dN9001HJ ZVZ SS99ZZH 8EZ SSVOOVLEH OEZ 917174 58Z 6LOZH IMO5OHJ Va N959ZZH EEZ OV170 VVOOVLEH VVZ 58Z EL 8LOZH N805OH3 VLZ 179ZZH 9VZ VOOVLEH tVZ AA9EVO 58Z LLOZH L6L HML3D VLZ SSOSLOHJ 9L M-HDE9ZZH 8ZZ 10-M9EVCI SSEOOVLEH EVZ 9L L8Z 1 HM 13D 9LOZH L6 L SSSZ 1 OHJ Va 1-HDE9ZZH 8ZZ N99E174 VE0OVLEH EVZ LK H1139 Va ZO-9LOZH L6L SSOLOHJ 9L Z9ZZFI £0017 L EH EVZ LO-Ne9E174 L8Z LO-9LOZH L6L L H1 L3D Va 8ZZ'" 1M90OHJ 9L HD L9ZZH LVZ 17£174 SS L 0017 1 EH VVZ 68Z EL 510E9D SLOTH Z 1 Z N9900H3 Va L 0-SSORZH 9VZ V10017 1 EH EVZ 50-81174 68Z VLOZH Z 1 Z 5 1 OZ9D Va 1M500HJ 6L 09ZZH 9VZ LOOVLEH ZVZ £0-8 MO 68Z 6L 515199 50-VLOZH ZLZ N9500H1 Va 10-09ZZH 917Z 10-81174 SSOOOVLEH EVZ 6L 88Z 560Z179 170-VLOZH ZLZ SS65ZZH 9VZ 91174 VOOOVLEH KZ 9L 88Z d 5651179 £0-17LOZH ZLZ 10-SS65ZZH 9VZ 00017LEH VEZ 51170 8L 88Z Z0-VLOZH 9 N985ZZH 9VZ SS500ZLEH VVZ LO-5L170 S1Z3 8L 98Z 6ZE LO-VLOZH N9L5ZZH ZEZ LLVO V500ZLEH SEZ ZVZ3 17L 98Z 6ZE 170-SSELOZH M0170E613 6ZE 10-N9L5ZZH ZEZ 500Z1EH SEZ H90117O LL 6£Z3 98Z E0-SSELOZH 8VZ 10170E613 6ZE N995ZZH ZEZ LO-500ZLEH SEZ LL AA6OVO 9£Z3 98Z ELOZH 8VZ HOE0E613 6ZE ZO-N955ZZH ZEZ SSVOOZLEH LVZ LL EEZ3 11960V0 58Z VO-ELOZH fitZ 10£0£613 6ZE 10-M955ZZH ZEZ VVOOZLEH 1tZ M80170 NZ0EZ3 9L 58Z £0-ELOZH 8VZ HOEOZ613 6ZE HDVSZZH EEZ VOOZLEH OVZ 980174 ISS0EZ3 9L 58Z Z0-ELOZH 8VZ 10£0Z613 6ZE £0-N9E5ZZH ZEZ WOK] SSEOOZLEH 6EZ SSOEZ3 9L L8Z LO-ELOZH 8VZ H5Z0Z61j 6ZE Z0-N9E5ZZH ZEZ 9L0170 L8Z 10-SSE0OZLEH 6EZ OEZ3 9L ZLOZH 8172 15Z0Z613 6ZE WASESZZH ZEZ 90170 VEOOZLEH 6EZ NZLZZ3 8L L8Z LO-ZLOZH 8VZ MOVOELN 6ZE NSZSZZH 9VZ £00ZLEH LSZ LL AASOVO LZZ3 L8Z LLOZH 8VZ 10V0EL13 6ZE N8L5ZZH 9VZ' LK" LO-E0OZLEH OVZ N950V0 NZ1ZZ3 LL LO-LLOZH 8VZ MOEOZLN 6ZE HDOSZZH SVZ VOVO ZOOZLEH OVZ ISSVZZ3 8L 68Z HHOLOZH 8VZ 10EOZL13 6ZE N905ZZH SVZ SSLOOZLEH OVZ EOVO SS1ZZ3 9L 68Z H1OLOZH 8VZ HSZOZLN 6ZE N961ZZH 8ZZ ZOVO 68Z LO-SSLOOZLEH 17bZ 17ZZ3 SL 590ZH 8VZ N9817ZZH 8ZZ VLOOZLEH SVZ LOVO NZLZZ3 SL 68Z 10-590ZH 8VZ --- iszum 6ZE HOZ51L1I 6ZE N9LVZZH 8ZZ LOOZLEH 8EZ AAOOVO ISSIZZ3 LL 68Z NZ179OZH 8VZ 10Z51L1I 6ZE £0-HD91ZZH 8ZZ 10-AA0O174 SSOOOZLEH 1tZ SS1ZZ3 LL 88Z SS179OZH 8VZ L010E1LL1d 6ZE ZO-HD9VZZH 9LZ VOOOZLEH LVZ LL N900174 1ZZ3 88Z NZZ9OZH 61Z MOEOZ913 6ZE 10-HD91ZZH 91Z 000Z1EH 1tZ 10-N900170 88Z NZ81Z3 LL NZO9OZH 8VZ 10£0Z913 6ZE £0-N991ZZH ZOZ SS50080EH 1tZ 17L ZO-S56£0 8123 98Z NZ6EOZH 8VZ MSZOZ91j 6ZE ZO-N99VZZH 08Z V50080EH LtZ 10-556£0 NZS1Z3 VL 98Z SEOZH 8VZ 15Z0Z9N 6ZE LVZ ''''''" --L0-',N99VZZH 08Z N956E0 50080EH 1SS5L23 VL 98Z LO-SEOZH 8VZ HOZONN 6ZE NSVZZH LZZ SS170080EH 05Z VL SS5LZ3 ZO-N956£0 58Z SS8LOZH 8VZ 10Z0Z91I 6ZE NVVZZH OEZ V170080EH 05Z 10-',1956£0 51Z3 VL 58Z 500ZH 8VZ SSOZLON 6ZE NEVZZH EVZ 170080EH 05Z N8176E4 NZZLZ3 SL 58Z LO-1700ZH 6tZ HOZ51911 6ZE NZVZZH EVZ SSE0080EH 05Z ZLZ3 SL ZO-N9V6E0 L8Z SSEOOZH 8VZ 102519N 6ZE £0-SS1VZZH LLZ 10-A9V6E0 VE0080EH LEZ NZ60Z3 SL L8Z 1AA0011H 8VZ HOZZ1911 6ZE ZO-SSLVZZH LLZ £0080EH LEZ ISS60Z3 SL N9E6E0 L8Z N900LLH 8VZ 10ZZ1913 6ZE LO-SSLVZZH V8Z LEZ SSLOONEH SS60Z3 5L--- ''''''''---DYN9E6E0 88Z' NZO6OLH 8VZ 1151019N 6ZE EEZZH 1782 88Z 10-SS10080EH LEZ 6023 SL 10-N9E6E0 V0601H 8VZ 151019N 6ZE Z0-dZEZZH Z8Z V10080EH OLZ NZ90Z3 17L Z0-SZ6E0 88Z H19801H 8VZ HOEOZVN 6ZE LO-dZEZZH 68Z 10-SZ6E0 L0080EH OLZ 88Z ISS90Z3 17L NZE8OLH 8VZ 10EOZ17I1 6ZE dLEZZH 68Z SS00080EH OLZ SS90Z3 17L N9Z6E0 88Z NZZ8OLH 8VZ MSZSLVN 6ZE dOEZZH 8LZ V00080EH 69Z Z0-N9Z6E0 9023 17L 88Z SS1801H 8VZ 1525117N 6ZE d6ZZZH 8LZ 00080EH 69Z 10-A9Z6E0 NZE0Z3 17L 88Z E17OLH 8VZ HOZSLVN 6ZE 96LZZH 61Z SSEO-EH LEZ 88E0 ISSEOZ3 6LE 58Z NZ6EOLH 8172 10Z511711 6ZE N961ZZH 6tZ VEO-EH LEZ SSE0Z3 61E 10-88£0 58Z SS6EOLH 8VZ HOZZLVN 6ZE LLZZH 6tZ L8E0 £0-EH OLZ E0Z3 61E 58Z 6E01H 8VZ 10ZZ117N 8ZE 9LZZH L8Z 6LE4 SSLO-EH 8EZ 51713 SZE 88Z ZO-SSVEOLH 8VZ SVZ --- ''''''''--uovovzir3 SS660ZH OEZ VLO-EH 05£0 88Z ZVL3 ZZ 8ZE LO-SSVEOLH L8Z 10170VZ1N 8ZE dN660ZH 6LZ 10-EH OEZ 9ZE0 6E13 601 88Z HHZEOLH 8VZ MOVOEZLN 8ZE N9660ZH 6LZ SS58ZZH OEZ SZEO 9E13 601 6ZZ 01-HMZEOLH 8VZ 10170EZL11 8ZE d1AN178ZZH VEZ SSOOZO EE13 8LE OLZ SS560ZH 6LZ' EO-HHZEOLH 8VZ d1AA00ZH1 8ZE 560ZH 6LZ 00Z0 £8ZZH KZ SSOE13 81£ LZZ Z0-HHZEOLH LLZ 05dN900ZH1 8ZE £60ZH 6LZ LZLO 10-£8ZZH LZZ LZ13 81E LZZ 10-HMZEOLH LLZ 0900ZH1 8ZE 680ZH 6LZ N8Z8ZZH SVZ 9EZ SS1Z13 H1ZEOLH LLZ a LLZ --- ''''''' --dIAA05143 1O-680ZH SVZ 17213 9EZ'-- ''''''" 10-N9Z8ZZH 8ZE OL-H1ZEOLH 6LZ dN905 1 HA RE 980ZH 6LZ SSL8ZZH LVZ SS 1 Z13 KZ £0-H1ZEO 1 H La N90951) 0 1 (INNS 1 HJ RE SS580ZH 6LZ N908ZZH 9ZZ 1Z13 Ea KZ Z0-H1ZEO L H la 0951) EO-Vb 1 HJ RE LO-SS580ZH 6a N96LZZH 9ZZ 8 L 13 ELZ SEZ L0-H1ZEO LH SLZ N90551D ZO-Vb 1 HA RE 580ZH 08Z 10-N96LZZH 9ZZ SEZ SS5 L L3 ELZ LZO LH SLZ OSSID 10-17V1H1 RE 10-580ZH 08Z HD8LZZH 9ZZ 5113 ELZ LSZ 10-1Z0 LH SLZ N9017SID VO-VE 1 HJ RE Z8OZH 08Z NOLLZZH ZEZ Z113 ELZ LVZ OM L H SLZ 0175.13 £O-VE 1 Hd RE N99LZZH EEZ ' -"" ZO-DS1.80ZH 08Z' ZVZ SS6013 Ea 8101H SLZ MEM Z 04£ 1 HA RE DS L8OZH 08Z N95LZZH EEZ 6013 ELZ 9EZ LLOLH SLZ 0£519 10-17E 1H1 RE Z0-HD L8OZH NSELZZH EEZ SS90 L3 ELZ 95Z SLOTH SLZ L 8Z N9OZ SID 17O-ZZ 1 EH RE HD L8OZH 6ZZ ZO-SS LLZZH EEZ 9013 ELZ 6ZZ 600 LH SLZ OZSID E0-ZZ1H1 8ZE L8OZH 6ZZ 10-SS 1 LZZH EEZ SSE013 ELZ ' 6ZZ 8001H SLZ N90151) Z 0-ZZ 1 HA RE Z0- L8OZH 6ZZ NSOLZZH EEZ £013 ELZ On Z08001H SLZ 0151D ELZ LO-ZZ LHJ SLZ Z0-SSO80ZH N969ZZH EEZ LEZ N85051.3 3 ELZ d1AA00 L Hd La H 080ZH 10-N969ZZH EEZ LEZ°
FH005BK��������������������� 274 FH005WT�������������������� 274 FH006BK��������������������� 274 FH006WT�������������������� 274 FH010SS��������������������� 274 FH0125SS������������������� 274 FH0150SS������������������� 274 FH050BK��������������������� 274 FH050WT�������������������� 274 FH100BKP������������������ 271 FH100BKP50������������� 271
G41595������������������������ 212 G42095������������������������ 212 G61515������������������������ 212 G62015������������������������ 212 G63015������������������������ 212 GE1LH1����������������������� 197 GE1LH�������������������������� 197 GE1RH1����������������������� 197 GE1RH������������������������� 197
H100802��������������������� 229 H1008�������������������������� 229 H1009�������������������������� 229 H1015�������������������������� 281 H1017�������������������������� 280 H1018�������������������������� 280 H1020�������������������������� 280 H1021-01�������������������� 280 H1021�������������������������� 280 H1032LH-01�������������� 279 H1032LH-02�������������� 279 H1032LH-03�������������� 279 H1032LH-10�������������� 279 H1032LH��������������������� 279 H1032RH-01�������������� 279 H1032RH-02�������������� 279 H1032RH-03�������������� 279 H1032RH-10�������������� 279 H1032RH�������������������� 279 H1034SS-01��������������� 281 H1034SS-02��������������� 281 H1039�������������������������� 249 H1039SS��������������������� 249 H1039ZN�������������������� 249 H1043�������������������������� 278 H1081SS��������������������� 278 H1082ZN�������������������� 289 H1083ZN�������������������� 289 H1086LH��������������������� 282 H1090A����������������������� 284 H1090ZN�������������������� 284 H1100BK��������������������� 271 H1100WT������������������� 271 H2003SS��������������������� 243 H2004-01�������������������� 243 H2005�������������������������� 230 H2018SS��������������������� 227 H2035-01�������������������� 280 H2035�������������������������� 280 H2039ZN�������������������� 202 H2060ZN�������������������� 216 H2062ZN�������������������� 216 H2064SS��������������������� 228 H2064ZN�������������������� 228 H2065-01�������������������� 228 H2065�������������������������� 228 H2070LH��������������������� 245 H2070RH�������������������� 245 H2071-01�������������������� 246 H2071�������������������������� 246 H2072-01�������������������� 232 H2072�������������������������� 232 H2073-01�������������������� 232 H2073-02�������������������� 233 H2073-03�������������������� 232 H2073-04�������������������� 232 H2073�������������������������� 232 H2073SS-03��������������� 232 H2073SS-04��������������� 232 H2074-01�������������������� 246 H2074-02�������������������� 246 H2074-03�������������������� 246 H2074-04�������������������� 246 H2074-05�������������������� 246 H2074�������������������������� 246 H2075�������������������������� 247 H2076-01�������������������� 228 H2076-02�������������������� 228 H2076�������������������������� 228 H2077�������������������������� 246 H2078�������������������������� 233 H2079�������������������������� 238 H2080-02�������������������� 233
H2080�������������������������� 233 H2080SS-02��������������� 233 H2081-02�������������������� 233 H2081�������������������������� 233 H2081CH�������������������� 233 H2081CH-02�������������� 233 H2081SC��������������������� 233 H2081SC-02�������������� 233 H2082�������������������������� 232 H2085-01�������������������� 226 H2085�������������������������� 226 H2085SS-01��������������� 226 H2085SS��������������������� 226 H2086�������������������������� 247 H2089-01�������������������� 245 H2089�������������������������� 245 H2093�������������������������� 227 H2095�������������������������� 234 H2095SS��������������������� 234 H2099BK��������������������� 230 H2099NP�������������������� 230 H2099SS��������������������� 230 H2216�������������������������� 238 H2217�������������������������� 270 H2219BK��������������������� 237 H2219G����������������������� 237 H2229P������������������������ 269 H2230P������������������������ 269 H2231P������������������������ 270 H2232P-01����������������� 270 H2232P-02����������������� 270 H2233�������������������������� 237 H2241SS-01��������������� 231 H2241SS-02��������������� 231 H2241SS-03��������������� 231 H2242N����������������������� 250 H2243N����������������������� 250 H2244N����������������������� 250 H2245N����������������������� 250 H2246BK-01�������������� 241 H2246BK-02�������������� 241 H2246BK-03�������������� 241 H2246CH-01�������������� 241 H2246CH-02�������������� 241 H2246CH-03�������������� 241 H2247BK��������������������� 238 H2248BK��������������������� 245 H2249BK��������������������� 244 H2250BK��������������������� 240 H2250CH�������������������� 240 H2251BK��������������������� 240 H2252BK��������������������� 257 H2253BK-01�������������� 239 H2253BK-02�������������� 239 H2253BK-03�������������� 239 H2254CH�������������������� 240 H2255BK-01�������������� 241 H2255BK-02�������������� 241 H2256BK��������������������� 235 H2257BK-01�������������� 235 H2257BK��������������������� 235 H2258BK��������������������� 244 H2259SS-01��������������� 234 H2259SS��������������������� 234 H2260-01�������������������� 243 H2260�������������������������� 242 H2260SS-01��������������� 243 H2261CH�������������������� 244 H2262�������������������������� 243 H2263CH-L���������������� 243 H2263CH-R���������������� 243 H2264�������������������������� 244 H2265BK��������������������� 244 H2266SS��������������������� 230 H2267�������������������������� 247
To Place Order:
ualu0 weld 01
F
G
H
800.433.5554
1755 5' E£V008
E103������������������������������ 328 E103SS������������������������� 328 E106������������������������������ 328 E106SS������������������������� 328 E109������������������������������ 328 E109SS������������������������� 328 E112������������������������������ 328 E115������������������������������ 328 E115SS������������������������� 328 E118������������������������������ 328 E121������������������������������ 328 E121SS������������������������� 328 E124������������������������������ 328 E124SS������������������������� 328 E127������������������������������ 328 E130SS������������������������� 328 E133������������������������������ 328 E136������������������������������ 328 E139������������������������������ 328 E142������������������������������ 328 E145������������������������������ 328 E203������������������������������ 329 E203SS������������������������� 329 E203SST���������������������� 329 E203ZN������������������������ 329 E206������������������������������ 329 E206SS������������������������� 329 E206SST���������������������� 329 E206ZN������������������������ 329 E209������������������������������ 329 E209SS������������������������� 329 E209SST���������������������� 329 E209ZN������������������������ 329 E212������������������������������ 329 E212ZN������������������������ 329 E215������������������������������ 329 E215SS������������������������� 329 E215SST���������������������� 329 E215ZN������������������������ 329 E218������������������������������ 329 E218ZN������������������������ 329 E221������������������������������ 329 E221SS������������������������� 329 E221SST���������������������� 329 E221ZN������������������������ 329 E224������������������������������ 329 E224SS������������������������� 329 E224SST���������������������� 329 E224ZN������������������������ 329 E227������������������������������ 329 E227ZN������������������������ 329 E230������������������������������ 329 E230SS������������������������� 329 E230SST���������������������� 329 E230ZN������������������������ 329 E233������������������������������ 329 E236������������������������������ 329 E239������������������������������ 329 E242������������������������������ 329 E245������������������������������ 329
