Parker O-Ring Handbook
Parker Series 5-XXX O-Ring Sizes
Sizes
The following 5-XXX sizes are O-rings of nonstandard dimensions for which Parker tooling was available as of January 1, 2007. This tooling will be maintained while volume demand continues. A mold scrapped as defective will not be replaced unless demand justifies the expense.
Note: These molds are cut to allow for standard “AN” shrinkage, and in materials having standard shrinkage they will normally produce rings to the dimensions listed. Materials with other than standard shrinkage will give different dimensions and tolerances. Please consult the factory or your local Parker Distributor for the availability of special sizes not included in this list as of this writing.
Parker Series 5-XXX O-Ring Sizes Std 5-Size
I.D.
5-118 5-187 5-051 5-101 5-578 5-632 5-102 5-178 5-683 5-646 5-103 5-190 5-579 5-669 5-148 5-105 5-106 5-580 5-193 5-108 5-124 5-107 5-125 5-581 5-685 5-582 5-194 5-638 5-179 5-151 5-127 5-1002 5-197 5-180 5-686 5-583 5-052 5-202 5-698 5-584 5-687 5-1004 5-056 5-710 5-673
.059 .070 .070 .100 .102 .110 .116 .120 .122 .126 .128 .132 .133 .146 .154 .154 .154 .165 .176 .176 .176 .176 .180 .192 .208 .224 .228 .233 .239 .239 .239 .239 .242 .248 .248 .251 .270 .278 .283 .283 .287 .290 .301 .301 .305
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.004 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005
.003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .005 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003
5-118 5-187 5-051 5-101 5-578 5-632 5-102 5-178 5-683 5-646 5-103 5-190 5-579 5-669 5-148 5-105 5-106 5-580 5-193 5-108 5-124 5-107 5-125 5-581 5-685 5-582 5-194 5-638 5-179 5-151 5-127 5-1002 5-197 5-180 5-686 5-583 5-052 5-202 5-698 5-584 5-687 5-1004 5-056 5-710 5-673
1.50 1.78 1.78 2.54 2.59 2.79 2.95 3.05 3.10 3.20 3.25 3.35 3.39 3.71 3.91 3.91 3.91 4.19 4.47 4.47 4.47 4.47 4.57 4.88 5.28 5.69 5.79 5.92 6.07 6.07 6.07 6.07 6.15 6.30 6.30 6.38 6.86 7.06 7.19 7.19 7.29 7.39 7.65 7.65 7.75
.040 .036 .040 .038 .074 .040 .038 .040 .063 .040 .050 .070 .074 .040 .038 .050 .066 .074 .040 .050 .056 .066 .040 .074 .094 .074 .040 .076 .040 .051 .074 .174 .040 .048 .094 .074 .070 .046 .040 .074 .094 .045 .038 .054 .074
Millimeters Tol ± W
0.10 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13
1.02 0.91 1.02 0.97 1.88 1.02 0.97 1.02 1.60 1.02 1.27 1.78 1.88 1.02 0.97 1.27 1.68 1.88 1.02 1.27 1.42 1.68 1.02 1.88 2.39 1.88 1.02 1.93 1.02 1.30 1.88 4.42 1.02 1.22 2.39 1.88 1.78 1.17 1.02 1.88 2.39 1.14 0.97 1.37 1.88
Tol ±
Std 5-Size
I.D.
.08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .13 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08
5-204 5-205 5-160 5-712 5-585 5-664 5-1006 5-206 5-1007 5-133 5-612 5-586 5-587 5-018 5-699 5-700 5-716 5-057 5-209 5-211 5-212 5-614 5-718 5-134 5-588 5-002 5-215 5-218 5-682 5-058 5-613 5-1011 5-222 5-223 5-225 5-615 5-652 5-726 5-566 5-230 5-231 5-675 5-616 5-1014 5-135
.312 .312 .312 .313 .314 .320 .322 .326 .330 .332 .344 .350 .350 .352 .353 .354 .362 .364 .370 .375 .384 .391 .395 .410 .413 .416 .418 .425 .426 .426 .437 .447 .455 .458 .469 .469 .473 .484 .489 .500 .501 .508 .516 .525 .526
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .006 .006 .006 .006 .006 .006 .006 .006 .006 .007 .007
.003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .004 .004 .003 .004 .004 .003 .003 .005 .003 .003 .003 .003 .004 .003 .003 .003 .003 .003 .003 .003 .004 .003 .003 .003 .003 .003 .003 .004 .003 .003 .003 .003 .003
5-204 5-205 5-160 5-712 5-585 5-664 5-1006 5-206 5-1007 5-133 5-612 5-586 5-587 5-018 5-699 5-700 5-716 5-057 5-209 5-211 5-212 5-614 5-718 5-134 5-588 5-002 5-215 5-218 5-682 5-058 5-613 5-1011 5-222 5-223 5-225 5-615 5-652 5-726 5-566 5-230 5-231 5-675 5-616 5-1014 5-135
7.92 7.92 7.92 7.95 7.98 8.13 8.18 8.28 8.38 8.43 8.74 8.89 8.89 8.94 8.97 8.99 9.19 9.25 9.40 9.53 9.75 9.93 10.03 10.41 10.49 10.57 10.62 10.80 10.82 10.82 11.10 11.35 11.56 11.63 11.91 11.91 12.01 12.29 12.42 12.70 12.73 12.90 13.11 13.34 13.36
.036 .092 .103 .051 .074 .070 .070 .103 .050 .031 .070 .074 .106 .113 .094 .118 .118 .045 .040 .187 .070 .103 .040 .031 .106 .059 .094 .025 .040 .050 .070 .103 .128 .053 .094 .103 .071 .056 .055 .125 .062 .049 .103 .071 .031
Millimeters Tol ± W
0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.18 0.18
0.91 2.34 2.62 1.30 1.88 1.78 1.78 2.62 1.27 0.79 1.78 1.88 2.69 2.87 2.39 3.00 3.00 1.14 1.02 4.75 1.78 2.62 1.02 0.79 2.69 1.50 2.39 0.64 1.02 1.27 1.78 2.62 3.25 1.35 2.39 2.62 1.80 1.42 1.40 3.18 1.57 1.24 2.62 1.80 0.79
Tol ±
.08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .08 .10 .10 .08 .10 .10 .08 .08 .13 .08 .08 .08 .08 .10 .08 .08 .08 .08 .08 .08 .08 .10 .08 .08 .15 .08 .08 .08 .10 .08 .08 .08 .08 .08
(a) The rubber compound must be added when ordering by the 5-size number (i.e., N0674-70 5-007). (b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table
9-12
Parker Hannifin Corporation • O-Ring Division 2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 • Fax: (859) 335-5128 www.parkerorings.com
Parker O-Ring Handbook
Parker Series 5-XXX O-Ring Sizes (Continued) I.D.
