878q asphalt

INSTALLATION SELECTION INFORMATION 1 Your Selection Information 2 Additional Information based on your selection Grat...

0 downloads 143 Views 510KB Size
INSTALLATION SELECTION INFORMATION

1 Your Selection Information 2 Additional Information

based on your selection

Grate Description

Type 878Q Longitudinal Ductile Iron Grate

Pavement Finish

Asphalt

Load Class

E - 135,000lbs - 2,323 psi

Length(s)

19.69” (500 mm)

Channel System

KlassikDrain K300, KS300; SlabDrain H300-8, H300-10, H300K-8

Part No.

138130

Note: The information is for grate only. Channels sold separately. ACO Polymer Products, Inc. West Sales Office 825 W. Beechcraft St. Casa Grande, AZ 85122 Tel: (520) 421-9988 Toll Free: (888) 490-9552 Fax: (520) 421-9899

Northeast Sales Office 9470 Pinecone Drive Mentor, OH 44060 Tel: (440) 639-7230 Toll Free: (800) 543-4764 Fax: (440) 639-7235

Electronic Contact:

Follow us on:

[email protected] www.acousa.com

Southeast Sales Office 4211 Pleasant Road Fort Mill, SC 29708 Toll Free: (800) 543-4764 Fax: (803) 802-1063

ACO DRAIN

Type 878Q Longitudinal ductile iron grate (ADA)

Product Features • Certified to EN 1433 Load Class E - 135,000 lbs - 2,323 psi • Uses ‘QuickLok’ boltless locking system • Suitable for use with K300, KS300, H300K-13, and H300KS-13 channels and 621G, 621S, 631G, 631S catch basins • Manufactured from ductile iron to ASTM A 536-84 - Grade 65-45-12 • E- coated for improved resistance against rust • Complies with ADA - American Disabilities Act of 1990 Section 4.5.4 • Complies with ASME: A112.6.3 - 2001: Section 7.12

Heel Resistant Strainers and Grates

• Bicycle Tire Penetration Resistant to AS 3996 - 2006

Specifications General The surface drainage system shall be ACO Drain K300, KS300, H300K-13, and H300KS-13, channels* and 621G, 621S, 631G, and 631S catch basins complete with ACO Type 878Q longitudinal ductile iron grate with ‘QuickLok’ locking as manufactured by ACO Polymer Products, Inc. or similar approved. Materials The covers shall be manufactured from ductile iron and have minimum properties as follows: • Independently certified to meet Load Class E to EN 1433 - 135,000 lbs - 2,323 psi • Ductile iron to ASTM A 536-84 - Grade 65-45-12 • Intake area of 61.85 sq. in. (399 cm²) per half meter of grate The overall width of 1.0” (338mm) and overall length of 0.31” (500mm). Slots measure at a maximum of 1.0” (25.5mm) by 0.31” (8mm). Installation The trench drain system and grates shall be installed in accordance with the manufacturer’s installation instructions and recommendations. * delete as appropriate

July 2017

www.ACODrain.us

ACO Specification Information

E

ACO DRAIN

Type 878Q Longitudinal ductile iron grate (ADA)

E

Plan view

ACO Specification Information

19.69" (500mm)

0.31" (8mm)

1.01" (25.7mm)

Side elevation 13.31" (338mm)

1.81" (30mm)

Part No. Length Width Weight Description inches (mm) inches (mm) lbs. QuickLok grate Type 878Q Ductile iron longitudinal grate QuickLok locking bar QuickLok grate removal tool

138130 10458 01318

19.69 (500) - -

13.31 (338) - -

‘QuickLok’ locking mechanism ACO ‘QuickLok’ is a patented boltless locking system, grates Channel

are removed and replaced with the minimum time and effort for ease of maintenance. The unique design provides a positive ‘snap down’ fit into the locking bar. A stud is fixed

Grate ‘QuickLok’ locking stud (fixed to grate) ‘QuickLok’ locking spring (fixed to locking bar)

‘QuickLok’ locking bar (side and plan

views)

to the grate which ‘locks’ into the spring clip in the locking bar. The ‘QuickLok’ stud is made from stainless steel and high density nylon, the locking bar and clip are stainless steel, for use in both general purpose and corrosive environments.

Southeast Sales Office 4211 Pleasant Road Fort Mill, SC 29708 Toll free: (800) 543-4764 Fax: (803) 802-1063

Follow us on

Electronic Contact: [email protected] www.ACODrain.us

© April 2017 ACO Polymer Products, Inc. This information is believed to be accurate but it is not guaranteed to be so. We cannot assume liability for results that buyer obtains with our product since conditions of use are beyond the control of the company. It is the customer’s responsibility to evaluate suitability and safety of product for his own use. ACO Polymer Products Inc. reserves the right to change the product and specifications without notice.

www.ACODrain.us

SPEC

INFO

ACO Polymer Products, Inc. West Sales Office Northeast Sales Office 825 W. Beechcraft St. 9470 Pinecone Drive Casa Grande, AZ 85122 Mentor, OH 44060 Tel: (520) 421-9988 Tel: (440) 639-7230 Toll Free: (888) 490-9552 Toll free: (800) 543-4764 Fax: (520) 421-9899 Fax: (440) 639-7235

July 2017

53.0 0.5 0.3