IR

DGS&D - QA Inspection Report for Dungri Cloth Cotton Khadi Dyed (To be prepared separately for each lot inspected) QA/...

0 downloads 240 Views 144KB Size
DGS&D - QA

Inspection Report for Dungri Cloth Cotton Khadi Dyed (To be prepared separately for each lot inspected)

QA/TEX/001/1 Version 1

QA Office File no. Inspection Call No and date RC no. Order no. Quantity ordered Name of Supplier Place of Inspection Description of Stores Dungri Cloth Cotton Khadi Dyed Quantity offered Date(s) of Inspection Quantity Inspected Packing details (Attach list giving sr. no., shade, length and mass lot wise and than wise and details of marking on thans) Specifications IS: 3778/1993 with amdts. No. 1 Marking I.R.Totem BIS license no. date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Sample selected as per Table 3 of IS 3778-1993, amds 1 Verify correctness Pre-inspection report □ BIS License □ Markings □ Shade as per sample □ as per contract (Tick √) Feel and Finish □ Selvedge N/A□ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length 10 to 20 mtrs Width, 70/91 cms GSM 145 ±10% Weave Plain Threads per dm warp 126 ± 5% Thread per dm weft 118 ± 10% Visual defects (Number of flags) Count approx warp 59 Tex ( 10 s) Count approx weft 59 Tex (10 s) Blend composition 100% cotton Breaking load N – warp 390 N – 10% Breaking load N – weft 370 N – 10% Dimensional change 5% Max. Scouring loss 2.5 % Max. PH Value 6.0 to 8.5 Colour fastness to Light 4 or Better Colour fastness to Washing a) Change in colour 4 or Better b) Stain on adjacent fabric 4 or Better Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity accepted Quantity rejected Packing details to be incorporated in I Note How I Mark put Facsimile of I mark Name, designation, seal of Inspector Name, Designation and seal of supplier Date Place

DGS&D - QA

QA Office File no. RC no. Order no. Name of Supplier Description of Stores

Inspection Report for Flag hand Signal Red or Green of Bunting Cloth cotton Khadi (Dyed) (To be prepared separately for each lot inspected) Inspection Call No and date

Flag hand Signal/Red or Green of Bunting cloth cotton Khadi Dyed

QA/TEX/001/2 VERSION 1

Quantity ordered Place of Inspection Quantity offered

Date(s) of Inspection Quantity Inspected Packing details (Attach list giving sr. no., shade, length and mass lot wise and than wise and details of marking on thans) Specifications IS: 4106/1994, amds 1 Selvedge marking N/A BIS license no. date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Sample selected as per Table 3 of IS 4106-1994, amds 1 Verify correctness as per Pre-inspection report □ BIS License □ Markings □ Shade as per sample □ contract (Tick √) Feel and Finish □ Selvedge □ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length cm 45.7 cms Width cm 45.7 cms GSM 190 ± 10% Weave Plain Threads per dm warp 142 ± 5% Thread per dm weft 126 ± 10% Visual defects (Number of flags) Count approx warp 59 Tex Count approx weft 74 Tex Blend composition 100% cotton Breaking load N – warp 450 N – 10% Breaking load N – weft 330 N – 10% Dimensional change 5% Max Ph Value of aqueous ext 6.0 to 8.5 Scouring less % 2.5% max Colour fastness Light 5 or better for dyed Colour fastness to Washing a) Change in colour 4 or better b) Stain on adjacent fabric 4 or better Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity accepted Quantity rejected Free flag allowance Packing details to be incorporated in I Note How I Mark put Facsimile of I mark Name, designation, seal of Inspector Name, Designation and seal of supplier Date Place

DGS&D - QA QA Office File no.

Inspection Report for Long Cloth Cotton Khadi Dyed (To be prepared separately for each lot inspected) Inspection Call No and date