5-162 5-239 5-156 5-563 5-735 5-736 5-591 5-609 5-242 5-021 5-243 5-676 5-247 5-248 5-617 5-250 5-251 5-005 5-136 5-643 5-252 5-254 5-743 5-592 5-256 5-594 5-257 5-593 5-181 5-964 5-263 5-264 5-266 5-137 5-595 5-006 5-751 5-003 5-596 5-708 5-753 5-049 5-273 5-022 5-138 5-597 5-598 5-278 5-139 5-709 5-677 5-279 5-761 5-618 5-599
.554 .570 .575 .583 .583 .590 .594 .600 .600 .603 .604 .610 .623 .625 .625 .627 .631 .640 .643 .650 .652 .660 .660 .665 .707 .720 .722 .724 .725 .744 .750 .752 .766 .775 .779 .796 .820 .836 .838 .850 .857 .871 .879 .890 .898 .905 .968 .979 .987 1.000 1.004 1.004 1.010 1.016 1.031
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .007 .008 .008 .008 .008 .008 .008 .008 .008 .008 .008 .008 .008 .009 .009 .009 .009 .009 .009 .009 .009 .009 .009 .010 .010 .010 .010 .010 .010 .010 .010 .010
.003 .004 .003 .003 .003 .003 .004 .003 .004 .004 .003 .003 .004 .003 .003 .003 .003 .003 .003 .003 .003 .003 .004 .004 .003 .004 .004 .004 .003 .004 .003 .003 .003 .003 .004 .003 .005 .003 .004 .003 .004 .004 .003 .004 .003 .004 .004 .003 .003 .003 .003 .005 .003 .004 .004
5-162 5-239 5-156 5-563 5-735 5-736 5-591 5-609 5-242 5-021 5-243 5-676 5-247 5-248 5-617 5-250 5-251 5-005 5-136 5-643 5-252 5-254 5-743 5-592 5-256 5-594 5-257 5-593 5-181 5-964 5-263 5-264 5-266 5-137 5-595 5-006 5-751 5-003 5-596 5-708 5-753 5-049 5-273 5-022 5-138 5-597 5-598 5-278 5-139 5-709 5-677 5-279 5-761 5-618 5-599
14.07 14.48 14.61 14.81 14.81 14.99 15.09 15.24 15.24 15.32 15.34 15.49 15.82 15.88 15.88 15.93 16.03 16.26 16.33 16.51 16.56 16.76 16.76 16.89 17.96 18.29 18.34 18.39 18.42 18.90 19.05 19.10 19.46 19.69 19.79 20.22 20.83 21.23 21.29 21.59 21.77 22.12 22.33 22.61 22.81 22.99 24.59 24.87 25.07 25.40 25.50 25.50 25.65 25.81 26.19
.070 .106 .060 .040 .103 .070 .106 .094 .105 .125 .103 .058 .125 .050 .103 .062 .062 .080 .031 .045 .070 .064 .141 .106 .103 .141 .113 .106 .040 .109 .061 .070 .080 .031 .141 .080 .150 .059 .141 .045 .123 .140 .040 .125 .031 .141 .141 .103 .031 .055 .081 .218 .062 .139 .141
Millimeters Tol ± W
0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.23 0.23 0.23 0.23 0.23 0.23 0.23 0.23 0.23 0.23 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
1.78 2.69 1.52 1.02 2.62 1.78 2.69 2.39 2.67 3.18 2.62 1.47 3.18 1.27 2.62 1.57 1.57 2.03 0.79 1.14 1.78 1.63 3.58 2.69 2.62 3.58 2.87 2.69 1.02 2.77 1.55 1.78 2.03 0.79 3.58 2.03 3.81 1.50 3.58 1.14 3.12 3.56 1.02 3.18 0.79 3.58 3.58 2.62 0.79 1.40 2.06 5.54 1.57 3.53 3.58
Tol ±
Std 5-Size
I.D.
