Fixture Type
APPROVAL
Lamp Type
Job Ref. / Location
SERIES FF8200S
PRODUCT DATA FRAME IN MODULE – Rugged 20 gauge die formed steel with corrosion resistant (galvanel) finish.
8" Aperture Shallow Plenum Recessed Compact Fluorescent Downlight (2) Horizontal Lamps -13 Watt Twin Tube or 13, 18, 26 Watt Quad Tube
BAR HANGERS – Expandable from 14" to 26", vertically mounted for strength with locking tabs for off-center mounting. Optional 27" solid bar hangers. JUNCTION BOX – with easy access covers, pre-wired with grounding pigtail, listed for through branch circuit wiring, 4 in/4 out, pryout KO's (3) 1/2", (2) 3/4", (2) Romex. ELECTRONIC BALLASTS are supplied standard in a universal voltage input and will operate within a range of 120 volt to 277 volt. This universal voltage is designated as suffix – 4E. These ballasts are high power factor, instant start and operate at under 10% THD (Total Harmonic Distortion) within a frequency range of 50 to 60 Hz (Hertz). All electronic ballasts require the use of 4 pin compact fluorescent lamps. DIMMING BALLASTS – require the use of 4 pin compact fluorescent lamps. ADVANCE or LUTRON may be specified. Consult Sales Department for specific availability & ordering information. Ballast technical information and operating characteristics may be found by consulting the Technical Section of our catalog. SOCKET HOUSING – Die formed aluminum with ventilation slots for efficient lamp performance. Attaches to trim, complete with (2) positive latch four pin thermoplastic sockets.
•
Width 8-5/8" — Rough Opening 7-7/8"
Open reflectors are not suitable for air handling plenums
Maximum Ceiling Thickness 1" Standard with Low-Iridescent finish and Electronic Ballast.
Model Number:
TRIMS Specification grade, Alzak® one piece, "Hydro-Spun" aluminum reflectors with 5/8" self flanging trim ring – painted buff white. Available with optional polished flange. To order specify suffix #-PF. (See Options). Low-Iridescent reflector finish is standard to reduce "rainbow effect" of compact fluorescent lamps. Lens trims are available for wet location applications. See Options.
Specular Alzak® Reflector
Specular Alzak® Cross Blade Louver
❋/SC8 (clear)
❋/SCL8 (clear specular Alzak) ❋/SGL8 (champagne gold specular Alzak) ❋/SWL8 (matte white finish)
❋ Insert fixture type then options (refer to "How to Order" on the reverse side).
OPTIONS (add suffix) SUFFIX #
Self Flanging Polished Trim Ring ..................................................................# – PF Emergency Power Pack: (Illuminates 1 lamp for 90 min.@ 650 lumens) for Electronic & Dimming Ballasts (4 Pin Lamps)...........................................# – FPLT† 27" Solid hanger bars (2/set).....................................................................# – 27BH BALLASTS
120/277 V Electronic Ballast ............................................................................... # – 4E † EM option can only be used in accessible ceilings
Listed For Damp Locations
HOUSING – ELECTRONIC BALLAST CATALOG # 120/277V LAMP TYPE SOCKET STYLE *4 PIN WATTAGE/LAMP
FF8213QS–4E/❋
FF8226S–4E/❋
(2) F13DTT/27K/4P (2) F18DTT/27K/4P (2) F26DTT/27K/4P G24Q1 G24Q2 G24Q3
13
FIXTURE LUMENS (2 LAMPS)
FF8218S–4E/❋
18
26
1720 2500 3600
4 Pin Lamps required for all Electronic and Dimming Ballasts. (*4 Pin Twin Tube Lamps Not Available).
Horizontally lamped fixtures with open reflectors are not be suitable for use in air handling plenums. All products are manufactured in accordance with U.L. standards #1598. Suitable for use in damp locations. All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
FL28.0 CRMNUR
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail:
[email protected]
SERIES FF8200S COMPACT FLUORESCENT COEFFICIENTS OF UTILIZATION
PHOTOMETRICS Plane Spacing Ratio:........ 0 - Deg.........90 - Deg....... 180 - Deg 1.2 1.6 1.3 Specular Aluminum Reflector with Flattened Peened Top and Specular Metal Cross Baffles, Open Bottom. Aperture Diameter:........................................................ 7.56" Lamps: Two 26 Watt Double Twin Tube Compact Fluorescents, Horizontal position. Lumens:...................................................... 3600 (2 X 1800) The 0 Degree Plane is opposite the Sockets.
CANDELA POWER DISTRIBUTION CURVE CATALOG # FF8226S-1H/SCL8
EFFECTIVE FLOOR CAVITY REFLECTANCE = 0.20 Ceiling
Reflect. 80 70 50 30 10 0 Wall Reflect. 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
0 63 63 63 63 62 62 62 62 59 59 59 56 56 56 54 54 54 53
1 59 57 56 54 58 56 55 53 54 53 52 52 51 50 50 49 49 48
2 55 52 49 47 54 51 48 46 49 47 45 47 46 44 46 44 43 42
3 51 46 43 40 50 46 42 40 44 41 39 43 40 39 42 40 38 37
4 47 42 38 35 46 41 38 35 40 37 34 39 36 34 38 35 33 32
5 44 38 34 31 43 37 33 30 36 33 30 35 32 30 34 32 30 29
6 40 34 30 27 40 34 30 27 33 29 27 32 29 26 31 28 26 25
7 38 31 27 24 37 31 27 24 30 26 24 29 26 24 29 26 23 23
8 35 28 24 21 34 28 24 21 27 24 21 27 24 21 26 23 21 20
9 33 26 22 19 32 26 22 19 25 22 19 25 21 19 24 21 19 18
10 31 24 20 18 30 24 20 18 23 20 17 23 20 17 22 19 17 16
ROOM CAVITY RATIO
Total Luminaire Efficiency:............................................. 53.1%
Reflector Multiplier – Champagne Gold Alzak® (FF8226S-1H/SGL8) x .90 (Data prepared by ITL Testing Laboratory)
OUTPUT DATA
CANDELA DISTRIBUTION DEGREES 0.0 45.0 90.0 135.0 180.0 CANDELA
ZONE
0 768 768 768 768 768 5 758 790 816 810 783 76 15 724 812 834 855 773 231 25 669 748 754 775 696 342 35 626 706 751 741 671 455 45 645 640 787 644 614 516 55 301 293 360 268 238 268 65 12 12 28 17 8 20 75 2 2 2 1 1 2 85 0 0 0 0 0 0
0 – 30 0 – 40 0 – 60 0 – 90 90 – 180 0 – 180
90
ZONAL LUMENS SUMMARY
LUMENS 650 1105 1889 1911 0 1911
% LAMP 18.0 30.7 52.5 53.1 0.0 53.1
% FIXT 34.0 57.8 98.8 100.0 0.0 100.0
All candela, lumens, luminance, coefficient of utilization and VCP values in this report are based on relative photometry which assumes a ballast factor of 1.000. Any calculations prepared from these data should include an appropriate ballast factor.
0 0 0 0 0
HOW TO ORDER Frame In
FF 8 2 26 S
–
Ballast
4E
/
Reflector Trim
SCL 8
–
Reflector Options
PF
Horizontal Lamp 8" Aperture 2 Lamp Operation Lamp Wattage Shallow Frame In 120/277 Electronic Ballast Clear Alzak Cross Blade Reflector 8" Aperture Self Flanging Polished Trim Ring
FL28.0 CLUCCR
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail:
[email protected]