DGS&D, Q.A Wing INSPECTION REPORT File No: __________________________________ Date of Inspection: ________________ I. Call Ref. No: and Date_____________________ Quantity offered: _________________ R.C. No: and Date: ______________________________________________________________________ S.O. No: and Date: ______________________________________________________________________ Name of Supplier: ______________________________________________________________________ Description of Stores: Shirting Angola. Place of Inspection: _____________________________ Govng Specification: CRPF/MHA Std. Sealed Sample No. & date:____________ Sampling Plan: Table 2 of CRPF/MHA Stnadard. S. No:
Bolt
Length
Width
Ends / Picks /
No:
Mtrs:
Cms:
DM: 185 (min)
Speci-
150
fied
-
40 Mtr:
Range
-
Minimum
DM: 160 (min)
Min:
Weight Kgs:
Mass: G/ Sqr Mtr
265+10 -
Visual Defects Flags Flags Declare d Added
Ex. selvedge
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 a.
Any sample fail to meet the requirement of Width, Ends, Picks or mass shall be declared as non-conforming. b. Length of Bolt shall not be less than 40 Mtrs. as per MHA spcification. c. Weave: __________________ (Weave shall be 2/2 Twill) d. GSM shall be tested duly conditioned.
Page 1 of 4
-2No. of Bolts in the Lot: _______________________ No: of samples Drawn:_____________ No. of Non conforming bolts _________________ S. No. of non conforming bolts: _____ Quantity Inspected: __________________________ Quantity rejected: _________________ Method of Dyeing: ______________________________________________________________________ (Method of Dyeing Shall be Top Dyeing.) Selvedge Marking: ______________________________________________________________________ Other Markings given by the Firm
General appearance, Shade, Feel and Finish Vis-à-vis Approved Sample: _______________________ No. of sub-samples drawn for Lab. Test: _________ Sub sample Sl Nos:_____ Sample size: _____________________________________________ (Samples drawn for Lab. Test shall be on firm’s account.)
Wool Mark Registration No: and Date: ________________
Valid up to: ______________________
Packing Details _______________________________________ Facsimile of Acceptance Mark:
Stamping Details: ______________________________________________________________________ (Sample Bolts shall be Double Stamped.) Name, Designation and Seal of Supplier.
Name, Designation and Seal of Inspector.
Page 2 of 4
Firm’s Name Address TESTREPORT Ref: I. Call No: and Date: _________________________________Date of testing:_____________ R.C. No and Date:__________________________________________________________________ S.O. No: and Date:__________________________________________________________________ Description of Store: Shirting Angola Specification: CRPF/MHA Standard No:
Parameters Tested
1
Fineness grade of Wool Tops Blend Composition a. Wool% b. Polyester% Count of Yarn a. Warp b. Weft Breaking Strength (5.0X20.0 cm Strip) Min: a. Warp b. Weft pH Value Pilling (After 5 hrs of test) Min. Colour difference E
2
4
5
6 7 8
Colour Fastness 9 to Light Colour Fastness to Washing 10 - Change in Shade - Staining on adjacent fabrics Colour Fastness to Dry Cleaning 11 - Change in shade - Staining Colour Fastness 12 to Perspiration Change in Colour Staining on adjacent fabric
Specified
Sample No: 1
Sample No: 2
Sample No: 3
Sample No: 4
Sample No: 5
64s 35 ± 3 65 ± 3
15Nm 15Nm
900 800 5.0 – 7.0 4
< 1.2
5 or Better
4 or Better 4 or Better 4 or Better 4 or Better 4 or Better 4 or Better
Contd…2. Page 3 of 4
No:
Parameters Tested
Specified
Sample No: 1
Sample No: 2
Sample No: 3
Sample No: 4
Sample No: 5
Dimensional Change due to relaxation, both 13 1.0 directions, percentage maximum Colour fastness to rubbing 14 -Dry 4 or Better -Wet 4 or Better Moth Proofing 15 Agent Used
16
Moth Proofing Content
___%
Efficiency & it’s undue Toxicity 17 certified by Govt. Laboratory.
Declaration / Documents etc.. to be obtained from the Firm:1. Declaration to the effect that the store offered are pre-inspected / tested and are fit for Inspection. 2. Bolt wise Statement. 3. Pre Inspection Internal Test Report. Certificate from the firm indicating the following:1. Type of Moth proofing agent used. 2. Concentration of Moth proofing agent used / available in the Supply. 3. Test method for determination of Quantity / Level of Moth proofing agent used. 4. Certificate issued by Govt: authorized test house about the efficiency of Moth proofing agent used.
5. Freedom from un-due Toxicity.
Name, Designation and Seal of Supplier.
Name, Designation and Seal of Inspector. **********
Page 4 of 4