FH100WTP����������������� 271 FH122-01�������������������� 275 FH122-02�������������������� 275 FH122-03�������������������� 275 FH122-04�������������������� 275 FH134-01�������������������� 275 FH134-02�������������������� 275 FH134-03�������������������� 275 FH134-04�������������������� 275 FH144-01�������������������� 275 FH144-02�������������������� 275 FH144-03�������������������� 275 FH150BKP10������������� 271 FH150BKP������������������ 271 FH150WTP����������������� 271 FH200BKP������������������ 271 FH200BKP50������������� 271 FH200WTP����������������� 271 FJ123040L������������������ 248 FJ123040R������������������ 248 FJ124040L������������������ 248 FJ124040R������������������ 248 FJ41220L��������������������� 248 FJ41220R�������������������� 248 FJ41520L��������������������� 248 FJ41520R�������������������� 248 FJ41525L��������������������� 248 FJ41525R�������������������� 248 FJ42030L��������������������� 248 FJ42030R�������������������� 248 FJ61015L��������������������� 248 FJ61015R�������������������� 248 FJ61220L��������������������� 248 FJ61220R�������������������� 248 FJ61520L��������������������� 248 FJ61520R�������������������� 248 FJ61720SS������������������ 249 FJ62020L��������������������� 248 FJ62020R�������������������� 248 FJ62025L��������������������� 248 FJ62025R�������������������� 248 FJ62030L��������������������� 248 FJ62030R�������������������� 248 FJ71130L01���������������� 249 FJ71520L��������������������� 248 FJ71520R�������������������� 248 FJ72025L��������������������� 248 FJ72025R�������������������� 248 FJ72030L��������������������� 248 FJ72030R�������������������� 248 FJ73040L��������������������� 248 FJ73040R�������������������� 248 FJ92025L��������������������� 248 FJ92025R�������������������� 248 FJ92030L��������������������� 248 FJ92030R�������������������� 248 FJ93030L��������������������� 248 FJ93030R�������������������� 248 FJ93040L��������������������� 248 FJ93040R�������������������� 248
[email protected]
Luoydads@Japao
D
D127����������������������������� 318 D200����������������������������� 318 D200SS������������������������ 318 D325����������������������������� 109 D326����������������������������� 109 D350�������������������������������� 22 D379����������������������������� 325 D387����������������������������� 319 D388-01���������������������� 319 D388����������������������������� 319 D392BK-01�������������������� 74 D392BK-02�������������������� 74 D392BK�������������������������� 74 D392S-01����������������������� 74 D392S-02����������������������� 74 D393BK-01�������������������� 75 D393BK-02�������������������� 75 D393BK�������������������������� 75 D394BK-01�������������������� 75 D394BK-02�������������������� 75 D394BK�������������������������� 75 D395BK-01�������������������� 74 D395BK-02�������������������� 74 D395BK�������������������������� 74 D395S-01����������������������� 74 D395S-02����������������������� 74 D400BK-01�������������������� 77 D400BK�������������������������� 77 D400W-01��������������������� 77 D400W���������������������������� 77 D401�������������������������������� 75 D402�������������������������������� 75 D403�������������������������������� 76 D404�������������������������������� 78 D405BK�������������������������� 77 D405W���������������������������� 77 D406�������������������������������� 78 D407G����������������������������� 76 D407W���������������������������� 76 D408G����������������������������� 76 D408W���������������������������� 76 D409BR�������������������������� 77 D409W���������������������������� 77 D410BR�������������������������� 77 D411�������������������������������� 74 D415-01������������������������� 78 D415�������������������������������� 78 D416�������������������������������� 76 D418-01������������������������� 79 D418-03������������������������� 79 D418-05������������������������� 79 D434�������������������������������� 73 D436BK-01�������������������� 76 D436BK�������������������������� 76 D436W-01��������������������� 76 D436W���������������������������� 76 D440�������������������������������� 73 D446����������������������������� 242
E
Index
CT505BK��������������������� 273 CT510��������������������������� 273 CT510BK��������������������� 273 CT520��������������������������� 273 CT520BK��������������������� 273 CT530��������������������������� 273 CT530BK��������������������� 273 CT540��������������������������� 273 CT540BK��������������������� 273 CT550��������������������������� 273 CT550BK��������������������� 273 CT560��������������������������� 273 CT560BK��������������������� 273
337
161 LZE 81 81
SSZZ091 OZ091 SS9ZLE1 9ZLE1
LLZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ 8LZ 8LZ 8LZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ LLZ
560E1 EOLDN ZOZ 90E SS915M-ISH Z8Z E60E1 ZOLDN ZOZ 90E 160VHSH LLZ SSZ60E1 LOZ LOLDN 90E 91Z1HSH LLZ Z60E1 LOZ OOLDN 90E ZLOIHSH LLZ SSL60E1 LOZ OEODN 90E 00017H 160E1 48Z LOZ OLODN 90E d6ESEH L9Z SS060E1 LOZ 90001 90E LESEH 9172 060E1 L6Z LOO---dDIOSN LOZ dZESEH SSL90E1 69Z'" LOO---N8105N 1761 L6Z dLESEH 69Z 190E1 LONSAMI 1761 66Z dOESEH 69Z SS090E1 LOdDIOVN 1761 86Z d8ZSEH 090E1 99Z 10EN 1761 66Z dLZSEH 99Z E-600E1 LZZN 8 80E d9ZSEH 99Z Z-600E1 OZZN 8 80E dEZSEH 99Z L-600E1 8' • LOdNJAZN ZOE' dZZSEH 99Z E-800E1 ZOd390ZN 8 00E dLZSEH 99Z Z-800E1 LOd390ZN 8 00E dOZSEH 99Z 8 "'"'"""'""""""""1-800£1 dDLOZN ZOE d6LSEH 99Z 900E1 N8L0ZN 8 ZOE d8LSEH 99Z SS88LZr LON81LLN LP? 86Z dLLSEH L9Z SS88LZI " LOO--dDiOLN LOZ L6Z d9LSEH L9Z 88121 L6Z LOO--dDOOLN LP? d5LSEH L9Z 88121 L6Z LOO--dDIOLN LOZ d17LSEH L9Z SSOELZI L6Z 100---d7I60N LVZ dELSEH L9Z SSOELZr LOZ 190)1 86Z dZLSEH L9Z OELZr 05d3ISON LP? ZOE dLLSEH L9Z OELZI 96Z Z00--SSAVON LOZ L9Z — ''''''"--- 50-dLLSEH SSSLLZr 96Z 100--SSAVON 00Z 170-dLOSEH L9Z 680Zr 96Z 900--SSI1ON EL EO-dLLSEH L9Z E0-680Zr 96Z 500--SSI1ON EL L9Z """"' "--ZO-dLLSEH ZO-680Zr EL 1700----SSI1ON 96Z LO-dLLSEH L9Z LO-68021 96Z E00--SSIVON EL SO-dOLSEH 89Z SS880Zr 96Z Z00--SSI1ON 00Z ZO-dOLSEH 89Z E80Zr LOO—SSIVON LZZ 96Z LO-dOLSEH 89Z NIVLOZI LOO--dDIVON 00Z 96Z SO-d6OSEH 89Z LO-NIVLOU LOO--d8I1ON 00Z 96Z ZO-d6OSEH 89Z SSELOU Z00---SSOVON 00Z 96Z LO-d6OSEH 89Z Z0-d9E0Zr LZE LOO---SSOPON 96Z 170-d8OSEH 89Z LO-d9E0Zr OSHDOVON LZE EOE EO-d8OSEH 89Z 9EOZI 66Z 200--ssrvoN LZE dLOSEH 89Z KOZI 66Z LOO--SSIVON 561 d9OSEH L9Z 800Zr 96Z LOO---SSIVON LZE SO-d9OSEH L9Z LOOZr ''''''''''''' LZE 96Z EO-d9OSEH L9Z 900Zr 96Z 500---SSIVON LZE LO-d9OSEH L9Z SOOZr LZE 1700---SSIVON 96Z 50-dSOSEH 89Z 1700Zr 96Z' ''''"£00---SSIVON LZE 170-dSOSEH 89Z E00Zr Z00---SSIVON LZE 96Z EO-dSOSEH 89Z 100--- SSIVON 96Z ZO-dSOSEH 89Z I. LOO---dDIVON 96Z LO-dSOSEH 89Z -d8IV0N 96Z d'VOSEH 99Z 8818H1H DVON 80E dEOSEH ZLO8H11-1 99Z Z00--SS31ON 96Z 99Z — ''''''''-- LO-dEOSEH LOSSZLO8H11-1 LOO--SSD,ON 96Z dZOSEH 8619H1H 99Z Z00--SS817ON 96Z dLOSEH 99Z 176091-111-1 LOO--SSeVON 96Z dOOSEH 1609H1H 99Z OLdJdEON ZOE 08LEH 182 ZLO9H11-1 60d3dE0N 66Z ISSOLLEH LOSSZLO9H1H 1782 80d3dE0N LOE L6OSHIH 98Z — SSS009LEH 90d7dE0N 00E VS009LEH 98Z SSL61171-11H SOdDdEON 00E 5009LEH 98Z 160171-11H bOdDdEON 00E SS17009LEH SSO6SEHI1-1 S8Z LOVHD-EON LOE Vb009LEH N806SEHIH 58Z 901,14,0-EON LOE 17009LEH 06SEHIH 58Z Inc SOVWD-EON SSE009LEH LL1711-111-1 L8Z LOE -- ''''''''' bOVIIVD-EON VE009LEH ZLZLHIH L8Z EOVIVD-EON LOE E009LEH LLZLH_LH L8Z ZOVIVD-EON LOE SSLOO9LEH N8860LH_LH 68Z LOE"""""""' LOVIVD-EON LO-SS1009LEH bLOLH_LH 68Z dDOZON EOE VLOO9LEH ZLOLHIH 68Z 1009LEH 8118HSH 68Z SS0009LEH SSZLOOHSH 88Z V0009LEH 1609HSH 88Z 0009LEH SS17109HSH 88Z SSSOOPLEH ZLO9HSH 98Z VSOOPLEH 160SHSH 98Z
J2003���������������������������� 327 J2004���������������������������� 327 J2005���������������������������� 327 J2006���������������������������� 327 J2007���������������������������� 327 J2008���������������������������� 327 J2014���������������������������� 195 J2036���������������������������� 321 J2036P-01������������������ 321 J2036P-02������������������ 321 J2073SS����������������������� 200 J2074ZN-01��������������� 200 J2074ZN���������������������� 200 J2083���������������������������� 227 J2088SS����������������������� 200 J2089-01������������������������ 73 J2089-02������������������������ 73 J2089-03������������������������ 73 J2089������������������������������� 73 J2115SS����������������������� 200 J2130���������������������������� 201 J2130���������������������������� 247 J2130SS����������������������� 201 J2130SS����������������������� 247 J2188���������������������������� 201 J2188���������������������������� 247 J2188SS����������������������� 201 J2188SS����������������������� 247 J3006��������������������������������� 8 J3008-1����������������������������� 8 J3008-2����������������������������� 8 J3008-3����������������������������� 8 J3009-1����������������������������� 8 J3009-2����������������������������� 8 J3009-3����������������������������� 8 J3060���������������������������� 194 J3060SS����������������������� 194 J3061���������������������������� 194 J3061SS����������������������� 194 J3090���������������������������� 201 J3090SS����������������������� 201 J3091���������������������������� 201 J3091SS����������������������� 201 J3092���������������������������� 201 J3092SS����������������������� 201 J3093���������������������������� 202 J3095���������������������������� 202
@ www.spep.com
K02OCP����������������������� 303 K03-CAM01��������������� 301 K03-CAM02��������������� 301 K03-CAM03��������������� 301 K03-CAM04��������������� 301 K03-CAM05��������������� 301 K03-CAM06��������������� 301 K03-CAM07��������������� 301 K03PCP04������������������� 300 K03PCP05������������������� 300 K03PCP06������������������� 300 K03PCP08������������������� 301 K03PCP09������������������� 299 K03PCP10������������������� 302 K04BSS---001������������ 296 K04BSS---002������������ 296 K04ESS---001������������ 296 K04ESS---002������������ 296 K04G����������������������������� 308 K04IBP---001������������� 296 K04ICP---001������������� 296 K04ISS ---001������������ 296 K04ISS---002������������� 296 K04ISS---003������������� 296 K04ISS---004������������� 296 K04ISS---005������������� 296 K04ISS---006������������� 296 K04ISS---007������������� 296 K04JSS---001������������� 299 K04JSS---002������������� 299 K04OCH50 ���������������� 303 K04OSS---001����������� 296 K04OSS---002����������� 296 K04TBP---001������������ 296 K04TCP---001������������ 296 K04TSS---001������������ 296 K04TSS---002������������ 296 K04TSS---003������������ 296 K04TSS---004������������ 296 K04TSS---005������������ 296 K04TSS---006������������ 296 K04YSS---001������������ 296 K04YSS---002������������ 296 K05ICP50�������������������� 302 K06I������������������������������� 298 K09ICP---001������������� 297 K10ICP---001������������� 297 K10OCP---001����������� 297 K10TCP---001������������ 297 K17LBK01������������������� 298 K201BK������������������������ 302 K201CP������������������������ 302 K206CP01������������������� 300 K206CP02������������������� 300 K21TNP01������������������ 302 K220����������������������������� 308 K221����������������������������� 308 K30L����������������������������� 299 K40ICP01�������������������� 298 K40YBK01������������������� 299 K50IBK---001������������� 297 K50ICP---001������������� 297 KC006��������������������������� 306 KC010��������������������������� 306 KC030��������������������������� 306 KC100��������������������������� 306 KC101��������������������������� 306 KC102��������������������������� 306 KC103��������������������������� 306
