07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:14 Uhr
Seite 786
System P4 Introduction Advantages Low vibration: Low maintenance: Low noise: offset operation of tribo-optimised special roller- / e-chain upper and lower run plastic rollers links -design
®
Secure guidance: Robust: comb style auto- steel mounting glide crossbars brackets
Reduce energy consumption by 57% system P4, profile-rol e-chain ®
System P4 - safe, low noise, abrasion-resistant energy supply system on long travels up to 800 m and more. With the low-maintenance igus system P4, a secure energy supply system can be implemented on long travels up to 800 m for cranes or conveyor systems. The upper run and lower run roll staggered on each other. Thus the tribo-optimised plastic rollers don’t overrun, but roll on a continuous, wide roll-through surface. The P4 profile-rol e-chain is safely guided by the comb-shaped autoglide crossbars and the special trough system. Systems of this type should be designed by our system design engineers, please contact us about this. ● Long travels up to 800 m and more, high fill weights up to 30 kg/m ● For very long travels and high travel speeds up to >10 m/s ● Identical pitch of the e-chain link with or without roller ● Smooth, low noise operation iF product design award ● Integrated captive roller in the side part I 2007 igus system P4 ● autoglide crossbars for a safe guiding in very long travels product design ● Large modular tool box system with interior separations of the system E4 award ®
®
I.
®
2007 •
Typical industries and applications ● Cranes ● Warehousing ● Plant construction ● Materials handling
O 786
Find a video online www.igus.eu/P4_movie Discover the advantages
www.igus.eu/best/P4
®
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:14 Uhr
Seite 787
System P4 Energy efficiency Save up to ca. 57% energy ®
Energy efficient polymer e-chains and cables - reduce energy consumption by 57% With the right materials and clever design, the energy consumption can be drastically reduced, as now proven by current tests and sample calculations in the e-chain and cable laboratory at igus . igus e-chains and chainflex cables reduce the required drive power and extend the application‘s service life. ®
®
®
®
®
System P4
Better cables, stronger, rolling e-chains®
-57% rol e-chain
®
Rolling instead of gliding
-37% E4.1
Stronger e-chains®
-17% chainflex
®
Optimised cables
Ea
-17% Standard
Gliding application
100% ®
System P4
chainflex
Reduce energy consumption
= by 57%
+
Sample calculations online www.igus.eu/energyefficiency
®
®
dB(A)
v m/s
System P4 | igus profile-rol e-chain tests
10
Travel speed igus P4 profile-rol e-chain ®
1) First rol e-chain from 1999, Lab test, v = 2,0 m/s 2) Outdoor test, v = 6,0 m/s each 1 m measurement distance ®
86
®
84 82
6.0
80
4040RHD 5050RHD
1999
2004
P4.32 P4.42 P4.56 P4.80
0 2008
76
0
I
P4.56
2828R 3838R 4040R 5050R
4040R
78
3.0
1
2
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
787
i
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:14 Uhr
Seite 788
System P4 Selection table Series
Inner height hi [mm]
Inner width Bi [mm]
Outer width Ba [mm]
Outer height ha [mm]
Bend radius R [mm]
Travels max. [m]
Page
System P4 profile-rol e-chain
®
safe, low noise, abrasionresistant on long travels P4.32 P4.42 P4.56 P4.80
32 42 56 80
100 - 200 100 - 200 187 - 400 187 - 400
132 - 232 154 - 254 257 - 470 263 - 476
54 64 84 108
150 - 250 100 - 350 250 - 350 250 - 350
Request Info
500 600 800 800
790 794 798 802
1-800-453-1692 www.aboveboardelectronics.com
System P4 | Features | Accessories
Optimised interior separation programme, cables last up to 4 times longer
Robust igus pivoting mounting brackets available
Offset operation of upper and lower run, resulting in continuous roll-through surface
