Fixture Type
APPROVAL
Lamp Type
Job Ref. / Location
SERIES FF8200
PRODUCT DATA FRAME IN MODULE – Rugged 20 gauge die formed steel with corrosion resistant (galvanel) finish.
8" Aperture Recessed Compact Fluorescent Downlight (2) Horizontal Lamps – 13, 18, 26 Watt Quad Tube
BAR HANGERS – Expandable from 14" to 26", vertically mounted for strength with locking tabs for off-center mounting. Optional 27" solid bar hangers. JUNCTION BOX – with easy access covers, prewired with grounding pigtail, listed for through branch circuit wiring, 4 in/4 out wire, pryout KO's (3) 1/2", (2) 3/4".
Listed For Damp Locations
SOCKET HOUSING – Die formed aluminum with ventilation slots for efficient lamp performance. Attaches to trim, complete with (2) positive latch four pin thermoplastic sockets. See Ballast information on reverse. •
Open reflectors are not suitable for air handling plenums
Available with Non-Iridescent finish. * 15-3/4" for Dual Circuit Operation
Standard with Low Iridescent Finish Width 8-5/8" Rough Opening 7-7/8"
TRIMS Specification grade, Alzak one piece, "Hydro-Spun" aluminum reflectors with 5/8" self flanging trim ring – painted buff white. Available with optional polished flange. To order specify suffix #- PF. Standard with low-iridescent reflector finish to eliminate "rainbow effect" of compact fluorescent lamps. Lens trims are available for wet location applications. See Options. See Special Section for optional reflector colors. ®
Specular Alzak®
❑ ❋/C8 (clear)
White Enamel Reflector
❑ ❋/WC8 (white)
Baffle
❑ ❋/B8 (black baffle, clear Alzak®) ❑ ❋/WB8 (white baffle, clear Alzak®)
LENS TRIMS
Splay glass Fresnel
Splay Corning C73 Tempered Glass
Splay Prismatic Pattern 12, Acrylic
Available for wet location (see options)
Available for wet location (see options)
Available for wet location (see options)
❑ ❋/F8-C (clear Alzak) ❑ ❋/F8 (white)
❑ ❋/C738-C (clear Alzak) ❑ ❋/C738 (white)
❑ ❋/P8-C (clear Alzak) ❑ ❋/P8 (white)
WALL WASH TRIMS
Eyelid Wall Wash
Spread Lens
❑ ❋/W8 (white finish)
❑ ❋/SLW8IR (clear Alzak) ❑ ❋/SLWG8IR (gold Alzak)
Horizontally lamped fixtures with open reflectors are not be suitable for use in air handling plenums. All products are manufactured in accordance with U.L. standards #1598. Suitable for use in damp locations. All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
❋ Insert fixture type then options (refer to "How to Order" on the reverse side).
FL24.0 CLCUUR
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail:
[email protected]
SERIES FF8200 COMPACT FLUORESCENT TECHNICAL DATA
FIXTURE PERFORMANCE
Electronic Ballasts are supplied standard in a universal voltage input and will operate within a range of 120 volt to 277 volt.
Clear Specular Alzak® Reflector (C8) CONE OF LIGHT Clear Wheat Alzak
This universal voltage is designated as suffix – 4E. These ballasts are high power factor, programmed start and operate at under 10% THD (Total Harmonic Distortion) within a frequency range of 50 to 60 Hz (Hertz). Dimming Ballasts – ADVANCE or LUTRON may be specified. Consult Sales Department for specific availability and ordering information. Ballast technical information and operating characteristics may be found by consulting the Technical Section of our catalog.
SPACING CRITERIA 1.0 SMHR • Footcandles to 50% of maximum = Beam Dia.
LAMP TYPE
(2) F13DTT/27K (2) F18DTT/27K (2) F26DTT/27K
WATTAGE/LAMP FIXTURE LUMENS (2 LAMPS)
OPTIONS (add suffix)
CATALOG #
SOCKET *4 PIN STYLE
Initial Footcandles @ NADIR • Distance to Illuminated Plane (30" above floor)
FC/0° (2) (2) (2) Mounting 13 18 26 Beam Height Watt Watt Watt Diameter 8.0' 12.9 15.2 21.9 9.3' 10.0' 7.3 8.5 12.3 12.4' 12.0' 4.6 5.5 7.9 15.6' 14.0' 3.2 3.8 5.5 18.7' 16.0' 2.4 2.8 4.0 21.8'
HOUSING ❑ FF8213/❋
Reflector = (FC x .90)
❑ FF8218/❋
❑ FF8226/❋
G24Q1 G24Q2 G24Q3
❑ Emergency Power Pack: (Illuminates 1 lamp for 90 minutes @ 650 lumens)..................................... # – FPLT ❑ 27" Solid hanger bars (2/set)................................... # – 27BH ❑ Gasketed Lens Trim - Wet Location............................ # – WL
13 18 26 1720 2500 3600
SUFFIX # ❑ Polished, Self Flanging Trim Ring ............................... # – PF
BALLASTS
4 Pin Lamps required for all Electronic and Dimming Ballasts. (*4 Pin Twin Tube Lamps Not Available).
Single Double Circuit Circuit
❑ 120/277 V Electronic Ballast ........................ # – 4E ....... # – 4ED
HOW TO ORDER Frame In Horizontal Lamp 8" Aperture 2 Lamp Operation for single lamp operation change to (1) Lamp Wattage Ballast Type (120/277 V Electronic Ballast)
FF 8 2 26
–
Options
4E
/
Reflector Trim
C 8
–
Reflector Options
PF
Clear Alzak Reflector, Standard with Low-Iridescent Finish 8" Aperture Self Flanging Polished Trim Ring
FL24.0 UCUDUU
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail:
[email protected]
