one-piece rail clips, CRANE STOPS
1-1/16"
1-1/16"
1-1/4"
1-3/8"
2-1/2"
2-3/4"
1-1/4"
1-3/8"
4-1/2"
3-1/2" 1-1/2"
3/4" 1-1/2"
1"
1" 7/8"
1-1/4"
3/4"
1-1/8"
1-1/8"
3/8"
No. 175 Weight - 2.19 lbs. For 175 lb. Crane rail.
No. 171 Weight - 3.60 lbs. For 171 lb. Crane rail. Crane Stops This Heavy-Duty Crane Stop is for use on all rail sizes (up to and including 175-lb.) and especially where large cranes are operating. It is fabricated to necessary height and contour to correspond with the wheel diameter of the crane. Specify rail size and wheel diameter when ordering. Several other types of crane stops are also available. Lighter duty stops, and stops designed to contact a bumper mounted on the crane are two varieties commonly requested.
Cushion-Slide Crane Stops Drag plates allow wedge to slide some distance to absorb impact. On smaller sizes of rail, plates may interfere with rail hook bolts. Allow sufficient sliding distance between cranes. Stopping distance depends on weight and speed of crane. Do not use at end of crane run. Wheel Contact Type Wedges are made for a specific wheel diameter. Plates are cut to fit a specific rail size and section. www.HarmerSteel.com
[email protected]
Bumper Contact Type Fits most standard crane bumpers. Wedge stands 15" above top of rail. Underside of crane bumpers should be no more that 12" above top of rail. Plates are cut to fit a specific rail size and section. © 2007
(503) 286-3691
FAX (503) 286-2097
III – 3
