102

APPLICATION Vertical lamp T4 halogen cylinder for use in medium to high ceilings. This multireflector optical system is ...

0 downloads 106 Views 148KB Size
APPLICATION Vertical lamp T4 halogen cylinder for use in medium to high ceilings. This multireflector optical system is highly efficient and produces uniform distribution while minimizing brightness.

PRODUCT DATA

SERIES C6PIT 100-250 Watt T4 Halogen

REFLECTOR: Dual reflector system controls light output and maximizes brightness in these small aperture cylinders. Multiple distributions and interchangeable reflector systems add the flexibility to compensate for changes in the space, even after installation. Lower reflector is available in multiple finishes. Upper reflector is specular clear alzak.

Quartz - 8" x 16" Pendant Mount Cylinder

HOUSING: The cylindrical housing is heavy gauge aluminum and finished to an

architectural grade with no visible fasteners. The standard exterior finish is matte white, powder coat paint. The cylinder is suspended by half inch pendant. (See below.) ELECTRICAL: Standard fixture is 120 VAC, rated for 250 Watts maximum. SOCKET: Ceramic socket with miniature candelabra screw base. LAMP DATA: 100W, 150W, or 250W T4 Halogen Minican (miniature candelabra screw base) by others. LAMP

WATTS

BASE

LIFE HRS.

LUMENS

100Q/CL(ESN)

100

MINI-CAN

1000

1900

150Q/CL(ETG)

150

MINI-CAN

2000

2800

250Q/CL(EHT)

250

MINI-CAN

2000

5000

Wall Mount

Inside lamp, initial lumens

MOUNTING:

Pendant Mount – Swivel mount canopy allows cylinder to hang plumb up to 30° sloped ceiling stem 3/8" IPS (specify length). Canopy adds 1.5" to overall length. Standard finish white powder coat. Specify Pendant as follows:

EXAMPLE:

Coiled Cord Mount

PK 24 W 5" 1-7/16"

16.09"

Cable Mount – Supplied with 10' field adjustable aviation cable and either straight or coiled cord. Ceiling canopy to match finish on cylinder housing.

Specify stem length in increments of 12"

Manufactured and tested to UL#1598 and CSA standards. Note: Suitable for damp location.

6" 7.13" 8"

Pendant Mount

Catalog #: C6PIT

/ Fixture Series

Lamp/Wattage

Ballast/Voltage

Pendant – C6PI



Cable

– C6A*I

Wall

– C6W I

120V Standard

T4250

Options

See Options Below

A1 = Straight White Cord, A2 = Straight Black Cord, A3 = Coiled White Cord, A4 = Coiled Black Cord

Optional Finishes

Project:

Trim

Trim Finish

6VIT4ND – Narrow Distribution Lens 6VIT4MD – Medium Distribution Lens 6VIT4WD – Wide Distribution Lens SCLPF – Soft Specular Clear Alzak with Polished Flangek For other finishes, consult reflector section.

Suffix #

❑ Black Cylinder Housing .............. – B ❑ Bronze Cylinder Housing ............ – Z ❑ Galvanite..................................... – GAL Fixture:

/

6VI Example: 6VIT4NDSCLPF / PK12W

Example: C6PIT4250120

❑ Satin Aluminum ................ – SA ❑ Metallic Aluminum ............ – MA

Type:

All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected]

Series C6PIT - 100-250 Watt T4 Halogen Quartz - 8" x 16" Pendant Mount Cylinder

Swivel Pendant Kit Stem Length in inches (add 1.5" for canopy) White Finish

For Damp Locations

Straight Cord Mount

SF1.4

CNCAUM