Extension link for heavy fill weights
Tribo-optimised plastic rollers for all
2 inner heights available (56, 80 mm) 50% higher fill weight possible Maximum rigidity Divides cross section into compartments (electric/hydraulic)
igus P4 systems Wear optimised Long cycle life Improved rolling Lower noise and vibration
• Aluminium guide trough system • Special geometry in combination with
®
®
autoglide cross bars allows for offset upper and lower run • Strong installation kits for long cycle life • igus aluminium trough segments resist ®
Same pitch for roller links / e-chain links ®
788 More information
www.igus.eu/P4
corrosion
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:14 Uhr
Seite 789
System P4 Technical data Overview Technical data Speed rolling
≤ 10 [m/s]
Acceleration rolling
≤ 50 [m/s2]
Material - permitted temperature °C, igumid G Flammability class, igumid G
-40°C – +120°C VDE 0304 IIC UL94 HB
igus P4 rol e-chain in suitable super alu trough. High speeds, longest travels, smooth running - giving longest lifetime ®
®
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
789
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:14 Uhr
Seite 790
System P4 Series P4.32 Product range
P4.32
®
profile-rol e-chain with comb style autoglide crossbars, medium inner height
CI 32
P4.32 crossbars every link
P4.32 | Crossbars every link - removable along the inner and outer radius Part No. e-chain
Bi
Ba
R Available bend radii
[mm]
[mm]
[mm]
P4.32. 10 . R.0 P4.32. 15 . R.0
100 150
132 182
| 075*| 100*| 125*| 150 | 200 | 250 | 300* | 075*| 100*| 125*| 150 | 200 | 250 | 300*
≈ 2,71
P4.32. 20 . R.0
200
232
| 075*| 100*| 125*| 150 | 200 | 250 | 300*
≈ 3,34
®
Weight [kg/m]
*Radius available upon request, please consult igus for delivery time. ®
Supplement Part No. with required radius (R). Example: P4.32.15.150.0
Request Info
1-800-453-1692 www.aboveboardelectronics.com
790 More information
www.igus.eu/P4.32
≈ 3,04
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:14 Uhr
Seite 791
System P4 Series P4.32 Dimensions
P4.32
as
Offset operation of upper and lower run, rresulting in continuous roll-through surface
11-----li 11 32 54
≤29 mm
2 x 54 + 3
Ba + 6 Ba Bi
System P4 principle
Inner height 32 mm Pitch 56 mm/link Links/m 18 (1008 mm) Chain length S/2 + K2
Rolling applications | Long travels up to max. 500 m | Fill weight 6,0 kg/m S S/2
S/2
D2 Fixed end
H2
K2
ACL = Offset fixed point Moving end
R
Guide trough with glide bar
Guide trough without glide bar
HRI
)
-P-ACL Total length of guide trough Note: for long travel (gliding) applications, please consult igus . In case of travels <10 m we recommend an unsupported e-chain . ®
®
R
075*
100*
125*
150
200
250
300*
H2
125
125
125
125
125
125
125
D2 K2
425 728 100
500 840 150
635 1064 263
760 1232 376
1015 1624 596
1400 2072 835
1625 2464 1054
ACL
M
*Radius available upon request, please consult igus for delivery time. ®
=
System P4 - aluminium guide trough system Special geometry in combination with autoglide cross bars allows for offset upper and lower run • Strong installation kits for long cycle life •Aluminium trough segments resist corrosion and seawater More information www.igus.eu/P4
Request Info
1-800-453-1692 www.aboveboardelectronics.com
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
791
07)-D-EU-IT-LANGSPEZ-768-896a2
P4.32
20.06.2015
2:14 Uhr
Seite 792
System P4 Series P4.32 Accessories Interior separation | New generation
32
16
3,4
16
5
32.1.1
32.2.1
32.3.1
3210.X
32.4.1
32.5.1
As standard separators are assembled every 2nd e-chain link! ®
iX I IA IX I IN 3
Standard separator, wide base assembled
7
For even faster installation
QuickLock crossbar unassembled 32.2 assembled 32.2.1
12 3
Wide on one side for high holding strength, narrow on opposite side for easy cable fitting.
