RC30 Vanair specs

RC40 HYDRAULIC 30-40 CFM ABOVEDECK RECIPROCATING AIR COMPRESSOR BID SPECIFICATIONS VA-050515 RC 40 Revised: Aug 2010 Typ...

0 downloads 51 Views 63KB Size
RC40 HYDRAULIC 30-40 CFM ABOVEDECK RECIPROCATING AIR COMPRESSOR BID SPECIFICATIONS VA-050515 RC 40 Revised: Aug 2010 Type:

Vanair RC40. New and in current production

Capacity:

30 to 40 CFM free air at 100 psig. Compressor to be capable of 90 to 175 PSIG operation

Compressor:

Vanair 40 cfm two stage reciprocating air compressor system with discharge check valve to reduce horsepower consumption during unloaded condition.

Input Speed:

Air compressor shall produce 40 CFM & 100 psig and 865 RPM compressor input speed

Hydraulic Motor:

Gear type hydraulic motor

Hydraulic Requirements:

CFM Air Pressure Hyd. Flow (GPM) Hyd. Press. (PSI)

30 100 125 150 175 11.3 gpm 11.3 gpm 11.3 gpm 11.3 gpm 1520 psi 1630 psi 1750 psi 1815 psi

CFM Air Pressure Hyd. Flow (GPM) Hyd. Press. (PSI)

40 100 125 150 175 14.3 gpm 14.3 gpm 14.3 gpm 14.3 gpm 1700 psi 1850 psi 1950 psi 2000 psi

Compressor Drive:

Air Compressor shall be belt driven with a 3V-Section belt design

Weight:

Compressor dry weight 408 Lbs.

Dimensions:

35L x 21W x 22H (Inches)

Air Intake Filters:

Heavy duty, dry-type air filters shall be provided for air compressor.

Instrument Panel:

Panel to include compressor air pressure gauge, hour meter and on/off switch

Protective Circuit:

Fuse protected electrical circuit

Hydraulic Cooler:

Hydraulic cooling system shall allow rated air delivery and pressure operation up to 125 degree Fahrenheit ambient temperatures. Cooler to be mounted in a powder coated galvanneal sheet metal enclosure with a blower type fan assembly. (No ABS plastic shrouding) Hydraulic cooler to operate continuously to provide hydraulic cooling flow to cooler when compressor is loaded or unloaded.

On/Off Control:

Compressor package to contain on/off solenoid valve to start and stop compressor according to air pressure, hydraulic pressure relief valve and directional safety valve to divert hydraulic oil back to reservoir for over-temperature or over-pressure conditions.

Mainframe and Enclosure:

Fully powder coated Galvanneal mainframe and sheet metal enclosure with full service access.

Warranty:

The reciprocating air compressor unit shall be warranted for 3 years against defects in materials and workmanship. The unit will be replaced or repaired at Vanair’s option as a result of such defects. This warranty does not cover damage caused by accident, misuse, or negligence. If the compressor unit is disassembled the warranty is void. All other are warranted for twelve months subject to the same conditions mentioned above.

Options:

Service Line moisture trap Hose reels Automatic/Manual or Electric rewind in various capacities and sizes OSHA excess flow valve 20/30/40 Gallon Air Reservoir Tank ½ inch moisture separator/regulator/filter

10896 W 300 North · Michigan City, IN. 46360 Phone: 219-879-5100 or 800-526-8817 FAX 219-879-5800 www.vanair.com