M.I.W. Newsletter J AN UAR Y
20 09
Inlet Filter, Ducting & Silencer Project Profile This project requires us to design, fabricate, deliver, and install, an Inlet Air Filter House for addition to an existing GE Frame 5 Turbine System. Moran Iron Works, Inc. is also providing on-site labor and equipment to remove and transport the Inlet Ducting Modules to our shop for repair. Includes removing and replacing deteriorated structure and sheeting, installing new insulation, sandblasting, and applying a (2) part paint system to interior and exterior of the Inlet Bell, Duct Transition, Duct Elbow, (2) Duct Wing sections, and a Roof Panel section. We also re-
moved Inlet Silencer Baffles, removed and replaced deteriorated structure, sheeting, perforated metal materials, screen, and insulation as required on Silencer Baffles and Silencer Casing sections, sandblasted and applied the (2) part paint system to the interior and exterior of Inlet Silencer sections. Moran Iron Works, Inc. will also provide on-site labor and equipment to transport modules back to the project site and reinstall on the existing unit.
Moran Iron Works, Inc. PO Box 732 • Onaway, MI 49765 Ph: 989.733.2011 • FX: 989.733.2371 www.moraniron.com Editor Kristi Hoerner - Quality & Safety
•
e-mail:
[email protected]
(Pg. 1 of 2)
M.I.W. NEWSLETTER—JANUARY 2009
(PG 2 OF 2)
Project Complete! Over 300 tons and completed in under 21 weeks. The project required us to fabricate (15) Pulse Jet Baghouse Modules, with hoppers and tube sheets, install free issue pulse piping system, and the exterior of all components were blasted and painted. Shipped completely assembled and ready for installation via truck. Just one of our recent successful Baghouse Projects. For more information please contact:
[email protected]
Experience You Can Count On With a combined experience of 56 years with Moran Iron Works, Inc. and over 80 years experience in the industry, these are the guys you know you can count on. With their experience in Project Management, Supervision, Certified Welding Inspections, Fabrication, Welding Procedures, Non Destructive Testing, and Certified Crane Operations, they know how to make sure our customers are getting the Quality Service and Products they deserve. (Top) Guy Post, CWI - 20 Years exp. (Left) Kurt LaLonde, CWI - 25 Years exp. (Bottom Right) Gerald Ganske, General Manager - 37 Years exp.
www.moraniron.com