.08 .10 .08 .08 .08 .08 .10 .08 .10 .10 .08 .08 .10 .08 .08 .08 .08 .08 .08 .08 .08 .08 .10 .10 .08 .10 .10 .10 .08 .10 .08 .08 .08 .08 .10 .08 .13 .08 .10 .08 .10 .10 .08 .10 .08 .10 .10 .08 .08 .08 .08 .13 .08 .10 .10
5-004 5-763 5-600 5-140 5-601 5-291 5-1028 5-602 5-294 5-295 5-141 5-296 5-297 5-301 5-603 5-157 5-604 5-605 5-780 5-008 5-670 5-142 5-312 5-657 5-606 5-980 5-024 5-320 5-158 5-009 5-321 5-788 5-327 5-143 5-329 5-1018 5-330 5-671 5-025 5-035 5-1023 5-335 5-794 5-1042 5-795 5-9 81 5-011 5-337 5-1043 5-144 5-796 5-338 5-701 5-342 5-343
1.070 1.080 1.094 1.112 1.153 1.186 1.190 1.212 1.213 1.225 1.226 1.229 1.230 1.259 1.279 1.338 1.342 1.401 1.412 1.421 1.437 1.450 1.454 1.465 1.468 1.475 1.515 1.540 1.550 1.553 1.559 1.591 1.640 1.670 1.670 1.671 1.674 1.680 1.765 1.786 1.788 1.802 1.812 1.817 1.850 1.850 1.860 1.873 1.882 1.891 1.913 1.925 1.937 1.980 2.000
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.010 .010 .010 .010 .012 .012 .012 .012 .012 .012 .012 .012 .012 .012 .012 .012 .012 .014 .014 .014 .014 .014 .014 .014 .014 .014 .015 .015 .015 .015 .015 .015 .015 .015 .015 .015 .015 .015 .016 .016 .016 .016 .016 .016 .016 .016 .016 .016 .017 .017 .017 .017 .017 .017 .018
.003 .003 .004 .003 .004 .003 .006 .004 .004 .006 .003 .003 .005 .003 .004 .003 .004 .004 .003 .003 .003 .003 .004 .003 .004 .006 .004 .003 .003 .003 .004 .003 .004 .003 .003 .004 .005 .003 .004 .004 .003 .003 .003 .006 .003 .006 .003 .003 .004 .003 .003 .005 .004 .003 .003
5-004 5-763 5-600 5-140 5-601 5-291 5-1028 5-602 5-294 5-295 5-141 5-296 5-297 5-301 5-603 5-157 5-604 5-605 5-780 5-008 5-670 5-142 5-312 5-657 5-606 5-980 5-024 5-320 5-158 5-009 5-321 5-788 5-327 5-143 5-329 5-1018 5-330 5-671 5-025 5-035 5-1023 5-335 5-794 5-1042 5-795 5-981 5-011 5-337 5-1043 5-144 5-796 5-338 5-701 5-342 5-343
27.18 27.43 27.79 28.24 29.29 30.12 30.23 30.78 30.81 31.12 31.14 31.22 31.24 31.98 32.49 33.99 34.09 35.59 35.86 36.09 36.40 36.83 36.93 37.21 37.29 37.47 38.48 39.12 39.37 39.45 39.60 40.41 41.66 42.42 42.42 42.44 42.52 42.67 44.83 45.36 45.42 45.77 46.02 46.15 46.99 46.99 47.24 47.57 47.80 48.03 48.59 48.90 49.20 50.29 50.80
.065 .050 .141 .031 .141 .070 .250 .141 .149 .275 .031 .070 .197 .092 .141 .092 .141 .141 .073 .080 .070 .047 .105 .103 .141 .275 .125 .070 .092 .080 .139 .071 .139 .047 .070 .139 .210 .080 .125 .139 .070 .062 .070 .257 .070 .275 .080 .062 .118 .047 .070 .210 .139 .038 .075
Millimeters Tol ± W
0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.41 0.41 0.41 0.41 0.41 0.41 0.41 0.41 0.41 0.41 0.43 0.43 0.43 0.43 0.43 0.43 0.46
1.65 1.27 3.58 0.79 3.58 1.78 6.35 3.58 3.78 6.99 0.79 1.78 5.00 2.34 3.58 2.34 3.58 3.58 1.85 2.03 1.78 1.19 2.67 2.62 3.58 6.99 3.18 1.78 2.34 2.03 3.53 1.80 3.53 1.19 1.78 3.53 5.33 2.03 3.18 3.53 1.78 1.57 1.78 6.53 1.78 6.99 2.03 1.57 3.00 1.19 1.78 5.33 3.53 0.97 1.91
Tol ±
.08 .08 .10 .08 .10 .08 .15 .10 .10 .15 .08 .08 .13 .08 .10 .08 .10 .10 .08 .08 .08 .08 .10 .08 .10 .15 .10 .08 .08 .08 .10 .08 .10 .08 .08 .10 .13 .08 .10 .10 .08 .08 .08 .15 .08 .15 .08 .08 .10 .08 .08 .13 .10 .08 .08
Sizes
Std 5-Size
(a) The rubber compound must be added when ordering by the 5-size number (i.e., N0674-70 5-007). (b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table
Parker Hannifin Corporation • O-Ring Division 2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 • Fax: (859) 335-5128 www.parkerorings.com
9-13
Parker O-Ring Handbook
Sizes
Parker Series 5-XXX O-Ring Sizes (Continued) Std 5-Size
I.D.