For thin cables
Separator, narrow base
Separator with a narrow base for a large number of thin cables side by side. Saves space in e-chains . ®
unassembled 32.3 assembled 32.3.1
8
7
Locks securely in 5 mm increments
Notch separator for notch crossbar
3
(: =
Notch separator for exact positioning in e-chains . Recommended for side-mounted applications. ®
unassembled 32.5 assembled 32.5.1
12
3,4
32.1 32.1.1
Separator for
3
=
Separator with a wide base for maximum holding strength in the e-chain . ®
unassembled
12
X -1
Standard - for any application
Horizontal separation
Full-width shelf, lockable
Full-width shelf locks securely into separators at both ends,
unassembled 3200.X assembled 3210.X
giving a fixed width. Separators can be moved freely over the shelf in horizontal direction. Can be fitted at one height.
Lockable full- Width X [mm] unassembled assembled Width X [mm] unassembled assembled Width X [mm] unassembled assembled width shelves 050 3200.050 3210.050 125 3200.125 3210.125 225 3200.225 3210.225 075
3200.075 3210.075 150
3200.150 3210.150 250
100 115
3200.100 3210.100 175 3200.115 3210.115 200
3200.175 3210.175 3200.200 3210.200
Request Info
1-800-453-1692 www.aboveboardelectronics.com
792 More information
www.igus.eu/P4.32
3200.250 3210.250
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 793
System P4 P4.32 Accessories
P4.32
Mounting brackets | pivoting Fixed end Polymer
Moving end Steel
P4.32100.5.VS.E45 90 60
P4.32100.4.VS.E45 80 32,5 35
mJ_, 0
@
..I 4I ..I
••
I. I. I.
41 41 Al
1,.• 1,.• lr
12,5
A = Bi - 20
Bi
Bi + 32
60
9
32
00
Mounting brackets pivoting | Recommended for rolling applications on long travels Width Index
Part No. full set for Fixed end and moving end
Bi
A
[mm]
[mm]
10. 0. 15.
P4.32100.54.10.VS.E45 P4.32100.54.15.VS.E45
100 150
80 130
20.
P4.32100.54.20.VS.E45
200
180
The mounting brackets for P4 e-chains consist of a steel mounting bracket at the moving end and a polymer mounting bracket at the fixed end. This ensure that the rollers move over a plain surface at the fixed end. There is a fixed end module integrated that can be clamped directly into the trough without drilling any holes. In addition it includes a C-profile for the ®
strain relief. Request Info
1-800-453-1692 www.aboveboardelectronics.com
Strain relief, e.g. clamps, tiewrap plates, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 656
A
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
793
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 794
System P4 Series P4.42 Product range
P4.42
®
profile-rol e-chain with comb style autoglide crossbars, medium inner height
CI 42
P4.42 crossbars every link
P4.42 | Crossbars every link - removable along the inner and outer radius Part No. e-chain
Bi
Ba
R Available bend radii
[mm]
[mm]
[mm]
P4.42. 10 . R.0 P4.42. 15 . R.0
100 150
154 202
| 100 | 125 | 150 | 200 | 250 | 300 | 350 | 100 | 125 | 150 | 200 | 250 | 300 | 350
≈ 3,95
P4.42. 20 . R.0
200
254
| 100 | 125 | 150 | 200 | 250 | 300 | 350
≈ 4,47
®
[kg/m]
Supplement Part No. with required radius (R). Example: P4.42.15.150.0
Request Info
1-800-453-1692 www.aboveboardelectronics.com
794 More information
www.igus.eu/P4.42
Weight
≈ 4,22
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 795
System P4 Series P4.42 Dimensions
P4.42
as
