7977 AT235P Bucket PDF

Altec AT235P Aerial Cable Placer Stable During Mobile Use Excellent Side Reach For Pole Setbacks Pulling Eye Mount C...

0 downloads 31 Views 413KB Size
Altec AT235P

Aerial Cable Placer

Stable During Mobile Use

Excellent Side Reach For Pole Setbacks

Pulling Eye Mount Can Be Attached To Either Side Of Platform

• • • • • •

40 ft (12.2 m) Working Height 26.5 ft (8.1 m) Side Reach 400 lb (181 kg) Side Load Capacity Rated For Mobile Use Platform Capacity To 350 lb (159 kg) Optional Single Handle Proportional Control

Platform Access From Ground

Altec AT235P Specifications

OPTIONS

STANDARD FEATURES • End-Mounted Steel Placer Platform 24 x 30 x 42 in (610 x 762 x 1067 mm) • Dual Boom Tip Receiver And Pulling Eye Assembly • Two-Way Voice Communication System From Platform To Cab • Engine Start/Stop At Upper And Lower Controls • 120 VAC Circuit At Boom Tip With Outlets At Platform • Platform Access From Ground • Telescopic, Articulating Steel Booms • Non-Insulating Aerial Device • Hydraulically Extended Boom • 3707 Non-Continuous Rotation • Open Center Hydraulic System • Designed In ISO 9001 Certified Facility

• Choice Of Reservoirs: Bed-Mounted Pedestal-Mounted • Optional Single Handle Proportional Control • Airline To Platform • Diagnostic Pressure Test Kit • Secondary Stowage System • Tool Pouches And Trays

RECOMMENDED FEATURES • Fall Protection System

• Wheel Chocks

REACH DIAGRAM

GENERAL SPECIFICATIONS Ground to Bottom of Platform* Working Height* Maximum Side Reach Stowed Travel Height* Side Load Capacity Platform Capacity Boom Articulation Articulating Arm Rotation

35.0 ft 10.7 m 40.0 ft 12.2 m 26.5 ft 8.1 m 10.9 ft 3.3 m 400 lb 181 kg 350 lb 159 kg 25 to +78 0 to +90 370 Non-continuous

* Based on a 40 in (1016 mm) Chassis Frame Height

Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation.

Cab Mounted Communication System

Optional Single Handle Proportional Controller

Altec Sales and Service

ALT1018601 AT235P-3M-12/09

Manufacturing and Service Facilities Located Throughout the United States and Canada www.altec.com

Altec Industries, Inc. Post Office Box 10264 Birmingham, Alabama 35202 Phone 205/991-7733 Toll-free: 800-958-2555 [email protected]