Fixture Type
APPROVAL
Lamp Type
Job Ref. / Location
SERIES FF7132T 7" Aperture Recessed Compact
PRODUCT DATA FRAME IN MODULE – Rugged 20 gauge die formed steel with corrosion resistant (galvanel) finish.
Fluorescent Downlight for Single 26, 32 or 42 Watt Triple Tube Lamp
BAR HANGERS – Expandable from 14.25" to 26", vertically mounted for strength with locking tabs for off-center mounting. Optional 27" Solid Bar Hanger.
• Open reflectors are not suitable for air handling plenums
JUNCTION BOX – with easy access covers, prewired with grounding pigtail, listed for through branch circuit wiring, 4 in/4 out, pryout KO's (2) 1/2", (2) 3/4".
Also available in Remodel Style (RM)
ELECTRONIC BALLASTS – are supplied standard in a universal voltage input and will operate within a range of 120 volt to 277 volt. This universal voltage is designated as suffix – 4E. These ballasts are high power factor, instant start and operate under 10% THD (Total Harmonic Distortion) within a frequency range of 50 to 60 Hz (Hertz). All electronic ballasts require the use of 4 pin compact fluorescent lamps. DIMMING BALLASTS – require the use of 4 pin compact fluor- escent lamps. ADVANCE or LUTRON may be specified. Consult sales department for specific availability & ordering information. Ballast technical information and operating characteristics may be found by consulting the Technical Section of our catalog.
SOCKET HOUSING – Die formed aluminum with ventilation slots for efficient lamp performance, complete with one positive latch four pin thermoplastic socket. EMERGENCY BATTERY PACK (FPLT) – Operates lamp for 90 minutes @ 650 lumens, nickel cadmium battery.
ERTEK INT CM
C
US LIS TED
Listed Listed For Damp Locations
WIDTH 14-1/4" Standard with Low-Iridescent finish. Rough Opening 6-7/8"
Model Number:
TRIMS Specification grade, Alzak one piece, "Hydro-Spun" aluminum reflectors with 5/8" self flanging trim ring – painted buff white. Available with optional polished flange. To order specify suffix # -PF. (See Options). Low-Iridescent reflector finish is standard to eliminate "rainbow effect" of compact fluorescent lamps. ®
Specular Alzak®
White Enamel Reflector
Specular Alzak® Cross Blade Louver Baffle
Eyelid Wall Wash
❋/C7T (clear) ❋/WC7T (white) ❋/CL7T (clear ❋/B7T (black ❋/W7T (white finish) ❋/G7T (champagne gold) specular Alzak) baffle, clear Alzak) ❋/BCT (black) ❋/GL7T (champagne ❋/BG7T (black ❋/C7TPEW (pewter) gold specular Alzak) baffle, gold Alzak) ❋/C7TBZ (bronze) ❋/WL7T ❋/WB7T (white (matte white finish) baffle, clear Alzak) ❋/WBG7T (white baffle, gold Alzak)
Cutout Wall Wash
Splay Fresnel Glass
Splay Corning C73 Tempered Glass
Splay Pattern 12 Prismatic Acrylic
❋/CWW7T ❋/F7T (white) ❋/C737T ❋/P7T (white Splay) (clear Alzak) (white Splay) (white Splay) ❋/GWW7T (gold Alzak) ❋ Insert fixture type then options (refer to "How to Order" on the reverse side). Horizontally lamped fixtures with open reflectors are not be suitable for use in air handling plenums. All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
FL14.0 CUCAUL
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail:
[email protected]
SERIES FF7132T COMPACT FLUORESCENT LAMP DATA
OPTIONS (add suffix)
32 WATT LAMPS
SUFFIX #
Polished, Self Flanging Trim Ring .............................. # – PF
COLOR
Emergency Power Pack:
(Illuminates 1 lamp for 90 min. @ 650 lumens)
3,000K.... PLT32W/30/4P.... CF32DT/E/830.... F32TBX/SPX30/4P
for Electronic & Dimming Ballasts (4 Pin Lamps)........... # – FPLT 27" Solid hanger bars (2/set).................................. # – 27BH Gasketed Lens Trim - Wet Location........................... # – WL
PHILIPS
OSRAM
G.E.
2,700................n/a.............. CF32DT/E/827.... F32TBX/SPX27/4P
3,500K.... PLT32W/35/4P.... CF32DT/E/835.... F32TBX/SPX35/4P 4,100K.... PLT32W/41/4P.... CF32DT/E/841.... F32TBX/SPX41/4P
120V Dimming (Lutron Hi-Lume)............................... # – 1DML 277V Dimming (Lutron Hi-Lume)............................... # – 2DML 120/277V Dimming (Advance Mark VII ).................. # – 4DMA Single Circuit Double Circuit BALLASTS 120/277 V Electronic Ballast ..................... # – 4E ............# – 4ED
HOW TO ORDER Frame In
RM – FF7 1 32 T
–
Ballast
4E
/
Reflector Trim
C 7 T
–
Reflector Options
PF
Optional Remodel Style HousingHorizontal 7" Aperture Single (1) Lamp Operation 26, 32 or 42 Watts Triple Tube Lamp 120/277 Electronic Ballast Clear Alzak 7" Aperture Style ("T" Triple Tube Configuration) Self Flanging Polished Trim Ring
APPROVAL:
FL14.0 CUUUUB
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail:
[email protected]