Offset operation of upper and lower run, rresulting in continuous roll-through surface
11-----li 11 42 64
≤38 mm
2 x 64 + 3
Ba + 6 Ba Bi
System P4 principle
Inner height 42 mm Pitch 67 mm/link Links/m 15 (1005 mm) Chain length S/2 + K2
Rolling applications | Long travels up to max. 600 m | Fill weight 7,0 kg/m S S/2
S/2
D2 Fixed end
H2
K2
ACL = Offset fixed point Moving end
R
Guide trough with glide bar
Guide trough without glide bar
HRI
)
-P-ACL Total length of guide trough Note: for long travel (gliding) applications, please consult igus . In case of travels <10 m we recommend an unsupported e-chain . ®
®
M
R
100
125
150
200
250
300
350
H2
140
140
140
140
140
140
140
D2 K2
520 930 195
785 1206 335
940 1407 470
1280 1876 765
1620 2345 1045
1960 2814 1330
2265 3216 1615
ACL
=
Request Info
1-800-453-1692 www.aboveboardelectronics.com
System P4 - aluminium guide trough system Special geometry in combination with autoglide cross bars allows for offset upper and lower run • Strong installation kits for long cycle life •Aluminium trough segments resist corrosion and seawater More information www.igus.eu/P4
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
795
07)-D-EU-IT-LANGSPEZ-768-896a2
P4.42
20.06.2015
2:15 Uhr
Seite 796
System P4 Series P4.42 Accessories Interior separation | New generation
1
11. 5
42
21
7,5 7,5
3,4
NEL
41-
21
N=MI=INILMF -91=111 aL
MM\M
M\M 42.1.1
i l k WM\ 42.2.1
42.3.1
3210.X
42.4.1
42.5.1
As standard separators are assembled every 2nd e-chain link! ®
3
i
0
i
Standard separator, wide base
Standard - for any application Separator with a wide base for maximum holding strength in the e-chain . ®
unassembled assembled
14 4
For even faster installation
Separator for
3
QuickLock crossbar unassembled 42.2 assembled 42.2.1
14 3
Wide on one side for high holding strength, narrow on opposite side for easy cable fitting.
For thin cables
Separator, narrow base
Separator with a narrow base for a large number of thin cables side by side. Saves space in e-chains . ®
unassembled 42.3 assembled 42.3.1
7 4
Locks securely in 5 mm increments
Notch separator for notch crossbar
3
r: , = X -1
Notch separator for exact positioning in e-chains . Recommended for side-mounted applications. ®
unassembled 42.5 assembled 42.5.1
14 3,4
IX Ig I0
42.1 42.1.1
Horizontal separation
Full-width shelf, lockable
Full-width shelf locks securely into separators at both ends,
unassembled 3200.X assembled 3210.X
giving a fixed width. Separators can be moved freely over the shelf in horizontal direction. Can be fitted at 3 different heights.
Lockable full- Width X [mm] unassembled assembled Width X [mm] unassembled assembled Width X [mm] unassembled assembled width shelves 050 3200.050 3210.050 125 3200.125 3210.125 225 3200.225 3210.225 075
3200.075 3210.075 150
3200.150 3210.150 250
100 115
3200.100 3210.100 175 3200.115 3210.115 200
3200.175 3210.175 3200.200 3210.200
Request Info
1-800-453-1692 www.aboveboardelectronics.com
796 More information
www.igus.eu/P4.42
3200.250 3210.250
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 797
System P4 P4.42 Accessories
P4.42
Mounting brackets | pivoting Fixed end Polymer
Moving end Steel
P4.42100.5.VS.E45 97,5
P4.42100.4.VS.E45
60
32,5
80 35
12,5
A = Bi - 12
Bi
Bi + 54
60
32
9
Mounting brackets pivoting | Recommended for rolling applications on long travels Width Index 10. 15.
0-
20.