QA/TEX/001/3 VERSION 1

RC no. Order no. Quantity ordered Name of Supplier Place of Inspection Description of Stores Long Cloth Cotton Khadi dyed. Quantity offered Date(s) of Inspection Quantity Inspected Packing details (Attach list giving sr. no., and mass lot wise and details of marking Specifications IS: 3771/1993 with amdts. No. 1 Marking BIS license no. Date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Sample thans selected as per Table 3 of IS: 377193 Verify correctness as Pre-inspection report □ BIS License □ Markings □ Shade as per sample □ per contract (Tick √) Feel and Finish □ Selvedge N/A□ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length 10 to 20 mtrs Width 91 cm GSM 160±10% Weave Plain Threads per dm warp 174 ± 5% Thread per dm weft 174 ±10% Visual defects (Number of flags) Count approx warp 37 Tex (16s) Count approx weft 49 Tex (12s) Blend composition 100% cotton Breaking load N – warp 392 N – 10% Breaking load N – weft 372 N – 10% Dimensional Change 5 % Max. pH Value 6.0 to 8.5 Scouring Loss 2.5 % Max. Colour fastness to light 4 or better Colour fastness to washing 4 or better a) Change in colour 4 or better b) Staining on adjacent Fabric Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity accepted Quantity rejected Free flag allowance Packing details to be incorporated in I Note How I Mark put Facsimile of Name, designation, seal of Inspector I mark Name, Designation and seal of supplier Date Place

DGS&D - QA QA Office File no. RC no. Order no. Name of Supplier

Inspection Report for Dosuti cotton Khadi (To be prepared separately for each lot inspected) Inspection Call No and date

Description of Stores Dousti cotton Khadi Bleached/Dyed Date(s) of Inspection Packing details (Attach list giving sr. no., shade, length and mass lot wise and than wise and details of marking on thans) Specifications IS: 3770/1994 Amds.1 V.No.2 BIS license no. Date and validity for ISI Mark Sealed / approved sample no. and date

QA/Tex/001/4 Version 1

Quantity ordered Place of Inspection Quantity offered Quantity Inspected

Selvedge marking

N/A

Lot no. Sample thans selected as per Table 3 of IS 3770-1994, amds 1 Verify correctness as per Pre-inspection report □ BIS License □ Markings □ Shade as per sample □ contract (Tick √) Feel and Finish □ Selvedge □ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length 10 to 20 Mtrs Width in cm 70 CMS GSM 240±10% Weave Plain Threads per dm warp 118± 5% (D) Thread per dm weft 110 ± 10%(D) Visual defects (Number of flags) Count approx warp 49 Tex(12 s) Count approx weft 59 Tex (10 s) Blend composition 100% cotton Breaking load N – warp 800 N – 10% Breaking load N – weft 660 N – 10% Dimensional change 5% Max Ph Value of aqueous ext 6 to 8.5 Scouring less % 2.5% max Colour fastness Light 4 or better for dyed Colour fastness to washing 4 or better a) Change in colour 4 or better b) Staining on adjacent fabric Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity accepted Quantity rejected Free flag allowance Packing details to be incorporated in I Note How I Mark put Facsimile of I mark Name, designation, seal of Inspector Name, Designation and seal of supplier Date Place

DGS&D - QA QA Office File no.

Inspection Report for Long Cloth Cotton Khadi Bleached (To be prepared separately for each lot inspected)

QA/TEX/001/5 VERSION 1

Inspection Call No and date

RC no. Order no. Quantity ordered Name of Supplier Place of Inspection Description of Stores Long Cloth Cotton Khadi bleached Quantity offered Date(s) of Inspection Quantity Inspected Packing details (Attach list giving sr. no., and mass lot wise and details of marking Specifications IS: 3771/1993 with amdt. No. 1 Marking BIS license no. Date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Sample thans selected as per Table 3 of IS: 3771-93 BIS License □ Markings □ Shade as per sample □ Verify correctness as Pre-inspection report □ per contract (Tick √) Feel and Finish □ Selvedge □ Type of packing □ Test Results Parameter Sample 1 2 3 4 5 6 Length 10 to 20 mtrs Width 91 cm GSM 160±10% Weave Plain Threads per dm warp 174 ± 5% Thread per dm weft 174 ±10% Visual defects (Number of flags) Count approx warp 37 Tex (16s) Count approx weft 49 Tex (12s) Blend composition 100% cotton Breaking load N – warp 392 N – 10% Breaking load N – weft 372 N – 10% Dimensional Change 5 % Max. pH Value 6.0 to 8.5 Scouring Loss 2.5 % Max. Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity Quantity rejected Free flag allowance accepted Packing details to be incorporated in I Note Facsimile of I Name, designation, seal of Inspector How I Mark put mark Name, Designation and seal of supplier Date Place

DGS&D - QA

QA Office File no.