5-655 5-037 5-346 5-642 5-1044 5-027 5-1046 5-145 5-347 5-348 5-800 5-1047 5-015 5-702 5-039 5-354 5-355 5-805 5-703 5-358 5-361 5-159 5-982 5-807 5-704 5-042 5-697 5-367 5-705 5-368 5-044 5-369 5-810 5-811 5-1052 5-374 5-557 5-813 5-815 5-045 5-816 5-819 5-984 5-821 5-825 5-1053 5-380 5-979 5-381 5-985
2.020 2.036 2.046 2.051 2.060 2.140 2.140 2.141 2.163 2.172 2.225 2.281 2.296 2.312 2.411 2.471 2.524 2.535 2.563 2.576 2.671 2.683 2.725 2.782 2.812 2.846 2.878 2.924 2.937 3.020 3.036 3.037 3.041 3.060 3.080 3.112 3.125 3.130 3.156 3.161 3.162 3.210 3.225 3.300 3.350 3.354 3.363 3.443 3.475 3.600
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.018 .018 .018 .018 .018 .018 .018 .018 .018 .018 .018 .020 .020 .020 .020 .020 .020 .020 .020 .020 .022 .022 .022 .022 .022 .022 .022 .022 .022 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .026 .026 .026 .026 .026 .026 .026
.003 .004 .004 .003 .004 .004 .010 .003 .003 .003 .006 .003 .003 .004 .004 .003 .003 .003 .004 .003 .004 .004 .006 .003 .004 .004 .003 .003 .004 .003 .004 .003 .003 .004 .004 .003 .003 .003 .003 .004 .003 .003 .006 .003 .006 .003 .005 .006 .006 .006
5-655 5-037 5-346 5-642 5-1044 5-027 5-1046 5-145 5-347 5-348 5-800 5-1047 5-015 5-702 5-039 5-354 5-355 5-805 5-703 5-358 5-361 5-159 5-982 5-807 5-704 5-042 5-697 5-367 5-705 5-368 5-044 5-369 5-810 5-811 5-1052 5-374 5-557 5-813 5-815 5-045 5-816 5-819 5-984 5-821 5-825 5-1053 5-380 5-979 5-381 5-985
51.31 51.71 51.97 52.10 52.32 54.36 54.36 54.38 54.94 55.17 56.52 57.94 58.32 58.72 61.24 62.76 64.11 64.39 65.10 65.43 67.84 68.15 69.22 70.66 71.42 72.29 73.10 74.27 74.60 76.71 77.11 77.14 77.24 77.72 78.23 79.04 79.38 79.50 80.16 80.29 80.31 81.53 81.92 83.82 85.09 85.19 85.42 87.45 88.27 91.44
.070 .139 .139 .070 .139 .125 .315 .047 .062 .070 .275 .093 .080 .139 .139 .070 .103 .070 .139 .082 .139 .115 .275 .103 .139 .139 .080 .103 .139 .103 .139 .103 .062 .112 .111 .070 .103 .100 .060 .139 .070 .103 .275 .070 .275 .070 .155 .275 .275 .275
Millimeters Tol ± W
0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.66 0.66 0.66 0.66 0.66 0.66 0.66
1.78 3.53 3.53 1.78 3.53 3.18 8.00 1.19 1.57 1.78 6.99 2.36 2.03 3.53 3.53 1.78 2.62 1.78 3.53 2.08 3.53 2.92 6.99 2.62 3.53 3.53 2.03 2.62 3.53 2.62 3.53 2.62 1.57 2.84 2.82 1.78 2.62 2.54 1.52 3.53 1.78 2.62 6.99 1.78 6.99 1.78 3.94 6.99 6.99 6.99
Tol ±
Std 5-Size
I.D.
.08 .10 .10 .08 .10 .10 .25 .08 .08 .08 .15 .08 .08 .10 .10 .08 .08 .08 .10 .08 .10 .10 .15 .08 .10 .10 .08 .08 .10 .08 .10 .08 .08 .10 .10 .08 .08 .08 .08 .10 .08 .08 .15 .08 .15 .08 .13 .15 .15 .15
5-031 5-828 5-986 5-390 5-987 5-831 5-1054 5-833 5-394 5-988 5-395 5-396 5-989 5-060 5-836 5-401 5-1060 5-840 5-842 5-844 5-402 5-848 5-850 5-403 5-851 5-852 5-853 5-559 5-407 5-408 5-410 5-412 5-855 5-856 5-413 5-414 5-858 5-416 5-062 5-417 5-063 5-862 5-863 5-421 5-573 5-567 5-1041 5-064 5-428 5-430
3.640 3.661 3.725 3.957 3.975 4.020 4.080 4.085 4.096 4.100 4.117 4.171 4.225 4.390 4.427 4.531 4.609 4.630 4.664 4.682 4.750 4.875 4.925 4.930 4.984 5.030 5.057 5.236 5.249 5.265 5.340 5.414 5.444 5.465 5.475 5.487 5.500 5.553 5.604 5.616 5.750 5.789 5.815 5.882 5.968 5.985 6.023 6.350 6.361 6.482
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.028 .028 .028 .028 .028 .030 .030 .030 .030 .030 .030 .030 .030 .030 .030 .030 .033 .033 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .040 .040 .040 .040 .040 .040 .040 .040 .040 .040 .040 .040
.004 .003 .006 .004 .006 .004 .005 .003 .003 .006 .003 .003 .006 .003 .004 .003 .004 .004 .004 .004 .005 .003 .006 .003 .004 .005 .006 .005 .004 .004 .003 .003 .004 .003 .005 .003 .005 .004 .003 .004 .003 .006 .004 .004 .003 .003 .003 .006 .004 .005
5-031 5-828 5-986 5-390 5-987 5-831 5-1054 5-833 5-394 5-988 5-395 5-396 5-989 5-060 5-836 5-401 5-1060 5-840 5-842 5-844 5-402 5-848 5-850 5-403 5-851 5-852 5-853 5-559 5-407 5-408 5-410 5-412 5-855 5-856 5-413 5-414 5-858 5-416 5-062 5-417 5-063 5-862 5-863 5-421 5-573 5-567 5-1041 5-064 5-428 5-430
92.46 92.99 94.62 100.51 100.97 102.11 103.63 103.76 104.04 104.14 104.57 105.94 107.32 111.51 112.45 115.09 117.07 117.60 118.47 118.92 120.65 123.83 125.10 125.22 126.59 127.76 128.45 133.00 133.32 133.73 135.64 137.52 138.28 138.81 139.07 139.37 139.70 141.05 142.34 142.65 146.05 147.04 147.70 149.40 151.59 152.02 152.98 161.29 161.57 164.64
.125 .090 .275 .147 .275 .147 .209 .103 .070 .275 .070 .070 .275 .044 .140 .070 .150 .139 .122 .140 .188 .060 .260 .103 .147 .210 .233 .214 .123 .139 .070 .103 .124 .070 .164 .062 .168 .120 .070 .127 .070 .252 .140 .110 .070 .070 .103 .275 .108 .170
Millimeters Tol ± W
0.71 0.71 0.71 0.71 0.71 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.84 0.84 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02
3.18 2.29 6.99 3.73 6.99 3.73 5.31 2.62 1.78 6.99 1.78 1.78 6.99 1.12 3.56 1.78 3.81 3.53 3.10 3.56 4.78 1.52 6.60 2.62 3.73 5.33 5.92 5.44 3.12 3.53 1.78 2.62 3.15 1.78 4.17 1.57 4.27 3.05 1.78 3.23 1.78 6.40 3.56 2.79 1.78 1.78 2.62 6.99 2.74 4.32
Tol ±
.10 .08 .15 .10 .15 .10 .13 .08 .08 .15 .08 .08 .15 .08 .10 .08 .10 .10 .10 .10 .13 .08 .15 .08 .10 .13 .15 .13 .10 .10 .08 .08 .10 .08 .13 .08 .13 .10 .08 .10 .08 .15 .10 .10 .08 .08 .08 .15 .10 .13
(a) The rubber compound must be added when ordering by the 5-size number (i.e., N0674-70 5-007). (b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table
9-14
Parker Hannifin Corporation • O-Ring Division 2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 • Fax: (859) 335-5128 www.parkerorings.com
Parker O-Ring Handbook
Parker Series 5-XXX O-Ring Sizes (Continued) I.D.
