CS-4.waterproof-sealing
RS - 4.concrete primer
product data sheet
product data sheet
GENERAL
PERFORMANCE AND FEATURES
A solvent free 2 component defoamed epoxy coating based on
-
glosslevel
matt
bisphenol A-F resin for universal usage.
-
colour
transparent
The product is till a certain level tolerant to moisture and pol-
-
coverage
lutions by oils and fats.
average 6-8 m2 /liter ( 0.1 - 0.25 kg/m2 )
APPLICATION
ADVANTAGES
The to be treated surface should be dry, clean and free of oil
-
totally solvent free
fats and grease. The object temperature should be between
-
chemical resistance
12-30˚C and the air humidity < 85%. The product temperature
-
easy application
should be between 15-25˚C and minimum 3˚C above dewpoint.
-
good adhesion
USAGE
PRODUCT CHARACTERISTICS
Can be applied by brush, roller, wiper or tractor.
-
density
mix. approc. 1,05 kg/ltr
The surface should be sufficient pressure secured, minimum
-
solids
100 volume%
25 N/mm2, with a minimum adhesion strength of 1.5 N/mm2.
-
wet film thickness
150 micron ( by brush )
The surface moisture should be < 4%.
-
dry film thickness
150 micron
MIXING RATIO
DRYING TIME ( RH 55% - 20C )
The 2 components has to be mixed on weights.
-
dust dry
1 hour
-
-
passable
after 16 hours
The components should be mixed mechanically, using a step-
part A : part B = 695 grams : 305 grams
-
recoatable
in between 16-24 hours
less mixing machine.
-
application at 20˚
20 minutes
After mixing the product can be directly used.
-
total curing time
maximum 1 day
INSTRUCTIONS
ARTICLE DETAILS
The whisk of the mixer must have appropriate dimensions in
-
sustainability minimum 12 months
which content the guideline would be that the diameter
-
storage at temperature between 3-25˚ in the
should be 1/3 of the mixing bucket.
original packaging
During the application there should be sufficient ventilation
-
VOC-content 0 gr/ltr
for a fast and required uniform drying.
-
labelling UN-code 1263
CONSULTANCY
SAFETY INFORMATION
-
-
depending on the nature and conditions of the existing surface and its finish, we can advise the matching products and application method.
-
on hazardous substances -
to get further insight in HSSE-legislations and regulations please feel free to contact us.
in agreement with the EU directives 1907/2006 harmful and irratant by inhalation, skin and eye contact
-
in contact with eyes, rinse immediately wit water
powered by Prokol Netherlands
