MPS > SEMI-ROTARY MANUAL PU
EP1
HT1
EZ1
APPLICATION :
APPLICATION :
APPLICATION :
Water and hydrocarbons
Hydrocarbons
Diesel oil
COMPONENTS :
COMPONENTS :
COMPONENTS :
Body : cast iron Internal mechanism : brass Sealing : ramie wire mesh clamped by gland Coupling seal : nitrile
Body : cast iron Internal mechanism : brass Sealing : nitrile O-ring Coupling seal : nitrile
Body : cast iron Internal mechanism : zamak Sealing : nitrile O-ring Coupling seal : nitrile
REFERENCE N° FLOW RATE INLET AND M3/HR OUTLET DIAMETER
EP0 EP1 EP2 EP3 EP5
0 1 2 3 5
0,9 1,3 2 2,7 5
1/2” 3/4” 1” 1”1/4 1”1/2
TMH
WEIGHT IN KG
REFERENCE
N° FLOW RATE INLET AND TMH M3/HR OUTLET DIAMETER
30 m 22 m 15 m 11 m 6m
4,4 6,45 8,5 11,75 19,3
HT0 HT020 HT1 HT220 HT226 HT326 HT333
0 0 1 2 2 3 3
0,9 0,9 1,3 2 2 2,7 2,7
1/2” 3/4” 3/4” 3/4” 1” 1” 1”1/4
WEIGHT IN KG
30 m 4,2 30 m 4,2 22 m 6,15 15 m 8,2 15 m 8,2 11 m 11,45 11 m 11,45
REFERENCE
N° FLOW RATE INLET AND M3/HR OUTLET DIAMETER
EZ1 1 1,3 EZ220 2 2 EZ226 2 2
The manual pump normally requires NO LUBRICATION. USE OF FRESHWATER
If there is no risk of freezing, in sure that the pump body is always full of water. If there is a risk of freezing, the pump must be drained. IN CASE OF PROLONGED SHUTDOWN
Drain the pump. Spray Vaseline oil via the upper flange. Actuate the lever to distribute the lubrication in the pump body. IN CASE OF BLOCKED PUMP
Spray Vaseline oil via the upper flange. Unfasten the 6 nuts securing the cover by not more than one quarter-turn. Actuate the lever several times. Refasten the nuts.
1
3/4” 3/4” 1”
TMH
WEIGHT IN KG
22 m 5,45 15 m 7,2 15 m 7,2