5-666 5-869 5-434 5-696 5-691 5-873 5-975 5-875 5-438 5-439 5-876 5-877 5-445 5-880 5-575 5-450 5-882 5-635 5-883 5-884 5-885 5-886 5-457 5-458 5-887 5-165 5-889 5-976 5-890 5-623 5-464 5-891 5-466 5-469 5-471 5-894 5-474 5-898 5-476 5-069 5-900 5-480 5-482 5-164 5-901 5-485 5-486 5-902 5-487 5-488
6.520 6.609 7.108 7.110 7.139 7.230 7.425 7.580 7.613 7.640 7.674 7.802 8.277 8.350 8.875 9.071 9.162 9.370 9.820 9.984 10.171 10.178 10.232 10.340 10.343 10.359 10.372 10.425 10.606 10.630 10.656 10.734 10.749 10.883 10.995 10.996 11.331 11.335 11.562 11.750 12.000 12.017 12.109 12.160 12.234 12.260 12.299 12.360 12.380 12.463
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.040 .045 .045 .045 .045 .045 .045 .050 .050 .050 .050 .050 .050 .050 .055 .055 .055 .055 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .060 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070
.003 .004 .006 .003 .003 .003 .006 .005 .003 .004 .005 .003 .006 .006 .003 .003 .005 .003 .003 .003 .004 .004 .004 .004 .006 .004 .003 .006 .003 .004 .003 .004 .005 .003 .004 .003 .006 .003 .006 .004 .005 .006 .004 .005 .004 .004 .004 .005 .004 .003
5-666 5-869 5-434 5-696 5-691 5-873 5-975 5-875 5-438 5-439 5-876 5-877 5-445 5-880 5-575 5-450 5-882 5-635 5-883 5-884 5-885 5-886 5-457 5-458 5-887 5-165 5-889 5-976 5-890 5-623 5-464 5-891 5-466 5-469 5-471 5-894 5-474 5-898 5-476 5-069 5-900 5-480 5-482 5-164 5-901 5-485 5-486 5-902 5-487 5-488
165.61 167.87 180.54 180.59 181.33 183.64 188.60 192.53 193.37 194.06 194.92 198.17 210.24 212.09 225.42 230.40 232.72 238.00 249.43 253.59 258.34 258.52 259.89 262.64 262.71 263.12 263.45 264.80 269.39 270.00 270.66 272.64 273.03 276.43 279.27 279.30 287.81 287.91 293.67 298.45 304.80 305.23 307.57 308.86 310.74 311.40 312.39 313.94 314.45 316.56
.070 .139 .275 .103 .072 .070 .260 .210 .070 .125 .210 .104 .275 .275 .070 .062 .210 .103 .103 .070 .139 .112 .139 .139 .275 .139 .104 .260 .103 .139 .070 .139 .210 .103 .149 .103 .275 .103 .275 .139 .187 .285 .139 .210 .139 .139 .137 .210 .139 .103
Millimeters Tol ± W
1.02 1.14 1.14 1.14 1.14 1.14 1.14 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.40 1.40 1.40 1.40 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78
1.78 3.53 6.99 2.62 1.83 1.78 6.60 5.33 1.78 3.18 5.33 2.64 6.99 6.99 1.78 1.57 5.33 2.62 2.62 1.78 3.53 2.84 3.53 3.53 6.99 3.53 2.64 6.60 2.62 3.53 1.78 3.53 5.33 2.62 3.78 2.62 6.99 2.62 6.99 3.53 4.75 7.24 3.53 5.33 3.53 3.53 3.48 5.33 3.53 2.62
Tol ±
Std 5-Size
I.D.
