APPLICATION Medium aperture wall wash delivers uniform illumination to vertical surfaces using compact fluorescent lamps.
PRODUCT DATA REFLECTOR: Hydroformed heavy gauge aluminum reflector with self trimming flange, with or without aluminum baffle. Available in a wide range of finishes.
HOUSING: The mounting frame is fabricated 18 gauge steel and provides a solid
SERIES 8WHF3Q Open
Wall Wash 8" Aperture Horizontal Fluorescent 3 Lamp Open
structure for the optical and electrical components as well as a platform for decorative attachments. Standard plaster flange allows a one inch ceiling thickness. Custom depths are available.
• Open reflectors are not suitable for air handling plenums
MOUNTING: Adjustable height “C” channel mounting ears allow off center installation and accept a wide variety of hanger bars, see optional accessories.
ELECTRICAL: 120 to 277 volt input 50 to 60 Hz high power factor electronic ballasts are programmed start, under 10% THD. Consult Technical Section for additional ballast operating data. Optional emergency ballast (–EM) operates one lamp for 90 minutes, faceplate with test switch and charger light.
JUNCTION BOX: Heavy gauge galvanized junction box pre-wired to ballast with grounding pigtail. Easy access covers. Multiple conduit knockouts listed for through branch circuit wiring.
SOCKET: Positive latch four pin thermoplastic. 26 watt models feature twist lock sockets. 13 and 18 watt models feature push-in sockets.
LAMP DATA:
LAMP
WATTS BASE BALLAST LUMENS 13 G24q-1 Elec. 900
G24q-2 Elec. G24q-3 Elec.
1250 1800
Standard lamping, initial lumens.
Listed For Wet Location Manufactured and tested to UL#1598 and CSA standards. Under Covered Ceiling Fixtures are not designed for direct contact with insulation.
Rough Opening 8.25"
Catalog #:
/ HF813
8WHF3
Example: HFWW813SCLPF
Example: 8WHF326QE4
Fixture Series Lamp/Wattage
8WHF
QTY. TYPE Quad 3 13Q 3 18Q 3 26Q
Ballast/Voltage
Options
D2 / 277 Dimming (13W dimming not available)
Trim
Trim Finish w/polished flange
HFWW813 – 120° Cutout Wall Wash
E4 / Electronic 120/277 D1 / 120V Dimming
See Below
HFCW813 – Corner Cutout Wall Wash SCLPF – Soft Specular Clear “Alzak” with Polished Flange For white painted flange, drop “PF” from Catalog #. For other finishes, consult reflector section.
Optional Accessories Hanger Bars (set of 2)
q 101782 = #520 Caddy Bars q 9152 = 52" C-Channel q 9127 = 27" C-Channel q 27BH = 27" Solid Bar q 24CBH = 24" one-piece B-Line C-Channel hanger bar q 26UBH = Interlocking adjustable mounting bars, adjust from 14" to 26" Fixture: Project:
Type:
Options q EM = Emergency Battery Pack w/remotely located Test Switch q F = Fused All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail:
[email protected]
Series 8WHF3Q Open Wall Wash - 8" Aperture Horizontal Fluorescent 3 Lamp Open
Quad Tube 18 4-Pin 26
FL22.1 CUCAUL