LSZDN 9520N SSZDN .175Z0N ESZDN ZSZDN LSZDN OSZDN 617Z0N 817Z0N LVZDN 917Z0N 6LZ0N 8120N LLZDN 9120N SLZDN bLZDN ELZDN ZLZDN LLZDN OLZDN 6020N 80201 LOZDN 9020N SOZDN 170ZDN EOZDN ZOZDN LOZDN Z9LDN 1917N 09101 65L3N BSIDN LSLDN 95L3N SSIDN .VSLDN ESLDN ZSLDN ISBN OSLDN 61713N 81713N L.VLDN LELDN OELDN 6ZL3N 8ZI3N LZLDN 9ZLDN SZLDN 17ZL3N EZLDN ZZLDN LZLDN OZLDN 6113N 8LL7N LIMN 9113N SINN .17LLDN ELLDN ?LLDN LLLDN OLLDN 6013N 8017N LOLDN 9013N SOLDN bOLDN
Download
J
K
KC104��������������������������� 306 KC105��������������������������� 306 KC106��������������������������� 306 KC107��������������������������� 306 KC108��������������������������� 306 KC109��������������������������� 306 KC110��������������������������� 306 KC111��������������������������� 306 KC112��������������������������� 306 KC113��������������������������� 306 KC114��������������������������� 306 KC115��������������������������� 306 KC116��������������������������� 306 KC117��������������������������� 306 KC118��������������������������� 306 KC119��������������������������� 306 KC120��������������������������� 306 KC121��������������������������� 306 KC122��������������������������� 306 KC123��������������������������� 306 KC124��������������������������� 306 KC125��������������������������� 306 KC126��������������������������� 306 KC127��������������������������� 306 KC128��������������������������� 306 KC129��������������������������� 306 KC130��������������������������� 306 KC131��������������������������� 306 KC147��������������������������� 306 KC148��������������������������� 306 KC149��������������������������� 306 KC150��������������������������� 306 KC151��������������������������� 306 KC152��������������������������� 306 KC153��������������������������� 306 KC154��������������������������� 306 KC155��������������������������� 306 KC156��������������������������� 306 KC157��������������������������� 306 KC158��������������������������� 306 KC159��������������������������� 306 KC160��������������������������� 306 KC161��������������������������� 306 KC162��������������������������� 306 KC201��������������������������� 307 KC202��������������������������� 307 KC203��������������������������� 307 KC204��������������������������� 307 KC205��������������������������� 307 KC206��������������������������� 307 KC207��������������������������� 307 KC208��������������������������� 307 KC209��������������������������� 307 KC210��������������������������� 307 KC211��������������������������� 307 KC212��������������������������� 307 KC213��������������������������� 307 KC214��������������������������� 307 KC215��������������������������� 307 KC216��������������������������� 307 KC217��������������������������� 307 KC218��������������������������� 307 KC219��������������������������� 307 KC246��������������������������� 307 KC247��������������������������� 307 KC248��������������������������� 307 KC249��������������������������� 307 KC250��������������������������� 307 KC251��������������������������� 307 KC252��������������������������� 307 KC253��������������������������� 307 KC254��������������������������� 307 KC255��������������������������� 307 KC256��������������������������� 307 KC257��������������������������� 307
KC258��������������������������� 307 KC301��������������������������� 307 KC302��������������������������� 307 KC303��������������������������� 307 KC304��������������������������� 307 KC305��������������������������� 307 KC306��������������������������� 307 KC307��������������������������� 307 KC308��������������������������� 307 KC309��������������������������� 307 KC310��������������������������� 307 KC311��������������������������� 307 KC312��������������������������� 307 KC313��������������������������� 307 KC314��������������������������� 307 KC315��������������������������� 307 KC316��������������������������� 307 KC317��������������������������� 307 KC318��������������������������� 307 KC319��������������������������� 307 KC346��������������������������� 307 KC347��������������������������� 307 KC348��������������������������� 307 KC349��������������������������� 307 KC350��������������������������� 307 KC351��������������������������� 307 KC352��������������������������� 307 KC353��������������������������� 307 KC354��������������������������� 307 KC355��������������������������� 307 KC356��������������������������� 307 KC357��������������������������� 307 KC358��������������������������� 307 KC404��������������������������� 306 KC405��������������������������� 306 KC406��������������������������� 306 KC407��������������������������� 306 KC408��������������������������� 306 KC409��������������������������� 306 KC410��������������������������� 306 KC411��������������������������� 306 KC412��������������������������� 306 KC413��������������������������� 306 KC414��������������������������� 306 KC415��������������������������� 306 KC416��������������������������� 306 KC417��������������������������� 306 KC418��������������������������� 306 KC419��������������������������� 306 KC420��������������������������� 306 KC421��������������������������� 306 KC422��������������������������� 306 KC429��������������������������� 306 KC430��������������������������� 306 KC431��������������������������� 306 KC432��������������������������� 306 KC433��������������������������� 306 KC434��������������������������� 306 KC435��������������������������� 306 KC436��������������������������� 306 KC437��������������������������� 306 KC438��������������������������� 306 KC439��������������������������� 306 KC440��������������������������� 306 KC441��������������������������� 306 KC442��������������������������� 306 KC443��������������������������� 306 KC444��������������������������� 306 KC445��������������������������� 306 KC446��������������������������� 306 KC447��������������������������� 306 KC454��������������������������� 306 KC455��������������������������� 306 KC456��������������������������� 306 KC457��������������������������� 306
LDON LOE 9517ON LOE SDON LOE 175173N LOE LVVDN LOE 9VPDN LOE SVION LOE VVVDN LOE' EVVDN LOE ZVION LOE LVVDN LOE' OVVDN LOE 6D3N LOE 8DDN LOE' LDON LOE 9D3N LOE SDON COE 17E170N LOE EDON LOE ZeVDN LOE LDON LOE ODON LOE 6Z173N LOE ZZVDN LOE LUON LOE OZiON LOE 61177N LOE MON LOE LIION LOE 9130N LOE SL.VDN LOE bLiON 90E ELtON 90E — ZLI7DN 90E LL.VDN 90E OLtON 90E' 60170N 90E 80173N 90E LOVDN 90E'90173N 90E SMON 90E VOVDN 90E 85E3N 90E LSEDN 90E 9SEDN 90E SSEDN 90E 175E3N 90E ESEDN 90E ZSEDN 90E LSEDN 90E OSEDN 90E 6VE3N 90E aVEDN 90E LVEDN 90E 917E3N 90E 61E3N 90E 81E3N 90E LLEDN 90E' 91E3N 90E SLEDN 90E VLEDN 90E' ELEDN 90E ZLEDN 90E LLEDN 90E OLEDN 90E 60E3N 90E 80E3N 90E LOEDN 90E 90E3N 90E SOEDN 90E 170E3N 90E EOEDN 90E ZOEDN 90E LOEDN 90E 85Z0N 90E
J3126������������������������������� 18 J3126SS�������������������������� 18 J6020���������������������������� 321 J6022SS����������������������� 197
KC458��������������������������� 306 KC459��������������������������� 306 KC460��������������������������� 306 KC461��������������������������� 306 KC462��������������������������� 306 KC463��������������������������� 306 KC464��������������������������� 306 KC465��������������������������� 306 KC466��������������������������� 306 KC467��������������������������� 306 KC468��������������������������� 306 KC469��������������������������� 306 KC470��������������������������� 306 KC471��������������������������� 306 KC472��������������������������� 306 KC479��������������������������� 306 KC480��������������������������� 306 KC481��������������������������� 306 KC482��������������������������� 306 KC483��������������������������� 306 KC484��������������������������� 306 KC485��������������������������� 306 KC486��������������������������� 306 KC487��������������������������� 306 KC488��������������������������� 306 KC489��������������������������� 306 KC490��������������������������� 306 KC491��������������������������� 306 KC492��������������������������� 306 KC493��������������������������� 306 KC494��������������������������� 306 KC495��������������������������� 306 KC496��������������������������� 306 KC497��������������������������� 306 KC601��������������������������� 307 KC602��������������������������� 307 KC603��������������������������� 307 KC604��������������������������� 307 KC605��������������������������� 307 KC606��������������������������� 307 KC607��������������������������� 307 KC608��������������������������� 307 KC609��������������������������� 307 KC610��������������������������� 307 KC611��������������������������� 307 KC612��������������������������� 307 KC613��������������������������� 307 KC614��������������������������� 307 KC615��������������������������� 307 KC616��������������������������� 307 KC617��������������������������� 307 KC618��������������������������� 307 KC627��������������������������� 307 KC628��������������������������� 307 KC629��������������������������� 307 KC630��������������������������� 307 KC631��������������������������� 307 KC632��������������������������� 307 KC633��������������������������� 307 KC634��������������������������� 307 KC635��������������������������� 307 KC636��������������������������� 307 KC637��������������������������� 307 KC638��������������������������� 307 KC639��������������������������� 307 KC640��������������������������� 307 KC641��������������������������� 307 KC642��������������������������� 307 KC643��������������������������� 307 KC653��������������������������� 307 KC654��������������������������� 307 KC655��������������������������� 307 KC656��������������������������� 307 KC657��������������������������� 307 KC658��������������������������� 307
85901 90E 1593)1 90E 95901 90E 55901 90E 17593N 90E ES9JN 90E D93N 90E Z1793N 90E L.V93N 90E 01793N 90E 6E93N 90E 8E93N 90E LE93N 90E 9E93N 90E SE93N 90E 17E93N 90E EE93N 90E ZE93N 90E LE93N 90E 0E9DN 90E 6Z97N 90E 8Z93N 90E LZ9DN 90E 8197N 90E 1193)1 90E 91901 90E 5197N 90E 17193N 90E E193N 90E ZL9DN 90E 11901 90E O193N 90E 6097N 90E 80901 90E 1093)1 90E 90901 90E S093N 90E 17093N 90E E093N 90E Z093N 90E 1093N 90E L6173N 90E 900N LOE 5617ON LOE VelON LOE EDON LOE ZOON LOE L6173N LOE 06177N LOE 68173N LOE 88173N LOE 18130N LOE 98173N LOE SDON LOE 178130N LOE EDON LOE ?DON LOE LDON LOE ODON LOE 6L173N LOE ZLI;ON LOE ILION LOE OLION LOE 69b3N LOE 89173N LOE 19173N LOE 99173N LOE 5910N LOE 179173N LOE EDON LOE ?DON LOE 1.9173N LOE ODON LOE 65173N LOE 85173N LOE
HSH5091��������������������� 277 HSH6012 �������������������� 277 HSH6014SS���������������� 277 HSH6091��������������������� 277 HSH8012SS���������������� 277 HSH8118��������������������� 277 HTH1012��������������������� 277 HTH1014��������������������� 277 HTH1098BK��������������� 277 HTH1211��������������������� 277 HTH1212��������������������� 277 HTH1411��������������������� 277 HTH3590��������������������� 278 HTH3590BK��������������� 278 HTH3590SS���������������� 278 HTH4091��������������������� 277 HTH4191SS���������������� 277 HTH5091��������������������� 277 HTH6012SS01����������� 277 HTH6012��������������������� 277 HTH6091��������������������� 277 HTH6094��������������������� 277 HTH6198��������������������� 277 HTH8012SS01����������� 277 HTH8012��������������������� 277 HTH8188��������������������� 277
LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE --LOE LOE LOE --LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE LOE 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E 90E --90E 90E 90E --90E 90E 90E 90E 90E 90E 90E 90E
31113Wel MIMS
woydadmvuvt 613(10Viat peoiumoa
Index
"NV 9141t"---
to
338