.08 .10 .15 .08 .08 .08 .15 .13 .08 .10 .13 .08 .15 .15 .08 .08 .13 .08 .08 .08 .10 .10 .10 .10 .15 .10 .08 .15 .08 .10 .08 .10 .10 .08 .10 .10 .15 .08 .15 .10 .13 .15 .10 .13 .10 .10 .10 .13 .10 .08
5-569 5-905 5-906 5-907 5-908 5-611 5-619 5-492 5-070 5-910 5-071 5-072 5-493 5-494 5-496 5-498 5-500 5-912 5-1097 5-073 5-502 5-624 5-074 5-504 5-626 5-505 5-506 5-507 5-508 5-166 5-920 5-921 5-512 5-076 5-077 5-924 5-925 5-079 5-515 5-516 5-517 5-518 5-571 5-930 5-520 5-522 5-080 5-524 5-622 5-525
12.475 12.623 12.705 12.725 12.840 12.900 12.915 13.248 13.270 13.375 13.410 13.460 13.490 13.541 13.616 13.650 13.718 13.734 13.750 13.820 14.088 14.111 14.234 14.430 14.470 14.470 14.570 14.600 14.674 14.722 14.780 14.795 15.171 15.260 15.300 15.410 15.465 15.540 15.548 15.740 15.750 16.031 16.234 16.285 16.435 16.507 16.575 16.640 16.750 16.765
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .070 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .080 .090 .090 .090 .090 .090 .090 .090 .090
.004 .004 .003 .006 .004 .005 .004 .004 .004 .005 .004 .005 .004 .005 .004 .004 .006 .004 .003 .004 .005 .004 .004 .004 .003 .004 .004 .005 .004 .004 .005 .003 .004 .005 .004 .005 .005 .004 .005 .004 .006 .006 .004 .006 .004 .006 .005 .005 .006 .004
5-569 5-905 5-906 5-907 5-908 5-611 5-619 5-492 5-070 5-910 5-071 5-072 5-493 5-494 5-496 5-498 5-500 5-912 5-1097 5-073 5-502 5-624 5-074 5-504 5-626 5-505 5-506 5-507 5-508 5-166 5-920 5-921 5-512 5-076 5-077 5-924 5-925 5-079 5-515 5-516 5-517 5-518 5-571 5-930 5-520 5-522 5-080 5-524 5-622 5-525
316.87 320.62 322.71 323.22 326.14 327.66 328.04 336.50 337.06 339.73 340.61 341.88 342.65 343.94 345.85 346.71 348.44 348.84 349.25 351.03 357.84 358.42 361.54 366.52 367.54 367.54 370.08 370.84 372.72 373.94 375.41 375.79 385.34 387.60 388.62 391.41 392.81 394.72 394.92 399.80 400.05 407.19 412.34 413.64 417.45 419.28 421.01 422.66 425.45 425.83
.139 .140 .070 .275 .139 .159 .139 .139 .139 .210 .139 .210 .139 .210 .141 .139 .275 .139 .103 .139 .210 .139 .139 .139 .087 .139 .141 .210 .139 .139 .175 .071 .139 .210 .139 .210 .188 .139 .210 .139 .275 .256 .139 .250 .139 .225 .187 .210 .275 .125
Millimeters Tol ± W
1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29
3.53 3.56 1.78 6.99 3.53 4.04 3.53 3.53 3.53 5.33 3.53 5.33 3.53 5.33 3.58 3.53 6.48 3.53 2.62 3.53 5.33 3.53 3.53 3.53 2.21 3.53 3.58 5.33 3.53 3.53 4.45 1.80 3.53 5.33 3.53 5.33 4.78 3.53 5.33 3.53 6.99 6.50 3.53 6.35 3.53 5.72 4.75 5.33 6.99 3.18
Tol ±
.10 .10 .08 .15 .10 .13 .10 .10 .10 .13 .10 .13 .10 .13 .10 .10 .15 .10 .08 .10 .13 .10 .10 .10 .08 .10 .10 .13 .10 .10 .13 .08 .10 .13 .10 .13 .13 .10 .13 .10 .15 .15 .10 .15 .10 .15 .13 .13 .15 .10
Sizes
Std 5-Size
(a) The rubber compound must be added when ordering by the 5-size number (i.e., N0674-70 5-007). (b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table
Parker Hannifin Corporation • O-Ring Division 2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 • Fax: (859) 335-5128 www.parkerorings.com
9-15
Parker O-Ring Handbook
Sizes
Parker Series 5-XXX O-Ring Sizes (Continued) Std 5-Size
I.D.
5-935 5-526 5-082 5-528 5-937 5-529 5-1100 5-939 5-083 5-084 5-533 5-1102 5-085 5-534 5-1104 5-1105 5-943 5-944 5-947 5-541 5-086 5-948 5-950 5-1010
17.100 17.250 17.250 17.268 17.390 17.455 17.500 17.870 17.910 18.062 18.169 18.265 18.350 18.405 18.500 18.635 18.870 18.880 19.380 19.500 19.580 19.725 19.960 20.609
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .090 .100 .100 .100 .100 .100 .100 .100 .100
.006 .005 .006 .006 .004 .004 .004 .005 .004 .006 .003 .005 .005 .005 .005 .004 .006 .004 .004 .006 .005 .005 .004 .004
5-935 5-526 5-082 5-528 5-937 5-529 5-1100 5-939 5-083 5-084 5-533 5-1102 5-085 5-534 5-1104 5-1105 5-943 5-944 5-947 5-541 5-086 5-948 5-950 5-1010
434.34 438.15 438.15 438.61 441.71 443.36 444.50 453.90 454.91 458.77 461.49 463.93 466.09 467.49 469.90 473.33 479.30 479.55 492.25 495.30 497.33 501.02 506.98 523.47
.275 .187 .240 .242 .139 .139 .139 .210 .139 .281 .096 .210 .210 .210 .188 .139 .275 .139 .139 .250 .210 .210 .139 .139
Millimeters Tol ± W
2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54
6.99 4.75 6.10 6.15 3.53 3.53 3.53 5.33 3.53 7.16 2.44 5.33 5.33 5.33 4.78 3.53 6.99 3.53 3.53 6.35 5.33 5.33 3.53 3.53
Tol ±
.15 .13 .15 .15 .10 .10 .10 .13 .10 .15 .08 .13 .13 .13 .13 .10 .15 .10 .10 .15 .13 .13 .10 .10
Std 5-Size
I.D.
