R
ASSEMBLY INSTRUCTION etherCON | NE8MC, Ruggedized RJ 45 Data Connector
A Special version: remove cover
A
B Cut off release tab of RJ 45 plug standard version
special version
B
C Slide the bushing over the connector onto the cable.
D Put the suitable boot on the cable: l D1 for cable O.D. £ 5mm (0.2”) l D2 for cable O.D. £ 8mm (0.3”)
E C
E Put chuck onto the cable. F Standard version:
D1
D
Position the ring on the cable end (flush to the face).
D
E
D2
or Special version: If applicable press the adapter into the port. In combination with ( E ) the position clamp ( F1)
C F1
RJ4
5
F
G special version
H standard version
G H I J
I
can but must not be used depending to the design of the RJ 45 plug. or
G Slide the connector into the housing. Pay attention: the connector latch has to point downwards (opposite direction of RJ45 lettering
J
max. 0.25 mm
CAUTION:
RJ4
5
H Slide the chuck in the housing (Pay attention to the guiding key).
I Slide the bushing and boot to the housing and J tighten the bushing.
K
K Close the seal of the boot.
NEUTRIK NEUTRIK NEUTRIK NEUTRIK
AG USA Inc. (UK) Ltd. Vertriebs GmbH
LI USA UK DE / NL / AT/DK
Draft. Nr.: BDA 100 / 3102M0861
T: T: T: T:
+423 / 237 24 24 +1 704 / 972 3050 +44 1983 / 811 441 +49 8131 / 280 890
I Update: 04.02.2013 I
F: F: F: F:
+423 / 232 53 93 +1 704 / 438 9202 +44 1983 / 811 439 +49 8131 / 280 830
NEUTRIK France FR NEUTRIK Tokyo Ltd. JP NEUTRIK Hong Kong Ltd. HK
T: +33 1 / 4131 6750 T: +81 3 / 3663 4733 T: +852 / 2687 6055
F: +33 1 / 4131 0511 F: +81 3 / 3663 4796 F: +852 / 2687 6052
Data subject to change without prior notice. ©2013 NEUTRIK® . ALL RIGHTS RESERVED. NEUTRIK® are registered trademark. R
www.neutrik.com