H314005A������������������ 286 H314005SS���������������� 286 H316000��������������������� 288 H316000A������������������ 288 H316000SS���������������� 288 H316001��������������������� 289 H316001A������������������ 289 H316001SS-01���������� 289 H316001SS���������������� 289 H316003��������������������� 287 H316003A������������������ 287 H316003SS���������������� 287 H316004��������������������� 285 H316004A������������������ 285 H316004SS���������������� 285 H316005��������������������� 286 H316005A������������������ 286 H316005SS���������������� 286 H3170SST������������������� 284 H3180�������������������������� 281 H3500P������������������������ 266 H3501P������������������������ 266 H3502P������������������������ 266 H3503P-01����������������� 266 H3503P������������������������ 266 H3504P������������������������ 266 H3505P-01����������������� 268 H3505P-02����������������� 268 H3505P-03����������������� 268 H3505P-04����������������� 268 H3505P-05����������������� 268 H3506P-01����������������� 267 H3506P-03����������������� 267 H3506P-05����������������� 267 H3506P������������������������ 267 H3507P������������������������ 268 H3508P-03����������������� 268 H3508P-04����������������� 268 H3509P-01����������������� 268 H3509P-02����������������� 268 H3509P-05����������������� 268 H3510P-01����������������� 268 H3510P-02����������������� 268 H3510P-05����������������� 268 H3511P-01����������������� 267 H3511P-02����������������� 267 H3511P-03����������������� 267 H3511P-04����������������� 267 H3511P-05����������������� 267 H3511P������������������������ 267 H3512P������������������������ 267 H3513P������������������������ 267 H3514P������������������������ 267 H3515P������������������������ 267 H3516P������������������������ 267 H3517P������������������������ 267 H3518P������������������������ 266 H3519P������������������������ 266 H3520P������������������������ 266 H3521P������������������������ 266 H3522P������������������������ 266 H3523P������������������������ 266 H3526P������������������������ 266 H3527P������������������������ 266 H3528P������������������������ 266 H3530P������������������������ 269 H3531P������������������������ 269 H3532P������������������������ 269 H3537�������������������������� 246 H3539P������������������������ 267 H4000�������������������������� 284 HSH1012��������������������� 277 HSH1216��������������������� 277 HSH4091��������������������� 277 HSH4516SS���������������� 282
BEE
Hinges and Industrial Industrial Hardware Hardware Hinges and
To Place Order: Orden To Place
800.433.5554 800.433.5554
[email protected] [email protected]
Index
52 PLSCH501��������������������� 52 PLSCH501 265 ML23P�������������������������� 265 277 ML23P LSH3055��������������������� 277 307 U186060L.... ........ ......248 248 LSH3055 LJ186060L������������������ KC867��������������������������� 307 KC867 307 KC659��������������������������� 307 KC659 52 52 PLSCH502��������������������� 265 265 PLSCH502 ML26P-01������������������� 277 ML26P-01 277 �������������������� LSH3060 248 LSH3060 248 LJ186060R������������������ 307 307 U186060R KC868��������������������������� 307 307 KC868 KC660��������������������������� KC660 52 PLSCH503��������������������� 52 265 PLSCH503 ML26P�������������������������� 265 277 ML26P LSH4055��������������������� 277 248 LSH4055 LJ41015LS������������������ 248 307 LJ41015LS KC878��������������������������� 307 307 KC878 307 KC661��������������������������� KC661 52 PLSCH504��������������������� 52 265 PLSCH504 ML27P-01������������������� 265 277 ML27P-01 LSH4060��������������������� 277 248 LSH4060 LJ41015L�������������������� 248 307 U41015L KC879��������������������������� 307 307 KC879 KC662��������������������������� 307 KC662 52 PLSCH507��������������������� 52 265 PLSCH507 ML27P�������������������������� 265 277 ML27P LSH4160��������������������� 277 248 LSH4160 LJ41015RS������������������ 248 307 LJ41015RS KC880��������������������������� 307 307 307 KC880 KC663��������������������������� KC663 52 PLSCH509��������������������� 52 265 PLSCH509 ML28P-01������������������� 265 277 ML28P-01 LSH5063��������������������� 277 248 LSH5063 LJ41015R�������������������� 248 307 LJ41015R KC881��������������������������� 307 307 307 KC881 KC664��������������������������� KC664 52 52 PLSCH510��������������������� 265 265 PLSCH510 ML28P�������������������������� 277 277 ML28P LSH6063��������������������� 248 LSH6063 248 LJ41215L�������������������� 307 307 LJ41215L KC882��������������������������� 307 KC882 KC665��������������������������� 307 KC665 52 PLSCH545��������������������� 52 264 PLSCH545 ML32-01���������������������� 264 277 ML32-01.._ LSH8079��������������������� 277 LSH8079 U41215R...... ........ ...... 248 248 LJ41215R�������������������� 307 KC883��������������������������� 307 307 KC883 KC666��������������������������� 307 KC666 52 PLSCH751��������������������� 52 264 PLSCH751 ML32���������������������������� 264 277 ML32 LSH8180SS����������������� 277 248 LSH8180SS LJ41520L�������������������� 248 307 LJ41520L KC884��������������������������� 307 307 307 KC884 KC667��������������������������� KC667 52 PLSSP1��������������������������� 52 264 PLSSP1 ML35���������������������������� 264 277 ML35 LTH1071���������������������� 277 248 LTH1071 LJ41520R�������������������� 248 307 U41520R KC885��������������������������� 307 307 KC885 307 KC668��������������������������� KC668 50 PMCH545���������������������� 50 264 PMCH545 ML35SST��������������������� 264 277 ML35SST LTH2047���������������������� 277 248 LTH2047 LJ41525L�������������������� 248 307 LJ41525L KC886��������������������������� 307 307 KC886 KC678��������������������������� 307 KC678 50 50 PMSP1���������������������������� 264 264 PMSP1 ML36���������������������������� 277 277 ML36 LTH2055���������������������� 248 LTH2055 248 LJ41525R�������������������� 307 307 LJ41525R KC887��������������������������� 307 KC887 KC679��������������������������� 307 KC679 51 264 PNBH034 PNBH034����������������������� 51 ML37���������������������������� 264 277 ML37 LTH3055���������������������� 277 248 LTH3055 248 LJ42025LS������������������ 307 LJ42025 LS KC888��������������������������� 307 307 307 KC888 KC680��������������������������� KC680 51 PNCH501����������������������� 51 259 PNCH501 ML38���������������������������� 259 277 ML38 LTH4055���������������������� 277 248 LTH4055 LJ42025L�������������������� 248 307 LJ42025L KC889��������������������������� 307 307 KC889 307 KC681��������������������������� KC681 51 PNCH502����������������������� 51 260 PNCH502 ML39���������������������������� 260 277 ML39 LTH5063���������������������� 277 248 248 LTH5063 LJ42025RS������������������ 307 U42025 RS.. KC890��������������������������� 307 307 KC890 KC682��������������������������� 307 KC682...._ 51 PNCH503����������������������� 51 263 PNCH503 ML42-01���������������������� 263 277 ML42-01 LTH5071���������������������� 277 248 LTH5071 LJ42025R�������������������� 248 307 LJ42025R KC891��������������������������� 307 307 307 KC891 KC683��������������������������� KC683 51 51 PNCH504����������������������� 263 263 PNCH504 ML42���������������������������� 277 277 ML42 LTH5579SS����������������� 248 LTH5579SS 248 LJ61220LS������������������ 307 307 LJ61220LS KC892��������������������������� 307 KC892 307 KC684��������������������������� KC684 51 PNCH507����������������������� 51 263 PNCH507 ML45-01���������������������� 263 277 ML45-01 LTH6063���������������������� 277 248 LTH6063 LJ61220L�������������������� 248 307 LJ61220L KC893��������������������������� 307 307 KC893 KC685��������������������������� 307 KC685 51 PNCH509����������������������� 51 263 PNCH509 ML45���������������������������� 263 277 ML45 LTH8079���������������������� 277 248 LTH8079 LJ61220RS������������������ 248 306 L161220RS KC900��������������������������� 306 307 KC900 KC686��������������������������� 307 KC686 51 PNCH510����������������������� 51 263 PNCH510 ML46-01���������������������� 263 277 ML46-01 LTH9579���������������������� 277 248 LTH9579 LJ61220R�������������������� 248 309 U61220R KH02BP����������������������� 309 307 307 KHO2BP KC687��������������������������� KC687 51 PNCH545����������������������� 51 263 PNCH545 ML46���������������������������� 263 ML46 248 LJ61520LS������������������ 248 309 LJ61520LS KH02CP����������������������� 309 307 KHO2CP 307 KC688��������������������������� KC688 51 51 PNLL72��������������������������� 260 260 PNLL72 ML47CH���������������������� ML47CH 248 248 LJ61520L�������������������� 309 309 LJ61520L KH02NP����������������������� 307 KHO2NP M M KC689��������������������������� 307 KC689.. 51 PPNSP1�������������������������� 51 260 PPNSP1 ML48CH���������������������� 260 ML48CH 248 LJ61520RS������������������ 248 309 U61520R5 KH02SS������������������������ 309 307 307 KHO2SS KC690��������������������������� KC690 M0627�������������������������� 294 248 M0627 261 ML49SS����������������������� 261 294 ML49SS LJ61520R�������������������� 248 309 U61520R KH04����������������������������� 309 307 KHO4 307 KC691��������������������������� KC691 294 ML50LH M0827�������������������������� 294 248 M0827 257 ML50LH����������������������� 257 S S LJ61525L�������������������� 248 309 LJ61525L KH10����������������������������� 309 307 KH10 KC692��������������������������� 307 KC692 224 ML50RH M0990�������������������������� 248 M0990 257 ML50RH���������������������� 257 224 LJ61525R�������������������� 248 309 LJ61525R.. KH11����������������������������� 309 307 KH11 KC693��������������������������� 307 KC693 207 S12022������������������������� 207 256 512022 M0991�������������������������� 224 248 M0991 ML51LH����������������������� 256 224 ML51LH LJ62021L�������������������� 248 309 LJ62021L KH12����������������������������� 309 307 307 KH12 KC801��������������������������� KC801 207 S1202296�������������������� 207 256 51202296 224 M0992�������������������������� 248 M0992 256 ML51RH���������������������� 224 ML51RH LJ62021R�������������������� 248 309 LJ62021R KH20����������������������������� 309 307 KH2O 307 KC802��������������������������� KC802 207 207 S12032������������������������� 256 512032 224 M0993�������������������������� 248 M0993 ML55LH-01���������������� 256 224 ML55LH-01 LJ62030L�������������������� 248 309 LJ62030L KH23����������������������������� 309 307 KH23 KC803��������������������������� 307 KC803 207 S12522������������������������� 207 256 512522 224 M0994�������������������������� 248 M0994 256 ML55LH����������������������� 224 ML55LH 248 LJ62030R�������������������� 87 U62030R KH30BK�������������������������� 87 307 307 KH3OBK KC804��������������������������� KC804 207 207 S12532������������������������� 256 512532 224 M0995�������������������������� 248 M0995 256 ML55RH-01���������������� 224 ML55RH-01 LJ63040L�������������������� 248 87 LJ63040L KH30SS��������������������������� 87 307 307 KH3OSS KC805��������������������������� KC805 207 207 S13022������������������������� 256 513022 224 M0996�������������������������� 248 M0996 256 ML55RH���������������������� 224 ML55RH 248 LJ63040R�������������������� 309 309 U63040R KH31SS������������������������ 307 KH31SS 307 KC806��������������������������� KC806 207 S1302296�������������������� 207 51302296 224 224 M0997�������������������������� M0997 258 258 ML60-01���������������������� ML60-01 U71520L5.... ........ ...... 248 248 LJ71520LS������������������ 309 KH32����������������������������� 309 307 KH32 KC807��������������������������� 307 KC807 207 207 S13032������������������������� 258 513032 224 M0998�������������������������� 248 M0998 ML60���������������������������� 258 224 ML60 LJ71520L�������������������� 248 308 LJ71520L KH34SS������������������������ 308 307 307 KH34SS KC808��������������������������� KC808 207 S1303296�������������������� 207 211 51303296 224 MSS410 M0999�������������������������� 248 M0999 211 MSS410����������������������� 224 248 LJ71520RS������������������ 308 U71520R5 KH35NW��������������������� 308 307 KH35NW 307 KC809��������������������������� KC809 207 207 S13052������������������������� 211 513052 224 M1000�������������������������� 248 M1000 211 MSS410M������������������� 224 M55410M LJ71520R�������������������� 248 308 LJ71520R KH35PW���������������������� 308 307 KH35PW KC810��������������������������� 307 KC810 207 207 S13532������������������������� 211 513532 224 M1001�������������������������� 248 M1001. MSS412����������������������� 211 224 MSS412 LJ71825L�������������������� 248 308 LJ71825L KH36NW��������������������� 308 307 KH36NW KC811��������������������������� 307 KC811 207 S14022������������������������� 207 211 514022 224 M1002�������������������������� 248 M1002 211 MSS412M������������������� 224 MSS412M LJ71825R�������������������� 248 308 LJ71825R KH36PW���������������������� 308 307 307 KH36PW KC812 KC812��������������������������� 207 207 S1402296�������������������� 211 51402296 224 M1003�������������������������� 248 M1003 MSS415����������������������� 211 224 M55415 LJ72030L�������������������� 248 120 LJ72030L KH37BK-01����������������� 120 307 KH37BK-01 KC813��������������������������� 307 KC813 207 S14032������������������������� 207 514032 224 MSS415M 224 M1004�������������������������� M1004 211 211 MSS415M������������������� 248 ........ ...... 248 LJ72030R�������������������� 120 U72030R...... KH37BK����������������������� 120 307 KH37BK KC814 KC814��������������������������� 307 207 207 S1403296�������������������� 211 51403296 224 M1005�������������������������� 248 M1005 211 MSS420����������������������� 224 M55420 LJ73040L�������������������� 248 87 LJ73040L KH38BK�������������������������� 87 307 307 KH38BK KC815��������������������������� KC815 207 207 S14052������������������������� 211 514052 224 M1008�������������������������� 248 M1008 211 MSS420M������������������� 224 M55420M 248 LJ73040R�������������������� 65 65 LJ73040R KH39BK-01�������������������� 307 KH39BK-01 307 KC816��������������������������� KC816 207 S15022������������������������� 207 211 515022 224 M1009�������������������������� 248 M1009 211 MSS615����������������������� 224 M55615 LJ81520L�������������������� 248 65 LJ81520L KH39BK�������������������������� 65 307 KH39BK KC817 KC817��������������������������� 307 207 207 S15032������������������������� 211 515032 224 M1010�������������������������� 248 M1010 MSS615M������������������� 211 224 MSS615M LJ81520R�������������������� 248 309 1_181520R KH40����������������������������� 309 307 KH40 KC818��������������������������� 307 KC818 207 S1503296�������������������� 207 211 51503296 224 M1012�������������������������� 248 M1012 211 MSS620����������������������� 224 MSS620 248 LJ81720L02��������������� 309 LJ81720L02 KH42����������������������������� 309 307 307 KH42 KC827 KC827��������������������������� 207 207 S15052������������������������� 211 515052 224 M1067�������������������������� 248 M1067 211 MSS620M������������������� 224 M55620M LJ81720L03��������������� 248 121 LJ81720L03 KH45����������������������������� 121 307 KH45 307 KC828��������������������������� KC828 207 S16022������������������������� 207 211 516022 224 MSS630 M7203�������������������������� 224 248 M7203 211 MSS630����������������������� 248 LJ81720LS02������������� 309 309 U81720LS02 KH50����������������������������� 307 KH50 KC829��������������������������� 307 KC829 207 S16032������������������������� 207 211 516032 263 ML02-02���������������������� 248 ML02-02 211 MSS630M������������������� 263 MSS630M LJ81720LS03������������� 248 87 LJ81720L503 KH55�������������������������������� 87 307 307 KH55 KC830��������������������������� KC830 207 207 S16052������������������������� 516052 263 263 ML02-02SS����������������� 248 ML02-0255 LJ81720LS LJ81720LS������������������ 248 307 307 KC831��������������������������� KC831 207 S17052������������������������� 207 517052 263 263 ML02-03���������������������� 248 ML02-03 248 LJ81720L�������������������� LJ81720L N N 307 307 KC832��������������������������� KC832 L L 207 S18052������������������������� 207 518052 263 263 ML02���������������������������� ML02 U81720R02 ......... ...... 248 248 LJ81720R02��������������� 307 KC833��������������������������� 307 KC833 206 206 S20764������������������������� 211 520764 211 NPSL41094���������������� 262 NPSL41094 262 ML05-01���������������������� 248 ML05-01 L800��������������������������������� 70 70 LJ81720R03 LJ81720R03��������������� 248 307 307 L800 KC834��������������������������� KC834 206 S21064������������������������� 206 211 521064 NPSL41294���������������� 211 262 NPSL41294 262 ML05���������������������������� ML05 70 70 L801��������������������������������� L801 248 LJ81720RS02������������� 248 U81720R502 307 307 KC835��������������������������� KC835 206 S21264������������������������� 206 211 521264 NPSL41295���������������� 211 262 NPSL41295 262 ML06-01���������������������� 248 ML06-01 70 L803��������������������������������� LJ81720RS03������������� 248 70 U81720R503 307 L803 KC836��������������������������� 307 KC836 206 S21564������������������������� 206 211 521564 NPSL41594���������������� 211 262 262 NP5IA1594 ML06���������������������������� ML06 58 58 LCEM501 LCEM501������������������������ 248 248 LJ81720RS������������������ U81720R5 307 307 KC837��������������������������� KC837 206 S30765������������������������� 206 211 530765 NPSL41595���������������� 211 262 NPSL41595 262 ML07���������������������������� ML07 58 58 LCEM502 LCEM502������������������������ 248 LJ81720R�������������������� 248 U81720R 307 307 KC838��������������������������� KC838 206 S30784������������������������� 206 211 530784 NPSL41596���������������� 211 262 NPSL41596 ML08���������������������������� 262 58 307 LCEM545 LCEM545������������������������ 248 248 ML08 58 LJ91520L LJ91520L�������������������� KC839��������������������������� 307 KC839 206 S31065������������������������� 206 211 531065 NPSL42094���������������� 211 NPSL42094 258 258 ML11CH���������������������� ML11CH 58 58 LCEM751 LCEM751������������������������ 248 U91520R...... ........ ......248 LJ91520R�������������������� 307 KC840��������������������������� 307 KC840 206 S31084������������������������� 206 211 531084 NPSL42095���������������� 211 258 NPSL42095 258 ML13CH-01���������������� 248 ML13CH-01 248 LJ123040L LJ123040L������������������ 248 LJ91525L LJ91525L�������������������� 248 307 307 KC841��������������������������� KC841 206 S3108496�������������������� 206 211 53108496 NPSL42096���������������� 211 258 258 NPSL42096 ML13CH���������������������� 248 ML13CH 248 LJ123040L5 LJ123040LS��������������� 248 248 LJ91525R LJ91525R�������������������� 307 KC842 307 KC842��������������������������� 206 S31165������������������������� 206 531165 260 260 ML14CH���������������������� ML14CH 248 248 U123040R LJ123040R������������������ 248 248 LJ92025LS������������������ U92025 LS 307 KC843��������������������������� 307 KC843 206 S31265������������������������� 206 531265 258 ML15CH���������������������� 258 248 ML15CH 248 P P LJ123040R5 LJ123040RS��������������� 248 248 LJ92025L LJ92025L�������������������� 307 307 KC853��������������������������� KC853 206 206 S31284������������������������� 531284 259 259 ML16SS-01����������������� 248 ML16SS-01 248 LJ124040L LJ124040L������������������ 248 LJ92025RS������������������ 248 LJ92025 RS 307 307 KC854��������������������������� KC854 310 P1016 P1016��������������������������� 310 206 S3128496�������������������� 206 53128496 259 259 ML16SS����������������������� ML16SS 248 LJ124040L5 LJ124040LS��������������� 248 248 248 U92025 R LJ92025R�������������������� 307 307 321 KC855��������������������������� KC855 P1020��������������������������� 321 206 S31565������������������������� 206 531565 259 P1020 259 ML17SST-01�������������� ML17SST-01 248 248 LJ124040R LJ124040R������������������ 248 U92030L ...... ........ ...... 248 LJ92030L�������������������� 307 321 KC856��������������������������� 307 KC856 P1020BK P1020BK��������������������� 321 206 S31584������������������������� 206 531584 259 259 ML17SST-02�������������� ML17SST-02 248 LJ124040R5 LJ124040RS��������������� 248 LJ92030R�������������������� 248 248 LJ92030R 307 307 KC857��������������������������� KC857 200 P1037 P1037��������������������������� 200 206 206 S3158496�������������������� 53158496 259 ML18SS����������������������� 259 ML18SS 248 LJ125050L LJ125050L������������������ 248 248 248 LJ92525L LJ92525L�������������������� 307 307 324 KC858��������������������������� KC858 P1050BK P1050BK��������������������� 324 206 S31784������������������������� 206 531784 261 261 ML19CH���������������������� ML19CH 248 248 LJ125050R LJ125050R������������������ 248 248 LJ92525R�������������������� U92525 R 307 324 KC859��������������������������� 307 KC859 P1050G������������������������ 324 261 P1050G 206 206 S32084������������������������� 532084 261 ML20P�������������������������� 248 ML2OP 248 LJ126060L������������������ 307 U126060L LJ93030LS������������������ 248 248 LJ93030LS KC860��������������������������� 307 KC860 P1050W����������������������� 324 265 P1050W 210 324 5410-30 S410-30����������������������� 210 265 ML21P-01������������������� ML21 P-01 248 248 U126060R LJ126060R������������������ 248 248 LJ93030L�������������������� LJ93030L 307 307 324 KC861��������������������������� KC861 265 P1051 BK P1051BK��������������������� 210 324 5410-48 S410-48����������������������� 210 265 ML21P�������������������������� ML21 P 248 248 LJ183040L LJ183040L������������������ 248 LJ93030RS������������������ 248 LJ93030R5 307 324 KC862��������������������������� 307 KC862 P1051W����������������������� 324 210 5410-72 S410-72����������������������� 210 265 P1051W ML22P-01������������������� 265 ML22P-01 248 248 LJ183040R LJ183040R������������������ 248 248 LJ93030R�������������������� LJ93030R 307 324 KC863��������������������������� 307 KC863...._ P1052BK.... P1052BK��������������������� 324 206 541074 S41074������������������������� 206 261 261 ML22P-05������������������� ML22P-05 248 248 LJ184050LS LJ184050LS��������������� 248 LJ94040L�������������������� 248 LJ94040L 307 307 324 KC864��������������������������� KC864 P1052W P1052W����������������������� 324 206 S41095������������������������� 206 541095 265 265 ML22P�������������������������� ML22P 248 LJ184050L LJ184050L������������������ 248 248 LJ94040R LJ94040R�������������������� 248 307 307 324 KC865��������������������������� KC865 P5051G������������������������ 324 210 5412-48 S412-48����������������������� 210 265 P5051G 265 ML23P-01������������������� ML23P-01 248 LJ184050R5 LJ184050RS��������������� 277 277 LSH2055��������������������� 248 LSH2055 307 324 KC866��������������������������� 307 KC866 P5052G������������������������ 324 210 5412-72 S412-72����������������������� 210 261 P5052G 261 ML23P-05������������������� ML23 P-05 248 U184050R LJ184050R������������������ 248
339
Index
SIERRA
340 340
we
rime
sNGINEERING Amr. ..1DUCTS
251 W210-01��������������������� 251 199 W210-01 T126������������������������������ 199 213 T126 SS72221-01���������������� 213 210 5572221-01. SS415-30��������������������� 210 206 55415-30 S63017������������������������� 206 206 563017 206 541274.. S41274������������������������� 251 251 W210-01GF���������������� 199 W210-01 GF 199 T126SS-10������������������ 208 T12655-10 208 SS72511���������������������� 210 5572511 210 SS415-72��������������������� 206 55415-72 206 S63018������������������������� 206 563018 206 S41295������������������������� 541295 251 W210-02��������������������� 251 199 W210-02 T126SS������������������������� 199 208 T12655 SS72515���������������������� 208 208 5572515 SS41595���������������������� 208 206 5541595 S6301896�������������������� 206 210 56301896 210 S415-30����������������������� 5415-30 252 W210-03��������������������� 252 199 199 W210-03 T126SST-10���������������� ST-10 208 T1265 SS72521���������������������� 208 208 5572521 SS4159596����������������� 208 206 554159596 S63019������������������������� 206 210 210 563019 S415-72����������������������� 5415-72 252 W210-10��������������������� 252 199 W210-10 T128-10����������������������� 199 208 T128-10 SS7252196����������������� 208 210 557252196 SS420-36��������������������� 210 207 55420-36 S63021������������������������� 207 206 206 563021 S41574������������������������� 541574 252 W210-20��������������������� 252 199 W210-20 T128������������������������������ 199 208 T128 SS73011���������������������� 208 210 5573011 SS420-72��������������������� 210 206 55420-72 S63511������������������������� 206 206 206 563511 S41595������������������������� 541595 251 251 W210���������������������������� 199 199 W210 T128SS-10������������������ 208 112855-10 208 SS73015���������������������� 208 5573015 208 SS42095���������������������� 206 5542095 206 S63515������������������������� 206 563515 206 S4159596�������������������� 54159596 251 W220-01��������������������� 251 199 W220-01 T128SS������������������������� 199 208 T12855 SS73021���������������������� 208 208 5573021 