5-088 5-547 5-953 5-089 5-551 5-090 5-552 5-167 5-168 5-169 5-091 5-170 5-171 5-173 5-631 5-172 5-092 5-955
21.180 21.564 22.360 23.406 23.540 23.576 23.612 23.780 24.875 25.153 25.474 25.500 26.125 26.188 26.408 27.485 27.625 28.801
Inches Tol ± W.
Tol ±
Metric 5-Size
I.D.
.100 .100 .100 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .140
.004 .004 .004 .006 .004 .004 .006 .007 .006 .005 .004 .006 .006 .005 .004 .006 .006 .006
5-088 5-547 5-953 5-089 5-551 5-090 5-552 5-167 5-168 5-169 5-091 5-170 5-171 5-173 5-631 5-172 5-092 5-955
537.97 547.73 567.94 594.51 597.92 598.83 599.74 604.01 631.82 638.89 647.04 647.70 663.58 665.18 670.76 698.12 701.68 731.55
.147 .139 .132 .281 .139 .139 .275 .375 .250 .214 .139 .275 .275 .210 .139 .275 .275 .275
Millimeters Tol ± W
2.54 2.54 2.54 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.56
3.73 3.53 3.35 7.14 3.53 3.53 6.99 9.52 6.35 5.44 3.53 6.99 6.99 5.33 3.53 6.99 6.99 6.99
Tol ±
.10 .10 .10 .15 .10 .10 .15 .18 .15 .13 .10 .15 .15 .13 .10 .15 .15 .15
(a) The rubber compound must be added when ordering by the 5-size number (i.e., N0674-70 5-007). (b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. These correspond to AS568A dimensions. O-rings manufactured out of compounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information on shrinkage rates, see the Appendix.
Table 9-3: Parker Series 5-XXX O-Rings Size Cross Reference Table
9-16
Parker Hannifin Corporation • O-Ring Division 2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 • Fax: (859) 335-5128 www.parkerorings.com
Parker O-Ring Handbook
Series 5-XXX Locator Table I.D.
Size
I.D.
Size
I.D.
Size
I.D.
Size
I.D.
.547 .416 .836 1.070 .640 .796 1.421 1.553 1.860 2.296 .352 .603 .890 1.515 1.765 2.140 3.640 1.786 2.036 2.411 2.846 3.036 3.161 .871 .070 .270 .301 .364 .426 4.390 5.604 5.750 6.350 11.750 13.270 13.410 13.460 13.820 14.234 15.260 15.300 15.540 16.575 17.250 17.910 18.062 18.350 19.580 21.180 23.406 23.576 25.474 27.625 .100 .116 .128 .154 .154 .176 .176
5-118 5-124 5-125 5-127 5-133 5-134 5-135 5-136 5-137 5-138 5-139 5-140 5-141 5-142 5-143 5-144 5-145 5-148 5-151 5-156 5-157 5-158 5-159 5-160 5-162 5-164 5-165 5-166 5-167 5-168 5-169 5-170 5-171 5-172 5-173 5-178 5-179 5-180 5-181 5-187 5-190 5-193 5-194 5-197 5-202 5-204 5-205 5-206 5-209 5-211 5-212 5-215 5-218 5-222 5-223 5-225 5-230 5-231 5-239 5-242
.059 .176 .180 .239 .332 .410 .526 .643 .775 .898 .987 1.112 1.226 1.450 1.670 1.891 2.141 .154 .239 .575 1.338 1.550 2.683 .312 .554 12.160 10.359 14.722 23.780 24.875 25.153 25.500 26.125 27.485 26.188 .120 .239 .248 .725 .070 .132 .176 .228 .242 .278 .312 .312 .326 .370 .375 .384 .418 .425 .455 .458 .469 .500 .501 .570 .600
5-243 5-247 5-248 5-250 5-251 5-252 5-254 5-256 5-257 5-263 5-264 5-266 5-273 5-278 5-279 5-291 5-294 5-295 5-296 5-297 5-301 5-312 5-320 5-321 5-327 5-329 5-330 5-335 5-337 5-338 5-342 5-343 5-346 5-347 5-348 5-354 5-355 5-358 5-361 5-367 5-368 5-369 5-374 5-380 5-381 5-390 5-394 5-395 5-396 5-401 5-402 5-403 5-407 5-408 5-410 5-412 5-413 5-414 5-416 5-417
.604 .623 .625 .627 .631 .652 .660 .707 .772 .750 .752 .766 .879 .979 1.004 1.186 1.213 1.225 1.229 1.230 1.259 1.454 1.540 1.559 1.640 1.670 1.674 1.802 1.873 1.925 1.980 2.000 2.046 2.163 2.172 2.471 2.524 2.576 2.671 2.924 3.020 3.037 3.112 3.363 3.475 3.957 4.096 4.117 4.171 4.531 4.750 4.930 5.249 5.265 5.340 5.414 5.475 5.487 5.553 5.616
5-421 5-428 5-430 5-434 5-438 5-439 5-445 5-450 5-457 5-458 5-464 5-466 5-469 5-471 5-474 5-480 5-482 5-485 5-486 5-487 5-488 5-492 5-493 5-494 5-496 5-498 5-500 5-502 5-504 5-505 5-506 5-507 5-508 5-512 5-515 5-516 5-517 5-518 5-520 5-522 5-524 5-525 5-526 5-528 5-529 5-533 5-534 5-541 5-547 5-551 5-552 5-557 5-559 5-563 5-566 5-567 5-569 5-571 5-573 5-575