Part No. full set for Fixed end and moving end
Bi
A
[mm]
[mm]
P4.42100.54.10.VS.E45 P4.42100.54.15.VS.E45
100 150
80 130
P4.42100.54.20.VS.E45
200
180
The mounting brackets for P4 e-chains consist of a steel mounting bracket at the moving end and a polymer mounting bracket at the fixed end. This ensure that the rollers move over a plain surface at the fixed end. There is a fixed end module integrated that can be clamped directly into the trough without drilling any holes. In addition it includes a C-profile for the ®
strain relief. Request Info
1-800-453-1692 www.aboveboardelectronics.com
Strain relief, e.g. clamps, tiewrap plates, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 656
A
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
797
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 798
System P4 Series P4.56 Product range
P4.56
®
profile-rol e-chain with comb style autoglide crossbars, large inner height
ID 56
P4.56 crossbars every link
P4.56 | Crossbars every link - removable along the inner and outer radius Part No. e-chain
Bi
Ba
R Available bend radii
[mm]
[mm]
[mm]
P4.56. 18 . R.0 P4.56. 20 . R.0
187 200
257 270
| 150*| 200 | 250 | 300 | 350 | 400*| 450*| 500* | 150*| 200 | 250 | 300 | 350 | 400*| 450*| 500*
≈ 6,72
P4.56. 25 . R.0 P4.56. 30 . R.0
250 300
320 370
| 150*| 200 | 250 | 300 | 350 | 400*| 450*| 500* | 150*| 200 | 250 | 300 | 350 | 400*| 450*| 500*
≈ 7,39
P4.56. 35 . R.0 P4.56. 40 . R.0
350 400
420 470
| 150*| 200 | 250 | 300 | 350 | 400*| 450*| 500* | 150*| 200 | 250 | 300 | 350 | 400*| 450*| 500*
≈ 8,19
®
Weight [kg/m]
*Radius available upon request, please consult igus for delivery time. ®
Supplement Part No. with required radius (R). Example: P4.56.20.250.0 Request Info
1-800-453-1692 www.aboveboardelectronics.com
Extension link for heavy fill weights 50% higher fill weight possible Maximum rigidity Divides cross section into compartments (electric/hydraulic) 2 inner heights (56, 80 mm) Available upon request. More information www.igus.eu/P4
798 More information
www.igus.eu/P4.56
≈ 7,03 ≈ 7,79 ≈ 8,49
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 799
System P4 Series P4.56 Dimensions
P4.56
as
Offset operation of upper and lower run, rresulting in continuous roll-through surface
56 84
≤50 mm
2 x 84 + 4
Ba + 8,25 Ba Bi
System P4 principle
Inner height 56 mm Pitch 91 mm/link Links/m 11 (1001 mm) Chain length S/2 + K2
Rolling applications | Long travels up to max. 800 m | Fill weight 13 kg/m S S/2
S/2
D2 Fixed end
H2
K2
ACL = Offset fixed point Moving end
R
Guide trough with glide bar
Guide trough without glide bar
HRI
)
-s-ACL Total length of guide trough Note: for long travel (gliding) applications, please consult igus . In case of travels <10 m we recommend an unsupported e-chain . ®
®
R
150*
200
250
300
350
400*
450*
500*
H2
**
180
180
180
180
180
**
**
D2 K2
** ** **
1140 1820 550
1470 2275 800
1700 2639 1000
1950 3003 1200
2255 3458 1450
** ** **
** ** **
ACL
*Radius available upon request, please consult igus for delivery time. ®
M
**Values upon request
= Request Info
1-800-453-1692 www.aboveboardelectronics.com
System P4 - aluminium guide trough system Special geometry in combination with autoglide cross bars allows for offset upper and lower run • Strong installation kits for long cycle life •Aluminium trough segments resist corrosion and seawater More information www.igus.eu/P4
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
799
07)-D-EU-IT-LANGSPEZ-768-896a2
P4.56
20.06.2015
2:15 Uhr
Seite 800
System P4 Series P4.56 Accessories Interior separation | New generation
56 28
14
14
4,5
28
5
56.1.1
min.16
56.2.1
56.3.1
521.X
56.4.1
56.5.1
min.16
Note: please observe a lateral spacing to the side links! e-chain : 16 mm As standard separators are assembled every 2nd e-chain link! ®
®
4
iX Ig IX IN _ ,t
Standard separator, wide base
Standard - for any application Separator with a wide base for maximum holding strength in the e-chain . ®
unassembled 56.1 assembled 56.1.1
18
8
For even faster installation
Separator for
4
QuickLock crossbar unassembled 56.2 assembled 56.2.1
18
4
Wide on one side for high holding strength, narrow on opposite side for easy cable fitting.
For thin cables
Separator, narrow base
Separator with a narrow base for a large number of thin cables side by side. Saves space in e-chains . ®
unassembled 56.3 assembled 56.3.1
8
8
Locks securely in 5 mm increments
Notch separator for notch crossbar
4
4,5
18
X -1
=
Notch separator for exact positioning in e-chains . Recommended for side-mounted applications. ®
unassembled 56.5 assembled 56.5.1
Horizontal separation
Full-width shelf, lockable
Full-width shelf locks securely into separators at both ends,
unassembled 520.X assembled 521.X
giving a fixed width. Separators can be moved freely over the shelf in horizontal direction. Can be fitted at 3 different heights.