SS51015���������������������� 208 206 5551015 S63517������������������������� 206 210 563517 210 S420-72����������������������� 5420-72 251 W220-02��������������������� 251 199 W220-02 T128SST-10���������������� 199 208 1128551-10 SS7302196����������������� 208 208 557302196 SS51215���������������������� 208 206 5551215 S63518������������������������� 206 206 206 563518 S42074������������������������� 542074 251 W220���������������������������� 251 199 W220 T130-10����������������������� 199 208 T130-10 SS73521���������������������� 208 213 5573521 SS51315-01���������������� 213 207 5551315-01 S63521������������������������� 207 206 206 563521 S42095������������������������� 542095 253 W400-02��������������������� 253 T130������������������������������ 199 199 W400-02 208 T130 SS74011���������������������� 208 208 5574011 SS51515���������������������� 208 206 5551515 S64011������������������������� 206 206 564011 206 S51015������������������������� 551015 253 W400���������������������������� 253 199 199 W400 T130SS-10������������������ 208 208 113055-10 SS74015���������������������� 208 5574015 208 SS52015���������������������� 206 5552015 206 S64015������������������������� 206 564015 206 S51016������������������������� 551016 W401���������������������������� 253 253 199 W401 T130SS������������������������� 199 208 T13055 SS74021���������������������� 208 208 5574021 SS52515���������������������� 208 206 5552515 S64017������������������������� 206 206 564017 206 S51098������������������������� 551098 W405���������������������������� 253 253 199 199 W405 T130SST-10���������������� -10 208 1130551 SS75021���������������������� 208 208 5575021 SS53015���������������������� 208 206 5553015 S64018������������������������� 206 206 206 564018 S51215������������������������� 551215 254 W412-A01������������������ 254 199 W412-A01 T132-10����������������������� 199 208 1132-10 SS91521���������������������� 208 208 5591521 SS53515���������������������� 208 206 5553515 S64019������������������������� 206 206 206 564019 S51216������������������������� 551216 255 W412-A����������������������� 255 199 W412-A T132������������������������������ 199 208 1132 SS92021���������������������� 208 208 5592021 SS54015���������������������� 208 207 5554015 S64021������������������������� 207 206 564021 206 S51298������������������������� 551298 255 W412���������������������������� 255 199 199 W412 T132SS-10������������������ 208 113255-10 208 SS92521���������������������� 208 5592521 208 SS61015���������������������� 207 5561015 207 S71511������������������������� 571511 213 213 S51315-01������������������ 551315-01 255 255 W412SK����������������������� 199 W4125 K T132SS������������������������� 199 208 T13255 SS93021���������������������� 208 210 5593021 SS612-36��������������������� 210 207 55612-36 S71515������������������������� 207 206 571515 206 S51515������������������������� 551515 255 W413-A����������������������� 255 199 W413-A T132SST-10���������������� 199 208 T13255T-10 SS93521���������������������� 208 210 5593521 SS612-72��������������������� 210 207 55612-72 S71521������������������������� 207 206 206 571521 S51516������������������������� 551516 255 W413���������������������������� 255 327 327 W413 -81 -2 L 208 TMTM-81-2L�������������������� SS94021���������������������� 208 208 5594021 SS61211���������������������� 208 207 5561211 S72011������������������������� 207 206 206 572011 S51598������������������������� 551598 255 W413SK����������������������� 327 W4135 K 255 TM-81-2R�������������������� 327 209 TM-81-2R SST41095�������������������� 209 208 55T41095 SS61215���������������������� 208 207 5561215 S7201196�������������������� 207 206 206 57201196 S52015������������������������� 552015.. 253 253 W420���������������������������� W420 209 209 SST41295�������������������� 210 55141295 210 SS615-12��������������������� 207 55615-12 207 S72015������������������������� 206 572015 206 S5201596�������������������� 55201596 254 W422���������������������������� 254 W422 209 SST41595�������������������� 209 210 55141595 SS615-36��������������������� 210 207 55615-36 S72021������������������������� 207 206 572021 206 W W S52016������������������������� 552016 253 W425���������������������������� 253 W425 209 SST42095�������������������� 209 210 55142095 SS615-72��������������������� 210 207 55615-72 S7202196�������������������� 207 206 206 57202196 S52098������������������������� 552098 251 W100-01��������������������� 251 253 W426���������������������������� 253 W426 209 W100-01 SST61515�������������������� 209 208 55161515 SS61511���������������������� 208 213 5561511 S72221-01������������������ 213 206 206 572221-01 S52515������������������������� 552515 252 W100-10��������������������� 252 W427���������������������������� W427.... ........ .. ....... _....254 254 209 W100-10. 209 SST62015�������������������� 55162015 208 SS61515���������������������� 208 207 5561515 S72511������������������������� 207 572511 206 206 S52516������������������������� 552516 W100-20��������������������� 252 209 W100-20 254 W429���������������������������� 254 252 W429 SST62515�������������������� 209 208 55162515 SS6151596����������������� 208 207 556151596 S72515������������������������� 207 206 572515 206 S52598������������������������� 552598 W100���������������������������� 251 W430���������������������������� 255 251 W430 255 209 W100 SST63015�������������������� 209 208 55163015 SS61517���������������������� 208 207 5561517 S72521������������������������� 207 206 572521 206 S53015������������������������� 553015 W110-01��������������������� 251 255 255 W430SK����������������������� 251 W4305 K 209 W110-01 SST7202196��������������� 209 208 5517202196 SS61518���������������������� 208 207 5561518 S7252196�������������������� 207 206 206 57252196 S53016������������������������� 553016 W110-03��������������������� 252 252 W431���������������������������� 252 252 W431 209 W110-03 SST72021�������������������� 209 208 55172021 SS6151896����������������� 208 207 556151896 S73011������������������������� 207 206 206 573011 S53098������������������������� 553098 W110-10��������������������� 252 209 W110-10 252 W432���������������������������� 252 252 W432. SST7302196���������������. 209 208 5517302196 SS61519���������������������� 208 207 5561519 S73015������������������������� 207 206 573015 206 S53515������������������������� 553515 W110-20��������������������� 252 209 W110-20 255 W435���������������������������� 252 W435 255 209 SST73021�������������������� 208 55173021 208 SS61521���������������������� 207 5561521 207 S73021������������������������� 206 573021 206 S54015������������������������� 554015 251 W110���������������������������� W110 W436���������������������������� 255 251 W436 255 208 SS61711���������������������� 208 207 5561711 S7302196�������������������� 207 206 57302196 206 S61015������������������������� 561015 251 W120-01��������������������� 251 W120-01 210 SS620-12��������������������� 210 207 55620-12 S73521������������������������� 207 210 210 573521 S612-30����������������������� 5612-30 T T 252 W120-10��������������������� 252 W120-10 210 SS620-30��������������������� 210 207 55620-30 X X S74011������������������������� 207 210 210 574011 S612-48����������������������� 5612-48 252 252 W120-20��������������������� 198 W120-20 198 T110-10����������������������� 210 1110-10 SS620-48��������������������� 210 207 55620-48 S74015������������������������� 207 210 574015 210 S612-72����������������������� 5612-72 200 X123SS������������������������ 200 251 251 X12355 W120���������������������������� 198 198 W120 T110������������������������������ 210 T110 SS620-72��������������������� 210 207 55620-72 S74021������������������������� 207 206 574021 206 S61211������������������������� 561211 200 X12455 X124SS������������������������ 200 251 251 W130-01��������������������� 198 W130-01 198 T110SS-10������������������ 208 111055-10 SS62011���������������������� 208 207 5562011 S74521������������������������� 207 206 574521 206 S61215������������������������� 561215 28 252 X125-01 X125-01��������������������������28 252 W130-10��������������������� 198 W130-10 198 T110SS������������������������� 208 T11055 SS62015���������������������� 208 207 5562015 S75021������������������������� 207 206 206 575021 S6121596�������������������� 56121596 28 X125��������������������������������28 252 X125 W130-20��������������������� 252 198 W130-20 198 T110SST-10���������������� 208 T11055-1-1 0 208 SS6201596����������������� 207 556201596 S91521������������������������� 207 210 210 591521 S615-48����������������������� 5615-48 200 251 X127-03 X127-03����������������������� 200 251 W130���������������������������� 198 198 W130 T112-10����������������������� 208 1112-10 SS62017���������������������� 208 207 5562017 S92021������������������������� 207 210 592021 210 S615-72����������������������� 5615-72 188 X1400-03 X1400-03�������������������� 188 251 W140-01��������������������� 251 198 W140-01 T112������������������������������ 198 208 1112 SS62018���������������������� 208 207 5562018 S92521������������������������� 207 206 592521 206 S61511������������������������� 561511 188 251 X1400 X1400��������������������������� 188 251 W140-01GF���������������� 198 W140-01GF 198 T112SS-10������������������ 208 111255-10 SS6201896����������������� 208 207 556201896 S93021������������������������� 207 206 593021 206 S6151196�������������������� 56151196 188 251 X1401 X1401��������������������������� 188 251 W140-02��������������������� 198 W140-02 198 T112SS������������������������� 208 T11255 SS62019 ��������������������� 208 207 5562019 S93521������������������������� 207 206 206 593521 S61515������������������������� 561515 195 252 X1402-01 X1402-01�������������������� 195 W140-03��������������������� 252 198 W140-03 198 T112SST-10���������������� 208 1112551-10 208 ��������������������� SS62021 207 5562021 S94021������������������������� 207 206 206 594021 S6151596�������������������� 56151596 195 X1403-01 X1403-01�������������������� 195 252 252 W140-10��������������������� W140-10 198 198 T114-10����������������������� T114-10 SS62211-01���������������� 5562211-01.. ........ ...... 213 213 208 208 SS12022���������������������� 5512022 206 206 S61517������������������������� 561517 252 X1404-03 195 X1404-03�������������������� 195 W140-20��������������������� 252 198 W140-20 T114������������������������������ 198 208 208 1114 SS62511���������������������� 209 5562511 209 SS12032���������������������� 206 5512032 206 S61518������������������������� 561518 195 X1405-03 X1405-03�������������������� 195 251 251 W140���������������������������� 198 198 W140 T114SS-10������������������ 208 111455-10 SS62515���������������������� 208 208 5562515 SS12522 ��������������������� 208 206 5512522 206 S61519������������������������� 561519 191 X1406-01 X1406-01�������������������� 191 251 251 W160-01��������������������� 198 W160-01 198 T114SS������������������������� 208 T11455 SS62517���������������������� 208 208 5562517 SS13022���������������������� 208 207 207 5513022 S61521������������������������� 561521 190 251 X14075501 X1407SS01����������������� 190 W160-01GF���������������� 251 198 W160-01GF 198 T114SST-10���������������� 208 1114551-10 208 SS62518���������������������� 209 5562518 SS13032���������������������� 209 206 206 5513032 S61711������������������������� 561711 190 X1407SS���������������������� 190 251 251 X140755 W160-02��������������������� 198 W160-02 198 T116-10����������������������� 208 1116-10 SS62519���������������������� 208 209 5562519 SS1303296����������������� 209 206 206 551303296 S61715������������������������� 561715 190 252 X1407ZN X1407ZN��������������������� 190 W160-03��������������������� 252 198 W160-03 T116������������������������������ 198 208 208 1116 SS62521���������������������� 208 5562521 208 SS14022���������������������� 210 5514022 210 S620-30����������������������� 5620-30 252 252 W160-10��������������������� 198 W160-10 198 T116SS-10������������������ 210 111655-10 SS630-12��������������������� 210 209 55630-12 SS14032���������������������� 209 210 5514032 210 S620-48����������������������� 5620-48 252 W160-20��������������������� 252 198 W160-20 T116SS������������������������� 198 210 T11655 Y Y SS630-36��������������������� 210 209 55630-36 SS15032���������������������� 209 210 210 5515032 S620-72����������������������� 5620-72 251 W160���������������������������� 251 198 198 W160 T116SST-10���������������� 210 1116551-10 210 SS630-72��������������������� 209 55630-72 SS16032���������������������� 209 206 206 5516032 S62011������������������������� 562011 23 Y70102CH Y70102CH���������������������23 251 W170-01��������������������� 251 198 W170-01 T118-10����������������������� 198 208 1118-10 SS63011���������������������� 208 209 5563011 SS18032���������������������� 209 206 206 5518032 S62015������������������������� 562015 23 251 Y70102GP Y70102GP����������������������23 251 W170-01GF���������������� 198 W170-01GF 198 T118������������������������������ 208 1118 SS63015���������������������� 208 208 5563015 SS20764���������������������� 208 206 5520764 206 S6201596�������������������� 56201596 251 W170-02��������������������� 251 198 W170-02 T118SS-10������������������ 198 208 111855-10 SS6301596����������������� 208 208 556301596 SS21064���������������������� 208 206 5521064 206 S62017������������������������� 562017 252 W170-10��������������������� 252 198 W170-10 T118SS������������������������� 198 208 T11855 SS63017���������������������� 208 208 5563017 SS30765���������������������� 208 206 206 5530765 S62018������������������������� 562018 251 W170���������������������������� 251 198 198 W170 T118SST-10���������������� 208 1118551-10 208 SS63018���������������������� 208 5563018 SS30784���������������������� 208 206 206 5530784 S6201896�������������������� 56201896 251 251 W180-01��������������������� W180-01 199 199 T120-10����������������������� 1120-10 556301896 ... ........ ......208 208 SS6301896����������������� 208 SS31065���������������������� 208 5531065.._ 206 206 S62019������������������������� 562019 252 W180-10��������������������� 252 199 W180-10 T120������������������������������ 199 208 208 T120 SS63019���������������������� 208 5563019 208 SS31084���������������������� 207 5531084 207 S62021������������������������� 562021 252 252 W180-20��������������������� 199 199 W180-20 T120SS-10������������������ 208 112055-10 SS63021���������������������� 208 208 5563021 208 SS31165���������������������� 213 213 5531165 S62211-01������������������ 562211-01 251 W180���������������������������� 251 199 W180 T120SS������������������������� 199 208 T12055 SS63511���������������������� 208 208 5563511 SS31265���������������������� 208 210 210 5531265 S625-48����������������������� 5625-48 251 W190-01��������������������� 251 199 W190-01 199 T120SST-10���������������� 208 1120551-10 208 SS63515���������������������� 208 5563515 SS31284���������������������� 208 210 210 5531284 S625-72����������������������� 5625-72 251 251 W190-01GF���������������� 199 W190-01GF 199 T122-10����������������������� 208 1122-10 SS63521���������������������� 208 208 5563521 SS31565���������������������� 208 206 5531565 206 S62511������������������������� 562511 251 W190-02��������������������� 251 199 W190-02 T122������������������������������ 199 208 208 T122 SS64011���������������������� 208 5564011 208 SS31584���������������������� 206 5531584 206 S62515������������������������� 562515 252 252 W190-03��������������������� 199 W190-03 199 T122SS-10������������������ 208 112255-10 SS64015���������������������� 208 208 5564015 SS32084���������������������� 208 206 5532084 206 S62517������������������������� 562517 252 W190-10��������������������� 252 199 W190-10 T122SS������������������������� 199 208 T12255 SS64019���������������������� 208 210 5564019 SS410-12��������������������� 210 206 206 55410-12 S62518������������������������� 562518 252 W190-20��������������������� 252 199 W190-20 199 T122SST-10���������������� 208 1122551 -10 208 SS64021���������������������� 210 5564021 SS410-30��������������������� 210 206 206 55410-30 S62519������������������������� 562519 251 251 W190���������������������������� 199 199 W190 T124-10����������������������� 208 1124-10 SS71515���������������������� 208 210 5571515 SS410-72��������������������� 210 207 55410-72. 207 S62521������������������������� 562521 251 W200-01��������������������� 251 199 W200-01 T124������������������������������ 199 208 208 1124 SS71521���������������������� 208 5571521 208 SS41095���������������������� 210 5541095 210 S630-48����������������������� 5630-48 251 251 W200-01GF���������������� 199 W200-01GF 199 T124SS-10������������������ 208 112455-10 SS72011���������������������� 208 208 5572011 SS4109596����������������� 208 210 554109596 210 S630-72����������������������� 5630-72 251 W200-02��������������������� 251 199 W200-02 T124SS������������������������� 199 208 T12455 SS72015���������������������� 208 210 5572015 SS412-36��������������������� 210 206 206 55412-36 S63011������������������������� 563011 252 W200-20��������������������� 252 199 W200-20 199 T124SST-10���������������� 208 1124551 -10 208 SS72021���������������������� 210 5572021 SS412-72��������������������� 210 206 206 55412-72 S63015������������������������� 563015 251 251 W200���������������������������� 199 199 W200 T126-10����������������������� 208 SS7202196����������������� 208 557202196 _ ........ —... 208 1126-10 SS41295���������������������� 208 206 5541295.._ 206 S6301596�������������������� 56301596 Download Download
www.spep.com @ www.spep.com
:) ()MODELS @
Hinges and Hinges and Industrial industrial Hardware Hardware
METRIC METRIC TO INCH CONVERSION
INCH DECIMAL DECIMAL MM INCH MM
INCH INCH
DECIMAL DECIMAL
MM MM
MM MM
INCH INCH
MM MM
INCH INCH
MM MM
INCH INCH
1/64 1/64
.015625 .015625
.39688 .39688
33/64 33/64
.515625 .515625
13.09688 13.09688
1 1
0.039370 0.039370
34 34
1.338583 1.338583
67 67
2.637795 2.637795
1/32 1/32
.03125 .03125
.79375 .79375
17/32 17/32
.53125 .53125
13.49375 13.49375
2 2
0.078740 0.078740
35 35
1.377953 1.377953
68 68
2.677165 2.677165
3/64 3/64
.046875 .046875
1.19063 1.19063
35/64 35/64
.546875 .546875
13.89063 13.89063
3 3
0.118110 0.118110
36 36
1.417323 1.417323
69 69
2.716535 2.716535
1/16 1/16
.0625 .0625
1.58750 1.58750
9/16 9/16
.5625 .5625
14.28750 14.28750
4 4
0.157480 0.157480
37 37
1.456693 1.456693
70 70
2.755906 2.755906
5/64 5/64
.078125 .078125
1.98438 1.98438
37/64 37/64
.578125 .578125
14.68438 14.68438
5 5
0.196850 0.196850
38 38
1.496063 1.496063
71 71
2.795276 2.795276
3/32 3/32
.09375 .09375
2.38125 2.38125
19/32 19/32
.59375 .59375
15.08125 15.08125
6 6
0.236220 0.236220
39 39
1.535433 1.535433
72 72
2.834646 2.834646
7/64 7/64
.109375 .109375
2.77813 2.77813
39/64 39/64
.609375 .609375
15.47813 15.47813
7 7
0.275591 0.275591
40 40
1.574803 1.574803
73 73
2.847015 2.847015
1/8 1/8
.125 .125
3.17500 3.17500
5/8 5/8
.625 .625
15.87500 15.87500
8 8
0.314961 0.314961
41 41
1.614173 1.614173
74 74
2.913386 2.913386
9/64 9/64
.140625 .140625
3.57188 3.57188
41/64 41/64
.640625 .640625
16.27188 16.27188
9 9
0.354331 0.354331
42 42
1.653543 1.653543
75 75
2.952756 2.952756
5/32 5/32
.15625 .15625
3.9687 3.9687
21/32 21/32
.65625 .65625
16.66875 16.66875
10 10
0.393701 0.393701
43 43
1.692913 1.692913
76 76
2.992126 2.992126
11/64 11/64
.171875 .171875
4.36563 4.36563
43/64 43/64
.671575 .671575
17.06563 17.06563
11 11
0.433071 0.433071
44 44
1.732283 1.732283
77 77
3.031496 3.031496
3/16 3/16
.1875 .1875
4.7625 4.7625
11/16 11/16
.6875 .6875
17.46250 17.46250
12 12
0.472441 0.472441
45 45
1.771654 1.771654
78 78
3.070866 3.070866
13/64 13/64
.203125 .203125
5.15938 5.15938
45/64 45/64
.703125 .703125
17.85938 17.85938
13 13
0.511811 0.511811
46 46
1.811024 1.811024
79 79
3.110236 3.110236
7/32 7/32
.21875 .21875
5.55625 5.55625
23/32 23/32
.71875 .71875
18.25625 18.25625
14 14
0.551181 0.551181
47 47
1.850391 1.850391
80 80
3.149606 3.149606
15/64 15/64
.234375 .234375
5.95313 5.95313
47/64 47/64
.734375 .734375
18.65312 18.65312
15 15
0.590551 0.590551
48 48
1.889764 1.889764
81 81
3.188976 3.188976
1/4 1/4
.250 .250
6.3500 6.3500
3/4 3/4
.750 .750
19.0500 19.0500
16 16
0.629921 0.629921
49 49
1.929134 1.929134
82 82
3.228346 3.228346
17/64 17/64
.265625 .265625
6.74688 6.74688
49/64 49/64
.765625 .765625
19.44688 19.44688
17 17
0.669291 0.669291
50 50
1.968504 1.968504
83 83
3.267717 3.267717
9/32 9/32
.28125 .28125
7.14375 7.14375
25/32 25/32
.78125 .78125
19.84375 19.84375
19/64 19/64
.296875 .296875
7.54063 7.54063
51/64 51/64
.796875 .796875
20.24063 20.24063
5/16 5/16
.3125 .3125
7.93750 7.93750
13/16 13/16
.8125 .8125
20.63750 20.63750
21/64 21/64
.328125 .328125
8.33438 8.33438
53/64 53/64
.828125 .828125
21.03438 21.03438
11/32 11/32
.34375 .34375
8.73125 8.73125
27/32 27/32
.84375 .84375
21.43125 21.43125
23/64 23/64
.359375 .359375
9.12813 9.12813
55/64 55/64
.859375 .859375
21.8281 21.8281
3/8 3/8
.375 .375
9.5250 9.5250
7/8 7/8
.875 .875
22.22500 22.22500
25/64 25/64
.390625 .390625
9.92188 9.92188
57/64 57/64
.890625 .890625
22.62188 22.62188
13/32 13/32
.40625 .40625
10.31875 10.31875
29/32 29/32
.90625 .90625
23.01875 23.01875
27/64 27/64
.421875 .421875
10.71563 10.71563
59/64 59/64
.921875 .921875
23.41563 23.41563
7/16 7/16
.4375 .4375
11.11250 11.11250
15/16 15/16
.9375 .9375
23.81250 23.81250
29/64 29/64
.453125 .453125
11.50938 11.50938
61/64 61/64
.953125 .953125
24.2093 24.2093
15/32 15/32
.46875 .46875
11.90625 11.90625
31/32 31/32
.96875 .96875
24.60625 24.60625
.984375 .984375
25.00313 25.00313
1.0000 1.0000
25.40000 25.40000
31/64 31/64
.484375 .484375
12.30313 12.30313
63/64 63/64
1/2 1/2
.500 .500
12.7000 12.7000
1 1
18 18
0.708661 0.708661
51 51
2.007874 2.007874
84 84
3.307087 3.307087
19 19
0.748031 0.748031
52 52
2.047244 2.047244
85 85
3.346457 3.346457
20 20
0.787402 0.787402
53 53
2.086614 2.086614
86 86
3.385827 3.385827
21 21
0.826772 0.826772
54 54
2.125984 2.125984
87 87
3.425197 3.425197
22 22
0.866142 0.866142
55 55
2.165354 2.165354
88 88
3.464567 3.464567
23 23
0.905512 0.905512
56 56
2.204724 2.204724
89 89
3.503937 3.503937
24 24
0.944882 0.944882
57 57
2.244094 2.244094
90 90
3.543307 3.543307
25 25
0.984252 0.984252
58 58
2.283465 2.283465
91 91
3.582677 3.582677
26 26
1.023622 1.023622
59 59
2.322835 2.322835
92 92
3.622047 3.622047
27 27
1.062992 1.062992
60 60
2.362205 2.362205
93 93
3.661417 3.661417
28 28
1.102362 1.102362
61 61
2.401575 2.401575
94 94
3.700787 3.700787
29 29
1.141732 1.141732
62 62
2.440945 2.440945
95 95
3.740157 3.740157
30 30
1.181102 1.181102
63 63
2.480315 2.480315
96 96
3.779528 3.779528
31 31
1.220472 1.220472
64 64
2.519685 2.519685
97 97
3.818898 3.818898
32 32
1.259843 1.259843
65 65
2.559055 2.559055
98 98
3.858268 3.858268
33 33
1.299213 1.299213
66 66
2.598425 2.598425
99 99
3.897638 3.897638
Equivalent Charts
INCH FRACTIONS, DECIMAL AND METRIC EQUIVALENTS
STANDARD GAUGE, DECIMAL AND AND METRIC METRIC EQUIVALENT EQUIVALENT STANDARD GAUGE, DECIMAL GAUGE GAUGE
DECIMAL DECIMAL
METRIC METRIC
GAUGE GAUGE
DECIMAL DECIMAL
METRIC METRIC
GAUGE GAUGE
DECIMAL DECIMAL
METRIC METRIC
GAUGE GAUGE
DECIMAL DECIMAL
METRIC METRIC
3 3
.250 .250
6.35 6.35
9 9
.150 .150
3.81 3.81
15 15
.070 .070
1.78 1.78
21 21
.034 .034
.87 .87
4 4
.234 .234
5.95 5.95
10
.135
3.43
16
.060 .060
1.52
22
.030 .030
.76 .76
5 5
.219 .219
5.56 5.56
11 11
.120 .120
3.05 3.05
17 17
.056 .056
1.42 1.42
23 23
.028 .028
.71 .71
6 6
.194 .194
4.93 4.93
12
.105
2.67
18 18
.048 .048
1.22 1
24
.025 .025
.64 .1111
7 7
.180 .180
4.57 4.57
13 13
.090 .090
2.29 2.29
19 19
.042 .042
1.07 1.07
25 25
.020 .020
.51 .51
8 8
.165 .165
4.19 4.19
14
.074
1.88
20 20
.035 .035
.89
26
.019 .019
.48
To Place 800.433.5554 OM
[email protected] [email protected] 341 To PlaceOrder: Order ta 800.433.5554 341
Product Organizer
SIERRA PACIFIC ENGINEERING AND PRODUCTS
342 342
An easy way for for you you to to keep keep track track of An easy way of all all the the SPEP SPEP products products you you use use YOUR PART YOUR PART 1 NUMBER NUMBER
DESCRIPTION DESCRIPTION
Download 3DmoDELs@ @www.spep.com Download www.spep.com
1
SPEP PART CATALOG PEP PART ALOG QUANTITY QUANTITY I NUMBER I PAGE NUMBER I SNUMBER PAGE CATNUMBER
PRICE PRICE
DATE I DATE
Hinges and Hinges and Industrial industrial Hardware Hardware
Resale Certificate M fD
SIERRA PACIFIC ENGINEERING AND PRODUCTS
N
Date: Date.
