IRDGS&D-QA QA Office File No. RC no. & date Order no. Name of the supplier Description of Stores Date(S) of inspection Packing details Specification Sealed/approved sample no & date Lot no. Verify correctness as per contract (Tick ) Sl.No. 1
2 3 4 5 6
7
8
9
10
11
12 13
14 15. 16 17 18 19 20 21 22
23
24
INSPECTION REPORT FOR COAT PARKA
No.IR/Coat Parka/ Tex/05
Inspection Call No and date Quantity ordered Place of Inspection Quantity offered Quantity inspected
As per MHA specification. Pre-inspection report
Feel & Finish Particulars Tested Requirement Outer Shell Fabric Identification of fibre -Warp Cotton -Weft Polyester Weave Plain-1 up-1down End/dm, Minimum 480 Picks/dm, Minimum 240 Mass, g/m2 145-155 Breaking strength, Newton (Minimum) -Warp –wise 600 -Weft-wise 550 Tearing Strength, Newton (Minimum) -Warp –wise 10 -Weft-wise 15 Abrasion Resistance No thread breakage (Martindale) -After 1000 cycles Colour fastness to washing -Change in colour 4 or better -Staining on adjacent fabric 4 or better Colour fastness to perspiration -Change in colour 4 or better -Staining on adjacent fabric 4 or better Colour fastness to rubbing -Dry 4 or better -Wet 4 or better Colour fastness to light 5 or better Dimensional change due to 2.0 relaxation, both directions percentage, maximum Water repellency(Face side) Spray rating Min.80 pH value of aqueous extract 6.0-8.0 Colour specification < 1.0 Inner Shell Fabric Nature of fibre/filament Nylon Weave Plain-1 up-1down End/dm, Minimum 440 Picks/dm, Minium 300 Mass, g/m2 55-65 Tearing Strength, Newton (Minimum) -Warp –wise 45 -Weft-wise 20 Abrasion Resistance No thread breakage (Martindale) -After 1000 cycles Colour fastness to washing -Change in colour 4 or better -Staining on adjacent fabric 4 or better
Olive Green/Other shade as per DDO. Marking Type of packing Observations 1 2
3
4
5
6
7
8
25
26
27 28
29 30 31 32
Colour fastness to perspiration -Change in colour -Staining on adjacent fabric Colour fastness to rubbing -Dry -Wet Colour fastness to light Dimensional change due to relaxation, both directions percentage, maximum pH value of aqueous extract Colour specification(Delta E) Nonwoven inner lining Nature of fibre Thickness, mm, Minimum Polyester Knit fabric Nature of fibre/filament Courses/dm, Minimum Wales/dm, Minimum Thickness, mm, minimum Weight, g/m2 Colour specification (Delta E) Structure
4 or better 4 or better 4 or better 4 or better 5 or better 2.0
6.0-8.0 < 2.0 Polyester 2.4
33 Polyester 34 120 35 120 36 2.5 37 230-250 38 < 2.0 39 Plain knit(Fig.5) NOTES: * Use extra sheets if required . Number of specimen to be tested for each sample and test methods adopted for different tests , values and tolerances of different parameters and criterion for conformity shall be as specified in the governing spec. Results on all specimens to be reported on separate sheets and only the final value as applicable shall be reported in the table above. * Conclusion: Quantity accepted Quantity rejected Packing details to be incorporated in I/Note How I Mark put Facsimile of I mark Name, designation seal of Inspector
Name, Designation and seal of supplier Date Place