Inspection Report for Pugree Cloth Cotton Khadi Bleached/Dyed (To be prepared separately for each lot inspected) Inspection Call No and date

RC no. Order no. Name of Supplier Description of Stores Pugree Cloth Cotton Khadi Date(s) of Inspection Packing details (Attach list giving sr. no., shade, length and mass lot wise and than wise and details of marking on thans) Specifications IS: 3769/1993 with amdts. No. 1 BIS license no. Date and validity for ISI Mark Sealed / approved sample no. and date

QA/Tex/001/6 Version 1

Quantity ordered Place of Inspection Quantity offered Quantity Inspected

Marking

I.R.Totem

Lot no.

Sample thans selected as per Table 3 of IS

Verify correctness as per contract (Tick √)

Pre-inspection report □

BIS License □

Markings □

Feel and Finish □

Selvedge N/A□

Type of packing □

Test Results Parameter Length

sample no.> 4.5/ 5.5 mtrs. or multiple 70 cms 110 +/-10% Plain 158 +/- 5% 158 +/-10%

1

2

3

Shade as per sample □

4

5

Width in Cm GSM Weave Threads per dm warp Thread per dm weft Visual defects (Number of flags) Count approx warp 18 s Count approx weft 18 s Blend composition 100% cotton Breaking load N – warp 334 N – 10% Breaking load N – weft 294 N – 10% Dimensional change 5% Max Ph Value of aqueous ext 6 to 8.5 Scouring loss % 2.5% max Colour fastness Light 5 or better dyed Colour fastness to washing a) Change in colour 4 or better b) Staining on adjacent fabric 4 or better Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity accepted Quantity Free flag rejected allowance Packing details to be incorporated in I Note How I Mark put Facsimile of Name, designation, seal of I mark Inspector Name, Designation and seal of supplier Date Place

DGS&D - QA QA Office File no.

Inspection Report for Sheeting Cloth Cotton Khadi Bleached (to be prepared separately for each lot inspected) Inspection Call No and date

RC no. Order no. Name of Supplier Description of Stores Date(s) of Inspection

Sheeting Cloth Cotton Khadi Bleached.

QA/TEX/001/7 VERSION 1

Quantity ordered Place of Inspection Quantity offered Quantity Inspected

Packing details (Attach list giving sr. no., shade, length and mass lot wise) Specifications IS: 3779/1994 amdts. 1. BIS license no. date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Sample to be selected as per Table 3 of IS: 3779/1994 Verify correctness as per Pre-inspection report □ BIS License □ Markings Shade as per sample □ contract (Tick √) □ Feel and Finish □ Selvedge □ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length cms 10 to 20 mtr Width in cm 91 cms Weave Plain Threads per dm warp 158 ±5% Thread per dm weft 158 ±10 % Visual defects (Number of flags) Count approx warp 12 s Count approx weft 12 s Blend composition 100% cotton Mass g/mt² 170 ±10% Breaking load Kgf. – warp 450 N – 10% Breaking load Kgf. – weft 450 N – 10% Dimensional change 5% Max Ph Value of aqueous ext 6 to 8.5 Scouring loss % 2.5% max Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity accepted Quantity rejected Free flag allowance Packing details to be incorporated in I Note How I Mark put Facsimile of I Name, designation, seal of Inspector mark Name, Designation and seal of supplier Date Place

DGS&D - QA QA Office File no.

Inspection Report for Bunting Cloth Cotton Khadi Dyed (to be prepared separately for each lot inspected)

QA/Tex/001/8 Version 1

Inspection Call No and date

RC no. Order no. Quantity ordered Name of Supplier Place of Inspection Description of Stores Bunting Cloth Cotton Khadi Dyed Quantity offered Date(s) of Inspection Quantity Inspected Packing details (Attach list giving sr. no., shade, length and mass lot wise and than wise and details of marking on thans) Specifications IS: 4106/1994 with amdt. No. 1 Marking I.R.Totem BIS license no. Date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Sample thans selected as per Table 3 of IS 4106-1994, Pre-inspection report □ BIS License □ Markings □ Shade as per sample □ Verify correctness as per contract (Tick √) Feel and Finish □ Selvedge N/A□ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length 10 to 20 mtrs Width 91 cms GSM 190 +/-10% Weave Plain Threads per dm warp 142 +/- 5% Thread per dm weft 126 +/- 10% Visual defects (Number of flags) Count approx warp 10 s Count approx weft 8s Blend composition 100% cotton Breaking load N – warp 450 N – 10% Breaking load N – weft 330 N – 10% Dimensional change 5% Max Ph Value of aqueous ext 6 to 8.5 Scouring less % 2.5% max Colour fastness Light 5 or better for dyed Colour fastness to washing a) Change in colour 4 or better b) Staining on adjacent fabric 4 or better Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity accepted Quantity rejected Free flag allowance Packing details to be incorporated in I Note How I Mark put Facsimile of Name, designation, seal of Inspector I mark Name, Designation and seal of supplier Date Place