DI
State laws resale certificate certificate on on file file for for all all companies companies that that we we conduct conduct State laws now now require require us us to to have have aa resale business with. Thank business with. Thank you you in in advance advance for for your your cooperation. cooperation. Exempt sales sales not not supported supported by by an an exemption exemption certificate Exempt certificate will will be be charged charged sales/use sales/use tax tax immediately. immediately.
fD fl fD -% or 3;
n
DI .4. fD
Please check check and and initial initial ifif taxable taxable Please Please mail mail or or fax fax completed completed form form to to Sierra Sierra Pacific Pacific Engineering Engineering and and Products. Products. Please Mail to: to: Mail
4041 Via Via Oro Oro Ave. Ave. 4041 Long Beach, Beach, CA CA 90810 Long 90810
Firm Name: Name: Firm
E-mail to: to:
[email protected] E-mail
[email protected] Fax to: to: (310) Fax (310)
608-7978 608-7978
City, State: State: City,
HEREBY CERTIFY: CERTIFY: II HEREBY That II hold •• That hold valid valid sellers sellers permit permit number: number Issued pursuit pursuit to to the the sale sale and and tax tax law; law; that that II am am in in the the business business of of selling: selling: •• Issued
That the the tangible tangible personal personal property property described described herein shall purchase purchase from from •• That herein which which II shall SIERRA PACIFIC PACIFIC ENGINEERING ENGINEERING AND AND PRODUCTS PRODUCTS will will be be resold resold by by me me in in the the SIERRA form of of tangible tangible personal personal property; property; PROVIDED, PROVIDED, however, such form however, that that in in the the event event of of such property used for for any any purpose purpose other other than than retention, retention, demonstration, demonstration, or or display display property is is used while holding holding itit for for sale sale in in the the regular regular course course of of business, business, itit is understood that while is understood that II am am required by by the the sales sales and and use use tax tax law law to to report required report and and pay pay for for the the tax, tax, measured measured by by the the purchase price of of such such property. property. purchase price Description of of property property to to be be sold: sold: •• Description By and and Title: Title: By
Phone: Phone:
Address: Address: Signature: Signature:
A To Place 800.433.5554 IN
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
343 343
Credit Application and Agreement
SIERRA PACIFIC ENGINEERING AND PRODUCTS
SIERRA PACIFIC =11111111111=
PHONE (310) (310) 608-0693 608-0693 PHONE E-MAIL
[email protected] [email protected] E-MAIL FAX (310) 608-0952 FAX (310) 608-0952
COMPANY DETAILS DETAILS COMPANY
ESTIMATED MAXIMUM CREDIT ESTIMATED MAXIMUM CREDIT REQUESTED PER PER MONTH MONTH REQUESTED
[[ REQUIRED REQUIRED] ]
(BUILDING/OFFICE BUILDING/OFFICE DUNS # # DUNS
ADDRESS ADDRESS
CITY CITY
PH. # # PH.
FAX # # FAX
STATE STATE
ZIP ZIP
E-MAIL E-MAIL
A CONTROLLER CONTROLLER
NAMES NAMES FULL NAME FULL NAME
INDIVIDUAL 4 INDIVIDUAL
LEASED 4 LEASED
TYPE OF OF TYPE BUSINESS BUSINESS
PRESIDENT PRESIDENT
ID # ID #
RENT 4 RENT
YEAR YEAR ESTABLISHED ESTABLISHED
RESALE # # RESALE Please attach or fax a copy of current Resale Card with this completed application
PARTNERSHIP 4 PARTNERSHIP
DATE DATE
PLEASE NOTE: PLEASE INCLUDE INCLUDE YOUR YOUR PLEASE NOTE: WE WE CHECK CHECK CREDIT CREDIT VIA VIA E-MAIL. E-MAIL. PLEASE E-MAIL ADDRESS ADDRESS AND AND FAX FAX NUMBER BANK) ON ON THIS THIS APPLICATION. APPLICATION. E-MAIL NUMBER (INCLUDING (INCLUDING BANK)
COMPANY COMPANY NAME NAME
CORPORATION 4 CORPORATION
$
SS# SS#
ADDRESS ADDRESS
CITY CITY
PH. # # PH.
FAX # FAX #
STATE STATE
ZIP ZIP
STATE STATE
ZIP ZIP
NON-TAXABLEGOVERNMENT GOVERNMENT AGENCY AGENCY 4 NON-TAXABLE
BANK DETAILS DETAILS (Business BANK (Business Accounts Accounts Only) Only) NAME NAME
ACCOUNT # # ACCOUNT
ADDRESS ADDRESS
CITY CITY
PH. # # PH.
FAX # FAX #
Please accept accept this this signature signature and and account account number number as to release release Please as authorization authorization to the requested requested account account information Sierra Pacific Pacific Engineering Engineering & & Products. Products. the information to to Sierra
X
Authorized Signature
REFERENCES (Please references) REFERENCES (Please list list 4 4 current current suppliers suppliers for for references) NAME NAME
NAME NAME
ADDRESS ADDRESS
ADDRESS ADDRESS
CITY CITY
STATE STATE
CITY CITY
ZIP ZIP
E-MAIL E-MAIL
STATE STATE
ZIP ZIP
E-MAIL E-MAIL
PH. # # PH.
4
FAX. # # FAX.
PH. # PH. #
NAME NAME
NAME NAME
ADDRESS ADDRESS
ADDRESS ADDRESS
CITY CITY
STATE STATE
ZIP ZIP
FAX. # # FAX.
CITY CITY
E-MAIL E-MAIL
STATE STATE
A
ZIP ZIP
E-MAIL E-MAIL
PH. # # PH.
FAX. # # FAX.
APPROVAL DETAILS DETAILS APPROVAL
PH. # PH. #
FAX. # # FAX.
[[ REQUIRED REQUIRED] ]
PAYMENT PAYMENT APPROVER APPROVER PURCHASING PURCHASING CONTACT CONTACT
PH. # # PH.
E-MAIL E-MAIL
ACCT. PAYABLE PAYABLE ACCT. CONTACT PH. # # E-MAIL CONTACT PH. E-MAIL The information information contained contained in this application application is is for for the the purpose purpose of of obtaining obtaining credit credit and and is is warranted warranted to to be be true. true. I/We I/We hereby hereby authorized authorized SPEP SPEP to my/our The in this to investigate investigate the the references references listed listed pertaining pertaining to to my/our financial responsibility. responsibility. financial The undersigned undersigned agrees agrees to to the the terms guarantees to to SPEP SPEP the The terms on on the the invoice invoice and and unconditionally unconditionally guarantees the payment payment of of all all invoices invoices withing withing the the terms terms and and conditions conditions of of sale, sale, and and further further agrees agrees to to pay pay all all finance finance charges, collection, collection, legal legal expenses expenses and and attorney attorney fees fees (including (including fees fees incurred incurred in in appeal), appeal), between between them them shall shall be be solely solely in in Los Los Angeles Angeles County, County, California. charges, California.
X
X
344 344
Authorized Signature
Download www.spep.com Download3DmoDELs @ @ www.spep.com
Printed Name
Title
Date
A
Hinges and Hinges and Industrial industrial Hardware Hardware
Facility Maps & Directions
-n
DI
LOS ANGELES ANGELES FACILITY FACILITY •• Long Long Beach, Beach, CA CA LOS
CALL IN IN ADVANCE CALL ADVANCE BEFORE BEFORE YOU YOU COME COME VISIT VISIT US. US. NO COUNTER COUNTER SALES. SALES. PHONE PHONE ORDERS ORDERS ONLY. ONLY. NO
4041 4041 Via Via Oro Oro Ave., Ave., Long Long Beach, Beach, CA CA 90810 90810
NORTH NORTH .171117
E. Del Del Amo E. Amo Blvd. Blvd.
Via O ro
Ave.
39
Alame
da St.
Santa
Fe Av e
.
SPE
ch Blvd.
4 TO LOS LOS ANGELES TO ANGELES
Long Bea
710
Hug h
From the the 110 110 Fwy: Fwy: Take Take the the 110 110 Fwy 405 Fwy Fwy From Fwy to to the the 405 South. Exit Exit on on Alameda St. Turn South. Alameda St. Turn left left at at the the bottom bottom of of the the off-ramp. Go 1/4 1/4 mile mile and and turn turn left left on on Santa Santa Fe Fe Ave. off-ramp. Go Ave. Go Go 1/2 St. Make Make a a left left on on Via Via 1/2 mile mile and and turn turn right right on on Carson Carson St. Oro Oro Ave. Ave.
Way es
Way Warnock
Wa rd
•
Southbound Fwy: Exit Exit on on Alameda Alameda St. St. Turn Turn left left Southbound 405 405 Fwy: at the the bottom bottom of of the the off-ramp. off-ramp. Go at Go 1/4 1/4 mile mile and and turn turn left left on Santa Fe Fe Ave. on Santa Ave. Go Go 1/2 1/2 mile mile and and turn turn right right on on Carson Carson Street. make make a a left left on on Via Via Oro Oro Ave. Street. Ave. Northbound 405 Fwy: Exit Exit on on Alameda Alameda St. St. and and turn turn Northbound 405 Fwy: right at at the of the right the bottom bottom of the off-ramp. off-ramp. Turn Turn right right on on Carson Carson St. and and then then left left on on Via Via Oro Oro Ave. Ave. St.
0
Carson St. Carson
405
From the the 710 710 Fwy: Fwy: Take Take 710 710 Fwy Fwy to to 405 405 Fwy Fwy North. North. From Exit on on Alameda the bottom bottom of the Exit Alameda St. St. and and turn turn right right at at the of the off-ramp. left on on Via Via off-ramp. Turn Turn right right on on Carson Carson St. St. and and then then left Oro. Oro. Ave. Ave.
low
Rd
.
TO ORANGE ORANGE COUNTY CO NT TO
MAP NOT NOT TQYSCALE TO SCALE MAP
RD
-16
From Long From Long Beach Beach Airport: Airport: Take Take Lakewood Lakewood Ave. Ave. south. south. Enter 405 and turn turn Enter 405 Fwy Fwy North North and and exit exit on on Alameda Alameda St. St. and right on on Carson Carson St. St. and and then then left left on on Via Via Oro Oro Ave. right Ave.
CHICAGO FACILITY FACILITY •• Bolingbrook, Bolingbrook, IL IL CHICAGO
2986 S. Longhorn Drive, Lancaster, TX TX 75134 75134
1 Gateway Gateway Court, 1 Court, Bolingbrook, Bolingbrook, IL IL 60440 60440
NORTH NORTH
DI
7:1
From LAX: Take Take the Fwy South South and and exit exit on on the 405 405 Fwy Alameda St. St. Turn Turn left bottom of of the the off-ramp. off-ramp. Go Alameda left at at the the bottom Go 1/4 left on on Santa Santa Fe Fe Ave. 1/4 mile mile and and turn turn left Ave. Go Go 1/2 1/2 mile mile and and turn right right on on Carson Carson St. St. Make Make a a left left on on Via Via Oro Oro Ave. Ave. turn
DALLAS FACILITY FACILITY •• Lancaster, Lancaster, TX DALLAS TX
From 1-20: I-20: Go Go south south on on Hwy Hwy 35E From 35E to to the the W. W. Wintergreen Wintergreen Road Exit Exit and and turn turn left. left. Turn Turn right right on on W. W. Longhorn Longhorn Dr. Dr. Road
IA
From 1-55: I-55: Exit Exit Hwy Hwy 53 53 (S. (S. Bolingbrook Bolingbrook Dr.) Dr.) and and go go From south. Turn W. Crossroads south. Turn right right on on W. Crossroads Pkwy Pkwy and and then then left left on Gateway Gateway Ct. Ct. The on your your right right hand hand on The building building will will be be on side at at the side the end end of of the the street. street.
TO DALLAS DALLAS TO
53
45 55
SPEP
W. Crossroads Pkwy.
y. kw
35E
53
e ep
ce
en
nd
.
vd
Bl
355
d
n .I
sP
ran
te Ve
S. Schmidt Rd.
S. S. Longhorn Longhorn Dr. Dr.
287
355
oli et Rd .
Fabrication Dr.
E. Longhorn Dr.
0
. Dr ay way Ct. tew Gate
67
55
Old Chicago Dr. Ga
W. Longhorn Dr.
W. Wintergreen Wintergreen Rd. Rd
TO CHICAGO
S. Bolingbrook Dr.
S. Schmidt Rd.
NORTH NORTH
20
N
53
MAP NOT NOT TO MAP TO SCALE SCALE
MAP NOT TO TO SCALE AP NOT S
To Place 800.433.5554 OM
[email protected] [email protected] To PlaceOrder: Order ta 800.433.5554
336