5.882 6.361 6.482 7.108 7.613 7.640 8.277 9.071 10.232 10.340 10.656 10.749 10.883 10.995 11.331 12.017 12.109 12.260 12.299 12.380 12.463 13.248 13.490 13.541 13.616 13.650 13.718 14.088 14.430 14.470 14.570 14.600 14.674 15.171 15.548 15.740 15.750 16.031 16.435 16.507 16.640 16.765 17.250 17.268 17.455 18.169 18.405 19.500 21.564 23.540 23.612 3.125 5.236 .583 .489 5.985 12.475 16.234 5.968 8.875
5-578 5-579 5-580 5-581 5-582 5-583 5-584 5-585 5-586 5-587 5-588 5-590 5-591 5-592 5-593 5-594 5-595 5-596 5-597 5-598 5-599 5-600 5-601 5-602 5-603 5-604 5-605 5-606 5-609 5-611 5-612 5-613 5-614 5-615 5-616 5-617 5-618 5-619 5-622 5-623 5-624 5-626 5-631 5-632 5-635 5-638 5-642 5-643 5-646 5-652 5-655 5-657 5-664 5-666 5-669 5-670 5-671 5-673 5-675 5-676
.102 .133 .165 .192 .224 .251 .283 .314 .350 .350 .413 .535 .594 .665 .724 .720 .779 .838 .905 .968 1.031 1.094 1.153 1.212 1.279 1.342 1.401 1.468 .600 12.900 .344 .437 .391 .469 .516 .625 1.016 12.915 16.750 10.630 14.111 14.470 26.408 .110 9.370 .233 2.051 .650 .126 .473 2.020 1.465 .320 6.520 .146 1.437 1.680 .305 .508 .610
Sizes
Size 5-001 5-002 5-003 5-004 5-005 5-006 5-008 5-009 5-011 5-015 5-018 5-021 5-022 5-024 5-025 5-027 5-031 5-035 5-037 5-039 5-042 5-044 5-045 5-049 5-051 5-052 5-056 5-057 5-058 5-060 5-062 5-063 5-064 5-069 5-070 5-071 5-072 5-073 5-074 5-076 5-077 5-079 5-080 5-082 5-083 5-084 5-085 5-086 5-088 5-089 5-090 5-091 5-092 5-101 5-102 5-103 5-105 5-106 5-107 5-108
Table 9-4: Series 5-XXX Locator Table Parker Hannifin Corporation • O-Ring Division 2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 • Fax: (859) 335-5128 www.parkerorings.com
9-17
Parker O-Ring Handbook
Sizes
Series 5-XXX Locator Table (Continued) Size
I.D.
Size
I.D.
Size
I.D.
Size
I.D.
Size
I.D.
5-677 5-682 5-683 5-685 5-686 5-687 5-691 5-696 5-697 5-698 5-699 5-700 5-701 5-702 5-703 5-704 5-705 5-708 5-709 5-710 5-712 5-716 5-718 5-726 5-735 5-736 5-743 5-751 5-753 5-761
1.004 .426 .122 .208 .248 .287 7.139 7.110 2.878 .283 .353 .354 1.937 2.312 2.563 2.812 2.937 .850 1.000 .301 .313 .362 .395 .484 .583 .590 .660 .820 .857 1.010
5-763 5-769 5-780 5-788 5-794 5-795 5-796 5-800 5-805 5-807 5-810 5-811 5-813 5-815 5-816 5-819 5-821 5-825 5-828 5-831 5-833 5-836 5-840 5-842 5-844 5-848 5-850 5-851 5-852 5-853
1.080 1.176 1.412 1.591 1.812 1.850 1.913 2.225 2.535 2.782 3.041 3.060 3.130 3.156 3.162 3.210 3.300 3.350 3.661 4.020 4.085 4.427 4.630 4.664 4.682 4.875 4.925 4.984 5.030 5.057
5-855 5-856 5-858 5-862 5-863 5-869 5-873 5-875 5-876 5-877 5-880 5-882 5-883 5-884 5-885 5-886 5-887 5-889 5-890 5-891 5-894 5-898 5-900 5-901 5-902 5-905 5-906 5-907 5-908 5-910
5.444 5.465 5.500 5.789 5.815 6.609 7.230 7.580 7.674 7.802 8.350 9.162 9.820 9.984 10.171 10.178 10.343 10.372 10.606 10.734 10.996 11.335 12.000 12.234 12.360 12.623 12.705 12.725 12.840 13.375
5-912 5-920 5-921 5-922 5-924 5-925 5-930 5-935 5-937 5-939 5-943 5-944 5-947 5-948 5-950 5-953 5-955 5-964 5-975 5-976 5-979 5-980 5-981 5-982 5-983 5-984 5-985 5-986 5-987 5-988
13.734 14.780 14.795 14.990 15.410 15.465 16.285 17.100 17.390 17.870 18.870 18.880 19.380 19.725 19.960 22.360 28.801 .744 7.425 10.425 3.443 1.475 1.850 2.725 2.975 3.225 3.600 3.725 3.975 4.100
5-989 5-1002 5-1004 5-1006 5-1007 5-1010 5-1011 5-1014 5-1018 5-1023 5-1028 5-1041 5-1042 5-1043 5-1044 5-1046 5-1047 5-1052 5-1053 5-1054 5-1060 5-1097 5-1100 5-1102 5-1104 5-1105
4.225 .239 .290 .322 .330 20.609 .447 .525 1.671 1.788 1.190 6.023 1.817 1.882 2.060 2.140 2.281 3.080 3.354 4.080 4.609 13.750 17.500 18.265 18.500 18.635
Table 9-4: Series 5-XXX Locator Table
9-18
Parker Hannifin Corporation • O-Ring Division 2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 • Fax: (859) 335-5128 www.parkerorings.com