DGS&D - QA

Inspection Report for Duster Cotton Khadi Bleached (To be prepared separately for each lot inspected)

QA/TEX/001/9 VERSION 1

QA Office File no. Inspection Call No and date RC no. Order no. Quantity ordered Name of Supplier Place of Inspection Description of Stores Duster Cotton Khadi White Size Quantity offered Date(s) of Inspection Quantity Inspected Packing details (Attach list giving sr. no., shade, length and mass lot wise and than wise and details of marking on thans) Specifications IS: 3777/1994 with amdt. No. 2 Marking I.R.Totem BIS license no. Date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Samples selected as per Table 2 of IS 3777-1994, amds 2 BIS License □ Markings □ Shade as per sample □ Verify correctness as Pre-inspection report □ per contract (Tick √) Feel and Finish □ Selvedge N/A□ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length 61/51/30 Width, 61/46/30 GSM 190±10% Weave Plain Threads per dm warp 126 ± 5% Thread per dm weft 118 ± 10% Visual defects (Number of flags) Count approx warp 59 Tex Count approx weft 74 Tex Blend composition 100% Breaking load N – warp 450 -15% 430 –15% Breaking load N – weft Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity Quantity rejected accepted Packing details to be incorporated in I Note Facsimile of I Name, designation, seal of Inspector How I Mark put mark Name, Designation and seal of supplier Date Place

DGS&D - QA

Inspection Report for Sponge Cloth Cotton Khadi (To be prepared separately for each lot inspected)

QA/Tex/001/10 Version 1

QA Office File no. Inspection Call No and date RC no. Order no. Quantity ordered Name of Supplier Place of Inspection Description of Stores Sponge Cloth Cotton Khadi Grey Quantity offered Date(s) of Inspection Quantity Inspected Packing details (Attach list giving sr. no., shade, length and mass lot wise and than wise and details of marking on thans) Specifications IS:3782/1994 Marking I.R.Totem BIS license no. Date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Samples selected as per Table 2 of IS 3782-1994 Verify correctness as Pre-inspection report □ BIS License □ Markings □ Shade as per sample □ per contract (Tick √) Feel and Finish □ Selvedge N/A□ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length 50/56+/-1 cms Width, 45/56+/-1 cms Mass Per Piece 90/122 +/- 15 % Weave 2/2 Twill Threads per dm warp 86 +/- 5% Thread per dm weft 78 +/-1 5% Visual defects (Number of flags) Count approx warp 30 tex x 2 Count approx weft 74 tex ( 4 ply) or 148 tex(2 ply) Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity rejected Free flag allowance Quantity accepted Packing details to be incorporated in I Note How I Mark put Facsimile of I mark Name, designation, seal of Inspector Name, Designation and seal of supplier Date Place

DGS&D - QA QA Office File no.

Inspection Report for Honey Comb- Towels Cotton Khadi (To be prepared separately for each lot inspected) Inspection Call No and date

RC no. Order no. Quantity ordered Name of Supplier Place of Inspection Description of Quantity offered Stores Date(s) of Quantity Inspected Inspection Packing details (Attach list giving sr. no., shade, length and mass lot wise) Specifications IS: 3781:1994 V. No. 1 BIS license no. Date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Sample to be selected as per Table 3 of IS:3781/1994 Verify correctness as per Pre-inspection report □ BIS License □ Markings □ contract (Tick √) Feel and Finish □ Selvedge □ Type of packing □ Test Results Parameter sample no.> 1 2 3 Length cms As specified± 2 cms Width cms As specified± 1 cm Weave Honeycomb Threads per dm warp 110 (D) ±5% Thread per dm weft 94(D) +/- 5% Visual defects (Number of flags)