Lockable full- Width X [mm] unassembled assembled Width X [mm] unassembled assembled Width X [mm] unassembled assembled width shelves 050 520.050 521.050 125 520.125 521.125 225 520.225 521.225 065
520.065 521.065 150
520.150 521.150 250
520.250 521.250
075 100
520.075 521.075 175 520.100 521.100 200
520.175 521.175 300 520.200 521.200 450
520.300 521.300 520.450 521.450
Request Info
1-800-453-1692 www.aboveboardelectronics.com
800 More information
www.igus.eu/P4.56
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 801
System P4 P4.56 Accessories
P4.56
Mounting brackets | pivoting Fixed end Polymer
Moving end Steel
P4.56100.5.VS.E45 106,5
51,5
45
100 40
15
15
A = Bi - 20
70
70
Bi
Bi - 14
Bi + 70
40
P4.56100.4.VS.E45
44
12
Mounting brackets pivoting | Recommended for rolling applications on long travels Width Index
Part No. full set for Fixed end and moving end
Bi
A
[mm]
[mm]
18. 20.
P4.56100.54.VS.E45 P4.56100.54.VS.E45
180 200
160 180
25. 30.
P4.56100.54.VS.E45 P4.56100.54.VS.E45
250 300
230 280
35. 40.
P4.56100.54.VS.E45 P4.56100.54.VS.E45
350 400
330 380
The mounting brackets for P4 e-chains consist of a steel mounting bracket at the moving end and a polymer mounting bracket at the fixed end. This ensure that the rollers move over a plain surface at the fixed end. There is a fixed end module integrated that can be clamped directly into the trough without drilling any holes. ®
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Strain relief, e.g. clamps, tiewrap plates, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 656
A
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
801
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 802
System P4 Series P4.80 Product range
P4.80
®
profile-rol e-chain with comb style autoglide crossbars, large inner height
0 80
P4.80 crossbars every link
P4.80 | Crossbars every link - removable along the inner and outer radius Part No. e-chain
Bi
Ba
R Available bend radii
[mm]
[mm]
[mm]
P4.80. 18 . R.0 P4.80. 20 . R.0
187 200
263 276
| 150*| 200*| 250 | 300 | 350 | 400*| 450*| 500 | 150*| 200*| 250 | 300 | 350 | 400*| 450*| 500
≈ 8,85
P4.80. 25 . R.0 P4.80. 30 . R.0
250 300
326 376
| 150*| 200*| 250 | 300 | 350 | 400*| 450*| 500 | 150*| 200*| 250 | 300 | 350 | 400*| 450*| 500
≈ 9,46
P4.80. 35 . R.0 P4.80. 40 . R.0
350 400
426 476
| 150*| 200*| 250 | 300 | 350 | 400*| 450*| 500 | 150*| 200*| 250 | 300 | 350 | 400*| 450*| 500
≈ 10,19
®
[kg/m]
*Radius available upon request, please consult igus for delivery time. ®
Supplement Part No. with required radius (R). Example: P4.80.20.250.0 Request Info
1-800-453-1692 www.aboveboardelectronics.com
Extension link for heavy fill weights 50% higher fill weight possible Maximum rigidity Divides cross section into compartments (electric/hydraulic) 2 inner heights (56, 80 mm) Available upon request. More information www.igus.eu/P4
802 More information
www.igus.eu/P4.80
Weight
≈ 9,13 ≈ 9,83 ≈ 10,46
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 803
System P4 Series P4.80 Dimensions
P4.80
Offset operation of upper and lower run, rresulting in continuous roll-through surface
80 108
≤72 mm
2 x 108 + 4
Ba + 8,25 Ba Bi
System P4 principle
Inner height 80 mm Pitch 100 mm/link Links/m 10 (1000 mm) Chain length S/2 + K2
Rolling applications | Long travels up to max. 800 m and more | Fill weight 30 kg/m S S/2
S/2
D2 Fixed end
H2
K2
ACL = Offset fixed point Moving end
R
Guide trough with glide bar
Guide trough without glide bar
HRI
)
-P-ACL Total length of guide trough Note: for long travel (gliding) applications, please consult igus . In case of travels <10 m we recommend an unsupported e-chain . ®
®
R
150*
200*
250
300
