Testing and certification: 1. Supplied seating must meet current ANSI/BIFMA X5.4-2012 standards and must be tested by a US based, independent UL and BIFMA certified test facility. Independent test results must be provided with submittals. Products that have not been tested and passed to current ANSI/BIFMA X5.4-2012 standards by a certified UL and BIFMA test facility will not be accepted. 2. Fire-Test-Response Compliance: a. Fabric: Class 1 according to DOC CS 191 and 16 CFR 1610.61, tested according to California Technical Bulletin 117 b. Cushioning: California Technical Bulletin 117. 3. Electrical Components: Listed and labeled per NFPA 70, Article 100 by a testing agency acceptable to authorities having jurisdiction.
ADD SUBPARAGRAPH F TO SECTION 1.7 AS FOLLOWS: F.
ANSI/BIFMA 5.4X2012: Supplied seating must meet current ANSI/BIFMA X5.4-2012 standards
CHANGE SUBPARAGRAPH A.1.c IN SECTION 2.3 AS FOLLOWS: c.
Chair Mounting Standards: Welded 14 gauge tubular steel standard with attractive armrest and directly anchored to risers through 11 gauge steel vertical bracket.
ADD TO END OF A.1.d.1 IN SECTION 2.3 AS FOLLOWS: 1)
Aisle standard design to allow riser mount based on customer requirement.