QA/Tex/001/11 Version 1

Shade as per sample

4

5

Count approx warp 74 Tex Count approx weft 74 Tex Blend composition 100% cotton Mass g/mt² 360 +/- 5% Breaking load N – warp 450 N – 10% Breaking load N – weft 430 N – 10% Dimensional change 5% Max Ph Value of aqueous ext 6 to 8.5 Scouring loss % 2.5% max Colour fastness to light 5 or better Colour fastness to rubbing 4 or better Colour fastness washing 4 or better a) Change in colour 4 or better b) Staining on adjacent fabric. Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and Criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. .Conclusion: Quantity accepted Quantity rejected Free flag allowance Packing details to be incorporated in I Note How I Mark put Facsimile Name, designation, seal of of I mark Inspector Name, Designation and seal of supplier Date Place

DGS&D - QA

Inspection Report for Dungri Cloth Cotton Khadi Bleached (to be prepared separately for each lot inspected)

QA/TEX/001/12 Version 1

QA Office File no. Inspection Call No and date RC no. Order no. Quantity ordered Name of Supplier Place of Inspection Description of Stores Dungri Cloth Cotton Khadi Dyed Quantity offered Date(s) of Inspection Quantity Inspected Packing details (Attach list giving sr. no., shade, length and mass lot wise and than wise and details of marking on thans) Specifications IS: 3778/1993 with amdts. No. 1 Marking I.R.Totem BIS license no. date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Sampling thans selected as per Table 3 of the IS 3778-93 Verify correctness as per Pre-inspection report □ BIS License □ Markings □ Shade as per sample □ contract (Tick √) Feel and Finish □ Selvedge N/A□ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length 10 to 20 mtrs Width 70/91 cms GSM 145 ±10% Weave Plain Threads per dm warp 126 ± 5% Thread per dm weft 118 ±10% Visual defects (Number of flags) Count approx warp 59 Tex ( 10 Count approx weft 59 Tex (10 s) Blend composition 100% cotton Breaking load N – warp 390 N – 10% Breaking load N – weft 370 N – 10% Dimensional change 5% Max. Scouring loss 2.5 % Max. PH Value 6.0 to 8.5 Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity accepted Quantity rejected Packing details to be incorporated in I Note How I Mark put Facsimile of I mark Name, designation, seal of Inspector Name, Designation and seal of supplier Date Place

DGS&D - QA

Inspection Report for Polyster Cotton Khadi (POLY VASTRA) Suiting for uniform (To be prepared separately for each lot inspected) Inspection Call No and date

QA/TEX/001/13 Version 1

QA Office File no. RC no. Order no. Quantity ordered Name of Supplier Place of Inspection Description of Stores Polyster Cotton Khadi Suiting Quantity offered Date(s) of Inspection Quantity Inspected Packing details (Attach list giving sr. no., shade, length and mass lot wise and than wise and details of marking on thans) Specifications IS: 13717/1993(reaffirmed 2003) Marking BIS license no. Date and validity for ISI Mark Sealed / approved sample no. and date Lot no. Sample size as per Table 2 of IS Verify correctness as per Pre-inspection report □ BIS License □ Markings □ Shade as per sample □ contract (Tick √) Feel and Finish □ Selvedge N/A□ Type of packing □ Test Results Parameter sample no.> 1 2 3 4 5 6 Length 10 to 20 mtrs Width 70 cms GSM 190 ±5% Weave Plain Threads per dm warp 260 ± 5% Thread per dm weft 190 ± 5% Visual defects (Number of flags) Count approx warp 20Tex x2 Count approx weft 20Tex x2 Blend composition 67% polyester± 5% 33% Cotton ± 5% Breaking load N – warp 840 N (MIN) Breaking load N – weft 610 N (MIN) Relaxation Shrinkage warp 2%(MAX) Weft 2%(MAX) Water soluble 1% Max. PH Value 6.0 to 8.5 Colour fastness Light 5 or better Colour fastness washing b) Change in colour 4 or better b) Staining on adjacent fabric. 4 or better Colour fastness to perspiration 4 or better Colour fastness to rubbing 4 or better Heat shrinkage 2%(MAX) Crease Recovery angle 240 Degree Pilling after 5 Hrs test 4 or better Notes: Any other requirement/test as per IS/RC * Use extra sheets if required * All parameters as per IS/RC shall be tested * Number of specimen to be tested for each sample and test methods adopted for different tests, values and tolerances of different parameters and criteria for conformity shall be as specified in the IS. * Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. Extra sheet attached as above. Conclusion: Quantity accepted Quantity rejected Packing details to be incorporated in I Note How I Mark put Facsimile of I mark Name, designation, seal of Inspector Name, Designation and seal of supplier Date Place