350
400*
450*
500
H2
180
180
180
180
180
180
180
180
D2 K2
955 900 **
1310 1400 **
1610 1800 600
1974 2300 800
2060 2700 970
2625 3200 1160
2910 3600 **
3275 4100 1530
ACL
*Radius available upon request, please consult igus for delivery time. ®
M
**Values upon request
= Request Info
1-800-453-1692 www.aboveboardelectronics.com
System P4 - steel guide trough system •Special geometry in combination with autoglide cross bars allows for offset upper
•
•
•
and lower run Strong installation kits for long cycle life Stainless steel trough segments resist corrosion and seawater Available upon request More information www.igus.eu/P4
I
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
803
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 804
System P4 Series P4.80 Accessories
P4.80
Interior separation | New generation
40 40
80
4,5
56
14 14 14 14
5
80.1.1
min.16
80.2.1
80.3.1
521.X
80.4.1
80.5.1
min.16
Note: please observe a lateral spacing to the side links! e-chain : 16 mm As standard separators are assembled every 2nd e-chain link! ®
®
4
X
Standard separator, wide base
: i
18
4
18
x x
a
4
-
8 8
18
t =
4,5
...
unassembled 80.1 assembled 80.1.1 Separator for QuickLock crossbar unassembled 80.2 assembled 80.2.1
X -1
For even faster installation Wide on one side for high holding strength, narrow on opposite side for easy cable fitting.
For thin cables
Separator, narrow base
Separator with a narrow base for a large number of thin cables side by side. Saves space in e-chains . ®
unassembled 80.3 assembled 80.3.1
Locks securely in 5 mm increments
Notch separator for notch crossbar
4
IN
Separator with a wide base for maximum holding strength in the e-chain . ®
8
X
Standard - for any application
Notch separator for exact positioning in e-chains . Recommended for side-mounted applications. ®
unassembled 80.5 assembled 80.5.1
Horizontal separation
Full-width shelf, lockable
Full-width shelf locks securely into separators at both ends,
unassembled 520.X assembled 521.X
giving a fixed width. Separators can be moved freely over the shelf in horizontal direction. Can be fitted at 5 different heights.
Lockable full- Width X [mm] unassembled assembled Width X [mm] unassembled assembled Width X [mm] unassembled width shelves 050 520.050 521.050 125 520.125 521.125 225 520.225 521.225 065
520.065 521.065 150
520.150 521.150 250
520.250 521.250
075 100
520.075 521.075 175 520.100 521.100 200
520.175 521.175 300 520.200 521.200 450
520.300 521.300 520.450 521.450
Request Info
1-800-453-1692 www.aboveboardelectronics.com
804 More information
www.igus.eu/P4.80
07)-D-EU-IT-LANGSPEZ-768-896a2
20.06.2015
2:15 Uhr
Seite 805
System P4 P4.80 Accessories
P4.80
Mounting brackets | pivoting Fixed end Polymer
Moving end Steel
P4.80100.5.VS.E45 100 45
45
100 40
15
15
A = Bi - 17
70
70
Bi
Bi - 14
Bi + 76
40
P4.80100.4.VS.E45
44
12
Mounting brackets pivoting | Recommended for rolling applications on long travels Width Index
Part No. full set for Fixed end and moving end
Bi
A
[mm]
[mm]
18. 0* 20.
P4.80100.54.VS.E45 P4.80100.54.VS.E45
180 200
160 180
25. 30.
P4.80100.54.VS.E45 P4.80100.54.VS.E45
250 300
230 280
35. 0* 40.
P4.80100.54.VS.E45 P4.80100.54.VS.E45
350 400
330 380
The mounting brackets for P4 e-chains consist of a steel mounting bracket at the moving end and a polymer mounting bracket at the fixed end. This ensure that the rollers move over a plain surface at the fixed end. ®
Request Info
1-800-453-1692 www.aboveboardelectronics.com
Strain relief, e.g. clamps, tiewrap plates, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 656
A
igus GmbH Germany | Phone +49 2203 9649-800 Fax -222 |
[email protected] | www.igus.eu ®
805