Application Multi lamp accent fixtures are designed to congregate multiple adjustable fixtures in a single recessed housing to offer versatility in a single location light source. These fixtures offer the same flexibility associated with track fixtures while maintaining a contemporary ceiling appearance. Designed for indoor environments these fixtures are ETL listed for damp locations.
Architectural Series
SERIES HDMT6
PRODUCT DATA
HOUSING: Formed heavy gauge steel rough-in mounting frame with plaster flange,
Recessed 1, 2 or 3 Lamp T6 Metal Halide Adjustable Accent
adjustable hanger brackets and prewired junction box accepts modular fixture housing from below the ceiling and is painted matte black or white powdercoat finish.
TRIM: 1" trim attaches to housing with torsion springs for a tight fit to ceiling. Painted matte white powdercoat (or optional black) finish. Other finishes available on request. Available flangeless for use in plaster ceilings. See Trim Flange section below.
FIXTURES: Gimbal fixtures extend 4" below ceiling and are painted matte white, black or charcoal gray. They are adjustable 81° vertical and 358° horizontal for maximum aiming flexibility. Models are available that offer one, two or three adjustable fixtures. Mounting: Adjustable height “C” channel mounting brackets allow off center installation and accept a wide variety of hanger bars, (see optional accessories).
ELECTRONIC BALLAST: Solid state electronic ballast is thermally protected and accessible through aperture opening. Inline quick connectors facilitate installation and maintenance from below the fixture.
ELECTRICAL: Universal voltage, 120/277 volt input. Wiring compartment provided for 2 circuit wiring. Available in one, two and three lamp models.
SOCKET: 4 KV rated G8.5 Bi Pin socket. LAMP DATA: T6 ceramic metal halide, (by others). HDM (Single Head Model)
A. B. C. Overall D. Overall Rough Aperture Trim Flange Length Width Open 6.5" x 6.5" 8.63" x 8.63" 18.54" 11.53" 6.75" x 6.75" 19.26"
11.53"
7.31" x 15.62"
25.26"
11.53"
7.31" x 23.31"
FOR DAMP LOCATION
Manufactured and tested to UL#1598 and CSA standards. Note: Suitable for damp location. Fixtures are not designed for direct contact with insulation.
Catalog Number –
Trim Flange
2HDMT6________________________________________________________
Example: 2HDMT670E4NDBWB Fixture Series
Lamp/Wattage
HDMT6 (1 lamp) 2HDMT6 (2 lamp) 3HDMT6 (3 lamp)
70 39
Type/Voltage
Beam Distribution
Input Voltage SP – Spot (13°)
Housing Interior
ND – Narrow (25°) W – White E4 120/277 MD – Med. (55°) B – Black Volt Electronic WD – Wide (62°)
Trim Flange Color
W – White B – Black NF – Flangeless for use in plaster ceiling
Optional Accessories
Options
Hanger Bars (set of 2) #101782 = #520 Caddy Bars 9152 = 52” C-Channel #9127 = 27” C-Channel 27BH = 27” Solid Bar #24CBH = 24” one-piece B-Line C-Channel hanger bar
F = Fuse and Fuse Holder
Fixture Type
Job Reference/Location
Lamp Type
Approval
Fixture Color W – White C – Charcoal Grey B – Black
All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail:
[email protected]
SERIES HDMT6 - Recessed 1, 2 or 3 Lamp T6 Metal Halide Adjustable Accent
2HDM (Double Head Model) 6.5" x 14.18" 8.63" x 16.25" 3HDM (Triple Head Model) 6.5" x 20.18" 8.63" x 22.25"
MA4.2
CLUMCN
